1############################################################################### 2# $Id: pptpd.conf,v 1.10 2006/09/04 23:30:57 quozl Exp $ 3# 4# Sample Poptop configuration file /etc/pptpd.conf 5# 6# Changes are effective when pptpd is restarted. 7############################################################################### 8 9# TAG: ppp 10# Path to the pppd program, default '/usr/sbin/pppd' on Linux 11# 12#ppp /usr/sbin/pppd 13 14# TAG: option 15# Specifies the location of the PPP options file. 16# By default PPP looks in '/etc/ppp/options' 17# 18option /etc/ppp/options.pptpd 19 20# TAG: debug 21# Turns on (more) debugging to syslog 22# 23#debug 24 25# TAG: stimeout 26# Specifies timeout (in seconds) on starting ctrl connection 27# 28# stimeout 10 29 30# TAG: noipparam 31# Suppress the passing of the client's IP address to PPP, which is 32# done by default otherwise. 33# 34#noipparam 35 36# TAG: logwtmp 37# Use wtmp(5) to record client connections and disconnections. 38# 39logwtmp 40 41# TAG: bcrelay <if> 42# Turns on broadcast relay to clients from interface <if> 43# 44#bcrelay eth1 45 46# TAG: delegate 47# Delegates the allocation of client IP addresses to pppd. 48# 49# Without this option, which is the default, pptpd manages the list of 50# IP addresses for clients and passes the next free address to pppd. 51# With this option, pptpd does not pass an address, and so pppd may use 52# radius or chap-secrets to allocate an address. 53# 54#delegate 55 56# TAG: connections 57# Limits the number of client connections that may be accepted. 58# 59# If pptpd is allocating IP addresses (e.g. delegate is not 60# used) then the number of connections is also limited by the 61# remoteip option. The default is 100. 62#connections 100 63 64# TAG: localip 65# TAG: remoteip 66# Specifies the local and remote IP address ranges. 67# 68# These options are ignored if delegate option is set. 69# 70# Any addresses work as long as the local machine takes care of the 71# routing. But if you want to use MS-Windows networking, you should 72# use IP addresses out of the LAN address space and use the proxyarp 73# option in the pppd options file, or run bcrelay. 74# 75# You can specify single IP addresses seperated by commas or you can 76# specify ranges, or both. For example: 77# 78# 192.168.0.234,192.168.0.245-249,192.168.0.254 79# 80# IMPORTANT RESTRICTIONS: 81# 82# 1. No spaces are permitted between commas or within addresses. 83# 84# 2. If you give more IP addresses than the value of connections, 85# it will start at the beginning of the list and go until it 86# gets connections IPs. Others will be ignored. 87# 88# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238, 89# you must type 234-238 if you mean this. 90# 91# 4. If you give a single localIP, that's ok - all local IPs will 92# be set to the given one. You MUST still give at least one remote 93# IP for each simultaneous client. 94# 95# (Recommended) 96#localip 192.168.0.1 97#remoteip 192.168.0.234-238,192.168.0.245 98# or 99#localip 192.168.0.234-238,192.168.0.245 100#remoteip 192.168.1.234-238,192.168.1.245 101