1/* $NetBSD: st_scsi.c,v 1.36 2014/10/18 08:33:28 snj Exp $ */ 2 3/*- 4 * Copyright (c) 1998, 2004 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32/* 33 * Originally written by Julian Elischer (julian@tfs.com) 34 * for TRW Financial Systems for use under the MACH(2.5) operating system. 35 * 36 * TRW Financial Systems, in accordance with their agreement with Carnegie 37 * Mellon University, makes this software available to CMU to distribute 38 * or use in any manner that they see fit as long as this message is kept with 39 * the software. For this reason TFS also grants any other persons or 40 * organisations permission to use or modify this software. 41 * 42 * TFS supplies this software to be publicly redistributed 43 * on the understanding that TFS is not responsible for the correct 44 * functioning of this software in any circumstances. 45 * 46 * Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992 47 * major changes by Julian Elischer (julian@jules.dialix.oz.au) May 1993 48 * 49 * A lot of rewhacking done by mjacob (mjacob@nas.nasa.gov). 50 */ 51 52#include <sys/cdefs.h> 53__KERNEL_RCSID(0, "$NetBSD: st_scsi.c,v 1.36 2014/10/18 08:33:28 snj Exp $"); 54 55#ifdef _KERNEL_OPT 56#include "opt_scsi.h" 57#endif 58 59#include <sys/param.h> 60#include <sys/device.h> 61#include <sys/buf.h> 62#include <sys/bufq.h> 63#include <sys/conf.h> 64#include <sys/kernel.h> 65#include <sys/systm.h> 66 67#include <dev/scsipi/scsi_all.h> 68#include <dev/scsipi/scsi_tape.h> 69#include <dev/scsipi/stvar.h> 70 71static int st_scsibus_match(device_t, cfdata_t, void *); 72static void st_scsibus_attach(device_t, device_t, void *); 73static int st_scsibus_ops(struct st_softc *, int, int); 74static int st_scsibus_read_block_limits(struct st_softc *, int); 75static int st_scsibus_mode_sense(struct st_softc *, int); 76static int st_scsibus_cmprss(struct st_softc *, int, int); 77 78CFATTACH_DECL_NEW( 79 st_scsibus, 80 sizeof(struct st_softc), 81 st_scsibus_match, 82 st_scsibus_attach, 83 stdetach, 84 NULL 85); 86 87static const struct scsipi_inquiry_pattern st_scsibus_patterns[] = { 88 {T_SEQUENTIAL, T_REMOV, 89 "", "", ""}, 90}; 91 92static int 93st_scsibus_match(device_t parent, cfdata_t match, void *aux) 94{ 95 struct scsipibus_attach_args *sa = aux; 96 int priority; 97 98 if (SCSIPI_BUSTYPE_TYPE(scsipi_periph_bustype(sa->sa_periph)) != 99 SCSIPI_BUSTYPE_SCSI) 100 return 0; 101 102 (void)scsipi_inqmatch(&sa->sa_inqbuf, 103 st_scsibus_patterns, 104 sizeof(st_scsibus_patterns)/sizeof(st_scsibus_patterns[0]), 105 sizeof(st_scsibus_patterns[0]), &priority); 106 return priority; 107} 108 109static void 110st_scsibus_attach(device_t parent, device_t self, void *aux) 111{ 112 struct st_softc *st = device_private(self); 113 114 st->ops = st_scsibus_ops; 115 stattach(parent, self, aux); 116} 117 118static int 119st_scsibus_ops(struct st_softc *st, int op, int flags) 120{ 121 switch(op) { 122 case ST_OPS_RBL: 123 return st_scsibus_read_block_limits(st, flags); 124 case ST_OPS_MODESENSE: 125 return st_scsibus_mode_sense(st, flags); 126 case ST_OPS_MODESELECT: 127 return st_mode_select(st, flags); 128 case ST_OPS_CMPRSS_ON: 129 case ST_OPS_CMPRSS_OFF: 130 return st_scsibus_cmprss(st, flags, 131 (op == ST_OPS_CMPRSS_ON) ? 1 : 0); 132 default: 133 panic("st_scsibus_ops: invalid op"); 134 return 0; /* XXX to appease gcc */ 135 } 136 /* NOTREACHED */ 137} 138 139/* 140 * Ask the drive what its min and max blk sizes are. 141 */ 142static int 143st_scsibus_read_block_limits(struct st_softc *st, int flags) 144{ 145 struct scsi_block_limits cmd; 146 struct scsi_block_limits_data block_limits; 147 struct scsipi_periph *periph = st->sc_periph; 148 int error; 149 150 /* do a 'Read Block Limits' */ 151 memset(&cmd, 0, sizeof(cmd)); 152 cmd.opcode = READ_BLOCK_LIMITS; 153 154 /* do the command, update the global values */ 155 error = scsipi_command(periph, (void *)&cmd, sizeof(cmd), 156 (void *)&block_limits, sizeof(block_limits), 157 ST_RETRIES, ST_CTL_TIME, NULL, flags | XS_CTL_DATA_IN); 158 if (error) 159 return error; 160 161 st->blkmin = _2btol(block_limits.min_length); 162 st->blkmax = _3btol(block_limits.max_length); 163 164 SC_DEBUG(periph, SCSIPI_DB3, 165 ("(%d <= blksize <= %d)\n", st->blkmin, st->blkmax)); 166 return 0; 167} 168 169/* 170 * Get the scsi driver to send a full inquiry to the 171 * device and use the results to fill out the global 172 * parameter structure. 173 * 174 * called from: 175 * attach 176 * open 177 * ioctl (to reset original blksize) 178 */ 179static int 180st_scsibus_mode_sense(struct st_softc *st, int flags) 181{ 182 u_int scsipi_sense_len; 183 int error; 184 struct scsipi_sense { 185 struct scsi_mode_parameter_header_6 header; 186 struct scsi_general_block_descriptor blk_desc; 187 u_char sense_data[MAX_PAGE_0_SIZE]; 188 } scsipi_sense; 189 struct scsipi_periph *periph = st->sc_periph; 190 191 scsipi_sense_len = sizeof(scsipi_sense.header) + 192 sizeof(scsipi_sense.blk_desc) + 193 st->page_0_size; 194 195 /* 196 * Set up a mode sense 197 * We don't need the results. Just print them for our interest's sake, 198 * if asked, or if we need it as a template for the mode select store 199 * it away. 200 */ 201 error = scsipi_mode_sense(st->sc_periph, 0, SMS_PCTRL_CURRENT, 202 &scsipi_sense.header, scsipi_sense_len, flags, 203 ST_RETRIES, ST_CTL_TIME); 204 if (error) 205 return error; 206 207 st->numblks = _3btol(scsipi_sense.blk_desc.nblocks); 208 st->media_blksize = _3btol(scsipi_sense.blk_desc.blklen); 209 st->media_density = scsipi_sense.blk_desc.density; 210 if (scsipi_sense.header.dev_spec & SMH_DSP_WRITE_PROT) 211 st->flags |= ST_READONLY; 212 else 213 st->flags &= ~ST_READONLY; 214 SC_DEBUG(periph, SCSIPI_DB3, 215 ("density code %d, %d-byte blocks, write-%s, ", 216 st->media_density, st->media_blksize, 217 st->flags & ST_READONLY ? "protected" : "enabled")); 218 SC_DEBUG(periph, SCSIPI_DB3, 219 ("%sbuffered\n", 220 scsipi_sense.header.dev_spec & SMH_DSP_BUFF_MODE ? "" : "un")); 221 if (st->page_0_size) 222 memcpy(st->sense_data, scsipi_sense.sense_data, 223 st->page_0_size); 224 periph->periph_flags |= PERIPH_MEDIA_LOADED; 225 return 0; 226} 227 228static int 229st_scsibus_cmprss(struct st_softc *st, int flags, int onoff) 230{ 231 u_int scsi_dlen; 232 int byte2, page; 233 struct scsi_select { 234 struct scsi_mode_parameter_header_6 header; 235 struct scsi_general_block_descriptor blk_desc; 236 u_char pdata[MAX(sizeof(struct scsi_tape_dev_conf_page), 237 sizeof(struct scsi_tape_dev_compression_page))]; 238 } scsi_pdata; 239 struct scsi_tape_dev_conf_page *ptr; 240 struct scsi_tape_dev_compression_page *cptr; 241 struct scsipi_periph *periph = st->sc_periph; 242 int error, ison; 243 244 scsi_dlen = sizeof(scsi_pdata); 245 /* Do DATA COMPRESSION page first. */ 246 page = SMS_PCTRL_CURRENT | 0xf; 247 byte2 = 0; 248 249 /* Do the MODE SENSE command... */ 250again: 251 memset(&scsi_pdata, 0, scsi_dlen); 252 error = scsipi_mode_sense(periph, byte2, page, 253 &scsi_pdata.header, scsi_dlen, flags, ST_RETRIES, ST_CTL_TIME); 254 255 if (error) { 256 if (byte2 != SMS_DBD) { 257 byte2 = SMS_DBD; 258 goto again; 259 } 260 /* Try a different page? */ 261 if (page == (SMS_PCTRL_CURRENT | 0xf)) { 262 page = SMS_PCTRL_CURRENT | 0x10; 263 byte2 = 0; 264 goto again; 265 } 266 return error; 267 } 268 269 if (scsi_pdata.header.blk_desc_len) 270 ptr = (struct scsi_tape_dev_conf_page *) scsi_pdata.pdata; 271 else 272 ptr = (struct scsi_tape_dev_conf_page *) &scsi_pdata.blk_desc; 273 274 if ((page & SMS_PAGE_MASK) == 0xf) { 275 cptr = (struct scsi_tape_dev_compression_page *) ptr; 276 ison = (cptr->dce_dcc & DCP_DCE) != 0; 277 if (onoff) 278 cptr->dce_dcc |= DCP_DCE; 279 else 280 cptr->dce_dcc &= ~DCP_DCE; 281 cptr->pagecode &= ~0x80; 282 } else { 283 ison = (ptr->sel_comp_alg != 0); 284 if (onoff) 285 ptr->sel_comp_alg = 1; 286 else 287 ptr->sel_comp_alg = 0; 288 ptr->pagecode &= ~0x80; 289 ptr->byte2 = 0; 290 ptr->active_partition = 0; 291 ptr->wb_full_ratio = 0; 292 ptr->rb_empty_ratio = 0; 293 ptr->byte8 &= ~0x30; 294 ptr->gap_size = 0; 295 ptr->byte10 &= ~0xe7; 296 ptr->ew_bufsize[0] = 0; 297 ptr->ew_bufsize[1] = 0; 298 ptr->ew_bufsize[2] = 0; 299 ptr->reserved = 0; 300 } 301 /* 302 * There might be a virtue in actually doing the MODE SELECTS, 303 * but let's not clog the bus over it. 304 */ 305 if (onoff == ison) 306 return 0; 307 308 /* Set up for a mode select */ 309 scsi_pdata.header.data_length = 0; 310 scsi_pdata.header.medium_type = 0; 311 if ((st->flags & ST_DONTBUFFER) == 0) 312 scsi_pdata.header.dev_spec = SMH_DSP_BUFF_MODE_ON; 313 else 314 scsi_pdata.header.dev_spec = 0; 315 316 if (scsi_pdata.header.blk_desc_len) { 317 scsi_pdata.blk_desc.density = 0; 318 scsi_pdata.blk_desc.nblocks[0] = 0; 319 scsi_pdata.blk_desc.nblocks[1] = 0; 320 scsi_pdata.blk_desc.nblocks[2] = 0; 321 } 322 323 /* Do the command */ 324 error = scsipi_mode_select(periph, SMS_PF, &scsi_pdata.header, 325 scsi_dlen, flags, ST_RETRIES, ST_CTL_TIME); 326 327 if (error && (page & SMS_PAGE_MASK) == 0xf) { 328 /* Try DEVICE CONFIGURATION page. */ 329 page = SMS_PCTRL_CURRENT | 0x10; 330 goto again; 331 } 332 return error; 333} 334