1/*
2 *  BSD LICENSE
3 *
4 *  Copyright(c) 2016 Broadcom.  All rights reserved.
5 *
6 *  Redistribution and use in source and binary forms, with or without
7 *  modification, are permitted provided that the following conditions
8 *  are met:
9 *
10 *    * Redistributions of source code must retain the above copyright
11 *      notice, this list of conditions and the following disclaimer.
12 *    * Redistributions in binary form must reproduce the above copyright
13 *      notice, this list of conditions and the following disclaimer in
14 *      the documentation and/or other materials provided with the
15 *      distribution.
16 *    * Neither the name of Broadcom Corporation nor the names of its
17 *      contributors may be used to endorse or promote products derived
18 *      from this software without specific prior written permission.
19 *
20 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/dts-v1/;
34
35#include "bcm-nsp.dtsi"
36#include <dt-bindings/gpio/gpio.h>
37
38/ {
39	model = "NorthStar Plus SVK (BCM958623HR)";
40	compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
41
42	chosen {
43		stdout-path = "serial0:115200n8";
44	};
45
46	memory@60000000 {
47		device_type = "memory";
48		reg = <0x60000000 0x80000000>;
49	};
50
51	gpio-restart {
52		compatible = "gpio-restart";
53		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
54		open-source;
55		priority = <200>;
56	};
57};
58
59/* USB 3 and SLIC support needed to be complete */
60
61&dma {
62	status = "okay";
63};
64
65&amac0 {
66	status = "okay";
67};
68
69&amac1 {
70	status = "okay";
71};
72
73&amac2 {
74	status = "okay";
75};
76
77&ehci0 {
78	status = "okay";
79};
80
81&nand_controller {
82	nand@0 {
83		compatible = "brcm,nandcs";
84		reg = <0>;
85		nand-on-flash-bbt;
86
87		#address-cells = <1>;
88		#size-cells = <1>;
89
90		nand-ecc-strength = <24>;
91		nand-ecc-step-size = <1024>;
92
93		brcm,nand-oob-sector-size = <27>;
94
95		partition@0 {
96			label = "nboot";
97			reg = <0x00000000 0x00200000>;
98			read-only;
99		};
100		partition@200000 {
101			label = "nenv";
102			reg = <0x00200000 0x00400000>;
103		};
104		partition@600000 {
105			label = "nsystem";
106			reg = <0x00600000 0x00a00000>;
107		};
108		partition@1000000 {
109			label = "nrootfs";
110			reg = <0x01000000 0x03000000>;
111		};
112		partition@4000000 {
113			label = "ncustfs";
114			reg = <0x04000000 0x3c000000>;
115		};
116	};
117};
118
119&ohci0 {
120	status = "okay";
121};
122
123&pcie0 {
124	status = "okay";
125};
126
127&pcie1 {
128	status = "okay";
129};
130
131&pinctrl {
132	pinctrl-names = "default";
133	pinctrl-0 = <&nand_sel>;
134	nand_sel: nand_sel {
135		function = "nand";
136		groups = "nand_grp";
137	};
138};
139
140&sata_phy0 {
141	status = "okay";
142};
143
144&qspi {
145	status = "okay";
146	bspi-sel = <0>;
147	flash: flash@0 {
148		#address-cells = <1>;
149		#size-cells = <1>;
150		compatible = "m25p80";
151		reg = <0x0>;
152		spi-max-frequency = <12500000>;
153		m25p,fast-read;
154		spi-cpol;
155		spi-cpha;
156
157		partition@0 {
158			label = "boot";
159			reg = <0x00000000 0x000a0000>;
160		};
161
162		partition@a0000 {
163			label = "env";
164			reg = <0x000a0000 0x00060000>;
165		};
166
167		partition@100000 {
168			label = "system";
169			reg = <0x00100000 0x00600000>;
170		};
171
172		partition@700000 {
173			label = "rootfs";
174			reg = <0x00700000 0x01900000>;
175		};
176	};
177};
178
179&srab {
180	compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
181	status = "okay";
182
183	ports {
184		port@0 {
185			label = "port0";
186			reg = <0>;
187		};
188
189		port@1 {
190			label = "port1";
191			reg = <1>;
192		};
193
194		port@2 {
195			label = "port2";
196			reg = <2>;
197		};
198
199		port@3 {
200			label = "port3";
201			reg = <3>;
202		};
203
204		port@4 {
205			label = "port4";
206			reg = <4>;
207		};
208
209		port@8 {
210			ethernet = <&amac2>;
211			label = "cpu";
212			reg = <8>;
213			fixed-link {
214				speed = <1000>;
215				full-duplex;
216			};
217		};
218	};
219};
220
221&uart0 {
222	status = "okay";
223};
224
225&usb3_phy {
226	status = "okay";
227};
228
229&xhci {
230	status = "okay";
231};
232