1/*
2 * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
3 * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 *  a) This file is free software; you can redistribute it and/or
11 *     modify it under the terms of the GNU General Public License as
12 *     published by the Free Software Foundation; either version 2 of the
13 *     License, or (at your option) any later version.
14 *
15 *     This file is distributed in the hope that it will be useful,
16 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
17 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18 *     GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 *  b) Permission is hereby granted, free of charge, to any person
23 *     obtaining a copy of this software and associated documentation
24 *     files (the "Software"), to deal in the Software without
25 *     restriction, including without limitation the rights to use,
26 *     copy, modify, merge, publish, distribute, sublicense, and/or
27 *     sell copies of the Software, and to permit persons to whom the
28 *     Software is furnished to do so, subject to the following
29 *     conditions:
30 *
31 *     The above copyright notice and this permission notice shall be
32 *     included in all copies or substantial portions of the Software.
33 *
34 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 *     OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44#include <dt-bindings/interrupt-controller/arm-gic.h>
45#include <dt-bindings/clock/sun6i-rtc.h>
46#include <dt-bindings/clock/sun8i-de2.h>
47#include <dt-bindings/clock/sun8i-r40-ccu.h>
48#include <dt-bindings/clock/sun8i-tcon-top.h>
49#include <dt-bindings/reset/sun8i-r40-ccu.h>
50#include <dt-bindings/reset/sun8i-de2.h>
51#include <dt-bindings/thermal/thermal.h>
52
53/ {
54	#address-cells = <1>;
55	#size-cells = <1>;
56	interrupt-parent = <&gic>;
57
58	clocks {
59		#address-cells = <1>;
60		#size-cells = <1>;
61		ranges;
62
63		osc24M: osc24M {
64			#clock-cells = <0>;
65			compatible = "fixed-clock";
66			clock-frequency = <24000000>;
67			clock-accuracy = <50000>;
68			clock-output-names = "osc24M";
69		};
70
71		osc32k: osc32k {
72			#clock-cells = <0>;
73			compatible = "fixed-clock";
74			clock-frequency = <32768>;
75			clock-accuracy = <20000>;
76			clock-output-names = "ext-osc32k";
77		};
78	};
79
80	cpus {
81		#address-cells = <1>;
82		#size-cells = <0>;
83
84		cpu0: cpu@0 {
85			compatible = "arm,cortex-a7";
86			device_type = "cpu";
87			reg = <0>;
88			clocks = <&ccu CLK_CPU>;
89			clock-names = "cpu";
90			#cooling-cells = <2>;
91		};
92
93		cpu1: cpu@1 {
94			compatible = "arm,cortex-a7";
95			device_type = "cpu";
96			reg = <1>;
97			clocks = <&ccu CLK_CPU>;
98			clock-names = "cpu";
99			#cooling-cells = <2>;
100		};
101
102		cpu2: cpu@2 {
103			compatible = "arm,cortex-a7";
104			device_type = "cpu";
105			reg = <2>;
106			clocks = <&ccu CLK_CPU>;
107			clock-names = "cpu";
108			#cooling-cells = <2>;
109		};
110
111		cpu3: cpu@3 {
112			compatible = "arm,cortex-a7";
113			device_type = "cpu";
114			reg = <3>;
115			clocks = <&ccu CLK_CPU>;
116			clock-names = "cpu";
117			#cooling-cells = <2>;
118		};
119	};
120
121	de: display-engine {
122		compatible = "allwinner,sun8i-r40-display-engine";
123		allwinner,pipelines = <&mixer0>, <&mixer1>;
124		status = "disabled";
125	};
126
127	thermal-zones {
128		cpu_thermal: cpu0-thermal {
129			/* milliseconds */
130			polling-delay-passive = <0>;
131			polling-delay = <0>;
132			thermal-sensors = <&ths 0>;
133
134			trips {
135				cpu_hot_trip: cpu-hot {
136					temperature = <80000>;
137					hysteresis = <2000>;
138					type = "passive";
139				};
140
141				cpu_very_hot_trip: cpu-very-hot {
142					temperature = <115000>;
143					hysteresis = <0>;
144					type = "critical";
145				};
146			};
147
148			cooling-maps {
149				cpu-hot-limit {
150					trip = <&cpu_hot_trip>;
151					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
152							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
153							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
154							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
155				};
156			};
157		};
158
159		gpu_thermal: gpu-thermal {
160			/* milliseconds */
161			polling-delay-passive = <0>;
162			polling-delay = <0>;
163			thermal-sensors = <&ths 1>;
164		};
165	};
166
167	soc {
168		compatible = "simple-bus";
169		#address-cells = <1>;
170		#size-cells = <1>;
171		ranges;
172
173		display_clocks: clock@1000000 {
174			compatible = "allwinner,sun8i-r40-de2-clk",
175				     "allwinner,sun8i-h3-de2-clk";
176			reg = <0x01000000 0x10000>;
177			clocks = <&ccu CLK_BUS_DE>,
178				 <&ccu CLK_DE>;
179			clock-names = "bus",
180				      "mod";
181			resets = <&ccu RST_BUS_DE>;
182			#clock-cells = <1>;
183			#reset-cells = <1>;
184		};
185
186		mixer0: mixer@1100000 {
187			compatible = "allwinner,sun8i-r40-de2-mixer-0";
188			reg = <0x01100000 0x100000>;
189			clocks = <&display_clocks CLK_BUS_MIXER0>,
190				 <&display_clocks CLK_MIXER0>;
191			clock-names = "bus",
192				      "mod";
193			resets = <&display_clocks RST_MIXER0>;
194
195			ports {
196				#address-cells = <1>;
197				#size-cells = <0>;
198
199				mixer0_out: port@1 {
200					reg = <1>;
201					mixer0_out_tcon_top: endpoint {
202						remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
203					};
204				};
205			};
206		};
207
208		mixer1: mixer@1200000 {
209			compatible = "allwinner,sun8i-r40-de2-mixer-1";
210			reg = <0x01200000 0x100000>;
211			clocks = <&display_clocks CLK_BUS_MIXER1>,
212				 <&display_clocks CLK_MIXER1>;
213			clock-names = "bus",
214				      "mod";
215			resets = <&display_clocks RST_WB>;
216
217			ports {
218				#address-cells = <1>;
219				#size-cells = <0>;
220
221				mixer1_out: port@1 {
222					reg = <1>;
223					mixer1_out_tcon_top: endpoint {
224						remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
225					};
226				};
227			};
228		};
229
230		deinterlace: deinterlace@1400000 {
231			compatible = "allwinner,sun8i-r40-deinterlace",
232				     "allwinner,sun8i-h3-deinterlace";
233			reg = <0x01400000 0x20000>;
234			clocks = <&ccu CLK_BUS_DEINTERLACE>,
235				 <&ccu CLK_DEINTERLACE>,
236				 /*
237				  * NOTE: Contrary to what datasheet claims,
238				  * DRAM deinterlace gate doesn't exist and
239				  * it's shared with CSI1.
240				  */
241				 <&ccu CLK_DRAM_CSI1>;
242			clock-names = "bus", "mod", "ram";
243			resets = <&ccu RST_BUS_DEINTERLACE>;
244			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
245			interconnects = <&mbus 9>;
246			interconnect-names = "dma-mem";
247		};
248
249		syscon: system-control@1c00000 {
250			compatible = "allwinner,sun8i-r40-system-control",
251				     "allwinner,sun4i-a10-system-control";
252			reg = <0x01c00000 0x30>;
253			#address-cells = <1>;
254			#size-cells = <1>;
255			ranges;
256
257			sram_c: sram@1d00000 {
258				compatible = "mmio-sram";
259				reg = <0x01d00000 0xd0000>;
260				#address-cells = <1>;
261				#size-cells = <1>;
262				ranges = <0 0x01d00000 0xd0000>;
263
264				ve_sram: sram-section@0 {
265					compatible = "allwinner,sun8i-r40-sram-c1",
266						     "allwinner,sun4i-a10-sram-c1";
267					reg = <0x000000 0x80000>;
268				};
269			};
270		};
271
272		nmi_intc: interrupt-controller@1c00030 {
273			compatible = "allwinner,sun7i-a20-sc-nmi";
274			interrupt-controller;
275			#interrupt-cells = <2>;
276			reg = <0x01c00030 0x0c>;
277			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
278		};
279
280		dma: dma-controller@1c02000 {
281			compatible = "allwinner,sun8i-r40-dma",
282				     "allwinner,sun50i-a64-dma";
283			reg = <0x01c02000 0x1000>;
284			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
285			clocks = <&ccu CLK_BUS_DMA>;
286			dma-channels = <16>;
287			dma-requests = <31>;
288			resets = <&ccu RST_BUS_DMA>;
289			#dma-cells = <1>;
290		};
291
292		spi0: spi@1c05000 {
293			compatible = "allwinner,sun8i-r40-spi",
294				     "allwinner,sun8i-h3-spi";
295			reg = <0x01c05000 0x1000>;
296			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
297			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
298			clock-names = "ahb", "mod";
299			resets = <&ccu RST_BUS_SPI0>;
300			status = "disabled";
301			#address-cells = <1>;
302			#size-cells = <0>;
303		};
304
305		spi1: spi@1c06000 {
306			compatible = "allwinner,sun8i-r40-spi",
307				     "allwinner,sun8i-h3-spi";
308			reg = <0x01c06000 0x1000>;
309			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
310			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
311			clock-names = "ahb", "mod";
312			resets = <&ccu RST_BUS_SPI1>;
313			status = "disabled";
314			#address-cells = <1>;
315			#size-cells = <0>;
316		};
317
318		csi0: csi@1c09000 {
319			compatible = "allwinner,sun8i-r40-csi0",
320				     "allwinner,sun7i-a20-csi0";
321			reg = <0x01c09000 0x1000>;
322			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
323			clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
324				 <&ccu CLK_DRAM_CSI0>;
325			clock-names = "bus", "isp", "ram";
326			resets = <&ccu RST_BUS_CSI0>;
327			interconnects = <&mbus 5>;
328			interconnect-names = "dma-mem";
329			status = "disabled";
330		};
331
332		video-codec@1c0e000 {
333			compatible = "allwinner,sun8i-r40-video-engine";
334			reg = <0x01c0e000 0x1000>;
335			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
336			<&ccu CLK_DRAM_VE>;
337			clock-names = "ahb", "mod", "ram";
338			resets = <&ccu RST_BUS_VE>;
339			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
340			allwinner,sram = <&ve_sram 1>;
341			interconnects = <&mbus 4>;
342			interconnect-names = "dma-mem";
343		};
344
345		mmc0: mmc@1c0f000 {
346			compatible = "allwinner,sun8i-r40-mmc",
347				     "allwinner,sun50i-a64-mmc";
348			reg = <0x01c0f000 0x1000>;
349			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
350			clock-names = "ahb", "mmc";
351			resets = <&ccu RST_BUS_MMC0>;
352			reset-names = "ahb";
353			pinctrl-0 = <&mmc0_pins>;
354			pinctrl-names = "default";
355			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
356			status = "disabled";
357			#address-cells = <1>;
358			#size-cells = <0>;
359		};
360
361		mmc1: mmc@1c10000 {
362			compatible = "allwinner,sun8i-r40-mmc",
363				     "allwinner,sun50i-a64-mmc";
364			reg = <0x01c10000 0x1000>;
365			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
366			clock-names = "ahb", "mmc";
367			resets = <&ccu RST_BUS_MMC1>;
368			reset-names = "ahb";
369			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
370			status = "disabled";
371			#address-cells = <1>;
372			#size-cells = <0>;
373		};
374
375		mmc2: mmc@1c11000 {
376			compatible = "allwinner,sun8i-r40-emmc",
377				     "allwinner,sun50i-a64-emmc";
378			reg = <0x01c11000 0x1000>;
379			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
380			clock-names = "ahb", "mmc";
381			resets = <&ccu RST_BUS_MMC2>;
382			reset-names = "ahb";
383			pinctrl-0 = <&mmc2_pins>;
384			pinctrl-names = "default";
385			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
386			status = "disabled";
387			#address-cells = <1>;
388			#size-cells = <0>;
389		};
390
391		mmc3: mmc@1c12000 {
392			compatible = "allwinner,sun8i-r40-mmc",
393				     "allwinner,sun50i-a64-mmc";
394			reg = <0x01c12000 0x1000>;
395			clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
396			clock-names = "ahb", "mmc";
397			resets = <&ccu RST_BUS_MMC3>;
398			reset-names = "ahb";
399			pinctrl-0 = <&mmc3_pins>;
400			pinctrl-names = "default";
401			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
402			status = "disabled";
403			#address-cells = <1>;
404			#size-cells = <0>;
405		};
406
407		usbphy: phy@1c13400 {
408			compatible = "allwinner,sun8i-r40-usb-phy";
409			reg = <0x01c13400 0x14>,
410			      <0x01c14800 0x4>,
411			      <0x01c19800 0x4>,
412			      <0x01c1c800 0x4>;
413			reg-names = "phy_ctrl",
414				    "pmu0",
415				    "pmu1",
416				    "pmu2";
417			clocks = <&ccu CLK_USB_PHY0>,
418				 <&ccu CLK_USB_PHY1>,
419				 <&ccu CLK_USB_PHY2>;
420			clock-names = "usb0_phy",
421				      "usb1_phy",
422				      "usb2_phy";
423			resets = <&ccu RST_USB_PHY0>,
424				 <&ccu RST_USB_PHY1>,
425				 <&ccu RST_USB_PHY2>;
426			reset-names = "usb0_reset",
427				      "usb1_reset",
428				      "usb2_reset";
429			status = "disabled";
430			#phy-cells = <1>;
431		};
432
433		crypto: crypto@1c15000 {
434			compatible = "allwinner,sun8i-r40-crypto";
435			reg = <0x01c15000 0x1000>;
436			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
437			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
438			clock-names = "bus", "mod";
439			resets = <&ccu RST_BUS_CE>;
440		};
441
442		spi2: spi@1c17000 {
443			compatible = "allwinner,sun8i-r40-spi",
444				     "allwinner,sun8i-h3-spi";
445			reg = <0x01c17000 0x1000>;
446			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
447			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
448			clock-names = "ahb", "mod";
449			resets = <&ccu RST_BUS_SPI2>;
450			status = "disabled";
451			#address-cells = <1>;
452			#size-cells = <0>;
453		};
454
455		ahci: sata@1c18000 {
456			compatible = "allwinner,sun8i-r40-ahci";
457			reg = <0x01c18000 0x1000>;
458			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
459			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
460			resets = <&ccu RST_BUS_SATA>;
461			reset-names = "ahci";
462			status = "disabled";
463		};
464
465		ehci1: usb@1c19000 {
466			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
467			reg = <0x01c19000 0x100>;
468			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
469			clocks = <&ccu CLK_BUS_EHCI1>;
470			resets = <&ccu RST_BUS_EHCI1>;
471			phys = <&usbphy 1>;
472			phy-names = "usb";
473			status = "disabled";
474		};
475
476		ohci1: usb@1c19400 {
477			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
478			reg = <0x01c19400 0x100>;
479			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
480			clocks = <&ccu CLK_BUS_OHCI1>,
481				 <&ccu CLK_USB_OHCI1>;
482			resets = <&ccu RST_BUS_OHCI1>;
483			phys = <&usbphy 1>;
484			phy-names = "usb";
485			status = "disabled";
486		};
487
488		ehci2: usb@1c1c000 {
489			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
490			reg = <0x01c1c000 0x100>;
491			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
492			clocks = <&ccu CLK_BUS_EHCI2>;
493			resets = <&ccu RST_BUS_EHCI2>;
494			phys = <&usbphy 2>;
495			phy-names = "usb";
496			status = "disabled";
497		};
498
499		ohci2: usb@1c1c400 {
500			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
501			reg = <0x01c1c400 0x100>;
502			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
503			clocks = <&ccu CLK_BUS_OHCI2>,
504				 <&ccu CLK_USB_OHCI2>;
505			resets = <&ccu RST_BUS_OHCI2>;
506			phys = <&usbphy 2>;
507			phy-names = "usb";
508			status = "disabled";
509		};
510
511		spi3: spi@1c1f000 {
512			compatible = "allwinner,sun8i-r40-spi",
513				     "allwinner,sun8i-h3-spi";
514			reg = <0x01c1f000 0x1000>;
515			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
516			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
517			clock-names = "ahb", "mod";
518			resets = <&ccu RST_BUS_SPI3>;
519			status = "disabled";
520			#address-cells = <1>;
521			#size-cells = <0>;
522		};
523
524		ccu: clock@1c20000 {
525			compatible = "allwinner,sun8i-r40-ccu";
526			reg = <0x01c20000 0x400>;
527			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
528			clock-names = "hosc", "losc";
529			#clock-cells = <1>;
530			#reset-cells = <1>;
531		};
532
533		rtc: rtc@1c20400 {
534			compatible = "allwinner,sun8i-r40-rtc";
535			reg = <0x01c20400 0x400>;
536			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
537			clock-output-names = "osc32k", "osc32k-out";
538			clocks = <&osc32k>;
539			#clock-cells = <1>;
540		};
541
542		pio: pinctrl@1c20800 {
543			compatible = "allwinner,sun8i-r40-pinctrl";
544			reg = <0x01c20800 0x400>;
545			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
546			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
547				 <&rtc CLK_OSC32K>;
548			clock-names = "apb", "hosc", "losc";
549			gpio-controller;
550			interrupt-controller;
551			#interrupt-cells = <3>;
552			#gpio-cells = <3>;
553
554			can_ph_pins: can-ph-pins {
555				pins = "PH20", "PH21";
556				function = "can";
557			};
558
559			can_pa_pins: can-pa-pins {
560				pins = "PA16", "PA17";
561				function = "can";
562			};
563
564			clk_out_a_pin: clk-out-a-pin {
565				pins = "PI12";
566				function = "clk_out_a";
567			};
568
569			/omit-if-no-ref/
570			csi0_8bits_pins: csi0-8bits-pins {
571				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
572				       "PE6", "PE7", "PE8", "PE9", "PE10",
573				       "PE11";
574				function = "csi0";
575			};
576
577			/omit-if-no-ref/
578			csi0_mclk_pin: csi0-mclk-pin {
579				pins = "PE1";
580				function = "csi0";
581			};
582
583			gmac_rgmii_pins: gmac-rgmii-pins {
584				pins = "PA0", "PA1", "PA2", "PA3",
585				       "PA4", "PA5", "PA6", "PA7",
586				       "PA8", "PA10", "PA11", "PA12",
587				       "PA13", "PA15", "PA16";
588				function = "gmac";
589				/*
590				 * data lines in RGMII mode use DDR mode
591				 * and need a higher signal drive strength
592				 */
593				drive-strength = <40>;
594			};
595
596			i2c0_pins: i2c0-pins {
597				pins = "PB0", "PB1";
598				function = "i2c0";
599			};
600
601			i2c1_pins: i2c1-pins {
602				pins = "PB18", "PB19";
603				function = "i2c1";
604			};
605
606			i2c2_pins: i2c2-pins {
607				pins = "PB20", "PB21";
608				function = "i2c2";
609			};
610
611			i2c3_pins: i2c3-pins {
612				pins = "PI0", "PI1";
613				function = "i2c3";
614			};
615
616			i2c4_pins: i2c4-pins {
617				pins = "PI2", "PI3";
618				function = "i2c4";
619			};
620
621			ir0_pins: ir0-pins {
622				pins = "PB4";
623				function = "ir0";
624			};
625
626			ir1_pins: ir1-pins {
627				pins = "PB23";
628				function = "ir1";
629			};
630
631			mmc0_pins: mmc0-pins {
632				pins = "PF0", "PF1", "PF2",
633				       "PF3", "PF4", "PF5";
634				function = "mmc0";
635				drive-strength = <30>;
636				bias-pull-up;
637			};
638
639			mmc1_pg_pins: mmc1-pg-pins {
640				pins = "PG0", "PG1", "PG2",
641				       "PG3", "PG4", "PG5";
642				function = "mmc1";
643				drive-strength = <30>;
644				bias-pull-up;
645			};
646
647			mmc2_pins: mmc2-pins {
648				pins = "PC5", "PC6", "PC7", "PC8", "PC9",
649				       "PC10", "PC11", "PC12", "PC13", "PC14",
650				       "PC15", "PC24";
651				function = "mmc2";
652				drive-strength = <30>;
653				bias-pull-up;
654			};
655
656			/omit-if-no-ref/
657			mmc3_pins: mmc3-pins {
658				pins = "PI4", "PI5", "PI6",
659				       "PI7", "PI8", "PI9";
660				function = "mmc3";
661				drive-strength = <30>;
662				bias-pull-up;
663			};
664
665			/omit-if-no-ref/
666			spi0_pc_pins: spi0-pc-pins {
667				pins = "PC0", "PC1", "PC2";
668				function = "spi0";
669			};
670
671			/omit-if-no-ref/
672			spi0_cs0_pc_pin: spi0-cs0-pc-pin {
673				pins = "PC23";
674				function = "spi0";
675			};
676
677			/omit-if-no-ref/
678			spi1_pi_pins: spi1-pi-pins {
679				pins = "PI17", "PI18", "PI19";
680				function = "spi1";
681			};
682
683			/omit-if-no-ref/
684			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
685				pins = "PI16";
686				function = "spi1";
687			};
688
689			/omit-if-no-ref/
690			spi1_cs1_pi_pin: spi1-cs1-pi-pin {
691				pins = "PI15";
692				function = "spi1";
693			};
694
695			/omit-if-no-ref/
696			uart0_pb_pins: uart0-pb-pins {
697				pins = "PB22", "PB23";
698				function = "uart0";
699			};
700
701			/omit-if-no-ref/
702			uart2_pi_pins: uart2-pi-pins {
703				pins = "PI18", "PI19";
704				function = "uart2";
705			};
706
707			/omit-if-no-ref/
708			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
709				pins = "PI16", "PI17";
710				function = "uart2";
711			};
712
713			/omit-if-no-ref/
714			uart3_pg_pins: uart3-pg-pins {
715				pins = "PG6", "PG7";
716				function = "uart3";
717			};
718
719			/omit-if-no-ref/
720			uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
721				pins = "PG8", "PG9";
722				function = "uart3";
723			};
724
725			/omit-if-no-ref/
726			uart4_pg_pins: uart4-pg-pins {
727				pins = "PG10", "PG11";
728				function = "uart4";
729			};
730
731			/omit-if-no-ref/
732			uart5_ph_pins: uart5-ph-pins {
733				pins = "PH6", "PH7";
734				function = "uart5";
735			};
736
737			/omit-if-no-ref/
738			uart7_pi_pins: uart7-pi-pins {
739				pins = "PI20", "PI21";
740				function = "uart7";
741			};
742		};
743
744		timer@1c20c00 {
745			compatible = "allwinner,sun4i-a10-timer";
746			reg = <0x01c20c00 0x90>;
747			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
748				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
749				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
750				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
751				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
752				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
753			clocks = <&osc24M>;
754		};
755
756		wdt: watchdog@1c20c90 {
757			compatible = "allwinner,sun4i-a10-wdt";
758			reg = <0x01c20c90 0x10>;
759			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
760			clocks = <&osc24M>;
761		};
762
763		ir0: ir@1c21800 {
764			compatible = "allwinner,sun8i-r40-ir",
765				     "allwinner,sun6i-a31-ir";
766			reg = <0x01c21800 0x400>;
767			pinctrl-0 = <&ir0_pins>;
768			pinctrl-names = "default";
769			clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>;
770			clock-names = "apb", "ir";
771			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
772			resets = <&ccu RST_BUS_IR0>;
773			status = "disabled";
774		};
775
776		ir1: ir@1c21c00 {
777			compatible = "allwinner,sun8i-r40-ir",
778				     "allwinner,sun6i-a31-ir";
779			reg = <0x01c21c00 0x400>;
780			pinctrl-0 = <&ir1_pins>;
781			pinctrl-names = "default";
782			clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>;
783			clock-names = "apb", "ir";
784			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
785			resets = <&ccu RST_BUS_IR1>;
786			status = "disabled";
787		};
788
789		i2s0: i2s@1c22000 {
790			#sound-dai-cells = <0>;
791			compatible = "allwinner,sun8i-r40-i2s",
792				     "allwinner,sun8i-h3-i2s";
793			reg = <0x01c22000 0x400>;
794			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
795			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
796			clock-names = "apb", "mod";
797			resets = <&ccu RST_BUS_I2S0>;
798			dmas = <&dma 3>, <&dma 3>;
799			dma-names = "rx", "tx";
800		};
801
802		i2s1: i2s@1c22400 {
803			#sound-dai-cells = <0>;
804			compatible = "allwinner,sun8i-r40-i2s",
805				     "allwinner,sun8i-h3-i2s";
806			reg = <0x01c22400 0x400>;
807			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
808			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
809			clock-names = "apb", "mod";
810			resets = <&ccu RST_BUS_I2S1>;
811			dmas = <&dma 4>, <&dma 4>;
812			dma-names = "rx", "tx";
813		};
814
815		i2s2: i2s@1c22800 {
816			#sound-dai-cells = <0>;
817			compatible = "allwinner,sun8i-r40-i2s",
818				     "allwinner,sun8i-h3-i2s";
819			reg = <0x01c22800 0x400>;
820			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
821			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
822			clock-names = "apb", "mod";
823			resets = <&ccu RST_BUS_I2S2>;
824			dmas = <&dma 6>, <&dma 6>;
825			dma-names = "rx", "tx";
826		};
827
828		ths: thermal-sensor@1c24c00 {
829			compatible = "allwinner,sun8i-r40-ths";
830			reg = <0x01c24c00 0x100>;
831			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
832			clock-names = "bus", "mod";
833			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
834			resets = <&ccu RST_BUS_THS>;
835			/* TODO: add nvmem-cells for calibration */
836			#thermal-sensor-cells = <1>;
837		};
838
839		uart0: serial@1c28000 {
840			compatible = "snps,dw-apb-uart";
841			reg = <0x01c28000 0x400>;
842			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
843			reg-shift = <2>;
844			reg-io-width = <4>;
845			clocks = <&ccu CLK_BUS_UART0>;
846			resets = <&ccu RST_BUS_UART0>;
847			status = "disabled";
848		};
849
850		uart1: serial@1c28400 {
851			compatible = "snps,dw-apb-uart";
852			reg = <0x01c28400 0x400>;
853			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
854			reg-shift = <2>;
855			reg-io-width = <4>;
856			clocks = <&ccu CLK_BUS_UART1>;
857			resets = <&ccu RST_BUS_UART1>;
858			status = "disabled";
859		};
860
861		uart2: serial@1c28800 {
862			compatible = "snps,dw-apb-uart";
863			reg = <0x01c28800 0x400>;
864			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
865			reg-shift = <2>;
866			reg-io-width = <4>;
867			clocks = <&ccu CLK_BUS_UART2>;
868			resets = <&ccu RST_BUS_UART2>;
869			status = "disabled";
870		};
871
872		uart3: serial@1c28c00 {
873			compatible = "snps,dw-apb-uart";
874			reg = <0x01c28c00 0x400>;
875			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
876			reg-shift = <2>;
877			reg-io-width = <4>;
878			clocks = <&ccu CLK_BUS_UART3>;
879			resets = <&ccu RST_BUS_UART3>;
880			status = "disabled";
881		};
882
883		uart4: serial@1c29000 {
884			compatible = "snps,dw-apb-uart";
885			reg = <0x01c29000 0x400>;
886			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
887			reg-shift = <2>;
888			reg-io-width = <4>;
889			clocks = <&ccu CLK_BUS_UART4>;
890			resets = <&ccu RST_BUS_UART4>;
891			status = "disabled";
892		};
893
894		uart5: serial@1c29400 {
895			compatible = "snps,dw-apb-uart";
896			reg = <0x01c29400 0x400>;
897			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
898			reg-shift = <2>;
899			reg-io-width = <4>;
900			clocks = <&ccu CLK_BUS_UART5>;
901			resets = <&ccu RST_BUS_UART5>;
902			status = "disabled";
903		};
904
905		uart6: serial@1c29800 {
906			compatible = "snps,dw-apb-uart";
907			reg = <0x01c29800 0x400>;
908			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
909			reg-shift = <2>;
910			reg-io-width = <4>;
911			clocks = <&ccu CLK_BUS_UART6>;
912			resets = <&ccu RST_BUS_UART6>;
913			status = "disabled";
914		};
915
916		uart7: serial@1c29c00 {
917			compatible = "snps,dw-apb-uart";
918			reg = <0x01c29c00 0x400>;
919			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
920			reg-shift = <2>;
921			reg-io-width = <4>;
922			clocks = <&ccu CLK_BUS_UART7>;
923			resets = <&ccu RST_BUS_UART7>;
924			status = "disabled";
925		};
926
927		i2c0: i2c@1c2ac00 {
928			compatible = "allwinner,sun6i-a31-i2c";
929			reg = <0x01c2ac00 0x400>;
930			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
931			clocks = <&ccu CLK_BUS_I2C0>;
932			resets = <&ccu RST_BUS_I2C0>;
933			pinctrl-0 = <&i2c0_pins>;
934			pinctrl-names = "default";
935			status = "disabled";
936			#address-cells = <1>;
937			#size-cells = <0>;
938		};
939
940		i2c1: i2c@1c2b000 {
941			compatible = "allwinner,sun6i-a31-i2c";
942			reg = <0x01c2b000 0x400>;
943			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
944			clocks = <&ccu CLK_BUS_I2C1>;
945			resets = <&ccu RST_BUS_I2C1>;
946			pinctrl-0 = <&i2c1_pins>;
947			pinctrl-names = "default";
948			status = "disabled";
949			#address-cells = <1>;
950			#size-cells = <0>;
951		};
952
953		i2c2: i2c@1c2b400 {
954			compatible = "allwinner,sun6i-a31-i2c";
955			reg = <0x01c2b400 0x400>;
956			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
957			clocks = <&ccu CLK_BUS_I2C2>;
958			resets = <&ccu RST_BUS_I2C2>;
959			pinctrl-0 = <&i2c2_pins>;
960			pinctrl-names = "default";
961			status = "disabled";
962			#address-cells = <1>;
963			#size-cells = <0>;
964		};
965
966		i2c3: i2c@1c2b800 {
967			compatible = "allwinner,sun6i-a31-i2c";
968			reg = <0x01c2b800 0x400>;
969			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
970			clocks = <&ccu CLK_BUS_I2C3>;
971			resets = <&ccu RST_BUS_I2C3>;
972			pinctrl-0 = <&i2c3_pins>;
973			pinctrl-names = "default";
974			status = "disabled";
975			#address-cells = <1>;
976			#size-cells = <0>;
977		};
978
979		can0: can@1c2bc00 {
980			compatible = "allwinner,sun8i-r40-can";
981			reg = <0x01c2bc00 0x400>;
982			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
983			clocks = <&ccu CLK_BUS_CAN>;
984			resets = <&ccu RST_BUS_CAN>;
985			status = "disabled";
986		};
987
988		i2c4: i2c@1c2c000 {
989			compatible = "allwinner,sun6i-a31-i2c";
990			reg = <0x01c2c000 0x400>;
991			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
992			clocks = <&ccu CLK_BUS_I2C4>;
993			resets = <&ccu RST_BUS_I2C4>;
994			pinctrl-0 = <&i2c4_pins>;
995			pinctrl-names = "default";
996			status = "disabled";
997			#address-cells = <1>;
998			#size-cells = <0>;
999		};
1000
1001		mali: gpu@1c40000 {
1002			compatible = "allwinner,sun8i-r40-mali", "arm,mali-400";
1003			reg = <0x01c40000 0x10000>;
1004			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
1005				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
1006				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1007				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
1008				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
1009				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
1010				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
1011			interrupt-names = "gp",
1012					  "gpmmu",
1013					  "pp0",
1014					  "ppmmu0",
1015					  "pp1",
1016					  "ppmmu1",
1017					  "pmu";
1018			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
1019			clock-names = "bus", "core";
1020			resets = <&ccu RST_BUS_GPU>;
1021		};
1022
1023		gmac: ethernet@1c50000 {
1024			compatible = "allwinner,sun8i-r40-gmac";
1025			syscon = <&ccu>;
1026			reg = <0x01c50000 0x10000>;
1027			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
1028			interrupt-names = "macirq";
1029			resets = <&ccu RST_BUS_GMAC>;
1030			reset-names = "stmmaceth";
1031			clocks = <&ccu CLK_BUS_GMAC>;
1032			clock-names = "stmmaceth";
1033			status = "disabled";
1034
1035			gmac_mdio: mdio {
1036				compatible = "snps,dwmac-mdio";
1037				#address-cells = <1>;
1038				#size-cells = <0>;
1039			};
1040		};
1041
1042		mbus: dram-controller@1c62000 {
1043			compatible = "allwinner,sun8i-r40-mbus";
1044			reg = <0x01c62000 0x1000>;
1045			clocks = <&ccu 155>;
1046			#address-cells = <1>;
1047			#size-cells = <1>;
1048			dma-ranges = <0x00000000 0x40000000 0x80000000>;
1049			#interconnect-cells = <1>;
1050		};
1051
1052		tcon_top: tcon-top@1c70000 {
1053			compatible = "allwinner,sun8i-r40-tcon-top";
1054			reg = <0x01c70000 0x1000>;
1055			clocks = <&ccu CLK_BUS_TCON_TOP>,
1056				 <&ccu CLK_TCON_TV0>,
1057				 <&ccu CLK_TVE0>,
1058				 <&ccu CLK_TCON_TV1>,
1059				 <&ccu CLK_TVE1>,
1060				 <&ccu CLK_DSI_DPHY>;
1061			clock-names = "bus",
1062				      "tcon-tv0",
1063				      "tve0",
1064				      "tcon-tv1",
1065				      "tve1",
1066				      "dsi";
1067			clock-output-names = "tcon-top-tv0",
1068					     "tcon-top-tv1",
1069					     "tcon-top-dsi";
1070			resets = <&ccu RST_BUS_TCON_TOP>;
1071			#clock-cells = <1>;
1072
1073			ports {
1074				#address-cells = <1>;
1075				#size-cells = <0>;
1076
1077				tcon_top_mixer0_in: port@0 {
1078					reg = <0>;
1079
1080					tcon_top_mixer0_in_mixer0: endpoint {
1081						remote-endpoint = <&mixer0_out_tcon_top>;
1082					};
1083				};
1084
1085				tcon_top_mixer0_out: port@1 {
1086					#address-cells = <1>;
1087					#size-cells = <0>;
1088					reg = <1>;
1089
1090					tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
1091						reg = <0>;
1092					};
1093
1094					tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
1095						reg = <1>;
1096					};
1097
1098					tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
1099						reg = <2>;
1100						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
1101					};
1102
1103					tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
1104						reg = <3>;
1105						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
1106					};
1107				};
1108
1109				tcon_top_mixer1_in: port@2 {
1110					#address-cells = <1>;
1111					#size-cells = <0>;
1112					reg = <2>;
1113
1114					tcon_top_mixer1_in_mixer1: endpoint@1 {
1115						reg = <1>;
1116						remote-endpoint = <&mixer1_out_tcon_top>;
1117					};
1118				};
1119
1120				tcon_top_mixer1_out: port@3 {
1121					#address-cells = <1>;
1122					#size-cells = <0>;
1123					reg = <3>;
1124
1125					tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
1126						reg = <0>;
1127					};
1128
1129					tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
1130						reg = <1>;
1131					};
1132
1133					tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
1134						reg = <2>;
1135						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
1136					};
1137
1138					tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
1139						reg = <3>;
1140						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
1141					};
1142				};
1143
1144				tcon_top_hdmi_in: port@4 {
1145					#address-cells = <1>;
1146					#size-cells = <0>;
1147					reg = <4>;
1148
1149					tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
1150						reg = <0>;
1151						remote-endpoint = <&tcon_tv0_out_tcon_top>;
1152					};
1153
1154					tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
1155						reg = <1>;
1156						remote-endpoint = <&tcon_tv1_out_tcon_top>;
1157					};
1158				};
1159
1160				tcon_top_hdmi_out: port@5 {
1161					reg = <5>;
1162
1163					tcon_top_hdmi_out_hdmi: endpoint {
1164						remote-endpoint = <&hdmi_in_tcon_top>;
1165					};
1166				};
1167			};
1168		};
1169
1170		tcon_tv0: lcd-controller@1c73000 {
1171			compatible = "allwinner,sun8i-r40-tcon-tv";
1172			reg = <0x01c73000 0x1000>;
1173			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
1174			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
1175			clock-names = "ahb", "tcon-ch1";
1176			resets = <&ccu RST_BUS_TCON_TV0>;
1177			reset-names = "lcd";
1178			status = "disabled";
1179
1180			ports {
1181				#address-cells = <1>;
1182				#size-cells = <0>;
1183
1184				tcon_tv0_in: port@0 {
1185					#address-cells = <1>;
1186					#size-cells = <0>;
1187					reg = <0>;
1188
1189					tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
1190						reg = <0>;
1191						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
1192					};
1193
1194					tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
1195						reg = <1>;
1196						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
1197					};
1198				};
1199
1200				tcon_tv0_out: port@1 {
1201					#address-cells = <1>;
1202					#size-cells = <0>;
1203					reg = <1>;
1204
1205					tcon_tv0_out_tcon_top: endpoint@1 {
1206						reg = <1>;
1207						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
1208					};
1209				};
1210			};
1211		};
1212
1213		tcon_tv1: lcd-controller@1c74000 {
1214			compatible = "allwinner,sun8i-r40-tcon-tv";
1215			reg = <0x01c74000 0x1000>;
1216			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
1217			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
1218			clock-names = "ahb", "tcon-ch1";
1219			resets = <&ccu RST_BUS_TCON_TV1>;
1220			reset-names = "lcd";
1221			status = "disabled";
1222
1223			ports {
1224				#address-cells = <1>;
1225				#size-cells = <0>;
1226
1227				tcon_tv1_in: port@0 {
1228					#address-cells = <1>;
1229					#size-cells = <0>;
1230					reg = <0>;
1231
1232					tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
1233						reg = <0>;
1234						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
1235					};
1236
1237					tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
1238						reg = <1>;
1239						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
1240					};
1241				};
1242
1243				tcon_tv1_out: port@1 {
1244					#address-cells = <1>;
1245					#size-cells = <0>;
1246					reg = <1>;
1247
1248					tcon_tv1_out_tcon_top: endpoint@1 {
1249						reg = <1>;
1250						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
1251					};
1252				};
1253			};
1254		};
1255
1256		gic: interrupt-controller@1c81000 {
1257			compatible = "arm,gic-400";
1258			reg = <0x01c81000 0x1000>,
1259			      <0x01c82000 0x2000>,
1260			      <0x01c84000 0x2000>,
1261			      <0x01c86000 0x2000>;
1262			interrupt-controller;
1263			#interrupt-cells = <3>;
1264			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
1265		};
1266
1267		hdmi: hdmi@1ee0000 {
1268			compatible = "allwinner,sun8i-r40-dw-hdmi",
1269				     "allwinner,sun8i-a83t-dw-hdmi";
1270			reg = <0x01ee0000 0x10000>;
1271			reg-io-width = <1>;
1272			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
1273			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
1274				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
1275			clock-names = "iahb", "isfr", "tmds", "cec";
1276			resets = <&ccu RST_BUS_HDMI1>;
1277			reset-names = "ctrl";
1278			phys = <&hdmi_phy>;
1279			phy-names = "phy";
1280			status = "disabled";
1281
1282			ports {
1283				#address-cells = <1>;
1284				#size-cells = <0>;
1285
1286				hdmi_in: port@0 {
1287					reg = <0>;
1288
1289					hdmi_in_tcon_top: endpoint {
1290						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
1291					};
1292				};
1293
1294				hdmi_out: port@1 {
1295					reg = <1>;
1296				};
1297			};
1298		};
1299
1300		hdmi_phy: hdmi-phy@1ef0000 {
1301			compatible = "allwinner,sun8i-r40-hdmi-phy";
1302			reg = <0x01ef0000 0x10000>;
1303			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
1304				 <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
1305			clock-names = "bus", "mod", "pll-0", "pll-1";
1306			resets = <&ccu RST_BUS_HDMI0>;
1307			reset-names = "phy";
1308			#phy-cells = <0>;
1309		};
1310	};
1311
1312	pmu {
1313		compatible = "arm,cortex-a7-pmu";
1314		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1315			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
1316			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
1317			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
1318		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
1319	};
1320
1321	timer {
1322		compatible = "arm,armv7-timer";
1323		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1324			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1325			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1326			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
1327	};
1328};
1329