1# $NetBSD: envsys.conf,v 1.13 2017/10/21 19:43:53 jmcneill Exp $
2#
3# ----------------------------------------------------------------------
4# Configuration file for envstat(8) and the envsys(4) framework.
5# ----------------------------------------------------------------------
6#
7# Devices are specified in the first block, sensors in the second block,
8# and properties inside of the sensor block:
9#
10# 	foo0 {
11# 		prop0 = value;
12#		sensor0 { ... }
13#	}
14#
15# Properties must be separated by a semicolon character and assigned by
16# using the equal character:
17#
18# 		critical-capacity = 10;
19#
20# Please see the envsys.conf(5) manual page for a detailed explanation.
21#
22# ----------------------------------------------------------------------
23#       CONFIGURATION PROPERTIES FOR SPECIFIC DRIVERS AND MOTHERBOARDS
24# ----------------------------------------------------------------------
25#
26# The following configuration blocks will report the correct
27# values for the specified motherboard and driver. If you have
28# a different motherboard and verified the values are not correct
29# please file a bug report.
30#
31# ------------------------------
32# ASUS M2N-E (IT8712F Super I/O)
33# ------------------------------
34#
35# itesio0 {
36# 	# Fixup rfact for the VCORE_A sensor.
37# 	sensor3 { rfact = 1800000; }
38#
39# 	# Fixup rfact and change description (VCORE_B = +3.3V).
40# 	sensor4 { description = "+3.3 Voltage"; rfact = 2000000; }
41#
42# 	# Change description (+3.3V, unused sensor).
43# 	sensor5 { description = "Unused"; }
44#
45# 	# Fixup rfact and change description for the +5V sensor.
46# 	sensor6 { description = "+5 Voltage"; rfact = 3490000; }
47#
48# 	# Fixup rfact and change description for the +12V sensor.
49# 	sensor7 { description = "+12 Voltage"; rfact = 8500000; }
50# }
51#
52# --------------------------------------
53# Gigabyte P35C-DS3R (IT8718F Super I/O)
54# --------------------------------------
55#
56# itesio0 {
57# 	# Fixup rfact and change description for the VCore sensor.
58# 	sensor3 { description = "VCore Voltage"; rfact = 1000000; }
59#
60# 	# Change description (VCORE_B is DDR).
61#	sensor4 { description = "DDR Voltage"; }
62#	
63#	# Fixup rfact and change description for the +12V sensor.
64#	sensor7 { description = "+12 Voltage"; rfact = 116000000; }
65#
66#	# Fixup rfact for the -12V sensor.
67#	sensor9 { rfact = 9000000; }
68# }
69