GENERIC revision 1.110
1# $NetBSD: GENERIC,v 1.110 2022/09/29 10:10:09 riastradh Exp $ 2# 3# machine description file for GENERIC NAS 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/sandpoint/conf/std.sandpoint" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#ident "GENERIC-$Revision: 1.110 $" 26 27maxusers 32 28 29#options ALTIVEC # Include AltiVec support 30 31# Standard system options 32#options INSECURE # disable kernel security levels 33 34options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 35options KTRACE 36 37options SYSVMSG # System V message queues 38options SYSVSEM # System V semaphores 39options SYSVSHM # System V shared memory 40 41#options MODULAR # module(7) support 42#options MODULAR_DEFAULT_AUTOLOAD 43#options USERCONF # userconf(4) support 44 45#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 46options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 47 48# Alternate buffer queue strategies for better responsiveness under high 49# disk I/O load. 50#options BUFQ_READPRIO 51options BUFQ_PRIOCSCAN 52 53# Diagnostic/debugging support options 54#options DIAGNOSTIC # cheap kernel consistency checks 55#options DEBUG # expensive debugging checks/support 56options DDB 57#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 58#options TRAP_PANICWAIT 59#options PMAPCHECK 60#options PMAPDEBUG 61options MSGBUFSIZE=65536 62 63#makeoptions DEBUG="-g" 64 65# Compatibility options 66include "conf/compat_netbsd09.config" 67options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI 68#options COMPAT_386BSD_MBRPART # recognize old partition ID 69#options COMPAT_LINUX # binary compatibility with Linux 70#options COMPAT_OSSAUDIO # binary compatibility with Linux 71 72# Wedge support 73options DKWEDGE_AUTODISCOVER # Automatically add dk(4) instances 74options DKWEDGE_METHOD_GPT # Supports GPT partitions as wedges 75#options DKWEDGE_METHOD_BSDLABEL # Support disklabel entries as wedges 76#options DKWEDGE_METHOD_MBR # Support MBR partitions as wedges 77options DKWEDGE_METHOD_APPLE # Support Apple partitions as wedges 78#options DKWEDGE_METHOD_RDB # Support RDB partitions as wedges 79 80# File systems 81file-system FFS # UFS 82file-system EXT2FS # second extended file system (linux) 83#file-system LFS # log-structured file system 84file-system MFS # memory file system 85file-system NFS # Network File System client 86#file-system NTFS # Windows/NT file system (experimental) 87file-system CD9660 # ISO 9660 + Rock Ridge file system 88file-system MSDOSFS # MS-DOS file system 89file-system FDESC # /dev/fd 90file-system KERNFS # /kern 91file-system NULLFS # loopback file system 92#file-system OVERLAY # overlay file system 93file-system PROCFS # /proc 94#file-system UMAPFS # NULLFS + uid and gid remapping 95#file-system UNION # union file system 96#file-system CODA # Coda File System; also needs vcoda (below) 97file-system PTYFS # /dev/ptm support 98file-system TMPFS # Efficient memory file-system 99 100# File system options 101#options FFS_EI # FFS Endian Independent support 102#options FFS_NO_SNAPSHOT # No FFS snapshot support 103options QUOTA # legacy UFS quotas 104options QUOTA2 # new, in-filesystem UFS quotas 105options UFS_DIRHASH # UFS Large Directory Hashing 106options UFS_EXTATTR # Extended attribute support for UFS1 107options WAPBL # File system journaling support 108#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 109 # immutable) behave as system flags. 110#options DISKLABEL_EI # disklabel Endian Independent support 111options NFSSERVER # Network File System server 112 113#options NFS_BOOT_DHCP 114options NFS_BOOT_BOOTPARAM,NFS_BOOT_BOOTP 115 116# Networking options 117#options GATEWAY # packet forwarding 118options INET # IP + ICMP + TCP + UDP 119options INET6 # IPV6 120#options IPSEC # IP security 121#options IPSEC_DEBUG # debug for IP security 122#options MROUTING # IP multicast routing 123#options PIM # Protocol Independent Multicast 124#options NETATALK # AppleTalk networking protocols 125#options PPP_BSDCOMP # BSD-Compress compression support for PPP 126#options PPP_DEFLATE # Deflate compression support for PPP 127#options PPP_FILTER # Active filter support for PPP (requires BPF) 128#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 129 130#options ALTQ # Manipulate network interfaces' output queues 131#options ALTQ_BLUE # Stochastic Fair Blue 132#options ALTQ_CBQ # Class-Based Queueing 133#options ALTQ_CDNR # Diffserv Traffic Conditioner 134#options ALTQ_FIFOQ # First-In First-Out Queue 135#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 136#options ALTQ_HFSC # Hierarchical Fair Service Curve 137#options ALTQ_LOCALQ # Local queueing discipline 138#options ALTQ_PRIQ # Priority Queueing 139#options ALTQ_RED # Random Early Detection 140#options ALTQ_RIO # RED with IN/OUT 141#options ALTQ_WFQ # Weighted Fair Queueing 142 143# These options enable verbose messages for several subsystems. 144# Warning, these may compile large string tables into the kernel! 145#options PCIVERBOSE # verbose PCI device autoconfig messages 146#options MIIVERBOSE # verbose PHY autoconfig messages 147#options PCI_CONFIG_DUMP # verbosely dump PCI config space 148#options SCSIVERBOSE # human readable SCSI error messages 149#options USBVERBOSE # verbose USB device autoconfig messages 150 151# Kernel root file system and dump configuration 152config netbsd root on ? type ? 153 154# 155# Device configuration 156# 157mainbus0 at root 158cpu* at mainbus0 159 160#cfi0 at mainbus0 161#nor* at cfi? 162#flash* at nor? 163 164nhpow0 at mainbus0 # NH230/231 power,LED,buttons 165 166#options PCI_NETBSD_CONFIGURE 167pci* at mainbus0 bus ? 168pchb* at pci? dev ? function ? # PCI host bridge 169 170eumb* at mainbus0 171com0 at eumb? unit 0 # console at 0x4500 172#com1 at eumb? unit 1 173satmgr0 at eumb? unit 1 # satmgr at 0x4600 174ociic* at eumb? 175iic* at ociic? 176lmtemp* at iic? addr 0x48 # LM75 temperature sensor 177rs5c372rtc* at iic? addr 0x32 178s390rtc* at iic? addr 0x30 179pcf8563rtc* at iic? addr 0x51 180dsrtc* at iic? addr 0x68 181strtc* at iic? addr 0x68 # ST M41T80 (or compat) RTC 182 183# PCI IDE controllers - see pciide(4) for supported hardware. 184acardide* at pci? dev ? function ? # Acard IDE controllers 185cmdide* at pci? dev ? function ? # CMD tech IDE controllers 186iteide* at pci? dev ? function ? # IT Express IDE controllers 187satalink* at pci? dev ? function ? # SiI SATALink controllers 188viaide* at pci? dev ? function ? # VIA IDE controllers 189 190# ATA (IDE) bus support 191atabus* at ata? 192 193# IDE drives 194# Flags are used only with controllers that support DMA operations 195# and mode settings (e.g. some pciide controllers) 196# The lowest order four bits (rightmost digit) of the flags define the PIO 197# mode to use, the next set of four bits the DMA mode and the third set the 198# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 199# to use, and the last bit must be 1 for this setting to be used. 200# For DMA and UDMA, 0xf (1111) means 'disable'. 201# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 202# (0xc=1100, 0xa=1010, 0xf=1111) 203# 0x0000 means "use whatever the drive claims to support". 204wd* at atabus? drive ? flags 0x0000 205 206# ATAPI bus support 207atapibus* at atapi? 208 209# ATAPI devices 210# flags have the same meaning as for IDE drives. 211cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 212sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 213uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 214 215# PCI network interfaces 216ral* at pci? dev ? function ? # Ralink Technology RT25x0 802.11a/b/g 217re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S 218skc* at pci? dev ? function ? # Marvell Yukon Gigabit Ethernet 219sk* at skc? # Marvell Yukon Gigabit Ethernet 220stge* at pci? dev ? function ? # Sundance ST1023 Gigabit 221tlp* at pci? dev ? function ? # DEC Tulip and similar 222wm* at pci? dev ? function ? # Intel 8254x Gigabit Ethernet 223 224inphy* at mii? phy ? # Intel 82555 PHYs 225nsphy* at mii? phy ? # NS83840 PHYs 226rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs 227makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs 228ukphy* at mii? phy ? # generic unknown PHYs 229 230# GPIO devices 231gpio* at gpiobus? 232 233# USB Controller and Devices 234ehci* at pci? dev ? function ? # Enhanced Host Controller 235ohci* at pci? dev ? function ? # Open Host Controller 236 237# USB bus support 238usb* at ehci? 239usb* at ohci? 240 241# USB Hubs 242uhub* at usb? 243uhub* at uhub? port ? 244 245# USB HID devices 246uhidev* at uhub? port ? configuration ? interface ? # USB HID device 247uthum* at uhidev? reportid ? # TEMPerHUM sensors 248uhid* at uhidev? reportid ? # USB Generic HID 249 250# USB video 251uvideo* at uhub? # USB Video Class capture devices 252video* at videobus? 253 254# USB printer 255ulpt* at uhub? port ? configuration ? interface ? 256 257# USB Mass Storage 258umass* at uhub? port ? configuration ? interface ? 259 260ugen* at uhub? port ? configuration ? interface ? # USB Generic driver 261 262# SCSI bus support 263scsibus* at umass? 264 265# SCSI devices 266sd* at scsibus? target ? lun ? # SCSI disk drives 267cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 268 269 270# 271# Pseudo-Devices 272# 273#pseudo-device crypto # /dev/crypto device 274#pseudo-device swcrypto # software crypto implementation 275 276# disk/mass storage pseudo-devices 277#pseudo-device ccd # concatenated/striped disk devices 278#pseudo-device cgd # cryptographic disk devices 279pseudo-device fss # file system snapshot device 280#pseudo-device putter # for puffs and pud 281 282pseudo-device raid # RAIDframe disk driver 283options RAID_AUTOCONFIG # auto-configuration of RAID components 284# Options to enable various other RAIDframe RAID types. 285#options RF_INCLUDE_EVENODD=1 286#options RF_INCLUDE_RAID5_RS=1 287#options RF_INCLUDE_PARITYLOGGING=1 288#options RF_INCLUDE_CHAINDECLUSTER=1 289#options RF_INCLUDE_INTERDECLUSTER=1 290#options RF_INCLUDE_PARITY_DECLUSTERING=1 291#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 292 293pseudo-device vnd 294#options VND_COMPRESSION # compressed vnd(4) 295 296# network pseudo-devices 297pseudo-device loop 298pseudo-device bpfilter # packet filter 299pseudo-device carp # Common Address Redundancy Protocol 300#pseudo-device ppp # Point-to-Point Protocol 301#pseudo-device pppoe # PPP over Ethernet (RFC 2516) 302#pseudo-device npf # NPF packet filter 303#pseudo-device sl # Serial Line IP 304#pseudo-device tun # network tunneling over tty 305#pseudo-device tap # virtual Ethernet 306#pseudo-device gre # generic L3 over IP tunnel 307#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 308#pseudo-device faith # IPv[46] tcp relay translation i/f 309#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 310#pseudo-device vlan # IEEE 802.1q encapsulation 311#pseudo-device bridge # simple inter-network bridging 312#pseudo-device vether # Virtual Ethernet for bridge 313#pseudo-device agr # IEEE 802.3ad link aggregation 314 315# 316# accept filters 317#pseudo-device accf_data # "dataready" accept filter 318#pseudo-device accf_http # "httpready" accept filter 319 320# miscellaneous pseudo-devices 321pseudo-device pty 322pseudo-device clockctl # user control of clock subsystem 323pseudo-device ksyms # /dev/ksyms 324#pseudo-device lockstat # lock profiling 325pseudo-device swwdog # software watchdog timer -- swwdog(4) 326 327# a pseudo device needed for Coda # also needs CODA (above) 328#pseudo-device vcoda # coda minicache <-> venus comm. 329 330# userland interface to drivers, including autoconf and properties retrieval 331pseudo-device drvctl 332 333include "dev/veriexec.config" 334 335#options PAX_MPROTECT=0 # PaX mprotect(2) restrictions 336#options PAX_ASLR=0 # PaX Address Space Layout Randomization 337