1/*
2 * Copyright 2015 Marcus Cooper <codekipper@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun6i-a31.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48
49/ {
50	model = "Mele I7 Quad top set box";
51	compatible = "mele,i7", "allwinner,sun6i-a31";
52
53	aliases {
54		serial0 = &uart0;
55	};
56
57	chosen {
58		stdout-path = "serial0:115200n8";
59	};
60
61	hdmi-connector {
62		compatible = "hdmi-connector";
63		type = "a";
64
65		port {
66			hdmi_con_in: endpoint {
67				remote-endpoint = <&hdmi_out_con>;
68			};
69		};
70	};
71
72	leds {
73		compatible = "gpio-leds";
74
75		led {
76			label = "i7:blue:usr";
77			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
78		};
79	};
80
81	sound {
82		compatible = "simple-audio-card";
83		simple-audio-card,name = "On-board SPDIF";
84		simple-audio-card,cpu {
85			sound-dai = <&spdif>;
86		};
87
88		simple-audio-card,codec {
89			sound-dai = <&spdif_out>;
90		};
91	};
92
93	spdif_out: spdif-out {
94		#sound-dai-cells = <0>;
95		compatible = "linux,spdif-dit";
96	};
97};
98
99&codec {
100	allwinner,audio-routing =
101		"Headphone", "HP";
102	status = "okay";
103};
104
105&de {
106	status = "okay";
107};
108
109&ehci0 {
110	status = "okay";
111};
112
113&ehci1 {
114	status = "okay";
115};
116
117&gmac {
118	pinctrl-names = "default";
119	pinctrl-0 = <&gmac_mii_pins>;
120	phy-handle = <&phy1>;
121	phy-mode = "mii";
122	status = "okay";
123};
124
125&hdmi {
126	status = "okay";
127};
128
129&hdmi_out {
130	hdmi_out_con: endpoint {
131		remote-endpoint = <&hdmi_con_in>;
132	};
133};
134
135&ir {
136	pinctrl-names = "default";
137	pinctrl-0 = <&s_ir_rx_pin>;
138	status = "okay";
139};
140
141&mdio {
142	phy1: ethernet-phy@1 {
143		reg = <1>;
144	};
145};
146
147&mmc0 {
148	vmmc-supply = <&reg_vcc3v3>;
149	bus-width = <4>;
150	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
151	status = "okay";
152};
153
154&reg_usb1_vbus {
155	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
156	status = "okay";
157};
158
159&spdif {
160	pinctrl-names = "default";
161	pinctrl-0 = <&spdif_tx_pin>;
162	status = "okay";
163};
164
165&tcon0 {
166	status = "okay";
167};
168
169&uart0 {
170	pinctrl-names = "default";
171	pinctrl-0 = <&uart0_ph_pins>;
172	status = "okay";
173};
174
175&usbphy {
176	usb1_vbus-supply = <&reg_usb1_vbus>;
177	status = "okay";
178};
179