1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Gose board
4 *
5 * Copyright (C) 2014-2015 Renesas Electronics Corporation
6 */
7
8/*
9 * SSI-AK4643
10 *
11 * SW1: 1: AK4643
12 *      2: CN22
13 *      3: ADV7511
14 *
15 * This command is required when Playback/Capture
16 *
17 *	amixer set "LINEOUT Mixer DACL" on
18 *	amixer set "DVC Out" 100%
19 *	amixer set "DVC In" 100%
20 *
21 * You can use Mute
22 *
23 *	amixer set "DVC Out Mute" on
24 *	amixer set "DVC In Mute" on
25 *
26 * You can use Volume Ramp
27 *
28 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
29 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
30 *	amixer set "DVC Out Ramp" on
31 *	aplay xxx.wav &
32 *	amixer set "DVC Out"  80%  // Volume Down
33 *	amixer set "DVC Out" 100%  // Volume Up
34 */
35
36/dts-v1/;
37#include "r8a7793.dtsi"
38#include <dt-bindings/gpio/gpio.h>
39#include <dt-bindings/input/input.h>
40
41/ {
42	model = "Gose";
43	compatible = "renesas,gose", "renesas,r8a7793";
44
45	aliases {
46		serial0 = &scif0;
47		serial1 = &scif1;
48		i2c9 = &gpioi2c2;
49		i2c10 = &gpioi2c4;
50		i2c11 = &i2chdmi;
51		i2c12 = &i2cexio4;
52		mmc0 = &sdhi0;
53		mmc1 = &sdhi1;
54		mmc2 = &sdhi2;
55	};
56
57	chosen {
58		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
59		stdout-path = "serial0:115200n8";
60	};
61
62	memory@40000000 {
63		device_type = "memory";
64		reg = <0 0x40000000 0 0x40000000>;
65	};
66
67	keyboard {
68		compatible = "gpio-keys";
69
70		pinctrl-0 = <&keyboard_pins>;
71		pinctrl-names = "default";
72
73		key-1 {
74			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
75			linux,code = <KEY_1>;
76			label = "SW2-1";
77			wakeup-source;
78			debounce-interval = <20>;
79		};
80		key-2 {
81			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
82			linux,code = <KEY_2>;
83			label = "SW2-2";
84			wakeup-source;
85			debounce-interval = <20>;
86		};
87		key-3 {
88			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
89			linux,code = <KEY_3>;
90			label = "SW2-3";
91			wakeup-source;
92			debounce-interval = <20>;
93		};
94		key-4 {
95			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
96			linux,code = <KEY_4>;
97			label = "SW2-4";
98			wakeup-source;
99			debounce-interval = <20>;
100		};
101		key-a {
102			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
103			linux,code = <KEY_A>;
104			label = "SW30";
105			wakeup-source;
106			debounce-interval = <20>;
107		};
108		key-b {
109			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
110			linux,code = <KEY_B>;
111			label = "SW31";
112			wakeup-source;
113			debounce-interval = <20>;
114		};
115		key-c {
116			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
117			linux,code = <KEY_C>;
118			label = "SW32";
119			wakeup-source;
120			debounce-interval = <20>;
121		};
122		key-d {
123			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
124			linux,code = <KEY_D>;
125			label = "SW33";
126			wakeup-source;
127			debounce-interval = <20>;
128		};
129		key-e {
130			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
131			linux,code = <KEY_E>;
132			label = "SW34";
133			wakeup-source;
134			debounce-interval = <20>;
135		};
136		key-f {
137			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
138			linux,code = <KEY_F>;
139			label = "SW35";
140			wakeup-source;
141			debounce-interval = <20>;
142		};
143		key-g {
144			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
145			linux,code = <KEY_G>;
146			label = "SW36";
147			wakeup-source;
148			debounce-interval = <20>;
149		};
150	};
151
152	leds {
153		compatible = "gpio-leds";
154		led6 {
155			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
156			label = "LED6";
157		};
158		led7 {
159			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
160			label = "LED7";
161		};
162		led8 {
163			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
164			label = "LED8";
165		};
166	};
167
168	reg_1p8v: regulator-1v8 {
169		compatible = "regulator-fixed";
170		regulator-name = "fixed-1.8V";
171		regulator-min-microvolt = <1800000>;
172		regulator-max-microvolt = <1800000>;
173		regulator-boot-on;
174		regulator-always-on;
175	};
176
177	reg_3p3v: regulator-3v3 {
178		compatible = "regulator-fixed";
179		regulator-name = "fixed-3.3V";
180		regulator-min-microvolt = <3300000>;
181		regulator-max-microvolt = <3300000>;
182		regulator-boot-on;
183		regulator-always-on;
184	};
185
186	vcc_sdhi0: regulator-vcc-sdhi0 {
187		compatible = "regulator-fixed";
188
189		regulator-name = "SDHI0 Vcc";
190		regulator-min-microvolt = <3300000>;
191		regulator-max-microvolt = <3300000>;
192
193		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
194		enable-active-high;
195	};
196
197	vccq_sdhi0: regulator-vccq-sdhi0 {
198		compatible = "regulator-gpio";
199
200		regulator-name = "SDHI0 VccQ";
201		regulator-min-microvolt = <1800000>;
202		regulator-max-microvolt = <3300000>;
203
204		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
205		gpios-states = <1>;
206		states = <3300000 1>, <1800000 0>;
207	};
208
209	vcc_sdhi1: regulator-vcc-sdhi1 {
210		compatible = "regulator-fixed";
211
212		regulator-name = "SDHI1 Vcc";
213		regulator-min-microvolt = <3300000>;
214		regulator-max-microvolt = <3300000>;
215
216		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
217		enable-active-high;
218	};
219
220	vccq_sdhi1: regulator-vccq-sdhi1 {
221		compatible = "regulator-gpio";
222
223		regulator-name = "SDHI1 VccQ";
224		regulator-min-microvolt = <1800000>;
225		regulator-max-microvolt = <3300000>;
226
227		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
228		gpios-states = <1>;
229		states = <3300000 1>, <1800000 0>;
230	};
231
232	vcc_sdhi2: regulator-vcc-sdhi2 {
233		compatible = "regulator-fixed";
234
235		regulator-name = "SDHI2 Vcc";
236		regulator-min-microvolt = <3300000>;
237		regulator-max-microvolt = <3300000>;
238
239		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
240		enable-active-high;
241	};
242
243	vccq_sdhi2: regulator-vccq-sdhi2 {
244		compatible = "regulator-gpio";
245
246		regulator-name = "SDHI2 VccQ";
247		regulator-min-microvolt = <1800000>;
248		regulator-max-microvolt = <3300000>;
249
250		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
251		gpios-states = <1>;
252		states = <3300000 1>, <1800000 0>;
253	};
254
255	audio_clock: audio_clock {
256		compatible = "fixed-clock";
257		#clock-cells = <0>;
258		clock-frequency = <11289600>;
259	};
260
261	rsnd_ak4643: sound {
262		compatible = "simple-audio-card";
263
264		simple-audio-card,format = "left_j";
265		simple-audio-card,bitclock-master = <&sndcodec>;
266		simple-audio-card,frame-master = <&sndcodec>;
267
268		sndcpu: simple-audio-card,cpu {
269			sound-dai = <&rcar_sound>;
270		};
271
272		sndcodec: simple-audio-card,codec {
273			sound-dai = <&ak4643>;
274			clocks = <&audio_clock>;
275		};
276	};
277
278	hdmi-in {
279		compatible = "hdmi-connector";
280		type = "a";
281
282		port {
283			hdmi_con_in: endpoint {
284				remote-endpoint = <&adv7612_in>;
285			};
286		};
287	};
288
289	hdmi-out {
290		compatible = "hdmi-connector";
291		type = "a";
292
293		port {
294			hdmi_con_out: endpoint {
295				remote-endpoint = <&adv7511_out>;
296			};
297		};
298	};
299
300	composite-in {
301		compatible = "composite-video-connector";
302
303		port {
304			composite_con_in: endpoint {
305				remote-endpoint = <&adv7180_in>;
306			};
307		};
308	};
309
310	x2_clk: x2-clock {
311		compatible = "fixed-clock";
312		#clock-cells = <0>;
313		clock-frequency = <74250000>;
314	};
315
316	x13_clk: x13-clock {
317		compatible = "fixed-clock";
318		#clock-cells = <0>;
319		clock-frequency = <148500000>;
320	};
321
322	gpioi2c2: i2c-9 {
323		#address-cells = <1>;
324		#size-cells = <0>;
325		compatible = "i2c-gpio";
326		status = "disabled";
327		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
328		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
329		i2c-gpio,delay-us = <5>;
330	};
331
332	gpioi2c4: i2c-10 {
333		#address-cells = <1>;
334		#size-cells = <0>;
335		compatible = "i2c-gpio";
336		status = "disabled";
337		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
338		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
339		i2c-gpio,delay-us = <5>;
340	};
341
342	/*
343	 * A fallback to GPIO is provided for I2C2.
344	 */
345	i2chdmi: i2c-mux1 {
346		compatible = "i2c-demux-pinctrl";
347		i2c-parent = <&i2c2>, <&gpioi2c2>;
348		i2c-bus-name = "i2c-hdmi";
349		#address-cells = <1>;
350		#size-cells = <0>;
351
352		ak4643: codec@12 {
353			compatible = "asahi-kasei,ak4643";
354			#sound-dai-cells = <0>;
355			reg = <0x12>;
356		};
357
358		composite-in@20 {
359			compatible = "adi,adv7180cp";
360			reg = <0x20>;
361
362			ports {
363				#address-cells = <1>;
364				#size-cells = <0>;
365
366				port@0 {
367					reg = <0>;
368					adv7180_in: endpoint {
369						remote-endpoint = <&composite_con_in>;
370					};
371				};
372
373				port@3 {
374					reg = <3>;
375					adv7180_out: endpoint {
376						bus-width = <8>;
377						remote-endpoint = <&vin1ep>;
378					};
379				};
380			};
381		};
382
383		hdmi@39 {
384			compatible = "adi,adv7511w";
385			reg = <0x39>;
386			interrupt-parent = <&gpio3>;
387			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
388
389			avdd-supply = <&reg_1p8v>;
390			dvdd-supply = <&reg_1p8v>;
391			pvdd-supply = <&reg_1p8v>;
392			dvdd-3v-supply = <&reg_3p3v>;
393			bgvdd-supply = <&reg_1p8v>;
394
395			adi,input-depth = <8>;
396			adi,input-colorspace = "rgb";
397			adi,input-clock = "1x";
398
399			ports {
400				#address-cells = <1>;
401				#size-cells = <0>;
402
403				port@0 {
404					reg = <0>;
405					adv7511_in: endpoint {
406						remote-endpoint = <&du_out_rgb>;
407					};
408				};
409
410				port@1 {
411					reg = <1>;
412					adv7511_out: endpoint {
413						remote-endpoint = <&hdmi_con_out>;
414					};
415				};
416			};
417		};
418
419		hdmi-in@4c {
420			compatible = "adi,adv7612";
421			reg = <0x4c>;
422			interrupt-parent = <&gpio4>;
423			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
424			default-input = <0>;
425
426			ports {
427				#address-cells = <1>;
428				#size-cells = <0>;
429
430				port@0 {
431					reg = <0>;
432					adv7612_in: endpoint {
433						remote-endpoint = <&hdmi_con_in>;
434					};
435				};
436
437				port@2 {
438					reg = <2>;
439					adv7612_out: endpoint {
440						remote-endpoint = <&vin0ep2>;
441					};
442				};
443			};
444		};
445
446		eeprom@50 {
447			compatible = "renesas,r1ex24002", "atmel,24c02";
448			reg = <0x50>;
449			pagesize = <16>;
450		};
451	};
452
453	/*
454	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
455	 * A fallback to GPIO is provided.
456	 */
457	i2cexio4: i2c-mux2 {
458		compatible = "i2c-demux-pinctrl";
459		i2c-parent = <&i2c4>, <&gpioi2c4>;
460		i2c-bus-name = "i2c-exio4";
461		#address-cells = <1>;
462		#size-cells = <0>;
463	};
464};
465
466&du {
467	pinctrl-0 = <&du_pins>;
468	pinctrl-names = "default";
469	status = "okay";
470
471	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
472		 <&x13_clk>, <&x2_clk>;
473	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
474
475	ports {
476		port@0 {
477			endpoint {
478				remote-endpoint = <&adv7511_in>;
479			};
480		};
481	};
482};
483
484&lvds0 {
485	ports {
486		port@1 {
487			lvds_connector: endpoint {
488			};
489		};
490	};
491};
492
493&extal_clk {
494	clock-frequency = <20000000>;
495};
496
497&pfc {
498	pinctrl-0 = <&scif_clk_pins>;
499	pinctrl-names = "default";
500
501	i2c2_pins: i2c2 {
502		groups = "i2c2";
503		function = "i2c2";
504	};
505
506	i2c4_pins: i2c4 {
507		groups = "i2c4_c";
508		function = "i2c4";
509	};
510
511	du_pins: du {
512		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
513		function = "du";
514	};
515
516	scif0_pins: scif0 {
517		groups = "scif0_data_d";
518		function = "scif0";
519	};
520
521	scif1_pins: scif1 {
522		groups = "scif1_data_d";
523		function = "scif1";
524	};
525
526	scif_clk_pins: scif_clk {
527		groups = "scif_clk";
528		function = "scif_clk";
529	};
530
531	ether_pins: ether {
532		groups = "eth_link", "eth_mdio", "eth_rmii";
533		function = "eth";
534	};
535
536	phy1_pins: phy1 {
537		groups = "intc_irq0";
538		function = "intc";
539	};
540
541	pmic_irq_pins: pmicirq {
542		groups = "intc_irq2";
543		function = "intc";
544	};
545
546	sdhi0_pins: sd0 {
547		groups = "sdhi0_data4", "sdhi0_ctrl";
548		function = "sdhi0";
549		power-source = <3300>;
550	};
551
552	sdhi0_pins_uhs: sd0_uhs {
553		groups = "sdhi0_data4", "sdhi0_ctrl";
554		function = "sdhi0";
555		power-source = <1800>;
556	};
557
558	sdhi1_pins: sd1 {
559		groups = "sdhi1_data4", "sdhi1_ctrl";
560		function = "sdhi1";
561		power-source = <3300>;
562	};
563
564	sdhi1_pins_uhs: sd1_uhs {
565		groups = "sdhi1_data4", "sdhi1_ctrl";
566		function = "sdhi1";
567		power-source = <1800>;
568	};
569
570	sdhi2_pins: sd2 {
571		groups = "sdhi2_data4", "sdhi2_ctrl";
572		function = "sdhi2";
573		power-source = <3300>;
574	};
575
576	sdhi2_pins_uhs: sd2_uhs {
577		groups = "sdhi2_data4", "sdhi2_ctrl";
578		function = "sdhi2";
579		power-source = <1800>;
580	};
581
582	qspi_pins: qspi {
583		groups = "qspi_ctrl", "qspi_data4";
584		function = "qspi";
585	};
586
587	sound_pins: sound {
588		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
589		function = "ssi";
590	};
591
592	sound_clk_pins: sound_clk {
593		groups = "audio_clk_a";
594		function = "audio_clk";
595	};
596
597	keyboard_pins: keyboard {
598		pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
599		bias-pull-up;
600	};
601
602	vin0_pins: vin0 {
603		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
604		function = "vin0";
605	};
606
607	vin1_pins: vin1 {
608		groups = "vin1_data8", "vin1_clk";
609		function = "vin1";
610	};
611};
612
613&ether {
614	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
615	pinctrl-names = "default";
616
617	phy-handle = <&phy1>;
618	renesas,ether-link-active-low;
619	status = "okay";
620
621	phy1: ethernet-phy@1 {
622		compatible = "ethernet-phy-id0022.1537",
623			     "ethernet-phy-ieee802.3-c22";
624		reg = <1>;
625		interrupt-parent = <&irqc0>;
626		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
627		micrel,led-mode = <1>;
628		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
629	};
630};
631
632&cmt0 {
633	status = "okay";
634};
635
636&cpu0 {
637	cpu0-supply = <&vdd_dvfs>;
638};
639
640&rwdt {
641	timeout-sec = <60>;
642	status = "okay";
643};
644
645&scif0 {
646	pinctrl-0 = <&scif0_pins>;
647	pinctrl-names = "default";
648
649	status = "okay";
650};
651
652&scif1 {
653	pinctrl-0 = <&scif1_pins>;
654	pinctrl-names = "default";
655
656	status = "okay";
657};
658
659&scif_clk {
660	clock-frequency = <14745600>;
661};
662
663&sdhi0 {
664	pinctrl-0 = <&sdhi0_pins>;
665	pinctrl-1 = <&sdhi0_pins_uhs>;
666	pinctrl-names = "default", "state_uhs";
667
668	vmmc-supply = <&vcc_sdhi0>;
669	vqmmc-supply = <&vccq_sdhi0>;
670	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
671	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
672	sd-uhs-sdr50;
673	sd-uhs-sdr104;
674	status = "okay";
675};
676
677&sdhi1 {
678	pinctrl-0 = <&sdhi1_pins>;
679	pinctrl-1 = <&sdhi1_pins_uhs>;
680	pinctrl-names = "default", "state_uhs";
681
682	vmmc-supply = <&vcc_sdhi1>;
683	vqmmc-supply = <&vccq_sdhi1>;
684	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
685	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
686	sd-uhs-sdr50;
687	status = "okay";
688};
689
690&sdhi2 {
691	pinctrl-0 = <&sdhi2_pins>;
692	pinctrl-1 = <&sdhi2_pins_uhs>;
693	pinctrl-names = "default", "state_uhs";
694
695	vmmc-supply = <&vcc_sdhi2>;
696	vqmmc-supply = <&vccq_sdhi2>;
697	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
698	sd-uhs-sdr50;
699	status = "okay";
700};
701
702&qspi {
703	pinctrl-0 = <&qspi_pins>;
704	pinctrl-names = "default";
705
706	status = "okay";
707
708	flash@0 {
709		compatible = "spansion,s25fl512s", "jedec,spi-nor";
710		reg = <0>;
711		spi-max-frequency = <30000000>;
712		spi-tx-bus-width = <4>;
713		spi-rx-bus-width = <4>;
714		spi-cpol;
715		spi-cpha;
716		m25p,fast-read;
717
718		partitions {
719			compatible = "fixed-partitions";
720			#address-cells = <1>;
721			#size-cells = <1>;
722
723			partition@0 {
724				label = "loader";
725				reg = <0x00000000 0x00040000>;
726				read-only;
727			};
728			partition@40000 {
729				label = "user";
730				reg = <0x00040000 0x00400000>;
731				read-only;
732			};
733			partition@440000 {
734				label = "flash";
735				reg = <0x00440000 0x03bc0000>;
736			};
737		};
738	};
739};
740
741&i2c2 {
742	pinctrl-0 = <&i2c2_pins>;
743	pinctrl-names = "i2c-hdmi";
744
745	status = "okay";
746	clock-frequency = <100000>;
747
748};
749
750&i2c6 {
751	pinctrl-names = "default";
752	pinctrl-0 = <&pmic_irq_pins>;
753	status = "okay";
754	clock-frequency = <100000>;
755
756	pmic@58 {
757		compatible = "dlg,da9063";
758		reg = <0x58>;
759		interrupt-parent = <&irqc0>;
760		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
761		interrupt-controller;
762		#interrupt-cells = <2>;
763
764		rtc {
765			compatible = "dlg,da9063-rtc";
766		};
767
768		watchdog {
769			compatible = "dlg,da9063-watchdog";
770		};
771	};
772
773	vdd_dvfs: regulator@68 {
774		compatible = "dlg,da9210";
775		reg = <0x68>;
776		interrupt-parent = <&irqc0>;
777		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
778
779		regulator-min-microvolt = <1000000>;
780		regulator-max-microvolt = <1000000>;
781		regulator-boot-on;
782		regulator-always-on;
783	};
784};
785
786&i2c4 {
787	pinctrl-0 = <&i2c4_pins>;
788	pinctrl-names = "i2c-exio4";
789};
790
791&rcar_sound {
792	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
793	pinctrl-names = "default";
794
795	/* Single DAI */
796	#sound-dai-cells = <0>;
797
798	status = "okay";
799
800	rcar_sound,dai {
801		dai0 {
802			playback = <&ssi0>, <&src2>, <&dvc0>;
803			capture  = <&ssi1>, <&src3>, <&dvc1>;
804		};
805	};
806};
807
808&ssi1 {
809	shared-pin;
810};
811
812/* HDMI video input */
813&vin0 {
814	status = "okay";
815	pinctrl-0 = <&vin0_pins>;
816	pinctrl-names = "default";
817
818	port {
819		vin0ep2: endpoint {
820			remote-endpoint = <&adv7612_out>;
821			bus-width = <24>;
822			hsync-active = <0>;
823			vsync-active = <0>;
824			pclk-sample = <1>;
825			data-active = <1>;
826		};
827	};
828};
829
830/* composite video input */
831&vin1 {
832	pinctrl-0 = <&vin1_pins>;
833	pinctrl-names = "default";
834
835	status = "okay";
836
837	port {
838		vin1ep: endpoint {
839			remote-endpoint = <&adv7180_out>;
840			bus-width = <8>;
841		};
842	};
843};
844