1/* $NetBSD: txcom.c,v 1.44 2010/07/20 15:03:53 tsutsui Exp $ */ 2 3/*- 4 * Copyright (c) 1999, 2000, 2004 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by UCHIYAMA Yasushi. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32#include <sys/cdefs.h> 33__KERNEL_RCSID(0, "$NetBSD: txcom.c,v 1.44 2010/07/20 15:03:53 tsutsui Exp $"); 34 35#include "opt_tx39uart_debug.h" 36 37#include <sys/param.h> 38#include <sys/systm.h> 39#include <sys/kernel.h> 40#include <sys/device.h> 41#include <sys/malloc.h> 42#include <sys/kauth.h> 43 44#include <sys/proc.h> /* tsleep/wakeup */ 45 46#include <sys/ioctl.h> 47#include <sys/select.h> 48#include <sys/file.h> 49 50#include <sys/tty.h> 51#include <sys/conf.h> 52#include <dev/cons.h> /* consdev */ 53 54#include <machine/bus.h> 55#include <machine/config_hook.h> 56 57#include <hpcmips/tx/tx39var.h> 58#include <hpcmips/tx/tx39icureg.h> 59#include <hpcmips/tx/tx39uartvar.h> 60#include <hpcmips/tx/tx39uartreg.h> 61 62#include <hpcmips/tx/tx39irvar.h> 63 64#include <hpcmips/tx/tx39clockreg.h> /* XXX */ 65 66/* 67 * UARTA channel has DTR, DSR, RTS, CTS lines. and they wired to MFIO/IO port. 68 */ 69#define IS_COM0(s) ((s) == 0) 70#define IS_COM1(s) ((s) == 1) 71#define ON ((void *)1) 72#define OFF ((void *)0) 73 74#ifdef TX39UART_DEBUG 75#define DPRINTF_ENABLE 76#define DPRINTF_DEBUG tx39uart_debug 77#endif 78#include <machine/debug.h> 79 80#define TXCOM_HW_CONSOLE 0x40 81#define TXCOM_RING_SIZE 256 /* must be a power of two! */ 82#define TXCOM_RING_MASK (TXCOM_RING_SIZE - 1) 83 84struct txcom_chip { 85 tx_chipset_tag_t sc_tc; 86 int sc_slot; /* UARTA or UARTB */ 87 int sc_cflag; 88 int sc_speed; 89 int sc_swflags; 90 int sc_hwflags; 91 92 int sc_dcd; 93 int sc_msr_cts; 94 int sc_tx_stopped; 95}; 96 97struct txcom_softc { 98 struct device sc_dev; 99 struct tty *sc_tty; 100 struct txcom_chip *sc_chip; 101 102 void *sc_txsoft_cookie; 103 void *sc_rxsoft_cookie; 104 105 u_int8_t *sc_tba; /* transmit buffer address */ 106 int sc_tbc; /* transmit byte count */ 107 int sc_heldtbc; 108 u_int8_t *sc_rbuf; /* receive buffer address */ 109 int sc_rbput; /* receive byte count */ 110 int sc_rbget; 111}; 112 113extern struct cfdriver txcom_cd; 114 115int txcom_match(struct device *, struct cfdata *, void *); 116void txcom_attach(struct device *, struct device *, void *); 117int txcom_print(void*, const char *); 118 119int txcom_txintr(void *); 120int txcom_rxintr(void *); 121int txcom_frameerr_intr(void *); 122int txcom_parityerr_intr(void *); 123int txcom_break_intr(void *); 124 125void txcom_rxsoft(void *); 126void txcom_txsoft(void *); 127 128int txcom_stsoft(void *); 129int txcom_stsoft2(void *); 130int txcom_stsoft3(void *); 131int txcom_stsoft4(void *); 132 133 134void txcom_shutdown(struct txcom_softc *); 135void txcom_break(struct txcom_softc *, int); 136void txcom_modem(struct txcom_softc *, int); 137void txcomstart(struct tty *); 138int txcomparam(struct tty *, struct termios *); 139 140void txcom_reset (struct txcom_chip *); 141int txcom_enable (struct txcom_chip *, bool); 142void txcom_disable (struct txcom_chip *); 143void txcom_setmode (struct txcom_chip *); 144void txcom_setbaudrate(struct txcom_chip *); 145int txcom_cngetc (dev_t); 146void txcom_cnputc (dev_t, int); 147void txcom_cnpollc (dev_t, int); 148 149int txcom_dcd_hook(void *, int, long, void *); 150int txcom_cts_hook(void *, int, long, void *); 151 152 153inline int __txcom_txbufready(struct txcom_chip *, int); 154const char *__txcom_slotname(int); 155 156#ifdef TX39UARTDEBUG 157void txcom_dump(struct txcom_chip *); 158#endif 159 160struct consdev txcomcons = { 161 NULL, NULL, txcom_cngetc, txcom_cnputc, txcom_cnpollc, NULL, NULL, 162 NULL, NODEV, CN_NORMAL 163}; 164 165/* Serial console */ 166struct txcom_chip txcom_chip; 167 168CFATTACH_DECL(txcom, sizeof(struct txcom_softc), 169 txcom_match, txcom_attach, NULL, NULL); 170 171dev_type_open(txcomopen); 172dev_type_close(txcomclose); 173dev_type_read(txcomread); 174dev_type_write(txcomwrite); 175dev_type_ioctl(txcomioctl); 176dev_type_stop(txcomstop); 177dev_type_tty(txcomtty); 178dev_type_poll(txcompoll); 179 180const struct cdevsw txcom_cdevsw = { 181 txcomopen, txcomclose, txcomread, txcomwrite, txcomioctl, 182 txcomstop, txcomtty, txcompoll, nommap, ttykqfilter, D_TTY 183}; 184 185int 186txcom_match(struct device *parent, struct cfdata *cf, void *aux) 187{ 188 /* if the autoconfiguration got this far, there's a slot here */ 189 return 1; 190} 191 192void 193txcom_attach(struct device *parent, struct device *self, void *aux) 194{ 195 struct tx39uart_attach_args *ua = aux; 196 struct txcom_softc *sc = (void*)self; 197 tx_chipset_tag_t tc; 198 struct tty *tp; 199 struct txcom_chip *chip; 200 int slot, console; 201 202 /* Check this slot used as serial console */ 203 console = (ua->ua_slot == txcom_chip.sc_slot) && 204 (txcom_chip.sc_hwflags & TXCOM_HW_CONSOLE); 205 206 if (console) { 207 sc->sc_chip = &txcom_chip; 208 } else { 209 if (!(sc->sc_chip = malloc(sizeof(struct txcom_chip), 210 M_DEVBUF, M_WAITOK))) { 211 printf(": can't allocate chip\n"); 212 return; 213 } 214 memset(sc->sc_chip, 0, sizeof(struct txcom_chip)); 215 } 216 217 chip = sc->sc_chip; 218 tc = chip->sc_tc = ua->ua_tc; 219 slot = chip->sc_slot = ua->ua_slot; 220 221#ifdef TX39UARTDEBUG 222 txcom_dump(chip); 223#endif 224 if (!console) 225 txcom_reset(chip); 226 227 if (!(sc->sc_rbuf = malloc(TXCOM_RING_SIZE, M_DEVBUF, M_WAITOK))) { 228 printf(": can't allocate buffer.\n"); 229 return; 230 } 231 memset(sc->sc_rbuf, 0, TXCOM_RING_SIZE); 232 233 tp = tty_alloc(); 234 tp->t_oproc = txcomstart; 235 tp->t_param = txcomparam; 236 tp->t_hwiflow = NULL; 237 sc->sc_tty = tp; 238 tty_attach(tp); 239 240 if (ISSET(chip->sc_hwflags, TXCOM_HW_CONSOLE)) { 241 int maj; 242 /* locate the major number */ 243 maj = cdevsw_lookup_major(&txcom_cdevsw); 244 245 cn_tab->cn_dev = makedev(maj, device_unit(&sc->sc_dev)); 246 247 printf(": console"); 248 } 249 250 printf("\n"); 251 252 /* 253 * Enable interrupt 254 */ 255#define TXCOMINTR(i, s) MAKEINTR(2, TX39_INTRSTATUS2_UART##i##INT(s)) 256 257 tx_intr_establish(tc, TXCOMINTR(RX, slot), IST_EDGE, IPL_TTY, 258 txcom_rxintr, sc); 259 tx_intr_establish(tc, TXCOMINTR(TX, slot), IST_EDGE, IPL_TTY, 260 txcom_txintr, sc); 261 tx_intr_establish(tc, TXCOMINTR(RXOVERRUN, slot), IST_EDGE, IPL_TTY, 262 txcom_rxintr, sc); 263 tx_intr_establish(tc, TXCOMINTR(TXOVERRUN, slot), IST_EDGE, IPL_TTY, 264 txcom_txintr, sc); 265 tx_intr_establish(tc, TXCOMINTR(FRAMEERR, slot), IST_EDGE, IPL_TTY, 266 txcom_frameerr_intr, sc); 267 tx_intr_establish(tc, TXCOMINTR(PARITYERR, slot), IST_EDGE, IPL_TTY, 268 txcom_parityerr_intr, sc); 269 tx_intr_establish(tc, TXCOMINTR(BREAK, slot), IST_EDGE, IPL_TTY, 270 txcom_break_intr, sc); 271 272 sc->sc_txsoft_cookie = 273 softint_establish(SOFTINT_SERIAL, txcom_txsoft, sc); 274 sc->sc_rxsoft_cookie = 275 softint_establish(SOFTINT_SERIAL, txcom_rxsoft, sc); 276 277 /* 278 * UARTA has external signal line. (its wiring is platform dependent) 279 */ 280 if (IS_COM0(slot)) { 281 /* install DCD, CTS hooks. */ 282 config_hook(CONFIG_HOOK_EVENT, CONFIG_HOOK_COM0_DCD, 283 CONFIG_HOOK_EXCLUSIVE, txcom_dcd_hook, sc); 284 config_hook(CONFIG_HOOK_EVENT, CONFIG_HOOK_COM0_CTS, 285 CONFIG_HOOK_EXCLUSIVE, txcom_cts_hook, sc); 286 } 287 288 /* 289 * UARTB can connect IR module 290 */ 291 if (IS_COM1(slot)) { 292 struct txcom_attach_args tca; 293 tca.tca_tc = tc; 294 tca.tca_parent = self; 295 config_found(self, &tca, txcom_print); 296 } 297} 298 299int 300txcom_print(void *aux, const char *pnp) 301{ 302 return pnp ? QUIET : UNCONF; 303} 304 305void 306txcom_reset(struct txcom_chip *chip) 307{ 308 tx_chipset_tag_t tc; 309 int slot, ofs; 310 txreg_t reg; 311 312 tc = chip->sc_tc; 313 slot = chip->sc_slot; 314 ofs = TX39_UARTCTRL1_REG(slot); 315 316 /* Supply clock */ 317 reg = tx_conf_read(tc, TX39_CLOCKCTRL_REG); 318 reg |= (slot ? TX39_CLOCK_ENUARTBCLK : TX39_CLOCK_ENUARTACLK); 319 tx_conf_write(tc, TX39_CLOCKCTRL_REG, reg); 320 321 /* reset UART module */ 322 tx_conf_write(tc, ofs, 0); 323} 324 325int 326txcom_enable(struct txcom_chip *chip, bool console) 327{ 328 tx_chipset_tag_t tc; 329 txreg_t reg; 330 int slot, ofs, timeout; 331 332 tc = chip->sc_tc; 333 slot = chip->sc_slot; 334 ofs = TX39_UARTCTRL1_REG(slot); 335 336 /* 337 * External power supply (if any) 338 * When serial console, Windows CE already powered on it. 339 */ 340 if (!console) { 341 config_hook_call(CONFIG_HOOK_POWERCONTROL, 342 CONFIG_HOOK_POWERCONTROL_COM0, PWCTL_ON); 343 delay(3); 344 } 345 346 /* Supply clock */ 347 reg = tx_conf_read(tc, TX39_CLOCKCTRL_REG); 348 reg |= (slot ? TX39_CLOCK_ENUARTBCLK : TX39_CLOCK_ENUARTACLK); 349 tx_conf_write(tc, TX39_CLOCKCTRL_REG, reg); 350 351 /* 352 * XXX Disable DMA (DMA not coded yet) 353 */ 354 reg = tx_conf_read(tc, ofs); 355 reg &= ~(TX39_UARTCTRL1_ENDMARX | TX39_UARTCTRL1_ENDMATX); 356 tx_conf_write(tc, ofs, reg); 357 358 /* enable */ 359 reg = tx_conf_read(tc, ofs); 360 reg |= TX39_UARTCTRL1_ENUART; 361 reg &= ~TX39_UARTCTRL1_ENBREAHALT; 362 tx_conf_write(tc, ofs, reg); 363 364 timeout = 100000; 365 366 while(!(tx_conf_read(tc, ofs) & TX39_UARTCTRL1_UARTON) && 367 --timeout > 0) 368 ; 369 370 if (timeout == 0 && !cold) { 371 printf("%s never power up\n", __txcom_slotname(slot)); 372 return 1; 373 } 374 375 return 0; 376} 377 378void 379txcom_disable(struct txcom_chip *chip) 380{ 381 tx_chipset_tag_t tc; 382 txreg_t reg; 383 int slot; 384 385 tc = chip->sc_tc; 386 slot = chip->sc_slot; 387 388 reg = tx_conf_read(tc, TX39_UARTCTRL1_REG(slot)); 389 /* DMA */ 390 reg &= ~(TX39_UARTCTRL1_ENDMARX | TX39_UARTCTRL1_ENDMATX); 391 392 /* disable module */ 393 reg &= ~TX39_UARTCTRL1_ENUART; 394 tx_conf_write(tc, TX39_UARTCTRL1_REG(slot), reg); 395 396 /* Clock */ 397 reg = tx_conf_read(tc, TX39_CLOCKCTRL_REG); 398 reg &= ~(slot ? TX39_CLOCK_ENUARTBCLK : TX39_CLOCK_ENUARTACLK); 399 tx_conf_write(tc, TX39_CLOCKCTRL_REG, reg); 400 401} 402 403inline int 404__txcom_txbufready(struct txcom_chip *chip, int retry) 405{ 406 tx_chipset_tag_t tc = chip->sc_tc; 407 int ofs = TX39_UARTCTRL1_REG(chip->sc_slot); 408 409 do { 410 if (tx_conf_read(tc, ofs) & TX39_UARTCTRL1_EMPTY) 411 return 1; 412 } while(--retry != 0); 413 414 return 0; 415} 416 417void 418txcom_pulse_mode(struct device *dev) 419{ 420 struct txcom_softc *sc = (void*)dev; 421 struct txcom_chip *chip = sc->sc_chip; 422 tx_chipset_tag_t tc = chip->sc_tc; 423 int ofs; 424 txreg_t reg; 425 426 ofs = TX39_UARTCTRL1_REG(chip->sc_slot); 427 428 reg = tx_conf_read(tc, ofs); 429 /* WindowsCE use this setting */ 430 reg |= TX39_UARTCTRL1_PULSEOPT1; 431 reg &= ~TX39_UARTCTRL1_PULSEOPT2; 432 reg |= TX39_UARTCTRL1_DTINVERT; 433 434 tx_conf_write(tc, ofs, reg); 435} 436 437/* 438 * console 439 */ 440int 441txcom_cngetc(dev_t dev) 442{ 443 tx_chipset_tag_t tc; 444 int ofs, c, s; 445 446 s = spltty(); 447 448 tc = txcom_chip.sc_tc; 449 ofs = TX39_UARTCTRL1_REG(txcom_chip.sc_slot); 450 451 while(!(TX39_UARTCTRL1_RXHOLDFULL & tx_conf_read(tc, ofs))) 452 ; 453 454 c = TX39_UARTRXHOLD_RXDATA( 455 tx_conf_read(tc, TX39_UARTRXHOLD_REG(txcom_chip.sc_slot))); 456 457 if (c == '\r') 458 c = '\n'; 459 460 splx(s); 461 462 return c; 463} 464 465void 466txcom_cnputc(dev_t dev, int c) 467{ 468 struct txcom_chip *chip = &txcom_chip; 469 tx_chipset_tag_t tc = chip->sc_tc; 470 int s; 471 472 s = spltty(); 473 474 /* Wait for transmitter to empty */ 475 __txcom_txbufready(chip, -1); 476 477 tx_conf_write(tc, TX39_UARTTXHOLD_REG(chip->sc_slot), 478 (c & TX39_UARTTXHOLD_TXDATA_MASK)); 479 480 __txcom_txbufready(chip, -1); 481 482 splx(s); 483} 484 485void 486txcom_cnpollc(dev_t dev, int on) 487{ 488} 489 490void 491txcom_setmode(struct txcom_chip *chip) 492{ 493 tcflag_t cflag = chip->sc_cflag; 494 int ofs = TX39_UARTCTRL1_REG(chip->sc_slot); 495 txreg_t reg; 496 497 reg = tx_conf_read(chip->sc_tc, ofs); 498 reg &= ~TX39_UARTCTRL1_ENUART; 499 tx_conf_write(chip->sc_tc, ofs, reg); 500 501 switch (ISSET(cflag, CSIZE)) { 502 default: 503 printf("txcom_setmode: CS7, CS8 only. use CS7"); 504 /* FALL THROUGH */ 505 case CS7: 506 reg |= TX39_UARTCTRL1_BIT7; 507 break; 508 case CS8: 509 reg &= ~TX39_UARTCTRL1_BIT7; 510 break; 511 } 512 513 if (ISSET(cflag, PARENB)) { 514 reg |= TX39_UARTCTRL1_ENPARITY; 515 if (ISSET(cflag, PARODD)) { 516 reg &= ~TX39_UARTCTRL1_EVENPARITY; 517 } else { 518 reg |= TX39_UARTCTRL1_EVENPARITY; 519 } 520 } else { 521 reg &= ~TX39_UARTCTRL1_ENPARITY; 522 } 523 524 if (ISSET(cflag, CSTOPB)) 525 reg |= TX39_UARTCTRL1_TWOSTOP; 526 else 527 reg &= ~TX39_UARTCTRL1_TWOSTOP; 528 529 reg |= TX39_UARTCTRL1_ENUART; 530 tx_conf_write(chip->sc_tc, ofs, reg); 531} 532 533void 534txcom_setbaudrate(struct txcom_chip *chip) 535{ 536 int baudrate; 537 int ofs = TX39_UARTCTRL1_REG(chip->sc_slot); 538 txreg_t reg, reg1; 539 540 if (chip->sc_speed == 0) 541 return; 542 543 if (!cold) 544 DPRINTF("%d\n", chip->sc_speed); 545 546 reg1 = tx_conf_read(chip->sc_tc, ofs); 547 reg1 &= ~TX39_UARTCTRL1_ENUART; 548 tx_conf_write(chip->sc_tc, ofs, reg1); 549 550 baudrate = TX39_UARTCLOCKHZ / (chip->sc_speed * 16) - 1; 551 reg = TX39_UARTCTRL2_BAUDRATE_SET(0, baudrate); 552 553 tx_conf_write(chip->sc_tc, TX39_UARTCTRL2_REG(chip->sc_slot), reg); 554 555 reg1 |= TX39_UARTCTRL1_ENUART; 556 tx_conf_write(chip->sc_tc, ofs, reg1); 557} 558 559int 560txcom_cnattach(int slot, int speed, int cflag) 561{ 562 cn_tab = &txcomcons; 563 564 txcom_chip.sc_tc = tx_conf_get_tag(); 565 txcom_chip.sc_slot = slot; 566 txcom_chip.sc_cflag = cflag; 567 txcom_chip.sc_speed = speed; 568 txcom_chip.sc_hwflags |= TXCOM_HW_CONSOLE; 569#if notyet 570 txcom_reset(&txcom_chip); 571#endif 572 txcom_setmode(&txcom_chip); 573 txcom_setbaudrate(&txcom_chip); 574 575 if (txcom_enable(&txcom_chip, true) != 0) 576 return 1; 577 578 return 0; 579} 580 581/* 582 * tty 583 */ 584void 585txcom_break(struct txcom_softc *sc, int on) 586{ 587 struct txcom_chip *chip = sc->sc_chip; 588 589 tx_conf_write(chip->sc_tc, TX39_UARTTXHOLD_REG(chip->sc_slot), 590 on ? TX39_UARTTXHOLD_BREAK : 0); 591} 592 593void 594txcom_modem(struct txcom_softc *sc, int on) 595{ 596 struct txcom_chip *chip = sc->sc_chip; 597 tx_chipset_tag_t tc = chip->sc_tc; 598 int slot = chip->sc_slot; 599 txreg_t reg; 600 601 /* assert DTR */ 602 if (IS_COM0(slot)) { 603 config_hook_call(CONFIG_HOOK_SET, 604 CONFIG_HOOK_COM0_DTR, 605 (void *)on); 606 } 607 608 reg = tx_conf_read(tc, TX39_UARTCTRL1_REG(slot)); 609 reg &= ~TX39_UARTCTRL1_ENUART; 610 tx_conf_write(tc, TX39_UARTCTRL1_REG(slot), reg); 611 612 if (on) { 613 reg &= ~TX39_UARTCTRL1_DISTXD; 614 } else { 615 reg |= TX39_UARTCTRL1_DISTXD; /* low UARTTXD */ 616 } 617 618 reg |= TX39_UARTCTRL1_ENUART; 619 tx_conf_write(tc, TX39_UARTCTRL1_REG(slot), reg); 620} 621 622void 623txcom_shutdown(struct txcom_softc *sc) 624{ 625 struct tty *tp = sc->sc_tty; 626 int s = spltty(); 627 628 /* Clear any break condition set with TIOCSBRK. */ 629 txcom_break(sc, 0); 630 631 /* 632 * Hang up if necessary. Wait a bit, so the other side has time to 633 * notice even if we immediately open the port again. 634 */ 635 if (ISSET(tp->t_cflag, HUPCL)) { 636 txcom_modem(sc, 0); 637 (void) tsleep(sc, TTIPRI, ttclos, hz); 638 } 639 640 641 /* Turn off interrupts if not the console. */ 642 if (!ISSET(sc->sc_chip->sc_hwflags, TXCOM_HW_CONSOLE)) { 643 txcom_disable(sc->sc_chip); 644 } 645 646 splx(s); 647} 648 649const char * 650__txcom_slotname(int slot) 651{ 652 static const char *slotname[] = {"UARTA", "UARTB", "unknown"}; 653 654 if (slot != 0 && slot != 1) 655 return slotname[2]; 656 657 return slotname[slot]; 658} 659 660int 661txcom_frameerr_intr(void *arg) 662{ 663 struct txcom_softc *sc = arg; 664 665 printf("%s frame error\n", __txcom_slotname(sc->sc_chip->sc_slot)); 666 667 return 0; 668} 669 670int 671txcom_parityerr_intr(void *arg) 672{ 673 struct txcom_softc *sc = arg; 674 675 printf("%s parity error\n", __txcom_slotname(sc->sc_chip->sc_slot)); 676 677 return 0; 678} 679 680int 681txcom_break_intr(void *arg) 682{ 683 struct txcom_softc *sc = arg; 684 685 printf("%s break\n", __txcom_slotname(sc->sc_chip->sc_slot)); 686 687 return 0; 688} 689 690int 691txcom_rxintr(void *arg) 692{ 693 struct txcom_softc *sc = arg; 694 struct txcom_chip *chip = sc->sc_chip; 695 u_int8_t c; 696 697 c = TX39_UARTRXHOLD_RXDATA( 698 tx_conf_read(chip->sc_tc, 699 TX39_UARTRXHOLD_REG(chip->sc_slot))); 700 701 sc->sc_rbuf[sc->sc_rbput] = c; 702 sc->sc_rbput = (sc->sc_rbput + 1) % TXCOM_RING_MASK; 703 704 softint_schedule(sc->sc_rxsoft_cookie); 705 706 return 0; 707} 708 709void 710txcom_rxsoft(void *arg) 711{ 712 struct txcom_softc *sc = arg; 713 struct tty *tp = sc->sc_tty; 714 int (*rint)(int, struct tty *); 715 int code; 716 int s, end, get; 717 718 rint = tp->t_linesw->l_rint; 719 720 s = spltty(); 721 end = sc->sc_rbput; 722 get = sc->sc_rbget; 723 724 while (get != end) { 725 code = sc->sc_rbuf[get]; 726 727 if ((*rint)(code, tp) == -1) { 728 /* 729 * The line discipline's buffer is out of space. 730 */ 731 } 732 get = (get + 1) % TXCOM_RING_MASK; 733 } 734 sc->sc_rbget = get; 735 736 splx(s); 737} 738 739int 740txcom_txintr(void *arg) 741{ 742 struct txcom_softc *sc = arg; 743 struct txcom_chip *chip = sc->sc_chip; 744 tx_chipset_tag_t tc = chip->sc_tc; 745 746 if (sc->sc_tbc > 0) { 747 tx_conf_write(tc, TX39_UARTTXHOLD_REG(chip->sc_slot), 748 (*sc->sc_tba & 749 TX39_UARTTXHOLD_TXDATA_MASK)); 750 sc->sc_tbc--; 751 sc->sc_tba++; 752 } else { 753 softint_schedule(sc->sc_txsoft_cookie); 754 } 755 756 return 0; 757} 758 759void 760txcom_txsoft(void *arg) 761{ 762 struct txcom_softc *sc = arg; 763 struct tty *tp = sc->sc_tty; 764 int s = spltty(); 765 766 CLR(tp->t_state, TS_BUSY); 767 if (ISSET(tp->t_state, TS_FLUSH)) { 768 CLR(tp->t_state, TS_FLUSH); 769 } else { 770 ndflush(&tp->t_outq, (int)(sc->sc_tba - tp->t_outq.c_cf)); 771 } 772 773 (*tp->t_linesw->l_start)(tp); 774 775 splx(s); 776} 777 778int 779txcomopen(dev_t dev, int flag, int mode, struct lwp *l) 780{ 781 struct txcom_softc *sc; 782 struct txcom_chip *chip; 783 struct tty *tp; 784 int s, err = ENXIO; 785 786 sc = device_lookup_private(&txcom_cd, minor(dev)); 787 if (sc == NULL) 788 return err; 789 790 chip = sc->sc_chip; 791 tp = sc->sc_tty; 792 793 if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp)) 794 return (EBUSY); 795 796 s = spltty(); 797 798 if (txcom_enable(sc->sc_chip, false)) { 799 splx(s); 800 goto out; 801 } 802 /* 803 * Do the following iff this is a first open. 804 */ 805 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 806 struct termios t; 807 808 tp->t_dev = dev; 809 810 t.c_ispeed = 0; 811 if (ISSET(chip->sc_hwflags, TXCOM_HW_CONSOLE)) { 812 t.c_ospeed = chip->sc_speed; 813 t.c_cflag = chip->sc_cflag; 814 } else { 815 t.c_ospeed = TTYDEF_SPEED; 816 t.c_cflag = TTYDEF_CFLAG; 817 } 818 819 if (ISSET(chip->sc_swflags, TIOCFLAG_CLOCAL)) 820 SET(t.c_cflag, CLOCAL); 821 if (ISSET(chip->sc_swflags, TIOCFLAG_CRTSCTS)) 822 SET(t.c_cflag, CRTSCTS); 823 if (ISSET(chip->sc_swflags, TIOCFLAG_MDMBUF)) 824 SET(t.c_cflag, MDMBUF); 825 826 /* Make sure txcomparam() will do something. */ 827 tp->t_ospeed = 0; 828 txcomparam(tp, &t); 829 830 tp->t_iflag = TTYDEF_IFLAG; 831 tp->t_oflag = TTYDEF_OFLAG; 832 tp->t_lflag = TTYDEF_LFLAG; 833 834 ttychars(tp); 835 ttsetwater(tp); 836 837 /* 838 * Turn on DTR. We must always do this, even if carrier is not 839 * present, because otherwise we'd have to use TIOCSDTR 840 * immediately after setting CLOCAL, which applications do not 841 * expect. We always assert DTR while the device is open 842 * unless explicitly requested to deassert it. 843 */ 844 txcom_modem(sc, 1); 845 846 /* Clear the input ring, and unblock. */ 847 sc->sc_rbget = sc->sc_rbput = 0; 848 } 849 850 splx(s); 851#define TXCOMDIALOUT(x) (minor(x) & 0x80000) 852 if ((err = ttyopen(tp, TXCOMDIALOUT(dev), ISSET(flag, O_NONBLOCK)))) { 853 DPRINTF("ttyopen failed\n"); 854 goto out; 855 } 856 if ((err = (*tp->t_linesw->l_open)(dev, tp))) { 857 DPRINTF("line dicipline open failed\n"); 858 goto out; 859 } 860 861 return err; 862 863 out: 864 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 865 /* 866 * We failed to open the device, and nobody else had it opened. 867 * Clean up the state as appropriate. 868 */ 869 txcom_shutdown(sc); 870 } 871 872 return err; 873 874} 875 876int 877txcomclose(dev_t dev, int flag, int mode, struct lwp *l) 878{ 879 struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev)); 880 struct tty *tp = sc->sc_tty; 881 882 /* XXX This is for cons.c. */ 883 if (!ISSET(tp->t_state, TS_ISOPEN)) 884 return 0; 885 886 (*tp->t_linesw->l_close)(tp, flag); 887 ttyclose(tp); 888 889 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 890 /* 891 * Although we got a last close, the device may still be in 892 * use; e.g. if this was the dialout node, and there are still 893 * processes waiting for carrier on the non-dialout node. 894 */ 895 txcom_shutdown(sc); 896 } 897 898 return 0; 899} 900 901int 902txcomread(dev_t dev, struct uio *uio, int flag) 903{ 904 struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev)); 905 struct tty *tp = sc->sc_tty; 906 907 return ((*tp->t_linesw->l_read)(tp, uio, flag)); 908} 909 910int 911txcomwrite(dev_t dev, struct uio *uio, int flag) 912{ 913 struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev)); 914 struct tty *tp = sc->sc_tty; 915 916 return ((*tp->t_linesw->l_write)(tp, uio, flag)); 917} 918 919int 920txcompoll(dev_t dev, int events, struct lwp *l) 921{ 922 struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev)); 923 struct tty *tp = sc->sc_tty; 924 925 return ((*tp->t_linesw->l_poll)(tp, events, l)); 926} 927 928struct tty * 929txcomtty(dev_t dev) 930{ 931 struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev)); 932 933 return sc->sc_tty; 934} 935 936int 937txcomioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l) 938{ 939 struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev)); 940 struct tty *tp = sc->sc_tty; 941 int s, err; 942 943 err = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l); 944 if (err != EPASSTHROUGH) { 945 return err; 946 } 947 948 err = ttioctl(tp, cmd, data, flag, l); 949 if (err != EPASSTHROUGH) { 950 return err; 951 } 952 953 err = 0; 954 955 s = spltty(); 956 957 switch (cmd) { 958 default: 959 err = EPASSTHROUGH; 960 break; 961 962 case TIOCSBRK: 963 txcom_break(sc, 1); 964 break; 965 966 case TIOCCBRK: 967 txcom_break(sc, 0); 968 break; 969 970 case TIOCSDTR: 971 txcom_modem(sc, 1); 972 break; 973 974 case TIOCCDTR: 975 txcom_modem(sc, 0); 976 break; 977 978 case TIOCGFLAGS: 979 *(int *)data = sc->sc_chip->sc_swflags; 980 break; 981 982 case TIOCSFLAGS: 983 err = kauth_authorize_device_tty(l->l_cred, 984 KAUTH_DEVICE_TTY_PRIVSET, tp); 985 if (err) { 986 break; 987 } 988 sc->sc_chip->sc_swflags = *(int *)data; 989 break; 990 991 } 992 993 splx(s); 994 995 return err; 996} 997 998void 999txcomstop(struct tty *tp, int flag) 1000{ 1001 struct txcom_softc *sc; 1002 int s; 1003 1004 sc = device_lookup_private(&txcom_cd, minor(tp->t_dev)); 1005 1006 s = spltty(); 1007 1008 if (ISSET(tp->t_state, TS_BUSY)) { 1009 /* Stop transmitting at the next chunk. */ 1010 sc->sc_tbc = 0; 1011 sc->sc_heldtbc = 0; 1012 if (!ISSET(tp->t_state, TS_TTSTOP)) 1013 SET(tp->t_state, TS_FLUSH); 1014 } 1015 1016 splx(s); 1017} 1018 1019void 1020txcomstart(struct tty *tp) 1021{ 1022 struct txcom_softc *sc; 1023 struct txcom_chip *chip; 1024 tx_chipset_tag_t tc; 1025 int slot; 1026 int s; 1027 1028 sc = device_lookup_private(&txcom_cd, minor(tp->t_dev)); 1029 chip = sc->sc_chip; 1030 tc = chip->sc_tc; 1031 slot = chip->sc_slot; 1032 1033 s = spltty(); 1034 1035 if (!__txcom_txbufready(chip, 0) || 1036 ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP)) 1037 goto out; 1038 1039 if (!ttypull(tp)) 1040 goto out; 1041 1042 sc->sc_tba = tp->t_outq.c_cf; 1043 sc->sc_tbc = ndqb(&tp->t_outq, 0); 1044 SET(tp->t_state, TS_BUSY); 1045 1046 /* Output the first character of the contiguous buffer. */ 1047 tx_conf_write(tc, TX39_UARTTXHOLD_REG(slot), 1048 (*sc->sc_tba & TX39_UARTTXHOLD_TXDATA_MASK)); 1049 1050 sc->sc_tbc--; 1051 sc->sc_tba++; 1052 1053 out: 1054 splx(s); 1055} 1056 1057/* 1058 * Set TXcom tty parameters from termios. 1059 */ 1060int 1061txcomparam(struct tty *tp, struct termios *t) 1062{ 1063 struct txcom_softc *sc; 1064 struct txcom_chip *chip; 1065 int ospeed; 1066 int s; 1067 1068 sc = device_lookup_private(&txcom_cd, minor(tp->t_dev)); 1069 if (sc == NULL) 1070 return ENXIO; 1071 1072 ospeed = t->c_ospeed; 1073 1074 /* Check requested parameters. */ 1075 if (ospeed < 0) { 1076 return EINVAL; 1077 } 1078 if (t->c_ispeed && t->c_ispeed != ospeed) { 1079 return EINVAL; 1080 } 1081 1082 s = spltty(); 1083 chip = sc->sc_chip; 1084 /* 1085 * For the console, always force CLOCAL and !HUPCL, so that the port 1086 * is always active. 1087 */ 1088 if (ISSET(chip->sc_swflags, TIOCFLAG_SOFTCAR) || 1089 ISSET(chip->sc_hwflags, TXCOM_HW_CONSOLE)) { 1090 SET(t->c_cflag, CLOCAL); 1091 CLR(t->c_cflag, HUPCL); 1092 } 1093 splx(s); 1094 1095 /* 1096 * If we're not in a mode that assumes a connection is present, then 1097 * ignore carrier changes. 1098 */ 1099 if (ISSET(t->c_cflag, CLOCAL | MDMBUF)) 1100 chip->sc_dcd = 0; 1101 else 1102 chip->sc_dcd = 1; 1103 1104 /* 1105 * Only whack the UART when params change. 1106 * Some callers need to clear tp->t_ospeed 1107 * to make sure initialization gets done. 1108 */ 1109 if (tp->t_ospeed == ospeed && tp->t_cflag == t->c_cflag) { 1110 return 0; 1111 } 1112 1113 s = spltty(); 1114 chip = sc->sc_chip; 1115 chip->sc_speed = ospeed; 1116 chip->sc_cflag = t->c_cflag; 1117 1118 txcom_setmode(chip); 1119 txcom_setbaudrate(chip); 1120 1121 /* And copy to tty. */ 1122 tp->t_ispeed = 0; 1123 tp->t_ospeed = chip->sc_speed; 1124 tp->t_cflag = chip->sc_cflag; 1125 1126 /* 1127 * Update the tty layer's idea of the carrier bit, in case we changed 1128 * CLOCAL or MDMBUF. We don't hang up here; we only do that by 1129 * explicit request. 1130 */ 1131 (void) (*tp->t_linesw->l_modem)(tp, chip->sc_dcd); 1132 1133 /* 1134 * If hardware flow control is disabled, unblock any hard flow 1135 * control state. 1136 */ 1137 if (!ISSET(chip->sc_cflag, CHWFLOW)) { 1138 txcomstart(tp); 1139 } 1140 1141 splx(s); 1142 1143 return 0; 1144} 1145 1146int 1147txcom_dcd_hook(void *arg, int type, long id, void *msg) 1148{ 1149 struct txcom_softc *sc = arg; 1150 struct tty *tp = sc->sc_tty; 1151 struct txcom_chip *chip = sc->sc_chip; 1152 int modem = !(int)msg; /* p-edge 1, n-edge 0 */ 1153 1154 DPRINTF("DCD %s\n", modem ? "ON" : "OFF"); 1155 1156 if (modem && chip->sc_dcd) 1157 (void) (*tp->t_linesw->l_modem)(tp, chip->sc_dcd); 1158 1159 return 0; 1160} 1161 1162int 1163txcom_cts_hook(void *arg, int type, long id, void *msg) 1164{ 1165 struct txcom_softc *sc = arg; 1166 struct tty *tp = sc->sc_tty; 1167 struct txcom_chip *chip = sc->sc_chip; 1168 int clear = !(int)msg; /* p-edge 1, n-edge 0 */ 1169 1170 DPRINTF("CTS %s\n", clear ? "ON" : "OFF"); 1171 1172 if (chip->sc_msr_cts) { 1173 if (!clear) { 1174 chip->sc_tx_stopped = 1; 1175 } else { 1176 chip->sc_tx_stopped = 0; 1177 (*tp->t_linesw->l_start)(tp); 1178 } 1179 } 1180 1181 return 0; 1182} 1183 1184#ifdef TX39UARTDEBUG 1185void 1186txcom_dump(struct txcom_chip *chip) 1187{ 1188 tx_chipset_tag_t tc = chip->sc_tc; 1189 int slot = chip->sc_slot; 1190 txreg_t reg; 1191 1192 reg = tx_conf_read(tc, TX39_UARTCTRL1_REG(slot)); 1193#define ISSETPRINT(r, m) \ 1194 dbg_bitmask_print(r, TX39_UARTCTRL1_##m, #m) 1195 ISSETPRINT(reg, UARTON); 1196 ISSETPRINT(reg, EMPTY); 1197 ISSETPRINT(reg, PRXHOLDFULL); 1198 ISSETPRINT(reg, RXHOLDFULL); 1199 ISSETPRINT(reg, ENDMARX); 1200 ISSETPRINT(reg, ENDMATX); 1201 ISSETPRINT(reg, TESTMODE); 1202 ISSETPRINT(reg, ENBREAHALT); 1203 ISSETPRINT(reg, ENDMATEST); 1204 ISSETPRINT(reg, ENDMALOOP); 1205 ISSETPRINT(reg, PULSEOPT2); 1206 ISSETPRINT(reg, PULSEOPT1); 1207 ISSETPRINT(reg, DTINVERT); 1208 ISSETPRINT(reg, DISTXD); 1209 ISSETPRINT(reg, TWOSTOP); 1210 ISSETPRINT(reg, LOOPBACK); 1211 ISSETPRINT(reg, BIT7); 1212 ISSETPRINT(reg, EVENPARITY); 1213 ISSETPRINT(reg, ENPARITY); 1214 ISSETPRINT(reg, ENUART); 1215} 1216#endif /* TX39UARTDEBUG */ 1217