1Using BPF:
2
3(1) AIX 4.x's version of BPF is undocumented and somewhat unstandard; the
4    current BPF support code includes changes that should work around
5    that; it appears to compile and work on at least one AIX 4.3.3
6    machine.
7
8    Note that the BPF driver and the "/dev/bpf" devices might not exist
9    on your machine; AIX's tcpdump loads the driver and creates the
10    devices if they don't already exist.  Our libpcap should do the
11    same, and the configure script should detect that it's on an AIX
12    system and choose BPF even if the devices aren't there.
13
14(2) If libpcap doesn't compile on your machine when configured to use
15    BPF, or if the workarounds fail to make it work correctly, you
16    should send to tcpdump-workers@lists.tcpdump.org a detailed bug
17    report (if the compile fails, send us the compile error messages;
18    if it compiles but fails to work correctly, send us as detailed as
19    possible a description of the symptoms, including indications of the
20    network link-layer type being wrong or time stamps being wrong).
21
22    If you fix the problems yourself, please submit a patch by forking
23    the branch at
24
25	https://github.com/the-tcpdump-group/libpcap/issues
26
27    and issuing a pull request, so we can incorporate the fixes into the
28    next release.
29
30    If you don't fix the problems yourself, you can, as a workaround,
31    make libpcap use DLPI instead of BPF.
32
33    This can be done by specifying the flag:
34
35       --with-pcap=dlpi
36
37    to the "configure" script for libpcap.
38
39If you use DLPI:
40
41(1) It is a good idea to have the latest version of the DLPI driver on
42    your system, since certain versions may be buggy and cause your AIX
43    system to crash.  DLPI is included in the fileset bos.rte.tty.  I
44    found that the DLPI driver that came with AIX 4.3.2 was buggy, and
45    had to upgrade to bos.rte.tty 4.3.2.4:
46
47	    lslpp -l bos.rte.tty
48
49	    bos.rte.tty     4.3.2.4  COMMITTED  Base TTY Support and Commands
50
51    Updates for AIX filesets can be obtained from:
52    ftp://service.software.ibm.com/aix/fixes/
53
54    These updates can be installed with the smit program.
55
56(2) After compiling libpcap, you need to make sure that the DLPI driver
57    is loaded.  Type:
58
59	    strload -q -d dlpi
60
61    If the result is:
62
63	    dlpi: yes
64
65    then the DLPI driver is loaded correctly.
66
67    If it is:
68
69	    dlpi: no
70
71    Then you need to type:
72
73	    strload -f /etc/dlpi.conf
74 
75    Check again with strload -q -d dlpi that the dlpi driver is loaded.  
76
77    Alternatively, you can uncomment the lines for DLPI in
78    /etc/pse.conf and reboot the machine; this way DLPI will always
79    be loaded when you boot your system.
80
81(3) There appears to be a problem in the DLPI code in some versions of
82    AIX, causing a warning about DL_PROMISC_MULTI failing; this might
83    be responsible for DLPI not being able to capture outgoing packets.
84