1/* 2 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting 3 * Copyright (c) 2002-2008 Atheros Communications, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 * 17 * $Id: ar5416_reset.c,v 1.6 2012/02/12 13:55:27 wiz Exp $ 18 */ 19#include "opt_ah.h" 20 21#include "ah.h" 22#include "ah_internal.h" 23#include "ah_devid.h" 24 25#include "ah_eeprom_v14.h" 26 27#include "ar5416/ar5416.h" 28#include "ar5416/ar5416reg.h" 29#include "ar5416/ar5416phy.h" 30 31/* Eeprom versioning macros. Returns true if the version is equal or newer than the ver specified */ 32#define EEP_MINOR(_ah) \ 33 (AH_PRIVATE(_ah)->ah_eeversion & AR5416_EEP_VER_MINOR_MASK) 34#define IS_EEP_MINOR_V2(_ah) (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_2) 35#define IS_EEP_MINOR_V3(_ah) (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_3) 36 37/* Additional Time delay to wait after activiting the Base band */ 38#define BASE_ACTIVATE_DELAY 100 /* 100 usec */ 39#define PLL_SETTLE_DELAY 300 /* 300 usec */ 40#define RTC_PLL_SETTLE_DELAY 1000 /* 1 ms */ 41 42static void ar5416InitDMA(struct ath_hal *ah); 43static void ar5416InitBB(struct ath_hal *ah, HAL_CHANNEL *chan); 44static void ar5416InitIMR(struct ath_hal *ah, HAL_OPMODE opmode); 45static void ar5416InitQoS(struct ath_hal *ah); 46static void ar5416InitUserSettings(struct ath_hal *ah); 47 48static HAL_BOOL _ar5416SetTransmitPower(struct ath_hal *ah, 49 HAL_CHANNEL_INTERNAL *chan, uint16_t *rfXpdGain); 50 51#if 0 52static HAL_BOOL ar5416ChannelChange(struct ath_hal *, HAL_CHANNEL *); 53#endif 54static void ar5416SetDeltaSlope(struct ath_hal *, HAL_CHANNEL_INTERNAL *); 55 56static HAL_BOOL ar5416SetResetPowerOn(struct ath_hal *ah); 57static HAL_BOOL ar5416SetReset(struct ath_hal *ah, int type); 58static void ar5416InitPLL(struct ath_hal *ah, HAL_CHANNEL *chan); 59static HAL_BOOL ar5416SetPowerPerRateTable(struct ath_hal *ah, 60 struct ar5416eeprom *pEepData, 61 HAL_CHANNEL_INTERNAL *chan, int16_t *ratesArray, 62 uint16_t cfgCtl, uint16_t AntennaReduction, 63 uint16_t twiceMaxRegulatoryPower, 64 uint16_t powerLimit); 65static HAL_BOOL ar5416SetPowerCalTable(struct ath_hal *ah, 66 struct ar5416eeprom *pEepData, 67 HAL_CHANNEL_INTERNAL *chan, 68 int16_t *pTxPowerIndexOffset); 69static uint16_t ar5416GetMaxEdgePower(uint16_t freq, 70 CAL_CTL_EDGES *pRdEdgesPower, HAL_BOOL is2GHz); 71 72static int16_t interpolate(uint16_t target, uint16_t srcLeft, 73 uint16_t srcRight, int16_t targetLeft, int16_t targetRight); 74static void ar5416Set11nRegs(struct ath_hal *ah, HAL_CHANNEL *chan); 75static void ar5416GetGainBoundariesAndPdadcs(struct ath_hal *ah, 76 HAL_CHANNEL_INTERNAL *chan, CAL_DATA_PER_FREQ *pRawDataSet, 77 uint8_t * bChans, uint16_t availPiers, 78 uint16_t tPdGainOverlap, int16_t *pMinCalPower, 79 uint16_t * pPdGainBoundaries, uint8_t * pPDADCValues, 80 uint16_t numXpdGains); 81static HAL_BOOL getLowerUpperIndex(uint8_t target, uint8_t *pList, 82 uint16_t listSize, uint16_t *indexL, uint16_t *indexR); 83static HAL_BOOL ar5416FillVpdTable(uint8_t pwrMin, uint8_t pwrMax, 84 uint8_t *pPwrList, uint8_t *pVpdList, 85 uint16_t numIntercepts, uint8_t *pRetVpdList); 86 87/* 88 * Places the device in and out of reset and then places sane 89 * values in the registers based on EEPROM config, initialization 90 * vectors (as determined by the mode), and station configuration 91 * 92 * bChannelChange is used to preserve DMA/PCU registers across 93 * a HW Reset during channel change. 94 */ 95HAL_BOOL 96ar5416Reset(struct ath_hal *ah, HAL_OPMODE opmode, 97 HAL_CHANNEL *chan, HAL_BOOL bChannelChange, HAL_STATUS *status) 98{ 99#define N(a) (sizeof (a) / sizeof (a[0])) 100#define FAIL(_code) do { ecode = _code; goto bad; } while (0) 101 struct ath_hal_5212 *ahp = AH5212(ah); 102 HAL_CHANNEL_INTERNAL *ichan; 103 uint32_t saveDefAntenna, saveLedState; 104 uint32_t macStaId1; 105 uint16_t rfXpdGain[2]; 106 HAL_STATUS ecode; 107 uint32_t powerVal, rssiThrReg; 108 uint32_t ackTpcPow, ctsTpcPow, chirpTpcPow; 109 int i; 110 111 OS_MARK(ah, AH_MARK_RESET, bChannelChange); 112#define IS(_c,_f) (((_c)->channelFlags & _f) || 0) 113 if ((IS(chan, CHANNEL_2GHZ) ^ IS(chan, CHANNEL_5GHZ)) == 0) { 114 HALDEBUG(ah, HAL_DEBUG_ANY, 115 "%s: invalid channel %u/0x%x; not marked as 2GHz or 5GHz\n", 116 __func__, chan->channel, chan->channelFlags); 117 FAIL(HAL_EINVAL); 118 } 119 if ((IS(chan, CHANNEL_OFDM) ^ IS(chan, CHANNEL_CCK)) == 0) { 120 HALDEBUG(ah, HAL_DEBUG_ANY, 121 "%s: invalid channel %u/0x%x; not marked as OFDM or CCK\n", 122 __func__, chan->channel, chan->channelFlags); 123 FAIL(HAL_EINVAL); 124 } 125#undef IS 126 127 /* Bring out of sleep mode */ 128 if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) { 129 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip did not wakeup\n", 130 __func__); 131 FAIL(HAL_EIO); 132 } 133 134 /* 135 * Map public channel to private. 136 */ 137 ichan = ath_hal_checkchannel(ah, chan); 138 if (ichan == AH_NULL) { 139 HALDEBUG(ah, HAL_DEBUG_ANY, 140 "%s: invalid channel %u/0x%x; no mapping\n", 141 __func__, chan->channel, chan->channelFlags); 142 FAIL(HAL_EINVAL); 143 } else { 144 HALDEBUG(ah, HAL_DEBUG_RESET, 145 "%s: Ch=%u Max=%d Min=%d\n",__func__, 146 ichan->channel, ichan->maxTxPower, ichan->minTxPower); 147 } 148 switch (opmode) { 149 case HAL_M_STA: 150 case HAL_M_IBSS: 151 case HAL_M_HOSTAP: 152 case HAL_M_MONITOR: 153 break; 154 default: 155 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid operating mode %u\n", 156 __func__, opmode); 157 FAIL(HAL_EINVAL); 158 break; 159 } 160 HALASSERT(AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER14_1); 161 162 /* XXX Turn on fast channel change for 5416 */ 163 /* 164 * Preserve the bmiss rssi threshold and count threshold 165 * across resets 166 */ 167 rssiThrReg = OS_REG_READ(ah, AR_RSSI_THR); 168 /* If reg is zero, first time thru set to default val */ 169 if (rssiThrReg == 0) 170 rssiThrReg = INIT_RSSI_THR; 171 172 /* 173 * Preserve the antenna on a channel change 174 */ 175 saveDefAntenna = OS_REG_READ(ah, AR_DEF_ANTENNA); 176 if (saveDefAntenna == 0) /* XXX magic constants */ 177 saveDefAntenna = 1; 178 179 /* Save hardware flag before chip reset clears the register */ 180 macStaId1 = OS_REG_READ(ah, AR_STA_ID1) & 181 (AR_STA_ID1_BASE_RATE_11B | AR_STA_ID1_USE_DEFANT); 182 183 /* Save led state from pci config register */ 184 saveLedState = OS_REG_READ(ah, AR_MAC_LED) & 185 (AR_MAC_LED_ASSOC | AR_MAC_LED_MODE | 186 AR_MAC_LED_BLINK_THRESH_SEL | AR_MAC_LED_BLINK_SLOW); 187 188 if (!ar5416ChipReset(ah, chan)) { 189 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__); 190 FAIL(HAL_EIO); 191 } 192 193 /* Restore bmiss rssi & count thresholds */ 194 OS_REG_WRITE(ah, AR_RSSI_THR, rssiThrReg); 195 196 OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); 197 if (AR_SREV_MERLIN_10_OR_LATER(ah)) 198 OS_REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE); 199 200 if (AR_SREV_KITE(ah)) { 201 uint32_t val; 202 val = OS_REG_READ(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS); 203 val &= ~AR_PHY_RIFS_INIT_DELAY; 204 OS_REG_WRITE(ah, AR_PHY_HEAVY_CLIP_FACTOR_RIFS, val); 205 } 206 207 AH5416(ah)->ah_writeIni(ah, (HAL_CHANNEL_INTERNAL *)chan); 208 209 /* Setup 11n MAC/Phy mode registers */ 210 ar5416Set11nRegs(ah, chan); 211 212 OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); 213 214 HALDEBUG(ah, HAL_DEBUG_RESET, ">>>2 %s: AR_PHY_DAG_CTRLCCK=0x%x\n", 215 __func__, OS_REG_READ(ah,AR_PHY_DAG_CTRLCCK)); 216 HALDEBUG(ah, HAL_DEBUG_RESET, ">>>2 %s: AR_PHY_ADC_CTL=0x%x\n", 217 __func__, OS_REG_READ(ah,AR_PHY_ADC_CTL)); 218 219 /* Set the mute mask to the correct default */ 220 if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_2) 221 OS_REG_WRITE(ah, AR_SEQ_MASK, 0x0000000F); 222 223 if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_3) { 224 /* Clear reg to alllow RX_CLEAR line debug */ 225 OS_REG_WRITE(ah, AR_PHY_BLUETOOTH, 0); 226 } 227 if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_4) { 228#ifdef notyet 229 /* Enable burst prefetch for the data queues */ 230 OS_REG_RMW_FIELD(ah, AR_D_FPCTL, ... ); 231 /* Enable double-buffering */ 232 OS_REG_CLR_BIT(ah, AR_TXCFG, AR_TXCFG_DBL_BUF_DIS); 233#endif 234 } 235 236 /* Set ADC/DAC select values */ 237 OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0e); 238 239 if (AH5416(ah)->ah_rx_chainmask == 0x5 || 240 AH5416(ah)->ah_tx_chainmask == 0x5) 241 OS_REG_WRITE(ah, AR_PHY_ANALOG_SWAP, AR_PHY_SWAP_ALT_CHAIN); 242 /* Setup Chain Masks */ 243 OS_REG_WRITE(ah, AR_PHY_RX_CHAINMASK, AH5416(ah)->ah_rx_chainmask); 244 OS_REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, AH5416(ah)->ah_rx_chainmask); 245 OS_REG_WRITE(ah, AR_SELFGEN_MASK, AH5416(ah)->ah_tx_chainmask); 246 247 /* Setup the transmit power values. */ 248 if (!ah->ah_setTxPower(ah, chan, rfXpdGain)) { 249 HALDEBUG(ah, HAL_DEBUG_ANY, 250 "%s: error init'ing transmit power\n", __func__); 251 FAIL(HAL_EIO); 252 } 253 254 /* Write the analog registers */ 255 if (!ahp->ah_rfHal->setRfRegs(ah, ichan, 256 IS_CHAN_2GHZ(chan) ? 2 : 1, rfXpdGain)) { 257 HALDEBUG(ah, HAL_DEBUG_ANY, 258 "%s: ar5212SetRfRegs failed\n", __func__); 259 FAIL(HAL_EIO); 260 } 261 262 /* Write delta slope for OFDM enabled modes (A, G, Turbo) */ 263 if (IS_CHAN_OFDM(chan)|| IS_CHAN_HT(chan)) 264 ar5416SetDeltaSlope(ah, ichan); 265 266 AH5416(ah)->ah_spurMitigate(ah, (HAL_CHANNEL_INTERNAL *)chan); 267 268 /* Setup board specific options for EEPROM version 3 */ 269 if (!ah->ah_setBoardValues(ah, chan)) { 270 HALDEBUG(ah, HAL_DEBUG_ANY, 271 "%s: error setting board options\n", __func__); 272 FAIL(HAL_EIO); 273 } 274 275 OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); 276 277 OS_REG_WRITE(ah, AR_STA_ID0, LE_READ_4(ahp->ah_macaddr)); 278 OS_REG_WRITE(ah, AR_STA_ID1, LE_READ_2(ahp->ah_macaddr + 4) 279 | macStaId1 280 | AR_STA_ID1_RTS_USE_DEF 281 | ahp->ah_staId1Defaults 282 ); 283 ar5212SetOperatingMode(ah, opmode); 284 285 /* Set Venice BSSID mask according to current state */ 286 OS_REG_WRITE(ah, AR_BSSMSKL, LE_READ_4(ahp->ah_bssidmask)); 287 OS_REG_WRITE(ah, AR_BSSMSKU, LE_READ_2(ahp->ah_bssidmask + 4)); 288 289 /* Restore previous led state */ 290 OS_REG_WRITE(ah, AR_MAC_LED, OS_REG_READ(ah, AR_MAC_LED) | saveLedState); 291 /* Restore previous antenna */ 292 OS_REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna); 293 294 /* then our BSSID */ 295 OS_REG_WRITE(ah, AR_BSS_ID0, LE_READ_4(ahp->ah_bssid)); 296 OS_REG_WRITE(ah, AR_BSS_ID1, LE_READ_2(ahp->ah_bssid + 4)); 297 298 /* Restore bmiss rssi & count thresholds */ 299 OS_REG_WRITE(ah, AR_RSSI_THR, ahp->ah_rssiThr); 300 301 OS_REG_WRITE(ah, AR_ISR, ~0); /* cleared on write */ 302 303 if (!ar5212SetChannel(ah, ichan)) 304 FAIL(HAL_EIO); 305 306 OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__); 307 308 /* Set 1:1 QCU to DCU mapping for all queues */ 309 for (i = 0; i < AR_NUM_DCU; i++) 310 OS_REG_WRITE(ah, AR_DQCUMASK(i), 1 << i); 311 312 ahp->ah_intrTxqs = 0; 313 for (i = 0; i < AH_PRIVATE(ah)->ah_caps.halTotalQueues; i++) 314 ar5212ResetTxQueue(ah, i); 315 316 ar5416InitIMR(ah, opmode); 317 ar5212SetCoverageClass(ah, AH_PRIVATE(ah)->ah_coverageClass, 1); 318 ar5416InitQoS(ah); 319 ar5416InitUserSettings(ah); 320 321 /* 322 * disable seq number generation in hw 323 */ 324 OS_REG_WRITE(ah, AR_STA_ID1, 325 OS_REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PRESERVE_SEQNUM); 326 327 ar5416InitDMA(ah); 328 329 /* 330 * program OBS bus to see MAC interrupts 331 */ 332 OS_REG_WRITE(ah, AR_OBS, 8); 333 334#ifdef AR5416_INT_MITIGATION 335 OS_REG_WRITE(ah, AR_MIRT, 0); 336 OS_REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, 500); 337 OS_REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, 2000); 338#endif 339 340 ar5416InitBB(ah, chan); 341 342 /* Setup compression registers */ 343 ar5212SetCompRegs(ah); /* XXX not needed? */ 344 345 /* 346 * 5416 baseband will check the per rate power table 347 * and select the lower of the two 348 */ 349 ackTpcPow = 63; 350 ctsTpcPow = 63; 351 chirpTpcPow = 63; 352 powerVal = SM(ackTpcPow, AR_TPC_ACK) | 353 SM(ctsTpcPow, AR_TPC_CTS) | 354 SM(chirpTpcPow, AR_TPC_CHIRP); 355 OS_REG_WRITE(ah, AR_TPC, powerVal); 356 357 if (!ar5416InitCal(ah, chan)) 358 FAIL(HAL_ESELFTEST); 359 360 AH_PRIVATE(ah)->ah_opmode = opmode; /* record operating mode */ 361 362 if (bChannelChange) { 363 if (!(ichan->privFlags & CHANNEL_DFS)) 364 ichan->privFlags &= ~CHANNEL_INTERFERENCE; 365 chan->channelFlags = ichan->channelFlags; 366 chan->privFlags = ichan->privFlags; 367 chan->maxRegTxPower = ichan->maxRegTxPower; 368 chan->maxTxPower = ichan->maxTxPower; 369 chan->minTxPower = ichan->minTxPower; 370 } 371 372 HALDEBUG(ah, HAL_DEBUG_RESET, "%s: done\n", __func__); 373 374 OS_MARK(ah, AH_MARK_RESET_DONE, 0); 375 376 return AH_TRUE; 377bad: 378 OS_MARK(ah, AH_MARK_RESET_DONE, ecode); 379 if (status != AH_NULL) 380 *status = ecode; 381 return AH_FALSE; 382#undef FAIL 383#undef N 384} 385 386#if 0 387/* 388 * This channel change evaluates whether the selected hardware can 389 * perform a synthesizer-only channel change (no reset). If the 390 * TX is not stopped, or the RFBus cannot be granted in the given 391 * time, the function returns false as a reset is necessary 392 */ 393HAL_BOOL 394ar5416ChannelChange(struct ath_hal *ah, HAL_CHANNEL *chan) 395{ 396 uint32_t ulCount; 397 uint32_t data, synthDelay, qnum; 398 uint16_t rfXpdGain[4]; 399 struct ath_hal_5212 *ahp = AH5212(ah); 400 HAL_CHANNEL_INTERNAL *ichan; 401 402 /* 403 * Map public channel to private. 404 */ 405 ichan = ath_hal_checkchannel(ah, chan); 406 407 /* TX must be stopped or RF Bus grant will not work */ 408 for (qnum = 0; qnum < AH_PRIVATE(ah)->ah_caps.halTotalQueues; qnum++) { 409 if (ar5212NumTxPending(ah, qnum)) { 410 HALDEBUG(ah, HAL_DEBUG_ANY, 411 "%s: frames pending on queue %d\n", __func__, qnum); 412 return AH_FALSE; 413 } 414 } 415 416 /* 417 * Kill last Baseband Rx Frame - Request analog bus grant 418 */ 419 OS_REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_REQUEST); 420 if (!ath_hal_wait(ah, AR_PHY_RFBUS_GNT, AR_PHY_RFBUS_GRANT_EN, AR_PHY_RFBUS_GRANT_EN)) { 421 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: could not kill baseband rx\n", 422 __func__); 423 return AH_FALSE; 424 } 425 426 ar5416Set11nRegs(ah, chan); /* NB: setup 5416-specific regs */ 427 428 /* Change the synth */ 429 if (!ar5212SetChannel(ah, ichan)) 430 return AH_FALSE; 431 432 /* Setup the transmit power values. */ 433 if (!_ar5416SetTransmitPower(ah, ichan, rfXpdGain)) { 434 HALDEBUG(ah, HAL_DEBUG_ANY, 435 "%s: error init'ing transmit power\n", __func__); 436 return AH_FALSE; 437 } 438 439 /* 440 * Wait for the frequency synth to settle (synth goes on 441 * via PHY_ACTIVE_EN). Read the phy active delay register. 442 * Value is in 100ns increments. 443 */ 444 data = OS_REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; 445 if (IS_CHAN_CCK(ichan)) { 446 synthDelay = (4 * data) / 22; 447 } else { 448 synthDelay = data / 10; 449 } 450 451 OS_DELAY(synthDelay + BASE_ACTIVATE_DELAY); 452 453 /* Release the RFBus Grant */ 454 OS_REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0); 455 456 /* Write delta slope for OFDM enabled modes (A, G, Turbo) */ 457 if (IS_CHAN_OFDM(ichan)|| IS_CHAN_HT(chan)) { 458 if (ahp->ah_eeprom.ee_version >= AR_EEPROM_VER5_3 && 459 !IS_CHAN_B(chan)) 460 ar5212SetSpurMitigation(ah, ichan); 461 ar5416SetDeltaSlope(ah, ichan); 462 } 463 464 /* XXX spur mitigation for Melin */ 465 466 /* Copy over internal channel flags to public hal channel */ 467 468 if (!(ichan->privFlags & CHANNEL_DFS)) 469 ichan->privFlags &= ~CHANNEL_INTERFERENCE; 470 chan->channelFlags = ichan->channelFlags; 471 chan->privFlags = ichan->privFlags; 472 chan->maxRegTxPower = ichan->maxRegTxPower; 473 chan->maxTxPower = ichan->maxTxPower; 474 chan->minTxPower = ichan->minTxPower; 475 AH_PRIVATE(ah)->ah_curchan->ah_channel_time=0; 476 AH_PRIVATE(ah)->ah_curchan->ah_tsf_last = ar5212GetTsf64(ah); 477 ar5212TxEnable(ah,AH_TRUE); 478 return AH_TRUE; 479} 480#endif 481 482static void 483ar5416InitDMA(struct ath_hal *ah) 484{ 485 struct ath_hal_5212 *ahp = AH5212(ah); 486 487 /* 488 * set AHB_MODE not to do cacheline prefetches 489 */ 490 OS_REG_SET_BIT(ah, AR_AHB_MODE, AR_AHB_PREFETCH_RD_EN); 491 492 /* 493 * let mac dma reads be in 128 byte chunks 494 */ 495 OS_REG_WRITE(ah, AR_TXCFG, 496 (OS_REG_READ(ah, AR_TXCFG) & ~AR_TXCFG_DMASZ_MASK) | AR_TXCFG_DMASZ_128B); 497 498 /* 499 * let mac dma writes be in 128 byte chunks 500 */ 501 OS_REG_WRITE(ah, AR_RXCFG, 502 (OS_REG_READ(ah, AR_RXCFG) & ~AR_RXCFG_DMASZ_MASK) | AR_RXCFG_DMASZ_128B); 503 504 /* 505 * restore TX trigger level 506 */ 507 OS_REG_WRITE(ah, AR_TXCFG, 508 (OS_REG_READ(ah, AR_TXCFG) &~ AR_FTRIG) | 509 SM(ahp->ah_txTrigLev, AR_FTRIG)); 510 511 /* 512 * Setup receive FIFO threshold to hold off TX activities 513 */ 514 OS_REG_WRITE(ah, AR_RXFIFO_CFG, 0x200); 515 516 /* 517 * reduce the number of usable entries in PCU TXBUF to avoid 518 * wrap around. 519 */ 520 OS_REG_WRITE(ah, AR_PCU_TXBUF_CTRL, AR_PCU_TXBUF_CTRL_USABLE_SIZE); 521} 522 523static void 524ar5416InitBB(struct ath_hal *ah, HAL_CHANNEL *chan) 525{ 526 uint32_t synthDelay; 527 528 /* 529 * Wait for the frequency synth to settle (synth goes on 530 * via AR_PHY_ACTIVE_EN). Read the phy active delay register. 531 * Value is in 100ns increments. 532 */ 533 synthDelay = OS_REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; 534 if (IS_CHAN_CCK(chan)) { 535 synthDelay = (4 * synthDelay) / 22; 536 } else { 537 synthDelay /= 10; 538 } 539 540 /* Turn on PLL on 5416 */ 541 HALDEBUG(ah, HAL_DEBUG_RESET, "%s %s channel\n", 542 __func__, IS_CHAN_5GHZ(chan) ? "5GHz" : "2GHz"); 543 ar5416InitPLL(ah, chan); 544 545 /* Activate the PHY (includes baseband activate and synthesizer on) */ 546 OS_REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); 547 548 /* 549 * If the AP starts the calibration before the base band timeout 550 * completes we could get rx_clear false triggering. Add an 551 * extra BASE_ACTIVATE_DELAY usecs to ensure this condition 552 * does not happen. 553 */ 554 if (IS_CHAN_HALF_RATE(AH_PRIVATE(ah)->ah_curchan)) { 555 OS_DELAY((synthDelay << 1) + BASE_ACTIVATE_DELAY); 556 } else if (IS_CHAN_QUARTER_RATE(AH_PRIVATE(ah)->ah_curchan)) { 557 OS_DELAY((synthDelay << 2) + BASE_ACTIVATE_DELAY); 558 } else { 559 OS_DELAY(synthDelay + BASE_ACTIVATE_DELAY); 560 } 561} 562 563static void 564ar5416InitIMR(struct ath_hal *ah, HAL_OPMODE opmode) 565{ 566 struct ath_hal_5212 *ahp = AH5212(ah); 567 568 /* 569 * Setup interrupt handling. Note that ar5212ResetTxQueue 570 * manipulates the secondary IMR's as queues are enabled 571 * and disabled. This is done with RMW ops to insure the 572 * settings we make here are preserved. 573 */ 574 ahp->ah_maskReg = AR_IMR_TXERR | AR_IMR_TXURN 575 | AR_IMR_RXERR | AR_IMR_RXORN 576 | AR_IMR_BCNMISC; 577 578#ifdef AR5416_INT_MITIGATION 579 ahp->ah_maskReg |= AR_IMR_TXINTM | AR_IMR_RXINTM 580 | AR_IMR_TXMINTR | AR_IMR_RXMINTR; 581#else 582 ahp->ah_maskReg |= AR_IMR_TXOK | AR_IMR_RXOK; 583#endif 584 if (opmode == HAL_M_HOSTAP) 585 ahp->ah_maskReg |= AR_IMR_MIB; 586 OS_REG_WRITE(ah, AR_IMR, ahp->ah_maskReg); 587 /* Enable bus errors that are OR'd to set the HIUERR bit */ 588 589#if 0 590 OS_REG_WRITE(ah, AR_IMR_S2, 591 OS_REG_READ(ah, AR_IMR_S2) | AR_IMR_S2_GTT | AR_IMR_S2_CST); 592#endif 593} 594 595static void 596ar5416InitQoS(struct ath_hal *ah) 597{ 598 /* QoS support */ 599 OS_REG_WRITE(ah, AR_QOS_CONTROL, 0x100aa); /* XXX magic */ 600 OS_REG_WRITE(ah, AR_QOS_SELECT, 0x3210); /* XXX magic */ 601 602 /* Turn on NOACK Support for QoS packets */ 603 OS_REG_WRITE(ah, AR_NOACK, 604 SM(2, AR_NOACK_2BIT_VALUE) | 605 SM(5, AR_NOACK_BIT_OFFSET) | 606 SM(0, AR_NOACK_BYTE_OFFSET)); 607 608 /* 609 * initialize TXOP for all TIDs 610 */ 611 OS_REG_WRITE(ah, AR_TXOP_X, AR_TXOP_X_VAL); 612 OS_REG_WRITE(ah, AR_TXOP_0_3, 0xFFFFFFFF); 613 OS_REG_WRITE(ah, AR_TXOP_4_7, 0xFFFFFFFF); 614 OS_REG_WRITE(ah, AR_TXOP_8_11, 0xFFFFFFFF); 615 OS_REG_WRITE(ah, AR_TXOP_12_15, 0xFFFFFFFF); 616} 617 618static void 619ar5416InitUserSettings(struct ath_hal *ah) 620{ 621 struct ath_hal_5212 *ahp = AH5212(ah); 622 623 /* Restore user-specified settings */ 624 if (ahp->ah_miscMode != 0) 625 OS_REG_WRITE(ah, AR_MISC_MODE, ahp->ah_miscMode); 626 if (ahp->ah_sifstime != (u_int) -1) 627 ar5212SetSifsTime(ah, ahp->ah_sifstime); 628 if (ahp->ah_slottime != (u_int) -1) 629 ar5212SetSlotTime(ah, ahp->ah_slottime); 630 if (ahp->ah_acktimeout != (u_int) -1) 631 ar5212SetAckTimeout(ah, ahp->ah_acktimeout); 632 if (ahp->ah_ctstimeout != (u_int) -1) 633 ar5212SetCTSTimeout(ah, ahp->ah_ctstimeout); 634 if (AH_PRIVATE(ah)->ah_diagreg != 0) 635 OS_REG_WRITE(ah, AR_DIAG_SW, AH_PRIVATE(ah)->ah_diagreg); 636#if 0 /* XXX Todo */ 637 if (ahp->ah_globaltxtimeout != (u_int) -1) 638 ar5416SetGlobalTxTimeout(ah, ahp->ah_globaltxtimeout); 639#endif 640} 641 642/* 643 * Places the hardware into reset and then pulls it out of reset 644 */ 645HAL_BOOL 646ar5416ChipReset(struct ath_hal *ah, HAL_CHANNEL *chan) 647{ 648 OS_MARK(ah, AH_MARK_CHIPRESET, chan ? chan->channel : 0); 649 /* 650 * Warm reset is optimistic. 651 */ 652 if (AR_SREV_MERLIN_20_OR_LATER(ah) && 653 ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) { 654 if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) 655 return AH_FALSE; 656 } else { 657 if (!ar5416SetResetReg(ah, HAL_RESET_WARM)) 658 return AH_FALSE; 659 } 660 661 /* Bring out of sleep mode (AGAIN) */ 662 if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) 663 return AH_FALSE; 664 665 ar5416InitPLL(ah, chan); 666 667 /* 668 * Perform warm reset before the mode/PLL/turbo registers 669 * are changed in order to deactivate the radio. Mode changes 670 * with an active radio can result in corrupted shifts to the 671 * radio device. 672 */ 673 if (chan != AH_NULL) { 674 uint32_t rfMode; 675 676 /* treat channel B as channel G , no B mode suport in owl */ 677 rfMode = (IS_CHAN_G(chan) || IS_CHAN_B(chan)) ? 678 AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM; 679 if (AR_SREV_MERLIN_20(ah) && IS_5GHZ_FAST_CLOCK_EN(ah, chan)) { 680 /* phy mode bits for 5GHz channels require Fast Clock */ 681 rfMode |= AR_PHY_MODE_DYNAMIC 682 | AR_PHY_MODE_DYN_CCK_DISABLE; 683 } else if (!AR_SREV_MERLIN_10_OR_LATER(ah)) { 684 rfMode |= (IS_CHAN_5GHZ(chan)) ? 685 AR_PHY_MODE_RF5GHZ : AR_PHY_MODE_RF2GHZ; 686 } 687 OS_REG_WRITE(ah, AR_PHY_MODE, rfMode); 688 } 689 return AH_TRUE; 690} 691 692/* 693 * Delta slope coefficient computation. 694 * Required for OFDM operation. 695 */ 696static void 697ar5416GetDeltaSlopeValues(struct ath_hal *ah, uint32_t coef_scaled, 698 uint32_t *coef_mantissa, uint32_t *coef_exponent) 699{ 700#define COEF_SCALE_S 24 701 uint32_t coef_exp, coef_man; 702 /* 703 * ALGO -> coef_exp = 14-floor(log2(coef)); 704 * floor(log2(x)) is the highest set bit position 705 */ 706 for (coef_exp = 31; coef_exp > 0; coef_exp--) 707 if ((coef_scaled >> coef_exp) & 0x1) 708 break; 709 /* A coef_exp of 0 is a legal bit position but an unexpected coef_exp */ 710 HALASSERT(coef_exp); 711 coef_exp = 14 - (coef_exp - COEF_SCALE_S); 712 713 /* 714 * ALGO -> coef_man = floor(coef* 2^coef_exp+0.5); 715 * The coefficient is already shifted up for scaling 716 */ 717 coef_man = coef_scaled + (1 << (COEF_SCALE_S - coef_exp - 1)); 718 719 *coef_mantissa = coef_man >> (COEF_SCALE_S - coef_exp); 720 *coef_exponent = coef_exp - 16; 721 722#undef COEF_SCALE_S 723} 724 725void 726ar5416SetDeltaSlope(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan) 727{ 728#define INIT_CLOCKMHZSCALED 0x64000000 729 uint32_t coef_scaled, ds_coef_exp, ds_coef_man; 730 uint32_t clockMhzScaled = INIT_CLOCKMHZSCALED; 731 732 CHAN_CENTERS centers; 733 734 if (IS_CHAN_TURBO(chan)) 735 clockMhzScaled *= 2; 736 /* half and quarter rate can divide the scaled clock by 2 or 4 respectively */ 737 /* scale for selected channel bandwidth */ 738 if (IS_CHAN_HALF_RATE(chan)) { 739 clockMhzScaled = clockMhzScaled >> 1; 740 } else if (IS_CHAN_QUARTER_RATE(chan)) { 741 clockMhzScaled = clockMhzScaled >> 2; 742 } 743 744 /* 745 * ALGO -> coef = 1e8/fcarrier*fclock/40; 746 * scaled coef to provide precision for this floating calculation 747 */ 748 ar5416GetChannelCenters(ah, chan, ¢ers); 749 coef_scaled = clockMhzScaled / centers.synth_center; 750 751 ar5416GetDeltaSlopeValues(ah, coef_scaled, &ds_coef_man, &ds_coef_exp); 752 753 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING3, 754 AR_PHY_TIMING3_DSC_MAN, ds_coef_man); 755 OS_REG_RMW_FIELD(ah, AR_PHY_TIMING3, 756 AR_PHY_TIMING3_DSC_EXP, ds_coef_exp); 757 758 /* 759 * For Short GI, 760 * scaled coeff is 9/10 that of normal coeff 761 */ 762 coef_scaled = (9 * coef_scaled)/10; 763 764 ar5416GetDeltaSlopeValues(ah, coef_scaled, &ds_coef_man, &ds_coef_exp); 765 766 /* for short gi */ 767 OS_REG_RMW_FIELD(ah, AR_PHY_HALFGI, 768 AR_PHY_HALFGI_DSC_MAN, ds_coef_man); 769 OS_REG_RMW_FIELD(ah, AR_PHY_HALFGI, 770 AR_PHY_HALFGI_DSC_EXP, ds_coef_exp); 771#undef INIT_CLOCKMHZSCALED 772} 773 774/* 775 * Set a limit on the overall output power. Used for dynamic 776 * transmit power control and the like. 777 * 778 * NB: limit is in units of 0.5 dbM. 779 */ 780HAL_BOOL 781ar5416SetTxPowerLimit(struct ath_hal *ah, uint32_t limit) 782{ 783 uint16_t dummyXpdGains[2]; 784 785 AH_PRIVATE(ah)->ah_powerLimit = AH_MIN(limit, MAX_RATE_POWER); 786 return _ar5416SetTransmitPower(ah, AH_PRIVATE(ah)->ah_curchan, 787 dummyXpdGains); 788} 789 790HAL_BOOL 791ar5416GetChipPowerLimits(struct ath_hal *ah, HAL_CHANNEL *chans, uint32_t nchans) 792{ 793 struct ath_hal_5212 *ahp = AH5212(ah); 794 int16_t minPower, maxPower; 795 HAL_CHANNEL *chan; 796 int i; 797 798 /* 799 * Get Pier table max and min powers. 800 */ 801 for (i = 0; i < nchans; i++) { 802 chan = &chans[i]; 803 if (ahp->ah_rfHal->getChannelMaxMinPower(ah, chan, &maxPower, &minPower)) { 804 /* NB: rf code returns 1/4 dBm units, convert */ 805 chan->maxTxPower = maxPower / 2; 806 chan->minTxPower = minPower / 2; 807 } else { 808 HALDEBUG(ah, HAL_DEBUG_ANY, 809 "%s: no min/max power for %u/0x%x\n", 810 __func__, chan->channel, chan->channelFlags); 811 chan->maxTxPower = AR5416_MAX_RATE_POWER; 812 chan->minTxPower = 0; 813 } 814 } 815#ifdef AH_DEBUG 816 for (i=0; i<nchans; i++) { 817 HALDEBUG(ah, HAL_DEBUG_RESET, 818 "Chan %d: MaxPow = %d MinPow = %d\n", 819 chans[i].channel,chans[i].maxTxPower, chans[i].minTxPower); 820 } 821#endif 822 return AH_TRUE; 823} 824 825/* XXX gag, this is sick */ 826typedef enum Ar5416_Rates { 827 rate6mb, rate9mb, rate12mb, rate18mb, 828 rate24mb, rate36mb, rate48mb, rate54mb, 829 rate1l, rate2l, rate2s, rate5_5l, 830 rate5_5s, rate11l, rate11s, rateXr, 831 rateHt20_0, rateHt20_1, rateHt20_2, rateHt20_3, 832 rateHt20_4, rateHt20_5, rateHt20_6, rateHt20_7, 833 rateHt40_0, rateHt40_1, rateHt40_2, rateHt40_3, 834 rateHt40_4, rateHt40_5, rateHt40_6, rateHt40_7, 835 rateDupCck, rateDupOfdm, rateExtCck, rateExtOfdm, 836 Ar5416RateSize 837} AR5416_RATES; 838 839/************************************************************** 840 * ar5416SetTransmitPower 841 * 842 * Set the transmit power in the baseband for the given 843 * operating channel and mode. 844 */ 845static HAL_BOOL 846_ar5416SetTransmitPower(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, uint16_t *rfXpdGain) 847{ 848#define POW_SM(_r, _s) (((_r) & 0x3f) << (_s)) 849#define N(a) (sizeof (a) / sizeof (a[0])) 850 851 MODAL_EEP_HEADER *pModal; 852 struct ath_hal_5212 *ahp = AH5212(ah); 853 int16_t ratesArray[Ar5416RateSize]; 854 int16_t txPowerIndexOffset = 0; 855 uint8_t ht40PowerIncForPdadc = 2; 856 int i; 857 858 uint16_t cfgCtl; 859 uint16_t powerLimit; 860 uint16_t twiceAntennaReduction; 861 uint16_t twiceMaxRegulatoryPower; 862 int16_t maxPower; 863 HAL_EEPROM_v14 *ee = AH_PRIVATE(ah)->ah_eeprom; 864 struct ar5416eeprom *pEepData = &ee->ee_base; 865 866 HALASSERT(AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER14_1); 867 868 /* Setup info for the actual eeprom */ 869 ath_hal_memzero(ratesArray, sizeof(ratesArray)); 870 cfgCtl = ath_hal_getctl(ah, (HAL_CHANNEL *)chan); 871 powerLimit = chan->maxRegTxPower * 2; 872 twiceAntennaReduction = chan->antennaMax; 873 twiceMaxRegulatoryPower = AH_MIN(MAX_RATE_POWER, AH_PRIVATE(ah)->ah_powerLimit); 874 pModal = &pEepData->modalHeader[IS_CHAN_2GHZ(chan)]; 875 HALDEBUG(ah, HAL_DEBUG_RESET, "%s Channel=%u CfgCtl=%u\n", 876 __func__,chan->channel, cfgCtl ); 877 878 if (IS_EEP_MINOR_V2(ah)) { 879 ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc; 880 } 881 882 if (!ar5416SetPowerPerRateTable(ah, pEepData, chan, 883 &ratesArray[0],cfgCtl, 884 twiceAntennaReduction, 885 twiceMaxRegulatoryPower, powerLimit)) { 886 HALDEBUG(ah, HAL_DEBUG_ANY, 887 "%s: unable to set tx power per rate table\n", __func__); 888 return AH_FALSE; 889 } 890 891 if (!ar5416SetPowerCalTable(ah, pEepData, chan, &txPowerIndexOffset)) { 892 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unable to set power table\n", 893 __func__); 894 return AH_FALSE; 895 } 896 897 maxPower = AH_MAX(ratesArray[rate6mb], ratesArray[rateHt20_0]); 898 899 if (IS_CHAN_2GHZ(chan)) { 900 maxPower = AH_MAX(maxPower, ratesArray[rate1l]); 901 } 902 903 if (IS_CHAN_HT40(chan)) { 904 maxPower = AH_MAX(maxPower, ratesArray[rateHt40_0]); 905 } 906 907 ahp->ah_tx6PowerInHalfDbm = maxPower; 908 AH_PRIVATE(ah)->ah_maxPowerLevel = maxPower; 909 ahp->ah_txPowerIndexOffset = txPowerIndexOffset; 910 911 /* 912 * txPowerIndexOffset is set by the SetPowerTable() call - 913 * adjust the rate table (0 offset if rates EEPROM not loaded) 914 */ 915 for (i = 0; i < N(ratesArray); i++) { 916 ratesArray[i] = (int16_t)(txPowerIndexOffset + ratesArray[i]); 917 if (ratesArray[i] > AR5416_MAX_RATE_POWER) 918 ratesArray[i] = AR5416_MAX_RATE_POWER; 919 } 920 921#ifdef AH_EEPROM_DUMP 922 ar5416PrintPowerPerRate(ah, ratesArray); 923#endif 924 925 /* Write the OFDM power per rate set */ 926 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE1, 927 POW_SM(ratesArray[rate18mb], 24) 928 | POW_SM(ratesArray[rate12mb], 16) 929 | POW_SM(ratesArray[rate9mb], 8) 930 | POW_SM(ratesArray[rate6mb], 0) 931 ); 932 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE2, 933 POW_SM(ratesArray[rate54mb], 24) 934 | POW_SM(ratesArray[rate48mb], 16) 935 | POW_SM(ratesArray[rate36mb], 8) 936 | POW_SM(ratesArray[rate24mb], 0) 937 ); 938 939 if (IS_CHAN_2GHZ(chan)) { 940 /* Write the CCK power per rate set */ 941 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE3, 942 POW_SM(ratesArray[rate2s], 24) 943 | POW_SM(ratesArray[rate2l], 16) 944 | POW_SM(ratesArray[rateXr], 8) /* XR target power */ 945 | POW_SM(ratesArray[rate1l], 0) 946 ); 947 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE4, 948 POW_SM(ratesArray[rate11s], 24) 949 | POW_SM(ratesArray[rate11l], 16) 950 | POW_SM(ratesArray[rate5_5s], 8) 951 | POW_SM(ratesArray[rate5_5l], 0) 952 ); 953 HALDEBUG(ah, HAL_DEBUG_RESET, 954 "%s AR_PHY_POWER_TX_RATE3=0x%x AR_PHY_POWER_TX_RATE4=0x%x\n", 955 __func__, OS_REG_READ(ah,AR_PHY_POWER_TX_RATE3), 956 OS_REG_READ(ah,AR_PHY_POWER_TX_RATE4)); 957 } 958 959 /* Write the HT20 power per rate set */ 960 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE5, 961 POW_SM(ratesArray[rateHt20_3], 24) 962 | POW_SM(ratesArray[rateHt20_2], 16) 963 | POW_SM(ratesArray[rateHt20_1], 8) 964 | POW_SM(ratesArray[rateHt20_0], 0) 965 ); 966 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE6, 967 POW_SM(ratesArray[rateHt20_7], 24) 968 | POW_SM(ratesArray[rateHt20_6], 16) 969 | POW_SM(ratesArray[rateHt20_5], 8) 970 | POW_SM(ratesArray[rateHt20_4], 0) 971 ); 972 973 if (IS_CHAN_HT40(chan)) { 974 /* Write the HT40 power per rate set */ 975 /* Correct PAR difference between HT40 and HT20/LEGACY */ 976 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE7, 977 POW_SM(ratesArray[rateHt40_3] + ht40PowerIncForPdadc, 24) 978 | POW_SM(ratesArray[rateHt40_2] + ht40PowerIncForPdadc, 16) 979 | POW_SM(ratesArray[rateHt40_1] + ht40PowerIncForPdadc, 8) 980 | POW_SM(ratesArray[rateHt40_0] + ht40PowerIncForPdadc, 0) 981 ); 982 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE8, 983 POW_SM(ratesArray[rateHt40_7] + ht40PowerIncForPdadc, 24) 984 | POW_SM(ratesArray[rateHt40_6] + ht40PowerIncForPdadc, 16) 985 | POW_SM(ratesArray[rateHt40_5] + ht40PowerIncForPdadc, 8) 986 | POW_SM(ratesArray[rateHt40_4] + ht40PowerIncForPdadc, 0) 987 ); 988 /* Write the Dup/Ext 40 power per rate set */ 989 OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE9, 990 POW_SM(ratesArray[rateExtOfdm], 24) 991 | POW_SM(ratesArray[rateExtCck], 16) 992 | POW_SM(ratesArray[rateDupOfdm], 8) 993 | POW_SM(ratesArray[rateDupCck], 0) 994 ); 995 } 996 997 /* Write the Power subtraction for dynamic chain changing, for per-packet powertx */ 998 OS_REG_WRITE(ah, AR_PHY_POWER_TX_SUB, 999 POW_SM(pModal->pwrDecreaseFor3Chain, 6) 1000 | POW_SM(pModal->pwrDecreaseFor2Chain, 0) 1001 ); 1002 return AH_TRUE; 1003#undef POW_SM 1004#undef N 1005} 1006 1007HAL_BOOL 1008ar5416SetTransmitPower(struct ath_hal *ah, HAL_CHANNEL *chan, 1009 uint16_t *rfXpdGain) 1010{ 1011 return _ar5416SetTransmitPower(ah, ath_hal_checkchannel(ah, chan), 1012 rfXpdGain); 1013} 1014 1015/* 1016 * Exported call to check for a recent gain reading and return 1017 * the current state of the thermal calibration gain engine. 1018 */ 1019HAL_RFGAIN 1020ar5416GetRfgain(struct ath_hal *ah) 1021{ 1022 return HAL_RFGAIN_INACTIVE; 1023} 1024 1025/* 1026 * Places all of hardware into reset 1027 */ 1028HAL_BOOL 1029ar5416Disable(struct ath_hal *ah) 1030{ 1031 if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) 1032 return AH_FALSE; 1033 return ar5416SetResetReg(ah, HAL_RESET_COLD); 1034} 1035 1036/* 1037 * Places the PHY and Radio chips into reset. A full reset 1038 * must be called to leave this state. The PCI/MAC/PCU are 1039 * not placed into reset as we must receive interrupt to 1040 * re-enable the hardware. 1041 */ 1042HAL_BOOL 1043ar5416PhyDisable(struct ath_hal *ah) 1044{ 1045 return ar5416SetResetReg(ah, HAL_RESET_WARM); 1046} 1047 1048/* 1049 * Write the given reset bit mask into the reset register 1050 */ 1051HAL_BOOL 1052ar5416SetResetReg(struct ath_hal *ah, uint32_t type) 1053{ 1054 switch (type) { 1055 case HAL_RESET_POWER_ON: 1056 return ar5416SetResetPowerOn(ah); 1057 case HAL_RESET_WARM: 1058 case HAL_RESET_COLD: 1059 return ar5416SetReset(ah, type); 1060 default: 1061 HALASSERT(AH_FALSE); 1062 return AH_FALSE; 1063 } 1064} 1065 1066static HAL_BOOL 1067ar5416SetResetPowerOn(struct ath_hal *ah) 1068{ 1069 /* Power On Reset (Hard Reset) */ 1070 1071 /* 1072 * Set force wake 1073 * 1074 * If the MAC was running, previously calling 1075 * reset will wake up the MAC but it may go back to sleep 1076 * before we can start polling. 1077 * Set force wake stops that 1078 * This must be called before initiating a hard reset. 1079 */ 1080 OS_REG_WRITE(ah, AR_RTC_FORCE_WAKE, 1081 AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT); 1082 1083 /* 1084 * RTC reset and clear 1085 */ 1086 OS_REG_WRITE(ah, AR_RC, AR_RC_AHB); 1087 OS_REG_WRITE(ah, AR_RTC_RESET, 0); 1088 OS_DELAY(20); 1089 OS_REG_WRITE(ah, AR_RC, 0); 1090 1091 OS_REG_WRITE(ah, AR_RTC_RESET, 1); 1092 1093 /* 1094 * Poll till RTC is ON 1095 */ 1096 if (!ath_hal_wait(ah, AR_RTC_STATUS, AR_RTC_PM_STATUS_M, AR_RTC_STATUS_ON)) { 1097 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RTC not waking up\n", __func__); 1098 return AH_FALSE; 1099 } 1100 1101 return ar5416SetReset(ah, HAL_RESET_COLD); 1102} 1103 1104static HAL_BOOL 1105ar5416SetReset(struct ath_hal *ah, int type) 1106{ 1107 uint32_t tmpReg; 1108 1109 /* 1110 * Force wake 1111 */ 1112 OS_REG_WRITE(ah, AR_RTC_FORCE_WAKE, 1113 AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT); 1114 1115 /* 1116 * Reset AHB 1117 */ 1118 tmpReg = OS_REG_READ(ah, AR_INTR_SYNC_CAUSE); 1119 if (tmpReg & (AR_INTR_SYNC_LOCAL_TIMEOUT|AR_INTR_SYNC_RADM_CPL_TIMEOUT)) { 1120 OS_REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0); 1121 OS_REG_WRITE(ah, AR_RC, AR_RC_AHB|AR_RC_HOSTIF); 1122 } else { 1123 OS_REG_WRITE(ah, AR_RC, AR_RC_AHB); 1124 } 1125 1126 /* 1127 * Set Mac(BB,Phy) Warm Reset 1128 */ 1129 switch (type) { 1130 case HAL_RESET_WARM: 1131 OS_REG_WRITE(ah, AR_RTC_RC, AR_RTC_RC_MAC_WARM); 1132 break; 1133 case HAL_RESET_COLD: 1134 OS_REG_WRITE(ah, AR_RTC_RC, AR_RTC_RC_MAC_WARM|AR_RTC_RC_MAC_COLD); 1135 break; 1136 default: 1137 HALASSERT(AH_FALSE); 1138 break; 1139 } 1140 1141 /* 1142 * Clear resets and force wakeup 1143 */ 1144 OS_REG_WRITE(ah, AR_RTC_RC, 0); 1145 if (!ath_hal_wait(ah, AR_RTC_RC, AR_RTC_RC_M, 0)) { 1146 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RTC stuck in MAC reset\n", __func__); 1147 return AH_FALSE; 1148 } 1149 1150 /* Clear AHB reset */ 1151 OS_REG_WRITE(ah, AR_RC, 0); 1152 1153 /* Set register and descriptor swapping on 1154 * Bigendian platforms on cold reset 1155 */ 1156 if (type == HAL_RESET_COLD) { 1157#ifdef __BIG_ENDIAN__ 1158 uint32_t mask; 1159 1160 HALDEBUG(ah, HAL_DEBUG_RESET, 1161 "%s Applying descriptor swap\n", __func__); 1162 1163 mask = INIT_CONFIG_STATUS | AR_CFG_SWRD | AR_CFG_SWRG; 1164#ifndef AH_NEED_DESC_SWAP 1165 mask |= AR_CFG_SWTD; 1166#endif 1167 OS_REG_WRITE(ah, AR_CFG, LE_READ_4(&mask)); 1168#else 1169 OS_REG_WRITE(ah, AR_CFG, INIT_CONFIG_STATUS); 1170#endif 1171 } 1172 1173 ar5416InitPLL(ah, AH_NULL); 1174 1175 return AH_TRUE; 1176} 1177 1178#ifndef IS_5GHZ_FAST_CLOCK_EN 1179#define IS_5GHZ_FAST_CLOCK_EN(ah, chan) AH_FALSE 1180#endif 1181 1182static void 1183ar5416InitPLL(struct ath_hal *ah, HAL_CHANNEL *chan) 1184{ 1185 uint32_t pll; 1186 1187 if (AR_SREV_MERLIN_10_OR_LATER(ah)) { 1188 pll = SM(0x5, AR_RTC_SOWL_PLL_REFDIV); 1189 1190 if (chan != AH_NULL && IS_CHAN_HALF_RATE(chan)) { 1191 pll |= SM(0x1, AR_RTC_SOWL_PLL_CLKSEL); 1192 } else if (chan && IS_CHAN_QUARTER_RATE(chan)) { 1193 pll |= SM(0x2, AR_RTC_SOWL_PLL_CLKSEL); 1194 } 1195 if (AR_SREV_MERLIN_20(ah) && 1196 chan != AH_NULL && IS_CHAN_5GHZ(chan)) { 1197 pll |= SM(0x28, AR_RTC_SOWL_PLL_DIV); 1198 1199 /* 1200 * PLL WAR for Merlin 2.0/2.1 1201 * When doing fast clock, set PLL to 0x142c 1202 * Else, set PLL to 0x2850 to prevent reset-to-reset variation 1203 */ 1204 if (AR_SREV_MERLIN_20(ah)) { 1205 if (IS_5GHZ_FAST_CLOCK_EN(ah, chan)) { 1206 pll = 0x142c; 1207 } else { 1208 pll = 0x2850; 1209 } 1210 } 1211 } else { 1212 pll |= SM(0x2c, AR_RTC_SOWL_PLL_DIV); 1213 } 1214 } else if (AR_SREV_SOWL_10_OR_LATER(ah)) { 1215 pll = SM(0x5, AR_RTC_SOWL_PLL_REFDIV); 1216 1217 if (chan != AH_NULL && IS_CHAN_HALF_RATE(chan)) { 1218 pll |= SM(0x1, AR_RTC_SOWL_PLL_CLKSEL); 1219 } else if (chan && IS_CHAN_QUARTER_RATE(chan)) { 1220 pll |= SM(0x2, AR_RTC_SOWL_PLL_CLKSEL); 1221 } 1222 if (chan != AH_NULL && IS_CHAN_5GHZ(chan)) { 1223 pll |= SM(0x50, AR_RTC_SOWL_PLL_DIV); 1224 } else { 1225 pll |= SM(0x58, AR_RTC_SOWL_PLL_DIV); 1226 } 1227 } else { 1228 pll = AR_RTC_PLL_REFDIV_5 | AR_RTC_PLL_DIV2; 1229 1230 if (chan != AH_NULL && IS_CHAN_HALF_RATE(chan)) { 1231 pll |= SM(0x1, AR_RTC_PLL_CLKSEL); 1232 } else if (chan != AH_NULL && IS_CHAN_QUARTER_RATE(chan)) { 1233 pll |= SM(0x2, AR_RTC_PLL_CLKSEL); 1234 } 1235 if (chan != AH_NULL && IS_CHAN_5GHZ(chan)) { 1236 pll |= SM(0xa, AR_RTC_PLL_DIV); 1237 } else { 1238 pll |= SM(0xb, AR_RTC_PLL_DIV); 1239 } 1240 } 1241 OS_REG_WRITE(ah, AR_RTC_PLL_CONTROL, pll); 1242 1243 /* TODO: 1244 * For multi-band owl, switch between bands by reiniting the PLL. 1245 */ 1246 1247 OS_DELAY(RTC_PLL_SETTLE_DELAY); 1248 1249 OS_REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_SLEEP_DERIVED_CLK); 1250} 1251 1252/* 1253 * Read EEPROM header info and program the device for correct operation 1254 * given the channel value. 1255 */ 1256HAL_BOOL 1257ar5416SetBoardValues(struct ath_hal *ah, HAL_CHANNEL *_chan) 1258{ 1259 HAL_CHANNEL_INTERNAL *chan; 1260 const HAL_EEPROM_v14 *ee = AH_PRIVATE(ah)->ah_eeprom; 1261 const struct ar5416eeprom *eep = &ee->ee_base; 1262 const MODAL_EEP_HEADER *pModal; 1263 int i, regChainOffset; 1264 uint8_t txRxAttenLocal; /* workaround for eeprom versions <= 14.2 */ 1265 1266 HALASSERT(AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER14_1); 1267 1268 chan = ath_hal_checkchannel(ah, _chan); 1269 pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]); 1270 1271 txRxAttenLocal = IS_CHAN_2GHZ(chan) ? 23 : 44; /* workaround for eeprom versions <= 14.2 */ 1272 1273 OS_REG_WRITE(ah, AR_PHY_SWITCH_COM, pModal->antCtrlCommon); 1274 for (i = 0; i < AR5416_MAX_CHAINS; i++) { 1275 if (AR_SREV_MERLIN(ah)) { 1276 if (i >= 2) break; 1277 } 1278 if (AR_SREV_OWL_20_OR_LATER(ah) && 1279 (AH5416(ah)->ah_rx_chainmask == 0x5 || 1280 AH5416(ah)->ah_tx_chainmask == 0x5) && i != 0) { 1281 /* Regs are swapped from chain 2 to 1 for 5416 2_0 with 1282 * only chains 0 and 2 populated 1283 */ 1284 regChainOffset = (i == 1) ? 0x2000 : 0x1000; 1285 } else { 1286 regChainOffset = i * 0x1000; 1287 } 1288 1289 OS_REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0 + regChainOffset, pModal->antCtrlChain[i]); 1290 OS_REG_WRITE(ah, AR_PHY_TIMING_CTRL4 + regChainOffset, 1291 (OS_REG_READ(ah, AR_PHY_TIMING_CTRL4 + regChainOffset) & 1292 ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF | AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) | 1293 SM(pModal->iqCalICh[i], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) | 1294 SM(pModal->iqCalQCh[i], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF)); 1295 1296 /* 1297 * Large signal upgrade. 1298 * XXX update 1299 */ 1300 1301 if ((i == 0) || AR_SREV_OWL_20_OR_LATER(ah)) { 1302 OS_REG_WRITE(ah, AR_PHY_RXGAIN + regChainOffset, 1303 (OS_REG_READ(ah, AR_PHY_RXGAIN + regChainOffset) & ~AR_PHY_RXGAIN_TXRX_ATTEN) | 1304 SM(IS_EEP_MINOR_V3(ah) ? pModal->txRxAttenCh[i] : txRxAttenLocal, 1305 AR_PHY_RXGAIN_TXRX_ATTEN)); 1306 1307 OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset, 1308 (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) & ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) | 1309 SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN)); 1310 } 1311 } 1312 1313 OS_REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH, pModal->switchSettling); 1314 OS_REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_ADC, pModal->adcDesiredSize); 1315 OS_REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_PGA, pModal->pgaDesiredSize); 1316 OS_REG_WRITE(ah, AR_PHY_RF_CTL4, 1317 SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF) 1318 | SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAB_OFF) 1319 | SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAA_ON) 1320 | SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAB_ON)); 1321 1322 OS_REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON, pModal->txEndToRxOn); 1323 1324 if (AR_SREV_MERLIN_10_OR_LATER(ah)) { 1325 OS_REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62, 1326 pModal->thresh62); 1327 OS_REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0, AR_PHY_EXT_CCA0_THRESH62, 1328 pModal->thresh62); 1329 } else { 1330 OS_REG_RMW_FIELD(ah, AR_PHY_CCA, AR_PHY_CCA_THRESH62, 1331 pModal->thresh62); 1332 OS_REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0, AR_PHY_EXT_CCA_THRESH62, 1333 pModal->thresh62); 1334 } 1335 1336 /* Minor Version Specific application */ 1337 if (IS_EEP_MINOR_V2(ah)) { 1338 OS_REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_FRAME_TO_DATA_START, pModal->txFrameToDataStart); 1339 OS_REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_FRAME_TO_PA_ON, pModal->txFrameToPaOn); 1340 } 1341 1342 if (IS_EEP_MINOR_V3(ah)) { 1343 if (IS_CHAN_HT40(chan)) { 1344 /* Overwrite switch settling with HT40 value */ 1345 OS_REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH, pModal->swSettleHt40); 1346 } 1347 1348 if ((AR_SREV_OWL_20_OR_LATER(ah)) && 1349 ( AH5416(ah)->ah_rx_chainmask == 0x5 || AH5416(ah)->ah_tx_chainmask == 0x5)){ 1350 /* Reg Offsets are swapped for logical mapping */ 1351 OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x1000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x1000) & ~AR_PHY_GAIN_2GHZ_BSW_MARGIN) | 1352 SM(pModal->bswMargin[2], AR_PHY_GAIN_2GHZ_BSW_MARGIN)); 1353 OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x1000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x1000) & ~AR_PHY_GAIN_2GHZ_BSW_ATTEN) | 1354 SM(pModal->bswAtten[2], AR_PHY_GAIN_2GHZ_BSW_ATTEN)); 1355 OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x2000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x2000) & ~AR_PHY_GAIN_2GHZ_BSW_MARGIN) | 1356 SM(pModal->bswMargin[1], AR_PHY_GAIN_2GHZ_BSW_MARGIN)); 1357 OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x2000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x2000) & ~AR_PHY_GAIN_2GHZ_BSW_ATTEN) | 1358 SM(pModal->bswAtten[1], AR_PHY_GAIN_2GHZ_BSW_ATTEN)); 1359 } else { 1360 OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x1000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x1000) & ~AR_PHY_GAIN_2GHZ_BSW_MARGIN) | 1361 SM(pModal->bswMargin[1], AR_PHY_GAIN_2GHZ_BSW_MARGIN)); 1362 OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x1000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x1000) & ~AR_PHY_GAIN_2GHZ_BSW_ATTEN) | 1363 SM(pModal->bswAtten[1], AR_PHY_GAIN_2GHZ_BSW_ATTEN)); 1364 OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x2000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x2000) & ~AR_PHY_GAIN_2GHZ_BSW_MARGIN) | 1365 SM(pModal->bswMargin[2],AR_PHY_GAIN_2GHZ_BSW_MARGIN)); 1366 OS_REG_WRITE(ah, AR_PHY_GAIN_2GHZ + 0x2000, (OS_REG_READ(ah, AR_PHY_GAIN_2GHZ + 0x2000) & ~AR_PHY_GAIN_2GHZ_BSW_ATTEN) | 1367 SM(pModal->bswAtten[2], AR_PHY_GAIN_2GHZ_BSW_ATTEN)); 1368 } 1369 OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ, AR_PHY_GAIN_2GHZ_BSW_MARGIN, pModal->bswMargin[0]); 1370 OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ, AR_PHY_GAIN_2GHZ_BSW_ATTEN, pModal->bswAtten[0]); 1371 } 1372 return AH_TRUE; 1373} 1374 1375/* 1376 * Helper functions common for AP/CB/XB 1377 */ 1378 1379/* 1380 * ar5416SetPowerPerRateTable 1381 * 1382 * Sets the transmit power in the baseband for the given 1383 * operating channel and mode. 1384 */ 1385static HAL_BOOL 1386ar5416SetPowerPerRateTable(struct ath_hal *ah, struct ar5416eeprom *pEepData, 1387 HAL_CHANNEL_INTERNAL *chan, 1388 int16_t *ratesArray, uint16_t cfgCtl, 1389 uint16_t AntennaReduction, 1390 uint16_t twiceMaxRegulatoryPower, 1391 uint16_t powerLimit) 1392{ 1393#define N(a) (sizeof(a)/sizeof(a[0])) 1394/* Local defines to distinguish between extension and control CTL's */ 1395#define EXT_ADDITIVE (0x8000) 1396#define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE) 1397#define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE) 1398#define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE) 1399 1400 uint16_t twiceMaxEdgePower = AR5416_MAX_RATE_POWER; 1401 int i; 1402 int16_t twiceLargestAntenna; 1403 CAL_CTL_DATA *rep; 1404 CAL_TARGET_POWER_LEG targetPowerOfdm, targetPowerCck = {0, {0, 0, 0, 0}}; 1405 CAL_TARGET_POWER_LEG targetPowerOfdmExt = {0, {0, 0, 0, 0}}, targetPowerCckExt = {0, {0, 0, 0, 0}}; 1406 CAL_TARGET_POWER_HT targetPowerHt20, targetPowerHt40 = {0, {0, 0, 0, 0}}; 1407 int16_t scaledPower, minCtlPower; 1408 1409#define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */ 1410#define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */ 1411 static const uint16_t ctlModesFor11a[] = { 1412 CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40 1413 }; 1414 static const uint16_t ctlModesFor11g[] = { 1415 CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT, CTL_2GHT40 1416 }; 1417 const uint16_t *pCtlMode; 1418 uint16_t numCtlModes, ctlMode, freq; 1419 CHAN_CENTERS centers; 1420 1421 ar5416GetChannelCenters(ah, chan, ¢ers); 1422 1423 /* Compute TxPower reduction due to Antenna Gain */ 1424 1425 twiceLargestAntenna = AH_MAX(AH_MAX(pEepData->modalHeader[IS_CHAN_2GHZ(chan)].antennaGainCh[0], 1426 pEepData->modalHeader[IS_CHAN_2GHZ(chan)].antennaGainCh[1]), 1427 pEepData->modalHeader[IS_CHAN_2GHZ(chan)].antennaGainCh[2]); 1428#if 0 1429 /* Turn it back on if we need to calculate per chain antenna gain reduction */ 1430 /* Use only if the expected gain > 6dbi */ 1431 /* Chain 0 is always used */ 1432 twiceLargestAntenna = pEepData->modalHeader[IS_CHAN_2GHZ(chan)].antennaGainCh[0]; 1433 1434 /* Look at antenna gains of Chains 1 and 2 if the TX mask is set */ 1435 if (ahp->ah_tx_chainmask & 0x2) 1436 twiceLargestAntenna = AH_MAX(twiceLargestAntenna, 1437 pEepData->modalHeader[IS_CHAN_2GHZ(chan)].antennaGainCh[1]); 1438 1439 if (ahp->ah_tx_chainmask & 0x4) 1440 twiceLargestAntenna = AH_MAX(twiceLargestAntenna, 1441 pEepData->modalHeader[IS_CHAN_2GHZ(chan)].antennaGainCh[2]); 1442#endif 1443 twiceLargestAntenna = (int16_t)AH_MIN((AntennaReduction) - twiceLargestAntenna, 0); 1444 1445 /* XXX setup for 5212 use (really used?) */ 1446 ath_hal_eepromSet(ah, 1447 IS_CHAN_2GHZ(chan) ? AR_EEP_ANTGAINMAX_2 : AR_EEP_ANTGAINMAX_5, 1448 twiceLargestAntenna); 1449 1450 /* 1451 * scaledPower is the minimum of the user input power level and 1452 * the regulatory allowed power level 1453 */ 1454 scaledPower = AH_MIN(powerLimit, twiceMaxRegulatoryPower + twiceLargestAntenna); 1455 1456 /* Reduce scaled Power by number of chains active to get to per chain tx power level */ 1457 /* TODO: better value than these? */ 1458 switch (owl_get_ntxchains(AH5416(ah)->ah_tx_chainmask)) { 1459 case 1: 1460 break; 1461 case 2: 1462 scaledPower -= pEepData->modalHeader[IS_CHAN_2GHZ(chan)].pwrDecreaseFor2Chain; 1463 break; 1464 case 3: 1465 scaledPower -= pEepData->modalHeader[IS_CHAN_2GHZ(chan)].pwrDecreaseFor3Chain; 1466 break; 1467 default: 1468 return AH_FALSE; /* Unsupported number of chains */ 1469 } 1470 1471 scaledPower = AH_MAX(0, scaledPower); 1472 1473 /* Get target powers from EEPROM - our baseline for TX Power */ 1474 if (IS_CHAN_2GHZ(chan)) { 1475 /* Setup for CTL modes */ 1476 numCtlModes = N(ctlModesFor11g) - SUB_NUM_CTL_MODES_AT_2G_40; /* CTL_11B, CTL_11G, CTL_2GHT20 */ 1477 pCtlMode = ctlModesFor11g; 1478 1479 ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPowerCck, 1480 AR5416_NUM_2G_CCK_TARGET_POWERS, &targetPowerCck, 4, AH_FALSE); 1481 ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPower2G, 1482 AR5416_NUM_2G_20_TARGET_POWERS, &targetPowerOfdm, 4, AH_FALSE); 1483 ar5416GetTargetPowers(ah, chan, pEepData->calTargetPower2GHT20, 1484 AR5416_NUM_2G_20_TARGET_POWERS, &targetPowerHt20, 8, AH_FALSE); 1485 1486 if (IS_CHAN_HT40(chan)) { 1487 numCtlModes = N(ctlModesFor11g); /* All 2G CTL's */ 1488 1489 ar5416GetTargetPowers(ah, chan, pEepData->calTargetPower2GHT40, 1490 AR5416_NUM_2G_40_TARGET_POWERS, &targetPowerHt40, 8, AH_TRUE); 1491 /* Get target powers for extension channels */ 1492 ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPowerCck, 1493 AR5416_NUM_2G_CCK_TARGET_POWERS, &targetPowerCckExt, 4, AH_TRUE); 1494 ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPower2G, 1495 AR5416_NUM_2G_20_TARGET_POWERS, &targetPowerOfdmExt, 4, AH_TRUE); 1496 } 1497 } else { 1498 /* Setup for CTL modes */ 1499 numCtlModes = N(ctlModesFor11a) - SUB_NUM_CTL_MODES_AT_5G_40; /* CTL_11A, CTL_5GHT20 */ 1500 pCtlMode = ctlModesFor11a; 1501 1502 ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPower5G, 1503 AR5416_NUM_5G_20_TARGET_POWERS, &targetPowerOfdm, 4, AH_FALSE); 1504 ar5416GetTargetPowers(ah, chan, pEepData->calTargetPower5GHT20, 1505 AR5416_NUM_5G_20_TARGET_POWERS, &targetPowerHt20, 8, AH_FALSE); 1506 1507 if (IS_CHAN_HT40(chan)) { 1508 numCtlModes = N(ctlModesFor11a); /* All 5G CTL's */ 1509 1510 ar5416GetTargetPowers(ah, chan, pEepData->calTargetPower5GHT40, 1511 AR5416_NUM_5G_40_TARGET_POWERS, &targetPowerHt40, 8, AH_TRUE); 1512 ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPower5G, 1513 AR5416_NUM_5G_20_TARGET_POWERS, &targetPowerOfdmExt, 4, AH_TRUE); 1514 } 1515 } 1516 1517 /* 1518 * For MIMO, need to apply regulatory caps individually across dynamically 1519 * running modes: CCK, OFDM, HT20, HT40 1520 * 1521 * The outer loop walks through each possible applicable runtime mode. 1522 * The inner loop walks through each ctlIndex entry in EEPROM. 1523 * The ctl value is encoded as [7:4] == test group, [3:0] == test mode. 1524 * 1525 */ 1526 for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) { 1527 1528 HAL_BOOL isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) || 1529 (pCtlMode[ctlMode] == CTL_2GHT40); 1530 if (isHt40CtlMode) { 1531 freq = centers.ctl_center; 1532 } else if (pCtlMode[ctlMode] & EXT_ADDITIVE) { 1533 freq = centers.ext_center; 1534 } else { 1535 freq = centers.ctl_center; 1536 } 1537 1538 /* walk through each CTL index stored in EEPROM */ 1539 for (i = 0; (i < AR5416_NUM_CTLS) && pEepData->ctlIndex[i]; i++) { 1540 uint16_t twiceMinEdgePower; 1541 1542 /* compare test group from regulatory channel list with test mode from pCtlMode list */ 1543 if ((((cfgCtl & ~CTL_MODE_M) | (pCtlMode[ctlMode] & CTL_MODE_M)) == pEepData->ctlIndex[i]) || 1544 (((cfgCtl & ~CTL_MODE_M) | (pCtlMode[ctlMode] & CTL_MODE_M)) == 1545 ((pEepData->ctlIndex[i] & CTL_MODE_M) | SD_NO_CTL))) { 1546 rep = &(pEepData->ctlData[i]); 1547 twiceMinEdgePower = ar5416GetMaxEdgePower(freq, 1548 rep->ctlEdges[owl_get_ntxchains(AH5416(ah)->ah_tx_chainmask) - 1], 1549 IS_CHAN_2GHZ(chan)); 1550 if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) { 1551 /* Find the minimum of all CTL edge powers that apply to this channel */ 1552 twiceMaxEdgePower = AH_MIN(twiceMaxEdgePower, twiceMinEdgePower); 1553 } else { 1554 /* specific */ 1555 twiceMaxEdgePower = twiceMinEdgePower; 1556 break; 1557 } 1558 } 1559 } 1560 minCtlPower = (uint8_t)AH_MIN(twiceMaxEdgePower, scaledPower); 1561 /* Apply ctl mode to correct target power set */ 1562 switch(pCtlMode[ctlMode]) { 1563 case CTL_11B: 1564 for (i = 0; i < N(targetPowerCck.tPow2x); i++) { 1565 targetPowerCck.tPow2x[i] = (uint8_t)AH_MIN(targetPowerCck.tPow2x[i], minCtlPower); 1566 } 1567 break; 1568 case CTL_11A: 1569 case CTL_11G: 1570 for (i = 0; i < N(targetPowerOfdm.tPow2x); i++) { 1571 targetPowerOfdm.tPow2x[i] = (uint8_t)AH_MIN(targetPowerOfdm.tPow2x[i], minCtlPower); 1572 } 1573 break; 1574 case CTL_5GHT20: 1575 case CTL_2GHT20: 1576 for (i = 0; i < N(targetPowerHt20.tPow2x); i++) { 1577 targetPowerHt20.tPow2x[i] = (uint8_t)AH_MIN(targetPowerHt20.tPow2x[i], minCtlPower); 1578 } 1579 break; 1580 case CTL_11B_EXT: 1581 targetPowerCckExt.tPow2x[0] = (uint8_t)AH_MIN(targetPowerCckExt.tPow2x[0], minCtlPower); 1582 break; 1583 case CTL_11A_EXT: 1584 case CTL_11G_EXT: 1585 targetPowerOfdmExt.tPow2x[0] = (uint8_t)AH_MIN(targetPowerOfdmExt.tPow2x[0], minCtlPower); 1586 break; 1587 case CTL_5GHT40: 1588 case CTL_2GHT40: 1589 for (i = 0; i < N(targetPowerHt40.tPow2x); i++) { 1590 targetPowerHt40.tPow2x[i] = (uint8_t)AH_MIN(targetPowerHt40.tPow2x[i], minCtlPower); 1591 } 1592 break; 1593 default: 1594 return AH_FALSE; 1595 break; 1596 } 1597 } /* end ctl mode checking */ 1598 1599 /* Set rates Array from collected data */ 1600 ratesArray[rate6mb] = ratesArray[rate9mb] = ratesArray[rate12mb] = ratesArray[rate18mb] = ratesArray[rate24mb] = targetPowerOfdm.tPow2x[0]; 1601 ratesArray[rate36mb] = targetPowerOfdm.tPow2x[1]; 1602 ratesArray[rate48mb] = targetPowerOfdm.tPow2x[2]; 1603 ratesArray[rate54mb] = targetPowerOfdm.tPow2x[3]; 1604 ratesArray[rateXr] = targetPowerOfdm.tPow2x[0]; 1605 1606 for (i = 0; i < N(targetPowerHt20.tPow2x); i++) { 1607 ratesArray[rateHt20_0 + i] = targetPowerHt20.tPow2x[i]; 1608 } 1609 1610 if (IS_CHAN_2GHZ(chan)) { 1611 ratesArray[rate1l] = targetPowerCck.tPow2x[0]; 1612 ratesArray[rate2s] = ratesArray[rate2l] = targetPowerCck.tPow2x[1]; 1613 ratesArray[rate5_5s] = ratesArray[rate5_5l] = targetPowerCck.tPow2x[2]; 1614 ratesArray[rate11s] = ratesArray[rate11l] = targetPowerCck.tPow2x[3]; 1615 } 1616 if (IS_CHAN_HT40(chan)) { 1617 for (i = 0; i < N(targetPowerHt40.tPow2x); i++) { 1618 ratesArray[rateHt40_0 + i] = targetPowerHt40.tPow2x[i]; 1619 } 1620 ratesArray[rateDupOfdm] = targetPowerHt40.tPow2x[0]; 1621 ratesArray[rateDupCck] = targetPowerHt40.tPow2x[0]; 1622 ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0]; 1623 if (IS_CHAN_2GHZ(chan)) { 1624 ratesArray[rateExtCck] = targetPowerCckExt.tPow2x[0]; 1625 } 1626 } 1627 return AH_TRUE; 1628#undef EXT_ADDITIVE 1629#undef CTL_11A_EXT 1630#undef CTL_11G_EXT 1631#undef CTL_11B_EXT 1632#undef SUB_NUM_CTL_MODES_AT_5G_40 1633#undef SUB_NUM_CTL_MODES_AT_2G_40 1634#undef N 1635} 1636 1637/************************************************************************** 1638 * fbin2freq 1639 * 1640 * Get channel value from binary representation held in eeprom 1641 * RETURNS: the frequency in MHz 1642 */ 1643static uint16_t 1644fbin2freq(uint8_t fbin, HAL_BOOL is2GHz) 1645{ 1646 /* 1647 * Reserved value 0xFF provides an empty definition both as 1648 * an fbin and as a frequency - do not convert 1649 */ 1650 if (fbin == AR5416_BCHAN_UNUSED) { 1651 return fbin; 1652 } 1653 1654 return (uint16_t)((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin)); 1655} 1656 1657/* 1658 * ar5416GetMaxEdgePower 1659 * 1660 * Find the maximum conformance test limit for the given channel and CTL info 1661 */ 1662static uint16_t 1663ar5416GetMaxEdgePower(uint16_t freq, CAL_CTL_EDGES *pRdEdgesPower, HAL_BOOL is2GHz) 1664{ 1665 uint16_t twiceMaxEdgePower = AR5416_MAX_RATE_POWER; 1666 int i; 1667 1668 /* Get the edge power */ 1669 for (i = 0; (i < AR5416_NUM_BAND_EDGES) && (pRdEdgesPower[i].bChannel != AR5416_BCHAN_UNUSED) ; i++) { 1670 /* 1671 * If there's an exact channel match or an inband flag set 1672 * on the lower channel use the given rdEdgePower 1673 */ 1674 if (freq == fbin2freq(pRdEdgesPower[i].bChannel, is2GHz)) { 1675 twiceMaxEdgePower = MS(pRdEdgesPower[i].tPowerFlag, CAL_CTL_EDGES_POWER); 1676 break; 1677 } else if ((i > 0) && (freq < fbin2freq(pRdEdgesPower[i].bChannel, is2GHz))) { 1678 if (fbin2freq(pRdEdgesPower[i - 1].bChannel, is2GHz) < freq && (pRdEdgesPower[i - 1].tPowerFlag & CAL_CTL_EDGES_FLAG) != 0) { 1679 twiceMaxEdgePower = MS(pRdEdgesPower[i - 1].tPowerFlag, CAL_CTL_EDGES_POWER); 1680 } 1681 /* Leave loop - no more affecting edges possible in this monotonic increasing list */ 1682 break; 1683 } 1684 } 1685 HALASSERT(twiceMaxEdgePower > 0); 1686 return twiceMaxEdgePower; 1687} 1688 1689/************************************************************** 1690 * ar5416GetTargetPowers 1691 * 1692 * Return the rates of target power for the given target power table 1693 * channel, and number of channels 1694 */ 1695void 1696ar5416GetTargetPowers(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, 1697 CAL_TARGET_POWER_HT *powInfo, uint16_t numChannels, 1698 CAL_TARGET_POWER_HT *pNewPower, uint16_t numRates, 1699 HAL_BOOL isHt40Target) 1700{ 1701 uint16_t clo, chi; 1702 int i; 1703 int matchIndex = -1, lowIndex = -1; 1704 uint16_t freq; 1705 CHAN_CENTERS centers; 1706 1707 ar5416GetChannelCenters(ah, chan, ¢ers); 1708 freq = isHt40Target ? centers.synth_center : centers.ctl_center; 1709 1710 /* Copy the target powers into the temp channel list */ 1711 if (freq <= fbin2freq(powInfo[0].bChannel, IS_CHAN_2GHZ(chan))) { 1712 matchIndex = 0; 1713 } else { 1714 for (i = 0; (i < numChannels) && (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) { 1715 if (freq == fbin2freq(powInfo[i].bChannel, IS_CHAN_2GHZ(chan))) { 1716 matchIndex = i; 1717 break; 1718 } else if ((freq < fbin2freq(powInfo[i].bChannel, IS_CHAN_2GHZ(chan))) && 1719 (freq > fbin2freq(powInfo[i - 1].bChannel, IS_CHAN_2GHZ(chan)))) 1720 { 1721 lowIndex = i - 1; 1722 break; 1723 } 1724 } 1725 if ((matchIndex == -1) && (lowIndex == -1)) { 1726 HALASSERT(freq > fbin2freq(powInfo[i - 1].bChannel, IS_CHAN_2GHZ(chan))); 1727 matchIndex = i - 1; 1728 } 1729 } 1730 1731 if (matchIndex != -1) { 1732 OS_MEMCPY(pNewPower, &powInfo[matchIndex], sizeof(*pNewPower)); 1733 } else { 1734 HALASSERT(lowIndex != -1); 1735 /* 1736 * Get the lower and upper channels, target powers, 1737 * and interpolate between them. 1738 */ 1739 clo = fbin2freq(powInfo[lowIndex].bChannel, IS_CHAN_2GHZ(chan)); 1740 chi = fbin2freq(powInfo[lowIndex + 1].bChannel, IS_CHAN_2GHZ(chan)); 1741 1742 for (i = 0; i < numRates; i++) { 1743 pNewPower->tPow2x[i] = (uint8_t)interpolate(freq, clo, chi, 1744 powInfo[lowIndex].tPow2x[i], powInfo[lowIndex + 1].tPow2x[i]); 1745 } 1746 } 1747} 1748/************************************************************** 1749 * ar5416GetTargetPowersLeg 1750 * 1751 * Return the four rates of target power for the given target power table 1752 * channel, and number of channels 1753 */ 1754void 1755ar5416GetTargetPowersLeg(struct ath_hal *ah, 1756 HAL_CHANNEL_INTERNAL *chan, 1757 CAL_TARGET_POWER_LEG *powInfo, uint16_t numChannels, 1758 CAL_TARGET_POWER_LEG *pNewPower, uint16_t numRates, 1759 HAL_BOOL isExtTarget) 1760{ 1761 uint16_t clo, chi; 1762 int i; 1763 int matchIndex = -1, lowIndex = -1; 1764 uint16_t freq; 1765 CHAN_CENTERS centers; 1766 1767 ar5416GetChannelCenters(ah, chan, ¢ers); 1768 freq = (isExtTarget) ? centers.ext_center :centers.ctl_center; 1769 1770 /* Copy the target powers into the temp channel list */ 1771 if (freq <= fbin2freq(powInfo[0].bChannel, IS_CHAN_2GHZ(chan))) { 1772 matchIndex = 0; 1773 } else { 1774 for (i = 0; (i < numChannels) && (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) { 1775 if (freq == fbin2freq(powInfo[i].bChannel, IS_CHAN_2GHZ(chan))) { 1776 matchIndex = i; 1777 break; 1778 } else if ((freq < fbin2freq(powInfo[i].bChannel, IS_CHAN_2GHZ(chan))) && 1779 (freq > fbin2freq(powInfo[i - 1].bChannel, IS_CHAN_2GHZ(chan)))) 1780 { 1781 lowIndex = i - 1; 1782 break; 1783 } 1784 } 1785 if ((matchIndex == -1) && (lowIndex == -1)) { 1786 HALASSERT(freq > fbin2freq(powInfo[i - 1].bChannel, IS_CHAN_2GHZ(chan))); 1787 matchIndex = i - 1; 1788 } 1789 } 1790 1791 if (matchIndex != -1) { 1792 OS_MEMCPY(pNewPower, &powInfo[matchIndex], sizeof(*pNewPower)); 1793 } else { 1794 HALASSERT(lowIndex != -1); 1795 /* 1796 * Get the lower and upper channels, target powers, 1797 * and interpolate between them. 1798 */ 1799 clo = fbin2freq(powInfo[lowIndex].bChannel, IS_CHAN_2GHZ(chan)); 1800 chi = fbin2freq(powInfo[lowIndex + 1].bChannel, IS_CHAN_2GHZ(chan)); 1801 1802 for (i = 0; i < numRates; i++) { 1803 pNewPower->tPow2x[i] = (uint8_t)interpolate(freq, clo, chi, 1804 powInfo[lowIndex].tPow2x[i], powInfo[lowIndex + 1].tPow2x[i]); 1805 } 1806 } 1807} 1808 1809/************************************************************** 1810 * ar5416SetPowerCalTable 1811 * 1812 * Pull the PDADC piers from cal data and interpolate them across the given 1813 * points as well as from the nearest pier(s) to get a power detector 1814 * linear voltage to power level table. 1815 */ 1816static HAL_BOOL 1817ar5416SetPowerCalTable(struct ath_hal *ah, struct ar5416eeprom *pEepData, HAL_CHANNEL_INTERNAL *chan, int16_t *pTxPowerIndexOffset) 1818{ 1819 CAL_DATA_PER_FREQ *pRawDataset; 1820 uint8_t *pCalBChans = AH_NULL; 1821 uint16_t pdGainOverlap_t2; 1822 static uint8_t pdadcValues[AR5416_NUM_PDADC_VALUES]; 1823 uint16_t gainBoundaries[AR5416_PD_GAINS_IN_MASK]; 1824 uint16_t numPiers, i, j; 1825 int16_t tMinCalPower; 1826 uint16_t numXpdGain, xpdMask; 1827 uint16_t xpdGainValues[AR5416_NUM_PD_GAINS]; 1828 uint32_t reg32, regOffset, regChainOffset; 1829 1830 ath_hal_memzero(xpdGainValues, sizeof(xpdGainValues)); 1831 1832 xpdMask = pEepData->modalHeader[IS_CHAN_2GHZ(chan)].xpdGain; 1833 1834 if (IS_EEP_MINOR_V2(ah)) { 1835 pdGainOverlap_t2 = pEepData->modalHeader[IS_CHAN_2GHZ(chan)].pdGainOverlap; 1836 } else { 1837 pdGainOverlap_t2 = (uint16_t)(MS(OS_REG_READ(ah, AR_PHY_TPCRG5), AR_PHY_TPCRG5_PD_GAIN_OVERLAP)); 1838 } 1839 1840 if (IS_CHAN_2GHZ(chan)) { 1841 pCalBChans = pEepData->calFreqPier2G; 1842 numPiers = AR5416_NUM_2G_CAL_PIERS; 1843 } else { 1844 pCalBChans = pEepData->calFreqPier5G; 1845 numPiers = AR5416_NUM_5G_CAL_PIERS; 1846 } 1847 1848 numXpdGain = 0; 1849 /* Calculate the value of xpdgains from the xpdGain Mask */ 1850 for (i = 1; i <= AR5416_PD_GAINS_IN_MASK; i++) { 1851 if ((xpdMask >> (AR5416_PD_GAINS_IN_MASK - i)) & 1) { 1852 if (numXpdGain >= AR5416_NUM_PD_GAINS) { 1853 HALASSERT(0); 1854 break; 1855 } 1856 xpdGainValues[numXpdGain] = (uint16_t)(AR5416_PD_GAINS_IN_MASK - i); 1857 numXpdGain++; 1858 } 1859 } 1860 1861 /* Write the detector gain biases and their number */ 1862 OS_REG_WRITE(ah, AR_PHY_TPCRG1, (OS_REG_READ(ah, AR_PHY_TPCRG1) & 1863 ~(AR_PHY_TPCRG1_NUM_PD_GAIN | AR_PHY_TPCRG1_PD_GAIN_1 | AR_PHY_TPCRG1_PD_GAIN_2 | AR_PHY_TPCRG1_PD_GAIN_3)) | 1864 SM(numXpdGain - 1, AR_PHY_TPCRG1_NUM_PD_GAIN) | SM(xpdGainValues[0], AR_PHY_TPCRG1_PD_GAIN_1 ) | 1865 SM(xpdGainValues[1], AR_PHY_TPCRG1_PD_GAIN_2) | SM(xpdGainValues[2], AR_PHY_TPCRG1_PD_GAIN_3)); 1866 1867 for (i = 0; i < AR5416_MAX_CHAINS; i++) { 1868 1869 if (AR_SREV_OWL_20_OR_LATER(ah) && 1870 ( AH5416(ah)->ah_rx_chainmask == 0x5 || AH5416(ah)->ah_tx_chainmask == 0x5) && (i != 0)) { 1871 /* Regs are swapped from chain 2 to 1 for 5416 2_0 with 1872 * only chains 0 and 2 populated 1873 */ 1874 regChainOffset = (i == 1) ? 0x2000 : 0x1000; 1875 } else { 1876 regChainOffset = i * 0x1000; 1877 } 1878 1879 if (pEepData->baseEepHeader.txMask & (1 << i)) { 1880 if (IS_CHAN_2GHZ(chan)) { 1881 pRawDataset = pEepData->calPierData2G[i]; 1882 } else { 1883 pRawDataset = pEepData->calPierData5G[i]; 1884 } 1885 1886 ar5416GetGainBoundariesAndPdadcs(ah, chan, pRawDataset, 1887 pCalBChans, numPiers, 1888 pdGainOverlap_t2, 1889 &tMinCalPower, gainBoundaries, 1890 pdadcValues, numXpdGain); 1891 1892 if ((i == 0) || AR_SREV_OWL_20_OR_LATER(ah)) { 1893 /* 1894 * Note the pdadc table may not start at 0 dBm power, could be 1895 * negative or greater than 0. Need to offset the power 1896 * values by the amount of minPower for griffin 1897 */ 1898 1899 OS_REG_WRITE(ah, AR_PHY_TPCRG5 + regChainOffset, 1900 SM(pdGainOverlap_t2, AR_PHY_TPCRG5_PD_GAIN_OVERLAP) | 1901 SM(gainBoundaries[0], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1) | 1902 SM(gainBoundaries[1], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2) | 1903 SM(gainBoundaries[2], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3) | 1904 SM(gainBoundaries[3], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4)); 1905 } 1906 1907 /* Write the power values into the baseband power table */ 1908 regOffset = AR_PHY_BASE + (672 << 2) + regChainOffset; 1909 1910 for (j = 0; j < 32; j++) { 1911 reg32 = ((pdadcValues[4*j + 0] & 0xFF) << 0) | 1912 ((pdadcValues[4*j + 1] & 0xFF) << 8) | 1913 ((pdadcValues[4*j + 2] & 0xFF) << 16) | 1914 ((pdadcValues[4*j + 3] & 0xFF) << 24) ; 1915 OS_REG_WRITE(ah, regOffset, reg32); 1916 1917#ifdef PDADC_DUMP 1918 ath_hal_printf(ah, "PDADC: Chain %d | PDADC %3d Value %3d | PDADC %3d Value %3d | PDADC %3d Value %3d | PDADC %3d Value %3d |\n", 1919 i, 1920 4*j, pdadcValues[4*j], 1921 4*j+1, pdadcValues[4*j + 1], 1922 4*j+2, pdadcValues[4*j + 2], 1923 4*j+3, pdadcValues[4*j + 3]); 1924#endif 1925 regOffset += 4; 1926 } 1927 } 1928 } 1929 *pTxPowerIndexOffset = 0; 1930 1931 return AH_TRUE; 1932} 1933 1934/************************************************************** 1935 * ar5416GetGainBoundariesAndPdadcs 1936 * 1937 * Uses the data points read from EEPROM to reconstruct the pdadc power table 1938 * Called by ar5416SetPowerCalTable only. 1939 */ 1940static void 1941ar5416GetGainBoundariesAndPdadcs(struct ath_hal *ah, 1942 HAL_CHANNEL_INTERNAL *chan, CAL_DATA_PER_FREQ *pRawDataSet, 1943 uint8_t * bChans, uint16_t availPiers, 1944 uint16_t tPdGainOverlap, int16_t *pMinCalPower, uint16_t * pPdGainBoundaries, 1945 uint8_t * pPDADCValues, uint16_t numXpdGains) 1946{ 1947 1948 int i, j, k; 1949 int16_t ss; /* potentially -ve index for taking care of pdGainOverlap */ 1950 uint16_t idxL = 0, idxR = 0, numPiers; /* Pier indexes */ 1951 1952 /* filled out Vpd table for all pdGains (chanL) */ 1953 static uint8_t vpdTableL[AR5416_NUM_PD_GAINS][AR5416_MAX_PWR_RANGE_IN_HALF_DB]; 1954 1955 /* filled out Vpd table for all pdGains (chanR) */ 1956 static uint8_t vpdTableR[AR5416_NUM_PD_GAINS][AR5416_MAX_PWR_RANGE_IN_HALF_DB]; 1957 1958 /* filled out Vpd table for all pdGains (interpolated) */ 1959 static uint8_t vpdTableI[AR5416_NUM_PD_GAINS][AR5416_MAX_PWR_RANGE_IN_HALF_DB]; 1960 1961 uint8_t *pVpdL, *pVpdR, *pPwrL, *pPwrR; 1962 uint8_t minPwrT4[AR5416_NUM_PD_GAINS]; 1963 uint8_t maxPwrT4[AR5416_NUM_PD_GAINS]; 1964 int16_t vpdStep; 1965 int16_t tmpVal; 1966 uint16_t sizeCurrVpdTable, maxIndex, tgtIndex; 1967 HAL_BOOL match; 1968 int16_t minDelta = 0; 1969 CHAN_CENTERS centers; 1970 1971 ar5416GetChannelCenters(ah, chan, ¢ers); 1972 1973 /* Trim numPiers for the number of populated channel Piers */ 1974 for (numPiers = 0; numPiers < availPiers; numPiers++) { 1975 if (bChans[numPiers] == AR5416_BCHAN_UNUSED) { 1976 break; 1977 } 1978 } 1979 1980 /* Find pier indexes around the current channel */ 1981 match = getLowerUpperIndex((uint8_t)FREQ2FBIN(centers.synth_center, IS_CHAN_2GHZ(chan)), 1982 bChans, numPiers, &idxL, &idxR); 1983 1984 if (match) { 1985 /* Directly fill both vpd tables from the matching index */ 1986 for (i = 0; i < numXpdGains; i++) { 1987 minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0]; 1988 maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4]; 1989 ar5416FillVpdTable(minPwrT4[i], maxPwrT4[i], pRawDataSet[idxL].pwrPdg[i], 1990 pRawDataSet[idxL].vpdPdg[i], AR5416_PD_GAIN_ICEPTS, vpdTableI[i]); 1991 } 1992 } else { 1993 for (i = 0; i < numXpdGains; i++) { 1994 pVpdL = pRawDataSet[idxL].vpdPdg[i]; 1995 pPwrL = pRawDataSet[idxL].pwrPdg[i]; 1996 pVpdR = pRawDataSet[idxR].vpdPdg[i]; 1997 pPwrR = pRawDataSet[idxR].pwrPdg[i]; 1998 1999 /* Start Vpd interpolation from the max of the minimum powers */ 2000 minPwrT4[i] = AH_MAX(pPwrL[0], pPwrR[0]); 2001 2002 /* End Vpd interpolation from the min of the max powers */ 2003 maxPwrT4[i] = AH_MIN(pPwrL[AR5416_PD_GAIN_ICEPTS - 1], pPwrR[AR5416_PD_GAIN_ICEPTS - 1]); 2004 HALASSERT(maxPwrT4[i] > minPwrT4[i]); 2005 2006 /* Fill pier Vpds */ 2007 ar5416FillVpdTable(minPwrT4[i], maxPwrT4[i], pPwrL, pVpdL, AR5416_PD_GAIN_ICEPTS, vpdTableL[i]); 2008 ar5416FillVpdTable(minPwrT4[i], maxPwrT4[i], pPwrR, pVpdR, AR5416_PD_GAIN_ICEPTS, vpdTableR[i]); 2009 2010 /* Interpolate the final vpd */ 2011 for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) { 2012 vpdTableI[i][j] = (uint8_t)(interpolate((uint16_t)FREQ2FBIN(centers.synth_center, IS_CHAN_2GHZ(chan)), 2013 bChans[idxL], bChans[idxR], vpdTableL[i][j], vpdTableR[i][j])); 2014 } 2015 } 2016 } 2017 *pMinCalPower = (int16_t)(minPwrT4[0] / 2); 2018 2019 k = 0; /* index for the final table */ 2020 for (i = 0; i < numXpdGains; i++) { 2021 if (i == (numXpdGains - 1)) { 2022 pPdGainBoundaries[i] = (uint16_t)(maxPwrT4[i] / 2); 2023 } else { 2024 pPdGainBoundaries[i] = (uint16_t)((maxPwrT4[i] + minPwrT4[i+1]) / 4); 2025 } 2026 2027 pPdGainBoundaries[i] = (uint16_t)AH_MIN(AR5416_MAX_RATE_POWER, pPdGainBoundaries[i]); 2028 2029 /* NB: only applies to owl 1.0 */ 2030 if ((i == 0) && !AR_SREV_OWL_20_OR_LATER(ah) ) { 2031 /* 2032 * fix the gain delta, but get a delta that can be applied to min to 2033 * keep the upper power values accurate, don't think max needs to 2034 * be adjusted because should not be at that area of the table? 2035 */ 2036 minDelta = pPdGainBoundaries[0] - 23; 2037 pPdGainBoundaries[0] = 23; 2038 } 2039 else { 2040 minDelta = 0; 2041 } 2042 2043 /* Find starting index for this pdGain */ 2044 if (i == 0) { 2045 ss = 0; /* for the first pdGain, start from index 0 */ 2046 } else { 2047 /* need overlap entries extrapolated below. */ 2048 ss = (int16_t)((pPdGainBoundaries[i-1] - (minPwrT4[i] / 2)) - tPdGainOverlap + 1 + minDelta); 2049 } 2050 vpdStep = (int16_t)(vpdTableI[i][1] - vpdTableI[i][0]); 2051 vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep); 2052 /* 2053 *-ve ss indicates need to extrapolate data below for this pdGain 2054 */ 2055 while ((ss < 0) && (k < (AR5416_NUM_PDADC_VALUES - 1))) { 2056 tmpVal = (int16_t)(vpdTableI[i][0] + ss * vpdStep); 2057 pPDADCValues[k++] = (uint8_t)((tmpVal < 0) ? 0 : tmpVal); 2058 ss++; 2059 } 2060 2061 sizeCurrVpdTable = (uint8_t)((maxPwrT4[i] - minPwrT4[i]) / 2 +1); 2062 tgtIndex = (uint8_t)(pPdGainBoundaries[i] + tPdGainOverlap - (minPwrT4[i] / 2)); 2063 maxIndex = (tgtIndex < sizeCurrVpdTable) ? tgtIndex : sizeCurrVpdTable; 2064 2065 while ((ss < maxIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1))) { 2066 pPDADCValues[k++] = vpdTableI[i][ss++]; 2067 } 2068 2069 vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] - vpdTableI[i][sizeCurrVpdTable - 2]); 2070 vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep); 2071 /* 2072 * for last gain, pdGainBoundary == Pmax_t2, so will 2073 * have to extrapolate 2074 */ 2075 if (tgtIndex > maxIndex) { /* need to extrapolate above */ 2076 while ((ss <= tgtIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1))) { 2077 tmpVal = (int16_t)((vpdTableI[i][sizeCurrVpdTable - 1] + 2078 (ss - maxIndex +1) * vpdStep)); 2079 pPDADCValues[k++] = (uint8_t)((tmpVal > 255) ? 255 : tmpVal); 2080 ss++; 2081 } 2082 } /* extrapolated above */ 2083 } /* for all pdGainUsed */ 2084 2085 /* Fill out pdGainBoundaries - only up to 2 allowed here, but hardware allows up to 4 */ 2086 while (i < AR5416_PD_GAINS_IN_MASK) { 2087 pPdGainBoundaries[i] = pPdGainBoundaries[i-1]; 2088 i++; 2089 } 2090 2091 while (k < AR5416_NUM_PDADC_VALUES) { 2092 pPDADCValues[k] = pPDADCValues[k-1]; 2093 k++; 2094 } 2095 return; 2096} 2097 2098/************************************************************** 2099 * getLowerUppderIndex 2100 * 2101 * Return indices surrounding the value in sorted integer lists. 2102 * Requirement: the input list must be monotonically increasing 2103 * and populated up to the list size 2104 * Returns: match is set if an index in the array matches exactly 2105 * or a the target is before or after the range of the array. 2106 */ 2107HAL_BOOL 2108getLowerUpperIndex(uint8_t target, uint8_t *pList, uint16_t listSize, 2109 uint16_t *indexL, uint16_t *indexR) 2110{ 2111 uint16_t i; 2112 2113 /* 2114 * Check first and last elements for beyond ordered array cases. 2115 */ 2116 if (target <= pList[0]) { 2117 *indexL = *indexR = 0; 2118 return AH_TRUE; 2119 } 2120 if (target >= pList[listSize-1]) { 2121 *indexL = *indexR = (uint16_t)(listSize - 1); 2122 return AH_TRUE; 2123 } 2124 2125 /* look for value being near or between 2 values in list */ 2126 for (i = 0; i < listSize - 1; i++) { 2127 /* 2128 * If value is close to the current value of the list 2129 * then target is not between values, it is one of the values 2130 */ 2131 if (pList[i] == target) { 2132 *indexL = *indexR = i; 2133 return AH_TRUE; 2134 } 2135 /* 2136 * Look for value being between current value and next value 2137 * if so return these 2 values 2138 */ 2139 if (target < pList[i + 1]) { 2140 *indexL = i; 2141 *indexR = (uint16_t)(i + 1); 2142 return AH_FALSE; 2143 } 2144 } 2145 HALASSERT(0); 2146 return AH_FALSE; 2147} 2148 2149/************************************************************** 2150 * ar5416FillVpdTable 2151 * 2152 * Fill the Vpdlist for indices Pmax-Pmin 2153 * Note: pwrMin, pwrMax and Vpdlist are all in dBm * 4 2154 */ 2155static HAL_BOOL 2156ar5416FillVpdTable(uint8_t pwrMin, uint8_t pwrMax, uint8_t *pPwrList, 2157 uint8_t *pVpdList, uint16_t numIntercepts, uint8_t *pRetVpdList) 2158{ 2159 uint16_t i, k; 2160 uint8_t currPwr = pwrMin; 2161 uint16_t idxL = 0, idxR = 0; 2162 2163 HALASSERT(pwrMax > pwrMin); 2164 for (i = 0; i <= (pwrMax - pwrMin) / 2; i++) { 2165 getLowerUpperIndex(currPwr, pPwrList, numIntercepts, 2166 &(idxL), &(idxR)); 2167 if (idxR < 1) 2168 idxR = 1; /* extrapolate below */ 2169 if (idxL == numIntercepts - 1) 2170 idxL = (uint16_t)(numIntercepts - 2); /* extrapolate above */ 2171 if (pPwrList[idxL] == pPwrList[idxR]) 2172 k = pVpdList[idxL]; 2173 else 2174 k = (uint16_t)( ((currPwr - pPwrList[idxL]) * pVpdList[idxR] + (pPwrList[idxR] - currPwr) * pVpdList[idxL]) / 2175 (pPwrList[idxR] - pPwrList[idxL]) ); 2176 HALASSERT(k < 256); 2177 pRetVpdList[i] = (uint8_t)k; 2178 currPwr += 2; /* half dB steps */ 2179 } 2180 2181 return AH_TRUE; 2182} 2183 2184/************************************************************************** 2185 * interpolate 2186 * 2187 * Returns signed interpolated or the scaled up interpolated value 2188 */ 2189static int16_t 2190interpolate(uint16_t target, uint16_t srcLeft, uint16_t srcRight, 2191 int16_t targetLeft, int16_t targetRight) 2192{ 2193 int16_t rv; 2194 2195 if (srcRight == srcLeft) { 2196 rv = targetLeft; 2197 } else { 2198 rv = (int16_t)( ((target - srcLeft) * targetRight + 2199 (srcRight - target) * targetLeft) / (srcRight - srcLeft) ); 2200 } 2201 return rv; 2202} 2203 2204static void 2205ar5416Set11nRegs(struct ath_hal *ah, HAL_CHANNEL *chan) 2206{ 2207 uint32_t phymode; 2208 HAL_HT_MACMODE macmode; /* MAC - 20/40 mode */ 2209 2210 if (!IS_CHAN_HT(chan)) 2211 return; 2212 2213 /* Enable 11n HT, 20 MHz */ 2214 phymode = AR_PHY_FC_HT_EN | AR_PHY_FC_SHORT_GI_40 2215 | AR_PHY_FC_SINGLE_HT_LTF1 | AR_PHY_FC_WALSH; 2216 2217 /* Configure baseband for dynamic 20/40 operation */ 2218 if (IS_CHAN_HT40(chan)) { 2219 phymode |= AR_PHY_FC_DYN2040_EN | AR_PHY_FC_SHORT_GI_40; 2220 2221 /* Configure control (primary) channel at +-10MHz */ 2222 if ((chan->channelFlags & CHANNEL_HT40PLUS)) 2223 phymode |= AR_PHY_FC_DYN2040_PRI_CH; 2224#if 0 2225 /* Configure 20/25 spacing */ 2226 if (ht->ht_extprotspacing == HAL_HT_EXTPROTSPACING_25) 2227 phymode |= AR_PHY_FC_DYN2040_EXT_CH; 2228#endif 2229 macmode = HAL_HT_MACMODE_2040; 2230 } else 2231 macmode = HAL_HT_MACMODE_20; 2232 OS_REG_WRITE(ah, AR_PHY_TURBO, phymode); 2233 2234 /* Configure MAC for 20/40 operation */ 2235 ar5416Set11nMac2040(ah, macmode); 2236 2237 /* global transmit timeout (25 TUs default)*/ 2238 /* XXX - put this elsewhere??? */ 2239 OS_REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S) ; 2240 2241 /* carrier sense timeout */ 2242 OS_REG_SET_BIT(ah, AR_GTTM, AR_GTTM_CST_USEC); 2243 OS_REG_WRITE(ah, AR_CST, 1 << AR_CST_TIMEOUT_LIMIT_S); 2244} 2245 2246void 2247ar5416GetChannelCenters(struct ath_hal *ah, 2248 HAL_CHANNEL_INTERNAL *chan, CHAN_CENTERS *centers) 2249{ 2250 centers->ctl_center = chan->channel; 2251 centers->synth_center = chan->channel; 2252 /* 2253 * In 20/40 phy mode, the center frequency is 2254 * "between" the control and extension channels. 2255 */ 2256 if (chan->channelFlags & CHANNEL_HT40PLUS) { 2257 centers->synth_center += HT40_CHANNEL_CENTER_SHIFT; 2258 centers->ext_center = 2259 centers->synth_center + HT40_CHANNEL_CENTER_SHIFT; 2260 } else if (chan->channelFlags & CHANNEL_HT40MINUS) { 2261 centers->synth_center -= HT40_CHANNEL_CENTER_SHIFT; 2262 centers->ext_center = 2263 centers->synth_center - HT40_CHANNEL_CENTER_SHIFT; 2264 } else { 2265 centers->ext_center = chan->channel; 2266 } 2267} 2268