1/* $NetBSD: rt2560.c,v 1.40 2021/12/05 02:47:01 msaitoh Exp $ */ 2/* $OpenBSD: rt2560.c,v 1.15 2006/04/20 20:31:12 miod Exp $ */ 3/* $FreeBSD: rt2560.c,v 1.3 2006/03/21 21:15:43 damien Exp $*/ 4 5/*- 6 * Copyright (c) 2005, 2006 7 * Damien Bergamini <damien.bergamini@free.fr> 8 * 9 * Permission to use, copy, modify, and distribute this software for any 10 * purpose with or without fee is hereby granted, provided that the above 11 * copyright notice and this permission notice appear in all copies. 12 * 13 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 14 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 15 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 16 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 17 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 18 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 19 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 20 */ 21 22/*- 23 * Ralink Technology RT2560 chipset driver 24 * http://www.ralinktech.com/ 25 */ 26#include <sys/cdefs.h> 27__KERNEL_RCSID(0, "$NetBSD: rt2560.c,v 1.40 2021/12/05 02:47:01 msaitoh Exp $"); 28 29 30#include <sys/param.h> 31#include <sys/sockio.h> 32#include <sys/mbuf.h> 33#include <sys/kernel.h> 34#include <sys/socket.h> 35#include <sys/systm.h> 36#include <sys/malloc.h> 37#include <sys/callout.h> 38#include <sys/conf.h> 39#include <sys/device.h> 40 41#include <sys/bus.h> 42#include <machine/endian.h> 43#include <sys/intr.h> 44 45#include <net/bpf.h> 46#include <net/if.h> 47#include <net/if_arp.h> 48#include <net/if_dl.h> 49#include <net/if_media.h> 50#include <net/if_types.h> 51#include <net/if_ether.h> 52 53#include <netinet/in.h> 54#include <netinet/in_systm.h> 55#include <netinet/in_var.h> 56#include <netinet/ip.h> 57 58#include <net80211/ieee80211_var.h> 59#include <net80211/ieee80211_rssadapt.h> 60#include <net80211/ieee80211_radiotap.h> 61 62#include <dev/ic/rt2560reg.h> 63#include <dev/ic/rt2560var.h> 64 65#ifdef RAL_DEBUG 66#define DPRINTF(x) do { if (rt2560_debug > 0) printf x; } while (0) 67#define DPRINTFN(n, x) do { if (rt2560_debug >= (n)) printf x; } while (0) 68int rt2560_debug = 0; 69#else 70#define DPRINTF(x) 71#define DPRINTFN(n, x) 72#endif 73 74static int rt2560_alloc_tx_ring(struct rt2560_softc *, 75 struct rt2560_tx_ring *, int); 76static void rt2560_reset_tx_ring(struct rt2560_softc *, 77 struct rt2560_tx_ring *); 78static void rt2560_free_tx_ring(struct rt2560_softc *, 79 struct rt2560_tx_ring *); 80static int rt2560_alloc_rx_ring(struct rt2560_softc *, 81 struct rt2560_rx_ring *, int); 82static void rt2560_reset_rx_ring(struct rt2560_softc *, 83 struct rt2560_rx_ring *); 84static void rt2560_free_rx_ring(struct rt2560_softc *, 85 struct rt2560_rx_ring *); 86static struct ieee80211_node * 87 rt2560_node_alloc(struct ieee80211_node_table *); 88static int rt2560_media_change(struct ifnet *); 89static void rt2560_next_scan(void *); 90static void rt2560_iter_func(void *, struct ieee80211_node *); 91static void rt2560_update_rssadapt(void *); 92static int rt2560_newstate(struct ieee80211com *, enum ieee80211_state, 93 int); 94static uint16_t rt2560_eeprom_read(struct rt2560_softc *, uint8_t); 95static void rt2560_encryption_intr(struct rt2560_softc *); 96static void rt2560_tx_intr(struct rt2560_softc *); 97static void rt2560_prio_intr(struct rt2560_softc *); 98static void rt2560_decryption_intr(struct rt2560_softc *); 99static void rt2560_rx_intr(struct rt2560_softc *); 100static void rt2560_beacon_expire(struct rt2560_softc *); 101static void rt2560_wakeup_expire(struct rt2560_softc *); 102static uint8_t rt2560_rxrate(struct rt2560_rx_desc *); 103static int rt2560_ack_rate(struct ieee80211com *, int); 104static uint16_t rt2560_txtime(int, int, uint32_t); 105static uint8_t rt2560_plcp_signal(int); 106static void rt2560_setup_tx_desc(struct rt2560_softc *, 107 struct rt2560_tx_desc *, uint32_t, int, int, int, 108 bus_addr_t); 109static int rt2560_tx_bcn(struct rt2560_softc *, struct mbuf *, 110 struct ieee80211_node *); 111static int rt2560_tx_mgt(struct rt2560_softc *, struct mbuf *, 112 struct ieee80211_node *); 113static struct mbuf *rt2560_get_rts(struct rt2560_softc *, 114 struct ieee80211_frame *, uint16_t); 115static int rt2560_tx_data(struct rt2560_softc *, struct mbuf *, 116 struct ieee80211_node *); 117static void rt2560_start(struct ifnet *); 118static void rt2560_watchdog(struct ifnet *); 119static int rt2560_reset(struct ifnet *); 120static int rt2560_ioctl(struct ifnet *, u_long, void *); 121static void rt2560_bbp_write(struct rt2560_softc *, uint8_t, uint8_t); 122static uint8_t rt2560_bbp_read(struct rt2560_softc *, uint8_t); 123static void rt2560_rf_write(struct rt2560_softc *, uint8_t, uint32_t); 124static void rt2560_set_chan(struct rt2560_softc *, 125 struct ieee80211_channel *); 126static void rt2560_disable_rf_tune(struct rt2560_softc *); 127static void rt2560_enable_tsf_sync(struct rt2560_softc *); 128static void rt2560_update_plcp(struct rt2560_softc *); 129static void rt2560_update_slot(struct ifnet *); 130static void rt2560_set_basicrates(struct rt2560_softc *); 131static void rt2560_update_led(struct rt2560_softc *, int, int); 132static void rt2560_set_bssid(struct rt2560_softc *, uint8_t *); 133static void rt2560_set_macaddr(struct rt2560_softc *, uint8_t *); 134static void rt2560_get_macaddr(struct rt2560_softc *, uint8_t *); 135static void rt2560_update_promisc(struct rt2560_softc *); 136static void rt2560_set_txantenna(struct rt2560_softc *, int); 137static void rt2560_set_rxantenna(struct rt2560_softc *, int); 138static const char *rt2560_get_rf(int); 139static void rt2560_read_eeprom(struct rt2560_softc *); 140static int rt2560_bbp_init(struct rt2560_softc *); 141static int rt2560_init(struct ifnet *); 142static void rt2560_stop(struct ifnet *, int); 143static void rt2560_softintr(void *); 144 145/* 146 * Default values for MAC registers; values taken from the reference driver. 147 */ 148static const struct { 149 uint32_t reg; 150 uint32_t val; 151} rt2560_def_mac[] = { 152 { RT2560_PSCSR0, 0x00020002 }, 153 { RT2560_PSCSR1, 0x00000002 }, 154 { RT2560_PSCSR2, 0x00020002 }, 155 { RT2560_PSCSR3, 0x00000002 }, 156 { RT2560_TIMECSR, 0x00003f21 }, 157 { RT2560_CSR9, 0x00000780 }, 158 { RT2560_CSR11, 0x07041483 }, 159 { RT2560_CNT3, 0x00000000 }, 160 { RT2560_TXCSR1, 0x07614562 }, 161 { RT2560_ARSP_PLCP_0, 0x8c8d8b8a }, 162 { RT2560_ACKPCTCSR, 0x7038140a }, 163 { RT2560_ARTCSR1, 0x1d21252d }, 164 { RT2560_ARTCSR2, 0x1919191d }, 165 { RT2560_RXCSR0, 0xffffffff }, 166 { RT2560_RXCSR3, 0xb3aab3af }, 167 { RT2560_PCICSR, 0x000003b8 }, 168 { RT2560_PWRCSR0, 0x3f3b3100 }, 169 { RT2560_GPIOCSR, 0x0000ff00 }, 170 { RT2560_TESTCSR, 0x000000f0 }, 171 { RT2560_PWRCSR1, 0x000001ff }, 172 { RT2560_MACCSR0, 0x00213223 }, 173 { RT2560_MACCSR1, 0x00235518 }, 174 { RT2560_RLPWCSR, 0x00000040 }, 175 { RT2560_RALINKCSR, 0x9a009a11 }, 176 { RT2560_CSR7, 0xffffffff }, 177 { RT2560_BBPCSR1, 0x82188200 }, 178 { RT2560_TXACKCSR0, 0x00000020 }, 179 { RT2560_SECCSR3, 0x0000e78f } 180}; 181 182/* 183 * Default values for BBP registers; values taken from the reference driver. 184 */ 185static const struct { 186 uint8_t reg; 187 uint8_t val; 188} rt2560_def_bbp[] = { 189 { 3, 0x02 }, 190 { 4, 0x19 }, 191 { 14, 0x1c }, 192 { 15, 0x30 }, 193 { 16, 0xac }, 194 { 17, 0x48 }, 195 { 18, 0x18 }, 196 { 19, 0xff }, 197 { 20, 0x1e }, 198 { 21, 0x08 }, 199 { 22, 0x08 }, 200 { 23, 0x08 }, 201 { 24, 0x80 }, 202 { 25, 0x50 }, 203 { 26, 0x08 }, 204 { 27, 0x23 }, 205 { 30, 0x10 }, 206 { 31, 0x2b }, 207 { 32, 0xb9 }, 208 { 34, 0x12 }, 209 { 35, 0x50 }, 210 { 39, 0xc4 }, 211 { 40, 0x02 }, 212 { 41, 0x60 }, 213 { 53, 0x10 }, 214 { 54, 0x18 }, 215 { 56, 0x08 }, 216 { 57, 0x10 }, 217 { 58, 0x08 }, 218 { 61, 0x60 }, 219 { 62, 0x10 }, 220 { 75, 0xff } 221}; 222 223/* 224 * Default values for RF register R2 indexed by channel numbers; values taken 225 * from the reference driver. 226 */ 227static const uint32_t rt2560_rf2522_r2[] = { 228 0x307f6, 0x307fb, 0x30800, 0x30805, 0x3080a, 0x3080f, 0x30814, 229 0x30819, 0x3081e, 0x30823, 0x30828, 0x3082d, 0x30832, 0x3083e 230}; 231 232static const uint32_t rt2560_rf2523_r2[] = { 233 0x00327, 0x00328, 0x00329, 0x0032a, 0x0032b, 0x0032c, 0x0032d, 234 0x0032e, 0x0032f, 0x00340, 0x00341, 0x00342, 0x00343, 0x00346 235}; 236 237static const uint32_t rt2560_rf2524_r2[] = { 238 0x00327, 0x00328, 0x00329, 0x0032a, 0x0032b, 0x0032c, 0x0032d, 239 0x0032e, 0x0032f, 0x00340, 0x00341, 0x00342, 0x00343, 0x00346 240}; 241 242static const uint32_t rt2560_rf2525_r2[] = { 243 0x20327, 0x20328, 0x20329, 0x2032a, 0x2032b, 0x2032c, 0x2032d, 244 0x2032e, 0x2032f, 0x20340, 0x20341, 0x20342, 0x20343, 0x20346 245}; 246 247static const uint32_t rt2560_rf2525_hi_r2[] = { 248 0x2032f, 0x20340, 0x20341, 0x20342, 0x20343, 0x20344, 0x20345, 249 0x20346, 0x20347, 0x20348, 0x20349, 0x2034a, 0x2034b, 0x2034e 250}; 251 252static const uint32_t rt2560_rf2525e_r2[] = { 253 0x2044d, 0x2044e, 0x2044f, 0x20460, 0x20461, 0x20462, 0x20463, 254 0x20464, 0x20465, 0x20466, 0x20467, 0x20468, 0x20469, 0x2046b 255}; 256 257static const uint32_t rt2560_rf2526_hi_r2[] = { 258 0x0022a, 0x0022b, 0x0022b, 0x0022c, 0x0022c, 0x0022d, 0x0022d, 259 0x0022e, 0x0022e, 0x0022f, 0x0022d, 0x00240, 0x00240, 0x00241 260}; 261 262static const uint32_t rt2560_rf2526_r2[] = { 263 0x00226, 0x00227, 0x00227, 0x00228, 0x00228, 0x00229, 0x00229, 264 0x0022a, 0x0022a, 0x0022b, 0x0022b, 0x0022c, 0x0022c, 0x0022d 265}; 266 267/* 268 * For dual-band RF, RF registers R1 and R4 also depend on channel number; 269 * values taken from the reference driver. 270 */ 271static const struct { 272 uint8_t chan; 273 uint32_t r1; 274 uint32_t r2; 275 uint32_t r4; 276} rt2560_rf5222[] = { 277 { 1, 0x08808, 0x0044d, 0x00282 }, 278 { 2, 0x08808, 0x0044e, 0x00282 }, 279 { 3, 0x08808, 0x0044f, 0x00282 }, 280 { 4, 0x08808, 0x00460, 0x00282 }, 281 { 5, 0x08808, 0x00461, 0x00282 }, 282 { 6, 0x08808, 0x00462, 0x00282 }, 283 { 7, 0x08808, 0x00463, 0x00282 }, 284 { 8, 0x08808, 0x00464, 0x00282 }, 285 { 9, 0x08808, 0x00465, 0x00282 }, 286 { 10, 0x08808, 0x00466, 0x00282 }, 287 { 11, 0x08808, 0x00467, 0x00282 }, 288 { 12, 0x08808, 0x00468, 0x00282 }, 289 { 13, 0x08808, 0x00469, 0x00282 }, 290 { 14, 0x08808, 0x0046b, 0x00286 }, 291 292 { 36, 0x08804, 0x06225, 0x00287 }, 293 { 40, 0x08804, 0x06226, 0x00287 }, 294 { 44, 0x08804, 0x06227, 0x00287 }, 295 { 48, 0x08804, 0x06228, 0x00287 }, 296 { 52, 0x08804, 0x06229, 0x00287 }, 297 { 56, 0x08804, 0x0622a, 0x00287 }, 298 { 60, 0x08804, 0x0622b, 0x00287 }, 299 { 64, 0x08804, 0x0622c, 0x00287 }, 300 301 { 100, 0x08804, 0x02200, 0x00283 }, 302 { 104, 0x08804, 0x02201, 0x00283 }, 303 { 108, 0x08804, 0x02202, 0x00283 }, 304 { 112, 0x08804, 0x02203, 0x00283 }, 305 { 116, 0x08804, 0x02204, 0x00283 }, 306 { 120, 0x08804, 0x02205, 0x00283 }, 307 { 124, 0x08804, 0x02206, 0x00283 }, 308 { 128, 0x08804, 0x02207, 0x00283 }, 309 { 132, 0x08804, 0x02208, 0x00283 }, 310 { 136, 0x08804, 0x02209, 0x00283 }, 311 { 140, 0x08804, 0x0220a, 0x00283 }, 312 313 { 149, 0x08808, 0x02429, 0x00281 }, 314 { 153, 0x08808, 0x0242b, 0x00281 }, 315 { 157, 0x08808, 0x0242d, 0x00281 }, 316 { 161, 0x08808, 0x0242f, 0x00281 } 317}; 318 319int 320rt2560_attach(void *xsc, int id) 321{ 322 struct rt2560_softc *sc = xsc; 323 struct ieee80211com *ic = &sc->sc_ic; 324 struct ifnet *ifp = &sc->sc_if; 325 int error, i; 326 327 callout_init(&sc->scan_ch, 0); 328 callout_init(&sc->rssadapt_ch, 0); 329 330 /* retrieve RT2560 rev. no */ 331 sc->asic_rev = RAL_READ(sc, RT2560_CSR0); 332 333 /* retrieve MAC address */ 334 rt2560_get_macaddr(sc, ic->ic_myaddr); 335 336 aprint_normal_dev(sc->sc_dev, "802.11 address %s\n", 337 ether_sprintf(ic->ic_myaddr)); 338 339 /* retrieve RF rev. no and various other things from EEPROM */ 340 rt2560_read_eeprom(sc); 341 342 aprint_normal_dev(sc->sc_dev, "MAC/BBP RT2560 (rev 0x%02x), RF %s\n", 343 sc->asic_rev, rt2560_get_rf(sc->rf_rev)); 344 345 sc->sc_soft_ih = softint_establish(SOFTINT_NET, rt2560_softintr, sc); 346 if (sc->sc_soft_ih == NULL) { 347 aprint_error_dev(sc->sc_dev, "could not establish softint\n)"); 348 goto fail0; 349 } 350 351 /* 352 * Allocate Tx and Rx rings. 353 */ 354 error = rt2560_alloc_tx_ring(sc, &sc->txq, RT2560_TX_RING_COUNT); 355 if (error != 0) { 356 aprint_error_dev(sc->sc_dev, "could not allocate Tx ring\n)"); 357 goto fail1; 358 } 359 360 error = rt2560_alloc_tx_ring(sc, &sc->atimq, RT2560_ATIM_RING_COUNT); 361 if (error != 0) { 362 aprint_error_dev(sc->sc_dev, "could not allocate ATIM ring\n"); 363 goto fail2; 364 } 365 366 error = rt2560_alloc_tx_ring(sc, &sc->prioq, RT2560_PRIO_RING_COUNT); 367 if (error != 0) { 368 aprint_error_dev(sc->sc_dev, "could not allocate Prio ring\n"); 369 goto fail3; 370 } 371 372 error = rt2560_alloc_tx_ring(sc, &sc->bcnq, RT2560_BEACON_RING_COUNT); 373 if (error != 0) { 374 aprint_error_dev(sc->sc_dev, "could not allocate Beacon ring\n"); 375 goto fail4; 376 } 377 378 error = rt2560_alloc_rx_ring(sc, &sc->rxq, RT2560_RX_RING_COUNT); 379 if (error != 0) { 380 aprint_error_dev(sc->sc_dev, "could not allocate Rx ring\n"); 381 goto fail5; 382 } 383 384 ifp->if_softc = sc; 385 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 386 ifp->if_init = rt2560_init; 387 ifp->if_stop = rt2560_stop; 388 ifp->if_ioctl = rt2560_ioctl; 389 ifp->if_start = rt2560_start; 390 ifp->if_watchdog = rt2560_watchdog; 391 IFQ_SET_READY(&ifp->if_snd); 392 memcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); 393 394 ic->ic_ifp = ifp; 395 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 396 ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ 397 ic->ic_state = IEEE80211_S_INIT; 398 399 /* set device capabilities */ 400 ic->ic_caps = 401 IEEE80211_C_IBSS | /* IBSS mode supported */ 402 IEEE80211_C_MONITOR | /* monitor mode supported */ 403 IEEE80211_C_HOSTAP | /* HostAp mode supported */ 404 IEEE80211_C_TXPMGT | /* tx power management */ 405 IEEE80211_C_SHPREAMBLE | /* short preamble supported */ 406 IEEE80211_C_SHSLOT | /* short slot time supported */ 407 IEEE80211_C_WPA; /* 802.11i */ 408 409 if (sc->rf_rev == RT2560_RF_5222) { 410 /* set supported .11a rates */ 411 ic->ic_sup_rates[IEEE80211_MODE_11A] = ieee80211_std_rateset_11a; 412 413 /* set supported .11a channels */ 414 for (i = 36; i <= 64; i += 4) { 415 ic->ic_channels[i].ic_freq = 416 ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); 417 ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A; 418 } 419 for (i = 100; i <= 140; i += 4) { 420 ic->ic_channels[i].ic_freq = 421 ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); 422 ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A; 423 } 424 for (i = 149; i <= 161; i += 4) { 425 ic->ic_channels[i].ic_freq = 426 ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); 427 ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A; 428 } 429 } 430 431 /* set supported .11b and .11g rates */ 432 ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b; 433 ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g; 434 435 /* set supported .11b and .11g channels (1 through 14) */ 436 for (i = 1; i <= 14; i++) { 437 ic->ic_channels[i].ic_freq = 438 ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ); 439 ic->ic_channels[i].ic_flags = 440 IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | 441 IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ; 442 } 443 444 if_initialize(ifp); 445 ieee80211_ifattach(ic); 446 /* Use common softint-based if_input */ 447 ifp->if_percpuq = if_percpuq_create(ifp); 448 if_register(ifp); 449 450 ic->ic_node_alloc = rt2560_node_alloc; 451 ic->ic_updateslot = rt2560_update_slot; 452 ic->ic_reset = rt2560_reset; 453 454 /* override state transition machine */ 455 sc->sc_newstate = ic->ic_newstate; 456 ic->ic_newstate = rt2560_newstate; 457 ieee80211_media_init(ic, rt2560_media_change, ieee80211_media_status); 458 459 bpf_attach2(ifp, DLT_IEEE802_11_RADIO, 460 sizeof(struct ieee80211_frame) + 64, &sc->sc_drvbpf); 461 462 sc->sc_rxtap_len = sizeof sc->sc_rxtapu; 463 sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len); 464 sc->sc_rxtap.wr_ihdr.it_present = htole32(RT2560_RX_RADIOTAP_PRESENT); 465 466 sc->sc_txtap_len = sizeof sc->sc_txtapu; 467 sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len); 468 sc->sc_txtap.wt_ihdr.it_present = htole32(RT2560_TX_RADIOTAP_PRESENT); 469 470 471 sc->dwelltime = 200; 472 473 ieee80211_announce(ic); 474 475 if (pmf_device_register(sc->sc_dev, NULL, NULL)) 476 pmf_class_network_register(sc->sc_dev, ifp); 477 else 478 aprint_error_dev(sc->sc_dev, 479 "couldn't establish power handler\n"); 480 481 return 0; 482 483fail5: rt2560_free_tx_ring(sc, &sc->bcnq); 484fail4: rt2560_free_tx_ring(sc, &sc->prioq); 485fail3: rt2560_free_tx_ring(sc, &sc->atimq); 486fail2: rt2560_free_tx_ring(sc, &sc->txq); 487fail1: softint_disestablish(sc->sc_soft_ih); 488 sc->sc_soft_ih = NULL; 489fail0: return ENXIO; 490} 491 492 493int 494rt2560_detach(void *xsc) 495{ 496 struct rt2560_softc *sc = xsc; 497 struct ifnet *ifp = &sc->sc_if; 498 499 callout_stop(&sc->scan_ch); 500 callout_stop(&sc->rssadapt_ch); 501 502 pmf_device_deregister(sc->sc_dev); 503 504 rt2560_stop(ifp, 1); 505 506 ieee80211_ifdetach(&sc->sc_ic); /* free all nodes */ 507 if_detach(ifp); 508 509 rt2560_free_tx_ring(sc, &sc->txq); 510 rt2560_free_tx_ring(sc, &sc->atimq); 511 rt2560_free_tx_ring(sc, &sc->prioq); 512 rt2560_free_tx_ring(sc, &sc->bcnq); 513 rt2560_free_rx_ring(sc, &sc->rxq); 514 515 if (sc->sc_soft_ih != NULL) { 516 softint_disestablish(sc->sc_soft_ih); 517 sc->sc_soft_ih = NULL; 518 } 519 520 return 0; 521} 522 523int 524rt2560_alloc_tx_ring(struct rt2560_softc *sc, struct rt2560_tx_ring *ring, 525 int count) 526{ 527 int i, nsegs, error; 528 529 ring->count = count; 530 ring->queued = 0; 531 ring->cur = ring->next = 0; 532 ring->cur_encrypt = ring->next_encrypt = 0; 533 534 error = bus_dmamap_create(sc->sc_dmat, count * RT2560_TX_DESC_SIZE, 1, 535 count * RT2560_TX_DESC_SIZE, 0, BUS_DMA_NOWAIT, &ring->map); 536 if (error != 0) { 537 aprint_error_dev(sc->sc_dev, "could not create desc DMA map\n"); 538 goto fail; 539 } 540 541 error = bus_dmamem_alloc(sc->sc_dmat, count * RT2560_TX_DESC_SIZE, 542 PAGE_SIZE, 0, &ring->seg, 1, &nsegs, BUS_DMA_NOWAIT); 543 if (error != 0) { 544 aprint_error_dev(sc->sc_dev, "could not allocate DMA memory\n"); 545 goto fail; 546 } 547 548 error = bus_dmamem_map(sc->sc_dmat, &ring->seg, nsegs, 549 count * RT2560_TX_DESC_SIZE, (void **)&ring->desc, 550 BUS_DMA_NOWAIT); 551 if (error != 0) { 552 aprint_error_dev(sc->sc_dev, "could not map desc DMA memory\n"); 553 goto fail; 554 } 555 556 error = bus_dmamap_load(sc->sc_dmat, ring->map, ring->desc, 557 count * RT2560_TX_DESC_SIZE, NULL, BUS_DMA_NOWAIT); 558 if (error != 0) { 559 aprint_error_dev(sc->sc_dev, "could not load desc DMA map\n"); 560 goto fail; 561 } 562 563 memset(ring->desc, 0, count * RT2560_TX_DESC_SIZE); 564 ring->physaddr = ring->map->dm_segs->ds_addr; 565 566 ring->data = malloc(count * sizeof (struct rt2560_tx_data), M_DEVBUF, 567 M_WAITOK | M_ZERO); 568 569 for (i = 0; i < count; i++) { 570 error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 571 RT2560_MAX_SCATTER, MCLBYTES, 0, BUS_DMA_NOWAIT, 572 &ring->data[i].map); 573 if (error != 0) { 574 aprint_error_dev(sc->sc_dev, "could not create DMA map\n"); 575 goto fail; 576 } 577 } 578 579 return 0; 580 581fail: rt2560_free_tx_ring(sc, ring); 582 return error; 583} 584 585void 586rt2560_reset_tx_ring(struct rt2560_softc *sc, struct rt2560_tx_ring *ring) 587{ 588 struct rt2560_tx_desc *desc; 589 struct rt2560_tx_data *data; 590 int i; 591 592 for (i = 0; i < ring->count; i++) { 593 desc = &ring->desc[i]; 594 data = &ring->data[i]; 595 596 if (data->m != NULL) { 597 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 598 data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 599 bus_dmamap_unload(sc->sc_dmat, data->map); 600 m_freem(data->m); 601 data->m = NULL; 602 } 603 604 if (data->ni != NULL) { 605 ieee80211_free_node(data->ni); 606 data->ni = NULL; 607 } 608 609 desc->flags = 0; 610 } 611 612 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, ring->map->dm_mapsize, 613 BUS_DMASYNC_PREWRITE); 614 615 ring->queued = 0; 616 ring->cur = ring->next = 0; 617 ring->cur_encrypt = ring->next_encrypt = 0; 618} 619 620void 621rt2560_free_tx_ring(struct rt2560_softc *sc, struct rt2560_tx_ring *ring) 622{ 623 struct rt2560_tx_data *data; 624 int i; 625 626 if (ring->desc != NULL) { 627 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, 628 ring->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 629 bus_dmamap_unload(sc->sc_dmat, ring->map); 630 bus_dmamem_unmap(sc->sc_dmat, (void *)ring->desc, 631 ring->count * RT2560_TX_DESC_SIZE); 632 bus_dmamem_free(sc->sc_dmat, &ring->seg, 1); 633 } 634 635 if (ring->data != NULL) { 636 for (i = 0; i < ring->count; i++) { 637 data = &ring->data[i]; 638 639 if (data->m != NULL) { 640 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 641 data->map->dm_mapsize, 642 BUS_DMASYNC_POSTWRITE); 643 bus_dmamap_unload(sc->sc_dmat, data->map); 644 m_freem(data->m); 645 } 646 647 if (data->ni != NULL) 648 ieee80211_free_node(data->ni); 649 650 651 if (data->map != NULL) 652 bus_dmamap_destroy(sc->sc_dmat, data->map); 653 } 654 free(ring->data, M_DEVBUF); 655 } 656} 657 658int 659rt2560_alloc_rx_ring(struct rt2560_softc *sc, struct rt2560_rx_ring *ring, 660 int count) 661{ 662 struct rt2560_rx_desc *desc; 663 struct rt2560_rx_data *data; 664 int i, nsegs, error; 665 666 ring->count = count; 667 ring->cur = ring->next = 0; 668 ring->cur_decrypt = 0; 669 670 error = bus_dmamap_create(sc->sc_dmat, count * RT2560_RX_DESC_SIZE, 1, 671 count * RT2560_RX_DESC_SIZE, 0, BUS_DMA_NOWAIT, &ring->map); 672 if (error != 0) { 673 aprint_error_dev(sc->sc_dev, "could not create desc DMA map\n"); 674 goto fail; 675 } 676 677 error = bus_dmamem_alloc(sc->sc_dmat, count * RT2560_RX_DESC_SIZE, 678 PAGE_SIZE, 0, &ring->seg, 1, &nsegs, BUS_DMA_NOWAIT); 679 if (error != 0) { 680 aprint_error_dev(sc->sc_dev, "could not allocate DMA memory\n"); 681 goto fail; 682 } 683 684 error = bus_dmamem_map(sc->sc_dmat, &ring->seg, nsegs, 685 count * RT2560_RX_DESC_SIZE, (void **)&ring->desc, 686 BUS_DMA_NOWAIT); 687 if (error != 0) { 688 aprint_error_dev(sc->sc_dev, "could not map desc DMA memory\n"); 689 goto fail; 690 } 691 692 error = bus_dmamap_load(sc->sc_dmat, ring->map, ring->desc, 693 count * RT2560_RX_DESC_SIZE, NULL, BUS_DMA_NOWAIT); 694 if (error != 0) { 695 aprint_error_dev(sc->sc_dev, "could not load desc DMA map\n"); 696 goto fail; 697 } 698 699 memset(ring->desc, 0, count * RT2560_RX_DESC_SIZE); 700 ring->physaddr = ring->map->dm_segs->ds_addr; 701 702 ring->data = malloc(count * sizeof (struct rt2560_rx_data), M_DEVBUF, 703 M_WAITOK | M_ZERO); 704 705 /* 706 * Pre-allocate Rx buffers and populate Rx ring. 707 */ 708 for (i = 0; i < count; i++) { 709 desc = &sc->rxq.desc[i]; 710 data = &sc->rxq.data[i]; 711 712 error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 713 0, BUS_DMA_NOWAIT, &data->map); 714 if (error != 0) { 715 aprint_error_dev(sc->sc_dev, "could not create DMA map\n"); 716 goto fail; 717 } 718 719 MGETHDR(data->m, M_DONTWAIT, MT_DATA); 720 if (data->m == NULL) { 721 aprint_error_dev(sc->sc_dev, "could not allocate rx mbuf\n"); 722 error = ENOMEM; 723 goto fail; 724 } 725 726 MCLGET(data->m, M_DONTWAIT); 727 if (!(data->m->m_flags & M_EXT)) { 728 aprint_error_dev(sc->sc_dev, "could not allocate rx mbuf cluster\n"); 729 error = ENOMEM; 730 goto fail; 731 } 732 733 error = bus_dmamap_load(sc->sc_dmat, data->map, 734 mtod(data->m, void *), MCLBYTES, NULL, BUS_DMA_NOWAIT); 735 if (error != 0) { 736 aprint_error_dev(sc->sc_dev, "could not load rx buf DMA map"); 737 goto fail; 738 } 739 740 desc->flags = htole32(RT2560_RX_BUSY); 741 desc->physaddr = htole32(data->map->dm_segs->ds_addr); 742 } 743 744 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, ring->map->dm_mapsize, 745 BUS_DMASYNC_PREWRITE); 746 747 return 0; 748 749fail: rt2560_free_rx_ring(sc, ring); 750 return error; 751} 752 753void 754rt2560_reset_rx_ring(struct rt2560_softc *sc, struct rt2560_rx_ring *ring) 755{ 756 int i; 757 758 for (i = 0; i < ring->count; i++) { 759 ring->desc[i].flags = htole32(RT2560_RX_BUSY); 760 ring->data[i].drop = 0; 761 } 762 763 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, ring->map->dm_mapsize, 764 BUS_DMASYNC_PREWRITE); 765 766 ring->cur = ring->next = 0; 767 ring->cur_decrypt = 0; 768} 769 770void 771rt2560_free_rx_ring(struct rt2560_softc *sc, struct rt2560_rx_ring *ring) 772{ 773 struct rt2560_rx_data *data; 774 int i; 775 776 if (ring->desc != NULL) { 777 bus_dmamap_sync(sc->sc_dmat, ring->map, 0, 778 ring->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 779 bus_dmamap_unload(sc->sc_dmat, ring->map); 780 bus_dmamem_unmap(sc->sc_dmat, (void *)ring->desc, 781 ring->count * RT2560_RX_DESC_SIZE); 782 bus_dmamem_free(sc->sc_dmat, &ring->seg, 1); 783 } 784 785 if (ring->data != NULL) { 786 for (i = 0; i < ring->count; i++) { 787 data = &ring->data[i]; 788 789 if (data->m != NULL) { 790 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 791 data->map->dm_mapsize, 792 BUS_DMASYNC_POSTREAD); 793 bus_dmamap_unload(sc->sc_dmat, data->map); 794 m_freem(data->m); 795 } 796 797 if (data->map != NULL) 798 bus_dmamap_destroy(sc->sc_dmat, data->map); 799 } 800 free(ring->data, M_DEVBUF); 801 } 802} 803 804struct ieee80211_node * 805rt2560_node_alloc(struct ieee80211_node_table *nt) 806{ 807 struct rt2560_node *rn; 808 809 rn = malloc(sizeof (struct rt2560_node), M_80211_NODE, 810 M_NOWAIT | M_ZERO); 811 812 return (rn != NULL) ? &rn->ni : NULL; 813} 814 815int 816rt2560_media_change(struct ifnet *ifp) 817{ 818 int error; 819 820 error = ieee80211_media_change(ifp); 821 if (error != ENETRESET) 822 return error; 823 824 if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == (IFF_UP | IFF_RUNNING)) 825 rt2560_init(ifp); 826 827 return 0; 828} 829 830/* 831 * This function is called periodically (every 200ms) during scanning to 832 * switch from one channel to another. 833 */ 834void 835rt2560_next_scan(void *arg) 836{ 837 struct rt2560_softc *sc = arg; 838 struct ieee80211com *ic = &sc->sc_ic; 839 int s; 840 841 s = splnet(); 842 if (ic->ic_state == IEEE80211_S_SCAN) 843 ieee80211_next_scan(ic); 844 splx(s); 845} 846 847/* 848 * This function is called for each neighbor node. 849 */ 850void 851rt2560_iter_func(void *arg, struct ieee80211_node *ni) 852{ 853 struct rt2560_node *rn = (struct rt2560_node *)ni; 854 855 ieee80211_rssadapt_updatestats(&rn->rssadapt); 856} 857 858/* 859 * This function is called periodically (every 100ms) in RUN state to update 860 * the rate adaptation statistics. 861 */ 862void 863rt2560_update_rssadapt(void *arg) 864{ 865 struct rt2560_softc *sc = arg; 866 struct ieee80211com *ic = &sc->sc_ic; 867 int s; 868 869 s = splnet(); 870 ieee80211_iterate_nodes(&ic->ic_sta, rt2560_iter_func, arg); 871 872 callout_reset(&sc->rssadapt_ch, hz / 10, rt2560_update_rssadapt, sc); 873 splx(s); 874} 875 876int 877rt2560_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) 878{ 879 struct rt2560_softc *sc = ic->ic_ifp->if_softc; 880 enum ieee80211_state ostate; 881 struct ieee80211_node *ni; 882 struct mbuf *m; 883 int error = 0; 884 885 ostate = ic->ic_state; 886 callout_stop(&sc->scan_ch); 887 888 switch (nstate) { 889 case IEEE80211_S_INIT: 890 callout_stop(&sc->rssadapt_ch); 891 892 if (ostate == IEEE80211_S_RUN) { 893 /* abort TSF synchronization */ 894 RAL_WRITE(sc, RT2560_CSR14, 0); 895 896 /* turn association led off */ 897 rt2560_update_led(sc, 0, 0); 898 } 899 break; 900 901 case IEEE80211_S_SCAN: 902 rt2560_set_chan(sc, ic->ic_curchan); 903 callout_reset(&sc->scan_ch, (sc->dwelltime * hz) / 1000, 904 rt2560_next_scan, sc); 905 break; 906 907 case IEEE80211_S_AUTH: 908 rt2560_set_chan(sc, ic->ic_curchan); 909 break; 910 911 case IEEE80211_S_ASSOC: 912 rt2560_set_chan(sc, ic->ic_curchan); 913 break; 914 915 case IEEE80211_S_RUN: 916 rt2560_set_chan(sc, ic->ic_curchan); 917 918 ni = ic->ic_bss; 919 920 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 921 rt2560_update_plcp(sc); 922 rt2560_set_basicrates(sc); 923 rt2560_set_bssid(sc, ni->ni_bssid); 924 } 925 926 if (ic->ic_opmode == IEEE80211_M_HOSTAP || 927 ic->ic_opmode == IEEE80211_M_IBSS) { 928 m = ieee80211_beacon_alloc(ic, ni, &sc->sc_bo); 929 if (m == NULL) { 930 aprint_error_dev(sc->sc_dev, "could not allocate beacon\n"); 931 error = ENOBUFS; 932 break; 933 } 934 935 ieee80211_ref_node(ni); 936 error = rt2560_tx_bcn(sc, m, ni); 937 if (error != 0) 938 break; 939 } 940 941 /* turn association led on */ 942 rt2560_update_led(sc, 1, 0); 943 944 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 945 callout_reset(&sc->rssadapt_ch, hz / 10, 946 rt2560_update_rssadapt, sc); 947 rt2560_enable_tsf_sync(sc); 948 } 949 break; 950 } 951 952 return (error != 0) ? error : sc->sc_newstate(ic, nstate, arg); 953} 954 955/* 956 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or 957 * 93C66). 958 */ 959uint16_t 960rt2560_eeprom_read(struct rt2560_softc *sc, uint8_t addr) 961{ 962 uint32_t tmp; 963 uint16_t val; 964 int n; 965 966 /* clock C once before the first command */ 967 RT2560_EEPROM_CTL(sc, 0); 968 969 RT2560_EEPROM_CTL(sc, RT2560_S); 970 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_C); 971 RT2560_EEPROM_CTL(sc, RT2560_S); 972 973 /* write start bit (1) */ 974 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D); 975 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D | RT2560_C); 976 977 /* write READ opcode (10) */ 978 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D); 979 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D | RT2560_C); 980 RT2560_EEPROM_CTL(sc, RT2560_S); 981 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_C); 982 983 /* write address (A5-A0 or A7-A0) */ 984 n = (RAL_READ(sc, RT2560_CSR21) & RT2560_93C46) ? 5 : 7; 985 for (; n >= 0; n--) { 986 RT2560_EEPROM_CTL(sc, RT2560_S | 987 (((addr >> n) & 1) << RT2560_SHIFT_D)); 988 RT2560_EEPROM_CTL(sc, RT2560_S | 989 (((addr >> n) & 1) << RT2560_SHIFT_D) | RT2560_C); 990 } 991 992 RT2560_EEPROM_CTL(sc, RT2560_S); 993 994 /* read data Q15-Q0 */ 995 val = 0; 996 for (n = 15; n >= 0; n--) { 997 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_C); 998 tmp = RAL_READ(sc, RT2560_CSR21); 999 val |= ((tmp & RT2560_Q) >> RT2560_SHIFT_Q) << n; 1000 RT2560_EEPROM_CTL(sc, RT2560_S); 1001 } 1002 1003 RT2560_EEPROM_CTL(sc, 0); 1004 1005 /* clear Chip Select and clock C */ 1006 RT2560_EEPROM_CTL(sc, RT2560_S); 1007 RT2560_EEPROM_CTL(sc, 0); 1008 RT2560_EEPROM_CTL(sc, RT2560_C); 1009 1010 return val; 1011} 1012 1013/* 1014 * Some frames were processed by the hardware cipher engine and are ready for 1015 * transmission. 1016 */ 1017void 1018rt2560_encryption_intr(struct rt2560_softc *sc) 1019{ 1020 struct rt2560_tx_desc *desc; 1021 int hw; 1022 1023 /* retrieve last descriptor index processed by cipher engine */ 1024 hw = (RAL_READ(sc, RT2560_SECCSR1) - sc->txq.physaddr) / 1025 RT2560_TX_DESC_SIZE; 1026 1027 for (; sc->txq.next_encrypt != hw;) { 1028 desc = &sc->txq.desc[sc->txq.next_encrypt]; 1029 1030 bus_dmamap_sync(sc->sc_dmat, sc->txq.map, 1031 sc->txq.next_encrypt * RT2560_TX_DESC_SIZE, 1032 RT2560_TX_DESC_SIZE, BUS_DMASYNC_POSTREAD); 1033 1034 if (le32toh(desc->flags) & 1035 (RT2560_TX_BUSY | RT2560_TX_CIPHER_BUSY)) 1036 break; 1037 1038 /* for TKIP, swap eiv field to fix a bug in ASIC */ 1039 if ((le32toh(desc->flags) & RT2560_TX_CIPHER_MASK) == 1040 RT2560_TX_CIPHER_TKIP) 1041 desc->eiv = bswap32(desc->eiv); 1042 1043 /* mark the frame ready for transmission */ 1044 desc->flags |= htole32(RT2560_TX_BUSY | RT2560_TX_VALID); 1045 1046 bus_dmamap_sync(sc->sc_dmat, sc->txq.map, 1047 sc->txq.next_encrypt * RT2560_TX_DESC_SIZE, 1048 RT2560_TX_DESC_SIZE, BUS_DMASYNC_PREWRITE); 1049 1050 DPRINTFN(15, ("encryption done idx=%u\n", 1051 sc->txq.next_encrypt)); 1052 1053 sc->txq.next_encrypt = 1054 (sc->txq.next_encrypt + 1) % RT2560_TX_RING_COUNT; 1055 } 1056 1057 /* kick Tx */ 1058 RAL_WRITE(sc, RT2560_TXCSR0, RT2560_KICK_TX); 1059} 1060 1061void 1062rt2560_tx_intr(struct rt2560_softc *sc) 1063{ 1064 struct ieee80211com *ic = &sc->sc_ic; 1065 struct ifnet *ifp = ic->ic_ifp; 1066 struct rt2560_tx_desc *desc; 1067 struct rt2560_tx_data *data; 1068 struct rt2560_node *rn; 1069 int s; 1070 1071 s = splnet(); 1072 1073 for (;;) { 1074 desc = &sc->txq.desc[sc->txq.next]; 1075 data = &sc->txq.data[sc->txq.next]; 1076 1077 bus_dmamap_sync(sc->sc_dmat, sc->txq.map, 1078 sc->txq.next * RT2560_TX_DESC_SIZE, RT2560_TX_DESC_SIZE, 1079 BUS_DMASYNC_POSTREAD); 1080 1081 if ((le32toh(desc->flags) & RT2560_TX_BUSY) || 1082 (le32toh(desc->flags) & RT2560_TX_CIPHER_BUSY) || 1083 !(le32toh(desc->flags) & RT2560_TX_VALID)) 1084 break; 1085 1086 rn = (struct rt2560_node *)data->ni; 1087 1088 switch (le32toh(desc->flags) & RT2560_TX_RESULT_MASK) { 1089 case RT2560_TX_SUCCESS: 1090 DPRINTFN(10, ("data frame sent successfully\n")); 1091 if (data->id.id_node != NULL) { 1092 ieee80211_rssadapt_raise_rate(ic, 1093 &rn->rssadapt, &data->id); 1094 } 1095 if_statinc(ifp, if_opackets); 1096 break; 1097 1098 case RT2560_TX_SUCCESS_RETRY: 1099 DPRINTFN(9, ("data frame sent after %u retries\n", 1100 (le32toh(desc->flags) >> 5) & 0x7)); 1101 if_statinc(ifp, if_opackets); 1102 break; 1103 1104 case RT2560_TX_FAIL_RETRY: 1105 DPRINTFN(9, ("sending data frame failed (too much " 1106 "retries)\n")); 1107 if (data->id.id_node != NULL) { 1108 ieee80211_rssadapt_lower_rate(ic, data->ni, 1109 &rn->rssadapt, &data->id); 1110 } 1111 if_statinc(ifp, if_oerrors); 1112 break; 1113 1114 case RT2560_TX_FAIL_INVALID: 1115 case RT2560_TX_FAIL_OTHER: 1116 default: 1117 aprint_error_dev(sc->sc_dev, 1118 "sending data frame failed 0x%08x\n", 1119 le32toh(desc->flags)); 1120 if_statinc(ifp, if_oerrors); 1121 } 1122 1123 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1124 data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 1125 bus_dmamap_unload(sc->sc_dmat, data->map); 1126 m_freem(data->m); 1127 data->m = NULL; 1128 ieee80211_free_node(data->ni); 1129 data->ni = NULL; 1130 1131 /* descriptor is no longer valid */ 1132 desc->flags &= ~htole32(RT2560_TX_VALID); 1133 1134 bus_dmamap_sync(sc->sc_dmat, sc->txq.map, 1135 sc->txq.next * RT2560_TX_DESC_SIZE, RT2560_TX_DESC_SIZE, 1136 BUS_DMASYNC_PREWRITE); 1137 1138 DPRINTFN(15, ("tx done idx=%u\n", sc->txq.next)); 1139 1140 sc->txq.queued--; 1141 sc->txq.next = (sc->txq.next + 1) % RT2560_TX_RING_COUNT; 1142 } 1143 1144 sc->sc_tx_timer = 0; 1145 ifp->if_flags &= ~IFF_OACTIVE; 1146 rt2560_start(ifp); /* in softint */ 1147 1148 splx(s); 1149} 1150 1151void 1152rt2560_prio_intr(struct rt2560_softc *sc) 1153{ 1154 struct ieee80211com *ic = &sc->sc_ic; 1155 struct ifnet *ifp = ic->ic_ifp; 1156 struct rt2560_tx_desc *desc; 1157 struct rt2560_tx_data *data; 1158 int s; 1159 1160 s = splnet(); 1161 1162 for (;;) { 1163 desc = &sc->prioq.desc[sc->prioq.next]; 1164 data = &sc->prioq.data[sc->prioq.next]; 1165 1166 bus_dmamap_sync(sc->sc_dmat, sc->prioq.map, 1167 sc->prioq.next * RT2560_TX_DESC_SIZE, RT2560_TX_DESC_SIZE, 1168 BUS_DMASYNC_POSTREAD); 1169 1170 if ((le32toh(desc->flags) & RT2560_TX_BUSY) || 1171 !(le32toh(desc->flags) & RT2560_TX_VALID)) 1172 break; 1173 1174 switch (le32toh(desc->flags) & RT2560_TX_RESULT_MASK) { 1175 case RT2560_TX_SUCCESS: 1176 DPRINTFN(10, ("mgt frame sent successfully\n")); 1177 break; 1178 1179 case RT2560_TX_SUCCESS_RETRY: 1180 DPRINTFN(9, ("mgt frame sent after %u retries\n", 1181 (le32toh(desc->flags) >> 5) & 0x7)); 1182 break; 1183 1184 case RT2560_TX_FAIL_RETRY: 1185 DPRINTFN(9, ("sending mgt frame failed (too much " 1186 "retries)\n")); 1187 break; 1188 1189 case RT2560_TX_FAIL_INVALID: 1190 case RT2560_TX_FAIL_OTHER: 1191 default: 1192 aprint_error_dev(sc->sc_dev, "sending mgt frame failed 0x%08x\n", 1193 le32toh(desc->flags)); 1194 } 1195 1196 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1197 data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 1198 bus_dmamap_unload(sc->sc_dmat, data->map); 1199 m_freem(data->m); 1200 data->m = NULL; 1201 ieee80211_free_node(data->ni); 1202 data->ni = NULL; 1203 1204 /* descriptor is no longer valid */ 1205 desc->flags &= ~htole32(RT2560_TX_VALID); 1206 1207 bus_dmamap_sync(sc->sc_dmat, sc->prioq.map, 1208 sc->prioq.next * RT2560_TX_DESC_SIZE, RT2560_TX_DESC_SIZE, 1209 BUS_DMASYNC_PREWRITE); 1210 1211 DPRINTFN(15, ("prio done idx=%u\n", sc->prioq.next)); 1212 1213 sc->prioq.queued--; 1214 sc->prioq.next = (sc->prioq.next + 1) % RT2560_PRIO_RING_COUNT; 1215 } 1216 1217 sc->sc_tx_timer = 0; 1218 ifp->if_flags &= ~IFF_OACTIVE; 1219 rt2560_start(ifp); /* in softint */ 1220 1221 splx(s); 1222} 1223 1224/* 1225 * Some frames were processed by the hardware cipher engine and are ready for 1226 * transmission to the IEEE802.11 layer. 1227 */ 1228void 1229rt2560_decryption_intr(struct rt2560_softc *sc) 1230{ 1231 struct ieee80211com *ic = &sc->sc_ic; 1232 struct ifnet *ifp = ic->ic_ifp; 1233 struct rt2560_rx_desc *desc; 1234 struct rt2560_rx_data *data; 1235 struct rt2560_node *rn; 1236 struct ieee80211_frame *wh; 1237 struct ieee80211_node *ni; 1238 struct mbuf *mnew, *m; 1239 int hw, error, s; 1240 1241 /* retrieve last descriptor index processed by cipher engine */ 1242 hw = (RAL_READ(sc, RT2560_SECCSR0) - sc->rxq.physaddr) / 1243 RT2560_RX_DESC_SIZE; 1244 1245 for (; sc->rxq.cur_decrypt != hw;) { 1246 desc = &sc->rxq.desc[sc->rxq.cur_decrypt]; 1247 data = &sc->rxq.data[sc->rxq.cur_decrypt]; 1248 1249 bus_dmamap_sync(sc->sc_dmat, sc->rxq.map, 1250 sc->rxq.cur_decrypt * RT2560_TX_DESC_SIZE, 1251 RT2560_TX_DESC_SIZE, BUS_DMASYNC_POSTREAD); 1252 1253 if (le32toh(desc->flags) & 1254 (RT2560_RX_BUSY | RT2560_RX_CIPHER_BUSY)) 1255 break; 1256 1257 if (data->drop) { 1258 if_statinc(ifp, if_ierrors); 1259 goto skip; 1260 } 1261 1262 if ((le32toh(desc->flags) & RT2560_RX_CIPHER_MASK) != 0 && 1263 (le32toh(desc->flags) & RT2560_RX_ICV_ERROR)) { 1264 if_statinc(ifp, if_ierrors); 1265 goto skip; 1266 } 1267 1268 /* 1269 * Try to allocate a new mbuf for this ring element and load it 1270 * before processing the current mbuf. If the ring element 1271 * cannot be loaded, drop the received packet and reuse the old 1272 * mbuf. In the unlikely case that the old mbuf can't be 1273 * reloaded either, explicitly panic. 1274 */ 1275 MGETHDR(mnew, M_DONTWAIT, MT_DATA); 1276 if (mnew == NULL) { 1277 if_statinc(ifp, if_ierrors); 1278 goto skip; 1279 } 1280 1281 MCLGET(mnew, M_DONTWAIT); 1282 if (!(mnew->m_flags & M_EXT)) { 1283 m_freem(mnew); 1284 if_statinc(ifp, if_ierrors); 1285 goto skip; 1286 } 1287 1288 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1289 data->map->dm_mapsize, BUS_DMASYNC_POSTREAD); 1290 bus_dmamap_unload(sc->sc_dmat, data->map); 1291 1292 error = bus_dmamap_load(sc->sc_dmat, data->map, 1293 mtod(mnew, void *), MCLBYTES, NULL, BUS_DMA_NOWAIT); 1294 if (error != 0) { 1295 m_freem(mnew); 1296 1297 /* try to reload the old mbuf */ 1298 error = bus_dmamap_load(sc->sc_dmat, data->map, 1299 mtod(data->m, void *), MCLBYTES, NULL, 1300 BUS_DMA_NOWAIT); 1301 if (error != 0) { 1302 /* very unlikely that it will fail... */ 1303 panic("%s: could not load old rx mbuf", 1304 device_xname(sc->sc_dev)); 1305 } 1306 /* physical address may have changed */ 1307 desc->physaddr = htole32(data->map->dm_segs->ds_addr); 1308 if_statinc(ifp, if_ierrors); 1309 goto skip; 1310 } 1311 1312 /* 1313 * New mbuf successfully loaded, update Rx ring and continue 1314 * processing. 1315 */ 1316 m = data->m; 1317 data->m = mnew; 1318 desc->physaddr = htole32(data->map->dm_segs->ds_addr); 1319 1320 /* finalize mbuf */ 1321 m_set_rcvif(m, ifp); 1322 m->m_pkthdr.len = m->m_len = 1323 (le32toh(desc->flags) >> 16) & 0xfff; 1324 1325 s = splnet(); 1326 1327 if (sc->sc_drvbpf != NULL) { 1328 struct rt2560_rx_radiotap_header *tap = &sc->sc_rxtap; 1329 uint32_t tsf_lo, tsf_hi; 1330 1331 /* get timestamp (low and high 32 bits) */ 1332 tsf_hi = RAL_READ(sc, RT2560_CSR17); 1333 tsf_lo = RAL_READ(sc, RT2560_CSR16); 1334 1335 tap->wr_tsf = 1336 htole64(((uint64_t)tsf_hi << 32) | tsf_lo); 1337 tap->wr_flags = 0; 1338 tap->wr_rate = rt2560_rxrate(desc); 1339 tap->wr_chan_freq = htole16(ic->ic_ibss_chan->ic_freq); 1340 tap->wr_chan_flags = 1341 htole16(ic->ic_ibss_chan->ic_flags); 1342 tap->wr_antenna = sc->rx_ant; 1343 tap->wr_antsignal = desc->rssi; 1344 1345 bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m, 1346 BPF_D_IN); 1347 } 1348 1349 wh = mtod(m, struct ieee80211_frame *); 1350 ni = ieee80211_find_rxnode(ic, 1351 (struct ieee80211_frame_min *)wh); 1352 1353 /* send the frame to the 802.11 layer */ 1354 ieee80211_input(ic, m, ni, desc->rssi, 0); 1355 1356 /* give rssi to the rate adatation algorithm */ 1357 rn = (struct rt2560_node *)ni; 1358 ieee80211_rssadapt_input(ic, ni, &rn->rssadapt, desc->rssi); 1359 1360 /* node is no longer needed */ 1361 ieee80211_free_node(ni); 1362 1363 splx(s); 1364 1365skip: desc->flags = htole32(RT2560_RX_BUSY); 1366 1367 bus_dmamap_sync(sc->sc_dmat, sc->rxq.map, 1368 sc->rxq.cur_decrypt * RT2560_TX_DESC_SIZE, 1369 RT2560_TX_DESC_SIZE, BUS_DMASYNC_PREWRITE); 1370 1371 DPRINTFN(15, ("decryption done idx=%u\n", sc->rxq.cur_decrypt)); 1372 1373 sc->rxq.cur_decrypt = 1374 (sc->rxq.cur_decrypt + 1) % RT2560_RX_RING_COUNT; 1375 } 1376 1377 /* 1378 * In HostAP mode, ieee80211_input() will enqueue packets in if_snd 1379 * without calling if_start(). 1380 */ 1381 s = splnet(); 1382 if (!IFQ_IS_EMPTY(&ifp->if_snd) && !(ifp->if_flags & IFF_OACTIVE)) 1383 rt2560_start(ifp); 1384 splx(s); 1385} 1386 1387/* 1388 * Some frames were received. Pass them to the hardware cipher engine before 1389 * sending them to the 802.11 layer. 1390 */ 1391void 1392rt2560_rx_intr(struct rt2560_softc *sc) 1393{ 1394 struct rt2560_rx_desc *desc; 1395 struct rt2560_rx_data *data; 1396 1397 for (;;) { 1398 desc = &sc->rxq.desc[sc->rxq.cur]; 1399 data = &sc->rxq.data[sc->rxq.cur]; 1400 1401 bus_dmamap_sync(sc->sc_dmat, sc->rxq.map, 1402 sc->rxq.cur * RT2560_RX_DESC_SIZE, RT2560_RX_DESC_SIZE, 1403 BUS_DMASYNC_POSTREAD); 1404 1405 if (le32toh(desc->flags) & 1406 (RT2560_RX_BUSY | RT2560_RX_CIPHER_BUSY)) 1407 break; 1408 1409 data->drop = 0; 1410 1411 if (le32toh(desc->flags) & 1412 (RT2560_RX_PHY_ERROR | RT2560_RX_CRC_ERROR)) { 1413 /* 1414 * This should not happen since we did not request 1415 * to receive those frames when we filled RXCSR0. 1416 */ 1417 DPRINTFN(5, ("PHY or CRC error flags 0x%08x\n", 1418 le32toh(desc->flags))); 1419 data->drop = 1; 1420 } 1421 1422 if (((le32toh(desc->flags) >> 16) & 0xfff) > MCLBYTES) { 1423 DPRINTFN(5, ("bad length\n")); 1424 data->drop = 1; 1425 } 1426 1427 /* mark the frame for decryption */ 1428 desc->flags |= htole32(RT2560_RX_CIPHER_BUSY); 1429 1430 bus_dmamap_sync(sc->sc_dmat, sc->rxq.map, 1431 sc->rxq.cur * RT2560_RX_DESC_SIZE, RT2560_RX_DESC_SIZE, 1432 BUS_DMASYNC_PREWRITE); 1433 1434 DPRINTFN(15, ("rx done idx=%u\n", sc->rxq.cur)); 1435 1436 sc->rxq.cur = (sc->rxq.cur + 1) % RT2560_RX_RING_COUNT; 1437 } 1438 1439 /* kick decrypt */ 1440 RAL_WRITE(sc, RT2560_SECCSR0, RT2560_KICK_DECRYPT); 1441} 1442 1443/* 1444 * This function is called periodically in IBSS mode when a new beacon must be 1445 * sent out. 1446 */ 1447static void 1448rt2560_beacon_expire(struct rt2560_softc *sc) 1449{ 1450 struct ieee80211com *ic = &sc->sc_ic; 1451 struct rt2560_tx_data *data; 1452 1453 if (ic->ic_opmode != IEEE80211_M_IBSS && 1454 ic->ic_opmode != IEEE80211_M_HOSTAP) 1455 return; 1456 1457 data = &sc->bcnq.data[sc->bcnq.next]; 1458 1459 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1460 data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE); 1461 bus_dmamap_unload(sc->sc_dmat, data->map); 1462 1463 ieee80211_beacon_update(ic, data->ni, &sc->sc_bo, data->m, 1); 1464 1465 bpf_mtap3(ic->ic_rawbpf, data->m, BPF_D_OUT); 1466 rt2560_tx_bcn(sc, data->m, data->ni); 1467 1468 DPRINTFN(15, ("beacon expired\n")); 1469 1470 sc->bcnq.next = (sc->bcnq.next + 1) % RT2560_BEACON_RING_COUNT; 1471} 1472 1473static void 1474rt2560_wakeup_expire(struct rt2560_softc *sc) 1475{ 1476 DPRINTFN(15, ("wakeup expired\n")); 1477} 1478 1479int 1480rt2560_intr(void *arg) 1481{ 1482 struct rt2560_softc *sc = arg; 1483 struct ifnet *ifp = &sc->sc_if; 1484 uint32_t r; 1485 1486 if (!device_is_active(sc->sc_dev)) 1487 return 0; 1488 1489 if ((r = RAL_READ(sc, RT2560_CSR7)) == 0) 1490 return 0; /* not for us */ 1491 1492 /* disable interrupts */ 1493 RAL_WRITE(sc, RT2560_CSR8, 0xffffffff); 1494 1495 /* don't re-enable interrupts if we're shutting down */ 1496 if (!(ifp->if_flags & IFF_RUNNING)) 1497 return 0; 1498 1499 softint_schedule(sc->sc_soft_ih); 1500 return 1; 1501} 1502 1503static void 1504rt2560_softintr(void *arg) 1505{ 1506 struct rt2560_softc *sc = arg; 1507 struct ifnet *ifp = &sc->sc_if; 1508 uint32_t r; 1509 1510 if (!device_is_active(sc->sc_dev) || !(ifp->if_flags & IFF_RUNNING)) 1511 return; 1512 1513 if ((r = RAL_READ(sc, RT2560_CSR7)) == 0) 1514 goto out; 1515 1516 /* acknowledge interrupts */ 1517 RAL_WRITE(sc, RT2560_CSR7, r); 1518 1519 if (r & RT2560_BEACON_EXPIRE) 1520 rt2560_beacon_expire(sc); 1521 1522 if (r & RT2560_WAKEUP_EXPIRE) 1523 rt2560_wakeup_expire(sc); 1524 1525 if (r & RT2560_ENCRYPTION_DONE) 1526 rt2560_encryption_intr(sc); 1527 1528 if (r & RT2560_TX_DONE) 1529 rt2560_tx_intr(sc); 1530 1531 if (r & RT2560_PRIO_DONE) 1532 rt2560_prio_intr(sc); 1533 1534 if (r & RT2560_DECRYPTION_DONE) 1535 rt2560_decryption_intr(sc); 1536 1537 if (r & RT2560_RX_DONE) 1538 rt2560_rx_intr(sc); 1539 1540out: 1541 /* re-enable interrupts */ 1542 RAL_WRITE(sc, RT2560_CSR8, RT2560_INTR_MASK); 1543} 1544 1545/* quickly determine if a given rate is CCK or OFDM */ 1546#define RAL_RATE_IS_OFDM(rate) ((rate) >= 12 && (rate) != 22) 1547 1548#define RAL_ACK_SIZE 14 /* 10 + 4(FCS) */ 1549#define RAL_CTS_SIZE 14 /* 10 + 4(FCS) */ 1550 1551#define RAL_SIFS 10 /* us */ 1552 1553#define RT2560_RXTX_TURNAROUND 10 /* us */ 1554 1555/* 1556 * This function is only used by the Rx radiotap code. It returns the rate at 1557 * which a given frame was received. 1558 */ 1559static uint8_t 1560rt2560_rxrate(struct rt2560_rx_desc *desc) 1561{ 1562 if (le32toh(desc->flags) & RT2560_RX_OFDM) { 1563 /* reverse function of rt2560_plcp_signal */ 1564 switch (desc->rate) { 1565 case 0xb: return 12; 1566 case 0xf: return 18; 1567 case 0xa: return 24; 1568 case 0xe: return 36; 1569 case 0x9: return 48; 1570 case 0xd: return 72; 1571 case 0x8: return 96; 1572 case 0xc: return 108; 1573 } 1574 } else { 1575 if (desc->rate == 10) 1576 return 2; 1577 if (desc->rate == 20) 1578 return 4; 1579 if (desc->rate == 55) 1580 return 11; 1581 if (desc->rate == 110) 1582 return 22; 1583 } 1584 return 2; /* should not get there */ 1585} 1586 1587/* 1588 * Return the expected ack rate for a frame transmitted at rate `rate'. 1589 * XXX: this should depend on the destination node basic rate set. 1590 */ 1591static int 1592rt2560_ack_rate(struct ieee80211com *ic, int rate) 1593{ 1594 switch (rate) { 1595 /* CCK rates */ 1596 case 2: 1597 return 2; 1598 case 4: 1599 case 11: 1600 case 22: 1601 return (ic->ic_curmode == IEEE80211_MODE_11B) ? 4 : rate; 1602 1603 /* OFDM rates */ 1604 case 12: 1605 case 18: 1606 return 12; 1607 case 24: 1608 case 36: 1609 return 24; 1610 case 48: 1611 case 72: 1612 case 96: 1613 case 108: 1614 return 48; 1615 } 1616 1617 /* default to 1Mbps */ 1618 return 2; 1619} 1620 1621/* 1622 * Compute the duration (in us) needed to transmit `len' bytes at rate `rate'. 1623 * The function automatically determines the operating mode depending on the 1624 * given rate. `flags' indicates whether short preamble is in use or not. 1625 */ 1626static uint16_t 1627rt2560_txtime(int len, int rate, uint32_t flags) 1628{ 1629 uint16_t txtime; 1630 1631 if (RAL_RATE_IS_OFDM(rate)) { 1632 /* IEEE Std 802.11a-1999, pp. 37 */ 1633 txtime = (8 + 4 * len + 3 + rate - 1) / rate; 1634 txtime = 16 + 4 + 4 * txtime + 6; 1635 } else { 1636 /* IEEE Std 802.11b-1999, pp. 28 */ 1637 txtime = (16 * len + rate - 1) / rate; 1638 if (rate != 2 && (flags & IEEE80211_F_SHPREAMBLE)) 1639 txtime += 72 + 24; 1640 else 1641 txtime += 144 + 48; 1642 } 1643 return txtime; 1644} 1645 1646static uint8_t 1647rt2560_plcp_signal(int rate) 1648{ 1649 switch (rate) { 1650 /* CCK rates (returned values are device-dependent) */ 1651 case 2: return 0x0; 1652 case 4: return 0x1; 1653 case 11: return 0x2; 1654 case 22: return 0x3; 1655 1656 /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ 1657 case 12: return 0xb; 1658 case 18: return 0xf; 1659 case 24: return 0xa; 1660 case 36: return 0xe; 1661 case 48: return 0x9; 1662 case 72: return 0xd; 1663 case 96: return 0x8; 1664 case 108: return 0xc; 1665 1666 /* unsupported rates (should not get there) */ 1667 default: return 0xff; 1668 } 1669} 1670 1671static void 1672rt2560_setup_tx_desc(struct rt2560_softc *sc, struct rt2560_tx_desc *desc, 1673 uint32_t flags, int len, int rate, int encrypt, bus_addr_t physaddr) 1674{ 1675 struct ieee80211com *ic = &sc->sc_ic; 1676 uint16_t plcp_length; 1677 int remainder; 1678 1679 desc->flags = htole32(flags); 1680 desc->flags |= htole32(len << 16); 1681 desc->flags |= encrypt ? htole32(RT2560_TX_CIPHER_BUSY) : 1682 htole32(RT2560_TX_BUSY | RT2560_TX_VALID); 1683 1684 desc->physaddr = htole32(physaddr); 1685 desc->wme = htole16( 1686 RT2560_AIFSN(2) | 1687 RT2560_LOGCWMIN(3) | 1688 RT2560_LOGCWMAX(8)); 1689 1690 /* setup PLCP fields */ 1691 desc->plcp_signal = rt2560_plcp_signal(rate); 1692 desc->plcp_service = 4; 1693 1694 len += IEEE80211_CRC_LEN; 1695 if (RAL_RATE_IS_OFDM(rate)) { 1696 desc->flags |= htole32(RT2560_TX_OFDM); 1697 1698 plcp_length = len & 0xfff; 1699 desc->plcp_length_hi = plcp_length >> 6; 1700 desc->plcp_length_lo = plcp_length & 0x3f; 1701 } else { 1702 plcp_length = (16 * len + rate - 1) / rate; 1703 if (rate == 22) { 1704 remainder = (16 * len) % 22; 1705 if (remainder != 0 && remainder < 7) 1706 desc->plcp_service |= RT2560_PLCP_LENGEXT; 1707 } 1708 desc->plcp_length_hi = plcp_length >> 8; 1709 desc->plcp_length_lo = plcp_length & 0xff; 1710 1711 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1712 desc->plcp_signal |= 0x08; 1713 } 1714} 1715 1716static int 1717rt2560_tx_bcn(struct rt2560_softc *sc, struct mbuf *m0, 1718 struct ieee80211_node *ni) 1719{ 1720 struct rt2560_tx_desc *desc; 1721 struct rt2560_tx_data *data; 1722 int rate, error; 1723 1724 desc = &sc->bcnq.desc[sc->bcnq.cur]; 1725 data = &sc->bcnq.data[sc->bcnq.cur]; 1726 1727 rate = IEEE80211_IS_CHAN_5GHZ(ni->ni_chan) ? 12 : 2; 1728 1729 error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, 1730 BUS_DMA_NOWAIT); 1731 if (error != 0) { 1732 aprint_error_dev(sc->sc_dev, "could not map mbuf (error %d)\n", 1733 error); 1734 m_freem(m0); 1735 return error; 1736 } 1737 1738 data->m = m0; 1739 data->ni = ni; 1740 1741 rt2560_setup_tx_desc(sc, desc, RT2560_TX_IFS_NEWBACKOFF | 1742 RT2560_TX_TIMESTAMP, m0->m_pkthdr.len, rate, 0, 1743 data->map->dm_segs->ds_addr); 1744 1745 bus_dmamap_sync(sc->sc_dmat, data->map, 0, data->map->dm_mapsize, 1746 BUS_DMASYNC_PREWRITE); 1747 bus_dmamap_sync(sc->sc_dmat, sc->bcnq.map, 1748 sc->bcnq.cur * RT2560_TX_DESC_SIZE, RT2560_TX_DESC_SIZE, 1749 BUS_DMASYNC_PREWRITE); 1750 1751 return 0; 1752} 1753 1754static int 1755rt2560_tx_mgt(struct rt2560_softc *sc, struct mbuf *m0, 1756 struct ieee80211_node *ni) 1757{ 1758 struct ieee80211com *ic = &sc->sc_ic; 1759 struct rt2560_tx_desc *desc; 1760 struct rt2560_tx_data *data; 1761 struct ieee80211_frame *wh; 1762 struct ieee80211_key *k; 1763 uint16_t dur; 1764 uint32_t flags = 0; 1765 int rate, error; 1766 1767 desc = &sc->prioq.desc[sc->prioq.cur]; 1768 data = &sc->prioq.data[sc->prioq.cur]; 1769 1770 rate = IEEE80211_IS_CHAN_5GHZ(ni->ni_chan) ? 12 : 2; 1771 1772 wh = mtod(m0, struct ieee80211_frame *); 1773 1774 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1775 k = ieee80211_crypto_encap(ic, ni, m0); 1776 if (k == NULL) { 1777 m_freem(m0); 1778 return ENOBUFS; 1779 } 1780 1781 /* packet header may have moved, reset our local pointer */ 1782 wh = mtod(m0, struct ieee80211_frame *); 1783 } 1784 1785 error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, 1786 BUS_DMA_NOWAIT); 1787 if (error != 0) { 1788 aprint_error_dev(sc->sc_dev, "could not map mbuf (error %d)\n", 1789 error); 1790 m_freem(m0); 1791 return error; 1792 } 1793 1794 if (sc->sc_drvbpf != NULL) { 1795 struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap; 1796 1797 tap->wt_flags = 0; 1798 tap->wt_rate = rate; 1799 tap->wt_chan_freq = htole16(ic->ic_ibss_chan->ic_freq); 1800 tap->wt_chan_flags = htole16(ic->ic_ibss_chan->ic_flags); 1801 tap->wt_antenna = sc->tx_ant; 1802 1803 bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0, BPF_D_OUT); 1804 } 1805 1806 data->m = m0; 1807 data->ni = ni; 1808 1809 wh = mtod(m0, struct ieee80211_frame *); 1810 1811 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1812 flags |= RT2560_TX_ACK; 1813 1814 dur = rt2560_txtime(RAL_ACK_SIZE, rate, ic->ic_flags) + 1815 RAL_SIFS; 1816 *(uint16_t *)wh->i_dur = htole16(dur); 1817 1818 /* tell hardware to add timestamp for probe responses */ 1819 if ((wh->i_fc[0] & 1820 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 1821 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) 1822 flags |= RT2560_TX_TIMESTAMP; 1823 } 1824 1825 rt2560_setup_tx_desc(sc, desc, flags, m0->m_pkthdr.len, rate, 0, 1826 data->map->dm_segs->ds_addr); 1827 1828 bus_dmamap_sync(sc->sc_dmat, data->map, 0, data->map->dm_mapsize, 1829 BUS_DMASYNC_PREWRITE); 1830 bus_dmamap_sync(sc->sc_dmat, sc->prioq.map, 1831 sc->prioq.cur * RT2560_TX_DESC_SIZE, RT2560_TX_DESC_SIZE, 1832 BUS_DMASYNC_PREWRITE); 1833 1834 DPRINTFN(10, ("sending mgt frame len=%u idx=%u rate=%u\n", 1835 m0->m_pkthdr.len, sc->prioq.cur, rate)); 1836 1837 /* kick prio */ 1838 sc->prioq.queued++; 1839 sc->prioq.cur = (sc->prioq.cur + 1) % RT2560_PRIO_RING_COUNT; 1840 RAL_WRITE(sc, RT2560_TXCSR0, RT2560_KICK_PRIO); 1841 1842 return 0; 1843} 1844 1845/* 1846 * Build a RTS control frame. 1847 */ 1848static struct mbuf * 1849rt2560_get_rts(struct rt2560_softc *sc, struct ieee80211_frame *wh, 1850 uint16_t dur) 1851{ 1852 struct ieee80211_frame_rts *rts; 1853 struct mbuf *m; 1854 1855 MGETHDR(m, M_DONTWAIT, MT_DATA); 1856 if (m == NULL) { 1857 sc->sc_ic.ic_stats.is_tx_nobuf++; 1858 aprint_error_dev(sc->sc_dev, "could not allocate RTS frame\n"); 1859 return NULL; 1860 } 1861 1862 rts = mtod(m, struct ieee80211_frame_rts *); 1863 1864 rts->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL | 1865 IEEE80211_FC0_SUBTYPE_RTS; 1866 rts->i_fc[1] = IEEE80211_FC1_DIR_NODS; 1867 *(uint16_t *)rts->i_dur = htole16(dur); 1868 IEEE80211_ADDR_COPY(rts->i_ra, wh->i_addr1); 1869 IEEE80211_ADDR_COPY(rts->i_ta, wh->i_addr2); 1870 1871 m->m_pkthdr.len = m->m_len = sizeof (struct ieee80211_frame_rts); 1872 1873 return m; 1874} 1875 1876static int 1877rt2560_tx_data(struct rt2560_softc *sc, struct mbuf *m0, 1878 struct ieee80211_node *ni) 1879{ 1880 struct ieee80211com *ic = &sc->sc_ic; 1881 struct rt2560_tx_desc *desc; 1882 struct rt2560_tx_data *data; 1883 struct rt2560_node *rn; 1884 struct ieee80211_rateset *rs; 1885 struct ieee80211_frame *wh; 1886 struct ieee80211_key *k; 1887 struct mbuf *mnew; 1888 uint16_t dur; 1889 uint32_t flags = 0; 1890 int rate, error; 1891 1892 wh = mtod(m0, struct ieee80211_frame *); 1893 1894 if (ic->ic_fixed_rate != IEEE80211_FIXED_RATE_NONE) { 1895 rs = &ic->ic_sup_rates[ic->ic_curmode]; 1896 rate = rs->rs_rates[ic->ic_fixed_rate]; 1897 } else { 1898 rs = &ni->ni_rates; 1899 rn = (struct rt2560_node *)ni; 1900 ni->ni_txrate = ieee80211_rssadapt_choose(&rn->rssadapt, rs, 1901 wh, m0->m_pkthdr.len, -1, NULL, 0); 1902 rate = rs->rs_rates[ni->ni_txrate]; 1903 } 1904 rate &= IEEE80211_RATE_VAL; 1905 1906 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1907 k = ieee80211_crypto_encap(ic, ni, m0); 1908 if (k == NULL) { 1909 m_freem(m0); 1910 return ENOBUFS; 1911 } 1912 1913 /* packet header may have moved, reset our local pointer */ 1914 wh = mtod(m0, struct ieee80211_frame *); 1915 } 1916 1917 /* 1918 * IEEE Std 802.11-1999, pp 82: "A STA shall use an RTS/CTS exchange 1919 * for directed frames only when the length of the MPDU is greater 1920 * than the length threshold indicated by [...]" ic_rtsthreshold. 1921 */ 1922 if (!IEEE80211_IS_MULTICAST(wh->i_addr1) && 1923 m0->m_pkthdr.len > ic->ic_rtsthreshold) { 1924 struct mbuf *m; 1925 int rtsrate, ackrate; 1926 1927 rtsrate = IEEE80211_IS_CHAN_5GHZ(ni->ni_chan) ? 12 : 2; 1928 ackrate = rt2560_ack_rate(ic, rate); 1929 1930 dur = rt2560_txtime(m0->m_pkthdr.len + 4, rate, ic->ic_flags) + 1931 rt2560_txtime(RAL_CTS_SIZE, rtsrate, ic->ic_flags) + 1932 rt2560_txtime(RAL_ACK_SIZE, ackrate, ic->ic_flags) + 1933 3 * RAL_SIFS; 1934 1935 m = rt2560_get_rts(sc, wh, dur); 1936 1937 desc = &sc->txq.desc[sc->txq.cur_encrypt]; 1938 data = &sc->txq.data[sc->txq.cur_encrypt]; 1939 1940 error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m, 1941 BUS_DMA_NOWAIT); 1942 if (error != 0) { 1943 aprint_error_dev(sc->sc_dev, "could not map mbuf (error %d)\n", 1944 error); 1945 m_freem(m); 1946 m_freem(m0); 1947 return error; 1948 } 1949 1950 /* avoid multiple free() of the same node for each fragment */ 1951 ieee80211_ref_node(ni); 1952 1953 data->m = m; 1954 data->ni = ni; 1955 1956 /* RTS frames are not taken into account for rssadapt */ 1957 data->id.id_node = NULL; 1958 1959 rt2560_setup_tx_desc(sc, desc, RT2560_TX_ACK | 1960 RT2560_TX_MORE_FRAG, m->m_pkthdr.len, rtsrate, 1, 1961 data->map->dm_segs->ds_addr); 1962 1963 bus_dmamap_sync(sc->sc_dmat, data->map, 0, 1964 data->map->dm_mapsize, BUS_DMASYNC_PREWRITE); 1965 bus_dmamap_sync(sc->sc_dmat, sc->txq.map, 1966 sc->txq.cur_encrypt * RT2560_TX_DESC_SIZE, 1967 RT2560_TX_DESC_SIZE, BUS_DMASYNC_PREWRITE); 1968 1969 sc->txq.queued++; 1970 sc->txq.cur_encrypt = 1971 (sc->txq.cur_encrypt + 1) % RT2560_TX_RING_COUNT; 1972 1973 /* 1974 * IEEE Std 802.11-1999: when an RTS/CTS exchange is used, the 1975 * asynchronous data frame shall be transmitted after the CTS 1976 * frame and a SIFS period. 1977 */ 1978 flags |= RT2560_TX_LONG_RETRY | RT2560_TX_IFS_SIFS; 1979 } 1980 1981 data = &sc->txq.data[sc->txq.cur_encrypt]; 1982 desc = &sc->txq.desc[sc->txq.cur_encrypt]; 1983 1984 error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, 1985 BUS_DMA_NOWAIT); 1986 if (error != 0 && error != EFBIG) { 1987 aprint_error_dev(sc->sc_dev, "could not map mbuf (error %d)\n", 1988 error); 1989 m_freem(m0); 1990 return error; 1991 } 1992 if (error != 0) { 1993 /* too many fragments, linearize */ 1994 1995 MGETHDR(mnew, M_DONTWAIT, MT_DATA); 1996 if (mnew == NULL) { 1997 m_freem(m0); 1998 return ENOMEM; 1999 } 2000 2001 m_copy_pkthdr(mnew, m0); 2002 if (m0->m_pkthdr.len > MHLEN) { 2003 MCLGET(mnew, M_DONTWAIT); 2004 if (!(mnew->m_flags & M_EXT)) { 2005 m_freem(m0); 2006 m_freem(mnew); 2007 return ENOMEM; 2008 } 2009 } 2010 2011 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(mnew, void *)); 2012 m_freem(m0); 2013 mnew->m_len = mnew->m_pkthdr.len; 2014 m0 = mnew; 2015 2016 error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, 2017 BUS_DMA_NOWAIT); 2018 if (error != 0) { 2019 aprint_error_dev(sc->sc_dev, "could not map mbuf (error %d)\n", 2020 error); 2021 m_freem(m0); 2022 return error; 2023 } 2024 2025 /* packet header have moved, reset our local pointer */ 2026 wh = mtod(m0, struct ieee80211_frame *); 2027 } 2028 2029 if (sc->sc_drvbpf != NULL) { 2030 struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap; 2031 2032 tap->wt_flags = 0; 2033 tap->wt_rate = rate; 2034 tap->wt_chan_freq = htole16(ic->ic_ibss_chan->ic_freq); 2035 tap->wt_chan_flags = htole16(ic->ic_ibss_chan->ic_flags); 2036 tap->wt_antenna = sc->tx_ant; 2037 2038 bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0, BPF_D_OUT); 2039 } 2040 2041 data->m = m0; 2042 data->ni = ni; 2043 2044 /* remember link conditions for rate adaptation algorithm */ 2045 if (ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE) { 2046 data->id.id_len = m0->m_pkthdr.len; 2047 data->id.id_rateidx = ni->ni_txrate; 2048 data->id.id_node = ni; 2049 data->id.id_rssi = ni->ni_rssi; 2050 } else 2051 data->id.id_node = NULL; 2052 2053 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 2054 flags |= RT2560_TX_ACK; 2055 2056 dur = rt2560_txtime(RAL_ACK_SIZE, rt2560_ack_rate(ic, rate), 2057 ic->ic_flags) + RAL_SIFS; 2058 *(uint16_t *)wh->i_dur = htole16(dur); 2059 } 2060 2061 rt2560_setup_tx_desc(sc, desc, flags, m0->m_pkthdr.len, rate, 1, 2062 data->map->dm_segs->ds_addr); 2063 2064 bus_dmamap_sync(sc->sc_dmat, data->map, 0, data->map->dm_mapsize, 2065 BUS_DMASYNC_PREWRITE); 2066 bus_dmamap_sync(sc->sc_dmat, sc->txq.map, 2067 sc->txq.cur_encrypt * RT2560_TX_DESC_SIZE, RT2560_TX_DESC_SIZE, 2068 BUS_DMASYNC_PREWRITE); 2069 2070 DPRINTFN(10, ("sending data frame len=%u idx=%u rate=%u\n", 2071 m0->m_pkthdr.len, sc->txq.cur_encrypt, rate)); 2072 2073 /* kick encrypt */ 2074 sc->txq.queued++; 2075 sc->txq.cur_encrypt = (sc->txq.cur_encrypt + 1) % RT2560_TX_RING_COUNT; 2076 RAL_WRITE(sc, RT2560_SECCSR1, RT2560_KICK_ENCRYPT); 2077 2078 return 0; 2079} 2080 2081static void 2082rt2560_start(struct ifnet *ifp) 2083{ 2084 struct rt2560_softc *sc = ifp->if_softc; 2085 struct ieee80211com *ic = &sc->sc_ic; 2086 struct mbuf *m0; 2087 struct ieee80211_node *ni; 2088 struct ether_header *eh; 2089 2090 /* 2091 * net80211 may still try to send management frames even if the 2092 * IFF_RUNNING flag is not set... 2093 */ 2094 if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) 2095 return; 2096 2097 for (;;) { 2098 IF_POLL(&ic->ic_mgtq, m0); 2099 if (m0 != NULL) { 2100 if (sc->prioq.queued >= RT2560_PRIO_RING_COUNT) { 2101 ifp->if_flags |= IFF_OACTIVE; 2102 break; 2103 } 2104 IF_DEQUEUE(&ic->ic_mgtq, m0); 2105 if (m0 == NULL) 2106 break; 2107 2108 ni = M_GETCTX(m0, struct ieee80211_node *); 2109 M_CLEARCTX(m0); 2110 bpf_mtap3(ic->ic_rawbpf, m0, BPF_D_OUT); 2111 if (rt2560_tx_mgt(sc, m0, ni) != 0) 2112 break; 2113 2114 } else { 2115 if (ic->ic_state != IEEE80211_S_RUN) 2116 break; 2117 IFQ_DEQUEUE(&ifp->if_snd, m0); 2118 if (m0 == NULL) 2119 break; 2120 if (sc->txq.queued >= RT2560_TX_RING_COUNT - 1) { 2121 ifp->if_flags |= IFF_OACTIVE; 2122 break; 2123 } 2124 2125 if (m0->m_len < sizeof (struct ether_header) && 2126 !(m0 = m_pullup(m0, sizeof (struct ether_header)))) 2127 continue; 2128 2129 eh = mtod(m0, struct ether_header *); 2130 ni = ieee80211_find_txnode(ic, eh->ether_dhost); 2131 if (ni == NULL) { 2132 m_freem(m0); 2133 continue; 2134 } 2135 bpf_mtap(ifp, m0, BPF_D_OUT); 2136 2137 m0 = ieee80211_encap(ic, m0, ni); 2138 if (m0 == NULL) { 2139 ieee80211_free_node(ni); 2140 continue; 2141 } 2142 2143 bpf_mtap3(ic->ic_rawbpf, m0, BPF_D_OUT); 2144 2145 if (rt2560_tx_data(sc, m0, ni) != 0) { 2146 ieee80211_free_node(ni); 2147 if_statinc(ifp, if_oerrors); 2148 break; 2149 } 2150 } 2151 2152 sc->sc_tx_timer = 5; 2153 ifp->if_timer = 1; 2154 } 2155} 2156 2157static void 2158rt2560_watchdog(struct ifnet *ifp) 2159{ 2160 struct rt2560_softc *sc = ifp->if_softc; 2161 2162 ifp->if_timer = 0; 2163 2164 if (sc->sc_tx_timer > 0) { 2165 if (--sc->sc_tx_timer == 0) { 2166 aprint_error_dev(sc->sc_dev, "device timeout\n"); 2167 rt2560_init(ifp); 2168 if_statinc(ifp, if_oerrors); 2169 return; 2170 } 2171 ifp->if_timer = 1; 2172 } 2173 2174 ieee80211_watchdog(&sc->sc_ic); 2175} 2176 2177/* 2178 * This function allows for fast channel switching in monitor mode (used by 2179 * net-mgmt/kismet). In IBSS mode, we must explicitly reset the interface to 2180 * generate a new beacon frame. 2181 */ 2182static int 2183rt2560_reset(struct ifnet *ifp) 2184{ 2185 struct rt2560_softc *sc = ifp->if_softc; 2186 struct ieee80211com *ic = &sc->sc_ic; 2187 2188 if (ic->ic_opmode != IEEE80211_M_MONITOR) 2189 return ENETRESET; 2190 2191 rt2560_set_chan(sc, ic->ic_curchan); 2192 2193 return 0; 2194} 2195 2196int 2197rt2560_ioctl(struct ifnet *ifp, u_long cmd, void *data) 2198{ 2199 struct rt2560_softc *sc = ifp->if_softc; 2200 struct ieee80211com *ic = &sc->sc_ic; 2201 int s, error = 0; 2202 2203 s = splnet(); 2204 2205 switch (cmd) { 2206 case SIOCSIFFLAGS: 2207 if ((error = ifioctl_common(ifp, cmd, data)) != 0) 2208 break; 2209 if (ifp->if_flags & IFF_UP) { 2210 if (ifp->if_flags & IFF_RUNNING) 2211 rt2560_update_promisc(sc); 2212 else 2213 rt2560_init(ifp); 2214 } else { 2215 if (ifp->if_flags & IFF_RUNNING) 2216 rt2560_stop(ifp, 1); 2217 } 2218 break; 2219 2220 case SIOCADDMULTI: 2221 case SIOCDELMULTI: 2222 /* XXX no h/w multicast filter? --dyoung */ 2223 if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) 2224 error = 0; 2225 break; 2226 2227 case SIOCS80211CHANNEL: 2228 /* 2229 * This allows for fast channel switching in monitor mode 2230 * (used by kismet). In IBSS mode, we must explicitly reset 2231 * the interface to generate a new beacon frame. 2232 */ 2233 error = ieee80211_ioctl(ic, cmd, data); 2234 if (error == ENETRESET && 2235 ic->ic_opmode == IEEE80211_M_MONITOR) { 2236 rt2560_set_chan(sc, ic->ic_ibss_chan); 2237 error = 0; 2238 } 2239 break; 2240 2241 default: 2242 error = ieee80211_ioctl(ic, cmd, data); 2243 } 2244 2245 if (error == ENETRESET) { 2246 if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == 2247 (IFF_UP | IFF_RUNNING)) 2248 rt2560_init(ifp); 2249 error = 0; 2250 } 2251 2252 splx(s); 2253 2254 return error; 2255} 2256 2257static void 2258rt2560_bbp_write(struct rt2560_softc *sc, uint8_t reg, uint8_t val) 2259{ 2260 uint32_t tmp; 2261 int ntries; 2262 2263 for (ntries = 0; ntries < 100; ntries++) { 2264 if (!(RAL_READ(sc, RT2560_BBPCSR) & RT2560_BBP_BUSY)) 2265 break; 2266 DELAY(1); 2267 } 2268 if (ntries == 100) { 2269 aprint_error_dev(sc->sc_dev, "could not write to BBP\n"); 2270 return; 2271 } 2272 2273 tmp = RT2560_BBP_WRITE | RT2560_BBP_BUSY | reg << 8 | val; 2274 RAL_WRITE(sc, RT2560_BBPCSR, tmp); 2275 2276 DPRINTFN(15, ("BBP R%u <- 0x%02x\n", reg, val)); 2277} 2278 2279static uint8_t 2280rt2560_bbp_read(struct rt2560_softc *sc, uint8_t reg) 2281{ 2282 uint32_t val; 2283 int ntries; 2284 2285 val = RT2560_BBP_BUSY | reg << 8; 2286 RAL_WRITE(sc, RT2560_BBPCSR, val); 2287 2288 for (ntries = 0; ntries < 100; ntries++) { 2289 val = RAL_READ(sc, RT2560_BBPCSR); 2290 if (!(val & RT2560_BBP_BUSY)) 2291 return val & 0xff; 2292 DELAY(1); 2293 } 2294 2295 aprint_error_dev(sc->sc_dev, "could not read from BBP\n"); 2296 return 0; 2297} 2298 2299static void 2300rt2560_rf_write(struct rt2560_softc *sc, uint8_t reg, uint32_t val) 2301{ 2302 uint32_t tmp; 2303 int ntries; 2304 2305 for (ntries = 0; ntries < 100; ntries++) { 2306 if (!(RAL_READ(sc, RT2560_RFCSR) & RT2560_RF_BUSY)) 2307 break; 2308 DELAY(1); 2309 } 2310 if (ntries == 100) { 2311 aprint_error_dev(sc->sc_dev, "could not write to RF\n"); 2312 return; 2313 } 2314 2315 tmp = RT2560_RF_BUSY | RT2560_RF_20BIT | (val & 0xfffff) << 2 | 2316 (reg & 0x3); 2317 RAL_WRITE(sc, RT2560_RFCSR, tmp); 2318 2319 /* remember last written value in sc */ 2320 sc->rf_regs[reg] = val; 2321 2322 DPRINTFN(15, ("RF R[%u] <- 0x%05x\n", reg & 0x3, val & 0xfffff)); 2323} 2324 2325static void 2326rt2560_set_chan(struct rt2560_softc *sc, struct ieee80211_channel *c) 2327{ 2328 struct ieee80211com *ic = &sc->sc_ic; 2329 uint8_t power, tmp; 2330 u_int i, chan; 2331 2332 chan = ieee80211_chan2ieee(ic, c); 2333 if (chan == 0 || chan == IEEE80211_CHAN_ANY) 2334 return; 2335 2336 if (IEEE80211_IS_CHAN_2GHZ(c)) 2337 power = uimin(sc->txpow[chan - 1], 31); 2338 else 2339 power = 31; 2340 2341 DPRINTFN(2, ("setting channel to %u, txpower to %u\n", chan, power)); 2342 2343 switch (sc->rf_rev) { 2344 case RT2560_RF_2522: 2345 rt2560_rf_write(sc, RT2560_RF1, 0x00814); 2346 rt2560_rf_write(sc, RT2560_RF2, rt2560_rf2522_r2[chan - 1]); 2347 rt2560_rf_write(sc, RT2560_RF3, power << 7 | 0x00040); 2348 break; 2349 2350 case RT2560_RF_2523: 2351 rt2560_rf_write(sc, RT2560_RF1, 0x08804); 2352 rt2560_rf_write(sc, RT2560_RF2, rt2560_rf2523_r2[chan - 1]); 2353 rt2560_rf_write(sc, RT2560_RF3, power << 7 | 0x38044); 2354 rt2560_rf_write(sc, RT2560_RF4, 2355 (chan == 14) ? 0x00280 : 0x00286); 2356 break; 2357 2358 case RT2560_RF_2524: 2359 rt2560_rf_write(sc, RT2560_RF1, 0x0c808); 2360 rt2560_rf_write(sc, RT2560_RF2, rt2560_rf2524_r2[chan - 1]); 2361 rt2560_rf_write(sc, RT2560_RF3, power << 7 | 0x00040); 2362 rt2560_rf_write(sc, RT2560_RF4, 2363 (chan == 14) ? 0x00280 : 0x00286); 2364 break; 2365 2366 case RT2560_RF_2525: 2367 rt2560_rf_write(sc, RT2560_RF1, 0x08808); 2368 rt2560_rf_write(sc, RT2560_RF2, rt2560_rf2525_hi_r2[chan - 1]); 2369 rt2560_rf_write(sc, RT2560_RF3, power << 7 | 0x18044); 2370 rt2560_rf_write(sc, RT2560_RF4, 2371 (chan == 14) ? 0x00280 : 0x00286); 2372 2373 rt2560_rf_write(sc, RT2560_RF1, 0x08808); 2374 rt2560_rf_write(sc, RT2560_RF2, rt2560_rf2525_r2[chan - 1]); 2375 rt2560_rf_write(sc, RT2560_RF3, power << 7 | 0x18044); 2376 rt2560_rf_write(sc, RT2560_RF4, 2377 (chan == 14) ? 0x00280 : 0x00286); 2378 break; 2379 2380 case RT2560_RF_2525E: 2381 rt2560_rf_write(sc, RT2560_RF1, 0x08808); 2382 rt2560_rf_write(sc, RT2560_RF2, rt2560_rf2525e_r2[chan - 1]); 2383 rt2560_rf_write(sc, RT2560_RF3, power << 7 | 0x18044); 2384 rt2560_rf_write(sc, RT2560_RF4, 2385 (chan == 14) ? 0x00286 : 0x00282); 2386 break; 2387 2388 case RT2560_RF_2526: 2389 rt2560_rf_write(sc, RT2560_RF2, rt2560_rf2526_hi_r2[chan - 1]); 2390 rt2560_rf_write(sc, RT2560_RF4, 2391 (chan & 1) ? 0x00386 : 0x00381); 2392 rt2560_rf_write(sc, RT2560_RF1, 0x08804); 2393 2394 rt2560_rf_write(sc, RT2560_RF2, rt2560_rf2526_r2[chan - 1]); 2395 rt2560_rf_write(sc, RT2560_RF3, power << 7 | 0x18044); 2396 rt2560_rf_write(sc, RT2560_RF4, 2397 (chan & 1) ? 0x00386 : 0x00381); 2398 break; 2399 2400 /* dual-band RF */ 2401 case RT2560_RF_5222: 2402 for (i = 0; rt2560_rf5222[i].chan != chan; i++); 2403 2404 rt2560_rf_write(sc, RT2560_RF1, rt2560_rf5222[i].r1); 2405 rt2560_rf_write(sc, RT2560_RF2, rt2560_rf5222[i].r2); 2406 rt2560_rf_write(sc, RT2560_RF3, power << 7 | 0x00040); 2407 rt2560_rf_write(sc, RT2560_RF4, rt2560_rf5222[i].r4); 2408 break; 2409 } 2410 2411 if (ic->ic_opmode != IEEE80211_M_MONITOR && 2412 ic->ic_state != IEEE80211_S_SCAN) { 2413 /* set Japan filter bit for channel 14 */ 2414 tmp = rt2560_bbp_read(sc, 70); 2415 2416 tmp &= ~RT2560_JAPAN_FILTER; 2417 if (chan == 14) 2418 tmp |= RT2560_JAPAN_FILTER; 2419 2420 rt2560_bbp_write(sc, 70, tmp); 2421 2422 DELAY(1000); /* RF needs a 1ms delay here */ 2423 rt2560_disable_rf_tune(sc); 2424 2425 /* clear CRC errors */ 2426 RAL_READ(sc, RT2560_CNT0); 2427 } 2428} 2429 2430/* 2431 * Disable RF auto-tuning. 2432 */ 2433static void 2434rt2560_disable_rf_tune(struct rt2560_softc *sc) 2435{ 2436 uint32_t tmp; 2437 2438 if (sc->rf_rev != RT2560_RF_2523) { 2439 tmp = sc->rf_regs[RT2560_RF1] & ~RT2560_RF1_AUTOTUNE; 2440 rt2560_rf_write(sc, RT2560_RF1, tmp); 2441 } 2442 2443 tmp = sc->rf_regs[RT2560_RF3] & ~RT2560_RF3_AUTOTUNE; 2444 rt2560_rf_write(sc, RT2560_RF3, tmp); 2445 2446 DPRINTFN(2, ("disabling RF autotune\n")); 2447} 2448 2449/* 2450 * Refer to IEEE Std 802.11-1999 pp. 123 for more information on TSF 2451 * synchronization. 2452 */ 2453static void 2454rt2560_enable_tsf_sync(struct rt2560_softc *sc) 2455{ 2456 struct ieee80211com *ic = &sc->sc_ic; 2457 uint16_t logcwmin, preload; 2458 uint32_t tmp; 2459 2460 /* first, disable TSF synchronization */ 2461 RAL_WRITE(sc, RT2560_CSR14, 0); 2462 2463 tmp = 16 * ic->ic_bss->ni_intval; 2464 RAL_WRITE(sc, RT2560_CSR12, tmp); 2465 2466 RAL_WRITE(sc, RT2560_CSR13, 0); 2467 2468 logcwmin = 5; 2469 preload = (ic->ic_opmode == IEEE80211_M_STA) ? 384 : 1024; 2470 tmp = logcwmin << 16 | preload; 2471 RAL_WRITE(sc, RT2560_BCNOCSR, tmp); 2472 2473 /* finally, enable TSF synchronization */ 2474 tmp = RT2560_ENABLE_TSF | RT2560_ENABLE_TBCN; 2475 if (ic->ic_opmode == IEEE80211_M_STA) 2476 tmp |= RT2560_ENABLE_TSF_SYNC(1); 2477 else 2478 tmp |= RT2560_ENABLE_TSF_SYNC(2) | 2479 RT2560_ENABLE_BEACON_GENERATOR; 2480 RAL_WRITE(sc, RT2560_CSR14, tmp); 2481 2482 DPRINTF(("enabling TSF synchronization\n")); 2483} 2484 2485static void 2486rt2560_update_plcp(struct rt2560_softc *sc) 2487{ 2488 struct ieee80211com *ic = &sc->sc_ic; 2489 2490 /* no short preamble for 1Mbps */ 2491 RAL_WRITE(sc, RT2560_PLCP1MCSR, 0x00700400); 2492 2493 if (!(ic->ic_flags & IEEE80211_F_SHPREAMBLE)) { 2494 /* values taken from the reference driver */ 2495 RAL_WRITE(sc, RT2560_PLCP2MCSR, 0x00380401); 2496 RAL_WRITE(sc, RT2560_PLCP5p5MCSR, 0x00150402); 2497 RAL_WRITE(sc, RT2560_PLCP11MCSR, 0x000b8403); 2498 } else { 2499 /* same values as above or'ed 0x8 */ 2500 RAL_WRITE(sc, RT2560_PLCP2MCSR, 0x00380409); 2501 RAL_WRITE(sc, RT2560_PLCP5p5MCSR, 0x0015040a); 2502 RAL_WRITE(sc, RT2560_PLCP11MCSR, 0x000b840b); 2503 } 2504 2505 DPRINTF(("updating PLCP for %s preamble\n", 2506 (ic->ic_flags & IEEE80211_F_SHPREAMBLE) ? "short" : "long")); 2507} 2508 2509/* 2510 * IEEE 802.11a uses short slot time. Refer to IEEE Std 802.11-1999 pp. 85 to 2511 * know how these values are computed. 2512 */ 2513static void 2514rt2560_update_slot(struct ifnet *ifp) 2515{ 2516 struct rt2560_softc *sc = ifp->if_softc; 2517 struct ieee80211com *ic = &sc->sc_ic; 2518 uint8_t slottime; 2519 uint16_t sifs, pifs, difs, eifs; 2520 uint32_t tmp; 2521 2522 slottime = (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20; 2523 2524 /* define the MAC slot boundaries */ 2525 sifs = RAL_SIFS - RT2560_RXTX_TURNAROUND; 2526 pifs = sifs + slottime; 2527 difs = sifs + 2 * slottime; 2528 eifs = (ic->ic_curmode == IEEE80211_MODE_11B) ? 364 : 60; 2529 2530 tmp = RAL_READ(sc, RT2560_CSR11); 2531 tmp = (tmp & ~0x1f00) | slottime << 8; 2532 RAL_WRITE(sc, RT2560_CSR11, tmp); 2533 2534 tmp = pifs << 16 | sifs; 2535 RAL_WRITE(sc, RT2560_CSR18, tmp); 2536 2537 tmp = eifs << 16 | difs; 2538 RAL_WRITE(sc, RT2560_CSR19, tmp); 2539 2540 DPRINTF(("setting slottime to %uus\n", slottime)); 2541} 2542 2543static void 2544rt2560_set_basicrates(struct rt2560_softc *sc) 2545{ 2546 struct ieee80211com *ic = &sc->sc_ic; 2547 2548 /* update basic rate set */ 2549 if (ic->ic_curmode == IEEE80211_MODE_11B) { 2550 /* 11b basic rates: 1, 2Mbps */ 2551 RAL_WRITE(sc, RT2560_ARSP_PLCP_1, 0x3); 2552 } else if (IEEE80211_IS_CHAN_5GHZ(ic->ic_bss->ni_chan)) { 2553 /* 11a basic rates: 6, 12, 24Mbps */ 2554 RAL_WRITE(sc, RT2560_ARSP_PLCP_1, 0x150); 2555 } else { 2556 /* 11g basic rates: 1, 2, 5.5, 11, 6, 12, 24Mbps */ 2557 RAL_WRITE(sc, RT2560_ARSP_PLCP_1, 0x15f); 2558 } 2559} 2560 2561static void 2562rt2560_update_led(struct rt2560_softc *sc, int led1, int led2) 2563{ 2564 uint32_t tmp; 2565 2566 /* set ON period to 70ms and OFF period to 30ms */ 2567 tmp = led1 << 16 | led2 << 17 | 70 << 8 | 30; 2568 RAL_WRITE(sc, RT2560_LEDCSR, tmp); 2569} 2570 2571static void 2572rt2560_set_bssid(struct rt2560_softc *sc, uint8_t *bssid) 2573{ 2574 uint32_t tmp; 2575 2576 tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24; 2577 RAL_WRITE(sc, RT2560_CSR5, tmp); 2578 2579 tmp = bssid[4] | bssid[5] << 8; 2580 RAL_WRITE(sc, RT2560_CSR6, tmp); 2581 2582 DPRINTF(("setting BSSID to %s\n", ether_sprintf(bssid))); 2583} 2584 2585static void 2586rt2560_set_macaddr(struct rt2560_softc *sc, uint8_t *addr) 2587{ 2588 uint32_t tmp; 2589 2590 tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24; 2591 RAL_WRITE(sc, RT2560_CSR3, tmp); 2592 2593 tmp = addr[4] | addr[5] << 8; 2594 RAL_WRITE(sc, RT2560_CSR4, tmp); 2595 2596 DPRINTF(("setting MAC address to %s\n", ether_sprintf(addr))); 2597} 2598 2599static void 2600rt2560_get_macaddr(struct rt2560_softc *sc, uint8_t *addr) 2601{ 2602 uint32_t tmp; 2603 2604 tmp = RAL_READ(sc, RT2560_CSR3); 2605 addr[0] = tmp & 0xff; 2606 addr[1] = (tmp >> 8) & 0xff; 2607 addr[2] = (tmp >> 16) & 0xff; 2608 addr[3] = (tmp >> 24); 2609 2610 tmp = RAL_READ(sc, RT2560_CSR4); 2611 addr[4] = tmp & 0xff; 2612 addr[5] = (tmp >> 8) & 0xff; 2613} 2614 2615static void 2616rt2560_update_promisc(struct rt2560_softc *sc) 2617{ 2618 struct ifnet *ifp = &sc->sc_if; 2619 uint32_t tmp; 2620 2621 tmp = RAL_READ(sc, RT2560_RXCSR0); 2622 2623 tmp &= ~RT2560_DROP_NOT_TO_ME; 2624 if (!(ifp->if_flags & IFF_PROMISC)) 2625 tmp |= RT2560_DROP_NOT_TO_ME; 2626 2627 RAL_WRITE(sc, RT2560_RXCSR0, tmp); 2628 2629 DPRINTF(("%s promiscuous mode\n", (ifp->if_flags & IFF_PROMISC) ? 2630 "entering" : "leaving")); 2631} 2632 2633static void 2634rt2560_set_txantenna(struct rt2560_softc *sc, int antenna) 2635{ 2636 uint32_t tmp; 2637 uint8_t tx; 2638 2639 tx = rt2560_bbp_read(sc, RT2560_BBP_TX) & ~RT2560_BBP_ANTMASK; 2640 if (antenna == 1) 2641 tx |= RT2560_BBP_ANTA; 2642 else if (antenna == 2) 2643 tx |= RT2560_BBP_ANTB; 2644 else 2645 tx |= RT2560_BBP_DIVERSITY; 2646 2647 /* need to force I/Q flip for RF 2525e, 2526 and 5222 */ 2648 if (sc->rf_rev == RT2560_RF_2525E || sc->rf_rev == RT2560_RF_2526 || 2649 sc->rf_rev == RT2560_RF_5222) 2650 tx |= RT2560_BBP_FLIPIQ; 2651 2652 rt2560_bbp_write(sc, RT2560_BBP_TX, tx); 2653 2654 /* update values for CCK and OFDM in BBPCSR1 */ 2655 tmp = RAL_READ(sc, RT2560_BBPCSR1) & ~0x00070007; 2656 tmp |= (tx & 0x7) << 16 | (tx & 0x7); 2657 RAL_WRITE(sc, RT2560_BBPCSR1, tmp); 2658} 2659 2660static void 2661rt2560_set_rxantenna(struct rt2560_softc *sc, int antenna) 2662{ 2663 uint8_t rx; 2664 2665 rx = rt2560_bbp_read(sc, RT2560_BBP_RX) & ~RT2560_BBP_ANTMASK; 2666 if (antenna == 1) 2667 rx |= RT2560_BBP_ANTA; 2668 else if (antenna == 2) 2669 rx |= RT2560_BBP_ANTB; 2670 else 2671 rx |= RT2560_BBP_DIVERSITY; 2672 2673 /* need to force no I/Q flip for RF 2525e and 2526 */ 2674 if (sc->rf_rev == RT2560_RF_2525E || sc->rf_rev == RT2560_RF_2526) 2675 rx &= ~RT2560_BBP_FLIPIQ; 2676 2677 rt2560_bbp_write(sc, RT2560_BBP_RX, rx); 2678} 2679 2680static const char * 2681rt2560_get_rf(int rev) 2682{ 2683 switch (rev) { 2684 case RT2560_RF_2522: return "RT2522"; 2685 case RT2560_RF_2523: return "RT2523"; 2686 case RT2560_RF_2524: return "RT2524"; 2687 case RT2560_RF_2525: return "RT2525"; 2688 case RT2560_RF_2525E: return "RT2525e"; 2689 case RT2560_RF_2526: return "RT2526"; 2690 case RT2560_RF_5222: return "RT5222"; 2691 default: return "unknown"; 2692 } 2693} 2694 2695static void 2696rt2560_read_eeprom(struct rt2560_softc *sc) 2697{ 2698 uint16_t val; 2699 int i; 2700 2701 val = rt2560_eeprom_read(sc, RT2560_EEPROM_CONFIG0); 2702 sc->rf_rev = (val >> 11) & 0x1f; 2703 sc->hw_radio = (val >> 10) & 0x1; 2704 sc->led_mode = (val >> 6) & 0x7; 2705 sc->rx_ant = (val >> 4) & 0x3; 2706 sc->tx_ant = (val >> 2) & 0x3; 2707 sc->nb_ant = val & 0x3; 2708 2709 /* read default values for BBP registers */ 2710 for (i = 0; i < 16; i++) { 2711 val = rt2560_eeprom_read(sc, RT2560_EEPROM_BBP_BASE + i); 2712 sc->bbp_prom[i].reg = val >> 8; 2713 sc->bbp_prom[i].val = val & 0xff; 2714 } 2715 2716 /* read Tx power for all b/g channels */ 2717 for (i = 0; i < 14 / 2; i++) { 2718 val = rt2560_eeprom_read(sc, RT2560_EEPROM_TXPOWER + i); 2719 sc->txpow[i * 2] = val >> 8; 2720 sc->txpow[i * 2 + 1] = val & 0xff; 2721 } 2722} 2723 2724static int 2725rt2560_bbp_init(struct rt2560_softc *sc) 2726{ 2727#define N(a) (sizeof (a) / sizeof ((a)[0])) 2728 int i, ntries; 2729 2730 /* wait for BBP to be ready */ 2731 for (ntries = 0; ntries < 100; ntries++) { 2732 if (rt2560_bbp_read(sc, RT2560_BBP_VERSION) != 0) 2733 break; 2734 DELAY(1); 2735 } 2736 if (ntries == 100) { 2737 aprint_error_dev(sc->sc_dev, "timeout waiting for BBP\n"); 2738 return EIO; 2739 } 2740 2741 /* initialize BBP registers to default values */ 2742 for (i = 0; i < N(rt2560_def_bbp); i++) { 2743 rt2560_bbp_write(sc, rt2560_def_bbp[i].reg, 2744 rt2560_def_bbp[i].val); 2745 } 2746#if 0 2747 /* initialize BBP registers to values stored in EEPROM */ 2748 for (i = 0; i < 16; i++) { 2749 if (sc->bbp_prom[i].reg == 0xff) 2750 continue; 2751 rt2560_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val); 2752 } 2753#endif 2754 2755 return 0; 2756#undef N 2757} 2758 2759static int 2760rt2560_init(struct ifnet *ifp) 2761{ 2762#define N(a) (sizeof (a) / sizeof ((a)[0])) 2763 struct rt2560_softc *sc = ifp->if_softc; 2764 struct ieee80211com *ic = &sc->sc_ic; 2765 uint32_t tmp; 2766 int i; 2767 2768 /* for CardBus, power on the socket */ 2769 if (!(sc->sc_flags & RT2560_ENABLED)) { 2770 if (sc->sc_enable != NULL && (*sc->sc_enable)(sc) != 0) { 2771 aprint_error_dev(sc->sc_dev, "could not enable device\n"); 2772 return EIO; 2773 } 2774 sc->sc_flags |= RT2560_ENABLED; 2775 } 2776 2777 rt2560_stop(ifp, 1); 2778 2779 /* setup tx rings */ 2780 tmp = RT2560_PRIO_RING_COUNT << 24 | 2781 RT2560_ATIM_RING_COUNT << 16 | 2782 RT2560_TX_RING_COUNT << 8 | 2783 RT2560_TX_DESC_SIZE; 2784 2785 /* rings _must_ be initialized in this _exact_ order! */ 2786 RAL_WRITE(sc, RT2560_TXCSR2, tmp); 2787 RAL_WRITE(sc, RT2560_TXCSR3, sc->txq.physaddr); 2788 RAL_WRITE(sc, RT2560_TXCSR5, sc->prioq.physaddr); 2789 RAL_WRITE(sc, RT2560_TXCSR4, sc->atimq.physaddr); 2790 RAL_WRITE(sc, RT2560_TXCSR6, sc->bcnq.physaddr); 2791 2792 /* setup rx ring */ 2793 tmp = RT2560_RX_RING_COUNT << 8 | RT2560_RX_DESC_SIZE; 2794 2795 RAL_WRITE(sc, RT2560_RXCSR1, tmp); 2796 RAL_WRITE(sc, RT2560_RXCSR2, sc->rxq.physaddr); 2797 2798 /* initialize MAC registers to default values */ 2799 for (i = 0; i < N(rt2560_def_mac); i++) 2800 RAL_WRITE(sc, rt2560_def_mac[i].reg, rt2560_def_mac[i].val); 2801 2802 IEEE80211_ADDR_COPY(ic->ic_myaddr, CLLADDR(ifp->if_sadl)); 2803 rt2560_set_macaddr(sc, ic->ic_myaddr); 2804 2805 /* set basic rate set (will be updated later) */ 2806 RAL_WRITE(sc, RT2560_ARSP_PLCP_1, 0x153); 2807 2808 rt2560_update_slot(ifp); 2809 rt2560_update_plcp(sc); 2810 rt2560_update_led(sc, 0, 0); 2811 2812 RAL_WRITE(sc, RT2560_CSR1, RT2560_RESET_ASIC); 2813 RAL_WRITE(sc, RT2560_CSR1, RT2560_HOST_READY); 2814 2815 if (rt2560_bbp_init(sc) != 0) { 2816 rt2560_stop(ifp, 1); 2817 return EIO; 2818 } 2819 2820 rt2560_set_txantenna(sc, 1); 2821 rt2560_set_rxantenna(sc, 1); 2822 2823 /* set default BSS channel */ 2824 ic->ic_bss->ni_chan = ic->ic_ibss_chan; 2825 rt2560_set_chan(sc, ic->ic_bss->ni_chan); 2826 2827 /* kick Rx */ 2828 tmp = RT2560_DROP_PHY_ERROR | RT2560_DROP_CRC_ERROR; 2829 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2830 tmp |= RT2560_DROP_CTL | RT2560_DROP_VERSION_ERROR; 2831 if (ic->ic_opmode != IEEE80211_M_HOSTAP) 2832 tmp |= RT2560_DROP_TODS; 2833 if (!(ifp->if_flags & IFF_PROMISC)) 2834 tmp |= RT2560_DROP_NOT_TO_ME; 2835 } 2836 RAL_WRITE(sc, RT2560_RXCSR0, tmp); 2837 2838 /* clear old FCS and Rx FIFO errors */ 2839 RAL_READ(sc, RT2560_CNT0); 2840 RAL_READ(sc, RT2560_CNT4); 2841 2842 /* clear any pending interrupts */ 2843 RAL_WRITE(sc, RT2560_CSR7, 0xffffffff); 2844 2845 /* enable interrupts */ 2846 RAL_WRITE(sc, RT2560_CSR8, RT2560_INTR_MASK); 2847 2848 ifp->if_flags &= ~IFF_OACTIVE; 2849 ifp->if_flags |= IFF_RUNNING; 2850 2851 if (ic->ic_opmode == IEEE80211_M_MONITOR) 2852 ieee80211_new_state(ic, IEEE80211_S_RUN, -1); 2853 else 2854 ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); 2855 2856 return 0; 2857#undef N 2858} 2859 2860static void 2861rt2560_stop(struct ifnet *ifp, int disable) 2862{ 2863 struct rt2560_softc *sc = ifp->if_softc; 2864 struct ieee80211com *ic = &sc->sc_ic; 2865 2866 sc->sc_tx_timer = 0; 2867 ifp->if_timer = 0; 2868 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 2869 2870 ieee80211_new_state(ic, IEEE80211_S_INIT, -1); /* free all nodes */ 2871 2872 /* abort Tx */ 2873 RAL_WRITE(sc, RT2560_TXCSR0, RT2560_ABORT_TX); 2874 2875 /* disable Rx */ 2876 RAL_WRITE(sc, RT2560_RXCSR0, RT2560_DISABLE_RX); 2877 2878 /* reset ASIC (and thus, BBP) */ 2879 RAL_WRITE(sc, RT2560_CSR1, RT2560_RESET_ASIC); 2880 RAL_WRITE(sc, RT2560_CSR1, 0); 2881 2882 /* disable interrupts */ 2883 RAL_WRITE(sc, RT2560_CSR8, 0xffffffff); 2884 2885 /* clear any pending interrupt */ 2886 RAL_WRITE(sc, RT2560_CSR7, 0xffffffff); 2887 2888 /* reset Tx and Rx rings */ 2889 rt2560_reset_tx_ring(sc, &sc->txq); 2890 rt2560_reset_tx_ring(sc, &sc->atimq); 2891 rt2560_reset_tx_ring(sc, &sc->prioq); 2892 rt2560_reset_tx_ring(sc, &sc->bcnq); 2893 rt2560_reset_rx_ring(sc, &sc->rxq); 2894} 2895