1/* $NetBSD: plumpower.c,v 1.11 2005/12/11 12:17:33 christos Exp $ */ 2 3/*- 4 * Copyright (c) 1999, 2000 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by UCHIYAMA Yasushi. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32#include <sys/cdefs.h> 33__KERNEL_RCSID(0, "$NetBSD: plumpower.c,v 1.11 2005/12/11 12:17:33 christos Exp $"); 34 35#undef PLUMPOWERDEBUG 36 37#include <sys/param.h> 38#include <sys/systm.h> 39#include <sys/device.h> 40#include <sys/malloc.h> 41 42#include <machine/bus.h> 43#include <machine/intr.h> 44 45#include <hpcmips/tx/tx39var.h> 46#include <hpcmips/dev/plumvar.h> 47#include <hpcmips/dev/plumpowervar.h> 48#include <hpcmips/dev/plumpowerreg.h> 49 50#ifdef PLUMPOWERDEBUG 51int plumpower_debug = 1; 52#define DPRINTF(arg) if (plumpower_debug) printf arg; 53#define DPRINTFN(n, arg) if (plumpower_debug > (n)) printf arg; 54#else 55#define DPRINTF(arg) 56#define DPRINTFN(n, arg) 57#endif 58 59int plumpower_match(struct device *, struct cfdata *, void *); 60void plumpower_attach(struct device *, struct device *, void *); 61 62struct plumpower_softc { 63 struct device sc_dev; 64 plum_chipset_tag_t sc_pc; 65 bus_space_tag_t sc_regt; 66 bus_space_handle_t sc_regh; 67}; 68 69CFATTACH_DECL(plumpower, sizeof(struct plumpower_softc), 70 plumpower_match, plumpower_attach, NULL, NULL); 71 72#ifdef PLUMPOWERDEBUG 73static void plumpower_dump(struct plumpower_softc *); 74#endif 75 76int 77plumpower_match(struct device *parent, struct cfdata *cf, void *aux) 78{ 79 return 2; /* 1st attach group */ 80} 81 82void 83plumpower_attach(struct device *parent, struct device *self, void *aux) 84{ 85 struct plum_attach_args *pa = aux; 86 struct plumpower_softc *sc = (void*)self; 87 88 printf("\n"); 89 sc->sc_pc = pa->pa_pc; 90 sc->sc_regt = pa->pa_regt; 91 92 if (bus_space_map(sc->sc_regt, PLUM_POWER_REGBASE, 93 PLUM_POWER_REGSIZE, 0, &sc->sc_regh)) { 94 printf(": register map failed\n"); 95 return; 96 } 97 plum_conf_register_power(sc->sc_pc, (void*)sc); 98#ifdef PLUMPOWERDEBUG 99 plumpower_dump(sc); 100#endif 101 /* disable all power/clock */ 102 plum_conf_write(sc->sc_regt, sc->sc_regh, 103 PLUM_POWER_PWRCONT_REG, 0); 104 plum_conf_write(sc->sc_regt, sc->sc_regh, 105 PLUM_POWER_CLKCONT_REG, 0); 106 107 /* enable MCS interface from TX3922 */ 108 plum_conf_write(sc->sc_regt, sc->sc_regh, PLUM_POWER_INPENA_REG, 109 PLUM_POWER_INPENA); 110} 111 112void 113plum_power_ioreset(plum_chipset_tag_t pc) 114{ 115 struct plumpower_softc *sc = pc->pc_powert; 116 bus_space_tag_t regt = sc->sc_regt; 117 bus_space_handle_t regh = sc->sc_regh; 118 119 plum_conf_write(regt, regh, PLUM_POWER_RESETC_REG, 120 PLUM_POWER_RESETC_IO5CL1 | 121 PLUM_POWER_RESETC_IO5CL1); 122 plum_conf_write(regt, regh, PLUM_POWER_RESETC_REG, 0); 123} 124 125void* 126plum_power_establish(plum_chipset_tag_t pc, int src) 127{ 128 struct plumpower_softc *sc = pc->pc_powert; 129 bus_space_tag_t regt = sc->sc_regt; 130 bus_space_handle_t regh = sc->sc_regh; 131 plumreg_t pwrreg, clkreg; 132 133 pwrreg = plum_conf_read(regt, regh, PLUM_POWER_PWRCONT_REG); 134 clkreg = plum_conf_read(regt, regh, PLUM_POWER_CLKCONT_REG); 135 136 switch(src) { 137 default: 138 panic("plum_power_establish: unknown power source"); 139 case PLUM_PWR_LCD: 140 pwrreg |= PLUM_POWER_PWRCONT_LCDPWR; 141 plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg); 142 pwrreg |= PLUM_POWER_PWRCONT_LCDDSP; 143 plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg); 144 pwrreg |= PLUM_POWER_PWRCONT_LCDOE; 145 break; 146 case PLUM_PWR_BKL: 147 pwrreg |= PLUM_POWER_PWRCONT_BKLIGHT; 148 break; 149 case PLUM_PWR_IO5: 150 /* reset I/O bus (High/Low) */ 151 plum_power_ioreset(pc); 152 153 /* supply power */ 154 pwrreg |= PLUM_POWER_PWRCONT_IO5PWR; 155 plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg); 156 157 /* output enable & supply clock */ 158 pwrreg |= PLUM_POWER_PWRCONT_IO5OE; 159 clkreg |= PLUM_POWER_CLKCONT_IO5CLK; 160 break; 161 case PLUM_PWR_EXTPW0: 162 pwrreg |= PLUM_POWER_PWRCONT_EXTPW0; 163 break; 164 case PLUM_PWR_EXTPW1: 165 pwrreg |= PLUM_POWER_PWRCONT_EXTPW1; 166 break; 167 case PLUM_PWR_EXTPW2: 168 pwrreg |= PLUM_POWER_PWRCONT_EXTPW2; 169 break; 170 case PLUM_PWR_USB: 171 /* output enable */ 172 pwrreg |= PLUM_POWER_PWRCONT_USBEN; 173 /* supply clock to the USB host controller */ 174 clkreg |= PLUM_POWER_CLKCONT_USBCLK1; 175 /* 176 * clock supply is adaptively controlled by hardware 177 * (recommended) 178 */ 179 clkreg &= ~PLUM_POWER_CLKCONT_USBCLK2; 180 break; 181 case PLUM_PWR_SM: 182 clkreg |= PLUM_POWER_CLKCONT_SMCLK; 183 break; 184 case PLUM_PWR_PCC1: 185 clkreg |= PLUM_POWER_CLKCONT_PCCCLK1; 186 break; 187 case PLUM_PWR_PCC2: 188 clkreg |= PLUM_POWER_CLKCONT_PCCCLK2; 189 break; 190 } 191 192 plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg); 193 plum_conf_write(regt, regh, PLUM_POWER_CLKCONT_REG, clkreg); 194#ifdef PLUMPOWERDEBUG 195 plumpower_dump(sc); 196#endif 197 return (void*)src; 198} 199 200void 201plum_power_disestablish(plum_chipset_tag_t pc, int ph) 202{ 203 struct plumpower_softc *sc = pc->pc_powert; 204 bus_space_tag_t regt = sc->sc_regt; 205 bus_space_handle_t regh = sc->sc_regh; 206 int src = (int)ph; 207 plumreg_t pwrreg, clkreg; 208 209 pwrreg = plum_conf_read(regt, regh, PLUM_POWER_PWRCONT_REG); 210 clkreg = plum_conf_read(regt, regh, PLUM_POWER_CLKCONT_REG); 211 212 switch(src) { 213 default: 214 panic("plum_power_disestablish: unknown power source"); 215 case PLUM_PWR_LCD: 216 pwrreg &= ~PLUM_POWER_PWRCONT_LCDOE; 217 plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg); 218 pwrreg &= ~PLUM_POWER_PWRCONT_LCDDSP; 219 plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg); 220 pwrreg &= ~PLUM_POWER_PWRCONT_LCDPWR; 221 break; 222 case PLUM_PWR_BKL: 223 pwrreg &= ~PLUM_POWER_PWRCONT_BKLIGHT; 224 break; 225 case PLUM_PWR_IO5: 226 pwrreg &= ~(PLUM_POWER_PWRCONT_IO5PWR | 227 PLUM_POWER_PWRCONT_IO5OE); 228 clkreg &= ~PLUM_POWER_CLKCONT_IO5CLK; 229 break; 230 case PLUM_PWR_EXTPW0: 231 pwrreg &= ~PLUM_POWER_PWRCONT_EXTPW0; 232 break; 233 case PLUM_PWR_EXTPW1: 234 pwrreg &= ~PLUM_POWER_PWRCONT_EXTPW1; 235 break; 236 case PLUM_PWR_EXTPW2: 237 pwrreg &= ~PLUM_POWER_PWRCONT_EXTPW2; 238 break; 239 case PLUM_PWR_USB: 240 pwrreg &= ~PLUM_POWER_PWRCONT_USBEN; 241 clkreg &= ~(PLUM_POWER_CLKCONT_USBCLK1 | 242 PLUM_POWER_CLKCONT_USBCLK2); 243 break; 244 case PLUM_PWR_SM: 245 clkreg &= ~PLUM_POWER_CLKCONT_SMCLK; 246 break; 247 case PLUM_PWR_PCC1: 248 clkreg &= ~PLUM_POWER_CLKCONT_PCCCLK1; 249 break; 250 case PLUM_PWR_PCC2: 251 clkreg &= ~PLUM_POWER_CLKCONT_PCCCLK2; 252 break; 253 } 254 255 plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg); 256 plum_conf_write(regt, regh, PLUM_POWER_CLKCONT_REG, clkreg); 257#ifdef PLUMPOWERDEBUG 258 plumpower_dump(sc); 259#endif 260} 261 262#ifdef PLUMPOWERDEBUG 263#define ISPOWERSUPPLY(r, m) dbg_bitmask_print(r, PLUM_POWER_PWRCONT_##m, #m) 264#define ISCLOCKSUPPLY(r, m) dbg_bitmask_print(r, PLUM_POWER_CLKCONT_##m, #m) 265static void 266plumpower_dump(struct plumpower_softc *sc) 267{ 268 bus_space_tag_t regt = sc->sc_regt; 269 bus_space_handle_t regh = sc->sc_regh; 270 plumreg_t reg; 271 272 reg = plum_conf_read(regt, regh, PLUM_POWER_PWRCONT_REG); 273 printf(" power:"); 274 ISPOWERSUPPLY(reg, USBEN); 275 ISPOWERSUPPLY(reg, IO5OE); 276 ISPOWERSUPPLY(reg, LCDOE); 277 ISPOWERSUPPLY(reg, EXTPW2); 278 ISPOWERSUPPLY(reg, EXTPW1); 279 ISPOWERSUPPLY(reg, EXTPW0); 280 ISPOWERSUPPLY(reg, IO5PWR); 281 ISPOWERSUPPLY(reg, BKLIGHT); 282 ISPOWERSUPPLY(reg, LCDPWR); 283 ISPOWERSUPPLY(reg, LCDDSP); 284 reg = plum_conf_read(regt, regh, PLUM_POWER_CLKCONT_REG); 285 printf("\n clock:"); 286 ISCLOCKSUPPLY(reg, USBCLK2); 287 ISCLOCKSUPPLY(reg, USBCLK1); 288 ISCLOCKSUPPLY(reg, IO5CLK); 289 ISCLOCKSUPPLY(reg, SMCLK); 290 ISCLOCKSUPPLY(reg, PCCCLK2); 291 ISCLOCKSUPPLY(reg, PCCCLK1); 292 reg = plum_conf_read(regt, regh, PLUM_POWER_INPENA_REG); 293 printf("\n MCS interface %sebled", 294 reg & PLUM_POWER_INPENA ? "en" : "dis"); 295 reg = plum_conf_read(regt, regh, PLUM_POWER_RESETC_REG); 296 printf("\n IO5 reset:%s %s", 297 reg & PLUM_POWER_RESETC_IO5CL0 ? "CLRL" : "", 298 reg & PLUM_POWER_RESETC_IO5CL1 ? "CLRH" : ""); 299 printf("\n"); 300} 301#endif /* PLUMPOWERDEBUG */ 302 303