1/* $NetBSD: raidctl.c,v 1.83 2024/02/10 09:21:52 andvar Exp $ */ 2 3/*- 4 * Copyright (c) 1996, 1997, 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Greg Oster 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32/* 33 * This program is a re-write of the original rf_ctrl program 34 * distributed by CMU with RAIDframe 1.1. 35 * 36 * This program is the user-land interface to the RAIDframe kernel 37 * driver in NetBSD. 38 */ 39#include <sys/cdefs.h> 40 41#ifndef lint 42__RCSID("$NetBSD: raidctl.c,v 1.83 2024/02/10 09:21:52 andvar Exp $"); 43#endif 44 45 46#include <sys/param.h> 47#include <sys/ioctl.h> 48#include <sys/stat.h> 49#include <sys/disklabel.h> 50 51#include <ctype.h> 52#include <err.h> 53#include <errno.h> 54#include <fcntl.h> 55#include <stdio.h> 56#include <stdlib.h> 57#include <string.h> 58#include <inttypes.h> 59#include <unistd.h> 60#include <util.h> 61 62#include <dev/raidframe/raidframevar.h> 63#include <dev/raidframe/raidframeio.h> 64#include "rf_configure.h" 65#include "prog_ops.h" 66 67#ifndef RAIDFRAME_REMOVE_COMPONENT 68#define RAIDFRAME_REMOVE_COMPONENT RAIDFRAME_REMOVE_HOT_SPARE 69#endif 70 71#define CONFIGURE_TEST 1 /* must be different from any raidframe ioctl */ 72 73void do_ioctl(int, u_long, void *, const char *); 74static void rf_configure(int, char*, int); 75static const char *device_status(RF_DiskStatus_t); 76static void rf_get_device_status(int); 77static void rf_output_configuration(int, const char *); 78static void get_component_number(int, char *, int *, int *); 79static void rf_fail_disk(int, char *, int); 80__dead static void usage(void); 81static void get_component_label(int, char *); 82static void set_component_label(int, char *); 83static void init_component_labels(int, int); 84static void set_autoconfig(int, int, char *); 85static void add_hot_spare(int, char *); 86static void remove_component(int, char *); 87static void rebuild_in_place(int, char *); 88static void check_status(int,int); 89static void check_parity(int,int, char *); 90static void do_meter(int, u_long); 91static void get_bar(char *, double, int); 92static void get_time_string(char *, size_t, int); 93static void rf_output_pmstat(int, int); 94static void rf_pm_configure(int, int, char *, int[]); 95static void rf_simple_create(int, int, char *[]); 96static unsigned int xstrtouint(const char *); 97 98int verbose; 99 100static const char *rootpart[] = { "No", "Force", "Soft", "*invalid*" }; 101 102static void 103get_comp(char *buf, char *arg, size_t bufsz) 104{ 105 if (getfsspecname(buf, bufsz, arg) == NULL) 106 errx(1,"%s",buf); 107} 108 109int 110main(int argc,char *argv[]) 111{ 112 int ch, i; 113 int num_options; 114 unsigned long action; 115 char config_filename[PATH_MAX]; 116 char dev_name[PATH_MAX]; 117 char name[PATH_MAX]; 118 char component[PATH_MAX]; 119 char autoconf[10]; 120 char *parityconf = NULL; 121 int parityparams[3]; 122 int do_output; 123 int do_recon; 124 int do_rewrite; 125 int raidID; 126 int serial_number; 127 struct stat st; 128 int fd; 129 int force; 130 int openmode; 131 int last_unit; 132 struct timeval tv; 133 134 num_options = 0; 135 action = 0; 136 do_output = 0; 137 do_recon = 0; 138 do_rewrite = 0; 139 serial_number = 0; 140 force = 0; 141 last_unit = 0; 142 openmode = O_RDWR; /* default to read/write */ 143 144 if (argc > 5) { 145 /* we have at least 5 args, so it might be a simplified config */ 146 147 strlcpy(name, argv[1], sizeof(name)); 148 fd = opendisk(name, openmode, dev_name, sizeof(dev_name), 0); 149 if (fd != -1) { 150 /* we were able to open the device... */ 151 if (fstat(fd, &st) == -1) 152 err(1, "stat failure on: %s", dev_name); 153 if (!S_ISBLK(st.st_mode) && !S_ISCHR(st.st_mode)) 154 err(1, "invalid device: %s", dev_name); 155 156 raidID = DISKUNIT(st.st_rdev); 157 if (strncmp(argv[2],"create",6)==0) { 158 rf_simple_create(fd,argc-3,&argv[3]); 159 160 /* set serial number, set autoconfig, init parity */ 161 162 if (gettimeofday(&tv,NULL) == -1) { 163 serial_number = 12345777; 164 } else { 165 serial_number = tv.tv_sec; 166 } 167 init_component_labels(fd, serial_number); 168 strlcpy(autoconf, "yes", sizeof(autoconf)); 169 set_autoconfig(fd, raidID, autoconf); 170 171 } else 172 usage(); 173 174 close(fd); 175 exit(0); 176 } 177 178 /* otherwise we go back to regular parsing */ 179 } 180 181 while ((ch = getopt(argc, argv, 182 "a:A:Bc:C:f:F:g:GiI:l:LmM:r:R:sSpPt:uU:v")) != -1) 183 switch (ch) { 184 case 'a': 185 action = RAIDFRAME_ADD_HOT_SPARE; 186 get_comp(component, optarg, sizeof(component)); 187 num_options++; 188 break; 189 case 'A': 190 action = RAIDFRAME_SET_AUTOCONFIG; 191 strlcpy(autoconf, optarg, sizeof(autoconf)); 192 num_options++; 193 break; 194 case 'c': 195 action = RAIDFRAME_CONFIGURE; 196 strlcpy(config_filename, optarg, 197 sizeof(config_filename)); 198 force = 0; 199 num_options++; 200 break; 201 case 'C': 202 strlcpy(config_filename, optarg, 203 sizeof(config_filename)); 204 action = RAIDFRAME_CONFIGURE; 205 force = 1; 206 num_options++; 207 break; 208 case 'f': 209 action = RAIDFRAME_FAIL_DISK; 210 get_comp(component, optarg, sizeof(component)); 211 do_recon = 0; 212 num_options++; 213 break; 214 case 'F': 215 action = RAIDFRAME_FAIL_DISK; 216 get_comp(component, optarg, sizeof(component)); 217 do_recon = 1; 218 num_options++; 219 break; 220 case 'g': 221 action = RAIDFRAME_GET_COMPONENT_LABEL; 222 get_comp(component, optarg, sizeof(component)); 223 openmode = O_RDONLY; 224 num_options++; 225 break; 226 case 'G': 227 action = RAIDFRAME_GET_INFO; 228 openmode = O_RDONLY; 229 do_output = 1; 230 num_options++; 231 break; 232 case 'i': 233 action = RAIDFRAME_REWRITEPARITY; 234 num_options++; 235 break; 236 case 'I': 237 action = RAIDFRAME_INIT_LABELS; 238 serial_number = xstrtouint(optarg); 239 num_options++; 240 break; 241 case 'l': 242 action = RAIDFRAME_SET_COMPONENT_LABEL; 243 get_comp(component, optarg, sizeof(component)); 244 num_options++; 245 break; 246 case 'L': 247 action = RAIDFRAME_RESCAN; 248 num_options++; 249 break; 250 case 'm': 251 action = RAIDFRAME_PARITYMAP_STATUS; 252 openmode = O_RDONLY; 253 num_options++; 254 break; 255 case 'M': 256 action = RAIDFRAME_PARITYMAP_SET_DISABLE; 257 parityconf = strdup(optarg); 258 num_options++; 259 /* XXXjld: should rf_pm_configure do the strtol()s? */ 260 i = 0; 261 while (i < 3 && optind < argc && 262 isdigit((int)argv[optind][0])) 263 parityparams[i++] = xstrtouint(argv[optind++]); 264 while (i < 3) 265 parityparams[i++] = 0; 266 break; 267 case 'p': 268 action = RAIDFRAME_CHECK_PARITY; 269 openmode = O_RDONLY; 270 num_options++; 271 break; 272 case 'P': 273 action = RAIDFRAME_CHECK_PARITY; 274 do_rewrite = 1; 275 num_options++; 276 break; 277 case 'r': 278 action = RAIDFRAME_REMOVE_COMPONENT; 279 get_comp(component, optarg, sizeof(component)); 280 num_options++; 281 break; 282 case 'R': 283 get_comp(component, optarg, sizeof(component)); 284 action = RAIDFRAME_REBUILD_IN_PLACE; 285 num_options++; 286 break; 287 case 's': 288 action = RAIDFRAME_GET_INFO; 289 openmode = O_RDONLY; 290 num_options++; 291 break; 292 case 'S': 293 action = RAIDFRAME_CHECK_RECON_STATUS_EXT; 294 openmode = O_RDONLY; 295 num_options++; 296 break; 297 case 't': 298 action = CONFIGURE_TEST; 299 strlcpy(config_filename, optarg, 300 sizeof(config_filename)); 301 num_options++; 302 break; 303 case 'u': 304 action = RAIDFRAME_SHUTDOWN; 305 num_options++; 306 break; 307 case 'U': 308 action = RAIDFRAME_SET_LAST_UNIT; 309 num_options++; 310 last_unit = atoi(optarg); 311 if (last_unit < 0) 312 errx(1, "Bad last unit %s", optarg); 313 break; 314 case 'v': 315 verbose = 1; 316 /* Don't bump num_options, as '-v' is not 317 an option like the others */ 318 /* num_options++; */ 319 break; 320 default: 321 usage(); 322 } 323 argc -= optind; 324 argv += optind; 325 326 if (num_options > 1) 327 usage(); 328 329 if (action == CONFIGURE_TEST) { 330 RF_Config_t cfg; 331 332 if (argc != 0) 333 usage(); 334 if (rf_MakeConfig(config_filename, &cfg) != 0) 335 exit(1); 336 exit(0);; 337 } 338 339 if (argc != 1) 340 usage(); 341 342 if (prog_init && prog_init() == -1) 343 err(1, "init failed"); 344 345 strlcpy(name, argv[0], sizeof(name)); 346 fd = opendisk1(name, openmode, dev_name, sizeof(dev_name), 0, 347 prog_open); 348 if (fd == -1) 349 err(1, "Unable to open device file: %s", name); 350 if (prog_fstat(fd, &st) == -1) 351 err(1, "stat failure on: %s", dev_name); 352 if (!S_ISBLK(st.st_mode) && !S_ISCHR(st.st_mode)) 353 err(1, "invalid device: %s", dev_name); 354 355 raidID = DISKUNIT(st.st_rdev); 356 357 switch (action) { 358 case RAIDFRAME_ADD_HOT_SPARE: 359 add_hot_spare(fd, component); 360 break; 361 case RAIDFRAME_REMOVE_COMPONENT: 362 remove_component(fd, component); 363 break; 364 case RAIDFRAME_CONFIGURE: 365 rf_configure(fd, config_filename, force); 366 break; 367 case RAIDFRAME_SET_AUTOCONFIG: 368 set_autoconfig(fd, raidID, autoconf); 369 break; 370 case RAIDFRAME_FAIL_DISK: 371 rf_fail_disk(fd, component, do_recon); 372 break; 373 case RAIDFRAME_SET_COMPONENT_LABEL: 374 set_component_label(fd, component); 375 break; 376 case RAIDFRAME_GET_COMPONENT_LABEL: 377 get_component_label(fd, component); 378 break; 379 case RAIDFRAME_INIT_LABELS: 380 init_component_labels(fd, serial_number); 381 break; 382 case RAIDFRAME_REWRITEPARITY: 383 printf("Initiating re-write of parity\n"); 384 do_ioctl(fd, RAIDFRAME_REWRITEPARITY, NULL, 385 "RAIDFRAME_REWRITEPARITY"); 386 if (verbose) { 387 sleep(3); /* XXX give it time to get started */ 388 printf("Parity Re-write status:\n"); 389 do_meter(fd, RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT); 390 } 391 break; 392 case RAIDFRAME_CHECK_RECON_STATUS_EXT: 393 check_status(fd,1); 394 break; 395 case RAIDFRAME_GET_INFO: 396 if (do_output) 397 rf_output_configuration(fd, dev_name); 398 else 399 rf_get_device_status(fd); 400 break; 401 case RAIDFRAME_PARITYMAP_STATUS: 402 rf_output_pmstat(fd, raidID); 403 break; 404 case RAIDFRAME_PARITYMAP_SET_DISABLE: 405 rf_pm_configure(fd, raidID, parityconf, parityparams); 406 break; 407 case RAIDFRAME_REBUILD_IN_PLACE: 408 rebuild_in_place(fd, component); 409 break; 410 case RAIDFRAME_CHECK_PARITY: 411 check_parity(fd, do_rewrite, dev_name); 412 break; 413 case RAIDFRAME_SHUTDOWN: 414 do_ioctl(fd, RAIDFRAME_SHUTDOWN, NULL, "RAIDFRAME_SHUTDOWN"); 415 break; 416 case RAIDFRAME_SET_LAST_UNIT: 417 do_ioctl(fd, RAIDFRAME_SET_LAST_UNIT, &last_unit, 418 "RAIDFRAME_SET_LAST_UNIT"); 419 break; 420 case RAIDFRAME_RESCAN: 421 do_ioctl(fd, RAIDFRAME_RESCAN, NULL, "RAIDFRAME_RESCAN"); 422 break; 423 default: 424 break; 425 } 426 427 prog_close(fd); 428 exit(0); 429} 430 431void 432do_ioctl(int fd, unsigned long command, void *arg, const char *ioctl_name) 433{ 434 if (prog_ioctl(fd, command, arg) == -1) 435 err(1, "ioctl (%s) failed", ioctl_name); 436} 437 438 439static void 440rf_configure(int fd, char *config_file, int force) 441{ 442 void *generic; 443 RF_Config_t cfg; 444 445 if (rf_MakeConfig( config_file, &cfg ) != 0) 446 err(1, "Unable to create RAIDframe configuration structure"); 447 448 cfg.force = force; 449 450 /* 451 * Note the extra level of redirection needed here, since 452 * what we really want to pass in is a pointer to the pointer to 453 * the configuration structure. 454 */ 455 456 generic = &cfg; 457 do_ioctl(fd, RAIDFRAME_CONFIGURE, &generic, "RAIDFRAME_CONFIGURE"); 458} 459 460static const char * 461device_status(RF_DiskStatus_t status) 462{ 463 464 switch (status) { 465 case rf_ds_optimal: 466 return ("optimal"); 467 break; 468 case rf_ds_failed: 469 return ("failed"); 470 break; 471 case rf_ds_reconstructing: 472 return ("reconstructing"); 473 break; 474 case rf_ds_dist_spared: 475 return ("dist_spared"); 476 break; 477 case rf_ds_spared: 478 return ("spared"); 479 break; 480 case rf_ds_spare: 481 return ("spare"); 482 break; 483 case rf_ds_used_spare: 484 return ("used_spare"); 485 break; 486 default: 487 return ("UNKNOWN"); 488 } 489 /* NOTREACHED */ 490} 491 492static void 493rf_get_device_status(int fd) 494{ 495 RF_DeviceConfig_t device_config; 496 void *cfg_ptr; 497 int is_clean; 498 int i, nspares; 499 500 cfg_ptr = &device_config; 501 502 do_ioctl(fd, RAIDFRAME_GET_INFO, &cfg_ptr, "RAIDFRAME_GET_INFO"); 503 504 printf("Components:\n"); 505 for(i=0; i < device_config.ndevs; i++) { 506 printf("%20s: %s\n", device_config.devs[i].devname, 507 device_status(device_config.devs[i].status)); 508 } 509 510 nspares = MIN(device_config.nspares, 511 __arraycount(device_config.spares)); 512 513 if (nspares > 0) { 514 printf("Spares:\n"); 515 for(i=0; i < nspares; i++) { 516 printf("%20s: %s\n", 517 device_config.spares[i].devname, 518 device_status(device_config.spares[i].status)); 519 } 520 } else { 521 printf("No spares.\n"); 522 } 523 for(i=0; i < device_config.ndevs; i++) { 524 if (device_config.devs[i].status == rf_ds_optimal) { 525 get_component_label(fd, device_config.devs[i].devname); 526 } else { 527 printf("%s status is: %s. Skipping label.\n", 528 device_config.devs[i].devname, 529 device_status(device_config.devs[i].status)); 530 } 531 } 532 533 if (nspares > 0) { 534 for(i=0; i < nspares; i++) { 535 if ((device_config.spares[i].status == 536 rf_ds_optimal) || 537 (device_config.spares[i].status == 538 rf_ds_used_spare)) { 539 get_component_label(fd, 540 device_config.spares[i].devname); 541 } else { 542 printf("%s status is: %s. Skipping label.\n", 543 device_config.spares[i].devname, 544 device_status( 545 device_config.spares[i].status)); 546 } 547 } 548 } 549 550 do_ioctl(fd, RAIDFRAME_CHECK_PARITY, &is_clean, 551 "RAIDFRAME_CHECK_PARITY"); 552 if (is_clean) { 553 printf("Parity status: clean\n"); 554 } else { 555 printf("Parity status: DIRTY\n"); 556 } 557 check_status(fd,0); 558} 559 560static void 561rf_output_pmstat(int fd, int raidID) 562{ 563 char srs[7]; 564 unsigned int i, j; 565 int dis, dr; 566 struct rf_pmstat st; 567 568 if (prog_ioctl(fd, RAIDFRAME_PARITYMAP_STATUS, &st) == -1) { 569 if (errno == EINVAL) { 570 printf("raid%d: has no parity; parity map disabled\n", 571 raidID); 572 return; 573 } 574 err(1, "ioctl (%s) failed", "RAIDFRAME_PARITYMAP_STATUS"); 575 } 576 577 if (st.enabled) { 578 if (0 > humanize_number(srs, 7, st.region_size * DEV_BSIZE, 579 "B", HN_AUTOSCALE, HN_NOSPACE)) 580 strlcpy(srs, "???", 7); 581 582 printf("raid%d: parity map enabled with %u regions of %s\n", 583 raidID, st.params.regions, srs); 584 printf("raid%d: regions marked clean after %d intervals of" 585 " %d.%03ds\n", raidID, st.params.cooldown, 586 st.params.tickms / 1000, st.params.tickms % 1000); 587 printf("raid%d: write/sync/clean counters " 588 "%"PRIu64"/%"PRIu64"/%"PRIu64"\n", raidID, 589 st.ctrs.nwrite, st.ctrs.ncachesync, st.ctrs.nclearing); 590 591 dr = 0; 592 for (i = 0; i < st.params.regions; i++) 593 if (isset(st.dirty, i)) 594 dr++; 595 printf("raid%d: %d dirty region%s\n", raidID, dr, 596 dr == 1 ? "" : "s"); 597 598 if (verbose > 0) { 599 for (i = 0; i < RF_PARITYMAP_NBYTE; i += 32) { 600 printf(" "); 601 for (j = i; j < RF_PARITYMAP_NBYTE 602 && j < i + 32; j++) 603 printf("%x%x", st.dirty[j] & 15, 604 (st.dirty[j] >> 4) & 15); 605 printf("\n"); 606 } 607 } 608 } else { 609 printf("raid%d: parity map disabled\n", raidID); 610 } 611 612 do_ioctl(fd, RAIDFRAME_PARITYMAP_GET_DISABLE, &dis, 613 "RAIDFRAME_PARITYMAP_GET_DISABLE"); 614 printf("raid%d: parity map will %s %sabled on next configure\n", 615 raidID, dis == st.enabled ? "be" : "remain", dis ? "dis" : "en"); 616} 617 618static void 619rf_pm_configure(int fd, int raidID, char *parityconf, int parityparams[]) 620{ 621 int dis; 622 struct rf_pmparams params; 623 624 if (strcasecmp(parityconf, "yes") == 0) 625 dis = 0; 626 else if (strcasecmp(parityconf, "no") == 0) 627 dis = 1; 628 else if (strcasecmp(parityconf, "set") == 0) { 629 params.cooldown = parityparams[0]; 630 params.tickms = parityparams[1]; 631 params.regions = parityparams[2]; 632 633 do_ioctl(fd, RAIDFRAME_PARITYMAP_SET_PARAMS, ¶ms, 634 "RAIDFRAME_PARITYMAP_SET_PARAMS"); 635 636 if (params.cooldown != 0 || params.tickms != 0) { 637 printf("raid%d: parity cleaned after", raidID); 638 if (params.cooldown != 0) 639 printf(" %d", params.cooldown); 640 printf(" intervals"); 641 if (params.tickms != 0) { 642 printf(" of %d.%03ds", params.tickms / 1000, 643 params.tickms % 1000); 644 } 645 printf("\n"); 646 } 647 if (params.regions != 0) 648 printf("raid%d: will use %d regions on next" 649 " configuration\n", raidID, params.regions); 650 651 return; 652 /* XXX the control flow here could be prettier. */ 653 } else 654 err(1, "`%s' is not a valid parity map command", parityconf); 655 656 do_ioctl(fd, RAIDFRAME_PARITYMAP_SET_DISABLE, &dis, 657 "RAIDFRAME_PARITYMAP_SET_DISABLE"); 658 printf("raid%d: parity map will be %sabled on next configure\n", 659 raidID, dis ? "dis" : "en"); 660} 661 662/* convert "component0" into "absent" */ 663static const char *rf_output_devname(const char *name) 664{ 665 666 if (strncmp(name, "component", 9) == 0) 667 return "absent"; 668 return name; 669} 670 671static void 672rf_output_configuration(int fd, const char *name) 673{ 674 RF_DeviceConfig_t device_config; 675 void *cfg_ptr; 676 int i, nspares; 677 RF_ComponentLabel_t component_label; 678 void *label_ptr; 679 int component_num; 680 int num_cols; 681 682 cfg_ptr = &device_config; 683 684 printf("# raidctl config file for %s\n", name); 685 printf("\n"); 686 do_ioctl(fd, RAIDFRAME_GET_INFO, &cfg_ptr, "RAIDFRAME_GET_INFO"); 687 688 nspares = MIN(device_config.nspares, 689 __arraycount(device_config.spares)); 690 691 printf("START array\n"); 692 printf("# numCol numSpare\n"); 693 printf("%d %d\n", device_config.cols, device_config.nspares); 694 printf("\n"); 695 696 printf("START disks\n"); 697 for(i=0; i < device_config.ndevs; i++) 698 printf("%s\n", 699 rf_output_devname(device_config.devs[i].devname)); 700 printf("\n"); 701 702 if (nspares > 0) { 703 printf("START spare\n"); 704 for(i=0; i < nspares; i++) 705 printf("%s\n", device_config.spares[i].devname); 706 printf("\n"); 707 } 708 709 for(i=0; i < device_config.ndevs; i++) { 710 if (device_config.devs[i].status == rf_ds_optimal) 711 break; 712 } 713 if (i == device_config.ndevs) { 714 printf("# WARNING: no optimal components; using %s\n", 715 device_config.devs[0].devname); 716 i = 0; 717 } 718 get_component_number(fd, device_config.devs[i].devname, 719 &component_num, &num_cols); 720 memset(&component_label, 0, sizeof(RF_ComponentLabel_t)); 721 component_label.row = component_num / num_cols; 722 component_label.column = component_num % num_cols; 723 label_ptr = &component_label; 724 do_ioctl(fd, RAIDFRAME_GET_COMPONENT_LABEL, label_ptr, 725 "RAIDFRAME_GET_COMPONENT_LABEL"); 726 727 printf("START layout\n"); 728 printf( 729 "# sectPerSU SUsPerParityUnit SUsPerReconUnit RAID_level_%c\n", 730 (char) component_label.parityConfig); 731 printf("%d %d %d %c\n", 732 component_label.sectPerSU, component_label.SUsPerPU, 733 component_label.SUsPerRU, (char) component_label.parityConfig); 734 printf("\n"); 735 736 printf("START queue\n"); 737 printf("fifo %d\n", device_config.maxqdepth); 738} 739 740static void 741get_component_number(int fd, char *component_name, int *component_number, 742 int *num_columns) 743{ 744 RF_DeviceConfig_t device_config; 745 void *cfg_ptr; 746 int i, nspares; 747 int found; 748 749 *component_number = -1; 750 751 /* Assuming a full path spec... */ 752 cfg_ptr = &device_config; 753 do_ioctl(fd, RAIDFRAME_GET_INFO, &cfg_ptr, 754 "RAIDFRAME_GET_INFO"); 755 756 *num_columns = device_config.cols; 757 758 nspares = MIN(device_config.nspares, 759 __arraycount(device_config.spares)); 760 761 found = 0; 762 for(i=0; i < device_config.ndevs; i++) { 763 if (strncmp(component_name, device_config.devs[i].devname, 764 PATH_MAX)==0) { 765 found = 1; 766 *component_number = i; 767 } 768 } 769 if (!found) { /* maybe it's a spare? */ 770 for(i=0; i < nspares; i++) { 771 if (strncmp(component_name, 772 device_config.spares[i].devname, 773 PATH_MAX)==0) { 774 found = 1; 775 *component_number = i + device_config.ndevs; 776 /* the way spares are done should 777 really change... */ 778 *num_columns = device_config.cols + 779 device_config.nspares; 780 } 781 } 782 } 783 784 if (!found) 785 err(1,"%s is not a component of this device", component_name); 786} 787 788static void 789rf_fail_disk(int fd, char *component_to_fail, int do_recon) 790{ 791 struct rf_recon_req recon_request; 792 int component_num; 793 int num_cols; 794 795 get_component_number(fd, component_to_fail, &component_num, &num_cols); 796 797 recon_request.col = component_num % num_cols; 798 if (do_recon) { 799 recon_request.flags = RF_FDFLAGS_RECON; 800 } else { 801 recon_request.flags = RF_FDFLAGS_NONE; 802 } 803 do_ioctl(fd, RAIDFRAME_FAIL_DISK, &recon_request, 804 "RAIDFRAME_FAIL_DISK"); 805 if (do_recon && verbose) { 806 printf("Reconstruction status:\n"); 807 sleep(3); /* XXX give reconstruction a chance to start */ 808 do_meter(fd,RAIDFRAME_CHECK_RECON_STATUS_EXT); 809 } 810} 811 812static void 813get_component_label(int fd, char *component) 814{ 815 RF_ComponentLabel_t component_label; 816 void *label_ptr; 817 int component_num; 818 int num_cols; 819 820 get_component_number(fd, component, &component_num, &num_cols); 821 822 memset( &component_label, 0, sizeof(RF_ComponentLabel_t)); 823 component_label.row = component_num / num_cols; 824 component_label.column = component_num % num_cols; 825 826 label_ptr = &component_label; 827 do_ioctl( fd, RAIDFRAME_GET_COMPONENT_LABEL, label_ptr, 828 "RAIDFRAME_GET_COMPONENT_LABEL"); 829 830 printf("Component label for %s:\n",component); 831 832 printf(" Row: %d, Column: %d, Num Rows: %d, Num Columns: %d\n", 833 component_label.row, component_label.column, 834 component_label.num_rows, component_label.num_columns); 835 printf(" Version: %d, Serial Number: %u, Mod Counter: %d\n", 836 component_label.version, component_label.serial_number, 837 component_label.mod_counter); 838 printf(" Clean: %s, Status: %d\n", 839 component_label.clean ? "Yes" : "No", 840 component_label.status ); 841 printf(" sectPerSU: %d, SUsPerPU: %d, SUsPerRU: %d\n", 842 component_label.sectPerSU, component_label.SUsPerPU, 843 component_label.SUsPerRU); 844 printf(" Queue size: %d, blocksize: %d, numBlocks: %"PRIu64"\n", 845 component_label.maxOutstanding, component_label.blockSize, 846 rf_component_label_numblocks(&component_label)); 847 printf(" RAID Level: %c\n", (char) component_label.parityConfig); 848 printf(" Autoconfig: %s\n", 849 component_label.autoconfigure ? "Yes" : "No" ); 850 printf(" Root partition: %s\n", 851 rootpart[component_label.root_partition & 3]); 852 printf(" Last configured as: raid%d\n", component_label.last_unit ); 853} 854 855static void 856set_component_label(int fd, char *component) 857{ 858 RF_ComponentLabel_t component_label; 859 int component_num; 860 int num_cols; 861 862 get_component_number(fd, component, &component_num, &num_cols); 863 864 /* XXX This is currently here for testing, and future expandability */ 865 866 component_label.version = 1; 867 component_label.serial_number = 123456; 868 component_label.mod_counter = 0; 869 component_label.row = component_num / num_cols; 870 component_label.column = component_num % num_cols; 871 component_label.num_rows = 0; 872 component_label.num_columns = 5; 873 component_label.clean = 0; 874 component_label.status = 1; 875 876 do_ioctl( fd, RAIDFRAME_SET_COMPONENT_LABEL, &component_label, 877 "RAIDFRAME_SET_COMPONENT_LABEL"); 878} 879 880 881static void 882init_component_labels(int fd, int serial_number) 883{ 884 RF_ComponentLabel_t component_label; 885 886 component_label.version = 0; 887 component_label.serial_number = serial_number; 888 component_label.mod_counter = 0; 889 component_label.row = 0; 890 component_label.column = 0; 891 component_label.num_rows = 0; 892 component_label.num_columns = 0; 893 component_label.clean = 0; 894 component_label.status = 0; 895 896 do_ioctl( fd, RAIDFRAME_INIT_LABELS, &component_label, 897 "RAIDFRAME_INIT_LABELS"); 898} 899 900static void 901set_autoconfig(int fd, int raidID, char *autoconf) 902{ 903 int auto_config; 904 int root_config; 905 906 auto_config = 0; 907 root_config = 0; 908 909 if (strncasecmp(autoconf, "root", 4) == 0 || 910 strncasecmp(autoconf, "hard", 4) == 0 || 911 strncasecmp(autoconf, "force", 5) == 0) { 912 root_config = 1; 913 } else if (strncasecmp(autoconf, "soft", 4) == 0) { 914 root_config = 2; 915 } 916 917 if ((strncasecmp(autoconf,"yes", 3) == 0) || 918 root_config > 0) { 919 auto_config = 1; 920 } 921 922 do_ioctl(fd, RAIDFRAME_SET_AUTOCONFIG, &auto_config, 923 "RAIDFRAME_SET_AUTOCONFIG"); 924 925 do_ioctl(fd, RAIDFRAME_SET_ROOT, &root_config, 926 "RAIDFRAME_SET_ROOT"); 927 928 if (verbose) { 929 printf("raid%d: Autoconfigure: %s\n", raidID, 930 auto_config ? "Yes" : "No"); 931 if (auto_config == 1) { 932 printf("raid%d: Root: %s\n", raidID, rootpart[root_config]); 933 } 934 } 935} 936 937static void 938add_hot_spare(int fd, char *component) 939{ 940 RF_SingleComponent_t hot_spare; 941 942 hot_spare.row = 0; 943 hot_spare.column = 0; 944 strncpy(hot_spare.component_name, component, 945 sizeof(hot_spare.component_name)); 946 947 do_ioctl( fd, RAIDFRAME_ADD_HOT_SPARE, &hot_spare, 948 "RAIDFRAME_ADD_HOT_SPARE"); 949} 950 951static void 952remove_component(int fd, char *component) 953{ 954 RF_SingleComponent_t comp; 955 int component_num; 956 int num_cols; 957 958 get_component_number(fd, component, &component_num, &num_cols); 959 960 comp.row = component_num / num_cols; 961 comp.column = component_num % num_cols; 962 963 strncpy(comp.component_name, component, 964 sizeof(comp.component_name)); 965 966 do_ioctl( fd, RAIDFRAME_REMOVE_COMPONENT, &comp, 967 "RAIDFRAME_REMOVE_COMPONENT"); 968} 969 970static void 971rebuild_in_place(int fd, char *component) 972{ 973 RF_SingleComponent_t comp; 974 int component_num; 975 int num_cols; 976 977 get_component_number(fd, component, &component_num, &num_cols); 978 979 comp.row = 0; 980 comp.column = component_num; 981 strncpy(comp.component_name, component, sizeof(comp.component_name)); 982 983 do_ioctl( fd, RAIDFRAME_REBUILD_IN_PLACE, &comp, 984 "RAIDFRAME_REBUILD_IN_PLACE"); 985 986 if (verbose) { 987 printf("Reconstruction status:\n"); 988 sleep(3); /* XXX give reconstruction a chance to start */ 989 do_meter(fd,RAIDFRAME_CHECK_RECON_STATUS_EXT); 990 } 991 992} 993 994static void 995check_parity(int fd, int do_rewrite, char *dev_name) 996{ 997 int is_clean; 998 int percent_done; 999 1000 is_clean = 0; 1001 percent_done = 0; 1002 do_ioctl(fd, RAIDFRAME_CHECK_PARITY, &is_clean, 1003 "RAIDFRAME_CHECK_PARITY"); 1004 if (is_clean) { 1005 printf("%s: Parity status: clean\n",dev_name); 1006 } else { 1007 printf("%s: Parity status: DIRTY\n",dev_name); 1008 if (do_rewrite) { 1009 printf("%s: Initiating re-write of parity\n", 1010 dev_name); 1011 do_ioctl(fd, RAIDFRAME_REWRITEPARITY, NULL, 1012 "RAIDFRAME_REWRITEPARITY"); 1013 sleep(3); /* XXX give it time to 1014 get started. */ 1015 if (verbose) { 1016 printf("Parity Re-write status:\n"); 1017 do_meter(fd, 1018 RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT); 1019 } else { 1020 do_ioctl(fd, 1021 RAIDFRAME_CHECK_PARITYREWRITE_STATUS, 1022 &percent_done, 1023 "RAIDFRAME_CHECK_PARITYREWRITE_STATUS" 1024 ); 1025 while( percent_done < 100 ) { 1026 sleep(3); /* wait a bit... */ 1027 do_ioctl(fd, 1028 RAIDFRAME_CHECK_PARITYREWRITE_STATUS, 1029 &percent_done, 1030 "RAIDFRAME_CHECK_PARITYREWRITE_STATUS"); 1031 } 1032 1033 } 1034 printf("%s: Parity Re-write complete\n", dev_name); 1035 } else { 1036 /* parity is wrong, and is not being fixed. 1037 Exit w/ an error. */ 1038 exit(1); 1039 } 1040 } 1041} 1042 1043 1044static void 1045check_status(int fd, int meter) 1046{ 1047 int recon_percent_done = 0; 1048 int parity_percent_done = 0; 1049 1050 do_ioctl(fd, RAIDFRAME_CHECK_RECON_STATUS, &recon_percent_done, 1051 "RAIDFRAME_CHECK_RECON_STATUS"); 1052 printf("Reconstruction is %d%% complete.\n", recon_percent_done); 1053 do_ioctl(fd, RAIDFRAME_CHECK_PARITYREWRITE_STATUS, 1054 &parity_percent_done, 1055 "RAIDFRAME_CHECK_PARITYREWRITE_STATUS"); 1056 printf("Parity Re-write is %d%% complete.\n", parity_percent_done); 1057 1058 if (meter) { 1059 /* These 3 should be mutually exclusive at this point */ 1060 if (recon_percent_done < 100) { 1061 printf("Reconstruction status:\n"); 1062 do_meter(fd,RAIDFRAME_CHECK_RECON_STATUS_EXT); 1063 } else if (parity_percent_done < 100) { 1064 printf("Parity Re-write status:\n"); 1065 do_meter(fd,RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT); 1066 } 1067 } 1068} 1069 1070const char *tbits = "|/-\\"; 1071 1072static void 1073do_meter(int fd, u_long option) 1074{ 1075 int percent_done; 1076 RF_uint64 start_value; 1077 RF_ProgressInfo_t progressInfo; 1078 void *pInfoPtr; 1079 struct timeval start_time; 1080 struct timeval current_time; 1081 double elapsed; 1082 int elapsed_sec; 1083 int elapsed_usec; 1084 int simple_eta,last_eta; 1085 double rate; 1086 RF_uint64 amount; 1087 int tbit_value; 1088 char bar_buffer[1024]; 1089 char eta_buffer[1024]; 1090 1091 if (gettimeofday(&start_time,NULL) == -1) 1092 err(1, "gettimeofday failed!?!?"); 1093 memset(&progressInfo, 0, sizeof(RF_ProgressInfo_t)); 1094 pInfoPtr=&progressInfo; 1095 1096 percent_done = 0; 1097 do_ioctl(fd, option, pInfoPtr, ""); 1098 start_value = progressInfo.completed; 1099 current_time = start_time; 1100 simple_eta = 0; 1101 last_eta = 0; 1102 1103 tbit_value = 0; 1104 while(progressInfo.completed < progressInfo.total) { 1105 1106 percent_done = (progressInfo.completed * 100) / 1107 progressInfo.total; 1108 1109 get_bar(bar_buffer, percent_done, 40); 1110 1111 elapsed_sec = current_time.tv_sec - start_time.tv_sec; 1112 elapsed_usec = current_time.tv_usec - start_time.tv_usec; 1113 if (elapsed_usec < 0) { 1114 elapsed_usec-=1000000; 1115 elapsed_sec++; 1116 } 1117 1118 elapsed = (double) elapsed_sec + 1119 (double) elapsed_usec / 1000000.0; 1120 1121 amount = progressInfo.completed - start_value; 1122 1123 if (amount <= 0) { /* we don't do negatives (yet?) */ 1124 amount = 0; 1125 } 1126 1127 if (elapsed == 0) 1128 rate = 0.0; 1129 else 1130 rate = amount / elapsed; 1131 1132 if (rate > 0.0) { 1133 simple_eta = (int) (((double)progressInfo.total - 1134 (double) progressInfo.completed) 1135 / rate); 1136 } else { 1137 simple_eta = -1; 1138 } 1139 1140 if (simple_eta <=0) { 1141 simple_eta = last_eta; 1142 } else { 1143 last_eta = simple_eta; 1144 } 1145 1146 get_time_string(eta_buffer, sizeof eta_buffer, simple_eta); 1147 1148 fprintf(stdout,"\r%3d%% |%s| ETA: %s %c", 1149 percent_done,bar_buffer,eta_buffer,tbits[tbit_value]); 1150 fflush(stdout); 1151 1152 if (++tbit_value>3) 1153 tbit_value = 0; 1154 1155 sleep(2); 1156 1157 if (gettimeofday(¤t_time,NULL) == -1) 1158 err(1, "gettimeofday failed!?!?"); 1159 1160 do_ioctl( fd, option, pInfoPtr, ""); 1161 1162 1163 } 1164 printf("\n"); 1165} 1166/* 40 '*''s per line, then 40 ' ''s line. */ 1167/* If you've got a screen wider than 160 characters, "tough" */ 1168 1169#define STAR_MIDPOINT 4*40 1170const char stars[] = "****************************************" 1171 "****************************************" 1172 "****************************************" 1173 "****************************************" 1174 " " 1175 " " 1176 " " 1177 " " 1178 " "; 1179 1180static void 1181get_bar(char *string, double percent, int max_strlen) 1182{ 1183 int offset; 1184 1185 if (max_strlen > STAR_MIDPOINT) { 1186 max_strlen = STAR_MIDPOINT; 1187 } 1188 offset = STAR_MIDPOINT - 1189 (int)((percent * max_strlen)/ 100); 1190 if (offset < 0) 1191 offset = 0; 1192 snprintf(string,max_strlen,"%s",stars+offset); 1193} 1194 1195static void 1196get_time_string(char *string, size_t len, int simple_time) 1197{ 1198 int minutes, seconds, hours; 1199 char hours_buffer[8]; 1200 char minutes_buffer[5]; 1201 char seconds_buffer[5]; 1202 1203 if (simple_time >= 0) { 1204 1205 minutes = simple_time / 60; 1206 seconds = simple_time - 60*minutes; 1207 hours = minutes / 60; 1208 minutes = minutes - 60*hours; 1209#if defined(__GNUC__) 1210 /* 1211 * snprintf() truncation checker fails to detect that seconds 1212 * and minutes will be 0-59 range. 1213 */ 1214 if (minutes < 0 || minutes > 60) 1215 minutes = 60; 1216 if (seconds < 0 || seconds > 60) 1217 seconds = 60; 1218#endif 1219 1220 if (hours > 0) { 1221 snprintf(hours_buffer,sizeof hours_buffer, 1222 "%02d:",hours); 1223 } else { 1224 snprintf(hours_buffer,sizeof hours_buffer," "); 1225 } 1226 1227 snprintf(minutes_buffer,sizeof minutes_buffer,"%02d:",minutes); 1228 snprintf(seconds_buffer,sizeof seconds_buffer,"%02d",seconds); 1229 snprintf(string,len,"%s%s%s", 1230 hours_buffer, minutes_buffer, seconds_buffer); 1231 } else { 1232 snprintf(string,len," --:--"); 1233 } 1234 1235} 1236 1237/* Simplified RAID creation with a single command line... */ 1238static void 1239rf_simple_create(int fd, int argc, char *argv[]) 1240{ 1241 int i; 1242 int level; 1243 int num_components; 1244 char *components[RF_MAXCOL]; 1245 void *generic; 1246 RF_Config_t cfg; 1247 1248 /* 1249 * Note the extra level of redirection needed here, since 1250 * what we really want to pass in is a pointer to the pointer to 1251 * the configuration structure. 1252 */ 1253 1254 1255 if (strcmp(argv[0],"mirror")==0) { 1256 level = 1; 1257 } else 1258 level = atoi(argv[0]); 1259 1260 if (level != 0 && level != 1 && level !=5) 1261 usage(); 1262 1263 /* remaining args must be components */ 1264 num_components = 0; 1265 for (i=1 ; i<argc ; i++) { 1266 components[i-1] = argv[i]; 1267 num_components++; 1268 } 1269 1270 /* Level 0 must have at least two components. 1271 Level 1 must have exactly two components. 1272 Level 5 must have at least three components. */ 1273 if ((level == 0 && num_components < 2) || 1274 (level == 1 && num_components != 2) || 1275 (level == 5 && num_components < 3)) 1276 usage(); 1277 1278 /* build a config... */ 1279 1280 memset(&cfg, 0, sizeof(cfg)); 1281 1282 cfg.numCol = num_components; 1283 cfg.numSpare = 0; 1284 1285 for (i=0 ; i<num_components; i++) { 1286 strlcpy(cfg.devnames[0][i], components[i], 1287 sizeof(cfg.devnames[0][i])); 1288 } 1289 1290 /* pick some reasonable values for sectPerSU, etc. */ 1291 if (level == 0) { 1292 if (num_components == 2) { 1293 /* 64 blocks (32K) per component - 64K data per stripe */ 1294 cfg.sectPerSU = 64; 1295 } else if (num_components == 3 || num_components == 4) { 1296 /* 32 blocks (16K) per component - 64K data per strip for 1297 the 4-component case. */ 1298 cfg.sectPerSU = 32; 1299 } else { 1300 /* 16 blocks (8K) per component */ 1301 cfg.sectPerSU = 16; 1302 } 1303 } else if (level == 1) { 1304 /* 128 blocks (64K per component) - 64K per stripe */ 1305 cfg.sectPerSU = 128; 1306 } else if (level == 5) { 1307 if (num_components == 3) { 1308 /* 64 blocks (32K) per disk - 64K data per stripe */ 1309 cfg.sectPerSU = 64; 1310 } else if (num_components >= 4 && num_components < 9) { 1311 /* 4 components makes 3 data components. No power of 2 is 1312 evenly divisible by 3 so performance will be lousy 1313 regardless of what number we choose here. 5 components is 1314 what we are really hoping for here, as 5 components with 4 1315 data components on RAID 5 means 32 blocks (16K) per data 1316 component, or 64K per stripe */ 1317 cfg.sectPerSU = 32; 1318 } else { 1319 /* 9 components here is optimal for 16 blocks (8K) per data 1320 component */ 1321 cfg.sectPerSU = 16; 1322 } 1323 } else 1324 usage(); 1325 1326 cfg.SUsPerPU = 1; 1327 cfg.SUsPerRU = 1; 1328 cfg.parityConfig = '0' + level; 1329 strlcpy(cfg.diskQueueType, "fifo", sizeof(cfg.diskQueueType)); 1330 cfg.maxOutstandingDiskReqs = 1; 1331 cfg.force = 1; 1332 1333 /* configure... */ 1334 1335 generic = &cfg; 1336 do_ioctl(fd, RAIDFRAME_CONFIGURE, &generic, "RAIDFRAME_CONFIGURE"); 1337 1338 if (level == 1 || level == 5) 1339 do_ioctl(fd, RAIDFRAME_REWRITEPARITY, NULL, 1340 "RAIDFRAME_REWRITEPARITY"); 1341} 1342 1343 1344static void 1345usage(void) 1346{ 1347 const char *progname = getprogname(); 1348 1349 fprintf(stderr, 1350 "usage: %s dev create [0 | 1 | mirror | 5] component component ...\n", 1351 progname); 1352 fprintf(stderr, " %s [-v] -A [yes | no | softroot | hardroot] dev\n", 1353 progname); 1354 fprintf(stderr, " %s [-v] -a component dev\n", progname); 1355 fprintf(stderr, " %s [-v] -B dev\n", progname); 1356 fprintf(stderr, " %s [-v] -C config_file dev\n", progname); 1357 fprintf(stderr, " %s [-v] -c config_file dev\n", progname); 1358 fprintf(stderr, " %s [-v] -F component dev\n", progname); 1359 fprintf(stderr, " %s [-v] -f component dev\n", progname); 1360 fprintf(stderr, " %s [-v] -G dev\n", progname); 1361 fprintf(stderr, " %s [-v] -g component dev\n", progname); 1362 fprintf(stderr, " %s [-v] -I serial_number dev\n", progname); 1363 fprintf(stderr, " %s [-v] -i dev\n", progname); 1364 fprintf(stderr, " %s [-v] -M [yes | no | set params] dev\n", 1365 progname); 1366 fprintf(stderr, " %s [-v] -m dev\n", progname); 1367 fprintf(stderr, " %s [-v] -P dev\n", progname); 1368 fprintf(stderr, " %s [-v] -p dev\n", progname); 1369 fprintf(stderr, " %s [-v] -R component dev\n", progname); 1370 fprintf(stderr, " %s [-v] -r component dev\n", progname); 1371 fprintf(stderr, " %s [-v] -S dev\n", progname); 1372 fprintf(stderr, " %s [-v] -s dev\n", progname); 1373 fprintf(stderr, " %s [-v] -t config_file\n", progname); 1374 fprintf(stderr, " %s [-v] -U unit dev\n", progname); 1375 fprintf(stderr, " %s [-v] -u dev\n", progname); 1376 exit(1); 1377 /* NOTREACHED */ 1378} 1379 1380static unsigned int 1381xstrtouint(const char *str) 1382{ 1383 int e; 1384 unsigned int num = (unsigned int)strtou(str, NULL, 10, 0, INT_MAX, &e); 1385 if (e) 1386 errc(EXIT_FAILURE, e, "Bad number `%s'", str); 1387 return num; 1388} 1389