1/*****************************************/ 2Kernel Connector. 3/*****************************************/ 4 5Kernel connector - new netlink based userspace <-> kernel space easy 6to use communication module. 7 8The Connector driver makes it easy to connect various agents using a 9netlink based network. One must register a callback and an identifier. 10When the driver receives a special netlink message with the appropriate 11identifier, the appropriate callback will be called. 12 13From the userspace point of view it's quite straightforward: 14 15 socket(); 16 bind(); 17 send(); 18 recv(); 19 20But if kernelspace wants to use the full power of such connections, the 21driver writer must create special sockets, must know about struct sk_buff 22handling, etc... The Connector driver allows any kernelspace agents to use 23netlink based networking for inter-process communication in a significantly 24easier way: 25 26int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *)); 27void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask); 28 29struct cb_id 30{ 31 __u32 idx; 32 __u32 val; 33}; 34 35idx and val are unique identifiers which must be registered in the 36connector.h header for in-kernel usage. void (*callback) (void *) is a 37callback function which will be called when a message with above idx.val 38is received by the connector core. The argument for that function must 39be dereferenced to struct cn_msg *. 40 41struct cn_msg 42{ 43 struct cb_id id; 44 45 __u32 seq; 46 __u32 ack; 47 48 __u32 len; /* Length of the following data */ 49 __u8 data[0]; 50}; 51 52/*****************************************/ 53Connector interfaces. 54/*****************************************/ 55 56int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *)); 57 58 Registers new callback with connector core. 59 60 struct cb_id *id - unique connector's user identifier. 61 It must be registered in connector.h for legal in-kernel users. 62 char *name - connector's callback symbolic name. 63 void (*callback) (struct cn..) - connector's callback. 64 cn_msg and the sender's credentials 65 66 67void cn_del_callback(struct cb_id *id); 68 69 Unregisters new callback with connector core. 70 71 struct cb_id *id - unique connector's user identifier. 72 73 74int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask); 75 76 Sends message to the specified groups. It can be safely called from 77 softirq context, but may silently fail under strong memory pressure. 78 If there are no listeners for given group -ESRCH can be returned. 79 80 struct cn_msg * - message header(with attached data). 81 u32 __group - destination group. 82 If __group is zero, then appropriate group will 83 be searched through all registered connector users, 84 and message will be delivered to the group which was 85 created for user with the same ID as in msg. 86 If __group is not zero, then message will be delivered 87 to the specified group. 88 int gfp_mask - GFP mask. 89 90 Note: When registering new callback user, connector core assigns 91 netlink group to the user which is equal to its id.idx. 92 93/*****************************************/ 94Protocol description. 95/*****************************************/ 96 97The current framework offers a transport layer with fixed headers. The 98recommended protocol which uses such a header is as following: 99 100msg->seq and msg->ack are used to determine message genealogy. When 101someone sends a message, they use a locally unique sequence and random 102acknowledge number. The sequence number may be copied into 103nlmsghdr->nlmsg_seq too. 104 105The sequence number is incremented with each message sent. 106 107If you expect a reply to the message, then the sequence number in the 108received message MUST be the same as in the original message, and the 109acknowledge number MUST be the same + 1. 110 111If we receive a message and its sequence number is not equal to one we 112are expecting, then it is a new message. If we receive a message and 113its sequence number is the same as one we are expecting, but its 114acknowledge is not equal to the acknowledge number in the original 115message + 1, then it is a new message. 116 117Obviously, the protocol header contains the above id. 118 119The connector allows event notification in the following form: kernel 120driver or userspace process can ask connector to notify it when 121selected ids will be turned on or off (registered or unregistered its 122callback). It is done by sending a special command to the connector 123driver (it also registers itself with id={-1, -1}). 124 125As example of this usage can be found in the cn_test.c module which 126uses the connector to request notification and to send messages. 127 128/*****************************************/ 129Reliability. 130/*****************************************/ 131 132Netlink itself is not a reliable protocol. That means that messages can 133be lost due to memory pressure or process' receiving queue overflowed, 134so caller is warned that it must be prepared. That is why the struct 135cn_msg [main connector's message header] contains u32 seq and u32 ack 136fields. 137 138/*****************************************/ 139Userspace usage. 140/*****************************************/ 141 1422.6.14 has a new netlink socket implementation, which by default does not 143allow people to send data to netlink groups other than 1. 144So, if you wish to use a netlink socket (for example using connector) 145with a different group number, the userspace application must subscribe to 146that group first. It can be achieved by the following pseudocode: 147 148s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); 149 150l_local.nl_family = AF_NETLINK; 151l_local.nl_groups = 12345; 152l_local.nl_pid = 0; 153 154if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) { 155 perror("bind"); 156 close(s); 157 return -1; 158} 159 160{ 161 int on = l_local.nl_groups; 162 setsockopt(s, 270, 1, &on, sizeof(on)); 163} 164 165Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket 166option. To drop a multicast subscription, one should call the above socket 167option with the NETLINK_DROP_MEMBERSHIP parameter which is defined as 0. 168 1692.6.14 netlink code only allows to select a group which is less or equal to 170the maximum group number, which is used at netlink_kernel_create() time. 171In case of connector it is CN_NETLINK_USERS + 0xf, so if you want to use 172group number 12345, you must increment CN_NETLINK_USERS to that number. 173Additional 0xf numbers are allocated to be used by non-in-kernel users. 174 175Due to this limitation, group 0xffffffff does not work now, so one can 176not use add/remove connector's group notifications, but as far as I know, 177only cn_test.c test module used it. 178 179Some work in netlink area is still being done, so things can be changed in 1802.6.15 timeframe, if it will happen, documentation will be updated for that 181kernel. 182