1# Copyright 1998, 1999, 2000, 2001, 2004, 2007, 2008, 2009, 2010, 2011 2# Free Software Foundation, Inc. 3 4# This program is free software; you can redistribute it and/or modify 5# it under the terms of the GNU General Public License as published by 6# the Free Software Foundation; either version 3 of the License, or 7# (at your option) any later version. 8# 9# This program is distributed in the hope that it will be useful, 10# but WITHOUT ANY WARRANTY; without even the implied warranty of 11# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12# GNU General Public License for more details. 13# 14# You should have received a copy of the GNU General Public License 15# along with this program. If not, see <http://www.gnu.org/licenses/>. 16 17# This file was written by Elena Zannoni (ezannoni@cygnus.com) 18 19 20if $tracelevel then { 21 strace $tracelevel 22} 23 24 25set testfile "call-ar-st" 26set srcfile ${testfile}.c 27set binfile ${objdir}/${subdir}/${testfile} 28 29# Test depends on printf, which the sparclet stub doesn't support. 30if { [istarget "sparclet-*-*"] } { 31 return 0; 32} 33 34if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { 35 untested "couldn't compile ${srcdir}/${subdir}/${srcfile}" 36 return -1 37} 38 39 40# Create and source the file that provides information about the compiler 41# used to compile the test case. 42 43if [get_compiler_info ${binfile}] { 44 return -1; 45} 46 47# Some targets can't call functions, so don't even bother with this 48# test. 49if [target_info exists gdb,cannot_call_functions] { 50 setup_xfail "*-*-*" 2416 51 fail "This target can not call functions" 52 continue 53} 54 55set oldtimeout $timeout 56set timeout [expr "$timeout + 60"] 57 58# Start with a fresh gdb. 59 60gdb_exit 61gdb_start 62gdb_reinitialize_dir $srcdir/$subdir 63gdb_load ${binfile} 64gdb_test_no_output "set print sevenbit-strings" 65gdb_test_no_output "set print address off" 66gdb_test_no_output "set width 0" 67 68 69if ![runto_main] then { 70 perror "couldn't run to breakpoint" 71 continue 72} 73 74get_debug_format 75 76#go -until 1209 77gdb_test "tbreak 1209" \ 78 "Temporary breakpoint \[0-9\]+.*file.*$srcfile, line 1209.*" \ 79 "tbreakpoint line 1209" 80 81gdb_test continue \ 82"Continuing\\..*main \\(\\) at.*$srcfile:1209.*" \ 83"run until breakpoint set at a line" 84 85 86#call print_double_array(double_array) 87if {![gdb_skip_float_test "print print_double_array(double_array)"] && \ 88 ![gdb_skip_stdio_test "print print_double_array(double_array)"] } { 89 gdb_test_sequence "print print_double_array(double_array)" "" { 90 "\[ \t\r\n\]+array_d :" 91 "\[ \t\r\n\]+=========" 92 "\[ \t\r\n\]+0.000000" 93 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]" 94 "\[ \t\r\n\]+" 95 } 96} 97 98#call print_char_array(char_array) 99 100if ![gdb_skip_stdio_test "print_char_array(char_array)"] { 101 gdb_test_sequence "print print_char_array(char_array)" "" { 102 "\[ \t\r\n\]+array_c :" 103 "\[ \t\r\n\]+=========" 104 "\[ \t\r\n\]+\[ \t\r\n\]+Z" 105 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" 106 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" 107 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+" 108 } 109} 110 111#go -until 1216 112gdb_test "tbreak 1216" \ 113"Temporary breakpoint.*file.*$srcfile, line 1216.*" \ 114"tbreakpoint line 1216" 115 116if ![gdb_skip_stdio_test "continue to 1216"] { 117 gdb_test_sequence "continue" "continue to 1216" { 118 "\[ \t\r\n\]+array_c :" 119 "\[ \t\r\n\]+=========" 120 "\[ \t\r\n\]+\[ \t\r\n\]+Z" 121 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" 122 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" 123 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa" 124 "\[ \t\r\n\]+main.*at.*:1216" 125 "\[ \t\r\n\]+1216.*print_double_array\\(double_array\\)" 126 } 127} else { 128 gdb_test "continue" ".*" "" 129} 130 131# I am disabling this test, because it takes too long. I verified by 132# hand that it works, feel free to check for yourself. 133#call print_all_arrays(integer_array, char_array, float_array, double_array) 134#send_gdb "print print_all_arrays(integer_array, char_array, float_array, double_array)\n" 135#gdb_expect { 136# -re ".*array_i :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0\[ \t\r\n\]+-1 -2 -3 -4 -5 -6 -7 -8\[ \t\r\n\]+-9 -10 -11 -12 -13 -14 -15 -16\[ \t\r\n\]+-17 -18 -19 -20 -21 -22 -23 -24\[ \t\r\n\]+-25 -26 -27 -28 -29 -30 -31 -32\[ \t\r\n\]+-33 -34 -35 -36 -37 -38 -39 -40\[ \t\r\n\]+-41 -42 -43 -44 -45 -46 -47 -48\[ \t\r\n\]+-49\[ \t\r\n\]+\[ \t\r\n\]+array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+array_f :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+0.142450 0.284900 0.427350 0.569801 0.712251 0.854701 0.997151 1.139601\[ \t\r\n\]+1.282051 1.424501 1.566952 1.709402 1.851852 1.994302\[ \t\r\n\]+\[ \t\r\n\]+array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800\[ \t\r\n\]+586.41750 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200\[ \t\r\n\]+2275.299900 2298.756600 2322.213300.*$gdb_prompt $" { 137# pass "print print_all_arrays(integer_array, char_array, float_array, double_array)" 138# } 139# -re ".*$gdb_prompt $" { fail "print print_all_arrays(integer_array, char_array, float_array, double_array)" } 140# timeout { fail "(timeout) print print_all_arrays(integer_array, char_array, float_array, double_array)" } 141# } 142 143#set timeout $oldtimeout 144#go -until 1220 145gdb_test "tbreak 1220" \ 146 "Temporary breakpoint.* file .*$srcfile, line 1220.*" \ 147 "tbreakpoint line 1220" 148 149if {![gdb_skip_float_test "continuing to breakpoint 1220"] && \ 150 ![gdb_skip_stdio_test "continuing to breakpoint 1220"] } { 151 gdb_test_sequence "continue" "continuing to breakpoint 1220" { 152 "Continuing\\." 153 "\[ \t\r\n\]+array_d :" 154 "\[ \t\r\n\]+=========" 155 "\[ \t\r\n\]+0.000000" 156 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" 157 "\[ \t\r\n\]+" 158 "array_f :" 159 "student id :\[\t \]+.*YELLOW" 160 "array_i :" 161 "main \\(\\) at .*call-ar-st.c:1220\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)." 162 } 163} else { 164 gdb_test "continue" ".*" "" 165} 166 167#step 168gdb_test "step" \ 169 "print_all_arrays \\(array_i=, array_c=.ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=, array_d=\\) at .*call-ar-st.c:306\[ \t\r\n\]+306.*print_int_array\\(array_i\\);.*" \ 170 "step inside print_all_arrays" 171 172#step -over 173if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] { 174 gdb_test "next" \ 175 "array_i :.*307.*print_char_array.*" \ 176 "next over print_int_array in print-all_arrays" 177} else { 178 gdb_test "next" ".*" "" 179} 180 181#call print_double_array(array_d) 182if {![gdb_skip_float_test "print print_double_array(array_d)"] && \ 183 ![gdb_skip_stdio_test "print print_double_array(array_d)"] } { 184 gdb_test_sequence "print print_double_array(array_d)" "" { 185 "array_d :" 186 "\[ \t\r\n\]+=========" 187 "\[ \t\r\n\]+\[ \t\r\n\]+0.000000" 188 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" 189 "\[ \t\r\n\]+" 190 } 191} 192 193#go -until 1236 194gdb_test "tbreak 1236" \ 195"Temporary breakpoint.* file .*$srcfile, line 1236.*" \ 196"tbreakpoint line 1236" 197 198if {![gdb_skip_float_test "continuing to 1236"] && \ 199 ![gdb_skip_stdio_test "continuing to 1236"] } { 200 gdb_test_sequence "continue" "continuing to 1236" { 201 "Continuing\\..*array_c" 202 "array_f" 203 "\[ \t\r\n\]+array_d :" 204 "\[ \t\r\n\]+=========" 205 "\[ \t\r\n\]+0.000000" 206 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" 207 "\[ \t\r\n\]+.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1236.*printf\\(.BYE BYE FOR NOW.n.\\)." 208 } 209} else { 210 gdb_test "continue" ".*" "" 211} 212 213 214#call sum_array_print(10, *list1, *list2, *list3, *list4) 215 216if ![gdb_skip_stdio_test "print sum_array_print(...)"] { 217 gdb_test "print sum_array_print(10, *list1, *list2, *list3, *list4)" \ 218 ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*" \ 219 "print sum_array_print(10, *list1, *list2, *list3, *list4)" 220} 221 222#step over 223if ![gdb_skip_stdio_test "next to 1237"] { 224 gdb_test "next" \ 225 "BYE BYE FOR NOW.*1237.*printf\\(.VERY GREEN GRASS.n.\\);.*" \ 226 "next to 1237" 227} else { 228 gdb_test "next" ".*" "" 229} 230 231#call print_array_rep(\*list1, \*list2, \*list3) 232 233if ![gdb_skip_stdio_test "print print_array_rep(...)"] { 234 gdb_test "print print_array_rep(\*list1, \*list2, \*list3)" \ 235 "Contents of linked list3:.*" \ 236 "print print_array_rep(*list1, *list2, *list3)" 237} 238 239#go -until 1241 240gdb_test "tbreak 1241" \ 241 "Temporary breakpoint..* file .*$srcfile, line 1241.*" \ 242 "tbreakpoint line 1241" 243 244gdb_test "continue" \ 245 "main \\(\\) at .*call-ar-st.c:1241\r\n1241\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*" \ 246 "continue to 1241" 247 248 249# Run into sum_array_print, and verify that the arguments were passed 250# accurately. 251# 252# Note that we shouldn't use a `step' here to get into 253# sum_array_print; GCC may emit calls to memcpy to put the arguments 254# in the right place, and a step may end up in memcpy instead. This 255# may itself be a bug, but it's not the one we're trying to catch 256# here. I've added something to step-test.exp for this. 257gdb_test "break sum_array_print" \ 258 ".*Breakpoint ${decimal}: file .*call-ar-st.c, line.*" \ 259 "set breakpoint in sum_array_print" 260gdb_test_no_output "set print frame-arguments all" 261gdb_test "continue" \ 262 ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:1105\[ \t\n\r\]+1105.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \ 263 "check args of sum_array_print" 264 265#call print_array_rep(linked_list1, linked_list2, linked_list3) 266# this calls works from gdb without gdb_expect. But it does seem to hang 267#from within gdb_expect. 268#I comment this out 269#send_gdb "print print_array_rep(linked_list1, linked_list2, linked_list3)\n" 270#gdb_expect { 271# -re ".*Contents of linked list1:\[ \t\n\r\]+Element Value . Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*4.*1\[ \t\n\r\]+.*6.*2\[ \t\n\r\]+.*8.*3\[ \t\n\r\]+.*10.*4\[ \t\n\r\]+.*12.*5\[ \t\n\r\]+.*14.*6\[ \t\n\r\]+.*16.*7\[ \t\n\r\]+.*18.*8\[ \t\n\r\]+.*20.*9\[ \t\n\r\]+.*22.*10\[ \t\n\r\]+Contents of linked list2:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*8.*1\[ \t\n\r\]+.*10.*2\[ \t\n\r\]+.*12.*3\[ \t\n\r\]+.*14.*4\[ \t\n\r\]+.*16.*5\[ \t\n\r\]+.*18.*6\[ \t\n\r\]+.*20.*7\[ \t\n\r\]+.*22.*8\[ \t\n\r\]+.*24.*9\[ \t\n\r\]+.*26.*10\[ \t\n\r\]+Contents of linked list3:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*10.*1\[ \t\n\r\]+.*12.*2\[ \t\n\r\]+.*14.*3\[ \t\n\r\]+.*16.*4\[ \t\n\r\]+.*18.*5\[ \t\n\r\]+.*20.*6\[ \t\n\r\]+.*22.*7\[ \t\n\r\]+.*24.*8\[ \t\n\r\]+.*26.*9\[ \t\n\r\]+.*28.*10\[ \t\n\r\]+.*$gdb_prompt $" { 272# pass "print print_array_rep(linked_list1, linked_list2, linked_list3)" 273# } 274# -re ".*$gdb_prompt $" { fail "print print_array_rep(linked_list1, linked_list2, linked_list3)" } 275# timeout { fail "(timeout) print print_array_rep(linked_list1, linked_list2, linked_list3)" } 276#} 277 278 279#go -until 1281 280gdb_test "tbreak 1281" \ 281 "Temporary breakpoint.* file .*call-ar-st.c, line 1281.*" \ 282 "tbreakpoint line 1281" 283 284if ![gdb_skip_stdio_test "continuing to 1281"] { 285 gdb_test "continue" \ 286 "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1281.*c = 0.*" \ 287 "continue to 1281" 288} else { 289 gdb_test "continue" ".*" "" 290} 291 292#call print_small_structs(*struct1, *struct2, *struct3, *struct4, 293# *flags, *flags_combo, *three_char, *five_char, 294# *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3) 295 296if {![gdb_skip_float_test "print print_small_structs(...)"] && \ 297 ![gdb_skip_stdio_test "print print_small_structs(...)"] } { 298 gdb_test_sequence "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" "print print_small_structs" { 299 "\[\t\r\n \]+alpha" 300 "\[\t\r\n \]+gamma" 301 "\[\t\r\n \]+epsilon" 302 "\[\t\r\n \]+alpha" 303 "\[\t\r\n \]+gamma" 304 "\[\t\r\n \]+epsilon" 305 "\[\t\r\n \]+ch1: y[ \t]*ch2: n" 306 "\[\t\r\n \]+Contents of three_char_t:" 307 "\[\t\r\n \]+a[ \t]*b[ \t]*c" 308 "\[\t\r\n \]+Contents of five_char_t:" 309 "\[\t\r\n \]+l[ \t]*m[ \t]*n[ \t]*o[ \t]*p" 310 "\[\t\r\n \]+Contents of int_char_combo_t:" 311 "\[\t\r\n \]+123[ \t]*z" 312 "\[\t\r\n \]+Sum of the 4 struct values and seed :" 313 "\[\t\r\n \]+52" 314 "\[\t\r\n \]+Contents of struct1:" 315 "\[\t\r\n \]+6[ \t]*0" 316 "\[\t\r\n \]+Contents of struct2:" 317 "\[\t\r\n \]+10[ \t]*0" 318 "\[\t\r\n \]+Contents of struct3:" 319 "\[\t\r\n \]+12[ \t]*0" 320 "\[\t\r\n \]+Contents of one_double_t:" 321 "\[\t\r\n \]+10.500000" 322 "\[\t\r\n \]+Contents of one_double_t:" 323 "\[\t\r\n \]+-3.375000" 324 "\[\t\r\n \]+Contents of one_double_t:" 325 "\[\t\r\n \]+675.093750" 326 "\[\t\r\n \]+Contents of two_floats_t:" 327 "\[\t\r\n \]+45.234001[ \t]*43.599998" 328 "\[\t\r\n \]+Contents of two_floats_t:" 329 "\[\t\r\n \]+78.010002[ \t]*122.099998" 330 "\[\t\r\n \]+Contents of two_floats_t:" 331 "\[\t\r\n \]+-1232.344971[ \t]*-199.210007" 332 } 333} 334 335#call compute_with_small_structs(20) 336gdb_test "print compute_with_small_structs(20)" \ 337 "\[0-9\]+ = void" \ 338 "print compute_with_small_structs(20)" 339 340 341#call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 342# 3.14, -5678.12345, -0.11111111, 216.97065) 343 344if {![gdb_skip_float_test "print print_ten_doubles(...)"] && \ 345 ![gdb_skip_stdio_test "print print_ten_doubles(...)"]} { 346 gdb_test_sequence "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)" "print print_ten_doubles" { 347 "\[\t\r\n \]+Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*" 348 "\[\t\r\n \]+Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*" 349 "\[\t\r\n \]+Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*" 350 "\[\t\r\n \]+Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*" 351 "\[\t\r\n \]+Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*" 352 } 353} 354 355#go -until 1286 356gdb_test "tbreak 1286" \ 357 "Temporary breakpoint .* file .*call-ar-st.c, line 1286.*" \ 358 "tbreakpoint line 1286" 359 360gdb_test continue "Continuing\\..*main \\(.*\\) at.*call-ar-st.c:1286\[\t\r\n \]+1286.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to 1286" 361 362if { [istarget "hppa*-*-hpux*"] } { 363 # 364 # NOTE:(FIXME) 365 # the aCC demangler cannot demangle the name of a function with >10 args. 366 # so I added a .* after the name of the function, to match the 367 # incredibly long mangled name 368 # (getting aCC's libdemangle.a bundled w/ the system?) 369 # DTS CLLbs16994 coulter 990114 370 # 371 # FIXME: use step for hppa* testing for now 372 # guo 990621 373 # 374 gdb_test "step" \ 375 "print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);" \ 376 "step into print_long_arg_list" 377} else { 378 379 # We can't just assume that a "step" will get us into 380 # print_long_arg_list here,either. 381 gdb_test "tbreak print_long_arg_list" \ 382 "Temporary breakpoint .* file .*call-ar-st.c, line .*" \ 383 "tbreak in print_long_arg_list after stepping into memcpy" 384 # The short match case below handles cases where a buffer 385 # overflows or something, and expect can't deal with the full 386 # line. Perhaps a more elegant solution exists... -sts 1999-08-17 387 if {![gdb_skip_float_test "step into print_long_arg_list"]} { 388 gdb_test_multiple "continue" "step into print_long_arg_list" { 389 -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" { 390 pass "step into print_long_arg_list" 391 } 392 -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" { 393 pass "step into print_long_arg_list (short match)" 394 } 395 } 396 } else { 397 # If skipping float tests, don't expect anything in arg list. 398 gdb_test "continue" \ 399 "print_long_arg_list \\(.*\\).*" \ 400 "step into print_long_arg_list" 401 } 402} 403 404set ws "\[\n\r\t \]+" 405 406#call print_small_structs(struct1, struct2, struct3, struct4, flags, 407# flags_combo, three_char, five_char, int_char_combo, 408# d1, d2, d3, f1, f2, f3) 409 410if {![gdb_skip_float_test "print_small_structs from print_long_arg_list"] && \ 411 ![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } { 412 413 # On 32-bit SPARC, some of the args are passed by ref, others by 414 # value, and GDB gets confused and says "Invalid cast" because it 415 # thinks it has to cast the structure into a pointer to structure. 416 if { [test_debug_format "stabs"] } then { 417 setup_kfail "gdb/1539" "sparc-*-*" 418 } 419 420 gdb_test_sequence "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)" "print print_small_structs from print_long_arg_list" { 421 "\[\t\r\n \]+alpha" 422 "\[\t\r\n \]+gamma" 423 "\[\t\r\n \]+epsilon" 424 "\[\t\r\n \]+alpha" 425 "\[\t\r\n \]+gamma" 426 "\[\t\r\n \]+epsilon" 427 "\[\t\r\n \]+ch1: y[ \t]*ch2: n" 428 "\[\t\r\n \]+Contents of three_char_t:" 429 "\[\t\r\n \]+a\[ \t\]*b\[ \t\]*c" 430 "\[\t\r\n \]+Contents of five_char_t:" 431 "\[\t\r\n \]+l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p" 432 "\[\t\r\n \]+Contents of int_char_combo_t:" 433 "\[\t\r\n \]+123\[ \t\]*z" 434 "\[\t\r\n \]+Sum of the 4 struct values and seed :" 435 "\[\t\r\n \]+52" 436 "\[\t\r\n \]+Contents of struct1:" 437 "\[\t\r\n \]+6\[ \t\]*0" 438 "\[\t\r\n \]+Contents of struct2:" 439 "\[\t\r\n \]+10\[ \t\]*0" 440 "\[\t\r\n \]+Contents of struct3:" 441 "\[\t\r\n \]+12\[ \t\]*0" 442 "\[\t\r\n \]+Contents of one_double_t:" 443 "\[\t\r\n \]+10.500000" 444 "\[\t\r\n \]+Contents of one_double_t:" 445 "\[\t\r\n \]+-3.375000" 446 "\[\t\r\n \]+Contents of one_double_t:" 447 "\[\t\r\n \]+675.093750" 448 "\[\t\r\n \]+Contents of two_floats_t:" 449 "\[\t\r\n \]+45.234001\[ \t\]*43.599998" 450 "\[\t\r\n \]+Contents of two_floats_t:" 451 "\[\t\r\n \]+78.010002\[ \t\]*122.099998" 452 "\[\t\r\n \]+Contents of two_floats_t:" 453 "\[\t\r\n \]+-1232.344971\[ \t\]*-199.210007" 454 } 455} 456 457 458#go -until 1300 459gdb_test "tbreak 1300" \ 460 "Temporary breakpoint.* file .*call-ar-st.c, line 1300.*" \ 461 "tbreakpoint line 1300" 462 463if ![gdb_skip_stdio_test "continuing to 1300"] { 464 gdb_test "continue" "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*call-ar-st.c:1300.*1300.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \ 465 "continue to 1300" 466} else { 467 gdb_test "continue" ".*" "" 468} 469 470#step 471gdb_test "step" \ 472 "init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*call-ar-st.c:416\[ \t\n\r\]+416.*bit_flags_combo->alpha = a;" \ 473 "step into init_bit_flags_combo" 474 475#call print_bit_flags_combo(*bit_flags_combo) 476if ![gdb_skip_stdio_test "continuing to 1300"] { 477 gdb_test "print print_bit_flags_combo(*bit_flags_combo)" \ 478 "alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*" \ 479 "print print_bit_flags_combo from init_bit_flags_combo" 480} 481 482 483#go -until 1305 484gdb_test "tbreak 1305" \ 485 "Temporary breakpoint.* file .*call-ar-st.c, line 1305.*" \ 486 "tbreakpoint line 1305" 487 488gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1305\[\r\n\t \]+1305.*init_int_char_combo\\(int_char_combo, 13, .!.\\);" \ 489"continue to 1305" 490 491#call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3) 492 493# FIXME: 494# HP aCC demangler currently does not handle hp aCC functions with >10 args 495# DTS CLLbs16994 coulter 990114 496 497if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994} 498 499if {![gdb_skip_float_test "print print_long_arg_list"] && \ 500 ![gdb_skip_stdio_test "print print_long_arg_list"] } { 501 gdb_test_sequence "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" "print print_long_arg_list" { 502 "\[ \n\r\t\]+double : 22.250000" 503 "\[ \n\r\t\]+double : 33.375000" 504 "\[ \n\r\t\]+int : 0" 505 "\[ \n\r\t\]+int : -25" 506 "\[ \n\r\t\]+int : 100" 507 "\[ \n\r\t\]+int : 2345" 508 "\[ \n\r\t\]+alpha" 509 "\[ \n\r\t\]+gamma" 510 "\[ \n\r\t\]+epsilon" 511 "\[ \n\r\t\]+ch1: y\[ \t\]+ch2: n" 512 "\[ \n\r\t\]+Contents of three_char_t:" 513 "\[ \n\r\t\]+x\[ \t\]+y\[ \t\]+z" 514 "\[ \n\r\t\]+Contents of five_char_t:" 515 "\[ \n\r\t\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o" 516 "\[ \n\r\t\]+Contents of int_char_combo_t:" 517 "\[ \n\r\t\]+123\[ \t\]+z" 518 "\[ \n\r\t\]+Sum of the 4 struct values and seed :" 519 "\[ \n\r\t\]+52" 520 "\[ \n\r\t\]+Contents of struct1:" 521 "\[ \n\r\t\]+6\[ \t\]+0" 522 "\[ \n\r\t\]+Contents of struct2:" 523 "\[ \n\r\t\]+10\[ \t\]+0" 524 "\[ \n\r\t\]+Contents of struct3:" 525 "\[ \n\r\t\]+12\[ \t\]+0" 526 "\[ \n\r\t\]+Contents of one_double_t:" 527 "\[ \n\r\t\]+1.111110" 528 "\[ \n\r\t\]+Contents of one_double_t:" 529 "\[ \n\r\t\]+-345.340000" 530 "\[ \n\r\t\]+Contents of one_double_t:" 531 "\[ \n\r\t\]+546464.200000" 532 "\[ \n\r\t\]+Contents of two_floats_t:" 533 "\[ \n\r\t\]+0.234000\[ \t\]+453.100006" 534 "\[ \n\r\t\]+Contents of two_floats_t:" 535 "\[ \n\r\t\]+78.345001\[ \t\]+23.090000" 536 "\[ \n\r\t\]+Contents of two_floats_t:" 537 "\[ \n\r\t\]+-2.345000\[ \t\]+1.000000" 538 } 539} 540 541 542#go -until 1311 543gdb_test "tbreak 1311" \ 544 "Temporary breakpoint.* file .*call-ar-st.c, line 1311.*" \ 545 "tbreakpoint line 1311" 546 547gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1311\[ \t\n\r\]+1311.*compute_with_small_structs\\(35\\);" \ 548"continue to 1311" 549 550 551#call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4) 552if ![gdb_skip_stdio_test "print sum_struct_print(...)"] { 553 gdb_test "print sum_struct_print(10,*struct1,*struct2,*struct3,*struct4)" \ 554 "Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*" \ 555 "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" 556} 557 558 559#call print_struct_rep(*struct1, *struct2, *struct3) 560if ![gdb_skip_stdio_test "print print_struct_rep(...)"] { 561 gdb_test_sequence "print print_struct_rep(*struct1, *struct2, *struct3)" \ 562 "print print_struct_rep(*struct1, *struct2, *struct3)" { 563 "\[ \t\n\r\]+Contents of struct1:" 564 "\[ \t\n\r\]+ 22 0" 565 "\[ \t\n\r\]+Contents of struct2:" 566 "\[ \t\n\r\]+ 42 0" 567 "\[ \t\n\r\]+Contents of struct3:" 568 "\[ \t\n\r\]+ 62 0" 569 } 570} 571 572if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] { 573 gdb_test "print print_one_large_struct(*list1)" \ 574 " 4 1.*" \ 575 "print print_one_large_struct(*list1)" 576} 577 578set timeout $oldtimeout 579return 580 581