1/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
2/*
3 * INET		An implementation of the TCP/IP protocol suite for the LINUX
4 *		operating system.  INET is implemented using the  BSD Socket
5 *		interface as the means of communication with the user level.
6 *
7 *		Definitions of the socket-level I/O control calls.
8 *
9 * Version:	@(#)sockios.h	1.0.2	03/09/93
10 *
11 * Authors:	Ross Biro
12 *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
13 *
14 *		This program is free software; you can redistribute it and/or
15 *		modify it under the terms of the GNU General Public License
16 *		as published by the Free Software Foundation; either version
17 *		2 of the License, or (at your option) any later version.
18 */
19#ifndef _LINUX_SOCKIOS_H
20#define _LINUX_SOCKIOS_H
21
22#include <asm/bitsperlong.h>
23#include <asm/sockios.h>
24
25/* Linux-specific socket ioctls */
26#define SIOCINQ		FIONREAD
27#define SIOCOUTQ	TIOCOUTQ        /* output queue size (not sent + not acked) */
28
29#define SOCK_IOC_TYPE	0x89
30
31/*
32 * the timeval/timespec data structure layout is defined by libc,
33 * so we need to cover both possible versions on 32-bit.
34 */
35/* Get stamp (timeval) */
36#define SIOCGSTAMP_NEW	 _IOR(SOCK_IOC_TYPE, 0x06, long long[2])
37/* Get stamp (timespec) */
38#define SIOCGSTAMPNS_NEW _IOR(SOCK_IOC_TYPE, 0x07, long long[2])
39
40#if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__))
41/* on 64-bit and x32, avoid the ?: operator */
42#define SIOCGSTAMP	SIOCGSTAMP_OLD
43#define SIOCGSTAMPNS	SIOCGSTAMPNS_OLD
44#else
45#define SIOCGSTAMP	((sizeof(struct timeval))  == 8 ? \
46			 SIOCGSTAMP_OLD   : SIOCGSTAMP_NEW)
47#define SIOCGSTAMPNS	((sizeof(struct timespec)) == 8 ? \
48			 SIOCGSTAMPNS_OLD : SIOCGSTAMPNS_NEW)
49#endif
50
51/* Routing table calls. */
52#define SIOCADDRT	0x890B		/* add routing table entry	*/
53#define SIOCDELRT	0x890C		/* delete routing table entry	*/
54#define SIOCRTMSG	0x890D		/* unused			*/
55
56/* Socket configuration controls. */
57#define SIOCGIFNAME	0x8910		/* get iface name		*/
58#define SIOCSIFLINK	0x8911		/* set iface channel		*/
59#define SIOCGIFCONF	0x8912		/* get iface list		*/
60#define SIOCGIFFLAGS	0x8913		/* get flags			*/
61#define SIOCSIFFLAGS	0x8914		/* set flags			*/
62#define SIOCGIFADDR	0x8915		/* get PA address		*/
63#define SIOCSIFADDR	0x8916		/* set PA address		*/
64#define SIOCGIFDSTADDR	0x8917		/* get remote PA address	*/
65#define SIOCSIFDSTADDR	0x8918		/* set remote PA address	*/
66#define SIOCGIFBRDADDR	0x8919		/* get broadcast PA address	*/
67#define SIOCSIFBRDADDR	0x891a		/* set broadcast PA address	*/
68#define SIOCGIFNETMASK	0x891b		/* get network PA mask		*/
69#define SIOCSIFNETMASK	0x891c		/* set network PA mask		*/
70#define SIOCGIFMETRIC	0x891d		/* get metric			*/
71#define SIOCSIFMETRIC	0x891e		/* set metric			*/
72#define SIOCGIFMEM	0x891f		/* get memory address (BSD)	*/
73#define SIOCSIFMEM	0x8920		/* set memory address (BSD)	*/
74#define SIOCGIFMTU	0x8921		/* get MTU size			*/
75#define SIOCSIFMTU	0x8922		/* set MTU size			*/
76#define SIOCSIFNAME	0x8923		/* set interface name */
77#define	SIOCSIFHWADDR	0x8924		/* set hardware address 	*/
78#define SIOCGIFENCAP	0x8925		/* get/set encapsulations       */
79#define SIOCSIFENCAP	0x8926
80#define SIOCGIFHWADDR	0x8927		/* Get hardware address		*/
81#define SIOCGIFSLAVE	0x8929		/* Driver slaving support	*/
82#define SIOCSIFSLAVE	0x8930
83#define SIOCADDMULTI	0x8931		/* Multicast address lists	*/
84#define SIOCDELMULTI	0x8932
85#define SIOCGIFINDEX	0x8933		/* name -> if_index mapping	*/
86#define SIOGIFINDEX	SIOCGIFINDEX	/* misprint compatibility :-)	*/
87#define SIOCSIFPFLAGS	0x8934		/* set/get extended flags set	*/
88#define SIOCGIFPFLAGS	0x8935
89#define SIOCDIFADDR	0x8936		/* delete PA address		*/
90#define	SIOCSIFHWBROADCAST	0x8937	/* set hardware broadcast addr	*/
91#define SIOCGIFCOUNT	0x8938		/* get number of devices */
92
93#define SIOCGIFBR	0x8940		/* Bridging support		*/
94#define SIOCSIFBR	0x8941		/* Set bridging options 	*/
95
96#define SIOCGIFTXQLEN	0x8942		/* Get the tx queue length	*/
97#define SIOCSIFTXQLEN	0x8943		/* Set the tx queue length 	*/
98
99/* SIOCGIFDIVERT was:	0x8944		Frame diversion support */
100/* SIOCSIFDIVERT was:	0x8945		Set frame diversion options */
101
102#define SIOCETHTOOL	0x8946		/* Ethtool interface		*/
103
104#define SIOCGMIIPHY	0x8947		/* Get address of MII PHY in use. */
105#define SIOCGMIIREG	0x8948		/* Read MII PHY register.	*/
106#define SIOCSMIIREG	0x8949		/* Write MII PHY register.	*/
107
108#define SIOCWANDEV	0x894A		/* get/set netdev parameters	*/
109
110#define SIOCOUTQNSD	0x894B		/* output queue size (not sent only) */
111#define SIOCGSKNS	0x894C		/* get socket network namespace */
112
113/* ARP cache control calls. */
114		    /*  0x8950 - 0x8952  * obsolete calls, don't re-use */
115#define SIOCDARP	0x8953		/* delete ARP table entry	*/
116#define SIOCGARP	0x8954		/* get ARP table entry		*/
117#define SIOCSARP	0x8955		/* set ARP table entry		*/
118
119/* RARP cache control calls. */
120#define SIOCDRARP	0x8960		/* delete RARP table entry	*/
121#define SIOCGRARP	0x8961		/* get RARP table entry		*/
122#define SIOCSRARP	0x8962		/* set RARP table entry		*/
123
124/* Driver configuration calls */
125
126#define SIOCGIFMAP	0x8970		/* Get device parameters	*/
127#define SIOCSIFMAP	0x8971		/* Set device parameters	*/
128
129/* DLCI configuration calls */
130
131#define SIOCADDDLCI	0x8980		/* Create new DLCI device	*/
132#define SIOCDELDLCI	0x8981		/* Delete DLCI device		*/
133
134#define SIOCGIFVLAN	0x8982		/* 802.1Q VLAN support		*/
135#define SIOCSIFVLAN	0x8983		/* Set 802.1Q VLAN options 	*/
136
137/* bonding calls */
138
139#define SIOCBONDENSLAVE	0x8990		/* enslave a device to the bond */
140#define SIOCBONDRELEASE 0x8991		/* release a slave from the bond*/
141#define SIOCBONDSETHWADDR      0x8992	/* set the hw addr of the bond  */
142#define SIOCBONDSLAVEINFOQUERY 0x8993   /* rtn info about slave state   */
143#define SIOCBONDINFOQUERY      0x8994	/* rtn info about bond state    */
144#define SIOCBONDCHANGEACTIVE   0x8995   /* update to a new active slave */
145
146/* bridge calls */
147#define SIOCBRADDBR     0x89a0		/* create new bridge device     */
148#define SIOCBRDELBR     0x89a1		/* remove bridge device         */
149#define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
150#define SIOCBRDELIF	0x89a3		/* remove interface from bridge */
151
152/* hardware time stamping: parameters in linux/net_tstamp.h */
153#define SIOCSHWTSTAMP	0x89b0		/* set and get config		*/
154#define SIOCGHWTSTAMP	0x89b1		/* get config			*/
155
156/* Device private ioctl calls */
157
158/*
159 *	These 16 ioctls are available to devices via the do_ioctl() device
160 *	vector. Each device should include this file and redefine these names
161 *	as their own. Because these are device dependent it is a good idea
162 *	_NOT_ to issue them to random objects and hope.
163 *
164 *	THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM
165 */
166
167#define SIOCDEVPRIVATE	0x89F0	/* to 89FF */
168
169/*
170 *	These 16 ioctl calls are protocol private
171 */
172
173#define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */
174#endif	/* _LINUX_SOCKIOS_H */
175