buf_subs.c revision 1.16
1/* $NetBSD: buf_subs.c,v 1.16 2001/10/25 05:33:32 lukem Exp $ */ 2 3/*- 4 * Copyright (c) 1992 Keith Muller. 5 * Copyright (c) 1992, 1993 6 * The Regents of the University of California. All rights reserved. 7 * 8 * This code is derived from software contributed to Berkeley by 9 * Keith Muller of the University of California, San Diego. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the University of 22 * California, Berkeley and its contributors. 23 * 4. Neither the name of the University nor the names of its contributors 24 * may be used to endorse or promote products derived from this software 25 * without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 28 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 29 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 30 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 31 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 35 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 36 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 37 * SUCH DAMAGE. 38 */ 39 40#include <sys/cdefs.h> 41#ifndef lint 42#if 0 43static char sccsid[] = "@(#)buf_subs.c 8.2 (Berkeley) 4/18/94"; 44#else 45__RCSID("$NetBSD: buf_subs.c,v 1.16 2001/10/25 05:33:32 lukem Exp $"); 46#endif 47#endif /* not lint */ 48 49#include <sys/types.h> 50#include <sys/time.h> 51#include <sys/stat.h> 52#include <sys/param.h> 53#include <stdio.h> 54#include <ctype.h> 55#include <errno.h> 56#include <unistd.h> 57#include <stdlib.h> 58#include <string.h> 59#include "pax.h" 60#include "extern.h" 61 62/* 63 * routines which implement archive and file buffering 64 */ 65 66#define MINFBSZ 512 /* default block size for hole detect */ 67#define MAXFLT 10 /* default media read error limit */ 68 69/* 70 * Need to change bufmem to dynamic allocation when the upper 71 * limit on blocking size is removed (though that will violate pax spec) 72 * MAXBLK define and tests will also need to be updated. 73 */ 74static char bufmem[MAXBLK+BLKMULT]; /* i/o buffer + pushback id space */ 75static char *buf; /* normal start of i/o buffer */ 76static char *bufend; /* end or last char in i/o buffer */ 77static char *bufpt; /* read/write point in i/o buffer */ 78int blksz = MAXBLK; /* block input/output size in bytes */ 79int wrblksz; /* user spec output size in bytes */ 80int maxflt = MAXFLT; /* MAX consecutive media errors */ 81int rdblksz; /* first read blksize (tapes only) */ 82off_t wrlimit; /* # of bytes written per archive vol */ 83off_t wrcnt; /* # of bytes written on current vol */ 84off_t rdcnt; /* # of bytes read on current vol */ 85 86/* 87 * wr_start() 88 * set up the buffering system to operate in a write mode 89 * Return: 90 * 0 if ok, -1 if the user specified write block size violates pax spec 91 */ 92 93int 94wr_start(void) 95{ 96 buf = &(bufmem[BLKMULT]); 97 /* 98 * Check to make sure the write block size meets pax specs. If the user 99 * does not specify a blocksize, we use the format default blocksize. 100 * We must be picky on writes, so we do not allow the user to create an 101 * archive that might be hard to read elsewhere. If all ok, we then 102 * open the first archive volume 103 */ 104 if (!wrblksz) 105 wrblksz = frmt->bsz; 106 if (wrblksz > MAXBLK) { 107 tty_warn(1, "Write block size of %d too large, maximum is: %d", 108 wrblksz, MAXBLK); 109 return(-1); 110 } 111 if (wrblksz % BLKMULT) { 112 tty_warn(1, "Write block size of %d is not a %d byte multiple", 113 wrblksz, BLKMULT); 114 return(-1); 115 } 116 117 /* 118 * we only allow wrblksz to be used with all archive operations 119 */ 120 blksz = rdblksz = wrblksz; 121 if ((ar_open(arcname) < 0) && (ar_next() < 0)) 122 return(-1); 123 wrcnt = 0; 124 bufend = buf + wrblksz; 125 bufpt = buf; 126 return(0); 127} 128 129/* 130 * rd_start() 131 * set up buffering system to read an archive 132 * Return: 133 * 0 if ok, -1 otherwise 134 */ 135 136int 137rd_start(void) 138{ 139 /* 140 * leave space for the header pushback (see get_arc()). If we are 141 * going to append and user specified a write block size, check it 142 * right away 143 */ 144 buf = &(bufmem[BLKMULT]); 145 if ((act == APPND) && wrblksz) { 146 if (wrblksz > MAXBLK) { 147 tty_warn(1, 148 "Write block size %d too large, maximum is: %d", 149 wrblksz, MAXBLK); 150 return(-1); 151 } 152 if (wrblksz % BLKMULT) { 153 tty_warn(1, 154 "Write block size %d is not a %d byte multiple", 155 wrblksz, BLKMULT); 156 return(-1); 157 } 158 } 159 160 /* 161 * open the archive 162 */ 163 if ((ar_open(arcname) < 0) && (ar_next() < 0)) 164 return(-1); 165 bufend = buf + rdblksz; 166 bufpt = bufend; 167 rdcnt = 0; 168 return(0); 169} 170 171/* 172 * cp_start() 173 * set up buffer system for copying within the file system 174 */ 175 176void 177cp_start(void) 178{ 179 buf = &(bufmem[BLKMULT]); 180 rdblksz = blksz = MAXBLK; 181} 182 183/* 184 * appnd_start() 185 * Set up the buffering system to append new members to an archive that 186 * was just read. The last block(s) of an archive may contain a format 187 * specific trailer. To append a new member, this trailer has to be 188 * removed from the archive. The first byte of the trailer is replaced by 189 * the start of the header of the first file added to the archive. The 190 * format specific end read function tells us how many bytes to move 191 * backwards in the archive to be positioned BEFORE the trailer. Two 192 * different positions have to be adjusted, the O.S. file offset (e.g. the 193 * position of the tape head) and the write point within the data we have 194 * stored in the read (soon to become write) buffer. We may have to move 195 * back several records (the number depends on the size of the archive 196 * record and the size of the format trailer) to read up the record where 197 * the first byte of the trailer is recorded. Trailers may span (and 198 * overlap) record boundaries. 199 * We first calculate which record has the first byte of the trailer. We 200 * move the OS file offset back to the start of this record and read it 201 * up. We set the buffer write pointer to be at this byte (the byte where 202 * the trailer starts). We then move the OS file pointer back to the 203 * start of this record so a flush of this buffer will replace the record 204 * in the archive. 205 * A major problem is rewriting this last record. For archives stored 206 * on disk files, this is trival. However, many devices are really picky 207 * about the conditions under which they will allow a write to occur. 208 * Often devices restrict the conditions where writes can be made writes, 209 * so it may not be feasable to append archives stored on all types of 210 * devices. 211 * Return: 212 * 0 for success, -1 for failure 213 */ 214 215int 216appnd_start(off_t skcnt) 217{ 218 int res; 219 off_t cnt; 220 221 if (exit_val != 0) { 222 tty_warn(0, "Cannot append to an archive that may have flaws."); 223 return(-1); 224 } 225 /* 226 * if the user did not specify a write blocksize, inherit the size used 227 * in the last archive volume read. (If a is set we still use rdblksz 228 * until next volume, cannot shift sizes within a single volume). 229 */ 230 if (!wrblksz) 231 wrblksz = blksz = rdblksz; 232 else 233 blksz = rdblksz; 234 235 /* 236 * make sure that this volume allows appends 237 */ 238 if (ar_app_ok() < 0) 239 return(-1); 240 241 /* 242 * Calculate bytes to move back and move in front of record where we 243 * need to start writing from. Remember we have to add in any padding 244 * that might be in the buffer after the trailer in the last block. We 245 * travel skcnt + padding ROUNDED UP to blksize. 246 */ 247 skcnt += bufend - bufpt; 248 if ((cnt = (skcnt/blksz) * blksz) < skcnt) 249 cnt += blksz; 250 if (ar_rev((off_t)cnt) < 0) 251 goto out; 252 253 /* 254 * We may have gone too far if there is valid data in the block we are 255 * now in front of, read up the block and position the pointer after 256 * the valid data. 257 */ 258 if ((cnt -= skcnt) > 0) { 259 /* 260 * watch out for stupid tape drives. ar_rev() will set rdblksz 261 * to be real physical blocksize so we must loop until we get 262 * the old rdblksz (now in blksz). If ar_rev() fouls up the 263 * determination of the physical block size, we will fail. 264 */ 265 bufpt = buf; 266 bufend = buf + blksz; 267 while (bufpt < bufend) { 268 if ((res = ar_read(bufpt, rdblksz)) <= 0) 269 goto out; 270 bufpt += res; 271 } 272 if (ar_rev((off_t)(bufpt - buf)) < 0) 273 goto out; 274 bufpt = buf + cnt; 275 bufend = buf + blksz; 276 } else { 277 /* 278 * buffer is empty 279 */ 280 bufend = buf + blksz; 281 bufpt = buf; 282 } 283 rdblksz = blksz; 284 rdcnt -= skcnt; 285 wrcnt = 0; 286 287 /* 288 * At this point we are ready to write. If the device requires special 289 * handling to write at a point were previously recorded data resides, 290 * that is handled in ar_set_wr(). From now on we operate under normal 291 * ARCHIVE mode (write) conditions 292 */ 293 if (ar_set_wr() < 0) 294 return(-1); 295 act = ARCHIVE; 296 return(0); 297 298 out: 299 tty_warn(1, "Unable to rewrite archive trailer, cannot append."); 300 return(-1); 301} 302 303/* 304 * rd_sync() 305 * A read error occurred on this archive volume. Resync the buffer and 306 * try to reset the device (if possible) so we can continue to read. Keep 307 * trying to do this until we get a valid read, or we reach the limit on 308 * consecutive read faults (at which point we give up). The user can 309 * adjust the read error limit through a command line option. 310 * Returns: 311 * 0 on success, and -1 on failure 312 */ 313 314int 315rd_sync(void) 316{ 317 int errcnt = 0; 318 int res; 319 320 /* 321 * if the user says bail out on first fault, we are out of here... 322 */ 323 if (maxflt == 0) 324 return(-1); 325 if (act == APPND) { 326 tty_warn(1, 327 "Unable to append when there are archive read errors."); 328 return(-1); 329 } 330 331 /* 332 * poke at device and try to get past media error 333 */ 334 if (ar_rdsync() < 0) { 335 if (ar_next() < 0) 336 return(-1); 337 else 338 rdcnt = 0; 339 } 340 341 for (;;) { 342 if ((res = ar_read(buf, blksz)) > 0) { 343 /* 344 * All right! got some data, fill that buffer 345 */ 346 bufpt = buf; 347 bufend = buf + res; 348 rdcnt += res; 349 return(0); 350 } 351 352 /* 353 * Oh well, yet another failed read... 354 * if error limit reached, ditch. o.w. poke device to move past 355 * bad media and try again. if media is badly damaged, we ask 356 * the poor (and upset user at this point) for the next archive 357 * volume. remember the goal on reads is to get the most we 358 * can extract out of the archive. 359 */ 360 if ((maxflt > 0) && (++errcnt > maxflt)) 361 tty_warn(0, 362 "Archive read error limit (%d) reached",maxflt); 363 else if (ar_rdsync() == 0) 364 continue; 365 if (ar_next() < 0) 366 break; 367 rdcnt = 0; 368 errcnt = 0; 369 } 370 return(-1); 371} 372 373/* 374 * pback() 375 * push the data used during the archive id phase back into the I/O 376 * buffer. This is required as we cannot be sure that the header does NOT 377 * overlap a block boundary (as in the case we are trying to recover a 378 * flawed archived). This was not designed to be used for any other 379 * purpose. (What software engineering, HA!) 380 * WARNING: do not even THINK of pback greater than BLKMULT, unless the 381 * pback space is increased. 382 */ 383 384void 385pback(char *pt, int cnt) 386{ 387 bufpt -= cnt; 388 memcpy(bufpt, pt, cnt); 389 return; 390} 391 392/* 393 * rd_skip() 394 * skip forward in the archive during a archive read. Used to get quickly 395 * past file data and padding for files the user did NOT select. 396 * Return: 397 * 0 if ok, -1 failure, and 1 when EOF on the archive volume was detected. 398 */ 399 400int 401rd_skip(off_t skcnt) 402{ 403 off_t res; 404 off_t cnt; 405 off_t skipped = 0; 406 407 /* 408 * consume what data we have in the buffer. If we have to move forward 409 * whole records, we call the low level skip function to see if we can 410 * move within the archive without doing the expensive reads on data we 411 * do not want. 412 */ 413 if (skcnt == 0) 414 return(0); 415 res = MIN((bufend - bufpt), skcnt); 416 bufpt += res; 417 skcnt -= res; 418 419 /* 420 * if skcnt is now 0, then no additional i/o is needed 421 */ 422 if (skcnt == 0) 423 return(0); 424 425 /* 426 * We have to read more, calculate complete and partial record reads 427 * based on rdblksz. we skip over "cnt" complete records 428 */ 429 res = skcnt%rdblksz; 430 cnt = (skcnt/rdblksz) * rdblksz; 431 432 /* 433 * if the skip fails, we will have to resync. ar_fow will tell us 434 * how much it can skip over. We will have to read the rest. 435 */ 436 if (ar_fow(cnt, &skipped) < 0) 437 return(-1); 438 res += cnt - skipped; 439 rdcnt += skipped; 440 441 /* 442 * what is left we have to read (which may be the whole thing if 443 * ar_fow() told us the device can only read to skip records); 444 */ 445 while (res > 0L) { 446 cnt = bufend - bufpt; 447 /* 448 * if the read fails, we will have to resync 449 */ 450 if ((cnt <= 0) && ((cnt = buf_fill()) < 0)) 451 return(-1); 452 if (cnt == 0) 453 return(1); 454 cnt = MIN(cnt, res); 455 bufpt += cnt; 456 res -= cnt; 457 } 458 return(0); 459} 460 461/* 462 * wr_fin() 463 * flush out any data (and pad if required) the last block. We always pad 464 * with zero (even though we do not have to). Padding with 0 makes it a 465 * lot easier to recover if the archive is damaged. zero paddding SHOULD 466 * BE a requirement.... 467 */ 468 469void 470wr_fin(void) 471{ 472 if (bufpt > buf) { 473 memset(bufpt, 0, bufend - bufpt); 474 bufpt = bufend; 475 (void)buf_flush(blksz); 476 } 477} 478 479/* 480 * wr_rdbuf() 481 * fill the write buffer from data passed to it in a buffer (usually used 482 * by format specific write routines to pass a file header). On failure we 483 * punt. We do not allow the user to continue to write flawed archives. 484 * We assume these headers are not very large (the memory copy we use is 485 * a bit expensive). 486 * Return: 487 * 0 if buffer was filled ok, -1 o.w. (buffer flush failure) 488 */ 489 490int 491wr_rdbuf(char *out, int outcnt) 492{ 493 int cnt; 494 495 /* 496 * while there is data to copy copy into the write buffer. when the 497 * write buffer fills, flush it to the archive and continue 498 */ 499 while (outcnt > 0) { 500 cnt = bufend - bufpt; 501 if ((cnt <= 0) && ((cnt = buf_flush(blksz)) < 0)) 502 return(-1); 503 /* 504 * only move what we have space for 505 */ 506 cnt = MIN(cnt, outcnt); 507 memcpy(bufpt, out, cnt); 508 bufpt += cnt; 509 out += cnt; 510 outcnt -= cnt; 511 } 512 return(0); 513} 514 515/* 516 * rd_wrbuf() 517 * copy from the read buffer into a supplied buffer a specified number of 518 * bytes. If the read buffer is empty fill it and continue to copy. 519 * usually used to obtain a file header for processing by a format 520 * specific read routine. 521 * Return 522 * number of bytes copied to the buffer, 0 indicates EOF on archive volume, 523 * -1 is a read error 524 */ 525 526int 527rd_wrbuf(char *in, int cpcnt) 528{ 529 int res; 530 int cnt; 531 int incnt = cpcnt; 532 533 /* 534 * loop until we fill the buffer with the requested number of bytes 535 */ 536 while (incnt > 0) { 537 cnt = bufend - bufpt; 538 if ((cnt <= 0) && ((cnt = buf_fill()) <= 0)) { 539 /* 540 * read error, return what we got (or the error if 541 * no data was copied). The caller must know that an 542 * error occurred and has the best knowledge what to 543 * do with it 544 */ 545 if ((res = cpcnt - incnt) > 0) 546 return(res); 547 return(cnt); 548 } 549 550 /* 551 * calculate how much data to copy based on whats left and 552 * state of buffer 553 */ 554 cnt = MIN(cnt, incnt); 555 memcpy(in, bufpt, cnt); 556 bufpt += cnt; 557 incnt -= cnt; 558 in += cnt; 559 } 560 return(cpcnt); 561} 562 563/* 564 * wr_skip() 565 * skip forward during a write. In other words add padding to the file. 566 * we add zero filled padding as it makes flawed archives much easier to 567 * recover from. the caller tells us how many bytes of padding to add 568 * This routine was not designed to add HUGE amount of padding, just small 569 * amounts (a few 512 byte blocks at most) 570 * Return: 571 * 0 if ok, -1 if there was a buf_flush failure 572 */ 573 574int 575wr_skip(off_t skcnt) 576{ 577 int cnt; 578 579 /* 580 * loop while there is more padding to add 581 */ 582 while (skcnt > 0L) { 583 cnt = bufend - bufpt; 584 if ((cnt <= 0) && ((cnt = buf_flush(blksz)) < 0)) 585 return(-1); 586 cnt = MIN(cnt, skcnt); 587 memset(bufpt, 0, cnt); 588 bufpt += cnt; 589 skcnt -= cnt; 590 } 591 return(0); 592} 593 594/* 595 * wr_rdfile() 596 * fill write buffer with the contents of a file. We are passed an open 597 * file descriptor to the file an the archive structure that describes the 598 * file we are storing. The variable "left" is modified to contain the 599 * number of bytes of the file we were NOT able to write to the archive. 600 * it is important that we always write EXACTLY the number of bytes that 601 * the format specific write routine told us to. The file can also get 602 * bigger, so reading to the end of file would create an improper archive, 603 * we just detect this case and warn the user. We never create a bad 604 * archive if we can avoid it. Of course trying to archive files that are 605 * active is asking for trouble. It we fail, we pass back how much we 606 * could NOT copy and let the caller deal with it. 607 * Return: 608 * 0 ok, -1 if archive write failure. a short read of the file returns a 609 * 0, but "left" is set to be greater than zero. 610 */ 611 612int 613wr_rdfile(ARCHD *arcn, int ifd, off_t *left) 614{ 615 int cnt; 616 int res = 0; 617 off_t size = arcn->sb.st_size; 618 struct stat sb; 619 620 /* 621 * while there are more bytes to write 622 */ 623 while (size > 0L) { 624 cnt = bufend - bufpt; 625 if ((cnt <= 0) && ((cnt = buf_flush(blksz)) < 0)) { 626 *left = size; 627 return(-1); 628 } 629 cnt = MIN(cnt, size); 630 if ((res = read_with_restart(ifd, bufpt, cnt)) <= 0) 631 break; 632 size -= res; 633 bufpt += res; 634 } 635 636 /* 637 * better check the file did not change during this operation 638 * or the file read failed. 639 */ 640 if (res < 0) 641 syswarn(1, errno, "Read fault on %s", arcn->org_name); 642 else if (size != 0L) 643 tty_warn(1, "File changed size during read %s", arcn->org_name); 644 else if (fstat(ifd, &sb) < 0) 645 syswarn(1, errno, "Failed stat on %s", arcn->org_name); 646 else if (arcn->sb.st_mtime != sb.st_mtime) 647 tty_warn(1, "File %s was modified during copy to archive", 648 arcn->org_name); 649 *left = size; 650 return(0); 651} 652 653/* 654 * rd_wrfile() 655 * extract the contents of a file from the archive. If we are unable to 656 * extract the entire file (due to failure to write the file) we return 657 * the numbers of bytes we did NOT process. This way the caller knows how 658 * many bytes to skip past to find the next archive header. If the failure 659 * was due to an archive read, we will catch that when we try to skip. If 660 * the format supplies a file data crc value, we calculate the actual crc 661 * so that it can be compared to the value stored in the header 662 * NOTE: 663 * We call a special function to write the file. This function attempts to 664 * restore file holes (blocks of zeros) into the file. When files are 665 * sparse this saves space, and is a LOT faster. For non sparse files 666 * the performance hit is small. As of this writing, no archive supports 667 * information on where the file holes are. 668 * Return: 669 * 0 ok, -1 if archive read failure. if we cannot write the entire file, 670 * we return a 0 but "left" is set to be the amount unwritten 671 */ 672 673int 674rd_wrfile(ARCHD *arcn, int ofd, off_t *left) 675{ 676 int cnt = 0; 677 off_t size = arcn->sb.st_size; 678 int res = 0; 679 char *fnm = arcn->name; 680 int isem = 1; 681 int rem; 682 int sz = MINFBSZ; 683 struct stat sb; 684 u_long crc = 0L; 685 686 /* 687 * pass the blocksize of the file being written to the write routine, 688 * if the size is zero, use the default MINFBSZ 689 */ 690 if (ofd == -1) 691 sz = PAXPATHLEN+1; 692 else if (fstat(ofd, &sb) == 0) { 693 if (sb.st_blksize > 0) 694 sz = (int)sb.st_blksize; 695 } else 696 syswarn(0,errno,"Unable to obtain block size for file %s",fnm); 697 rem = sz; 698 *left = 0L; 699 700 /* 701 * Copy the archive to the file the number of bytes specified. We have 702 * to assume that we want to recover file holes as none of the archive 703 * formats can record the location of file holes. 704 */ 705 while (size > 0L) { 706 cnt = bufend - bufpt; 707 /* 708 * if we get a read error, we do not want to skip, as we may 709 * miss a header, so we do not set left, but if we get a write 710 * error, we do want to skip over the unprocessed data. 711 */ 712 if ((cnt <= 0) && ((cnt = buf_fill()) <= 0)) 713 break; 714 cnt = MIN(cnt, size); 715 if ((res = file_write(ofd,bufpt,cnt,&rem,&isem,sz,fnm)) <= 0) { 716 *left = size; 717 break; 718 } 719 720 if (docrc) { 721 /* 722 * update the actual crc value 723 */ 724 cnt = res; 725 while (--cnt >= 0) 726 crc += *bufpt++ & 0xff; 727 } else 728 bufpt += res; 729 size -= res; 730 } 731 732 /* 733 * if the last block has a file hole (all zero), we must make sure this 734 * gets updated in the file. We force the last block of zeros to be 735 * written. just closing with the file offset moved forward may not put 736 * a hole at the end of the file. 737 */ 738 if (ofd != -1 && isem && (arcn->sb.st_size > 0L)) 739 file_flush(ofd, fnm, isem); 740 741 /* 742 * if we failed from archive read, we do not want to skip 743 */ 744 if ((size > 0L) && (*left == 0L)) 745 return(-1); 746 747 /* 748 * some formats record a crc on file data. If so, then we compare the 749 * calculated crc to the crc stored in the archive 750 */ 751 if (docrc && (size == 0L) && (arcn->crc != crc)) 752 tty_warn(1,"Actual crc does not match expected crc %s", 753 arcn->name); 754 return(0); 755} 756 757/* 758 * cp_file() 759 * copy the contents of one file to another. used during -rw phase of pax 760 * just as in rd_wrfile() we use a special write function to write the 761 * destination file so we can properly copy files with holes. 762 */ 763 764void 765cp_file(ARCHD *arcn, int fd1, int fd2) 766{ 767 int cnt; 768 off_t cpcnt = 0L; 769 int res = 0; 770 char *fnm = arcn->name; 771 int no_hole = 0; 772 int isem = 1; 773 int rem; 774 int sz = MINFBSZ; 775 struct stat sb; 776 777 /* 778 * check for holes in the source file. If none, we will use regular 779 * write instead of file write. 780 */ 781 if (((off_t)(arcn->sb.st_blocks * BLKMULT)) >= arcn->sb.st_size) 782 ++no_hole; 783 784 /* 785 * pass the blocksize of the file being written to the write routine, 786 * if the size is zero, use the default MINFBSZ 787 */ 788 if (fstat(fd2, &sb) == 0) { 789 if (sb.st_blksize > 0) 790 sz = sb.st_blksize; 791 } else 792 syswarn(0,errno,"Unable to obtain block size for file %s",fnm); 793 rem = sz; 794 795 /* 796 * read the source file and copy to destination file until EOF 797 */ 798 for(;;) { 799 if ((cnt = read_with_restart(fd1, buf, blksz)) <= 0) 800 break; 801 if (no_hole) 802 res = xwrite(fd2, buf, cnt); 803 else 804 res = file_write(fd2, buf, cnt, &rem, &isem, sz, fnm); 805 if (res != cnt) 806 break; 807 cpcnt += cnt; 808 } 809 810 /* 811 * check to make sure the copy is valid. 812 */ 813 if (res < 0) 814 syswarn(1, errno, "Failed write during copy of %s to %s", 815 arcn->org_name, arcn->name); 816 else if (cpcnt != arcn->sb.st_size) 817 tty_warn(1, "File %s changed size during copy to %s", 818 arcn->org_name, arcn->name); 819 else if (fstat(fd1, &sb) < 0) 820 syswarn(1, errno, "Failed stat of %s", arcn->org_name); 821 else if (arcn->sb.st_mtime != sb.st_mtime) 822 tty_warn(1, "File %s was modified during copy to %s", 823 arcn->org_name, arcn->name); 824 825 /* 826 * if the last block has a file hole (all zero), we must make sure this 827 * gets updated in the file. We force the last block of zeros to be 828 * written. just closing with the file offset moved forward may not put 829 * a hole at the end of the file. 830 */ 831 if (!no_hole && isem && (arcn->sb.st_size > 0L)) 832 file_flush(fd2, fnm, isem); 833 return; 834} 835 836/* 837 * buf_fill() 838 * fill the read buffer with the next record (or what we can get) from 839 * the archive volume. 840 * Return: 841 * Number of bytes of data in the read buffer, -1 for read error, and 842 * 0 when finished (user specified termination in ar_next()). 843 */ 844 845int 846buf_fill(void) 847{ 848 int cnt; 849 static int fini = 0; 850 851 if (fini) 852 return(0); 853 854 for(;;) { 855 /* 856 * try to fill the buffer. on error the next archive volume is 857 * opened and we try again. 858 */ 859 if ((cnt = ar_read(buf, blksz)) > 0) { 860 bufpt = buf; 861 bufend = buf + cnt; 862 rdcnt += cnt; 863 return(cnt); 864 } 865 866 /* 867 * errors require resync, EOF goes to next archive 868 */ 869 if (cnt < 0) 870 break; 871 if (ar_next() < 0) { 872 fini = 1; 873 return(0); 874 } 875 rdcnt = 0; 876 } 877 exit_val = 1; 878 return(-1); 879} 880 881/* 882 * buf_flush() 883 * force the write buffer to the archive. We are passed the number of 884 * bytes in the buffer at the point of the flush. When we change archives 885 * the record size might change. (either larger or smaller). 886 * Return: 887 * 0 if all is ok, -1 when a write error occurs. 888 */ 889 890int 891buf_flush(int bufcnt) 892{ 893 int cnt; 894 int push = 0; 895 int totcnt = 0; 896 897 /* 898 * if we have reached the user specified byte count for each archive 899 * volume, prompt for the next volume. (The non-standard -R flag). 900 * NOTE: If the wrlimit is smaller than wrcnt, we will always write 901 * at least one record. We always round limit UP to next blocksize. 902 */ 903 if ((wrlimit > 0) && (wrcnt > wrlimit)) { 904 tty_warn(0, 905 "User specified archive volume byte limit reached."); 906 if (ar_next() < 0) { 907 wrcnt = 0; 908 exit_val = 1; 909 return(-1); 910 } 911 wrcnt = 0; 912 913 /* 914 * The new archive volume might have changed the size of the 915 * write blocksize. if so we figure out if we need to write 916 * (one or more times), or if there is now free space left in 917 * the buffer (it is no longer full). bufcnt has the number of 918 * bytes in the buffer, (the blocksize, at the point we were 919 * CALLED). Push has the amount of "extra" data in the buffer 920 * if the block size has shrunk from a volume change. 921 */ 922 bufend = buf + blksz; 923 if (blksz > bufcnt) 924 return(0); 925 if (blksz < bufcnt) 926 push = bufcnt - blksz; 927 } 928 929 /* 930 * We have enough data to write at least one archive block 931 */ 932 for (;;) { 933 /* 934 * write a block and check if it all went out ok 935 */ 936 cnt = ar_write(buf, blksz); 937 if (cnt == blksz) { 938 /* 939 * the write went ok 940 */ 941 wrcnt += cnt; 942 totcnt += cnt; 943 if (push > 0) { 944 /* we have extra data to push to the front. 945 * check for more than 1 block of push, and if 946 * so we loop back to write again 947 */ 948 memcpy(buf, bufend, push); 949 bufpt = buf + push; 950 if (push >= blksz) { 951 push -= blksz; 952 continue; 953 } 954 } else 955 bufpt = buf; 956 return(totcnt); 957 } else if (cnt > 0) { 958 /* 959 * Oh drat we got a partial write! 960 * if format doesnt care about alignment let it go, 961 * we warned the user in ar_write().... but this means 962 * the last record on this volume violates pax spec.... 963 */ 964 totcnt += cnt; 965 wrcnt += cnt; 966 bufpt = buf + cnt; 967 cnt = bufcnt - cnt; 968 memcpy(buf, bufpt, cnt); 969 bufpt = buf + cnt; 970 if (!frmt->blkalgn || ((cnt % frmt->blkalgn) == 0)) 971 return(totcnt); 972 break; 973 } 974 975 /* 976 * All done, go to next archive 977 */ 978 wrcnt = 0; 979 if (ar_next() < 0) 980 break; 981 982 /* 983 * The new archive volume might also have changed the block 984 * size. if so, figure out if we have too much or too little 985 * data for using the new block size 986 */ 987 bufend = buf + blksz; 988 if (blksz > bufcnt) 989 return(0); 990 if (blksz < bufcnt) 991 push = bufcnt - blksz; 992 } 993 994 /* 995 * write failed, stop pax. we must not create a bad archive! 996 */ 997 exit_val = 1; 998 return(-1); 999} 1000