1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim 105# (Bram@vim.org). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installtutorbin only installs the Vim tutor program 134# make installtutor only installs the Vim tutor files 135# make installspell only installs the spell files 136# make installtools only installs xxd 137# If you install Vim, not to install for real but to prepare a package 138# or RPM, set DESTDIR to the root of the tree. 139# 140# 6. Use Vim until a new version comes out. {{{1 141# 142# 7. "make uninstall_runtime" {{{1 143# Will remove the runtime files for the current version. This is safe 144# to use while another version is being used, only version-specific 145# files will be deleted. 146# To remove the runtime files of another version: 147# make uninstall_runtime VIMRTDIR=/vim54 148# If you want to delete all installed files, use: 149# make uninstall 150# Note that this will delete files that have the same name for any 151# version, thus you might need to do a "make install" soon after this. 152# Be careful not to remove a version of Vim that is still being used! 153# To find out which files and directories will be deleted, use: 154# make -n uninstall 155# }}} 156# 157### This Makefile has been successfully tested on many systems. {{{ 158### Only the ones that require special options are mentioned here. 159### Check the (*) column for remarks, listed below. 160### Later code changes may cause small problems, otherwise Vim is supposed to 161### compile and run without problems. 162 163#system: configurations: version (*) tested by: 164#------------- ------------------------ ------- - ---------- 165#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 166#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 167#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 168#AIX 4.2.1 cc 5.2k (C) Will Fiveash 169#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 170#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 171#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 172#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 173#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 174#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 175#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 176#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 177#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 178#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 179#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 180#Irix 6.4 cc ? 5.0m (S) Rick Sayre 181#Irix 6.5 cc ? 6.0 (S) David Harrison 182#Irix 64 bit 4.5 (K) Jon Wright 183#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 184#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 185#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 186#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 188#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 189#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 190#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 191#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 192#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 193#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 194#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 195#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 197#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 198#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 199#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 200#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 201#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 202#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 203#Solaris 2.6 gcc 2.8.1 ncursus 5.3 (G) Larry W. Virden 204#Solaris with -lthread 5.5 (W) K. Nagano 205#Solaris gcc (b) Riccardo 206#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 207#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 208#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 209#Tandem/NSK (c) Matthew Woehlke 210#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 211#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 212#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 213# }}} 214 215# (*) Remarks: {{{ 216# 217# (1) Uncomment line below for shlicc2 218# (2) HPUX with compile problems or wrong digraphs, uncomment line below 219# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 220# And add "-lXpm" to MOTIF_LIBS2. 221# (4) For cc the optimizer must be disabled (use CFLAGS= after running 222# configure) (symptom: ":set termcap" output looks weird). 223# (5) Compiler may need extra argument, see below. 224# (6) See below for a few lines to uncomment 225# (7) See below for lines which enable the use of clcc 226# (8) Needs some EXTRA_LIBS, search for Unisys below 227# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 228# (A) May need EXTRA_LIBS, see below 229# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 230# (C) Force the use of curses instead of termcap, see below. 231# (D) Uncomment lines below for QNX 232# (E) You might want to use termlib instead of termcap, see below. 233# (F) See below for instructions. 234# (G) Using ncursus version 4.2 has reported to cause a crash. Use the 235# Sun cursus library instead. 236# (H) See line for EXTRA_LIBS below. 237# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 238# (J) If you get undefined symbols, see below for a solution. 239# (K) See lines to uncomment below for machines with 64 bit pointers. 240# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 241# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 242# characters instead of one). 243# (N) SCO with decmouse. 244# (O) LynxOS needs EXTRA_LIBS, see below. 245# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 246# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 247# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 248# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 249# (T) See ../doc/os_beos.txt. 250# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 251# detection, since the configure script runs into an error when it 252# detects Python (probably because of the bash shell). 253# (V) See lines to uncomment below. 254# (X) Need to use the .include "auto/config.mk" line below 255# (Y) See line with c89 below 256# (Z) See lines with cc or c89 below 257# (a) See line with EXTRA_LIBS below. 258# (b) When using gcc with the Solaris linker, make sure you don't use GNU 259# strip, otherwise the binary may not run: "Cannot find ELF". 260# (c) Add -lfloss to EXTRA_LIBS, see below. 261# (x) When you get warnings for precompiled header files, run 262# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 263# }}} 264 265 266#DO NOT CHANGE the next line, we need it for configure to find the compiler 267#instead of using the default from the "make" program. 268#Use a line further down to change the value for CC. 269CC= 270 271# Change and use these defines if configure cannot find your Motif stuff. 272# Unfortunately there is no "standard" location for Motif. {{{ 273# These defines can contain a single directory (recommended) or a list of 274# directories (for when you are working with several systems). The LAST 275# directory that exists is used. 276# When changed, run "make reconfig" next! 277#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 278#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 279### Use these two lines for Infomagic Motif (3) 280#GUI_INC_LOC = -I/usr/X11R6/include 281#GUI_LIB_LOC = -L/usr/X11R6/lib 282# }}} 283 284######################## auto/config.mk ######################## {{{1 285# At this position auto/config.mk is included. When starting from the 286# distribution it is almost empty. After running auto/configure it contains 287# settings that have been discovered for your system. Settings below this 288# include override settings in auto/config.mk! 289 290# Note: if auto/config.mk is lost somehow (e.g., because configure was 291# interrupted), create an empty auto/config.mk file and do "make config". 292 293# (X) How to include auto/config.mk depends on the version of "make" you have, 294# if the current choice doesn't work, try the other one. 295 296include auto/config.mk 297#.include "auto/config.mk" 298CClink = $(CC) 299 300#}}} 301 302# Include the configuration choices first, so we can override everything 303# below. As shipped, this file contains a target that causes to run 304# configure. Once configure was run, this file contains a list of 305# make variables with predefined values instead. Thus any second invocation 306# of make, will build Vim. 307 308# CONFIGURE - configure arguments {{{1 309# You can give a lot of options to configure. 310# Change this to your desire and do 'make config' afterwards 311 312# examples (can only use one!): 313#CONF_ARGS = --exec-prefix=/usr 314#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7 315#CONF_ARGS = --with-global-runtime=/etc/vim 316#CONF_ARGS = --with-local-dir=/usr/share 317#CONF_ARGS = --without-local-dir 318 319# Use this one if you distribute a modified version of Vim. 320#CONF_ARGS = --with-modified-by="John Doe" 321 322# GUI - For creating Vim with GUI (gvim) (B) 323# Uncomment this line when you don't want to get the GUI version, although you 324# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 325# at all. 326#CONF_OPT_GUI = --disable-gui 327 328# Uncomment one of these lines if you have that GUI but don't want to use it. 329# The automatic check will use another one that can be found. 330# Gnome is disabled by default, it may cause trouble. 331#CONF_OPT_GUI = --disable-gtk2-check 332#CONF_OPT_GUI = --enable-gnome2-check 333#CONF_OPT_GUI = --disable-motif-check 334#CONF_OPT_GUI = --disable-athena-check 335#CONF_OPT_GUI = --disable-nextaw-check 336 337# Uncomment one of these lines to select a specific GUI to use. 338# When using "yes" or nothing, configure will use the first one found: GTK+, 339# Motif or Athena. 340# 341# GTK versions that are known not to work 100% are rejected. 342# Use "--disable-gtktest" to accept them anyway. 343# Only GTK 2 is supported, for GTK 1 use Vim 7.2. 344# 345# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 346# is used then GNOME will automatically be used if it is found. If you have 347# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 348# --enable-gui=gtk or leave out --enable-gnome-check. 349# 350# If the selected GUI isn't found, the GUI is disabled automatically 351#CONF_OPT_GUI = --enable-gui=gtk2 352#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 353#CONF_OPT_GUI = --enable-gui=gnome2 354#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 355#CONF_OPT_GUI = --enable-gui=motif 356#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 357#CONF_OPT_GUI = --enable-gui=athena 358#CONF_OPT_GUI = --enable-gui=nextaw 359 360# Carbon GUI for Mac OS X 361#CONF_OPT_GUI = --enable-gui=carbon 362 363# DARWIN - detecting Mac OS X 364# Uncomment this line when you want to compile a Unix version of Vim on 365# Darwin. None of the Mac specific options or files will be used. 366#CONF_OPT_DARWIN = --disable-darwin 367 368# Select the architecture supported. Default is to build for the current 369# platform. Use "both" for a universal binary. That probably doesn't work 370# when including Perl, Python, etc. 371#CONF_OPT_DARWIN = --with-mac-arch=i386 372#CONF_OPT_DARWIN = --with-mac-arch=ppc 373#CONF_OPT_DARWIN = --with-mac-arch=both 374 375# LUA 376# Uncomment one of these when you want to include the Lua interface. 377# First one is for static linking, second one for dynamic loading. 378#CONF_OPT_LUA = --enable-luainterp 379#CONF_OPT_LUA = --enable-luainterp=dynamic 380# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 381#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 382 383# MZSCHEME 384# Uncomment this when you want to include the MzScheme interface. 385#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 386# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 387#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 388#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 389#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 390 391# PERL 392# Uncomment one of these when you want to include the Perl interface. 393# First one is for static linking, second one for dynamic loading. 394# The Perl option sometimes causes problems, because it adds extra flags 395# 396# to the command line. If you see strange flags during compilation, check in 397# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 398# the next line. 399# When you get an error for a missing "perl.exp" file, try creating an emtpy 400# one: "touch perl.exp". 401# This requires at least "small" features, "tiny" doesn't work. 402#CONF_OPT_PERL = --enable-perlinterp 403#CONF_OPT_PERL = --enable-perlinterp=dynamic 404 405# PYTHON 406# Uncomment this when you want to include the Python interface. 407# NOTE: This may cause threading to be enabled, which has side effects (such 408# as using different libraries and debugging becomes more difficult). 409# NOTE: Using this together with Perl may cause a crash in initialization. 410# For Python3 support make a symbolic link in /usr/local/bin: 411# ln -s python3 python3.1 412# If both python2.x and python3.x are enabled then the linking will be via 413# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 414# However, this may still cause problems, such as "import termios" failing. 415# Build two separate versions of Vim in that case. 416#CONF_OPT_PYTHON = --enable-pythoninterp 417#CONF_OPT_PYTHON3 = --enable-python3interp 418 419# RUBY 420# Uncomment this when you want to include the Ruby interface. 421# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 422#CONF_OPT_RUBY = --enable-rubyinterp 423#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 424 425# TCL 426# Uncomment this when you want to include the Tcl interface. 427#CONF_OPT_TCL = --enable-tclinterp 428#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 429 430# CSCOPE 431# Uncomment this when you want to include the Cscope interface. 432#CONF_OPT_CSCOPE = --enable-cscope 433 434# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 435#CONF_OPT_WORKSHOP = --enable-workshop 436 437# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 438# Motif version must have XPM libraries (see |workshop-xpm|). 439# Uncomment this when you do not want the netbeans interface. 440#CONF_OPT_NETBEANS = --disable-netbeans 441 442# SNIFF - Include support for SNiFF+. 443#CONF_OPT_SNIFF = --enable-sniff 444 445# MULTIBYTE - To edit multi-byte characters. 446# Uncomment this when you want to edit a multibyte language. 447# It's automatically enabled with big features or IME support. 448# Note: Compile on a machine where setlocale() actually works, otherwise the 449# configure tests may fail. 450#CONF_OPT_MULTIBYTE = --enable-multibyte 451 452# NLS - National Language Support 453# Uncomment this when you do not want to support translated messages, even 454# though configure can find support for it. 455#CONF_OPT_NLS = --disable-nls 456 457# XIM - X Input Method. Special character input support for X11 (Chinese, 458# Japanese, special symbols, etc). Also needed for dead-key support. 459# When omitted it's automatically enabled for the X-windows GUI. 460# HANGUL - Input Hangul (Korean) language using internal routines. 461# Uncomment one of these when you want to input a multibyte language. 462#CONF_OPT_INPUT = --enable-xim 463#CONF_OPT_INPUT = --disable-xim 464#CONF_OPT_INPUT = --enable-hangulinput 465 466# FONTSET - X fontset support for output of languages with many characters. 467# Uncomment this when you want to output a multibyte language. 468#CONF_OPT_OUTPUT = --enable-fontset 469 470# ACL - Uncomment this when you do not want to include ACL support, even 471# though your system does support it. E.g., when it's buggy. 472#CONF_OPT_ACL = --disable-acl 473 474# gpm - For mouse support on Linux console via gpm 475# Uncomment this when you do not want to include gpm support, even 476# though you have gpm libraries and includes. 477#CONF_OPT_GPM = --disable-gpm 478 479# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 480# Uncomment this when you do not want do include sysmouse support, even 481# though you have /dev/sysmouse and includes. 482#CONF_OPT_SYSMOUSE = --disable-sysmouse 483 484# FEATURES - For creating Vim with more or less features 485# Uncomment one of these lines when you want to include few to many features. 486# The default is "normal". 487#CONF_OPT_FEAT = --with-features=tiny 488#CONF_OPT_FEAT = --with-features=small 489#CONF_OPT_FEAT = --with-features=normal 490#CONF_OPT_FEAT = --with-features=big 491#CONF_OPT_FEAT = --with-features=huge 492 493# COMPILED BY - For including a specific e-mail address for ":version". 494#CONF_OPT_COMPBY = "--with-compiledby=John Doe <JohnDoe@yahoo.com>" 495 496# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 497# (otherwise Vim configure will try to include xterm titlebar access) 498# Also disable the GUI above, otherwise it will be included anyway. 499# When both GUI and X11 have been disabled this may save about 15% of the 500# code and make Vim startup quicker. 501#CONF_OPT_X = --without-x 502 503# X WINDOWS DIRECTORY - specify X directories 504# If configure can't find you X stuff, or if you have multiple X11 derivatives 505# installed, you may wish to specify which one to use. 506# Select nothing to let configure choose. 507# This here selects openwin (as found on sun). 508#XROOT = /usr/openwin 509#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 510 511# X11 Session Management Protocol support 512# Vim will try to use XSMP to catch the user logging out if there are unsaved 513# files. Uncomment this line to disable that (it prevents vim trying to open 514# communications with the session manager). 515#CONF_OPT_XSMP = --disable-xsmp 516 517# You may wish to include xsmp but use exclude xsmp-interact if the logout 518# XSMP functionality does not work well with your session-manager (at time of 519# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 520# applications after Vim has cancelled a logout (until Vim quits). This 521# *might* be the Vim code, but is more likely a bug in early GNOME-1. 522# This disables the dialog that asks you if you want to save files or not. 523#CONF_OPT_XSMP = --disable-xsmp-interact 524 525# COMPILER - Name of the compiler {{{1 526# The default from configure will mostly be fine, no need to change this, just 527# an example. If a compiler is defined here, configure will use it rather than 528# probing for one. It is dangerous to change this after configure was run. 529# Make will use your choice then -- but beware: Many things may change with 530# another compiler. It is wise to run 'make reconfig' to start all over 531# again. 532#CC = cc 533#CC = gcc 534 535# COMPILER FLAGS - change as you please. Either before running {{{1 536# configure or afterwards. For examples see below. 537# When using -g with some older versions of Linux you might get a 538# statically linked executable. 539# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 540#CFLAGS = -g 541#CFLAGS = -O 542 543# Optimization limits - depends on the compiler. Automatic check in configure 544# doesn't work very well, because many compilers only give a warning for 545# unrecognized arguments. 546#CFLAGS = -O -OPT:Olimit=2600 547#CFLAGS = -O -Olimit 2000 548#CFLAGS = -O -FOlimit,2000 549 550# Often used for GCC: mixed optimizing, lot of optimizing, debugging 551#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 552#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 553#CFLAGS = -g -Wall -Wmissing-prototypes 554#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 555#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 556#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 557 558# Use this with GCC to check for mistakes, unused arguments, etc. 559#CFLAGS = -g -Wall -Wextra -Wmissing-prototypes -Wunreachable-code -D_FORTIFY_SOURCE=1 -DU_DEBUG 560#CFLAGS = -g -O2 -Wall -Wextra -Wmissing-prototypes -D_FORTIFY_SOURCE=1 -DU_DEBUG 561#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 562#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 563 564# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 565# allocated memory (and makes every malloc()/free() very slow). 566# Electric Fence is free (search ftp sites). 567# You may want to set the EF_PROTECT_BELOW environment variable to check the 568# other side of allocated memory. 569# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 570# as root: sysctl -w vm.max_proc_mmap=30000 571#EXTRA_LIBS = /usr/local/lib/libefence.a 572 573# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 574#PURIFY = purify 575 576# NBDEBUG - debugging the netbeans interface. 577#EXTRA_DEFS = -DNBDEBUG 578 579# }}} 580 581# LINT - for running lint 582# For standard Unix lint 583LINT = lint 584LINT_OPTIONS = -beprxzF 585# For splint 586# It doesn't work well, crashes on include files and non-ascii characters. 587#LINT = splint 588#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 589 590# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 591# Might not work with GUI or Perl. 592# For unknown reasons adding "-lc" fixes a linking problem with GCC. That's 593# probably a bug in the "-pg" implementation. 594# Need to recompile everything after changing this: "make clean" "make". 595#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 596#PROFILE_LIBS = -pg 597#PROFILE_LIBS = -pg -lc 598 599# MEMORY LEAK DETECTION 600# Requires installing the ccmalloc library. 601# Configuration is in the .ccmalloc or ~/.ccmalloc file. 602# Doesn't work very well, since memory linked to from global variables 603# (in libraries) is also marked as leaked memory. 604#PROFILE_CFLAGS = -DEXITFREE 605#PROFILE_LIBS = -lccmalloc 606 607##################################################### 608### Specific systems, check if yours is listed! ### {{{ 609##################################################### 610 611### Uncomment things here only if the values chosen by configure are wrong. 612### It's better to adjust configure.in and "make autoconf", if you can! 613### Then send the required changes to configure.in to the bugs list. 614 615### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 616### 617#CC = shlicc2 618#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 619 620### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 621### The first probably works on all systems 622### The second should work a bit better on newer systems 623### The third should work a bit better on HPUX 11.11 624### Information provided by: Richard Allen <ra@rhi.hi.is> 625#CC = c89 -D_HPUX_SOURCE 626#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 627#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 628 629### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 630### when the default (ISO) digraphs look completely wrong. 631### After changing this do "touch digraph.c; make". 632#EXTRA_DEFS = -DHPUX_DIGRAPHS 633 634### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 635### is too small to compile many routines. It produces too much defining 636### and no space errors. 637### Uncomment the following to specify a larger macro definition table. 638#CFLAGS = -Wp,-H256000 639 640### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 641### libraries in /usr/lib instead of /lib (avoiding transition links). 642### Information provided by: David Green 643#XROOT = /usr 644#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 645#GUI_INC_LOC = -I/usr/include/Motif1.2 646#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 647 648### (5) AIX 4.1.4 with cc 649#CFLAGS = -O -qmaxmem=8192 650 651### AIX with c89 (Walter Briscoe) 652#CC = c89 653#CPPFLAGS = -D_ALL_SOURCE 654 655### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 656# needed to avoid a problem where strings.h gets included 657#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 658 659### (W) Solaris with multi-threaded libraries (-lthread): 660### If suspending doesn't work properly, try using this line: 661#EXTRA_DEFS = -D_REENTRANT 662 663### (7) Solaris 2.4/2.5 with Centerline compiler 664#CC = clcc 665#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 666#CFLAGS = -O 667 668### (9) Solaris 2.x with cc (SunPro), using Athena. 669### Only required for compiling gui_at_sb.c. 670### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 671### Use one of the lines (either Full ANSI or no ANSI at all) 672#CFLAGS = $(CFLAGS) -Xc 673#CFLAGS = $(CFLAGS) -Xs 674 675### Solaris 2.3 with X11 and specific cc 676#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 677 678### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 679#CC = /usr/ucb/cc 680#EXTRA_LIBS = -R/usr/ucblib 681 682### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 683# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 684#CC = cc 685#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 686#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 687#XPM_IPATH = -I$(XPM_DIR)/include 688#EXTRA_LIBS = $(XPM_LIB) 689#EXTRA_IPATHS = $(XPM_IPATH) 690#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 691 692### Solaris with workshop compilers: Vim is unstable when compiled with 693# "-fast". Use this instead. (Shea Martin) 694#CFLAGS = -x02 -xtarget=ultra 695 696### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 697#LDFLAGS = -lw -ldl -lXmu 698#GUI_LIB_LOC = -L/usr/local/lib 699 700### (8) Unisys 6035 (Glauber Ribeiro) 701#EXTRA_LIBS = -lnsl -lsocket -lgen 702 703### When builtin functions cause problems with gcc (for Sun 4.1.x) 704#CFLAGS = -O2 -Wall -traditional -Wno-implicit 705 706### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 707#EXTRA_DEFS = -DDOMAIN 708#CFLAGS= -O -A systype,bsd4.3 709 710### Coherent 4.2.10 on Intel 386 platform 711#EXTRA_DEFS = -Dvoid=int 712#EXTRA_LIBS = -lterm -lsocket 713 714### SCO 3.2, with different library name for terminfo 715#EXTRA_LIBS = -ltinfo 716 717### UTS2 for Amdahl UTS 2.1.x 718#EXTRA_DEFS = -DUTS2 719#EXTRA_LIBS = -lsocket 720 721### UTS4 for Amdahl UTS 4.x 722#EXTRA_DEFS = -DUTS4 -Xa 723 724### USL for Unix Systems Laboratories (SYSV 4.2) 725#EXTRA_DEFS = -DUSL 726 727### RISCos on MIPS without X11 728#EXTRA_DEFS = -DMIPS 729 730### RISCos on MIPS with X11 731#EXTRA_LIBS = -lsun 732 733### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 734#CC= gcc -D_POSIX_SOURCE 735#CFLAGS= -O2 736#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 737 738### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 739### Also use the CONF_TERM_LIB below! 740#EXTRA_LIBS = -lgen 741 742### (D) QNX (by G.F. Desrochers) 743#CFLAGS = -g -O -mf -4 744 745### (F) QNX (by John Oleynick) 746# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 747# CONF_OPT_X = --without-x. 748# 2. make config 749# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 750# have -ldir (does config find it somewhere?) and -ltermcap has at 751# least one problem so I use termlib.o instead. The problem with 752# termcap is that it segfaults if you call it with the name of 753# a non-existent terminal type. 754# 4. edit auto/config.h and add #define USE_TMPNAM 755# 5. add termlib.o to OBJ 756# 6. make 757 758### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 759#EXTRA_LIBS = -lgen 760 761### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 762#EXTRA_LIBS = -lgen -lnsl 763### For SINIX-Y this is needed for the right prototype of gettimeofday() 764#EXTRA_DEFS = -D_XPG_IV 765 766### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 767# Use both "-F O3" lines for optimization or the "-g" line for debugging 768#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 769#CFLAGS = -F O3 -DSINIXN 770#LDFLAGS = -F O3 771#CFLAGS = -g -DSINIXN 772 773### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 774#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 775#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 776 777### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 778#GUI_INC_LOC = -I/usr/include 779#GUI_LIB_LOC = -L/usr/lib 780#EXTRA_LIBS = -lgen 781 782### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 783#GUI_INC_LOC = -I/usr/necccs/include 784#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 785#XROOT = /usr/necccs 786#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 787#EXTRA_LIBS = -lsocket -lgen 788 789### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 790# Not needed for Irix 5.3, Ives Aerts reported 791#EXTRA_LIBS = -lmalloc -lc_s 792# Irix 4.0, when regexp and regcmp cannot be found when linking: 793#EXTRA_LIBS = -lmalloc -lc_s -lPW 794 795### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 796# Note: This newer option style is used with the MipsPro compilers ONLY if 797# you are compiling an "n32" or "64" ABI binary (use either a -n32 798# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 799# then the CFLAGS option format will be the typical style (i.e. 800# -Olimit 3000). 801#CFLAGS = -OPT:Olimit=3000 -O 802 803### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 804# compiler features! Beware, the optimization is EXTREMELY thorough 805# and takes quite a long time. 806# Note: See the note above. Here, the -mips3 option automatically 807# enables either the "n32" or "64" ABI, depending on what machine you 808# are compiling on (n32 is explicitly enabled here, just to make sure). 809#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 810#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 811 812### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 813### Suggested by Jon Wright <jon@gate.sinica.edu.tw>. 814### Tested on R8000 IRIX6.1 Power Indigo2. 815### Check /etc/compiler.defaults for your compiler settings. 816# either (for 64 bit pointers) uncomment the following line 817#GUI_LIB_LOC = -L/usr/lib64 818# then 819# 1) make config 820# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 821# 3) make 822# 823# or (for 32bit pointers) uncomment the following line 824#EXTRA_DEFS = -n32 825#GUI_LIB_LOC = -L/usr/lib32 826# then 827# 1) make config 828# 2) edit auto/config.mk, add -n32 to LDFLAGS 829# 3) make 830# 831#Alternatively: use -o32 instead of -n32. 832### 833 834### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 835### which is found by configure, doesn't work correctly. Symptom is the 836### error message "Termcap entry too long". Uncomment the next line. 837### On AIX 4.2.1 (and other versions probably), libtermcap is reported 838### not to display properly. 839### after changing this, you need to do "make reconfig". 840#CONF_TERM_LIB = --with-tlib=curses 841 842### (E) If you want to use termlib library instead of the automatically found 843### one. After changing this, you need to do "make reconfig". 844#CONF_TERM_LIB = --with-tlib=termlib 845 846### (a) ESIX V4.2 (Reinhard Wobst) 847#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 848 849### (c) Tandem/NSK (Matthew Woehlke) 850#EXTRA_LIBS = -lfloss 851 852### If you want to use ncurses library instead of the automatically found one 853### after changing this, you need to do "make reconfig". 854#CONF_TERM_LIB = --with-tlib=ncurses 855 856### For GCC on MSDOS, the ".exe" suffix will be added. 857#EXEEXT = .exe 858#LNKEXT = .exe 859 860### (O) For LynxOS 2.5.0, tested on PC. 861#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 862### For LynxOS 3.0.1, tested on PPC 863#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 864### For LynxOS 3.1.0, tested on PC 865#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 866 867 868### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 869### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 870#CFLAGS = -O -Qtarget=m88110compat 871#EXTRA_LIBS = -lgen 872 873##################### end of system specific lines ################### }}} 874 875### Names of the programs and targets {{{1 876VIMTARGET = $(VIMNAME)$(EXEEXT) 877EXTARGET = $(EXNAME)$(LNKEXT) 878VIEWTARGET = $(VIEWNAME)$(LNKEXT) 879GVIMNAME = g$(VIMNAME) 880GVIMTARGET = $(GVIMNAME)$(LNKEXT) 881GVIEWNAME = g$(VIEWNAME) 882GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 883RVIMNAME = r$(VIMNAME) 884RVIMTARGET = $(RVIMNAME)$(LNKEXT) 885RVIEWNAME = r$(VIEWNAME) 886RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 887RGVIMNAME = r$(GVIMNAME) 888RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 889RGVIEWNAME = r$(GVIEWNAME) 890RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 891VIMDIFFNAME = $(VIMNAME)diff 892GVIMDIFFNAME = g$(VIMDIFFNAME) 893VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 894GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 895EVIMNAME = e$(VIMNAME) 896EVIMTARGET = $(EVIMNAME)$(LNKEXT) 897EVIEWNAME = e$(VIEWNAME) 898EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 899 900### Names of the tools that are also made {{{1 901TOOLS = xxd/xxd$(EXEEXT) 902 903### Installation directories. The defaults come from configure. {{{1 904# 905### prefix the top directory for the data (default "/usr/local") 906# 907# Uncomment the next line to install Vim in your home directory. 908#prefix = $(HOME) 909 910### exec_prefix is the top directory for the executable (default $(prefix)) 911# 912# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 913#exec_prefix = /usr/machine 914 915### BINDIR dir for the executable (default "$(exec_prefix)/bin") 916### MANDIR dir for the manual pages (default "$(prefix)/man") 917### DATADIR dir for the other files (default "$(prefix)/lib" or 918# "$(prefix)/share") 919# They may be different when using different architectures for the 920# executable and a common directory for the other files. 921# 922# Uncomment the next line to install Vim in "/usr/bin" 923#BINDIR = /usr/bin 924# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 925#MANDIR = /usr/share/man 926# Uncomment the next line to install Vim help files in "/usr/share/vim" 927#DATADIR = /usr/share 928 929### DESTDIR root of the installation tree. This is prepended to the other 930# directories. This directory must exist. 931#DESTDIR = ~/pkg/vim 932 933### Directory of the man pages 934MAN1DIR = /man1 935 936### Vim version (adjusted by a script) 937VIMMAJOR = 7 938VIMMINOR = 3 939 940### Location of Vim files (should not need to be changed, and {{{1 941### some things might not work when they are changed!) 942VIMDIR = /vim 943VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 944HELPSUBDIR = /doc 945COLSUBDIR = /colors 946SYNSUBDIR = /syntax 947INDSUBDIR = /indent 948AUTOSUBDIR = /autoload 949PLUGSUBDIR = /plugin 950FTPLUGSUBDIR = /ftplugin 951LANGSUBDIR = /lang 952COMPSUBDIR = /compiler 953KMAPSUBDIR = /keymap 954MACROSUBDIR = /macros 955TOOLSSUBDIR = /tools 956TUTORSUBDIR = /tutor 957SPELLSUBDIR = /spell 958PRINTSUBDIR = /print 959PODIR = po 960 961### VIMLOC common root of the Vim files (all versions) 962### VIMRTLOC common root of the runtime Vim files (this version) 963### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 964### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 965### HELPSUBLOC location for help files 966### COLSUBLOC location for colorscheme files 967### SYNSUBLOC location for syntax files 968### INDSUBLOC location for indent files 969### AUTOSUBLOC location for standard autoload files 970### PLUGSUBLOC location for standard plugin files 971### FTPLUGSUBLOC location for ftplugin files 972### LANGSUBLOC location for language files 973### COMPSUBLOC location for compiler files 974### KMAPSUBLOC location for keymap files 975### MACROSUBLOC location for macro files 976### TOOLSSUBLOC location for tools files 977### TUTORSUBLOC location for tutor files 978### SPELLSUBLOC location for spell files 979### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 980### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 981### You can override these if you want to install them somewhere else. 982### Edit feature.h for compile-time settings. 983VIMLOC = $(DATADIR)$(VIMDIR) 984VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 985VIMRCLOC = $(VIMLOC) 986HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 987COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 988SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 989INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 990AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 991PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 992FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 993LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 994COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 995KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 996MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 997TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 998TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 999SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 1000PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 1001SCRIPTLOC = $(VIMRTLOC) 1002 1003### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 1004### the runtime directory is not below it. 1005#VIMRUNTIMEDIR = $(VIMRTLOC) 1006 1007### Name of the evim file target. 1008EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1009MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1010 1011### Name of the menu file target. 1012SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1013SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1014SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1015 1016### Name of the bugreport file target. 1017SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1018 1019### Name of the file type detection file target. 1020SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1021 1022### Name of the file type detection file target. 1023SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1024 1025### Name of the file type detection script file target. 1026SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1027 1028### Name of the ftplugin-on file target. 1029SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1030 1031### Name of the ftplugin-off file target. 1032SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1033 1034### Name of the indent-on file target. 1035SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1036 1037### Name of the indent-off file target. 1038SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1039 1040### Name of the option window script file target. 1041SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1042 1043# Program to install the program in the target directory. Could also be "mv". 1044INSTALL_PROG = cp 1045 1046# Program to install the data in the target directory. Cannot be "mv"! 1047INSTALL_DATA = cp 1048INSTALL_DATA_R = cp -r 1049 1050### Program to run on installed binary 1051#STRIP = strip 1052 1053### Permissions for binaries {{{1 1054BINMOD = 755 1055 1056### Permissions for man page 1057MANMOD = 644 1058 1059### Permissions for help files 1060HELPMOD = 644 1061 1062### Permissions for Perl and shell scripts 1063SCRIPTMOD = 755 1064 1065### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1066VIMSCRIPTMOD = 644 1067 1068### Permissions for all directories that are created 1069DIRMOD = 755 1070 1071### Permissions for all other files that are created 1072FILEMOD = 644 1073 1074# Where to copy the man and help files from 1075HELPSOURCE = ../runtime/doc 1076 1077# Where to copy the script files from (menu, bugreport) 1078SCRIPTSOURCE = ../runtime 1079 1080# Where to copy the colorscheme files from 1081COLSOURCE = ../runtime/colors 1082 1083# Where to copy the syntax files from 1084SYNSOURCE = ../runtime/syntax 1085 1086# Where to copy the indent files from 1087INDSOURCE = ../runtime/indent 1088 1089# Where to copy the standard plugin files from 1090AUTOSOURCE = ../runtime/autoload 1091 1092# Where to copy the standard plugin files from 1093PLUGSOURCE = ../runtime/plugin 1094 1095# Where to copy the ftplugin files from 1096FTPLUGSOURCE = ../runtime/ftplugin 1097 1098# Where to copy the macro files from 1099MACROSOURCE = ../runtime/macros 1100 1101# Where to copy the tools files from 1102TOOLSSOURCE = ../runtime/tools 1103 1104# Where to copy the tutor files from 1105TUTORSOURCE = ../runtime/tutor 1106 1107# Where to copy the spell files from 1108SPELLSOURCE = ../runtime/spell 1109 1110# Where to look for language specific files 1111LANGSOURCE = ../runtime/lang 1112 1113# Where to look for compiler files 1114COMPSOURCE = ../runtime/compiler 1115 1116# Where to look for keymap files 1117KMAPSOURCE = ../runtime/keymap 1118 1119# Where to look for print resource files 1120PRINTSOURCE = ../runtime/print 1121 1122# If you are using Linux, you might want to use this to make vim the 1123# default vi editor, it will create a link from vi to Vim when doing 1124# "make install". An existing file will be overwritten! 1125# When not using it, some make programs can't handle an undefined $(LINKIT). 1126#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1127LINKIT = @echo >/dev/null 1128 1129### 1130### GRAPHICAL USER INTERFACE (GUI). {{{1 1131### 'configure --enable-gui' can enable one of these for you if you did set 1132### a corresponding CONF_OPT_GUI above and have X11. 1133### Override configures choice by uncommenting all the following lines. 1134### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1135### for enabling the Athena or Motif GUI. 1136#GUI_SRC = $(NONE_SRC) 1137#GUI_OBJ = $(NONE_OBJ) 1138#GUI_DEFS = $(NONE_DEFS) 1139#GUI_IPATH = $(NONE_IPATH) 1140#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1141#GUI_LIBS1 = $(NONE_LIBS1) 1142#GUI_LIBS2 = $(NONE_LIBS2) 1143#GUI_INSTALL = $(NONE_INSTALL) 1144#GUI_TARGETS = $(NONE_TARGETS) 1145#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1146#GUI_TESTTARGET = $(NONE_TESTTARGET) 1147#GUI_BUNDLE = $(NONE_BUNDLE) 1148 1149# Without a GUI install the normal way. 1150NONE_INSTALL = install_normal 1151 1152### GTK GUI 1153GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1154 gui_beval.c 1155GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1156 objects/pty.o objects/gui_gtk_f.o \ 1157 objects/gui_beval.o 1158GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1159GTK_IPATH = $(GUI_INC_LOC) 1160GTK_LIBS_DIR = $(GUI_LIB_LOC) 1161GTK_LIBS1 = 1162GTK_LIBS2 = $(GTK_LIBNAME) 1163GTK_INSTALL = install_normal install_gui_extra 1164GTK_TARGETS = installglinks 1165GTK_MAN_TARGETS = yes 1166GTK_TESTTARGET = gui 1167GTK_BUNDLE = 1168 1169### Motif GUI 1170MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \ 1171 gui_xmdlg.c gui_xmebw.c 1172MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1173 objects/pty.o objects/gui_beval.o \ 1174 objects/gui_xmdlg.o objects/gui_xmebw.o 1175MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1176MOTIF_IPATH = $(GUI_INC_LOC) 1177MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1178MOTIF_LIBS1 = 1179MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1180MOTIF_INSTALL = install_normal install_gui_extra 1181MOTIF_TARGETS = installglinks 1182MOTIF_MAN_TARGETS = yes 1183MOTIF_TESTTARGET = gui 1184MOTIF_BUNDLE = 1185 1186### Athena GUI 1187### Use Xaw3d to make the menus look a little bit nicer 1188#XAW_LIB = -lXaw3d 1189XAW_LIB = -lXaw 1190 1191### When using Xaw3d, uncomment/comment the following lines to also get the 1192### scrollbars from Xaw3d. 1193#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1194#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1195# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1196#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1197# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1198# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1199ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1200 gui_at_sb.c gui_at_fs.c 1201ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1202 objects/pty.o objects/gui_beval.o \ 1203 objects/gui_at_sb.o objects/gui_at_fs.o 1204ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1205 1206ATHENA_IPATH = $(GUI_INC_LOC) 1207ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1208ATHENA_LIBS1 = $(XAW_LIB) 1209ATHENA_LIBS2 = -lXt 1210ATHENA_INSTALL = install_normal install_gui_extra 1211ATHENA_TARGETS = installglinks 1212ATHENA_MAN_TARGETS = yes 1213ATHENA_TESTTARGET = gui 1214ATHENA_BUNDLE = 1215 1216### neXtaw GUI 1217NEXTAW_LIB = -lneXtaw 1218 1219NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1220NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1221 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1222NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1223 1224NEXTAW_IPATH = $(GUI_INC_LOC) 1225NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1226NEXTAW_LIBS1 = $(NEXTAW_LIB) 1227NEXTAW_LIBS2 = -lXt 1228NEXTAW_INSTALL = install_normal install_gui_extra 1229NEXTAW_TARGETS = installglinks 1230NEXTAW_MAN_TARGETS = yes 1231NEXTAW_TESTTARGET = gui 1232NEXTAW_BUNDLE = 1233 1234### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1235# errors: ld: Undefined symbol 1236# _get_wmShellWidgetClass 1237# _get_applicationShellWidgetClass 1238# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1239# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1240#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1241# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1242# too: 1243#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1244 1245# PHOTON GUI 1246PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1247PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1248PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1249PHOTONGUI_IPATH = 1250PHOTONGUI_LIBS_DIR = 1251PHOTONGUI_LIBS1 = -lph -lphexlib 1252PHOTONGUI_LIBS2 = 1253PHOTONGUI_INSTALL = install_normal install_gui_extra 1254PHOTONGUI_TARGETS = installglinks 1255PHOTONGUI_MAN_TARGETS = yes 1256PHOTONGUI_TESTTARGET = gui 1257PHOTONGUI_BUNDLE = 1258 1259# CARBON GUI 1260CARBONGUI_SRC = gui.c gui_mac.c 1261CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1262CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1263 -Wall -Wno-unknown-pragmas \ 1264 -mdynamic-no-pic -pipe 1265CARBONGUI_IPATH = -I. -Iproto 1266CARBONGUI_LIBS_DIR = 1267CARBONGUI_LIBS1 = -framework Carbon 1268CARBONGUI_LIBS2 = 1269CARBONGUI_INSTALL = install_macosx 1270CARBONGUI_TARGETS = 1271CARBONGUI_MAN_TARGETS = 1272CARBONGUI_TESTTARGET = gui 1273CARBONGUI_BUNDLE = gui_bundle 1274APPDIR = $(VIMNAME).app 1275CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1276 1277# All GUI files 1278ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c 1279ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro 1280 1281# }}} 1282 1283### Command to create dependencies based on #include "..." 1284### prototype headers are ignored due to -DPROTO, system 1285### headers #include <...> are ignored if we use the -MM option, as 1286### e.g. provided by gcc-cpp. 1287### Include FEAT_GUI to get gependency on gui.h 1288### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1289CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1290 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1291 1292# flags for cproto 1293# This is for cproto 3 patchlevel 8 or below 1294# __inline, __attribute__ and __extension__ are not recognized by cproto 1295# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1296#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1297# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1298# -D__extension__= -D__restrict="" \ 1299# -D__gnuc_va_list=char -D__builtin_va_list=char 1300 1301# 1302# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1303# __inline and __attribute__ are now recognized by cproto 1304# -D"foo()=" is not supported by all compilers so do not use it 1305NO_ATTR= 1306# 1307# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1308# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1309# 1310# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1311PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR) 1312 1313 1314################################################ 1315## no changes required below this line ## 1316################################################ 1317 1318SHELL = /bin/sh 1319 1320.SUFFIXES: 1321.SUFFIXES: .c .o .pro 1322 1323PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1324POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS) 1325 1326ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS) 1327 1328# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1329# with "-E". 1330OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1331 1332LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) -Dinline= -D__extension__= -Dalloca=alloca 1333 1334LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)=" 1335 1336DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1337 1338ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1339ALL_LIBS = \ 1340 $(GUI_LIBS1) \ 1341 $(GUI_X_LIBS) \ 1342 $(GUI_LIBS2) \ 1343 $(X_PRE_LIBS) \ 1344 $(X_LIBS) \ 1345 $(X_EXTRA_LIBS) \ 1346 $(LIBS) \ 1347 $(EXTRA_LIBS) \ 1348 $(LUA_LIBS) \ 1349 $(MZSCHEME_LIBS) \ 1350 $(PERL_LIBS) \ 1351 $(PYTHON_LIBS) \ 1352 $(PYTHON3_LIBS) \ 1353 $(TCL_LIBS) \ 1354 $(RUBY_LIBS) \ 1355 $(PROFILE_LIBS) 1356 1357# abbreviations 1358DEST_BIN = $(DESTDIR)$(BINDIR) 1359DEST_VIM = $(DESTDIR)$(VIMLOC) 1360DEST_RT = $(DESTDIR)$(VIMRTLOC) 1361DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1362DEST_COL = $(DESTDIR)$(COLSUBLOC) 1363DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1364DEST_IND = $(DESTDIR)$(INDSUBLOC) 1365DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1366DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1367DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1368DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1369DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1370DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1371DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1372DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1373DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1374DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1375DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1376DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1377DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1378 1379# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1380# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1381# directory first. 1382# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1383DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1384DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1385DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1386DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1387DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1388DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1389DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1390DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1391DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1392DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1393DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1394DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1395 1396# BASIC_SRC: files that are always used 1397# GUI_SRC: extra GUI files for current configuration 1398# ALL_GUI_SRC: all GUI files for Unix 1399# 1400# SRC: files used for current configuration 1401# TAGS_SRC: source files used for make tags 1402# TAGS_INCL: include files used for make tags 1403# ALL_SRC: source files used for make depend and make lint 1404 1405TAGS_INCL = *.h 1406 1407BASIC_SRC = \ 1408 blowfish.c \ 1409 buffer.c \ 1410 charset.c \ 1411 diff.c \ 1412 digraph.c \ 1413 edit.c \ 1414 eval.c \ 1415 ex_cmds.c \ 1416 ex_cmds2.c \ 1417 ex_docmd.c \ 1418 ex_eval.c \ 1419 ex_getln.c \ 1420 fileio.c \ 1421 fold.c \ 1422 getchar.c \ 1423 hardcopy.c \ 1424 hashtab.c \ 1425 if_cscope.c \ 1426 if_xcmdsrv.c \ 1427 main.c \ 1428 mark.c \ 1429 memfile.c \ 1430 memline.c \ 1431 menu.c \ 1432 message.c \ 1433 misc1.c \ 1434 misc2.c \ 1435 move.c \ 1436 mbyte.c \ 1437 normal.c \ 1438 ops.c \ 1439 option.c \ 1440 os_unix.c \ 1441 auto/pathdef.c \ 1442 popupmnu.c \ 1443 quickfix.c \ 1444 regexp.c \ 1445 screen.c \ 1446 search.c \ 1447 sha256.c \ 1448 spell.c \ 1449 syntax.c \ 1450 tag.c \ 1451 term.c \ 1452 ui.c \ 1453 undo.c \ 1454 version.c \ 1455 window.c \ 1456 $(OS_EXTRA_SRC) 1457 1458SRC = $(BASIC_SRC) \ 1459 $(GUI_SRC) \ 1460 $(HANGULIN_SRC) \ 1461 $(LUA_SRC) \ 1462 $(MZSCHEME_SRC) \ 1463 $(PERL_SRC) \ 1464 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1465 $(TCL_SRC) \ 1466 $(RUBY_SRC) \ 1467 $(SNIFF_SRC) \ 1468 $(WORKSHOP_SRC) \ 1469 $(WSDEBUG_SRC) 1470 1471TAGS_SRC = *.c *.cpp if_perl.xs 1472 1473EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1474 if_python.c if_python3.c if_tcl.c if_ruby.c if_sniff.c \ 1475 gui_beval.c workshop.c wsdebug.c integration.c netbeans.c 1476 1477# All sources, also the ones that are not configured 1478ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC) 1479 1480# Which files to check with lint. Select one of these three lines. ALL_SRC 1481# checks more, but may not work well for checking a GUI that wasn't configured. 1482# The perl sources also don't work well with lint. 1483LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1484 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC) 1485#LINT_SRC = $(SRC) 1486#LINT_SRC = $(ALL_SRC) 1487#LINT_SRC = $(BASIC_SRC) 1488 1489OBJ = \ 1490 objects/buffer.o \ 1491 objects/blowfish.o \ 1492 objects/charset.o \ 1493 objects/diff.o \ 1494 objects/digraph.o \ 1495 objects/edit.o \ 1496 objects/eval.o \ 1497 objects/ex_cmds.o \ 1498 objects/ex_cmds2.o \ 1499 objects/ex_docmd.o \ 1500 objects/ex_eval.o \ 1501 objects/ex_getln.o \ 1502 objects/fileio.o \ 1503 objects/fold.o \ 1504 objects/getchar.o \ 1505 objects/hardcopy.o \ 1506 objects/hashtab.o \ 1507 $(HANGULIN_OBJ) \ 1508 objects/if_cscope.o \ 1509 objects/if_xcmdsrv.o \ 1510 objects/main.o \ 1511 objects/mark.o \ 1512 objects/memfile.o \ 1513 objects/memline.o \ 1514 objects/menu.o \ 1515 objects/message.o \ 1516 objects/misc1.o \ 1517 objects/misc2.o \ 1518 objects/move.o \ 1519 objects/mbyte.o \ 1520 objects/normal.o \ 1521 objects/ops.o \ 1522 objects/option.o \ 1523 objects/os_unix.o \ 1524 objects/pathdef.o \ 1525 objects/popupmnu.o \ 1526 objects/quickfix.o \ 1527 objects/regexp.o \ 1528 objects/screen.o \ 1529 objects/search.o \ 1530 objects/sha256.o \ 1531 objects/spell.o \ 1532 objects/syntax.o \ 1533 $(SNIFF_OBJ) \ 1534 objects/tag.o \ 1535 objects/term.o \ 1536 objects/ui.o \ 1537 objects/undo.o \ 1538 objects/window.o \ 1539 $(GUI_OBJ) \ 1540 $(LUA_OBJ) \ 1541 $(MZSCHEME_OBJ) \ 1542 $(PERL_OBJ) \ 1543 $(PYTHON_OBJ) \ 1544 $(PYTHON3_OBJ) \ 1545 $(TCL_OBJ) \ 1546 $(RUBY_OBJ) \ 1547 $(OS_EXTRA_OBJ) \ 1548 $(WORKSHOP_OBJ) \ 1549 $(NETBEANS_OBJ) \ 1550 $(WSDEBUG_OBJ) 1551 1552PRO_AUTO = \ 1553 blowfish.pro \ 1554 buffer.pro \ 1555 charset.pro \ 1556 diff.pro \ 1557 digraph.pro \ 1558 edit.pro \ 1559 eval.pro \ 1560 ex_cmds.pro \ 1561 ex_cmds2.pro \ 1562 ex_docmd.pro \ 1563 ex_eval.pro \ 1564 ex_getln.pro \ 1565 fileio.pro \ 1566 fold.pro \ 1567 getchar.pro \ 1568 hardcopy.pro \ 1569 hashtab.pro \ 1570 hangulin.pro \ 1571 if_cscope.pro \ 1572 if_xcmdsrv.pro \ 1573 if_python.pro \ 1574 if_python3.pro \ 1575 if_ruby.pro \ 1576 main.pro \ 1577 mark.pro \ 1578 memfile.pro \ 1579 memline.pro \ 1580 menu.pro \ 1581 message.pro \ 1582 misc1.pro \ 1583 misc2.pro \ 1584 move.pro \ 1585 mbyte.pro \ 1586 normal.pro \ 1587 ops.pro \ 1588 option.pro \ 1589 os_unix.pro \ 1590 popupmnu.pro \ 1591 quickfix.pro \ 1592 regexp.pro \ 1593 screen.pro \ 1594 search.pro \ 1595 sha256.pro \ 1596 spell.pro \ 1597 syntax.pro \ 1598 tag.pro \ 1599 term.pro \ 1600 termlib.pro \ 1601 ui.pro \ 1602 undo.pro \ 1603 version.pro \ 1604 window.pro \ 1605 gui_beval.pro \ 1606 workshop.pro \ 1607 netbeans.pro \ 1608 $(ALL_GUI_PRO) \ 1609 $(TCL_PRO) 1610 1611# Resources used for the Mac are in one directory. 1612RSRC_DIR = os_mac_rsrc 1613 1614PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \ 1615 os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO) 1616 1617# Default target is making the executable and tools 1618all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1619 1620tools: $(TOOLS) 1621 1622# Run configure with all the setting from above. 1623# 1624# Note: auto/config.h doesn't depend on configure, because running configure 1625# doesn't always update auto/config.h. The timestamp isn't changed if the 1626# file contents didn't change (to avoid recompiling everything). Including a 1627# dependency on auto/config.h would cause running configure each time when 1628# auto/config.h isn't updated. The dependency on auto/config.mk should make 1629# sure configure is run when it's needed. 1630# 1631config auto/config.mk: auto/configure config.mk.in config.h.in 1632 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1633 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1634 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1635 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1636 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1637 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1638 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1639 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1640 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1641 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1642 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1643 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1644 $(CONF_OPT_SYSMOUSE) 1645 1646# Use "make reconfig" to rerun configure without cached values. 1647# When config.h changes, most things will be recompiled automatically. 1648# Invoke $(MAKE) to run config with the empty auto/config.mk. 1649# Invoke $(MAKE) to build all with the filled auto/config.mk. 1650reconfig: scratch clean 1651 $(MAKE) -f Makefile config 1652 $(MAKE) -f Makefile all 1653 1654# Run autoconf to produce auto/configure. 1655# Note: 1656# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1657# producing auto/configure. 1658# - autoconf is not run automatically, because a patch usually changes both 1659# configure.in and auto/configure but can't update the timestamps. People 1660# who do not have (the correct version of) autoconf would run into trouble. 1661# 1662# Two tricks are required to make autoconf put its output in the "auto" dir: 1663# - Temporarily move the ./configure script to ./configure.save. Don't 1664# overwrite it, it's probably the result of an aborted autoconf. 1665# - Use sed to change ./config.log to auto/config.log in the configure script. 1666# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1667# care of: 1668# - configure.lineno: has the line numbers replaced with $LINENO. That 1669# improves patches a LOT, thus use it instead (until someone says it doesn't 1670# work on some system). 1671# - autom4te.cache directory is created and not cleaned up. Delete it. 1672# - Uses ">config.log" instead of "./config.log". 1673autoconf: 1674 if test ! -f configure.save; then mv configure configure.save; fi 1675 autoconf 1676 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1677 chmod 755 auto/configure 1678 mv -f configure.save configure 1679 -rm -rf autom4te.cache 1680 -rm -f auto/config.status auto/config.cache 1681 1682# Re-execute this Makefile to include the new auto/config.mk produced by 1683# configure Only used when typing "make" with a fresh auto/config.mk. 1684myself: 1685 $(MAKE) -f Makefile all 1686 1687 1688# The normal command to compile a .c file to its .o file. 1689CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS) 1690 1691 1692# Link the target for normal use or debugging. 1693# A shell script is used to try linking without unneccesary libraries. 1694$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1695 $(CCC) version.c -o objects/version.o 1696 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1697 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \ 1698 MAKE="$(MAKE)" sh $(srcdir)/link.sh 1699 1700xxd/xxd$(EXEEXT): xxd/xxd.c 1701 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \ 1702 $(MAKE) -f Makefile 1703 1704# Build the language specific files if they were unpacked. 1705# Generate the converted .mo files separately, it's no problem if this fails. 1706languages: 1707 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1708 cd $(PODIR); \ 1709 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1710 fi 1711 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1712 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1713 fi 1714 1715# Update the *.po files for changes in the sources. Only run manually. 1716update-po: 1717 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1718 1719# Generate function prototypes. This is not needed to compile vim, but if 1720# you want to use it, cproto is out there on the net somewhere -- Webb 1721# 1722# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a 1723# few include files that can not be found, that's OK. 1724 1725proto: $(PRO_AUTO) $(PRO_MANUAL) 1726 1727# Filter out arguments that cproto doesn't support. 1728# Don't pass "-pthread" to cproto, it sees it as a list of individual flags. 1729# Don't pass "-fstack-protector" to cproto, for the same reason. 1730# The -E"gcc -E" argument must be separate to avoid problems with shell 1731# quoting. 1732CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 1733 `echo '$(LINT_CFLAGS)' | sed -e 's/-pthread//g' -e 's/-fstack-protector//g'` 1734 1735### Would be nice if this would work for "normal" make. 1736### Currently it only works for (Free)BSD make. 1737#$(PRO_AUTO): $$(*F).c 1738# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 1739 1740# Always define FEAT_GUI. This may generate a few warnings if it's also 1741# defined in auto/config.h, you can ignore that. 1742.c.pro: 1743 $(CPROTO) -DFEAT_GUI $< > proto/$@ 1744 echo "/* vim: set ft=c : */" >> proto/$@ 1745 1746os_amiga.pro: os_amiga.c 1747 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1748 echo "/* vim: set ft=c : */" >> proto/$@ 1749 1750os_msdos.pro: os_msdos.c 1751 $(CPROTO) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@ 1752 echo "/* vim: set ft=c : */" >> proto/$@ 1753 1754os_win16.pro: os_win16.c 1755 $(CPROTO) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@ 1756 echo "/* vim: set ft=c : */" >> proto/$@ 1757 1758os_win32.pro: os_win32.c 1759 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1760 echo "/* vim: set ft=c : */" >> proto/$@ 1761 1762os_mswin.pro: os_mswin.c 1763 $(CPROTO) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1764 echo "/* vim: set ft=c : */" >> proto/$@ 1765 1766os_beos.pro: os_beos.c 1767 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 1768 echo "/* vim: set ft=c : */" >> proto/$@ 1769 1770os_vms.pro: os_vms.c 1771# must use os_vms_conf.h for auto/config.h 1772 mv auto/config.h auto/config.h.save 1773 cp os_vms_conf.h auto/config.h 1774 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 1775 echo "/* vim: set ft=c : */" >> proto/$@ 1776 rm auto/config.h 1777 mv auto/config.h.save auto/config.h 1778 1779# if_perl.pro is special: Use the generated if_perl.c for input and remove 1780# prototypes for local functions. 1781if_perl.pro: auto/if_perl.c 1782 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 1783 1784 1785notags: 1786 -rm -f tags 1787 1788# Note: tags is made for the currently configured version, can't include both 1789# Motif and Athena GUI 1790# You can ignore error messages for missing files. 1791tags TAGS: notags 1792 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 1793 1794# Make a highlight file for types. Requires Exuberant ctags and awk 1795types: types.vim 1796types.vim: $(TAGS_SRC) $(TAGS_INCL) 1797 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 1798 awk 'BEGIN{printf("syntax keyword Type\t")}\ 1799 {printf("%s ", $$1)}END{print ""}' > $@ 1800 1801# Execute the test scripts. Run these after compiling Vim, before installing. 1802# This doesn't depend on $(VIMTARGET), because that won't work when configure 1803# wasn't run yet. Restart make to build it instead. 1804# 1805# This will produce a lot of garbage on your screen, including a few error 1806# messages. Don't worry about that. 1807# If there is a real error, there will be a difference between "test.out" and 1808# a "test99.ok" file. 1809# If everything is alright, the final message will be "ALL DONE". If not you 1810# get "TEST FAILURE". 1811# 1812test check: 1813 $(MAKE) -f Makefile $(VIMTARGET) 1814 -if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1815 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 1816 fi 1817 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 1818 ln -s $(VIMTARGET) vim; \ 1819 fi 1820 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) 1821 1822testclean: 1823 cd testdir; $(MAKE) -f Makefile clean 1824 if test -d $(PODIR); then \ 1825 cd $(PODIR); $(MAKE) checkclean; \ 1826 fi 1827 1828install: $(GUI_INSTALL) 1829 1830install_normal: installvim installtools $(INSTALL_LANGS) install-icons 1831 1832install_gui_extra: installgtutorbin 1833 1834installvim: installvimbin installtutorbin \ 1835 installruntime installlinks installmanlinks 1836 1837# 1838# Avoid overwriting an existing executable, somebody might be running it and 1839# overwriting it could cause it to crash. Deleting it is OK, it won't be 1840# really deleted until all running processes for it have exited. It is 1841# renamed first, in case the deleting doesn't work. 1842# 1843# If you want to keep an older version, rename it before running "make 1844# install". 1845# 1846installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 1847 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 1848 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 1849 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 1850 fi 1851 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 1852 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 1853 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 1854# may create a link to the new executable from /usr/bin/vi 1855 -$(LINKIT) 1856 1857# Long list of arguments for the shell script that installs the manual pages 1858# for one language. 1859INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 1860 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 1861 1862# Install most of the runtime files 1863installruntime: installrtbase installmacros installtutor installspell 1864 1865# install the help files; first adjust the contents for the final location 1866installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 1867 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 1868 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \ 1869 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 1870 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 1871 @echo generating help tags 1872# Generate the help tags with ":helptags" to handle all languages. 1873 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags 1874 cd $(HELPSOURCE); \ 1875 files=`ls *.txt tags`; \ 1876 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 1877 $(INSTALL_DATA) $$files $(DEST_HELP); \ 1878 cd $(DEST_HELP); \ 1879 chmod $(HELPMOD) $$files 1880 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 1881 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 1882# install the menu files 1883 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 1884 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 1885 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 1886 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 1887 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 1888 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 1889# install the evim file 1890 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 1891 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 1892 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 1893 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 1894# install the bugreport file 1895 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 1896 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 1897# install the example vimrc files 1898 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 1899 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 1900 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 1901 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 1902# install the file type detection files 1903 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 1904 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 1905 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 1906 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 1907 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 1908 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 1909 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 1910 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 1911 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 1912 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 1913 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 1914 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 1915 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 1916 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 1917 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 1918 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 1919# install the print resource files 1920 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 1921 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 1922# install the colorscheme files 1923 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 1924 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 1925# install the syntax files 1926 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 1927 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 1928# install the indent files 1929 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 1930 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 1931# install the standard autoload files 1932 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 1933 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 1934 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 1935 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 1936# install the standard plugin files 1937 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 1938 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 1939# install the ftplugin files 1940 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 1941 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 1942# install the compiler files 1943 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 1944 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 1945 1946installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 1947 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 1948 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 1949 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 1950 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 1951# When using CVS some CVS directories might have been copied. 1952# Also delete AAPDIR and *.info files. 1953 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 1954 if test -n "$$cvs"; then \ 1955 rm -rf $$cvs; \ 1956 fi 1957 1958# install the tutor files 1959installtutorbin: $(DEST_VIM) 1960 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 1961 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 1962 1963installgtutorbin: $(DEST_VIM) 1964 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 1965 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 1966 1967installtutor: $(DEST_RT) $(DEST_TUTOR) 1968 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 1969 -rm -f $(DEST_TUTOR)/*.info 1970 chmod $(HELPMOD) $(DEST_TUTOR)/* 1971 1972# Install the spell files, if they exist. This assumes at least the English 1973# spell file is there. 1974installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 1975 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 1976 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 1977 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 1978 fi 1979 1980# install helper program xxd 1981installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 1982 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 1983 $(INSTALL_TOOL_LANGS) 1984 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 1985 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 1986 rm -f $(DEST_BIN)/xxd.rm; \ 1987 fi 1988 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 1989 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 1990 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 1991 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 1992 1993# install the runtime tools 1994 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 1995# When using CVS some CVS directories might have been copied. 1996 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 1997 if test -n "$$cvs"; then \ 1998 rm -rf $$cvs; \ 1999 fi 2000 -chmod $(FILEMOD) $(DEST_TOOLS)/* 2001# replace the path in some tools 2002 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 2003 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2004 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2005 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2006 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2007 2008# install the language specific files for tools, if they were unpacked 2009install-tool-languages: 2010 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2011 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2012 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2013 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2014 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2015 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2016 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2017 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2018 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2019 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2020 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2021 2022# install the language specific files, if they were unpacked 2023install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2024 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2025 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2026 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2027 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2028 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2029 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2030 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2031 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2032 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2033 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2034 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2035 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2036 $(DEST_MAN_FR) $(INSTALLMLARGS) 2037 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2038 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2039 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2040 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2041 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2042 $(DEST_MAN_IT) $(INSTALLMLARGS) 2043 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2044 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2045 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2046 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2047 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2048 $(DEST_MAN_PL) $(INSTALLMLARGS) 2049 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2050 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2051 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2052 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2053 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2054 $(DEST_MAN_RU) $(INSTALLMLARGS) 2055 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2056 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2057 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2058 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2059 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2060 fi 2061 if test -d $(LANGSOURCE); then \ 2062 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2063 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2064 fi 2065 if test -d $(KMAPSOURCE); then \ 2066 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2067 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2068 fi 2069 2070# install the icons for KDE, if the directory exists and the icon doesn't. 2071ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2072ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2073ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2074KDEPATH = $(HOME)/.kde/share/icons 2075install-icons: 2076 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2077 -a ! -f $(ICON48PATH)/gvim.png; then \ 2078 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2079 fi 2080 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2081 -a ! -f $(ICON32PATH)/gvim.png; then \ 2082 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2083 fi 2084 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2085 -a ! -f $(ICON16PATH)/gvim.png; then \ 2086 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2087 fi 2088 2089 2090$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2091 @echo Runtime files not found. 2092 @echo You need to unpack the runtime archive before running "make install". 2093 test -f error 2094 2095$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2096 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2097 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2098 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \ 2099 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2100 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG): 2101 -$(SHELL) ./mkinstalldirs $@ 2102 -chmod $(DIRMOD) $@ 2103 2104# create links from various names to vim. This is only done when the links 2105# (or executables with the same name) don't exist yet. 2106installlinks: $(GUI_TARGETS) \ 2107 $(DEST_BIN)/$(EXTARGET) \ 2108 $(DEST_BIN)/$(VIEWTARGET) \ 2109 $(DEST_BIN)/$(RVIMTARGET) \ 2110 $(DEST_BIN)/$(RVIEWTARGET) \ 2111 $(INSTALLVIMDIFF) 2112 2113installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2114 $(DEST_BIN)/$(GVIEWTARGET) \ 2115 $(DEST_BIN)/$(RGVIMTARGET) \ 2116 $(DEST_BIN)/$(RGVIEWTARGET) \ 2117 $(DEST_BIN)/$(EVIMTARGET) \ 2118 $(DEST_BIN)/$(EVIEWTARGET) \ 2119 $(INSTALLGVIMDIFF) 2120 2121installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2122installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2123 2124$(DEST_BIN)/$(EXTARGET): 2125 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2126 2127$(DEST_BIN)/$(VIEWTARGET): 2128 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2129 2130$(DEST_BIN)/$(GVIMTARGET): 2131 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2132 2133$(DEST_BIN)/$(GVIEWTARGET): 2134 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2135 2136$(DEST_BIN)/$(RVIMTARGET): 2137 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2138 2139$(DEST_BIN)/$(RVIEWTARGET): 2140 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2141 2142$(DEST_BIN)/$(RGVIMTARGET): 2143 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2144 2145$(DEST_BIN)/$(RGVIEWTARGET): 2146 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2147 2148$(DEST_BIN)/$(VIMDIFFTARGET): 2149 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2150 2151$(DEST_BIN)/$(GVIMDIFFTARGET): 2152 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2153 2154$(DEST_BIN)/$(EVIMTARGET): 2155 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2156 2157$(DEST_BIN)/$(EVIEWTARGET): 2158 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2159 2160# Create links for the manual pages with various names to vim. This is only 2161# done when the links (or manpages with the same name) don't exist yet. 2162 2163INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2164 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2165 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2166 $(GVIMDIFFNAME) $(EVIEWNAME) 2167 2168installmanlinks: 2169 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2170 $(DEST_MAN) $(INSTALLMLARGS) 2171 2172uninstall: uninstall_runtime 2173 -rm -f $(DEST_BIN)/$(VIMTARGET) 2174 -rm -f $(DEST_BIN)/vimtutor 2175 -rm -f $(DEST_BIN)/gvimtutor 2176 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2177 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2178 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2179 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2180 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2181 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2182 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2183 2184# Note: the "rmdir" will fail if any files were added after "make install" 2185uninstall_runtime: 2186 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2187 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2188 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2189 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2190 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2191 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2192 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2193 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2194 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2195 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2196 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2197 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2198 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2199 $(DEST_MAN) $(INSTALLMLARGS) 2200 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2201 $(DEST_MAN_FR) $(INSTALLMLARGS) 2202 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2203 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2204 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2205 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2206 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2207 $(DEST_MAN_IT) $(INSTALLMLARGS) 2208 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2209 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2210 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2211 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2212 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2213 $(DEST_MAN_PL) $(INSTALLMLARGS) 2214 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2215 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2216 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2217 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2218 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2219 $(DEST_MAN_RU) $(INSTALLMLARGS) 2220 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2221 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2222 -rm -f $(DEST_MAN)/xxd.1 2223 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2224 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2225 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2226 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2227 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2228 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2229 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2230 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2231 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2232 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2233 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2234 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2235 -rm -f $(SYS_OPTWIN_FILE) 2236 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2237 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2238 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2239 -rm -rf $(DEST_MACRO) 2240 -rm -rf $(DEST_TUTOR) 2241 -rm -rf $(DEST_SPELL) 2242 -rm -rf $(DEST_TOOLS) 2243 -rm -rf $(DEST_LANG) 2244 -rm -rf $(DEST_KMAP) 2245 -rm -rf $(DEST_COMP) 2246 -rm -f $(DEST_PRINT)/*.ps 2247 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2248 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt 2249 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim 2250 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2251 -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT) 2252# This will fail when other Vim versions are installed, no worries. 2253 -rmdir $(DEST_VIM) 2254 2255# Clean up all the files that have been produced, except configure's. 2256# We support common typing mistakes for Juergen! :-) 2257clean celan: testclean 2258 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2259 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c 2260 -rm -f conftest* *~ auto/link.sed 2261 -rm -f runtime pixmaps 2262 -rm -rf $(APPDIR) 2263 -rm -rf mzscheme_base.c 2264 if test -d $(PODIR); then \ 2265 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2266 fi 2267 2268# Make a shadow directory for compilation on another system or with different 2269# features. 2270SHADOWDIR = shadow 2271 2272shadow: runtime pixmaps 2273 mkdir $(SHADOWDIR) 2274 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../po ../vimtutor ../gvimtutor ../mkinstalldirs . 2275 mkdir $(SHADOWDIR)/auto 2276 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2277 cd $(SHADOWDIR); rm -f auto/link.sed 2278 cp Makefile configure $(SHADOWDIR) 2279 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2280 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2281 cp config.mk.dist $(SHADOWDIR) 2282 mkdir $(SHADOWDIR)/xxd 2283 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2284 if test -d $(RSRC_DIR); then \ 2285 cd $(SHADOWDIR); \ 2286 ln -s ../infplist.xml .; \ 2287 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2288 fi 2289 mkdir $(SHADOWDIR)/testdir 2290 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2291 ../../testdir/vimrc.unix \ 2292 ../../testdir/*.in \ 2293 ../../testdir/*.vim \ 2294 ../../testdir/*.ok . 2295 2296# Link needed for doing "make install" in a shadow directory. 2297runtime: 2298 -ln -s ../runtime . 2299 2300# Link needed for doing "make" using GTK in a shadow directory. 2301pixmaps: 2302 -ln -s ../pixmaps . 2303 2304# Update the synmenu.vim file with the latest Syntax menu. 2305# This is only needed when runtime/makemenu.vim was changed. 2306menu: ./vim ../runtime/makemenu.vim 2307 ./vim -u ../runtime/makemenu.vim 2308 2309# Start configure from scratch 2310scrub scratch: 2311 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2312 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2313 touch auto/config.h 2314 cp config.mk.dist auto/config.mk 2315 2316distclean: clean scratch 2317 -rm -f tags 2318 2319dist: distclean 2320 @echo 2321 @echo Making the distribution has to be done in the top directory 2322 2323mdepend: 2324 -@rm -f Makefile~ 2325 cp Makefile Makefile~ 2326 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2327 @for i in $(ALL_SRC) ; do \ 2328 echo "$$i" ; \ 2329 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2330 $(CPP) $$i |\ 2331 grep '^# .*"\./.*\.h"' |\ 2332 sort -t'"' -u +1 -2 |\ 2333 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2334 ` >> tmp_make ; \ 2335 done 2336 mv tmp_make Makefile 2337 2338depend: 2339 -@rm -f Makefile~ 2340 cp Makefile Makefile~ 2341 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2342 -for i in $(ALL_SRC); do echo $$i; \ 2343 $(CPP_DEPEND) $$i | \ 2344 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2345 mv tmp_make Makefile 2346 2347# Run lint. Clean up the *.ln files that are sometimes left behind. 2348lint: 2349 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2350 -rm -f *.ln 2351 2352# Check dosinst.c with lint. 2353lintinstall: 2354 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2355 -rm -f dosinst.ln 2356 2357########################################################################### 2358 2359.c.o: 2360 $(CCC) $< 2361 2362auto/if_perl.c: if_perl.xs 2363 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2364 $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \ 2365 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2366 2367auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2368 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2369 2370QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 2371auto/pathdef.c: Makefile auto/config.mk 2372 -@echo creating $@ 2373 -@echo '/* pathdef.c */' > $@ 2374 -@echo '/* This file is automatically created by Makefile' >> $@ 2375 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2376 -@echo '#include "vim.h"' >> $@ 2377 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2378 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2379 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2380 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2381 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2382 -@if test -n "$(COMPILEDBY)"; then \ 2383 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2384 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2385 -@echo '";' >> $@ 2386 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2387 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2388 -@echo '";' >> $@ 2389 -@sh $(srcdir)/pathdef.sh 2390 2391# All the object files are put in the "objects" directory. Since not all make 2392# commands understand putting object files in another directory, it must be 2393# specified for each file separately. 2394 2395objects: 2396 mkdir objects 2397 2398objects/blowfish.o: blowfish.c 2399 $(CCC) -o $@ blowfish.c 2400 2401objects/buffer.o: buffer.c 2402 $(CCC) -o $@ buffer.c 2403 2404objects/charset.o: charset.c 2405 $(CCC) -o $@ charset.c 2406 2407objects/diff.o: diff.c 2408 $(CCC) -o $@ diff.c 2409 2410objects/digraph.o: digraph.c 2411 $(CCC) -o $@ digraph.c 2412 2413objects/edit.o: edit.c 2414 $(CCC) -o $@ edit.c 2415 2416objects/eval.o: eval.c 2417 $(CCC) -o $@ eval.c 2418 2419objects/ex_cmds.o: ex_cmds.c 2420 $(CCC) -o $@ ex_cmds.c 2421 2422objects/ex_cmds2.o: ex_cmds2.c 2423 $(CCC) -o $@ ex_cmds2.c 2424 2425objects/ex_docmd.o: ex_docmd.c 2426 $(CCC) -o $@ ex_docmd.c 2427 2428objects/ex_eval.o: ex_eval.c 2429 $(CCC) -o $@ ex_eval.c 2430 2431objects/ex_getln.o: ex_getln.c 2432 $(CCC) -o $@ ex_getln.c 2433 2434objects/fileio.o: fileio.c 2435 $(CCC) -o $@ fileio.c 2436 2437objects/fold.o: fold.c 2438 $(CCC) -o $@ fold.c 2439 2440objects/getchar.o: getchar.c 2441 $(CCC) -o $@ getchar.c 2442 2443objects/hardcopy.o: hardcopy.c 2444 $(CCC) -o $@ hardcopy.c 2445 2446objects/hashtab.o: hashtab.c 2447 $(CCC) -o $@ hashtab.c 2448 2449objects/gui.o: gui.c 2450 $(CCC) -o $@ gui.c 2451 2452objects/gui_at_fs.o: gui_at_fs.c 2453 $(CCC) -o $@ gui_at_fs.c 2454 2455objects/gui_at_sb.o: gui_at_sb.c 2456 $(CCC) -o $@ gui_at_sb.c 2457 2458objects/gui_athena.o: gui_athena.c 2459 $(CCC) -o $@ gui_athena.c 2460 2461objects/gui_beval.o: gui_beval.c 2462 $(CCC) -o $@ gui_beval.c 2463 2464objects/gui_gtk.o: gui_gtk.c 2465 $(CCC) -o $@ gui_gtk.c 2466 2467objects/gui_gtk_f.o: gui_gtk_f.c 2468 $(CCC) -o $@ gui_gtk_f.c 2469 2470objects/gui_gtk_x11.o: gui_gtk_x11.c 2471 $(CCC) -o $@ gui_gtk_x11.c 2472 2473objects/gui_motif.o: gui_motif.c 2474 $(CCC) -o $@ gui_motif.c 2475 2476objects/gui_xmdlg.o: gui_xmdlg.c 2477 $(CCC) -o $@ gui_xmdlg.c 2478 2479objects/gui_xmebw.o: gui_xmebw.c 2480 $(CCC) -o $@ gui_xmebw.c 2481 2482objects/gui_x11.o: gui_x11.c 2483 $(CCC) -o $@ gui_x11.c 2484 2485objects/gui_photon.o: gui_photon.c 2486 $(CCC) -o $@ gui_photon.c 2487 2488objects/gui_mac.o: gui_mac.c 2489 $(CCC) -o $@ gui_mac.c 2490 2491objects/hangulin.o: hangulin.c 2492 $(CCC) -o $@ hangulin.c 2493 2494objects/if_cscope.o: if_cscope.c 2495 $(CCC) -o $@ if_cscope.c 2496 2497objects/if_xcmdsrv.o: if_xcmdsrv.c 2498 $(CCC) -o $@ if_xcmdsrv.c 2499 2500objects/if_lua.o: if_lua.c 2501 $(CCC) $(LUA_CFLAGS) -o $@ if_lua.c 2502 2503objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 2504 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 2505 2506mzscheme_base.c: 2507 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 2508 2509objects/if_perl.o: auto/if_perl.c 2510 $(CCC) $(PERL_CFLAGS) -o $@ auto/if_perl.c 2511 2512objects/if_perlsfio.o: if_perlsfio.c 2513 $(CCC) $(PERL_CFLAGS) -o $@ if_perlsfio.c 2514 2515objects/py_config.o: $(PYTHON_CONFDIR)/config.c 2516 $(CCC) $(PYTHON_CFLAGS) -o $@ $(PYTHON_CONFDIR)/config.c \ 2517 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN 2518 2519objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 2520 $(CCC) $(PYTHON_CFLAGS) -o $@ $(PYTHON_CONFDIR)/getpath.c \ 2521 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 2522 $(PYTHON_GETPATH_CFLAGS) 2523 2524objects/py3_config.o: $(PYTHON3_CONFDIR)/config.c 2525 $(CCC) $(PYTHON3_CFLAGS) -o $@ $(PYTHON3_CONFDIR)/config.c \ 2526 -I$(PYTHON3_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN 2527 2528objects/if_python.o: if_python.c if_py_both.h 2529 $(CCC) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) -o $@ if_python.c 2530 2531objects/if_python3.o: if_python3.c if_py_both.h 2532 $(CCC) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) -o $@ if_python3.c 2533 2534objects/if_ruby.o: if_ruby.c 2535 $(CCC) -o $@ if_ruby.c 2536 2537objects/if_sniff.o: if_sniff.c 2538 $(CCC) -o $@ if_sniff.c 2539 2540objects/if_tcl.o: if_tcl.c 2541 $(CCC) -o $@ if_tcl.c 2542 2543objects/integration.o: integration.c 2544 $(CCC) -o $@ integration.c 2545 2546objects/main.o: main.c 2547 $(CCC) -o $@ main.c 2548 2549objects/mark.o: mark.c 2550 $(CCC) -o $@ mark.c 2551 2552objects/memfile.o: memfile.c 2553 $(CCC) -o $@ memfile.c 2554 2555objects/memline.o: memline.c 2556 $(CCC) -o $@ memline.c 2557 2558objects/menu.o: menu.c 2559 $(CCC) -o $@ menu.c 2560 2561objects/message.o: message.c 2562 $(CCC) -o $@ message.c 2563 2564objects/misc1.o: misc1.c 2565 $(CCC) -o $@ misc1.c 2566 2567objects/misc2.o: misc2.c 2568 $(CCC) -o $@ misc2.c 2569 2570objects/move.o: move.c 2571 $(CCC) -o $@ move.c 2572 2573objects/mbyte.o: mbyte.c 2574 $(CCC) -o $@ mbyte.c 2575 2576objects/normal.o: normal.c 2577 $(CCC) -o $@ normal.c 2578 2579objects/ops.o: ops.c 2580 $(CCC) -o $@ ops.c 2581 2582objects/option.o: option.c 2583 $(CCC) -o $@ option.c 2584 2585objects/os_beos.o: os_beos.c 2586 $(CCC) -o $@ os_beos.c 2587 2588objects/os_qnx.o: os_qnx.c 2589 $(CCC) -o $@ os_qnx.c 2590 2591objects/os_macosx.o: os_macosx.m 2592 $(CCC) -o $@ os_macosx.m 2593 2594objects/os_mac_conv.o: os_mac_conv.c 2595 $(CCC) -o $@ os_mac_conv.c 2596 2597objects/os_unix.o: os_unix.c 2598 $(CCC) -o $@ os_unix.c 2599 2600objects/pathdef.o: auto/pathdef.c 2601 $(CCC) -o $@ auto/pathdef.c 2602 2603objects/pty.o: pty.c 2604 $(CCC) -o $@ pty.c 2605 2606objects/popupmnu.o: popupmnu.c 2607 $(CCC) -o $@ popupmnu.c 2608 2609objects/quickfix.o: quickfix.c 2610 $(CCC) -o $@ quickfix.c 2611 2612objects/regexp.o: regexp.c 2613 $(CCC) -o $@ regexp.c 2614 2615objects/screen.o: screen.c 2616 $(CCC) -o $@ screen.c 2617 2618objects/search.o: search.c 2619 $(CCC) -o $@ search.c 2620 2621objects/sha256.o: sha256.c 2622 $(CCC) -o $@ sha256.c 2623 2624objects/spell.o: spell.c 2625 $(CCC) -o $@ spell.c 2626 2627objects/syntax.o: syntax.c 2628 $(CCC) -o $@ syntax.c 2629 2630objects/tag.o: tag.c 2631 $(CCC) -o $@ tag.c 2632 2633objects/term.o: term.c 2634 $(CCC) -o $@ term.c 2635 2636objects/ui.o: ui.c 2637 $(CCC) -o $@ ui.c 2638 2639objects/undo.o: undo.c 2640 $(CCC) -o $@ undo.c 2641 2642objects/window.o: window.c 2643 $(CCC) -o $@ window.c 2644 2645objects/workshop.o: workshop.c 2646 $(CCC) -o $@ workshop.c 2647 2648objects/wsdebug.o: wsdebug.c 2649 $(CCC) -o $@ wsdebug.c 2650 2651objects/netbeans.o: netbeans.c 2652 $(CCC) -o $@ netbeans.c 2653 2654Makefile: 2655 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 2656 2657############################################################################### 2658### MacOS X installation 2659### 2660### This installs a runnable Vim.app in $(prefix) 2661 2662REZ = /Developer/Tools/Rez 2663RESDIR = $(APPDIR)/Contents/Resources 2664VERSION = $(VIMMAJOR).$(VIMMINOR) 2665 2666### Common flags 2667M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 2668 -DAPP_VER=$(VERSION) 2669 2670install_macosx: gui_bundle 2671# Remove the link to the runtime dir, don't want to copy all of that. 2672 -rm $(RESDIR)/vim/runtime 2673 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 2674# Generate the help tags file now, it won't work with "make installruntime". 2675 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 2676# Install the runtime files. Recursive! 2677 -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2678# -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin 2679 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 2680 VIMEXE=$$srcdir/$(VIMTARGET) \ 2681 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2682 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 2683 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 2684 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2685 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 2686# Put the link back. 2687 ln -s `pwd`/../runtime $(RESDIR)/vim 2688# Copy rgb.txt, Mac doesn't always have X11 2689 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2690# TODO: Create the vimtutor and/or gvimtutor application. 2691 2692gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 2693 bundle-language 2694 2695$(RESDIR): 2696 mkdir -p $@ 2697 2698bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 2699# Make a link to the runtime directory, so that we can try out the executable 2700# without installing it. 2701 mkdir -p $(RESDIR)/vim 2702 -ln -s `pwd`/../runtime $(RESDIR)/vim 2703 2704bundle-executable: $(VIMTARGET) 2705 mkdir -p $(APPDIR)/Contents/MacOS 2706 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 2707 2708bundle-info: bundle-dir 2709 @echo "Creating PkgInfo" 2710 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 2711 @echo "Creating Info.plist" 2712 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 2713 2714bundle-resource: bundle-dir bundle-rsrc 2715 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 2716 2717### Classic resources 2718# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 2719# This file is also required for OS X Vim. 2720bundle-rsrc: os_mac.rsr.hqx 2721 @echo "Creating resource fork" 2722 python dehqx.py $< 2723 rm -f gui_mac.rsrc 2724 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 2725 2726# po/Make_osx.pl says something about generating a Mac message file 2727# for Ukrananian. Would somebody using Mac OS X in Ukranian 2728# *really* be upset that Carbon Vim was not localised in 2729# Ukranian? 2730# 2731#bundle-language: bundle-dir po/Make_osx.pl 2732# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 2733bundle-language: bundle-dir 2734 2735$(APPDIR)/Contents: 2736 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS 2737 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj 2738 2739 2740############################################################################### 2741### (automatically generated by 'make depend') 2742### Dependencies: 2743objects/blowfish.o: blowfish.c vim.h auto/config.h feature.h os_unix.h \ 2744 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2745 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2746 globals.h farsi.h arabic.h 2747objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2748 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2749 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2750 arabic.h version.h 2751objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2752 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2753 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2754 arabic.h 2755objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2756 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2757 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2758 arabic.h 2759objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2760 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2761 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2762 arabic.h 2763objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2764 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2765 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2766 arabic.h 2767objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2768 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2769 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2770 arabic.h version.h 2771objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2772 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2773 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2774 arabic.h version.h 2775objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 2776 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2777 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2778 globals.h farsi.h arabic.h version.h 2779objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 2780 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2781 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2782 globals.h farsi.h arabic.h 2783objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2784 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2785 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2786 arabic.h 2787objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 2788 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2789 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2790 globals.h farsi.h arabic.h 2791objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2792 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2793 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2794 arabic.h 2795objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2796 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2797 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2798 arabic.h 2799objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2800 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2801 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2802 arabic.h 2803objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \ 2804 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2805 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2806 globals.h farsi.h arabic.h version.h 2807objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2808 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2809 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2810 arabic.h 2811objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 2812 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2813 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2814 globals.h farsi.h arabic.h if_cscope.h 2815objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 2816 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2817 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2818 globals.h farsi.h arabic.h version.h 2819objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2820 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2821 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2822 arabic.h farsi.c arabic.c 2823objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2824 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2825 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2826 arabic.h 2827objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2828 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2829 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2830 arabic.h 2831objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2832 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2833 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2834 arabic.h 2835objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2836 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2837 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2838 arabic.h 2839objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2840 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2841 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2842 arabic.h 2843objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2844 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2845 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2846 arabic.h version.h 2847objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2848 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2849 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2850 arabic.h 2851objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2852 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2853 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2854 arabic.h 2855objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2856 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2857 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2858 arabic.h 2859objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2860 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2861 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2862 arabic.h 2863objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2864 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2865 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2866objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2867 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2868 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2869 arabic.h 2870objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2871 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2872 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2873 arabic.h if_mzsch.h os_unixx.h 2874objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \ 2875 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2876 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2877 globals.h farsi.h arabic.h 2878objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \ 2879 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2880 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2881 globals.h farsi.h arabic.h 2882objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 2883 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2884 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2885 globals.h farsi.h arabic.h 2886objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2887 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2888 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2889 arabic.h 2890objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2891 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2892 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2893 arabic.h 2894objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2895 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2896 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2897 arabic.h 2898objects/sha256.o: sha256.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2899 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2900 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2901 arabic.h 2902objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2903 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2904 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2905 arabic.h 2906objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2907 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2908 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2909 arabic.h 2910objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2911 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2912 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2913objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2914 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2915 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2916 arabic.h 2917objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2918 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2919 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2920objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2921 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2922 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2923 arabic.h 2924objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2925 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2926 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2927 arabic.h version.h 2928objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2929 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2930 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2931 arabic.h 2932objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2933 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2934 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2935objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \ 2936 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2937 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2938 globals.h farsi.h arabic.h ../pixmaps/stock_icons.h 2939objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 2940 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2941 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2942 globals.h farsi.h arabic.h gui_gtk_f.h 2943objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 2944 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2945 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2946 globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \ 2947 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 2948 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 2949 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 2950 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 2951 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2952 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2953 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2954 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2955 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2956 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2957 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2958 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2959 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2960 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2961 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2962 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2963 ../pixmaps/tb_minwidth.xpm 2964objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \ 2965 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2966 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2967 globals.h farsi.h arabic.h 2968objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \ 2969 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2970 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2971 globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h 2972objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 2973 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2974 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2975 globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \ 2976 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 2977 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 2978 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2979 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2980 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2981 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2982 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2983 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2984 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2985 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2986 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2987 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2988 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2989 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2990 ../pixmaps/tb_minwidth.xpm 2991objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 2992 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2993 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2994 globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \ 2995 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 2996objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2997 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2998 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2999 arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ 3000 ../runtime/vim48x48.xpm 3001objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 3002 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3003 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3004 globals.h farsi.h arabic.h gui_at_sb.h 3005objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 3006 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3007 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3008 globals.h farsi.h arabic.h gui_at_sb.h 3009objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3010 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3011 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 3012objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 3013 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3014 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3015 globals.h farsi.h arabic.h 3016objects/if_lua.o: if_lua.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3017 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3018 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3019 arabic.h 3020objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \ 3021 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3022 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3023 globals.h farsi.h arabic.h if_mzsch.h mzscheme_base.c 3024objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \ 3025 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3026 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3027 globals.h farsi.h arabic.h 3028objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 3029 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3030 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3031 globals.h farsi.h arabic.h 3032objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 3033 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3034 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3035 globals.h farsi.h arabic.h if_py_both.h 3036objects/if_python3.o: if_python3.c vim.h auto/config.h feature.h os_unix.h \ 3037 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3038 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3039 globals.h farsi.h arabic.h if_py_both.h 3040objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3041 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3042 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3043 arabic.h 3044objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3045 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3046 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3047 arabic.h version.h 3048objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \ 3049 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3050 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3051 globals.h farsi.h arabic.h os_unixx.h 3052objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 3053 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3054 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3055 globals.h farsi.h arabic.h 3056objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 3057 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3058 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \ 3059 proto.h globals.h farsi.h arabic.h version.h workshop.h 3060objects/wsdebug.o: wsdebug.c 3061objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 3062 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3063 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3064 globals.h farsi.h arabic.h integration.h 3065objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 3066 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3067 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3068 globals.h farsi.h arabic.h version.h 3069