1/* 2 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting 3 * Copyright (c) 2002-2008 Atheros Communications, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 * 17 * $Id: ar5413.c,v 1.4 2013/09/12 12:07:01 martin Exp $ 18 */ 19#include "opt_ah.h" 20 21#include "ah.h" 22#include "ah_internal.h" 23 24#include "ah_eeprom_v3.h" 25 26#include "ar5212/ar5212.h" 27#include "ar5212/ar5212reg.h" 28#include "ar5212/ar5212phy.h" 29 30#define AH_5212_5413 31#include "ar5212/ar5212.ini" 32 33#define N(a) (sizeof(a)/sizeof(a[0])) 34 35struct ar5413State { 36 RF_HAL_FUNCS base; /* public state, must be first */ 37 uint16_t pcdacTable[PWR_TABLE_SIZE_2413]; 38 39 uint32_t Bank1Data[N(ar5212Bank1_5413)]; 40 uint32_t Bank2Data[N(ar5212Bank2_5413)]; 41 uint32_t Bank3Data[N(ar5212Bank3_5413)]; 42 uint32_t Bank6Data[N(ar5212Bank6_5413)]; 43 uint32_t Bank7Data[N(ar5212Bank7_5413)]; 44 45 /* 46 * Private state for reduced stack usage. 47 */ 48 /* filled out Vpd table for all pdGains (chanL) */ 49 uint16_t vpdTable_L[MAX_NUM_PDGAINS_PER_CHANNEL] 50 [MAX_PWR_RANGE_IN_HALF_DB]; 51 /* filled out Vpd table for all pdGains (chanR) */ 52 uint16_t vpdTable_R[MAX_NUM_PDGAINS_PER_CHANNEL] 53 [MAX_PWR_RANGE_IN_HALF_DB]; 54 /* filled out Vpd table for all pdGains (interpolated) */ 55 uint16_t vpdTable_I[MAX_NUM_PDGAINS_PER_CHANNEL] 56 [MAX_PWR_RANGE_IN_HALF_DB]; 57}; 58#define AR5413(ah) ((struct ar5413State *) AH5212(ah)->ah_rfHal) 59 60extern void ar5212ModifyRfBuffer(uint32_t *rfBuf, uint32_t reg32, 61 uint32_t numBits, uint32_t firstBit, uint32_t column); 62 63static void 64ar5413WriteRegs(struct ath_hal *ah, u_int modesIndex, u_int freqIndex, 65 int writes) 66{ 67 HAL_INI_WRITE_ARRAY(ah, ar5212Modes_5413, modesIndex, writes); 68 HAL_INI_WRITE_ARRAY(ah, ar5212Common_5413, 1, writes); 69 HAL_INI_WRITE_ARRAY(ah, ar5212BB_RfGain_5413, freqIndex, writes); 70} 71 72/* 73 * Take the MHz channel value and set the Channel value 74 * 75 * ASSUMES: Writes enabled to analog bus 76 */ 77static HAL_BOOL 78ar5413SetChannel(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan) 79{ 80 uint32_t channelSel = 0; 81 uint32_t bModeSynth = 0; 82 uint32_t aModeRefSel = 0; 83 uint32_t reg32 = 0; 84 uint16_t freq; 85 86 OS_MARK(ah, AH_MARK_SETCHANNEL, chan->channel); 87 88 if (chan->channel < 4800) { 89 uint32_t txctl; 90 91 if (((chan->channel - 2192) % 5) == 0) { 92 channelSel = ((chan->channel - 672) * 2 - 3040)/10; 93 bModeSynth = 0; 94 } else if (((chan->channel - 2224) % 5) == 0) { 95 channelSel = ((chan->channel - 704) * 2 - 3040) / 10; 96 bModeSynth = 1; 97 } else { 98 HALDEBUG(ah, HAL_DEBUG_ANY, 99 "%s: invalid channel %u MHz\n", 100 __func__, chan->channel); 101 return AH_FALSE; 102 } 103 104 channelSel = (channelSel << 2) & 0xff; 105 channelSel = ath_hal_reverseBits(channelSel, 8); 106 107 txctl = OS_REG_READ(ah, AR_PHY_CCK_TX_CTRL); 108 if (chan->channel == 2484) { 109 /* Enable channel spreading for channel 14 */ 110 OS_REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, 111 txctl | AR_PHY_CCK_TX_CTRL_JAPAN); 112 } else { 113 OS_REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, 114 txctl &~ AR_PHY_CCK_TX_CTRL_JAPAN); 115 } 116 } else if (((chan->channel % 5) == 2) && (chan->channel <= 5435)) { 117 freq = chan->channel - 2; /* Align to even 5MHz raster */ 118 channelSel = ath_hal_reverseBits( 119 (uint32_t)(((freq - 4800)*10)/25 + 1), 8); 120 aModeRefSel = ath_hal_reverseBits(0, 2); 121 } else if ((chan->channel % 20) == 0 && chan->channel >= 5120) { 122 channelSel = ath_hal_reverseBits( 123 ((chan->channel - 4800) / 20 << 2), 8); 124 aModeRefSel = ath_hal_reverseBits(1, 2); 125 } else if ((chan->channel % 10) == 0) { 126 channelSel = ath_hal_reverseBits( 127 ((chan->channel - 4800) / 10 << 1), 8); 128 aModeRefSel = ath_hal_reverseBits(1, 2); 129 } else if ((chan->channel % 5) == 0) { 130 channelSel = ath_hal_reverseBits( 131 (chan->channel - 4800) / 5, 8); 132 aModeRefSel = ath_hal_reverseBits(1, 2); 133 } else { 134 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel %u MHz\n", 135 __func__, chan->channel); 136 return AH_FALSE; 137 } 138 139 reg32 = (channelSel << 4) | (aModeRefSel << 2) | (bModeSynth << 1) | 140 (1 << 12) | 0x1; 141 OS_REG_WRITE(ah, AR_PHY(0x27), reg32 & 0xff); 142 143 reg32 >>= 8; 144 OS_REG_WRITE(ah, AR_PHY(0x36), reg32 & 0x7f); 145 146 AH_PRIVATE(ah)->ah_curchan = chan; 147 return AH_TRUE; 148} 149 150/* 151 * Reads EEPROM header info from device structure and programs 152 * all rf registers 153 * 154 * REQUIRES: Access to the analog rf device 155 */ 156static HAL_BOOL 157ar5413SetRfRegs(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, uint16_t modesIndex, uint16_t *rfXpdGain) 158{ 159#define RF_BANK_SETUP(_priv, _ix, _col) do { \ 160 int i; \ 161 for (i = 0; i < N(ar5212Bank##_ix##_5413); i++) \ 162 (_priv)->Bank##_ix##Data[i] = ar5212Bank##_ix##_5413[i][_col];\ 163} while (0) 164 struct ath_hal_5212 *ahp = AH5212(ah); 165 const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; 166 uint16_t ob5GHz = 0, db5GHz = 0; 167 uint16_t ob2GHz = 0, db2GHz = 0; 168 struct ar5413State *priv = AR5413(ah); 169 int regWrites = 0; 170 171 HALDEBUG(ah, HAL_DEBUG_RFPARAM, 172 "%s: chan 0x%x flag 0x%x modesIndex 0x%x\n", 173 __func__, chan->channel, chan->channelFlags, modesIndex); 174 175 HALASSERT(priv != AH_NULL); 176 177 /* Setup rf parameters */ 178 switch (chan->channelFlags & CHANNEL_ALL) { 179 case CHANNEL_A: 180 case CHANNEL_T: 181 if (chan->channel > 4000 && chan->channel < 5260) { 182 ob5GHz = ee->ee_ob1; 183 db5GHz = ee->ee_db1; 184 } else if (chan->channel >= 5260 && chan->channel < 5500) { 185 ob5GHz = ee->ee_ob2; 186 db5GHz = ee->ee_db2; 187 } else if (chan->channel >= 5500 && chan->channel < 5725) { 188 ob5GHz = ee->ee_ob3; 189 db5GHz = ee->ee_db3; 190 } else if (chan->channel >= 5725) { 191 ob5GHz = ee->ee_ob4; 192 db5GHz = ee->ee_db4; 193 } else { 194 /* XXX else */ 195 } 196 break; 197 case CHANNEL_B: 198 ob2GHz = ee->ee_obFor24; 199 db2GHz = ee->ee_dbFor24; 200 break; 201 case CHANNEL_G: 202 case CHANNEL_108G: 203 ob2GHz = ee->ee_obFor24g; 204 db2GHz = ee->ee_dbFor24g; 205 break; 206 default: 207 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid channel flags 0x%x\n", 208 __func__, chan->channelFlags); 209 return AH_FALSE; 210 } 211 212 /* Bank 1 Write */ 213 RF_BANK_SETUP(priv, 1, 1); 214 215 /* Bank 2 Write */ 216 RF_BANK_SETUP(priv, 2, modesIndex); 217 218 /* Bank 3 Write */ 219 RF_BANK_SETUP(priv, 3, modesIndex); 220 221 /* Bank 6 Write */ 222 RF_BANK_SETUP(priv, 6, modesIndex); 223 224 /* Only the 5 or 2 GHz OB/DB need to be set for a mode */ 225 if (IS_CHAN_2GHZ(chan)) { 226 ar5212ModifyRfBuffer(priv->Bank6Data, ob2GHz, 3, 241, 0); 227 ar5212ModifyRfBuffer(priv->Bank6Data, db2GHz, 3, 238, 0); 228 229 /* TODO - only for Eagle 1.0 2GHz - remove for production */ 230 /* XXX: but without this bit G doesn't work. */ 231 ar5212ModifyRfBuffer(priv->Bank6Data, 1 , 1, 291, 2); 232 233 /* Optimum value for rf_pwd_iclobuf2G for PCIe chips only */ 234 if (AH_PRIVATE(ah)->ah_ispcie) { 235 ar5212ModifyRfBuffer(priv->Bank6Data, ath_hal_reverseBits(6, 3), 236 3, 131, 3); 237 } 238 } else { 239 ar5212ModifyRfBuffer(priv->Bank6Data, ob5GHz, 3, 247, 0); 240 ar5212ModifyRfBuffer(priv->Bank6Data, db5GHz, 3, 244, 0); 241 242 } 243 244 /* Bank 7 Setup */ 245 RF_BANK_SETUP(priv, 7, modesIndex); 246 247 /* Write Analog registers */ 248 HAL_INI_WRITE_BANK(ah, ar5212Bank1_5413, priv->Bank1Data, regWrites); 249 HAL_INI_WRITE_BANK(ah, ar5212Bank2_5413, priv->Bank2Data, regWrites); 250 HAL_INI_WRITE_BANK(ah, ar5212Bank3_5413, priv->Bank3Data, regWrites); 251 HAL_INI_WRITE_BANK(ah, ar5212Bank6_5413, priv->Bank6Data, regWrites); 252 HAL_INI_WRITE_BANK(ah, ar5212Bank7_5413, priv->Bank7Data, regWrites); 253 254 /* Now that we have reprogrammed rfgain value, clear the flag. */ 255 ahp->ah_rfgainState = HAL_RFGAIN_INACTIVE; 256 257 return AH_TRUE; 258#undef RF_BANK_SETUP 259} 260 261/* 262 * Return a reference to the requested RF Bank. 263 */ 264static uint32_t * 265ar5413GetRfBank(struct ath_hal *ah, int bank) 266{ 267 struct ar5413State *priv = AR5413(ah); 268 269 HALASSERT(priv != AH_NULL); 270 switch (bank) { 271 case 1: return priv->Bank1Data; 272 case 2: return priv->Bank2Data; 273 case 3: return priv->Bank3Data; 274 case 6: return priv->Bank6Data; 275 case 7: return priv->Bank7Data; 276 } 277 HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unknown RF Bank %d requested\n", 278 __func__, bank); 279 return AH_NULL; 280} 281 282/* 283 * Return indices surrounding the value in sorted integer lists. 284 * 285 * NB: the input list is assumed to be sorted in ascending order 286 */ 287static void 288GetLowerUpperIndex(int16_t v, const uint16_t *lp, uint16_t listSize, 289 uint32_t *vlo, uint32_t *vhi) 290{ 291 int16_t target = v; 292 const uint16_t *ep = lp+listSize; 293 const uint16_t *tp; 294 295 /* 296 * Check first and last elements for out-of-bounds conditions. 297 */ 298 if (target < lp[0]) { 299 *vlo = *vhi = 0; 300 return; 301 } 302 if (target >= ep[-1]) { 303 *vlo = *vhi = listSize - 1; 304 return; 305 } 306 307 /* look for value being near or between 2 values in list */ 308 for (tp = lp; tp < ep; tp++) { 309 /* 310 * If value is close to the current value of the list 311 * then target is not between values, it is one of the values 312 */ 313 if (*tp == target) { 314 *vlo = *vhi = tp - (const uint16_t *) lp; 315 return; 316 } 317 /* 318 * Look for value being between current value and next value 319 * if so return these 2 values 320 */ 321 if (target < tp[1]) { 322 *vlo = tp - (const uint16_t *) lp; 323 *vhi = *vlo + 1; 324 return; 325 } 326 } 327} 328 329/* 330 * Fill the Vpdlist for indices Pmax-Pmin 331 */ 332static HAL_BOOL 333ar5413FillVpdTable(uint32_t pdGainIdx, int16_t Pmin, int16_t Pmax, 334 const int16_t *pwrList, const uint16_t *VpdList, 335 uint16_t numIntercepts, 336 uint16_t retVpdList[][64]) 337{ 338 uint16_t ii, kk; 339 int16_t currPwr = (int16_t)(2*Pmin); 340 /* since Pmin is pwr*2 and pwrList is 4*pwr */ 341 uint32_t idxL = 0, idxR = 0; 342 343 ii = 0; 344 345 if (numIntercepts < 2) 346 return AH_FALSE; 347 348 while (ii <= (uint16_t)(Pmax - Pmin)) { 349 GetLowerUpperIndex(currPwr, (const uint16_t *) pwrList, 350 numIntercepts, &(idxL), &(idxR)); 351 if (idxR < 1) 352 idxR = 1; /* extrapolate below */ 353 if (idxL == (uint32_t)(numIntercepts - 1)) 354 idxL = numIntercepts - 2; /* extrapolate above */ 355 if (pwrList[idxL] == pwrList[idxR]) 356 kk = VpdList[idxL]; 357 else 358 kk = (uint16_t) 359 (((currPwr - pwrList[idxL])*VpdList[idxR]+ 360 (pwrList[idxR] - currPwr)*VpdList[idxL])/ 361 (pwrList[idxR] - pwrList[idxL])); 362 retVpdList[pdGainIdx][ii] = kk; 363 ii++; 364 currPwr += 2; /* half dB steps */ 365 } 366 367 return AH_TRUE; 368} 369 370/* 371 * Returns interpolated or the scaled up interpolated value 372 */ 373static int16_t 374interpolate_signed(uint16_t target, uint16_t srcLeft, uint16_t srcRight, 375 int16_t targetLeft, int16_t targetRight) 376{ 377 int16_t rv; 378 379 if (srcRight != srcLeft) { 380 rv = ((target - srcLeft)*targetRight + 381 (srcRight - target)*targetLeft) / (srcRight - srcLeft); 382 } else { 383 rv = targetLeft; 384 } 385 return rv; 386} 387 388/* 389 * Uses the data points read from EEPROM to reconstruct the pdadc power table 390 * Called by ar5413SetPowerTable() 391 */ 392static int 393ar5413getGainBoundariesAndPdadcsForPowers(struct ath_hal *ah, uint16_t channel, 394 const RAW_DATA_STRUCT_2413 *pRawDataset, 395 uint16_t pdGainOverlap_t2, 396 int16_t *pMinCalPower, uint16_t pPdGainBoundaries[], 397 uint16_t pPdGainValues[], uint16_t pPDADCValues[]) 398{ 399 struct ar5413State *priv = AR5413(ah); 400#define VpdTable_L priv->vpdTable_L 401#define VpdTable_R priv->vpdTable_R 402#define VpdTable_I priv->vpdTable_I 403 uint32_t ii, jj, kk; 404 int32_t ss;/* potentially -ve index for taking care of pdGainOverlap */ 405 uint32_t idxL = 0, idxR = 0; 406 uint32_t numPdGainsUsed = 0; 407 /* 408 * If desired to support -ve power levels in future, just 409 * change pwr_I_0 to signed 5-bits. 410 */ 411 int16_t Pmin_t2[MAX_NUM_PDGAINS_PER_CHANNEL]; 412 /* to accomodate -ve power levels later on. */ 413 int16_t Pmax_t2[MAX_NUM_PDGAINS_PER_CHANNEL]; 414 /* to accomodate -ve power levels later on */ 415 uint16_t numVpd = 0; 416 uint16_t Vpd_step; 417 int16_t tmpVal ; 418 uint32_t sizeCurrVpdTable, maxIndex, tgtIndex; 419 420 /* Get upper lower index */ 421 GetLowerUpperIndex(channel, pRawDataset->pChannels, 422 pRawDataset->numChannels, &(idxL), &(idxR)); 423 424 for (ii = 0; ii < MAX_NUM_PDGAINS_PER_CHANNEL; ii++) { 425 jj = MAX_NUM_PDGAINS_PER_CHANNEL - ii - 1; 426 /* work backwards 'cause highest pdGain for lowest power */ 427 numVpd = pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].numVpd; 428 if (numVpd > 0) { 429 pPdGainValues[numPdGainsUsed] = pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].pd_gain; 430 Pmin_t2[numPdGainsUsed] = pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].pwr_t4[0]; 431 if (Pmin_t2[numPdGainsUsed] >pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[0]) { 432 Pmin_t2[numPdGainsUsed] = pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[0]; 433 } 434 Pmin_t2[numPdGainsUsed] = (int16_t) 435 (Pmin_t2[numPdGainsUsed] / 2); 436 Pmax_t2[numPdGainsUsed] = pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].pwr_t4[numVpd-1]; 437 if (Pmax_t2[numPdGainsUsed] > pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[numVpd-1]) 438 Pmax_t2[numPdGainsUsed] = 439 pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[numVpd-1]; 440 Pmax_t2[numPdGainsUsed] = (int16_t)(Pmax_t2[numPdGainsUsed] / 2); 441 ar5413FillVpdTable( 442 numPdGainsUsed, Pmin_t2[numPdGainsUsed], Pmax_t2[numPdGainsUsed], 443 &(pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].pwr_t4[0]), 444 &(pRawDataset->pDataPerChannel[idxL].pDataPerPDGain[jj].Vpd[0]), numVpd, VpdTable_L 445 ); 446 ar5413FillVpdTable( 447 numPdGainsUsed, Pmin_t2[numPdGainsUsed], Pmax_t2[numPdGainsUsed], 448 &(pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].pwr_t4[0]), 449 &(pRawDataset->pDataPerChannel[idxR].pDataPerPDGain[jj].Vpd[0]), numVpd, VpdTable_R 450 ); 451 for (kk = 0; kk < (uint16_t)(Pmax_t2[numPdGainsUsed] - Pmin_t2[numPdGainsUsed]); kk++) { 452 VpdTable_I[numPdGainsUsed][kk] = 453 interpolate_signed( 454 channel, pRawDataset->pChannels[idxL], pRawDataset->pChannels[idxR], 455 (int16_t)VpdTable_L[numPdGainsUsed][kk], (int16_t)VpdTable_R[numPdGainsUsed][kk]); 456 } 457 /* fill VpdTable_I for this pdGain */ 458 numPdGainsUsed++; 459 } 460 /* if this pdGain is used */ 461 } 462 463 *pMinCalPower = Pmin_t2[0]; 464 kk = 0; /* index for the final table */ 465 for (ii = 0; ii < numPdGainsUsed; ii++) { 466 if (ii == (numPdGainsUsed - 1)) 467 pPdGainBoundaries[ii] = Pmax_t2[ii] + 468 PD_GAIN_BOUNDARY_STRETCH_IN_HALF_DB; 469 else 470 pPdGainBoundaries[ii] = (uint16_t) 471 ((Pmax_t2[ii] + Pmin_t2[ii+1]) / 2 ); 472 if (pPdGainBoundaries[ii] > 63) { 473 HALDEBUG(ah, HAL_DEBUG_ANY, 474 "%s: clamp pPdGainBoundaries[%d] %d\n", 475 __func__, ii, pPdGainBoundaries[ii]);/*XXX*/ 476 pPdGainBoundaries[ii] = 63; 477 } 478 479 /* Find starting index for this pdGain */ 480 if (ii == 0) 481 ss = 0; /* for the first pdGain, start from index 0 */ 482 else 483 ss = (pPdGainBoundaries[ii-1] - Pmin_t2[ii]) - 484 pdGainOverlap_t2; 485 Vpd_step = (uint16_t)(VpdTable_I[ii][1] - VpdTable_I[ii][0]); 486 Vpd_step = (uint16_t)((Vpd_step < 1) ? 1 : Vpd_step); 487 /* 488 *-ve ss indicates need to extrapolate data below for this pdGain 489 */ 490 while (ss < 0) { 491 tmpVal = (int16_t)(VpdTable_I[ii][0] + ss*Vpd_step); 492 pPDADCValues[kk++] = (uint16_t)((tmpVal < 0) ? 0 : tmpVal); 493 ss++; 494 } 495 496 sizeCurrVpdTable = Pmax_t2[ii] - Pmin_t2[ii]; 497 tgtIndex = pPdGainBoundaries[ii] + pdGainOverlap_t2 - Pmin_t2[ii]; 498 maxIndex = (tgtIndex < sizeCurrVpdTable) ? tgtIndex : sizeCurrVpdTable; 499 500 while (ss < (int16_t)maxIndex) 501 pPDADCValues[kk++] = VpdTable_I[ii][ss++]; 502 503 Vpd_step = (uint16_t)(VpdTable_I[ii][sizeCurrVpdTable-1] - 504 VpdTable_I[ii][sizeCurrVpdTable-2]); 505 Vpd_step = (uint16_t)((Vpd_step < 1) ? 1 : Vpd_step); 506 /* 507 * for last gain, pdGainBoundary == Pmax_t2, so will 508 * have to extrapolate 509 */ 510 if (tgtIndex > maxIndex) { /* need to extrapolate above */ 511 while(ss < (int16_t)tgtIndex) { 512 tmpVal = (uint16_t) 513 (VpdTable_I[ii][sizeCurrVpdTable-1] + 514 (ss-maxIndex)*Vpd_step); 515 pPDADCValues[kk++] = (tmpVal > 127) ? 516 127 : tmpVal; 517 ss++; 518 } 519 } /* extrapolated above */ 520 } /* for all pdGainUsed */ 521 522 while (ii < MAX_NUM_PDGAINS_PER_CHANNEL) { 523 pPdGainBoundaries[ii] = pPdGainBoundaries[ii-1]; 524 ii++; 525 } 526 while (kk < 128) { 527 pPDADCValues[kk] = pPDADCValues[kk-1]; 528 kk++; 529 } 530 531 return numPdGainsUsed; 532#undef VpdTable_L 533#undef VpdTable_R 534#undef VpdTable_I 535} 536 537static HAL_BOOL 538ar5413SetPowerTable(struct ath_hal *ah, 539 int16_t *minPower, int16_t *maxPower, HAL_CHANNEL_INTERNAL *chan, 540 uint16_t *rfXpdGain) 541{ 542 struct ath_hal_5212 *ahp = AH5212(ah); 543 const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; 544 const RAW_DATA_STRUCT_2413 *pRawDataset = AH_NULL; 545 uint16_t pdGainOverlap_t2; 546 int16_t minCalPower5413_t2; 547 uint16_t *pdadcValues = ahp->ah_pcdacTable; 548 uint16_t gainBoundaries[4]; 549 uint32_t reg32, regoffset; 550 int i, numPdGainsUsed; 551#ifndef AH_USE_INIPDGAIN 552 uint32_t tpcrg1; 553#endif 554 555 HALDEBUG(ah, HAL_DEBUG_RFPARAM, "%s: chan 0x%x flag 0x%x\n", 556 __func__, chan->channel,chan->channelFlags); 557 558 if (IS_CHAN_G(chan) || IS_CHAN_108G(chan)) 559 pRawDataset = &ee->ee_rawDataset2413[headerInfo11G]; 560 else if (IS_CHAN_B(chan)) 561 pRawDataset = &ee->ee_rawDataset2413[headerInfo11B]; 562 else { 563 HALASSERT(IS_CHAN_5GHZ(chan)); 564 pRawDataset = &ee->ee_rawDataset2413[headerInfo11A]; 565 } 566 567 pdGainOverlap_t2 = (uint16_t) SM(OS_REG_READ(ah, AR_PHY_TPCRG5), 568 AR_PHY_TPCRG5_PD_GAIN_OVERLAP); 569 570 numPdGainsUsed = ar5413getGainBoundariesAndPdadcsForPowers(ah, 571 chan->channel, pRawDataset, pdGainOverlap_t2, 572 &minCalPower5413_t2,gainBoundaries, rfXpdGain, pdadcValues); 573 HALASSERT(1 <= numPdGainsUsed && numPdGainsUsed <= 3); 574 575#ifdef AH_USE_INIPDGAIN 576 /* 577 * Use pd_gains curve from eeprom; Atheros always uses 578 * the default curve from the ini file but some vendors 579 * (e.g. Zcomax) want to override this curve and not 580 * honoring their settings results in tx power 5dBm low. 581 */ 582 OS_REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN, 583 (pRawDataset->pDataPerChannel[0].numPdGains - 1)); 584#else 585 tpcrg1 = OS_REG_READ(ah, AR_PHY_TPCRG1); 586 tpcrg1 = (tpcrg1 &~ AR_PHY_TPCRG1_NUM_PD_GAIN) 587 | SM(numPdGainsUsed-1, AR_PHY_TPCRG1_NUM_PD_GAIN); 588 switch (numPdGainsUsed) { 589 case 3: 590 tpcrg1 &= ~AR_PHY_TPCRG1_PDGAIN_SETTING3; 591 tpcrg1 |= SM(rfXpdGain[2], AR_PHY_TPCRG1_PDGAIN_SETTING3); 592 /* fall thru... */ 593 case 2: 594 tpcrg1 &= ~AR_PHY_TPCRG1_PDGAIN_SETTING2; 595 tpcrg1 |= SM(rfXpdGain[1], AR_PHY_TPCRG1_PDGAIN_SETTING2); 596 /* fall thru... */ 597 case 1: 598 tpcrg1 &= ~AR_PHY_TPCRG1_PDGAIN_SETTING1; 599 tpcrg1 |= SM(rfXpdGain[0], AR_PHY_TPCRG1_PDGAIN_SETTING1); 600 break; 601 } 602#ifdef AH_DEBUG 603 if (tpcrg1 != OS_REG_READ(ah, AR_PHY_TPCRG1)) 604 HALDEBUG(ah, HAL_DEBUG_RFPARAM, "%s: using non-default " 605 "pd_gains (default 0x%x, calculated 0x%x)\n", 606 __func__, OS_REG_READ(ah, AR_PHY_TPCRG1), tpcrg1); 607#endif 608 OS_REG_WRITE(ah, AR_PHY_TPCRG1, tpcrg1); 609#endif 610 611 /* 612 * Note the pdadc table may not start at 0 dBm power, could be 613 * negative or greater than 0. Need to offset the power 614 * values by the amount of minPower for griffin 615 */ 616 if (minCalPower5413_t2 != 0) 617 ahp->ah_txPowerIndexOffset = (int16_t)(0 - minCalPower5413_t2); 618 else 619 ahp->ah_txPowerIndexOffset = 0; 620 621 /* Finally, write the power values into the baseband power table */ 622 regoffset = 0x9800 + (672 <<2); /* beginning of pdadc table in griffin */ 623 for (i = 0; i < 32; i++) { 624 reg32 = ((pdadcValues[4*i + 0] & 0xFF) << 0) | 625 ((pdadcValues[4*i + 1] & 0xFF) << 8) | 626 ((pdadcValues[4*i + 2] & 0xFF) << 16) | 627 ((pdadcValues[4*i + 3] & 0xFF) << 24) ; 628 OS_REG_WRITE(ah, regoffset, reg32); 629 regoffset += 4; 630 } 631 632 OS_REG_WRITE(ah, AR_PHY_TPCRG5, 633 SM(pdGainOverlap_t2, AR_PHY_TPCRG5_PD_GAIN_OVERLAP) | 634 SM(gainBoundaries[0], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1) | 635 SM(gainBoundaries[1], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2) | 636 SM(gainBoundaries[2], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3) | 637 SM(gainBoundaries[3], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4)); 638 639 return AH_TRUE; 640} 641 642static int16_t 643ar5413GetMinPower(struct ath_hal *ah, const RAW_DATA_PER_CHANNEL_2413 *data) 644{ 645 uint32_t ii,jj; 646 uint16_t Pmin=0,numVpd; 647 648 for (ii = 0; ii < MAX_NUM_PDGAINS_PER_CHANNEL; ii++) { 649 jj = MAX_NUM_PDGAINS_PER_CHANNEL - ii - 1; 650 /* work backwards 'cause highest pdGain for lowest power */ 651 numVpd = data->pDataPerPDGain[jj].numVpd; 652 if (numVpd > 0) { 653 Pmin = data->pDataPerPDGain[jj].pwr_t4[0]; 654 return(Pmin); 655 } 656 } 657 return(Pmin); 658} 659 660static int16_t 661ar5413GetMaxPower(struct ath_hal *ah, const RAW_DATA_PER_CHANNEL_2413 *data) 662{ 663 uint32_t ii; 664 uint16_t Pmax=0,numVpd; 665 666 for (ii=0; ii< MAX_NUM_PDGAINS_PER_CHANNEL; ii++) { 667 /* work forwards cuase lowest pdGain for highest power */ 668 numVpd = data->pDataPerPDGain[ii].numVpd; 669 if (numVpd > 0) { 670 Pmax = data->pDataPerPDGain[ii].pwr_t4[numVpd-1]; 671 return(Pmax); 672 } 673 } 674 return(Pmax); 675} 676 677static HAL_BOOL 678ar5413GetChannelMaxMinPower(struct ath_hal *ah, HAL_CHANNEL *chan, 679 int16_t *maxPow, int16_t *minPow) 680{ 681 const HAL_EEPROM *ee = AH_PRIVATE(ah)->ah_eeprom; 682 const RAW_DATA_STRUCT_2413 *pRawDataset = AH_NULL; 683 const RAW_DATA_PER_CHANNEL_2413 *data=AH_NULL; 684 uint16_t numChannels; 685 int totalD,totalF, totalMin,last, i; 686 687 *maxPow = 0; 688 689 if (IS_CHAN_G(chan) || IS_CHAN_108G(chan)) 690 pRawDataset = &ee->ee_rawDataset2413[headerInfo11G]; 691 else if (IS_CHAN_B(chan)) 692 pRawDataset = &ee->ee_rawDataset2413[headerInfo11B]; 693 else { 694 HALASSERT(IS_CHAN_5GHZ(chan)); 695 pRawDataset = &ee->ee_rawDataset2413[headerInfo11A]; 696 } 697 698 numChannels = pRawDataset->numChannels; 699 data = pRawDataset->pDataPerChannel; 700 701 /* Make sure the channel is in the range of the TP values 702 * (freq piers) 703 */ 704 if (numChannels < 1) 705 return(AH_FALSE); 706 707 if ((chan->channel < data[0].channelValue) || 708 (chan->channel > data[numChannels-1].channelValue)) { 709 if (chan->channel < data[0].channelValue) { 710 *maxPow = ar5413GetMaxPower(ah, &data[0]); 711 *minPow = ar5413GetMinPower(ah, &data[0]); 712 return(AH_TRUE); 713 } else { 714 *maxPow = ar5413GetMaxPower(ah, &data[numChannels - 1]); 715 *minPow = ar5413GetMinPower(ah, &data[numChannels - 1]); 716 return(AH_TRUE); 717 } 718 } 719 720 /* Linearly interpolate the power value now */ 721 for (last=0,i=0; (i<numChannels) && (chan->channel > data[i].channelValue); 722 last = i++); 723 totalD = data[i].channelValue - data[last].channelValue; 724 if (totalD > 0) { 725 totalF = ar5413GetMaxPower(ah, &data[i]) - ar5413GetMaxPower(ah, &data[last]); 726 *maxPow = (int8_t) ((totalF*(chan->channel-data[last].channelValue) + 727 ar5413GetMaxPower(ah, &data[last])*totalD)/totalD); 728 totalMin = ar5413GetMinPower(ah, &data[i]) - ar5413GetMinPower(ah, &data[last]); 729 *minPow = (int8_t) ((totalMin*(chan->channel-data[last].channelValue) + 730 ar5413GetMinPower(ah, &data[last])*totalD)/totalD); 731 return(AH_TRUE); 732 } else { 733 if (chan->channel == data[i].channelValue) { 734 *maxPow = ar5413GetMaxPower(ah, &data[i]); 735 *minPow = ar5413GetMinPower(ah, &data[i]); 736 return(AH_TRUE); 737 } else 738 return(AH_FALSE); 739 } 740} 741 742/* 743 * Free memory for analog bank scratch buffers 744 */ 745static void 746ar5413RfDetach(struct ath_hal *ah) 747{ 748 struct ath_hal_5212 *ahp = AH5212(ah); 749 750 HALASSERT(ahp->ah_rfHal != AH_NULL); 751 ath_hal_free(ahp->ah_rfHal); 752 ahp->ah_rfHal = AH_NULL; 753} 754 755/* 756 * Allocate memory for analog bank scratch buffers 757 * Scratch Buffer will be reinitialized every reset so no need to zero now 758 */ 759static HAL_BOOL 760ar5413RfAttach(struct ath_hal *ah, HAL_STATUS *status) 761{ 762 struct ath_hal_5212 *ahp = AH5212(ah); 763 struct ar5413State *priv; 764 765 HALASSERT(ah->ah_magic == AR5212_MAGIC); 766 767 HALASSERT(ahp->ah_rfHal == AH_NULL); 768 priv = ath_hal_malloc(sizeof(struct ar5413State)); 769 if (priv == AH_NULL) { 770 HALDEBUG(ah, HAL_DEBUG_ANY, 771 "%s: cannot allocate private state\n", __func__); 772 *status = HAL_ENOMEM; /* XXX */ 773 return AH_FALSE; 774 } 775 priv->base.rfDetach = ar5413RfDetach; 776 priv->base.writeRegs = ar5413WriteRegs; 777 priv->base.getRfBank = ar5413GetRfBank; 778 priv->base.setChannel = ar5413SetChannel; 779 priv->base.setRfRegs = ar5413SetRfRegs; 780 priv->base.setPowerTable = ar5413SetPowerTable; 781 priv->base.getChannelMaxMinPower = ar5413GetChannelMaxMinPower; 782 priv->base.getNfAdjust = ar5212GetNfAdjust; 783 784 ahp->ah_pcdacTable = priv->pcdacTable; 785 ahp->ah_pcdacTableSize = sizeof(priv->pcdacTable); 786 ahp->ah_rfHal = &priv->base; 787 788 return AH_TRUE; 789} 790 791static HAL_BOOL 792ar5413Probe(struct ath_hal *ah) 793{ 794 return IS_5413(ah); 795} 796AH_RF(RF5413, ar5413Probe, ar5413RfAttach); 797