1# Makefile.in generated by automake 1.16.5 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2021 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Hey Emacs, this is -*- makefile-automake -*- file! 18# vim: filetype=automake 19 20VPATH = @srcdir@ 21am__is_gnu_make = { \ 22 if test -z '$(MAKELEVEL)'; then \ 23 false; \ 24 elif test -n '$(MAKE_HOST)'; then \ 25 true; \ 26 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 27 true; \ 28 else \ 29 false; \ 30 fi; \ 31} 32am__make_running_with_option = \ 33 case $${target_option-} in \ 34 ?) ;; \ 35 *) echo "am__make_running_with_option: internal error: invalid" \ 36 "target option '$${target_option-}' specified" >&2; \ 37 exit 1;; \ 38 esac; \ 39 has_opt=no; \ 40 sane_makeflags=$$MAKEFLAGS; \ 41 if $(am__is_gnu_make); then \ 42 sane_makeflags=$$MFLAGS; \ 43 else \ 44 case $$MAKEFLAGS in \ 45 *\\[\ \ ]*) \ 46 bs=\\; \ 47 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 48 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 49 esac; \ 50 fi; \ 51 skip_next=no; \ 52 strip_trailopt () \ 53 { \ 54 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 55 }; \ 56 for flg in $$sane_makeflags; do \ 57 test $$skip_next = yes && { skip_next=no; continue; }; \ 58 case $$flg in \ 59 *=*|--*) continue;; \ 60 -*I) strip_trailopt 'I'; skip_next=yes;; \ 61 -*I?*) strip_trailopt 'I';; \ 62 -*O) strip_trailopt 'O'; skip_next=yes;; \ 63 -*O?*) strip_trailopt 'O';; \ 64 -*l) strip_trailopt 'l'; skip_next=yes;; \ 65 -*l?*) strip_trailopt 'l';; \ 66 -[dEDm]) skip_next=yes;; \ 67 -[JT]) skip_next=yes;; \ 68 esac; \ 69 case $$flg in \ 70 *$$target_option*) has_opt=yes; break;; \ 71 esac; \ 72 done; \ 73 test $$has_opt = yes 74am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 75am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 76pkgdatadir = $(datadir)/@PACKAGE@ 77pkgincludedir = $(includedir)/@PACKAGE@ 78pkglibdir = $(libdir)/@PACKAGE@ 79pkglibexecdir = $(libexecdir)/@PACKAGE@ 80am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 81install_sh_DATA = $(install_sh) -c -m 644 82install_sh_PROGRAM = $(install_sh) -c 83install_sh_SCRIPT = $(install_sh) -c 84INSTALL_HEADER = $(INSTALL_DATA) 85transform = $(program_transform_name) 86NORMAL_INSTALL = : 87PRE_INSTALL = : 88POST_INSTALL = : 89NORMAL_UNINSTALL = : 90PRE_UNINSTALL = : 91POST_UNINSTALL = : 92build_triplet = @build@ 93host_triplet = @host@ 94target_triplet = @target@ 95@HOST_MACOS_TRUE@am__append_1 = \ 96@HOST_MACOS_TRUE@ -Wl,-flat_namespace 97 98@HAVE_CMOCKA_TRUE@am__append_2 = tests 99subdir = . 100ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 101am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_compile_flag.m4 \ 102 $(top_srcdir)/m4/ax_check_link_flag.m4 \ 103 $(top_srcdir)/m4/ax_check_openssl.m4 \ 104 $(top_srcdir)/m4/ax_gcc_func_attribute.m4 \ 105 $(top_srcdir)/m4/ax_jemalloc.m4 \ 106 $(top_srcdir)/m4/ax_lib_lmdb.m4 \ 107 $(top_srcdir)/m4/ax_posix_shell.m4 \ 108 $(top_srcdir)/m4/ax_prog_cc_for_build.m4 \ 109 $(top_srcdir)/m4/ax_pthread.m4 \ 110 $(top_srcdir)/m4/ax_restore_flags.m4 \ 111 $(top_srcdir)/m4/ax_save_flags.m4 $(top_srcdir)/m4/ax_tls.m4 \ 112 $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ 113 $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ 114 $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac 115am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 116 $(ACLOCAL_M4) 117DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 118 $(am__configure_deps) $(dist_sysconf_DATA) $(am__DIST_COMMON) 119am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 120 configure.lineno config.status.lineno 121mkinstalldirs = $(install_sh) -d 122CONFIG_HEADER = config.h 123CONFIG_CLEAN_FILES = doc/doxygen/doxygen-input-filter \ 124 util/check-make-install 125CONFIG_CLEAN_VPATH_FILES = 126AM_V_P = $(am__v_P_@AM_V@) 127am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 128am__v_P_0 = false 129am__v_P_1 = : 130AM_V_GEN = $(am__v_GEN_@AM_V@) 131am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 132am__v_GEN_0 = @echo " GEN " $@; 133am__v_GEN_1 = 134AM_V_at = $(am__v_at_@AM_V@) 135am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 136am__v_at_0 = @ 137am__v_at_1 = 138SOURCES = 139DIST_SOURCES = 140RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 141 ctags-recursive dvi-recursive html-recursive info-recursive \ 142 install-data-recursive install-dvi-recursive \ 143 install-exec-recursive install-html-recursive \ 144 install-info-recursive install-pdf-recursive \ 145 install-ps-recursive install-recursive installcheck-recursive \ 146 installdirs-recursive pdf-recursive ps-recursive \ 147 tags-recursive uninstall-recursive 148am__can_run_installinfo = \ 149 case $$AM_UPDATE_INFO_DIR in \ 150 n|no|NO) false;; \ 151 *) (install-info --version) >/dev/null 2>&1;; \ 152 esac 153am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 154am__vpath_adj = case $$p in \ 155 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 156 *) f=$$p;; \ 157 esac; 158am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 159am__install_max = 40 160am__nobase_strip_setup = \ 161 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 162am__nobase_strip = \ 163 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 164am__nobase_list = $(am__nobase_strip_setup); \ 165 for p in $$list; do echo "$$p $$p"; done | \ 166 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 167 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 168 if (++n[$$2] == $(am__install_max)) \ 169 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 170 END { for (dir in files) print dir, files[dir] }' 171am__base_list = \ 172 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 173 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 174am__uninstall_files_from_dir = { \ 175 test -z "$$files" \ 176 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 177 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 178 $(am__cd) "$$dir" && rm -f $$files; }; \ 179 } 180am__installdirs = "$(DESTDIR)$(sysconfdir)" 181DATA = $(dist_sysconf_DATA) 182RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 183 distclean-recursive maintainer-clean-recursive 184am__recursive_targets = \ 185 $(RECURSIVE_TARGETS) \ 186 $(RECURSIVE_CLEAN_TARGETS) \ 187 $(am__extra_recursive_targets) 188AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 189 cscope distdir distdir-am dist dist-all distcheck 190am__extra_recursive_targets = test-recursive unit-recursive \ 191 doc-recursive 192am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \ 193 config.h.in 194# Read a list of newline-separated strings from the standard input, 195# and print each of them once, without duplicates. Input order is 196# *not* preserved. 197am__uniquify_input = $(AWK) '\ 198 BEGIN { nonempty = 0; } \ 199 { items[$$0] = 1; nonempty = 1; } \ 200 END { if (nonempty) { for (i in items) print i; }; } \ 201' 202# Make sure the list of sources is unique. This is necessary because, 203# e.g., the same source file might be shared among _SOURCES variables 204# for different programs/libraries. 205am__define_uniq_tagged_files = \ 206 list='$(am__tagged_files)'; \ 207 unique=`for i in $$list; do \ 208 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 209 done | $(am__uniquify_input)` 210DIST_SUBDIRS = . lib doc bin fuzz tests 211am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ 212 $(top_srcdir)/Makefile.top \ 213 $(top_srcdir)/doc/doxygen/doxygen-input-filter.in \ 214 $(top_srcdir)/util/check-make-install.in AUTHORS COPYING \ 215 ChangeLog NEWS README.md ar-lib compile config.guess \ 216 config.sub install-sh ltmain.sh missing 217DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 218distdir = $(PACKAGE)-$(VERSION) 219top_distdir = $(distdir) 220am__remove_distdir = \ 221 if test -d "$(distdir)"; then \ 222 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 223 && rm -rf "$(distdir)" \ 224 || { sleep 5 && rm -rf "$(distdir)"; }; \ 225 else :; fi 226am__post_remove_distdir = $(am__remove_distdir) 227am__relativize = \ 228 dir0=`pwd`; \ 229 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 230 sed_rest='s,^[^/]*/*,,'; \ 231 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 232 sed_butlast='s,/*[^/]*$$,,'; \ 233 while test -n "$$dir1"; do \ 234 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 235 if test "$$first" != "."; then \ 236 if test "$$first" = ".."; then \ 237 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 238 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 239 else \ 240 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 241 if test "$$first2" = "$$first"; then \ 242 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 243 else \ 244 dir2="../$$dir2"; \ 245 fi; \ 246 dir0="$$dir0"/"$$first"; \ 247 fi; \ 248 fi; \ 249 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 250 done; \ 251 reldir="$$dir2" 252GZIP_ENV = --best 253DIST_ARCHIVES = $(distdir).tar.xz 254DIST_TARGETS = dist-xz 255# Exists only to be overridden by the user if desired. 256AM_DISTCHECK_DVI_TARGET = dvi 257distuninstallcheck_listfiles = find . -type f -print 258am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 259 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 260distcleancheck_listfiles = find . -type f -print 261ACLOCAL = @ACLOCAL@ 262AMTAR = @AMTAR@ 263AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 264AR = @AR@ 265AUTOCONF = @AUTOCONF@ 266AUTOHEADER = @AUTOHEADER@ 267AUTOMAKE = @AUTOMAKE@ 268AWK = @AWK@ 269BUILD_EXEEXT = @BUILD_EXEEXT@ 270BUILD_OBJEXT = @BUILD_OBJEXT@ 271CC = @CC@ 272CCDEPMODE = @CCDEPMODE@ 273CC_FOR_BUILD = @CC_FOR_BUILD@ 274CFLAGS = @CFLAGS@ 275CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@ 276CMOCKA_CFLAGS = @CMOCKA_CFLAGS@ 277CMOCKA_LIBS = @CMOCKA_LIBS@ 278CPP = @CPP@ 279CPPFLAGS = @CPPFLAGS@ 280CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@ 281CPP_FOR_BUILD = @CPP_FOR_BUILD@ 282CSCOPE = @CSCOPE@ 283CTAGS = @CTAGS@ 284CURL = @CURL@ 285CYGPATH_W = @CYGPATH_W@ 286DEFS = @DEFS@ 287DEPDIR = @DEPDIR@ 288DEVELOPER_MODE = @DEVELOPER_MODE@ 289DLLTOOL = @DLLTOOL@ 290DNSTAP_CFLAGS = @DNSTAP_CFLAGS@ 291DNSTAP_LIBS = @DNSTAP_LIBS@ 292DOXYGEN = @DOXYGEN@ 293DSYMUTIL = @DSYMUTIL@ 294DUMPBIN = @DUMPBIN@ 295ECHO_C = @ECHO_C@ 296ECHO_N = @ECHO_N@ 297ECHO_T = @ECHO_T@ 298EGREP = @EGREP@ 299ETAGS = @ETAGS@ 300EXEEXT = @EXEEXT@ 301FGREP = @FGREP@ 302FILECMD = @FILECMD@ 303FSTRM_CAPTURE = @FSTRM_CAPTURE@ 304FUZZ_LDFLAGS = @FUZZ_LDFLAGS@ 305FUZZ_LOG_COMPILER = @FUZZ_LOG_COMPILER@ 306GREP = @GREP@ 307GSSAPI_CFLAGS = @GSSAPI_CFLAGS@ 308GSSAPI_LIBS = @GSSAPI_LIBS@ 309INSTALL = @INSTALL@ 310INSTALL_DATA = @INSTALL_DATA@ 311INSTALL_PROGRAM = @INSTALL_PROGRAM@ 312INSTALL_SCRIPT = @INSTALL_SCRIPT@ 313INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 314JEMALLOC_CFLAGS = @JEMALLOC_CFLAGS@ 315JEMALLOC_LIBS = @JEMALLOC_LIBS@ 316JSON_C_CFLAGS = @JSON_C_CFLAGS@ 317JSON_C_LIBS = @JSON_C_LIBS@ 318KRB5_CFLAGS = @KRB5_CFLAGS@ 319KRB5_CONFIG = @KRB5_CONFIG@ 320KRB5_LIBS = @KRB5_LIBS@ 321LATEXMK = @LATEXMK@ 322LD = @LD@ 323LDFLAGS = @LDFLAGS@ 324LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@ 325LIBCAP_LIBS = @LIBCAP_LIBS@ 326LIBIDN2_CFLAGS = @LIBIDN2_CFLAGS@ 327LIBIDN2_LIBS = @LIBIDN2_LIBS@ 328LIBNGHTTP2_CFLAGS = @LIBNGHTTP2_CFLAGS@ 329LIBNGHTTP2_LIBS = @LIBNGHTTP2_LIBS@ 330LIBOBJS = @LIBOBJS@ 331LIBS = @LIBS@ 332LIBTOOL = @LIBTOOL@ 333LIBUV_CFLAGS = @LIBUV_CFLAGS@ 334LIBUV_LIBS = @LIBUV_LIBS@ 335LIBXML2_CFLAGS = @LIBXML2_CFLAGS@ 336LIBXML2_LIBS = @LIBXML2_LIBS@ 337LIPO = @LIPO@ 338LMDB_CFLAGS = @LMDB_CFLAGS@ 339LMDB_LIBS = @LMDB_LIBS@ 340LN_S = @LN_S@ 341LTLIBOBJS = @LTLIBOBJS@ 342LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 343MAINT = @MAINT@ 344MAKEINFO = @MAKEINFO@ 345MANIFEST_TOOL = @MANIFEST_TOOL@ 346MAXMINDDB_CFLAGS = @MAXMINDDB_CFLAGS@ 347MAXMINDDB_LIBS = @MAXMINDDB_LIBS@ 348MAXMINDDB_PREFIX = @MAXMINDDB_PREFIX@ 349MKDIR_P = @MKDIR_P@ 350NC = @NC@ 351NM = @NM@ 352NMEDIT = @NMEDIT@ 353OBJDUMP = @OBJDUMP@ 354OBJEXT = @OBJEXT@ 355OPENSSL_CFLAGS = @OPENSSL_CFLAGS@ 356OPENSSL_LDFLAGS = @OPENSSL_LDFLAGS@ 357OPENSSL_LIBS = @OPENSSL_LIBS@ 358OTOOL = @OTOOL@ 359OTOOL64 = @OTOOL64@ 360PACKAGE = @PACKAGE@ 361PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 362PACKAGE_NAME = @PACKAGE_NAME@ 363PACKAGE_STRING = @PACKAGE_STRING@ 364PACKAGE_TARNAME = @PACKAGE_TARNAME@ 365PACKAGE_URL = @PACKAGE_URL@ 366PACKAGE_VERSION = @PACKAGE_VERSION@ 367PATH_SEPARATOR = @PATH_SEPARATOR@ 368PERL = @PERL@ 369PKG_CONFIG = @PKG_CONFIG@ 370PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 371PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 372PROTOC_C = @PROTOC_C@ 373PTHREAD_CC = @PTHREAD_CC@ 374PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ 375PTHREAD_CXX = @PTHREAD_CXX@ 376PTHREAD_LIBS = @PTHREAD_LIBS@ 377PYTEST = @PYTEST@ 378PYTHON = @PYTHON@ 379PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ 380PYTHON_PLATFORM = @PYTHON_PLATFORM@ 381PYTHON_PREFIX = @PYTHON_PREFIX@ 382PYTHON_VERSION = @PYTHON_VERSION@ 383RANLIB = @RANLIB@ 384READLINE_CFLAGS = @READLINE_CFLAGS@ 385READLINE_LIBS = @READLINE_LIBS@ 386RELEASE_DATE = @RELEASE_DATE@ 387SED = @SED@ 388SET_MAKE = @SET_MAKE@ 389SHELL = @SHELL@ 390SPHINX_BUILD = @SPHINX_BUILD@ 391STD_CFLAGS = @STD_CFLAGS@ 392STD_CPPFLAGS = @STD_CPPFLAGS@ 393STD_LDFLAGS = @STD_LDFLAGS@ 394STRIP = @STRIP@ 395TEST_CFLAGS = @TEST_CFLAGS@ 396VERSION = @VERSION@ 397XELATEX = @XELATEX@ 398XSLTPROC = @XSLTPROC@ 399ZLIB_CFLAGS = @ZLIB_CFLAGS@ 400ZLIB_LIBS = @ZLIB_LIBS@ 401abs_builddir = @abs_builddir@ 402abs_srcdir = @abs_srcdir@ 403abs_top_builddir = @abs_top_builddir@ 404abs_top_srcdir = @abs_top_srcdir@ 405ac_ct_AR = @ac_ct_AR@ 406ac_ct_CC = @ac_ct_CC@ 407ac_ct_CC_FOR_BUILD = @ac_ct_CC_FOR_BUILD@ 408ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 409am__include = @am__include@ 410am__leading_dot = @am__leading_dot@ 411am__quote = @am__quote@ 412am__tar = @am__tar@ 413am__untar = @am__untar@ 414ax_pthread_config = @ax_pthread_config@ 415bindir = @bindir@ 416build = @build@ 417build_alias = @build_alias@ 418build_cpu = @build_cpu@ 419build_os = @build_os@ 420build_vendor = @build_vendor@ 421builddir = @builddir@ 422datadir = @datadir@ 423datarootdir = @datarootdir@ 424docdir = @docdir@ 425dvidir = @dvidir@ 426exec_prefix = @exec_prefix@ 427host = @host@ 428host_alias = @host_alias@ 429host_cpu = @host_cpu@ 430host_os = @host_os@ 431host_vendor = @host_vendor@ 432htmldir = @htmldir@ 433includedir = @includedir@ 434infodir = @infodir@ 435install_sh = @install_sh@ 436libdir = @libdir@ 437libexecdir = @libexecdir@ 438localedir = @localedir@ 439localstatedir = @localstatedir@ 440mandir = @mandir@ 441mkdir_p = @mkdir_p@ 442oldincludedir = @oldincludedir@ 443pdfdir = @pdfdir@ 444pkgpyexecdir = @pkgpyexecdir@ 445pkgpythondir = @pkgpythondir@ 446prefix = @prefix@ 447program_transform_name = @program_transform_name@ 448psdir = @psdir@ 449pyexecdir = @pyexecdir@ 450pythondir = @pythondir@ 451runstatedir = @runstatedir@ 452sbindir = @sbindir@ 453sharedstatedir = @sharedstatedir@ 454srcdir = @srcdir@ 455sysconfdir = @sysconfdir@ 456target = @target@ 457target_alias = @target_alias@ 458target_cpu = @target_cpu@ 459target_os = @target_os@ 460target_vendor = @target_vendor@ 461top_build_prefix = @top_build_prefix@ 462top_builddir = @top_builddir@ 463top_srcdir = @top_srcdir@ 464ACLOCAL_AMFLAGS = -I $(top_srcdir)/m4 465AM_CFLAGS = \ 466 $(STD_CFLAGS) 467 468AM_CPPFLAGS = \ 469 $(STD_CPPFLAGS) \ 470 -include $(top_builddir)/config.h \ 471 -I$(srcdir)/include 472 473AM_LDFLAGS = $(STD_LDFLAGS) $(am__append_1) 474LDADD = 475LIBISC_CFLAGS = \ 476 -I$(top_srcdir)/include \ 477 -I$(top_srcdir)/lib/isc/include \ 478 -I$(top_builddir)/lib/isc/include 479 480LIBISC_LIBS = $(top_builddir)/lib/isc/libisc.la 481LIBDNS_CFLAGS = \ 482 -I$(top_srcdir)/lib/dns/include \ 483 -I$(top_builddir)/lib/dns/include 484 485LIBDNS_LIBS = \ 486 $(top_builddir)/lib/dns/libdns.la 487 488LIBNS_CFLAGS = \ 489 -I$(top_srcdir)/lib/ns/include 490 491LIBNS_LIBS = \ 492 $(top_builddir)/lib/ns/libns.la 493 494LIBIRS_CFLAGS = \ 495 -I$(top_srcdir)/lib/irs/include 496 497LIBIRS_LIBS = \ 498 $(top_builddir)/lib/irs/libirs.la 499 500LIBISCCFG_CFLAGS = \ 501 -I$(top_srcdir)/lib/isccfg/include 502 503LIBISCCFG_LIBS = \ 504 $(top_builddir)/lib/isccfg/libisccfg.la 505 506LIBISCCC_CFLAGS = \ 507 -I$(top_srcdir)/lib/isccc/include/ 508 509LIBISCCC_LIBS = \ 510 $(top_builddir)/lib/isccc/libisccc.la 511 512LIBBIND9_CFLAGS = \ 513 -I$(top_srcdir)/lib/bind9/include 514 515LIBBIND9_LIBS = \ 516 $(top_builddir)/lib/bind9/libbind9.la 517 518SUBDIRS = . lib doc bin fuzz $(am__append_2) 519BUILT_SOURCES = bind.keys.h 520CLEANFILES = bind.keys.h 521dist_sysconf_DATA = bind.keys 522EXTRA_DIST = \ 523 util/bindkeys.pl \ 524 contrib \ 525 CHANGES \ 526 COPYRIGHT \ 527 LICENSE \ 528 *.md 529 530all: $(BUILT_SOURCES) config.h 531 $(MAKE) $(AM_MAKEFLAGS) all-recursive 532 533.SUFFIXES: 534am--refresh: Makefile 535 @: 536$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/Makefile.top $(am__configure_deps) 537 @for dep in $?; do \ 538 case '$(am__configure_deps)' in \ 539 *$$dep*) \ 540 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 541 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 542 && exit 0; \ 543 exit 1;; \ 544 esac; \ 545 done; \ 546 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 547 $(am__cd) $(top_srcdir) && \ 548 $(AUTOMAKE) --foreign Makefile 549Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 550 @case '$?' in \ 551 *config.status*) \ 552 echo ' $(SHELL) ./config.status'; \ 553 $(SHELL) ./config.status;; \ 554 *) \ 555 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ 556 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ 557 esac; 558$(top_srcdir)/Makefile.top $(am__empty): 559 560$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 561 $(SHELL) ./config.status --recheck 562 563$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 564 $(am__cd) $(srcdir) && $(AUTOCONF) 565$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) 566 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 567$(am__aclocal_m4_deps): 568 569config.h: stamp-h1 570 @test -f $@ || rm -f stamp-h1 571 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 572 573stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 574 @rm -f stamp-h1 575 cd $(top_builddir) && $(SHELL) ./config.status config.h 576$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 577 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 578 rm -f stamp-h1 579 touch $@ 580 581distclean-hdr: 582 -rm -f config.h stamp-h1 583doc/doxygen/doxygen-input-filter: $(top_builddir)/config.status $(top_srcdir)/doc/doxygen/doxygen-input-filter.in 584 cd $(top_builddir) && $(SHELL) ./config.status $@ 585util/check-make-install: $(top_builddir)/config.status $(top_srcdir)/util/check-make-install.in 586 cd $(top_builddir) && $(SHELL) ./config.status $@ 587 588mostlyclean-libtool: 589 -rm -f *.lo 590 591clean-libtool: 592 -rm -rf .libs _libs 593 594distclean-libtool: 595 -rm -f libtool config.lt 596install-dist_sysconfDATA: $(dist_sysconf_DATA) 597 @$(NORMAL_INSTALL) 598 @list='$(dist_sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \ 599 if test -n "$$list"; then \ 600 echo " $(MKDIR_P) '$(DESTDIR)$(sysconfdir)'"; \ 601 $(MKDIR_P) "$(DESTDIR)$(sysconfdir)" || exit 1; \ 602 fi; \ 603 for p in $$list; do \ 604 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 605 echo "$$d$$p"; \ 606 done | $(am__base_list) | \ 607 while read files; do \ 608 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sysconfdir)'"; \ 609 $(INSTALL_DATA) $$files "$(DESTDIR)$(sysconfdir)" || exit $$?; \ 610 done 611 612uninstall-dist_sysconfDATA: 613 @$(NORMAL_UNINSTALL) 614 @list='$(dist_sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \ 615 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 616 dir='$(DESTDIR)$(sysconfdir)'; $(am__uninstall_files_from_dir) 617 618# This directory's subdirectories are mostly independent; you can cd 619# into them and run 'make' without going through this Makefile. 620# To change the values of 'make' variables: instead of editing Makefiles, 621# (1) if the variable is set in 'config.status', edit 'config.status' 622# (which will cause the Makefiles to be regenerated when you run 'make'); 623# (2) otherwise, pass the desired values on the 'make' command line. 624$(am__recursive_targets): 625 @fail=; \ 626 if $(am__make_keepgoing); then \ 627 failcom='fail=yes'; \ 628 else \ 629 failcom='exit 1'; \ 630 fi; \ 631 dot_seen=no; \ 632 target=`echo $@ | sed s/-recursive//`; \ 633 case "$@" in \ 634 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 635 *) list='$(SUBDIRS)' ;; \ 636 esac; \ 637 for subdir in $$list; do \ 638 echo "Making $$target in $$subdir"; \ 639 if test "$$subdir" = "."; then \ 640 dot_seen=yes; \ 641 local_target="$$target-am"; \ 642 else \ 643 local_target="$$target"; \ 644 fi; \ 645 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 646 || eval $$failcom; \ 647 done; \ 648 if test "$$dot_seen" = "no"; then \ 649 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 650 fi; test -z "$$fail" 651test-local: 652unit-local: 653doc-local: 654 655ID: $(am__tagged_files) 656 $(am__define_uniq_tagged_files); mkid -fID $$unique 657tags: tags-recursive 658TAGS: tags 659 660tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 661 set x; \ 662 here=`pwd`; \ 663 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 664 include_option=--etags-include; \ 665 empty_fix=.; \ 666 else \ 667 include_option=--include; \ 668 empty_fix=; \ 669 fi; \ 670 list='$(SUBDIRS)'; for subdir in $$list; do \ 671 if test "$$subdir" = .; then :; else \ 672 test ! -f $$subdir/TAGS || \ 673 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 674 fi; \ 675 done; \ 676 $(am__define_uniq_tagged_files); \ 677 shift; \ 678 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 679 test -n "$$unique" || unique=$$empty_fix; \ 680 if test $$# -gt 0; then \ 681 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 682 "$$@" $$unique; \ 683 else \ 684 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 685 $$unique; \ 686 fi; \ 687 fi 688ctags: ctags-recursive 689 690CTAGS: ctags 691ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 692 $(am__define_uniq_tagged_files); \ 693 test -z "$(CTAGS_ARGS)$$unique" \ 694 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 695 $$unique 696 697GTAGS: 698 here=`$(am__cd) $(top_builddir) && pwd` \ 699 && $(am__cd) $(top_srcdir) \ 700 && gtags -i $(GTAGS_ARGS) "$$here" 701cscope: cscope.files 702 test ! -s cscope.files \ 703 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 704clean-cscope: 705 -rm -f cscope.files 706cscope.files: clean-cscope cscopelist 707cscopelist: cscopelist-recursive 708 709cscopelist-am: $(am__tagged_files) 710 list='$(am__tagged_files)'; \ 711 case "$(srcdir)" in \ 712 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 713 *) sdir=$(subdir)/$(srcdir) ;; \ 714 esac; \ 715 for i in $$list; do \ 716 if test -f "$$i"; then \ 717 echo "$(subdir)/$$i"; \ 718 else \ 719 echo "$$sdir/$$i"; \ 720 fi; \ 721 done >> $(top_builddir)/cscope.files 722 723distclean-tags: 724 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 725 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 726distdir: $(BUILT_SOURCES) 727 $(MAKE) $(AM_MAKEFLAGS) distdir-am 728 729distdir-am: $(DISTFILES) 730 $(am__remove_distdir) 731 test -d "$(distdir)" || mkdir "$(distdir)" 732 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 733 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 734 list='$(DISTFILES)'; \ 735 dist_files=`for file in $$list; do echo $$file; done | \ 736 sed -e "s|^$$srcdirstrip/||;t" \ 737 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 738 case $$dist_files in \ 739 */*) $(MKDIR_P) `echo "$$dist_files" | \ 740 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 741 sort -u` ;; \ 742 esac; \ 743 for file in $$dist_files; do \ 744 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 745 if test -d $$d/$$file; then \ 746 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 747 if test -d "$(distdir)/$$file"; then \ 748 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 749 fi; \ 750 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 751 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 752 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 753 fi; \ 754 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 755 else \ 756 test -f "$(distdir)/$$file" \ 757 || cp -p $$d/$$file "$(distdir)/$$file" \ 758 || exit 1; \ 759 fi; \ 760 done 761 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 762 if test "$$subdir" = .; then :; else \ 763 $(am__make_dryrun) \ 764 || test -d "$(distdir)/$$subdir" \ 765 || $(MKDIR_P) "$(distdir)/$$subdir" \ 766 || exit 1; \ 767 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 768 $(am__relativize); \ 769 new_distdir=$$reldir; \ 770 dir1=$$subdir; dir2="$(top_distdir)"; \ 771 $(am__relativize); \ 772 new_top_distdir=$$reldir; \ 773 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 774 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 775 ($(am__cd) $$subdir && \ 776 $(MAKE) $(AM_MAKEFLAGS) \ 777 top_distdir="$$new_top_distdir" \ 778 distdir="$$new_distdir" \ 779 am__remove_distdir=: \ 780 am__skip_length_check=: \ 781 am__skip_mode_fix=: \ 782 distdir) \ 783 || exit 1; \ 784 fi; \ 785 done 786 $(MAKE) $(AM_MAKEFLAGS) \ 787 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 788 dist-hook 789 -test -n "$(am__skip_mode_fix)" \ 790 || find "$(distdir)" -type d ! -perm -755 \ 791 -exec chmod u+rwx,go+rx {} \; -o \ 792 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 793 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 794 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 795 || chmod -R a+r "$(distdir)" 796dist-gzip: distdir 797 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz 798 $(am__post_remove_distdir) 799 800dist-bzip2: distdir 801 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 802 $(am__post_remove_distdir) 803 804dist-lzip: distdir 805 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 806 $(am__post_remove_distdir) 807dist-xz: distdir 808 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 809 $(am__post_remove_distdir) 810 811dist-zstd: distdir 812 tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst 813 $(am__post_remove_distdir) 814 815dist-tarZ: distdir 816 @echo WARNING: "Support for distribution archives compressed with" \ 817 "legacy program 'compress' is deprecated." >&2 818 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 819 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 820 $(am__post_remove_distdir) 821 822dist-shar: distdir 823 @echo WARNING: "Support for shar distribution archives is" \ 824 "deprecated." >&2 825 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 826 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz 827 $(am__post_remove_distdir) 828 829dist-zip: distdir 830 -rm -f $(distdir).zip 831 zip -rq $(distdir).zip $(distdir) 832 $(am__post_remove_distdir) 833 834dist dist-all: 835 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 836 $(am__post_remove_distdir) 837 838# This target untars the dist file and tries a VPATH configuration. Then 839# it guarantees that the distribution is self-contained by making another 840# tarfile. 841distcheck: dist 842 case '$(DIST_ARCHIVES)' in \ 843 *.tar.gz*) \ 844 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ 845 *.tar.bz2*) \ 846 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 847 *.tar.lz*) \ 848 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 849 *.tar.xz*) \ 850 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 851 *.tar.Z*) \ 852 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 853 *.shar.gz*) \ 854 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ 855 *.zip*) \ 856 unzip $(distdir).zip ;;\ 857 *.tar.zst*) \ 858 zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ 859 esac 860 chmod -R a-w $(distdir) 861 chmod u+w $(distdir) 862 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 863 chmod a-w $(distdir) 864 test -d $(distdir)/_build || exit 0; \ 865 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 866 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 867 && am__cwd=`pwd` \ 868 && $(am__cd) $(distdir)/_build/sub \ 869 && ../../configure \ 870 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 871 $(DISTCHECK_CONFIGURE_FLAGS) \ 872 --srcdir=../.. --prefix="$$dc_install_base" \ 873 && $(MAKE) $(AM_MAKEFLAGS) \ 874 && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ 875 && $(MAKE) $(AM_MAKEFLAGS) check \ 876 && $(MAKE) $(AM_MAKEFLAGS) install \ 877 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 878 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 879 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 880 distuninstallcheck \ 881 && chmod -R a-w "$$dc_install_base" \ 882 && ({ \ 883 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 884 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 885 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 886 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 887 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 888 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 889 && rm -rf "$$dc_destdir" \ 890 && $(MAKE) $(AM_MAKEFLAGS) dist \ 891 && rm -rf $(DIST_ARCHIVES) \ 892 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 893 && cd "$$am__cwd" \ 894 || exit 1 895 $(am__post_remove_distdir) 896 @(echo "$(distdir) archives ready for distribution: "; \ 897 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 898 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 899distuninstallcheck: 900 @test -n '$(distuninstallcheck_dir)' || { \ 901 echo 'ERROR: trying to run $@ with an empty' \ 902 '$$(distuninstallcheck_dir)' >&2; \ 903 exit 1; \ 904 }; \ 905 $(am__cd) '$(distuninstallcheck_dir)' || { \ 906 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 907 exit 1; \ 908 }; \ 909 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 910 || { echo "ERROR: files left after uninstall:" ; \ 911 if test -n "$(DESTDIR)"; then \ 912 echo " (check DESTDIR support)"; \ 913 fi ; \ 914 $(distuninstallcheck_listfiles) ; \ 915 exit 1; } >&2 916distcleancheck: distclean 917 @if test '$(srcdir)' = . ; then \ 918 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 919 exit 1 ; \ 920 fi 921 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 922 || { echo "ERROR: files left in build directory after distclean:" ; \ 923 $(distcleancheck_listfiles) ; \ 924 exit 1; } >&2 925check-am: all-am 926check: $(BUILT_SOURCES) 927 $(MAKE) $(AM_MAKEFLAGS) check-recursive 928all-am: Makefile $(DATA) config.h 929installdirs: installdirs-recursive 930installdirs-am: 931 for dir in "$(DESTDIR)$(sysconfdir)"; do \ 932 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 933 done 934install: $(BUILT_SOURCES) 935 $(MAKE) $(AM_MAKEFLAGS) install-recursive 936install-exec: $(BUILT_SOURCES) 937 $(MAKE) $(AM_MAKEFLAGS) install-exec-recursive 938install-data: install-data-recursive 939uninstall: uninstall-recursive 940 941install-am: all-am 942 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 943 944installcheck: installcheck-recursive 945install-strip: 946 if test -z '$(STRIP)'; then \ 947 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 948 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 949 install; \ 950 else \ 951 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 952 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 953 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 954 fi 955mostlyclean-generic: 956 957clean-generic: 958 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) 959 960distclean-generic: 961 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 962 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 963 964maintainer-clean-generic: 965 @echo "This command is intended for maintainers to use" 966 @echo "it deletes files that may require special tools to rebuild." 967 -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) 968clean: clean-recursive 969 970clean-am: clean-generic clean-libtool mostlyclean-am 971 972distclean: distclean-recursive 973 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 974 -rm -f Makefile 975distclean-am: clean-am distclean-generic distclean-hdr \ 976 distclean-libtool distclean-tags 977 978doc: doc-recursive 979 980doc-am: doc-local 981 982dvi: dvi-recursive 983 984dvi-am: 985 986html: html-recursive 987 988html-am: 989 990info: info-recursive 991 992info-am: 993 994install-data-am: 995 996install-dvi: install-dvi-recursive 997 998install-dvi-am: 999 1000install-exec-am: install-dist_sysconfDATA 1001 1002install-html: install-html-recursive 1003 1004install-html-am: 1005 1006install-info: install-info-recursive 1007 1008install-info-am: 1009 1010install-man: 1011 1012install-pdf: install-pdf-recursive 1013 1014install-pdf-am: 1015 1016install-ps: install-ps-recursive 1017 1018install-ps-am: 1019 1020installcheck-am: 1021 1022maintainer-clean: maintainer-clean-recursive 1023 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 1024 -rm -rf $(top_srcdir)/autom4te.cache 1025 -rm -f Makefile 1026maintainer-clean-am: distclean-am maintainer-clean-generic 1027 1028mostlyclean: mostlyclean-recursive 1029 1030mostlyclean-am: mostlyclean-generic mostlyclean-libtool 1031 1032pdf: pdf-recursive 1033 1034pdf-am: 1035 1036ps: ps-recursive 1037 1038ps-am: 1039 1040test: test-recursive 1041 1042test-am: test-local 1043 1044uninstall-am: uninstall-dist_sysconfDATA 1045 1046unit: unit-recursive 1047 1048unit-am: unit-local 1049 1050.MAKE: $(am__recursive_targets) all check install install-am \ 1051 install-exec install-strip 1052 1053.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 1054 am--refresh check check-am clean clean-cscope clean-generic \ 1055 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 1056 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ 1057 dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \ 1058 distclean-generic distclean-hdr distclean-libtool \ 1059 distclean-tags distcleancheck distdir distuninstallcheck \ 1060 doc-am doc-local dvi dvi-am html html-am info info-am install \ 1061 install-am install-data install-data-am \ 1062 install-dist_sysconfDATA install-dvi install-dvi-am \ 1063 install-exec install-exec-am install-html install-html-am \ 1064 install-info install-info-am install-man install-pdf \ 1065 install-pdf-am install-ps install-ps-am install-strip \ 1066 installcheck installcheck-am installdirs installdirs-am \ 1067 maintainer-clean maintainer-clean-generic mostlyclean \ 1068 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ 1069 tags tags-am test-am test-local uninstall uninstall-am \ 1070 uninstall-dist_sysconfDATA unit-am unit-local 1071 1072.PRECIOUS: Makefile 1073 1074 1075bind.keys.h: bind.keys Makefile 1076 ${PERL} ${top_srcdir}/util/bindkeys.pl ${top_srcdir}/bind.keys > $@ 1077 1078.PHONY: doc 1079 1080dist-hook: 1081 find $(distdir) -type f -name .gitignore -delete 1082 git rev-parse --short HEAD | cut -b1-7 > $(distdir)/srcid 1083 1084# Tell versions [3.59,3.63) of GNU make to not export all variables. 1085# Otherwise a system limit (for SysV at least) may be exceeded. 1086.NOEXPORT: 1087