rf_layout.h revision 1.10
1/* $NetBSD: rf_layout.h,v 1.10 2003/02/09 10:04:33 jdolecek Exp $ */ 2/* 3 * Copyright (c) 1995 Carnegie-Mellon University. 4 * All rights reserved. 5 * 6 * Author: Mark Holland 7 * 8 * Permission to use, copy, modify and distribute this software and 9 * its documentation is hereby granted, provided that both the copyright 10 * notice and this permission notice appear in all copies of the 11 * software, derivative works or modified versions, and any portions 12 * thereof, and that both notices appear in supporting documentation. 13 * 14 * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" 15 * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND 16 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. 17 * 18 * Carnegie Mellon requests users of this software to return to 19 * 20 * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU 21 * School of Computer Science 22 * Carnegie Mellon University 23 * Pittsburgh PA 15213-3890 24 * 25 * any improvements or extensions that they make and grant Carnegie the 26 * rights to redistribute these changes. 27 */ 28 29/* rf_layout.h -- header file defining layout data structures 30 */ 31 32#ifndef _RF__RF_LAYOUT_H_ 33#define _RF__RF_LAYOUT_H_ 34 35#include <dev/raidframe/raidframevar.h> 36#include "rf_archs.h" 37#include "rf_alloclist.h" 38 39/* enables remapping to spare location under dist sparing */ 40#define RF_REMAP 1 41#define RF_DONT_REMAP 0 42 43/* 44 * Flags values for RF_AccessStripeMapFlags_t 45 */ 46#define RF_NO_STRIPE_LOCKS 0x0001 /* suppress stripe locks */ 47#define RF_DISTRIBUTE_SPARE 0x0002 /* distribute spare space in archs 48 * that support it */ 49#define RF_BD_DECLUSTERED 0x0004 /* declustering uses block designs */ 50 51/************************************************************************* 52 * 53 * this structure forms the layout component of the main Raid 54 * structure. It describes everything needed to define and perform 55 * the mapping of logical RAID addresses <-> physical disk addresses. 56 * 57 *************************************************************************/ 58struct RF_RaidLayout_s { 59 /* configuration parameters */ 60 RF_SectorCount_t sectorsPerStripeUnit; /* number of sectors in one 61 * stripe unit */ 62 RF_StripeCount_t SUsPerPU; /* stripe units per parity unit */ 63 RF_StripeCount_t SUsPerRU; /* stripe units per reconstruction 64 * unit */ 65 66 /* redundant-but-useful info computed from the above, used in all 67 * layouts */ 68 RF_StripeCount_t numStripe; /* total number of stripes in the 69 * array */ 70 RF_SectorCount_t dataSectorsPerStripe; 71 RF_StripeCount_t dataStripeUnitsPerDisk; 72 RF_StripeCount_t numDataCol; /* number of SUs of data per stripe 73 * (name here is a la RAID4) */ 74 RF_StripeCount_t numParityCol; /* number of SUs of parity per stripe. 75 * Always 1 for now */ 76 RF_StripeCount_t numParityLogCol; /* number of SUs of parity log 77 * per stripe. Always 1 for 78 * now */ 79 RF_StripeCount_t stripeUnitsPerDisk; 80 81 const RF_LayoutSW_t *map; /* ptr to struct holding mapping fns and 82 * information */ 83 void *layoutSpecificInfo; /* ptr to a structure holding 84 * layout-specific params */ 85}; 86/***************************************************************************************** 87 * 88 * The mapping code returns a pointer to a list of AccessStripeMap structures, which 89 * describes all the mapping information about an access. The list contains one 90 * AccessStripeMap structure per stripe touched by the access. Each element in the list 91 * contains a stripe identifier and a pointer to a list of PhysDiskAddr structuress. Each 92 * element in this latter list describes the physical location of a stripe unit accessed 93 * within the corresponding stripe. 94 * 95 ****************************************************************************************/ 96 97#define RF_PDA_TYPE_DATA 0 98#define RF_PDA_TYPE_PARITY 1 99#define RF_PDA_TYPE_Q 2 100 101struct RF_PhysDiskAddr_s { 102 RF_RowCol_t row, col; /* disk identifier */ 103 RF_SectorNum_t startSector; /* sector offset into the disk */ 104 RF_SectorCount_t numSector; /* number of sectors accessed */ 105 int type; /* used by higher levels: currently, data, 106 * parity, or q */ 107 caddr_t bufPtr; /* pointer to buffer supplying/receiving data */ 108 RF_RaidAddr_t raidAddress; /* raid address corresponding to this 109 * physical disk address */ 110 RF_PhysDiskAddr_t *next; 111}; 112#define RF_MAX_FAILED_PDA RF_MAXCOL 113 114struct RF_AccessStripeMap_s { 115 RF_StripeNum_t stripeID;/* the stripe index */ 116 RF_RaidAddr_t raidAddress; /* the starting raid address within 117 * this stripe */ 118 RF_RaidAddr_t endRaidAddress; /* raid address one sector past the 119 * end of the access */ 120 RF_SectorCount_t totalSectorsAccessed; /* total num sectors 121 * identified in physInfo list */ 122 RF_StripeCount_t numStripeUnitsAccessed; /* total num elements in 123 * physInfo list */ 124 int numDataFailed; /* number of failed data disks accessed */ 125 int numParityFailed;/* number of failed parity disks accessed (0 126 * or 1) */ 127 int numQFailed; /* number of failed Q units accessed (0 or 1) */ 128 RF_AccessStripeMapFlags_t flags; /* various flags */ 129 int numFailedPDAs; /* number of failed phys addrs */ 130 RF_PhysDiskAddr_t *failedPDAs[RF_MAX_FAILED_PDA]; /* array of failed phys 131 * addrs */ 132 RF_PhysDiskAddr_t *physInfo; /* a list of PhysDiskAddr structs */ 133 RF_PhysDiskAddr_t *parityInfo; /* list of physical addrs for the 134 * parity (P of P + Q ) */ 135 RF_PhysDiskAddr_t *qInfo; /* list of physical addrs for the Q of 136 * P + Q */ 137 RF_LockReqDesc_t lockReqDesc; /* used for stripe locking */ 138 RF_RowCol_t origRow; /* the original row: we may redirect the acc 139 * to a different row */ 140 RF_AccessStripeMap_t *next; 141}; 142/* flag values */ 143#define RF_ASM_REDIR_LARGE_WRITE 0x00000001 /* allows large-write creation 144 * code to redirect failed 145 * accs */ 146#define RF_ASM_BAILOUT_DAG_USED 0x00000002 /* allows us to detect 147 * recursive calls to the 148 * bailout write dag */ 149#define RF_ASM_FLAGS_LOCK_TRIED 0x00000004 /* we've acquired the lock on 150 * the first parity range in 151 * this parity stripe */ 152#define RF_ASM_FLAGS_LOCK_TRIED2 0x00000008 /* we've acquired the lock on 153 * the 2nd parity range in 154 * this parity stripe */ 155#define RF_ASM_FLAGS_FORCE_TRIED 0x00000010 /* we've done the force-recon 156 * call on this parity stripe */ 157#define RF_ASM_FLAGS_RECON_BLOCKED 0x00000020 /* we blocked recon => we must 158 * unblock it later */ 159 160struct RF_AccessStripeMapHeader_s { 161 RF_StripeCount_t numStripes; /* total number of stripes touched by 162 * this acc */ 163 RF_AccessStripeMap_t *stripeMap; /* pointer to the actual map. 164 * Also used for making lists */ 165 RF_AccessStripeMapHeader_t *next; 166}; 167/***************************************************************************************** 168 * 169 * various routines mapping addresses in the RAID address space. These work across 170 * all layouts. DON'T PUT ANY LAYOUT-SPECIFIC CODE HERE. 171 * 172 ****************************************************************************************/ 173 174/* return the identifier of the stripe containing the given address */ 175#define rf_RaidAddressToStripeID(_layoutPtr_, _addr_) \ 176 ( ((_addr_) / (_layoutPtr_)->sectorsPerStripeUnit) / (_layoutPtr_)->numDataCol ) 177 178/* return the raid address of the start of the indicates stripe ID */ 179#define rf_StripeIDToRaidAddress(_layoutPtr_, _sid_) \ 180 ( ((_sid_) * (_layoutPtr_)->sectorsPerStripeUnit) * (_layoutPtr_)->numDataCol ) 181 182/* return the identifier of the stripe containing the given stripe unit id */ 183#define rf_StripeUnitIDToStripeID(_layoutPtr_, _addr_) \ 184 ( (_addr_) / (_layoutPtr_)->numDataCol ) 185 186/* return the identifier of the stripe unit containing the given address */ 187#define rf_RaidAddressToStripeUnitID(_layoutPtr_, _addr_) \ 188 ( ((_addr_) / (_layoutPtr_)->sectorsPerStripeUnit) ) 189 190/* return the RAID address of next stripe boundary beyond the given address */ 191#define rf_RaidAddressOfNextStripeBoundary(_layoutPtr_, _addr_) \ 192 ( (((_addr_)/(_layoutPtr_)->dataSectorsPerStripe)+1) * (_layoutPtr_)->dataSectorsPerStripe ) 193 194/* return the RAID address of the start of the stripe containing the given address */ 195#define rf_RaidAddressOfPrevStripeBoundary(_layoutPtr_, _addr_) \ 196 ( (((_addr_)/(_layoutPtr_)->dataSectorsPerStripe)+0) * (_layoutPtr_)->dataSectorsPerStripe ) 197 198/* return the RAID address of next stripe unit boundary beyond the given address */ 199#define rf_RaidAddressOfNextStripeUnitBoundary(_layoutPtr_, _addr_) \ 200 ( (((_addr_)/(_layoutPtr_)->sectorsPerStripeUnit)+1L)*(_layoutPtr_)->sectorsPerStripeUnit ) 201 202/* return the RAID address of the start of the stripe unit containing RAID address _addr_ */ 203#define rf_RaidAddressOfPrevStripeUnitBoundary(_layoutPtr_, _addr_) \ 204 ( (((_addr_)/(_layoutPtr_)->sectorsPerStripeUnit)+0)*(_layoutPtr_)->sectorsPerStripeUnit ) 205 206/* returns the offset into the stripe. used by RaidAddressStripeAligned */ 207#define rf_RaidAddressStripeOffset(_layoutPtr_, _addr_) \ 208 ( (_addr_) % ((_layoutPtr_)->dataSectorsPerStripe) ) 209 210/* returns the offset into the stripe unit. */ 211#define rf_StripeUnitOffset(_layoutPtr_, _addr_) \ 212 ( (_addr_) % ((_layoutPtr_)->sectorsPerStripeUnit) ) 213 214/* returns nonzero if the given RAID address is stripe-aligned */ 215#define rf_RaidAddressStripeAligned( __layoutPtr__, __addr__ ) \ 216 ( rf_RaidAddressStripeOffset(__layoutPtr__, __addr__) == 0 ) 217 218/* returns nonzero if the given address is stripe-unit aligned */ 219#define rf_StripeUnitAligned( __layoutPtr__, __addr__ ) \ 220 ( rf_StripeUnitOffset(__layoutPtr__, __addr__) == 0 ) 221 222/* convert an address expressed in RAID blocks to/from an addr expressed in bytes */ 223#define rf_RaidAddressToByte(_raidPtr_, _addr_) \ 224 ( (_addr_) << ( (_raidPtr_)->logBytesPerSector ) ) 225 226#define rf_ByteToRaidAddress(_raidPtr_, _addr_) \ 227 ( (_addr_) >> ( (_raidPtr_)->logBytesPerSector ) ) 228 229/* convert a raid address to/from a parity stripe ID. Conversion to raid address is easy, 230 * since we're asking for the address of the first sector in the parity stripe. Conversion to a 231 * parity stripe ID is more complex, since stripes are not contiguously allocated in 232 * parity stripes. 233 */ 234#define rf_RaidAddressToParityStripeID(_layoutPtr_, _addr_, _ru_num_) \ 235 rf_MapStripeIDToParityStripeID( (_layoutPtr_), rf_RaidAddressToStripeID( (_layoutPtr_), (_addr_) ), (_ru_num_) ) 236 237#define rf_ParityStripeIDToRaidAddress(_layoutPtr_, _psid_) \ 238 ( (_psid_) * (_layoutPtr_)->SUsPerPU * (_layoutPtr_)->numDataCol * (_layoutPtr_)->sectorsPerStripeUnit ) 239 240const RF_LayoutSW_t *rf_GetLayout(RF_ParityConfig_t parityConfig); 241int 242rf_ConfigureLayout(RF_ShutdownList_t ** listp, RF_Raid_t * raidPtr, 243 RF_Config_t * cfgPtr); 244RF_StripeNum_t 245rf_MapStripeIDToParityStripeID(RF_RaidLayout_t * layoutPtr, 246 RF_StripeNum_t stripeID, RF_ReconUnitNum_t * which_ru); 247 248#endif /* !_RF__RF_LAYOUT_H_ */ 249