1/* $NetBSD: if_we_mca.c,v 1.22 2021/04/08 17:36:33 jdolecek Exp $ */ 2 3/*- 4 * Copyright (c) 1997, 1998, 2001 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center, and Jaromir Dolecek. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33/* 34 * Device driver for National Semiconductor DS8390/WD83C690 based ethernet 35 * adapters. 36 * 37 * Copyright (c) 1994, 1995 Charles M. Hannum. All rights reserved. 38 * 39 * Copyright (C) 1993, David Greenman. This software may be used, modified, 40 * copied, distributed, and sold, in both source and binary form provided that 41 * the above copyright and these terms are retained. Under no circumstances is 42 * the author responsible for the proper functioning of this software, nor does 43 * the author assume any responsibility for damages incurred with its use. 44 */ 45 46/* 47 * Device driver for the Western Digital/SMC 8003 and 8013 series, 48 * and the SMC Elite Ultra (8216). 49 * 50 * Currently only tested with WD8003W/A and EtherCard PLUS Elite 10T/A 51 * (8013WP/A). Other WD8003 and SMC Elite based cards should work 52 * without problems too. 53 */ 54 55#include <sys/cdefs.h> 56__KERNEL_RCSID(0, "$NetBSD: if_we_mca.c,v 1.22 2021/04/08 17:36:33 jdolecek Exp $"); 57 58#include <sys/param.h> 59#include <sys/systm.h> 60#include <sys/device.h> 61#include <sys/socket.h> 62#include <sys/mbuf.h> 63 64#include <net/if.h> 65#include <net/if_types.h> 66#include <net/if_media.h> 67#include <net/if_ether.h> 68 69#include <sys/bus.h> 70 71#include <dev/mca/mcareg.h> 72#include <dev/mca/mcavar.h> 73#include <dev/mca/mcadevs.h> 74 75#include <dev/ic/dp8390reg.h> 76#include <dev/ic/dp8390var.h> 77#include <dev/ic/wereg.h> 78#include <dev/ic/wevar.h> 79 80#define WD_8003 0x01 81#define WD_ELITE 0x02 82 83int we_mca_probe(device_t, cfdata_t , void *); 84void we_mca_attach(device_t, device_t, void *); 85void we_mca_init_hook(struct we_softc *); 86 87CFATTACH_DECL_NEW(we_mca, sizeof(struct we_softc), 88 we_mca_probe, we_mca_attach, NULL, NULL); 89 90/* 91 * The types for some cards may not be correct; hopefully it's close 92 * enough. 93 */ 94static const struct we_mca_product { 95 u_int32_t we_id; 96 const char *we_name; 97 int we_flag; 98 int we_type; 99 const char *we_typestr; 100} we_mca_products[] = { 101 { MCA_PRODUCT_WD_8013EP, "EtherCard PLUS Elite/A (8013EP/A)", 102 WD_ELITE, WE_TYPE_WD8013EP, "WD8013EP/A" }, 103 { MCA_PRODUCT_WD_8013WP, "EtherCard PLUS Elite 10T/A (8013WP/A)", 104 WD_ELITE, WE_TYPE_WD8013EP, "WD8013WP/A" }, 105 { MCA_PRODUCT_IBM_WD_2,"IBM PS/2 Adapter/A for Ethernet Networks (UTP)", 106 WD_ELITE, WE_TYPE_WD8013EP, "WD8013WP/A"}, 107 { MCA_PRODUCT_IBM_WD_T,"IBM PS/2 Adapter/A for Ethernet Networks (BNC)", 108 WD_ELITE, WE_TYPE_WD8013EP, "WD8013WP/A"}, 109 { MCA_PRODUCT_WD_8003E, "WD EtherCard PLUS/A (WD8003E/A or WD8003ET/A)", 110 WD_8003, WE_TYPE_WD8003E, "WD8003E/A or WD8003ET/A" }, 111 { MCA_PRODUCT_WD_8003ST,"WD StarCard PLUS/A (WD8003ST/A)", 112 WD_8003, WE_TYPE_WD8003W, "WD8003ST/A" }, /* XXX */ 113 { MCA_PRODUCT_WD_8003W, "WD EtherCard PLUS 10T/A (WD8003W/A)", 114 WD_8003, WE_TYPE_WD8003W, "WD8003W/A" }, 115 { MCA_PRODUCT_IBM_WD_O, "IBM PS/2 Adapter/A for Ethernet Networks", 116 WD_8003, WE_TYPE_WD8003W, "IBM PS/2 Adapter/A" }, 117 { 0x0000, NULL, 118 0, 0, NULL }, 119}; 120 121/* see POS description in we_mca_attach() */ 122static const int we_mca_irq[] = { 123 3, 4, 10, 15, 124}; 125 126static const struct we_mca_product *we_mca_lookup(int); 127 128static const struct we_mca_product * 129we_mca_lookup(int id) 130{ 131 const struct we_mca_product *wep; 132 133 for(wep = we_mca_products; wep->we_name; wep++) 134 if (wep->we_id == id) 135 return (wep); 136 137 return (NULL); 138} 139 140int 141we_mca_probe(device_t parent, cfdata_t cf, void *aux) 142{ 143 struct mca_attach_args *ma = aux; 144 145 return (we_mca_lookup(ma->ma_id) != NULL); 146} 147 148void 149we_mca_attach(device_t parent, device_t self, void *aux) 150{ 151 struct we_softc *wsc = device_private(self); 152 struct dp8390_softc *sc = &wsc->sc_dp8390; 153 struct mca_attach_args *ma = aux; 154 const struct we_mca_product *wep; 155 bus_space_tag_t nict, asict, memt; 156 bus_space_handle_t nich, asich, memh; 157 const char *typestr; 158 int irq, iobase, maddr; 159 int pos2, pos3, pos5; 160 161 sc->sc_dev = self; 162 163 pos2 = mca_conf_read(ma->ma_mc, ma->ma_slot, 2); 164 pos3 = mca_conf_read(ma->ma_mc, ma->ma_slot, 3); 165 pos5 = mca_conf_read(ma->ma_mc, ma->ma_slot, 5); 166 167 /* 168 * POS registers differ a lot between 8003 and 8013, so they are 169 * divided to two sections. 170 * 171 * 8003: POS register 2: (adf pos0) 172 * 7 6 5 4 3 2 1 0 173 * 0 0 1 \_____/ \__ enable: 0=adapter disabled, 1=adapter enabled 174 * \____ Adapter I/O Space: 0x200-0x21F + XX*0x20 175 * 176 * 8003: POS register 3: (adf pos1) 177 * 7 6 5 4 3 2 1 0 178 * 1 1 0 \___/ 1 X 179 * \______ Shared Ram Space (16K Bytes): 180 * 0xC0000-0xC3FFF + XX * 0x4000 181 * 182 * 8003: POS register 5: (adf pos3) 183 * 7 6 5 4 3 2 1 0 184 * \_/ 185 * \__ Interrupt Level: 00=3 01=4 10=10 11=15 186 * 187 * -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 188 * 189 * 8013: POS register 2: (adf pos0) 190 * 7 6 5 4 3 2 1 0 191 * \____/ \__ enable: 0=adapter disabled, 1=adapter enabled 192 * \___________ Adapter I/O Space: 0x0800-0x081F + XX * 0x1000 193 * 194 * 8013: POS register 3: (adf pos1) 195 * 7 6 5 4 3 2 1 0 196 * | X 0 | \_____/ 197 * | | \__ Shared RAM Base Address 198 * | | 0xc0000 + ((xx & 0x0f) * 0x2000) 199 * | \____________ Ram size: 0 = 8k, 1 = 16k 200 * | some size and address combinations are 201 * | not supported, varies by card :( 202 * \__________________ If set, add 0xf00000 to shared RAM base addr 203 * puts shared RAM near top of 16MB address space 204 * 205 * 8013: POS register 5: (adf pos3) 206 * 7 6 5 4 3 2 1 0 207 * \_/ \_/ 208 * \ \__ Media Select: 00=TwPr (no link) 10=BNC 209 * \ 01=AUI|AUI or 10BaseT 210 * \____ Interrupt Level: 00=3 01=4 10=10 11=14 211 */ 212 213 wep = we_mca_lookup(ma->ma_id); 214#ifdef DIAGNOSTIC 215 if (wep == NULL) { 216 aprint_error("\n%s: where did the card go?\n", 217 device_xname(self)); 218 return; 219 } 220#endif 221 222 if (wep->we_flag & WD_8003) { 223 /* WD8003 based */ 224 iobase = 0x200 + (((pos2 & 0x0e) >> 1) * 0x020); 225 maddr = 0xC0000 + (((pos3 & 0x1c) >> 2) * 0x04000); 226 irq = we_mca_irq[(pos5 & 0x03)]; 227 sc->mem_size = 16384; 228 } else { 229 /* SMC Elite */ 230 iobase = 0x800 + (((pos2 & 0xf0) >> 4) * 0x1000); 231 maddr = 0xC0000 + ((pos3 & 0x0f) * 0x2000) 232 + ((pos3 & 0x80) ? 0xF00000 : 0); 233 irq = we_mca_irq[(pos5 & 0x0c) >> 2]; 234 sc->mem_size = (pos3 & 0x10) ? 16384 : 8192; 235 } 236 237 nict = asict = ma->ma_iot; 238 memt = ma->ma_memt; 239 240 aprint_normal(" slot %d port %#x-%#x mem %#x-%#x irq %d: %s\n", 241 ma->ma_slot + 1, 242 iobase, iobase + WE_NPORTS - 1, 243 maddr, maddr + sc->mem_size - 1, 244 irq, wep->we_name); 245 246 /* Map the device. */ 247 if (bus_space_map(asict, iobase, WE_NPORTS, 0, &asich)) { 248 aprint_error_dev(self, "can't map nic i/o space\n"); 249 return; 250 } 251 252 if (bus_space_subregion(asict, asich, WE_NIC_OFFSET, WE_NIC_NPORTS, 253 &nich)) { 254 aprint_error_dev(self, "can't subregion i/o space\n"); 255 return; 256 } 257 258 wsc->sc_type = wep->we_type; 259 /* all cards we support are 16bit native (no need for reset) */ 260 wsc->sc_flags = WE_16BIT_ENABLE|WE_16BIT_NOTOGGLE; 261 sc->is790 = 0; 262 typestr = wep->we_typestr; 263 264 /* 265 * Map memory space. 266 */ 267 if (bus_space_map(memt, maddr, sc->mem_size, 0, &memh)) { 268 aprint_error_dev(self, "can't map shared memory %#x-%#x\n", 269 maddr, maddr + sc->mem_size - 1); 270 return; 271 } 272 273 wsc->sc_asict = asict; 274 wsc->sc_asich = asich; 275 276 sc->sc_regt = nict; 277 sc->sc_regh = nich; 278 279 sc->sc_buft = memt; 280 sc->sc_bufh = memh; 281 282 wsc->sc_maddr = maddr; 283 284 /* Interface is always enabled. */ 285 sc->sc_enabled = 1; 286 287 wsc->sc_init_hook = we_mca_init_hook; 288 289 if (we_config(self, wsc, typestr)) 290 return; 291 292 /* Map and establish the interrupt. */ 293 wsc->sc_ih = mca_intr_establish(ma->ma_mc, irq, 294 IPL_NET, dp8390_intr, sc); 295 if (wsc->sc_ih == NULL) { 296 aprint_error_dev(self, "can't establish interrupt\n"); 297 return; 298 } 299} 300 301void 302we_mca_init_hook(struct we_softc *wsc) 303{ 304 /* 305 * Enable interrupts. This is required for at least WD8003W/A, without 306 * this, the card doesn't send any interrupts in 16bit mode. The code 307 * was taken from Linux smc-mca.c driver. 308 */ 309 bus_space_write_1(wsc->sc_asict, wsc->sc_asich, WE_LAAR, 0x04); 310 wsc->sc_laar_proto |= 0x04; 311} 312