1/* Definitions of target machine for GNU compiler. 2 Matsushita MN10300 series 3 Copyright (C) 1996-2020 Free Software Foundation, Inc. 4 Contributed by Jeff Law (law@cygnus.com). 5 6 This file is part of GCC. 7 8 GCC is free software; you can redistribute it and/or modify 9 it under the terms of the GNU General Public License as published by 10 the Free Software Foundation; either version 3, or (at your option) 11 any later version. 12 13 GCC is distributed in the hope that it will be useful, 14 but WITHOUT ANY WARRANTY; without even the implied warranty of 15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 GNU General Public License for more details. 17 18 You should have received a copy of the GNU General Public License 19 along with GCC; see the file COPYING3. If not see 20 <http://www.gnu.org/licenses/>. */ 21 22#undef ASM_SPEC 23#undef LIB_SPEC 24#undef ENDFILE_SPEC 25#undef LINK_SPEC 26#define LINK_SPEC "%{mrelax:%{!r:--relax}}" 27#undef STARTFILE_SPEC 28#define STARTFILE_SPEC "%{!mno-crt0:%{!shared:%{pg:gcrt0%O%s}%{!pg:%{p:mcrt0%O%s}%{!p:crt0%O%s}}}}" 29 30/* Names to predefine in the preprocessor for this target machine. */ 31 32#define TARGET_CPU_CPP_BUILTINS() \ 33 do \ 34 { \ 35 builtin_define ("__mn10300__"); \ 36 builtin_define ("__MN10300__"); \ 37 builtin_assert ("cpu=mn10300"); \ 38 builtin_assert ("machine=mn10300"); \ 39 \ 40 if (TARGET_AM34) \ 41 { \ 42 builtin_define ("__AM33__=4"); \ 43 builtin_define ("__AM34__"); \ 44 } \ 45 else if (TARGET_AM33_2) \ 46 { \ 47 builtin_define ("__AM33__=2"); \ 48 builtin_define ("__AM33_2__"); \ 49 } \ 50 else if (TARGET_AM33) \ 51 builtin_define ("__AM33__=1"); \ 52 \ 53 builtin_define (TARGET_ALLOW_LIW ? \ 54 "__LIW__" : "__NO_LIW__");\ 55 \ 56 builtin_define (TARGET_ALLOW_SETLB ? \ 57 "__SETLB__" : "__NO_SETLB__");\ 58 } \ 59 while (0) 60 61#ifndef MN10300_OPTS_H 62#include "config/mn10300/mn10300-opts.h" 63#endif 64 65extern enum processor_type mn10300_tune_cpu; 66 67#define TARGET_AM33 (mn10300_processor >= PROCESSOR_AM33) 68#define TARGET_AM33_2 (mn10300_processor >= PROCESSOR_AM33_2) 69#define TARGET_AM34 (mn10300_processor >= PROCESSOR_AM34) 70 71#ifndef PROCESSOR_DEFAULT 72#define PROCESSOR_DEFAULT PROCESSOR_MN10300 73#endif 74 75 76/* Target machine storage layout */ 77 78/* Define this if most significant bit is lowest numbered 79 in instructions that operate on numbered bit-fields. 80 This is not true on the Matsushita MN1003. */ 81#define BITS_BIG_ENDIAN 0 82 83/* Define this if most significant byte of a word is the lowest numbered. */ 84/* This is not true on the Matsushita MN10300. */ 85#define BYTES_BIG_ENDIAN 0 86 87/* Define this if most significant word of a multiword number is lowest 88 numbered. 89 This is not true on the Matsushita MN10300. */ 90#define WORDS_BIG_ENDIAN 0 91 92/* Width of a word, in units (bytes). */ 93#define UNITS_PER_WORD 4 94 95/* Allocation boundary (in *bits*) for storing arguments in argument list. */ 96#define PARM_BOUNDARY 32 97 98/* The stack goes in 32-bit lumps. */ 99#define STACK_BOUNDARY 32 100 101/* Allocation boundary (in *bits*) for the code of a function. 102 8 is the minimum boundary; it's unclear if bigger alignments 103 would improve performance. */ 104#define FUNCTION_BOUNDARY 8 105 106/* No data type wants to be aligned rounder than this. */ 107#define BIGGEST_ALIGNMENT 32 108 109/* Alignment of field after `int : 0' in a structure. */ 110#define EMPTY_FIELD_BOUNDARY 32 111 112/* Define this if move instructions will actually fail to work 113 when given unaligned data. */ 114#define STRICT_ALIGNMENT 1 115 116/* Define this as 1 if `char' should by default be signed; else as 0. */ 117#define DEFAULT_SIGNED_CHAR 0 118 119#undef SIZE_TYPE 120#define SIZE_TYPE "unsigned int" 121 122#undef PTRDIFF_TYPE 123#define PTRDIFF_TYPE "int" 124 125#undef WCHAR_TYPE 126#define WCHAR_TYPE "long int" 127 128#undef WCHAR_TYPE_SIZE 129#define WCHAR_TYPE_SIZE BITS_PER_WORD 130 131/* Standard register usage. */ 132 133/* Number of actual hardware registers. 134 The hardware registers are assigned numbers for the compiler 135 from 0 to just below FIRST_PSEUDO_REGISTER. 136 137 All registers that the compiler knows about must be given numbers, 138 even those that are not normally considered general registers. */ 139 140#define FIRST_PSEUDO_REGISTER 52 141 142/* Specify machine-specific register numbers. The commented out entries 143 are defined in mn10300.md. */ 144#define FIRST_DATA_REGNUM 0 145#define LAST_DATA_REGNUM 3 146#define FIRST_ADDRESS_REGNUM 4 147/* #define PIC_REG 6 */ 148#define LAST_ADDRESS_REGNUM 8 149/* #define SP_REG 9 */ 150#define FIRST_EXTENDED_REGNUM 10 151#define LAST_EXTENDED_REGNUM 17 152#define FIRST_FP_REGNUM 18 153#define LAST_FP_REGNUM 49 154/* #define MDR_REG 50 */ 155/* #define CC_REG 51 */ 156#define FIRST_ARGUMENT_REGNUM 0 157 158/* Specify the registers used for certain standard purposes. 159 The values of these macros are register numbers. */ 160 161/* Register to use for pushing function arguments. */ 162#define STACK_POINTER_REGNUM (LAST_ADDRESS_REGNUM + 1) 163 164/* Base register for access to local variables of the function. */ 165#define FRAME_POINTER_REGNUM (LAST_ADDRESS_REGNUM - 1) 166 167/* Base register for access to arguments of the function. This 168 is a fake register and will be eliminated into either the frame 169 pointer or stack pointer. */ 170#define ARG_POINTER_REGNUM LAST_ADDRESS_REGNUM 171 172/* Register in which static-chain is passed to a function. */ 173#define STATIC_CHAIN_REGNUM (FIRST_ADDRESS_REGNUM + 1) 174 175/* 1 for registers that have pervasive standard uses 176 and are not available for the register allocator. */ 177 178#define FIXED_REGISTERS \ 179 { 0, 0, 0, 0, /* data regs */ \ 180 0, 0, 0, 0, /* addr regs */ \ 181 1, /* arg reg */ \ 182 1, /* sp reg */ \ 183 0, 0, 0, 0, 0, 0, 0, 0, /* extended regs */ \ 184 0, 0, /* fp regs (18-19) */ \ 185 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* fp regs (20-29) */ \ 186 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* fp regs (30-39) */ \ 187 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* fp regs (40-49) */ \ 188 0, /* mdr reg */ \ 189 1 /* cc reg */ \ 190 } 191 192/* 1 for registers not available across function calls. 193 These must include the FIXED_REGISTERS and also any 194 registers that can be used without being saved. 195 The latter must include the registers where values are returned 196 and the register where structure-value addresses are passed. 197 Aside from that, you can include as many other registers as you 198 like. */ 199 200#define CALL_REALLY_USED_REGISTERS \ 201 { 1, 1, 0, 0, /* data regs */ \ 202 1, 1, 0, 0, /* addr regs */ \ 203 1, /* arg reg */ \ 204 1, /* sp reg */ \ 205 1, 1, 1, 1, 0, 0, 0, 0, /* extended regs */ \ 206 1, 1, /* fp regs (18-19) */ \ 207 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, /* fp regs (20-29) */ \ 208 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, /* fp regs (30-39) */ \ 209 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* fp regs (40-49) */ \ 210 1, /* mdr reg */ \ 211 1 /* cc reg */ \ 212 } 213 214#define REG_ALLOC_ORDER \ 215 { 0, 1, 4, 5, 2, 3, 6, 7, 10, 11, 12, 13, 14, 15, 16, 17, 8, 9 \ 216 , 42, 43, 44, 45, 46, 47, 48, 49, 34, 35, 36, 37, 38, 39, 40, 41 \ 217 , 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 50, 51 \ 218 } 219 220/* 4 data, and effectively 3 address registers is small as far as I'm 221 concerned. */ 222#define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P hook_bool_mode_true 223 224/* Define the classes of registers for register constraints in the 225 machine description. Also define ranges of constants. 226 227 One of the classes must always be named ALL_REGS and include all hard regs. 228 If there is more than one class, another class must be named NO_REGS 229 and contain no registers. 230 231 The name GENERAL_REGS must be the name of a class (or an alias for 232 another name such as ALL_REGS). This is the class of registers 233 that is allowed by "g" or "r" in a register constraint. 234 Also, registers outside this class are allocated only when 235 instructions express preferences for them. 236 237 The classes must be numbered in nondecreasing order; that is, 238 a larger-numbered class must never be contained completely 239 in a smaller-numbered class. 240 241 For any two classes, it is very desirable that there be another 242 class that represents their union. */ 243 244enum reg_class 245{ 246 NO_REGS, DATA_REGS, ADDRESS_REGS, SP_REGS, SP_OR_ADDRESS_REGS, 247 EXTENDED_REGS, FP_REGS, FP_ACC_REGS, CC_REGS, MDR_REGS, 248 GENERAL_REGS, SP_OR_GENERAL_REGS, ALL_REGS, LIM_REG_CLASSES 249}; 250 251#define N_REG_CLASSES (int) LIM_REG_CLASSES 252 253/* Give names of register classes as strings for dump file. */ 254 255#define REG_CLASS_NAMES \ 256{ "NO_REGS", "DATA_REGS", "ADDRESS_REGS", "SP_REGS", "SP_OR_ADDRESS_REGS", \ 257 "EXTENDED_REGS", "FP_REGS", "FP_ACC_REGS", "CC_REGS", "MDR_REGS", \ 258 "GENERAL_REGS", "SP_OR_GENERAL_REGS", "ALL_REGS", "LIM_REGS" \ 259} 260 261/* Define which registers fit in which classes. 262 This is an initializer for a vector of HARD_REG_SET 263 of length N_REG_CLASSES. */ 264 265#define REG_CLASS_CONTENTS \ 266{ { 0, 0 }, /* No regs */ \ 267 { 0x0000000f, 0 }, /* DATA_REGS */ \ 268 { 0x000001f0, 0 }, /* ADDRESS_REGS */ \ 269 { 0x00000200, 0 }, /* SP_REGS */ \ 270 { 0x000003f0, 0 }, /* SP_OR_ADDRESS_REGS */ \ 271 { 0x0003fc00, 0 }, /* EXTENDED_REGS */ \ 272 { 0xfffc0000, 0x3ffff },/* FP_REGS */ \ 273 { 0x03fc0000, 0 }, /* FP_ACC_REGS */ \ 274 { 0x00000000, 0x80000 },/* CC_REGS */ \ 275 { 0x00000000, 0x40000 },/* MDR_REGS */ \ 276 { 0x0003fdff, 0 }, /* GENERAL_REGS */ \ 277 { 0x0003ffff, 0 }, /* SP_OR_GENERAL_REGS */ \ 278 { 0xffffffff, 0xfffff } /* ALL_REGS */ \ 279} 280 281/* The same information, inverted: 282 Return the class number of the smallest class containing 283 reg number REGNO. This could be a conditional expression 284 or could index an array. */ 285 286#define REGNO_REG_CLASS(REGNO) \ 287 ((REGNO) <= LAST_DATA_REGNUM ? DATA_REGS : \ 288 (REGNO) <= LAST_ADDRESS_REGNUM ? ADDRESS_REGS : \ 289 (REGNO) == STACK_POINTER_REGNUM ? SP_REGS : \ 290 (REGNO) <= LAST_EXTENDED_REGNUM ? EXTENDED_REGS : \ 291 (REGNO) <= LAST_FP_REGNUM ? FP_REGS : \ 292 (REGNO) == MDR_REG ? MDR_REGS : \ 293 (REGNO) == CC_REG ? CC_REGS : \ 294 NO_REGS) 295 296/* The class value for index registers, and the one for base regs. */ 297#define INDEX_REG_CLASS \ 298 (TARGET_AM33 ? GENERAL_REGS : DATA_REGS) 299#define BASE_REG_CLASS \ 300 (TARGET_AM33 ? SP_OR_GENERAL_REGS : SP_OR_ADDRESS_REGS) 301 302/* Macros to check register numbers against specific register classes. */ 303 304/* The macros REG_OK_FOR..._P assume that the arg is a REG rtx 305 and check its validity for a certain class. 306 We have two alternate definitions for each of them. 307 The usual definition accepts all pseudo regs; the other rejects 308 them unless they have been allocated suitable hard regs. 309 The symbol REG_OK_STRICT causes the latter definition to be used. 310 311 Most source files want to accept pseudo regs in the hope that 312 they will get allocated to the class that the insn wants them to be in. 313 Source files for reload pass need to be strict. 314 After reload, it makes no difference, since pseudo regs have 315 been eliminated by then. */ 316 317/* These assume that REGNO is a hard or pseudo reg number. 318 They give nonzero only if REGNO is a hard reg of the suitable class 319 or a pseudo reg currently allocated to a suitable hard reg. 320 Since they use reg_renumber, they are safe only once reg_renumber 321 has been allocated, which happens in reginfo.c during register 322 allocation. */ 323 324#ifndef REG_OK_STRICT 325# define REG_STRICT 0 326#else 327# define REG_STRICT 1 328#endif 329 330#define REGNO_DATA_P(regno, strict) \ 331 mn10300_regno_in_class_p (regno, DATA_REGS, strict) 332#define REGNO_ADDRESS_P(regno, strict) \ 333 mn10300_regno_in_class_p (regno, ADDRESS_REGS, strict) 334#define REGNO_EXTENDED_P(regno, strict) \ 335 mn10300_regno_in_class_p (regno, EXTENDED_REGS, strict) 336#define REGNO_GENERAL_P(regno, strict) \ 337 mn10300_regno_in_class_p (regno, GENERAL_REGS, strict) 338 339#define REGNO_STRICT_OK_FOR_BASE_P(regno, strict) \ 340 mn10300_regno_in_class_p (regno, BASE_REG_CLASS, strict) 341#define REGNO_OK_FOR_BASE_P(regno) \ 342 (REGNO_STRICT_OK_FOR_BASE_P ((regno), REG_STRICT)) 343#define REG_OK_FOR_BASE_P(X) \ 344 (REGNO_OK_FOR_BASE_P (REGNO (X))) 345 346#define REGNO_STRICT_OK_FOR_BIT_BASE_P(regno, strict) \ 347 mn10300_regno_in_class_p (regno, ADDRESS_REGS, strict) 348#define REGNO_OK_FOR_BIT_BASE_P(regno) \ 349 (REGNO_STRICT_OK_FOR_BIT_BASE_P ((regno), REG_STRICT)) 350#define REG_OK_FOR_BIT_BASE_P(X) \ 351 (REGNO_OK_FOR_BIT_BASE_P (REGNO (X))) 352 353#define REGNO_STRICT_OK_FOR_INDEX_P(regno, strict) \ 354 mn10300_regno_in_class_p (regno, INDEX_REG_CLASS, strict) 355#define REGNO_OK_FOR_INDEX_P(regno) \ 356 (REGNO_STRICT_OK_FOR_INDEX_P ((regno), REG_STRICT)) 357#define REG_OK_FOR_INDEX_P(X) \ 358 (REGNO_OK_FOR_INDEX_P (REGNO (X))) 359 360#define LIMIT_RELOAD_CLASS(MODE, CLASS) \ 361 (!TARGET_AM33 && (MODE == QImode || MODE == HImode) ? DATA_REGS : CLASS) 362 363/* A class that contains registers which the compiler must always 364 access in a mode that is the same size as the mode in which it 365 loaded the register. */ 366#define CLASS_CANNOT_CHANGE_SIZE FP_REGS 367 368/* Return 1 if VALUE is in the range specified. */ 369 370#define INT_8_BITS(VALUE) ((unsigned) (VALUE) + 0x80 < 0x100) 371#define INT_16_BITS(VALUE) ((unsigned) (VALUE) + 0x8000 < 0x10000) 372 373 374/* Stack layout; function entry, exit and calling. */ 375 376/* Define this if pushing a word on the stack 377 makes the stack pointer a smaller address. */ 378 379#define STACK_GROWS_DOWNWARD 1 380 381/* Define this to nonzero if the nominal address of the stack frame 382 is at the high-address end of the local variables; 383 that is, each additional local variable allocated 384 goes at a more negative offset in the frame. */ 385 386#define FRAME_GROWS_DOWNWARD 1 387 388/* Offset of first parameter from the argument pointer register value. */ 389/* Is equal to the size of the saved fp + pc, even if an fp isn't 390 saved since the value is used before we know. */ 391 392#define FIRST_PARM_OFFSET(FNDECL) 4 393 394/* But the CFA is at the arg pointer directly, not at the first argument. */ 395#define ARG_POINTER_CFA_OFFSET(FNDECL) 0 396 397#define ELIMINABLE_REGS \ 398{{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ 399 { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \ 400 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}} 401 402#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ 403 OFFSET = mn10300_initial_offset (FROM, TO) 404 405/* We use d0/d1 for passing parameters, so allocate 8 bytes of space 406 for a register flushback area. */ 407#define REG_PARM_STACK_SPACE(DECL) 8 408#define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1 409#define ACCUMULATE_OUTGOING_ARGS 1 410 411/* So we can allocate space for return pointers once for the function 412 instead of around every call. */ 413#define STACK_POINTER_OFFSET 4 414 415/* 1 if N is a possible register number for function argument passing. 416 On the MN10300, d0 and d1 are used in this way. */ 417 418#define FUNCTION_ARG_REGNO_P(N) ((N) <= 1) 419 420 421/* Define a data type for recording info about an argument list 422 during the scan of that argument list. This data type should 423 hold all necessary information about the function itself 424 and about the args processed so far, enough to enable macros 425 such as FUNCTION_ARG to determine where the next arg should go. 426 427 On the MN10300, this is a single integer, which is a number of bytes 428 of arguments scanned so far. */ 429 430#define CUMULATIVE_ARGS struct cum_arg 431 432struct cum_arg 433{ 434 int nbytes; 435}; 436 437/* Initialize a variable CUM of type CUMULATIVE_ARGS 438 for a call to a function whose data type is FNTYPE. 439 For a library call, FNTYPE is 0. 440 441 On the MN10300, the offset starts at 0. */ 442 443#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \ 444 ((CUM).nbytes = 0) 445 446#define FUNCTION_VALUE_REGNO_P(N) mn10300_function_value_regno_p (N) 447 448#define DEFAULT_PCC_STRUCT_RETURN 0 449 450/* EXIT_IGNORE_STACK should be nonzero if, when returning from a function, 451 the stack pointer does not matter. The value is tested only in 452 functions that have frame pointers. 453 No definition is equivalent to always zero. */ 454 455#define EXIT_IGNORE_STACK 1 456 457/* Output assembler code to FILE to increment profiler label # LABELNO 458 for profiling a function entry. */ 459 460#define FUNCTION_PROFILER(FILE, LABELNO) ; 461 462/* Length in units of the trampoline for entering a nested function. */ 463 464#define TRAMPOLINE_SIZE 16 465#define TRAMPOLINE_ALIGNMENT 32 466 467/* A C expression whose value is RTL representing the value of the return 468 address for the frame COUNT steps up from the current frame. 469 470 On the mn10300, the return address is not at a constant location 471 due to the frame layout. Luckily, it is at a constant offset from 472 the argument pointer, so we define RETURN_ADDR_RTX to return a 473 MEM using arg_pointer_rtx. Reload will replace arg_pointer_rtx 474 with a reference to the stack/frame pointer + an appropriate offset. */ 475 476#define RETURN_ADDR_RTX(COUNT, FRAME) \ 477 ((COUNT == 0) \ 478 ? gen_rtx_MEM (Pmode, arg_pointer_rtx) \ 479 : (rtx) 0) 480 481/* The return address is saved both in the stack and in MDR. Using 482 the stack location is handiest for what unwinding needs. */ 483#define INCOMING_RETURN_ADDR_RTX \ 484 gen_rtx_MEM (Pmode, gen_rtx_REG (Pmode, STACK_POINTER_REGNUM)) 485 486/* Maximum number of registers that can appear in a valid memory address. */ 487 488#define MAX_REGS_PER_ADDRESS 2 489 490 491/* We have post-increments. */ 492#define HAVE_POST_INCREMENT TARGET_AM33 493#define HAVE_POST_MODIFY_DISP TARGET_AM33 494 495/* ... But we don't want to use them for block moves. Small offsets are 496 just as effective, at least for inline block move sizes, and appears 497 to produce cleaner code. */ 498#define USE_LOAD_POST_INCREMENT(M) 0 499#define USE_STORE_POST_INCREMENT(M) 0 500 501/* Accept either REG or SUBREG where a register is valid. */ 502 503#define RTX_OK_FOR_BASE_P(X, strict) \ 504 ((REG_P (X) && REGNO_STRICT_OK_FOR_BASE_P (REGNO (X), \ 505 (strict))) \ 506 || (GET_CODE (X) == SUBREG && REG_P (SUBREG_REG (X)) \ 507 && REGNO_STRICT_OK_FOR_BASE_P (REGNO (SUBREG_REG (X)), \ 508 (strict)))) 509 510#define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_L,WIN) \ 511do { \ 512 rtx new_x = mn10300_legitimize_reload_address (X, MODE, OPNUM, TYPE, IND_L); \ 513 if (new_x) \ 514 { \ 515 X = new_x; \ 516 goto WIN; \ 517 } \ 518} while (0) 519 520 521/* Zero if this needs fixing up to become PIC. */ 522 523#define LEGITIMATE_PIC_OPERAND_P(X) \ 524 mn10300_legitimate_pic_operand_p (X) 525 526/* Register to hold the addressing base for 527 position independent code access to data items. */ 528#define PIC_OFFSET_TABLE_REGNUM PIC_REG 529 530/* The name of the pseudo-symbol representing the Global Offset Table. */ 531#define GOT_SYMBOL_NAME "*_GLOBAL_OFFSET_TABLE_" 532 533#define SYMBOLIC_CONST_P(X) \ 534((GET_CODE (X) == SYMBOL_REF || GET_CODE (X) == LABEL_REF) \ 535 && ! LEGITIMATE_PIC_OPERAND_P (X)) 536 537/* Non-global SYMBOL_REFs have SYMBOL_REF_FLAG enabled. */ 538#define MN10300_GLOBAL_P(X) (! SYMBOL_REF_FLAG (X)) 539 540#define SELECT_CC_MODE(OP, X, Y) mn10300_select_cc_mode (OP, X, Y) 541#define REVERSIBLE_CC_MODE(MODE) 0 542 543/* Nonzero if access to memory by bytes or half words is no faster 544 than accessing full words. */ 545#define SLOW_BYTE_ACCESS 1 546 547#define NO_FUNCTION_CSE 1 548 549/* According expr.c, a value of around 6 should minimize code size, and 550 for the MN10300 series, that's our primary concern. */ 551#define MOVE_RATIO(speed) 6 552 553#define TEXT_SECTION_ASM_OP "\t.section .text" 554#define DATA_SECTION_ASM_OP "\t.section .data" 555#define BSS_SECTION_ASM_OP "\t.section .bss" 556 557#define ASM_COMMENT_START "#" 558 559/* Output to assembler file text saying following lines 560 may contain character constants, extra white space, comments, etc. */ 561 562#define ASM_APP_ON "#APP\n" 563 564/* Output to assembler file text saying following lines 565 no longer contain unusual constructs. */ 566 567#define ASM_APP_OFF "#NO_APP\n" 568 569#undef USER_LABEL_PREFIX 570#define USER_LABEL_PREFIX "_" 571 572/* This says how to output the assembler to define a global 573 uninitialized but not common symbol. 574 Try to use asm_output_bss to implement this macro. */ 575 576#define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \ 577 asm_output_aligned_bss ((FILE), (DECL), (NAME), (SIZE), (ALIGN)) 578 579/* Globalizing directive for a label. */ 580#define GLOBAL_ASM_OP "\t.global " 581 582/* This is how to output a reference to a user-level label named NAME. 583 `assemble_name' uses this. */ 584 585#undef ASM_OUTPUT_LABELREF 586#define ASM_OUTPUT_LABELREF(FILE, NAME) \ 587 asm_fprintf (FILE, "%U%s", (*targetm.strip_name_encoding) (NAME)) 588 589/* This is how we tell the assembler that two symbols have the same value. */ 590 591#define ASM_OUTPUT_DEF(FILE,NAME1,NAME2) \ 592 do \ 593 { \ 594 assemble_name (FILE, NAME1); \ 595 fputs (" = ", FILE); \ 596 assemble_name (FILE, NAME2); \ 597 fputc ('\n', FILE); \ 598 } \ 599 while (0) 600 601/* How to refer to registers in assembler output. 602 This sequence is indexed by compiler's hard-register-number (see above). */ 603 604#define REGISTER_NAMES \ 605{ "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3", "ap", "sp", \ 606 "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7" \ 607, "fs0", "fs1", "fs2", "fs3", "fs4", "fs5", "fs6", "fs7" \ 608, "fs8", "fs9", "fs10", "fs11", "fs12", "fs13", "fs14", "fs15" \ 609, "fs16", "fs17", "fs18", "fs19", "fs20", "fs21", "fs22", "fs23" \ 610, "fs24", "fs25", "fs26", "fs27", "fs28", "fs29", "fs30", "fs31" \ 611, "mdr", "EPSW" \ 612} 613 614#define ADDITIONAL_REGISTER_NAMES \ 615{ {"r8", 4}, {"r9", 5}, {"r10", 6}, {"r11", 7}, \ 616 {"r12", 0}, {"r13", 1}, {"r14", 2}, {"r15", 3}, \ 617 {"e0", 10}, {"e1", 11}, {"e2", 12}, {"e3", 13}, \ 618 {"e4", 14}, {"e5", 15}, {"e6", 16}, {"e7", 17} \ 619, {"fd0", 18}, {"fd2", 20}, {"fd4", 22}, {"fd6", 24} \ 620, {"fd8", 26}, {"fd10", 28}, {"fd12", 30}, {"fd14", 32} \ 621, {"fd16", 34}, {"fd18", 36}, {"fd20", 38}, {"fd22", 40} \ 622, {"fd24", 42}, {"fd26", 44}, {"fd28", 46}, {"fd30", 48} \ 623, {"cc", CC_REG} \ 624} 625 626/* Print an instruction operand X on file FILE. 627 look in mn10300.c for details */ 628 629#define PRINT_OPERAND(FILE, X, CODE) \ 630 mn10300_print_operand (FILE, X, CODE) 631 632/* Print a memory operand whose address is X, on file FILE. 633 This uses a function in output-vax.c. */ 634 635#define PRINT_OPERAND_ADDRESS(FILE, ADDR) \ 636 mn10300_print_operand_address (FILE, ADDR) 637 638/* This is how to output an element of a case-vector that is absolute. */ 639 640#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ 641 fprintf (FILE, "\t%s .L%d\n", ".long", VALUE) 642 643/* This is how to output an element of a case-vector that is relative. */ 644 645#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \ 646 fprintf (FILE, "\t%s .L%d-.L%d\n", ".long", VALUE, REL) 647 648#define ASM_OUTPUT_ALIGN(FILE,LOG) \ 649 if ((LOG) != 0) \ 650 fprintf (FILE, "\t.align %d\n", (LOG)) 651 652/* We don't have to worry about dbx compatibility for the mn10300. */ 653#define DEFAULT_GDB_EXTENSIONS 1 654 655/* Use dwarf2 debugging info by default. */ 656#undef PREFERRED_DEBUGGING_TYPE 657#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG 658#define DWARF2_DEBUGGING_INFO 1 659#define DWARF2_ASM_LINE_DEBUG_INFO 1 660 661/* Specify the machine mode that this machine uses 662 for the index in the tablejump instruction. */ 663#define CASE_VECTOR_MODE Pmode 664 665/* Define if operations between registers always perform the operation 666 on the full register even if a narrower mode is specified. */ 667#define WORD_REGISTER_OPERATIONS 1 668 669#define LOAD_EXTEND_OP(MODE) ZERO_EXTEND 670 671/* Max number of bytes we can move from memory to memory 672 in one reasonably fast instruction. */ 673#define MOVE_MAX 4 674 675/* Define if shifts truncate the shift count 676 which implies one can omit a sign-extension or zero-extension 677 of a shift count. */ 678#define SHIFT_COUNT_TRUNCATED 1 679 680/* Specify the machine mode that pointers have. 681 After generation of rtl, the compiler makes no further distinction 682 between pointers and any other objects of this machine mode. */ 683#define Pmode SImode 684 685/* A function address in a call instruction 686 is a byte address (for indexing purposes) 687 so give the MEM rtx a byte's mode. */ 688#define FUNCTION_MODE QImode 689 690/* The assembler op to get a word. */ 691 692#define FILE_ASM_OP "\t.file\n" 693 694