1Linux Magic System Request Key Hacks 2Documentation for sysrq.c 3 4* What is the magic SysRq key? 5~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 6It is a 'magical' key combo you can hit which the kernel will respond to 7regardless of whatever else it is doing, unless it is completely locked up. 8 9* How do I enable the magic SysRq key? 10~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 11You need to say "yes" to 'Magic SysRq key (CONFIG_MAGIC_SYSRQ)' when 12configuring the kernel. When running a kernel with SysRq compiled in, 13/proc/sys/kernel/sysrq controls the functions allowed to be invoked via 14the SysRq key. By default the file contains 1 which means that every 15possible SysRq request is allowed (in older versions SysRq was disabled 16by default, and you were required to specifically enable it at run-time 17but this is not the case any more). Here is the list of possible values 18in /proc/sys/kernel/sysrq: 19 0 - disable sysrq completely 20 1 - enable all functions of sysrq 21 >1 - bitmask of allowed sysrq functions (see below for detailed function 22 description): 23 2 - enable control of console logging level 24 4 - enable control of keyboard (SAK, unraw) 25 8 - enable debugging dumps of processes etc. 26 16 - enable sync command 27 32 - enable remount read-only 28 64 - enable signalling of processes (term, kill, oom-kill) 29 128 - allow reboot/poweroff 30 256 - allow nicing of all RT tasks 31 32You can set the value in the file by the following command: 33 echo "number" >/proc/sys/kernel/sysrq 34 35Note that the value of /proc/sys/kernel/sysrq influences only the invocation 36via a keyboard. Invocation of any operation via /proc/sysrq-trigger is always 37allowed (by a user with admin privileges). 38 39* How do I use the magic SysRq key? 40~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 41On x86 - You press the key combo 'ALT-SysRq-<command key>'. Note - Some 42 keyboards may not have a key labeled 'SysRq'. The 'SysRq' key is 43 also known as the 'Print Screen' key. Also some keyboards cannot 44 handle so many keys being pressed at the same time, so you might 45 have better luck with "press Alt", "press SysRq", "release SysRq", 46 "press <command key>", release everything. 47 48On SPARC - You press 'ALT-STOP-<command key>', I believe. 49 50On the serial console (PC style standard serial ports only) - 51 You send a BREAK, then within 5 seconds a command key. Sending 52 BREAK twice is interpreted as a normal BREAK. 53 54On PowerPC - Press 'ALT - Print Screen (or F13) - <command key>, 55 Print Screen (or F13) - <command key> may suffice. 56 57On other - If you know of the key combos for other architectures, please 58 let me know so I can add them to this section. 59 60On all - write a character to /proc/sysrq-trigger. e.g.: 61 62 echo t > /proc/sysrq-trigger 63 64* What are the 'command' keys? 65~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 66'b' - Will immediately reboot the system without syncing or unmounting 67 your disks. 68 69'c' - Will perform a system crash by a NULL pointer dereference. 70 A crashdump will be taken if configured. 71 72'd' - Shows all locks that are held. 73 74'e' - Send a SIGTERM to all processes, except for init. 75 76'f' - Will call oom_kill to kill a memory hog process. 77 78'g' - Used by kgdb on ppc and sh platforms. 79 80'h' - Will display help (actually any other key than those listed 81 here will display help. but 'h' is easy to remember :-) 82 83'i' - Send a SIGKILL to all processes, except for init. 84 85'j' - Forcibly "Just thaw it" - filesystems frozen by the FIFREEZE ioctl. 86 87'k' - Secure Access Key (SAK) Kills all programs on the current virtual 88 console. NOTE: See important comments below in SAK section. 89 90'l' - Shows a stack backtrace for all active CPUs. 91 92'm' - Will dump current memory info to your console. 93 94'n' - Used to make RT tasks nice-able 95 96'o' - Will shut your system off (if configured and supported). 97 98'p' - Will dump the current registers and flags to your console. 99 100'q' - Will dump per CPU lists of all armed hrtimers (but NOT regular 101 timer_list timers) and detailed information about all 102 clockevent devices. 103 104'r' - Turns off keyboard raw mode and sets it to XLATE. 105 106's' - Will attempt to sync all mounted filesystems. 107 108't' - Will dump a list of current tasks and their information to your 109 console. 110 111'u' - Will attempt to remount all mounted filesystems read-only. 112 113'v' - Dumps Voyager SMP processor info to your console. 114 115'w' - Dumps tasks that are in uninterruptable (blocked) state. 116 117'x' - Used by xmon interface on ppc/powerpc platforms. 118 119'z' - Dump the ftrace buffer 120 121'0'-'9' - Sets the console log level, controlling which kernel messages 122 will be printed to your console. ('0', for example would make 123 it so that only emergency messages like PANICs or OOPSes would 124 make it to your console.) 125 126* Okay, so what can I use them for? 127~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 128Well, un'R'aw is very handy when your X server or a svgalib program crashes. 129 130sa'K' (Secure Access Key) is useful when you want to be sure there is no 131trojan program running at console which could grab your password 132when you would try to login. It will kill all programs on given console, 133thus letting you make sure that the login prompt you see is actually 134the one from init, not some trojan program. 135IMPORTANT: In its true form it is not a true SAK like the one in a :IMPORTANT 136IMPORTANT: c2 compliant system, and it should not be mistaken as :IMPORTANT 137IMPORTANT: such. :IMPORTANT 138 It seems others find it useful as (System Attention Key) which is 139useful when you want to exit a program that will not let you switch consoles. 140(For example, X or a svgalib program.) 141 142re'B'oot is good when you're unable to shut down. But you should also 'S'ync 143and 'U'mount first. 144 145'C'rash can be used to manually trigger a crashdump when the system is hung. 146Note that this just triggers a crash if there is no dump mechanism available. 147 148'S'ync is great when your system is locked up, it allows you to sync your 149disks and will certainly lessen the chance of data loss and fscking. Note 150that the sync hasn't taken place until you see the "OK" and "Done" appear 151on the screen. (If the kernel is really in strife, you may not ever get the 152OK or Done message...) 153 154'U'mount is basically useful in the same ways as 'S'ync. I generally 'S'ync, 155'U'mount, then re'B'oot when my system locks. It's saved me many a fsck. 156Again, the unmount (remount read-only) hasn't taken place until you see the 157"OK" and "Done" message appear on the screen. 158 159The loglevels '0'-'9' are useful when your console is being flooded with 160kernel messages you do not want to see. Selecting '0' will prevent all but 161the most urgent kernel messages from reaching your console. (They will 162still be logged if syslogd/klogd are alive, though.) 163 164t'E'rm and k'I'll are useful if you have some sort of runaway process you 165are unable to kill any other way, especially if it's spawning other 166processes. 167 168"'J'ust thaw it" is useful if your system becomes unresponsive due to a frozen 169(probably root) filesystem via the FIFREEZE ioctl. 170 171* Sometimes SysRq seems to get 'stuck' after using it, what can I do? 172~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 173That happens to me, also. I've found that tapping shift, alt, and control 174on both sides of the keyboard, and hitting an invalid sysrq sequence again 175will fix the problem. (i.e., something like alt-sysrq-z). Switching to another 176virtual console (ALT+Fn) and then back again should also help. 177 178* I hit SysRq, but nothing seems to happen, what's wrong? 179~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 180There are some keyboards that produce a different keycode for SysRq than the 181pre-defined value of 99 (see KEY_SYSRQ in include/linux/input.h), or which 182don't have a SysRq key at all. In these cases, run 'showkey -s' to find an 183appropriate scancode sequence, and use 'setkeycodes <sequence> 99' to map 184this sequence to the usual SysRq code (e.g., 'setkeycodes e05b 99'). It's 185probably best to put this command in a boot script. Oh, and by the way, you 186exit 'showkey' by not typing anything for ten seconds. 187 188* I want to add SysRQ key events to a module, how does it work? 189~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 190In order to register a basic function with the table, you must first include 191the header 'include/linux/sysrq.h', this will define everything else you need. 192Next, you must create a sysrq_key_op struct, and populate it with A) the key 193handler function you will use, B) a help_msg string, that will print when SysRQ 194prints help, and C) an action_msg string, that will print right before your 195handler is called. Your handler must conform to the prototype in 'sysrq.h'. 196 197After the sysrq_key_op is created, you can call the kernel function 198register_sysrq_key(int key, struct sysrq_key_op *op_p); this will 199register the operation pointed to by 'op_p' at table key 'key', 200if that slot in the table is blank. At module unload time, you must call 201the function unregister_sysrq_key(int key, struct sysrq_key_op *op_p), which 202will remove the key op pointed to by 'op_p' from the key 'key', if and only if 203it is currently registered in that slot. This is in case the slot has been 204overwritten since you registered it. 205 206The Magic SysRQ system works by registering key operations against a key op 207lookup table, which is defined in 'drivers/char/sysrq.c'. This key table has 208a number of operations registered into it at compile time, but is mutable, 209and 2 functions are exported for interface to it: 210 register_sysrq_key and unregister_sysrq_key. 211Of course, never ever leave an invalid pointer in the table. I.e., when 212your module that called register_sysrq_key() exits, it must call 213unregister_sysrq_key() to clean up the sysrq key table entry that it used. 214Null pointers in the table are always safe. :) 215 216If for some reason you feel the need to call the handle_sysrq function from 217within a function called by handle_sysrq, you must be aware that you are in 218a lock (you are also in an interrupt handler, which means don't sleep!), so 219you must call __handle_sysrq_nolock instead. 220 221* When I hit a SysRq key combination only the header appears on the console? 222~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 223Sysrq output is subject to the same console loglevel control as all 224other console output. This means that if the kernel was booted 'quiet' 225as is common on distro kernels the output may not appear on the actual 226console, even though it will appear in the dmesg buffer, and be accessible 227via the dmesg command and to the consumers of /proc/kmsg. As a specific 228exception the header line from the sysrq command is passed to all console 229consumers as if the current loglevel was maximum. If only the header 230is emitted it is almost certain that the kernel loglevel is too low. 231Should you require the output on the console channel then you will need 232to temporarily up the console loglevel using alt-sysrq-8 or: 233 234 echo 8 > /proc/sysrq-trigger 235 236Remember to return the loglevel to normal after triggering the sysrq 237command you are interested in. 238 239* I have more questions, who can I ask? 240~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 241And I'll answer any questions about the registration system you got, also 242responding as soon as possible. 243 -Crutcher 244 245* Credits 246~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 247Written by Mydraal <vulpyne@vulpyne.net> 248Updated by Adam Sulmicki <adam@cfar.umd.edu> 249Updated by Jeremy M. Dolan <jmd@turbogeek.org> 2001/01/28 10:15:59 250Added to by Crutcher Dunnavant <crutcher+kernel@datastacks.com> 251