1# Makefile.in generated by automake 1.11.6 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 5# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software 6# Foundation, Inc. 7# This Makefile.in is free software; the Free Software Foundation 8# gives unlimited permission to copy and/or distribute it, 9# with or without modifications, as long as this notice is preserved. 10 11# This program is distributed in the hope that it will be useful, 12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 14# PARTICULAR PURPOSE. 15 16@SET_MAKE@ 17 18# 19# OpenVPN -- An application to securely tunnel IP networks 20# over a single UDP port, with support for SSL/TLS-based 21# session authentication and key exchange, 22# packet encryption, packet authentication, and 23# packet compression. 24# 25# Copyright (C) 2002-2010 OpenVPN Technologies, Inc. <sales@openvpn.net> 26# Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com> 27# 28 29VPATH = @srcdir@ 30am__make_dryrun = \ 31 { \ 32 am__dry=no; \ 33 case $$MAKEFLAGS in \ 34 *\\[\ \ ]*) \ 35 echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ 36 | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ 37 *) \ 38 for am__flg in $$MAKEFLAGS; do \ 39 case $$am__flg in \ 40 *=*|--*) ;; \ 41 *n*) am__dry=yes; break;; \ 42 esac; \ 43 done;; \ 44 esac; \ 45 test $$am__dry = yes; \ 46 } 47pkgdatadir = $(datadir)/@PACKAGE@ 48pkgincludedir = $(includedir)/@PACKAGE@ 49pkglibdir = $(libdir)/@PACKAGE@ 50pkglibexecdir = $(libexecdir)/@PACKAGE@ 51am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 52install_sh_DATA = $(install_sh) -c -m 644 53install_sh_PROGRAM = $(install_sh) -c 54install_sh_SCRIPT = $(install_sh) -c 55INSTALL_HEADER = $(INSTALL_DATA) 56transform = $(program_transform_name) 57NORMAL_INSTALL = : 58PRE_INSTALL = : 59POST_INSTALL = : 60NORMAL_UNINSTALL = : 61PRE_UNINSTALL = : 62POST_UNINSTALL = : 63build_triplet = @build@ 64host_triplet = @host@ 65@WIN32_TRUE@am__append_1 = openvpn.8 66subdir = doc 67DIST_COMMON = $(am__dist_noinst_DATA_DIST) $(dist_doc_DATA) \ 68 $(dist_man_MANS) $(srcdir)/Makefile.am $(srcdir)/Makefile.in 69ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 70am__aclocal_m4_deps = $(top_srcdir)/m4/ax_emptyarray.m4 \ 71 $(top_srcdir)/m4/ax_socklen_t.m4 \ 72 $(top_srcdir)/m4/ax_varargs.m4 $(top_srcdir)/m4/libtool.m4 \ 73 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 74 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 75 $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/version.m4 \ 76 $(top_srcdir)/compat.m4 $(top_srcdir)/configure.ac 77am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 78 $(ACLOCAL_M4) 79mkinstalldirs = $(install_sh) -d 80CONFIG_HEADER = $(top_builddir)/config.h 81CONFIG_CLEAN_FILES = 82CONFIG_CLEAN_VPATH_FILES = 83SOURCES = 84DIST_SOURCES = 85am__can_run_installinfo = \ 86 case $$AM_UPDATE_INFO_DIR in \ 87 n|no|NO) false;; \ 88 *) (install-info --version) >/dev/null 2>&1;; \ 89 esac 90am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 91am__vpath_adj = case $$p in \ 92 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 93 *) f=$$p;; \ 94 esac; 95am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 96am__install_max = 40 97am__nobase_strip_setup = \ 98 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 99am__nobase_strip = \ 100 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 101am__nobase_list = $(am__nobase_strip_setup); \ 102 for p in $$list; do echo "$$p $$p"; done | \ 103 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 104 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 105 if (++n[$$2] == $(am__install_max)) \ 106 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 107 END { for (dir in files) print dir, files[dir] }' 108am__base_list = \ 109 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 110 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 111am__uninstall_files_from_dir = { \ 112 test -z "$$files" \ 113 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 114 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 115 $(am__cd) "$$dir" && rm -f $$files; }; \ 116 } 117man8dir = $(mandir)/man8 118am__installdirs = "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)" \ 119 "$(DESTDIR)$(htmldir)" 120NROFF = nroff 121MANS = $(dist_man_MANS) 122am__dist_noinst_DATA_DIST = README.plugins openvpn.8 123DATA = $(dist_doc_DATA) $(dist_noinst_DATA) $(nodist_html_DATA) 124DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 125ACLOCAL = @ACLOCAL@ 126AMTAR = @AMTAR@ 127AR = @AR@ 128AS = @AS@ 129AUTOCONF = @AUTOCONF@ 130AUTOHEADER = @AUTOHEADER@ 131AUTOMAKE = @AUTOMAKE@ 132AWK = @AWK@ 133CC = @CC@ 134CCDEPMODE = @CCDEPMODE@ 135CFLAGS = @CFLAGS@ 136CPP = @CPP@ 137CPPFLAGS = @CPPFLAGS@ 138CYGPATH_W = @CYGPATH_W@ 139DEFS = @DEFS@ 140DEPDIR = @DEPDIR@ 141DLLTOOL = @DLLTOOL@ 142DL_LIBS = @DL_LIBS@ 143DSYMUTIL = @DSYMUTIL@ 144DUMPBIN = @DUMPBIN@ 145ECHO_C = @ECHO_C@ 146ECHO_N = @ECHO_N@ 147ECHO_T = @ECHO_T@ 148EGREP = @EGREP@ 149EXEEXT = @EXEEXT@ 150FGREP = @FGREP@ 151GIT = @GIT@ 152GREP = @GREP@ 153IFCONFIG = @IFCONFIG@ 154INSTALL = @INSTALL@ 155INSTALL_DATA = @INSTALL_DATA@ 156INSTALL_PROGRAM = @INSTALL_PROGRAM@ 157INSTALL_SCRIPT = @INSTALL_SCRIPT@ 158INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 159IPROUTE = @IPROUTE@ 160LD = @LD@ 161LDFLAGS = @LDFLAGS@ 162LIBOBJS = @LIBOBJS@ 163LIBPAM_CFLAGS = @LIBPAM_CFLAGS@ 164LIBPAM_LIBS = @LIBPAM_LIBS@ 165LIBS = @LIBS@ 166LIBTOOL = @LIBTOOL@ 167LIPO = @LIPO@ 168LN_S = @LN_S@ 169LTLIBOBJS = @LTLIBOBJS@ 170LZO_CFLAGS = @LZO_CFLAGS@ 171LZO_LIBS = @LZO_LIBS@ 172MAKEINFO = @MAKEINFO@ 173MAN2HTML = @MAN2HTML@ 174MANIFEST_TOOL = @MANIFEST_TOOL@ 175MKDIR_P = @MKDIR_P@ 176NETSTAT = @NETSTAT@ 177NM = @NM@ 178NMEDIT = @NMEDIT@ 179OBJDUMP = @OBJDUMP@ 180OBJEXT = @OBJEXT@ 181OPENSSL_CRYPTO_CFLAGS = @OPENSSL_CRYPTO_CFLAGS@ 182OPENSSL_CRYPTO_LIBS = @OPENSSL_CRYPTO_LIBS@ 183OPENSSL_SSL_CFLAGS = @OPENSSL_SSL_CFLAGS@ 184OPENSSL_SSL_LIBS = @OPENSSL_SSL_LIBS@ 185OPTIONAL_CRYPTO_CFLAGS = @OPTIONAL_CRYPTO_CFLAGS@ 186OPTIONAL_CRYPTO_LIBS = @OPTIONAL_CRYPTO_LIBS@ 187OPTIONAL_DL_LIBS = @OPTIONAL_DL_LIBS@ 188OPTIONAL_LZO_CFLAGS = @OPTIONAL_LZO_CFLAGS@ 189OPTIONAL_LZO_LIBS = @OPTIONAL_LZO_LIBS@ 190OPTIONAL_PKCS11_HELPER_CFLAGS = @OPTIONAL_PKCS11_HELPER_CFLAGS@ 191OPTIONAL_PKCS11_HELPER_LIBS = @OPTIONAL_PKCS11_HELPER_LIBS@ 192OPTIONAL_SELINUX_LIBS = @OPTIONAL_SELINUX_LIBS@ 193OTOOL = @OTOOL@ 194OTOOL64 = @OTOOL64@ 195PACKAGE = @PACKAGE@ 196PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 197PACKAGE_NAME = @PACKAGE_NAME@ 198PACKAGE_STRING = @PACKAGE_STRING@ 199PACKAGE_TARNAME = @PACKAGE_TARNAME@ 200PACKAGE_URL = @PACKAGE_URL@ 201PACKAGE_VERSION = @PACKAGE_VERSION@ 202PATH_SEPARATOR = @PATH_SEPARATOR@ 203PKCS11_HELPER_CFLAGS = @PKCS11_HELPER_CFLAGS@ 204PKCS11_HELPER_LIBS = @PKCS11_HELPER_LIBS@ 205PKG_CONFIG = @PKG_CONFIG@ 206PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 207PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 208PLUGIN_AUTH_PAM_CFLAGS = @PLUGIN_AUTH_PAM_CFLAGS@ 209PLUGIN_AUTH_PAM_LIBS = @PLUGIN_AUTH_PAM_LIBS@ 210POLARSSL_CFLAGS = @POLARSSL_CFLAGS@ 211POLARSSL_LIBS = @POLARSSL_LIBS@ 212RANLIB = @RANLIB@ 213RC = @RC@ 214ROUTE = @ROUTE@ 215SED = @SED@ 216SELINUX_LIBS = @SELINUX_LIBS@ 217SET_MAKE = @SET_MAKE@ 218SHELL = @SHELL@ 219SOCKETS_LIBS = @SOCKETS_LIBS@ 220STRIP = @STRIP@ 221TAP_CFLAGS = @TAP_CFLAGS@ 222TAP_WIN_COMPONENT_ID = @TAP_WIN_COMPONENT_ID@ 223TAP_WIN_MIN_MAJOR = @TAP_WIN_MIN_MAJOR@ 224TAP_WIN_MIN_MINOR = @TAP_WIN_MIN_MINOR@ 225VERSION = @VERSION@ 226abs_builddir = @abs_builddir@ 227abs_srcdir = @abs_srcdir@ 228abs_top_builddir = @abs_top_builddir@ 229abs_top_srcdir = @abs_top_srcdir@ 230ac_ct_AR = @ac_ct_AR@ 231ac_ct_CC = @ac_ct_CC@ 232ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 233am__include = @am__include@ 234am__leading_dot = @am__leading_dot@ 235am__quote = @am__quote@ 236am__tar = @am__tar@ 237am__untar = @am__untar@ 238bindir = @bindir@ 239build = @build@ 240build_alias = @build_alias@ 241build_cpu = @build_cpu@ 242build_os = @build_os@ 243build_vendor = @build_vendor@ 244builddir = @builddir@ 245datadir = @datadir@ 246datarootdir = @datarootdir@ 247docdir = @docdir@ 248dvidir = @dvidir@ 249exec_prefix = @exec_prefix@ 250host = @host@ 251host_alias = @host_alias@ 252host_cpu = @host_cpu@ 253host_os = @host_os@ 254host_vendor = @host_vendor@ 255htmldir = @htmldir@ 256includedir = @includedir@ 257infodir = @infodir@ 258install_sh = @install_sh@ 259libdir = @libdir@ 260libexecdir = @libexecdir@ 261localedir = @localedir@ 262localstatedir = @localstatedir@ 263mandir = @mandir@ 264mkdir_p = @mkdir_p@ 265oldincludedir = @oldincludedir@ 266pdfdir = @pdfdir@ 267plugindir = @plugindir@ 268prefix = @prefix@ 269program_transform_name = @program_transform_name@ 270psdir = @psdir@ 271sampledir = @sampledir@ 272sbindir = @sbindir@ 273sharedstatedir = @sharedstatedir@ 274srcdir = @srcdir@ 275sysconfdir = @sysconfdir@ 276target_alias = @target_alias@ 277top_build_prefix = @top_build_prefix@ 278top_builddir = @top_builddir@ 279top_srcdir = @top_srcdir@ 280MAINTAINERCLEANFILES = \ 281 $(srcdir)/Makefile.in 282 283CLEANFILES = openvpn.8.html 284dist_doc_DATA = \ 285 management-notes.txt 286 287dist_noinst_DATA = README.plugins $(am__append_1) 288@WIN32_TRUE@nodist_html_DATA = openvpn.8.html 289@WIN32_FALSE@dist_man_MANS = openvpn.8 290all: all-am 291 292.SUFFIXES: 293$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 294 @for dep in $?; do \ 295 case '$(am__configure_deps)' in \ 296 *$$dep*) \ 297 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 298 && { if test -f $@; then exit 0; else break; fi; }; \ 299 exit 1;; \ 300 esac; \ 301 done; \ 302 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ 303 $(am__cd) $(top_srcdir) && \ 304 $(AUTOMAKE) --gnu doc/Makefile 305.PRECIOUS: Makefile 306Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 307 @case '$?' in \ 308 *config.status*) \ 309 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 310 *) \ 311 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 312 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 313 esac; 314 315$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 316 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 317 318$(top_srcdir)/configure: $(am__configure_deps) 319 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 320$(ACLOCAL_M4): $(am__aclocal_m4_deps) 321 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 322$(am__aclocal_m4_deps): 323 324mostlyclean-libtool: 325 -rm -f *.lo 326 327clean-libtool: 328 -rm -rf .libs _libs 329install-man8: $(dist_man_MANS) 330 @$(NORMAL_INSTALL) 331 @list1=''; \ 332 list2='$(dist_man_MANS)'; \ 333 test -n "$(man8dir)" \ 334 && test -n "`echo $$list1$$list2`" \ 335 || exit 0; \ 336 echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \ 337 $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \ 338 { for i in $$list1; do echo "$$i"; done; \ 339 if test -n "$$list2"; then \ 340 for i in $$list2; do echo "$$i"; done \ 341 | sed -n '/\.8[a-z]*$$/p'; \ 342 fi; \ 343 } | while read p; do \ 344 if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ 345 echo "$$d$$p"; echo "$$p"; \ 346 done | \ 347 sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ 348 -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ 349 sed 'N;N;s,\n, ,g' | { \ 350 list=; while read file base inst; do \ 351 if test "$$base" = "$$inst"; then list="$$list $$file"; else \ 352 echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ 353 $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \ 354 fi; \ 355 done; \ 356 for i in $$list; do echo "$$i"; done | $(am__base_list) | \ 357 while read files; do \ 358 test -z "$$files" || { \ 359 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \ 360 $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \ 361 done; } 362 363uninstall-man8: 364 @$(NORMAL_UNINSTALL) 365 @list=''; test -n "$(man8dir)" || exit 0; \ 366 files=`{ for i in $$list; do echo "$$i"; done; \ 367 l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ 368 sed -n '/\.8[a-z]*$$/p'; \ 369 } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ 370 -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ 371 dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir) 372install-dist_docDATA: $(dist_doc_DATA) 373 @$(NORMAL_INSTALL) 374 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ 375 if test -n "$$list"; then \ 376 echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ 377 $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ 378 fi; \ 379 for p in $$list; do \ 380 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 381 echo "$$d$$p"; \ 382 done | $(am__base_list) | \ 383 while read files; do \ 384 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ 385 $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ 386 done 387 388uninstall-dist_docDATA: 389 @$(NORMAL_UNINSTALL) 390 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ 391 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 392 dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) 393install-nodist_htmlDATA: $(nodist_html_DATA) 394 @$(NORMAL_INSTALL) 395 @list='$(nodist_html_DATA)'; test -n "$(htmldir)" || list=; \ 396 if test -n "$$list"; then \ 397 echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \ 398 $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \ 399 fi; \ 400 for p in $$list; do \ 401 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 402 echo "$$d$$p"; \ 403 done | $(am__base_list) | \ 404 while read files; do \ 405 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ 406 $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ 407 done 408 409uninstall-nodist_htmlDATA: 410 @$(NORMAL_UNINSTALL) 411 @list='$(nodist_html_DATA)'; test -n "$(htmldir)" || list=; \ 412 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 413 dir='$(DESTDIR)$(htmldir)'; $(am__uninstall_files_from_dir) 414tags: TAGS 415TAGS: 416 417ctags: CTAGS 418CTAGS: 419 420 421distdir: $(DISTFILES) 422 @list='$(MANS)'; if test -n "$$list"; then \ 423 list=`for p in $$list; do \ 424 if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ 425 if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ 426 if test -n "$$list" && \ 427 grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ 428 echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ 429 grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ 430 echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ 431 echo " typically \`make maintainer-clean' will remove them" >&2; \ 432 exit 1; \ 433 else :; fi; \ 434 else :; fi 435 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 436 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 437 list='$(DISTFILES)'; \ 438 dist_files=`for file in $$list; do echo $$file; done | \ 439 sed -e "s|^$$srcdirstrip/||;t" \ 440 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 441 case $$dist_files in \ 442 */*) $(MKDIR_P) `echo "$$dist_files" | \ 443 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 444 sort -u` ;; \ 445 esac; \ 446 for file in $$dist_files; do \ 447 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 448 if test -d $$d/$$file; then \ 449 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 450 if test -d "$(distdir)/$$file"; then \ 451 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 452 fi; \ 453 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 454 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 455 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 456 fi; \ 457 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 458 else \ 459 test -f "$(distdir)/$$file" \ 460 || cp -p $$d/$$file "$(distdir)/$$file" \ 461 || exit 1; \ 462 fi; \ 463 done 464check-am: all-am 465check: check-am 466all-am: Makefile $(MANS) $(DATA) 467installdirs: 468 for dir in "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(htmldir)"; do \ 469 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 470 done 471install: install-am 472install-exec: install-exec-am 473install-data: install-data-am 474uninstall: uninstall-am 475 476install-am: all-am 477 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 478 479installcheck: installcheck-am 480install-strip: 481 if test -z '$(STRIP)'; then \ 482 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 483 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 484 install; \ 485 else \ 486 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 487 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 488 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 489 fi 490mostlyclean-generic: 491 492clean-generic: 493 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) 494 495distclean-generic: 496 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 497 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 498 499maintainer-clean-generic: 500 @echo "This command is intended for maintainers to use" 501 @echo "it deletes files that may require special tools to rebuild." 502 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 503clean: clean-am 504 505clean-am: clean-generic clean-libtool mostlyclean-am 506 507distclean: distclean-am 508 -rm -f Makefile 509distclean-am: clean-am distclean-generic 510 511dvi: dvi-am 512 513dvi-am: 514 515html: html-am 516 517html-am: 518 519info: info-am 520 521info-am: 522 523install-data-am: install-dist_docDATA install-man \ 524 install-nodist_htmlDATA 525 526install-dvi: install-dvi-am 527 528install-dvi-am: 529 530install-exec-am: 531 532install-html: install-html-am 533 534install-html-am: 535 536install-info: install-info-am 537 538install-info-am: 539 540install-man: install-man8 541 542install-pdf: install-pdf-am 543 544install-pdf-am: 545 546install-ps: install-ps-am 547 548install-ps-am: 549 550installcheck-am: 551 552maintainer-clean: maintainer-clean-am 553 -rm -f Makefile 554maintainer-clean-am: distclean-am maintainer-clean-generic 555 556mostlyclean: mostlyclean-am 557 558mostlyclean-am: mostlyclean-generic mostlyclean-libtool 559 560pdf: pdf-am 561 562pdf-am: 563 564ps: ps-am 565 566ps-am: 567 568uninstall-am: uninstall-dist_docDATA uninstall-man \ 569 uninstall-nodist_htmlDATA 570 571uninstall-man: uninstall-man8 572 573.MAKE: install-am install-strip 574 575.PHONY: all all-am check check-am clean clean-generic clean-libtool \ 576 distclean distclean-generic distclean-libtool distdir dvi \ 577 dvi-am html html-am info info-am install install-am \ 578 install-data install-data-am install-dist_docDATA install-dvi \ 579 install-dvi-am install-exec install-exec-am install-html \ 580 install-html-am install-info install-info-am install-man \ 581 install-man8 install-nodist_htmlDATA install-pdf \ 582 install-pdf-am install-ps install-ps-am install-strip \ 583 installcheck installcheck-am installdirs maintainer-clean \ 584 maintainer-clean-generic mostlyclean mostlyclean-generic \ 585 mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ 586 uninstall-dist_docDATA uninstall-man uninstall-man8 \ 587 uninstall-nodist_htmlDATA 588 589@WIN32_TRUE@openvpn.8.html: $(srcdir)/openvpn.8 590@WIN32_TRUE@ $(MAN2HTML) < $(srcdir)/openvpn.8 > openvpn.8.html 591 592# Tell versions [3.59,3.63) of GNU make to not export all variables. 593# Otherwise a system limit (for SysV at least) may be exceeded. 594.NOEXPORT: 595