1// SPDX-License-Identifier: GPL-2.0 2/* 3 * USB Serial Converter stuff 4 * 5 * Copyright (C) 1999 - 2012 6 * Greg Kroah-Hartman (greg@kroah.com) 7 */ 8 9#ifndef __LINUX_USB_SERIAL_H 10#define __LINUX_USB_SERIAL_H 11 12#include <linux/kref.h> 13#include <linux/mutex.h> 14#include <linux/serial.h> 15#include <linux/kfifo.h> 16 17/* The maximum number of ports one device can grab at once */ 18#define MAX_NUM_PORTS 16 19 20/* USB serial flags */ 21#define USB_SERIAL_WRITE_BUSY 0 22#define USB_SERIAL_THROTTLED 1 23 24/** 25 * usb_serial_port: structure for the specific ports of a device. 26 * @serial: pointer back to the struct usb_serial owner of this port. 27 * @port: pointer to the corresponding tty_port for this port. 28 * @lock: spinlock to grab when updating portions of this structure. 29 * @minor: the minor number of the port 30 * @port_number: the struct usb_serial port number of this port (starts at 0) 31 * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. 32 * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. 33 * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe 34 * for this port. 35 * @interrupt_out_buffer: pointer to the interrupt out buffer for this port. 36 * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes. 37 * @interrupt_out_urb: pointer to the interrupt out struct urb for this port. 38 * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe 39 * for this port. 40 * @bulk_in_buffer: pointer to the bulk in buffer for this port. 41 * @bulk_in_size: the size of the bulk_in_buffer, in bytes. 42 * @read_urb: pointer to the bulk in struct urb for this port. 43 * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this 44 * port. 45 * @bulk_in_buffers: pointers to the bulk in buffers for this port 46 * @read_urbs: pointers to the bulk in urbs for this port 47 * @read_urbs_free: status bitmap the for bulk in urbs 48 * @bulk_out_buffer: pointer to the bulk out buffer for this port. 49 * @bulk_out_size: the size of the bulk_out_buffer, in bytes. 50 * @write_urb: pointer to the bulk out struct urb for this port. 51 * @write_fifo: kfifo used to buffer outgoing data 52 * @bulk_out_buffers: pointers to the bulk out buffers for this port 53 * @write_urbs: pointers to the bulk out urbs for this port 54 * @write_urbs_free: status bitmap the for bulk out urbs 55 * @icount: interrupt counters 56 * @tx_bytes: number of bytes currently in host stack queues 57 * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this 58 * port. 59 * @flags: usb serial port flags 60 * @work: work queue entry for the line discipline waking up. 61 * @dev: pointer to the serial device 62 * 63 * This structure is used by the usb-serial core and drivers for the specific 64 * ports of a device. 65 */ 66struct usb_serial_port { 67 struct usb_serial *serial; 68 struct tty_port port; 69 spinlock_t lock; 70 u32 minor; 71 u8 port_number; 72 73 unsigned char *interrupt_in_buffer; 74 struct urb *interrupt_in_urb; 75 __u8 interrupt_in_endpointAddress; 76 77 unsigned char *interrupt_out_buffer; 78 int interrupt_out_size; 79 struct urb *interrupt_out_urb; 80 __u8 interrupt_out_endpointAddress; 81 82 unsigned char *bulk_in_buffer; 83 int bulk_in_size; 84 struct urb *read_urb; 85 __u8 bulk_in_endpointAddress; 86 87 unsigned char *bulk_in_buffers[2]; 88 struct urb *read_urbs[2]; 89 unsigned long read_urbs_free; 90 91 unsigned char *bulk_out_buffer; 92 int bulk_out_size; 93 struct urb *write_urb; 94 struct kfifo write_fifo; 95 96 unsigned char *bulk_out_buffers[2]; 97 struct urb *write_urbs[2]; 98 unsigned long write_urbs_free; 99 __u8 bulk_out_endpointAddress; 100 101 struct async_icount icount; 102 int tx_bytes; 103 104 unsigned long flags; 105 struct work_struct work; 106 unsigned long sysrq; /* sysrq timeout */ 107 struct device dev; 108}; 109#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) 110 111/* get and set the port private data pointer helper functions */ 112static inline void *usb_get_serial_port_data(struct usb_serial_port *port) 113{ 114 return dev_get_drvdata(&port->dev); 115} 116 117static inline void usb_set_serial_port_data(struct usb_serial_port *port, 118 void *data) 119{ 120 dev_set_drvdata(&port->dev, data); 121} 122 123/** 124 * usb_serial - structure used by the usb-serial core for a device 125 * @dev: pointer to the struct usb_device for this device 126 * @type: pointer to the struct usb_serial_driver for this device 127 * @interface: pointer to the struct usb_interface for this device 128 * @sibling: pointer to the struct usb_interface of any sibling interface 129 * @suspend_count: number of suspended (sibling) interfaces 130 * @num_ports: the number of ports this device has 131 * @num_interrupt_in: number of interrupt in endpoints we have 132 * @num_interrupt_out: number of interrupt out endpoints we have 133 * @num_bulk_in: number of bulk in endpoints we have 134 * @num_bulk_out: number of bulk out endpoints we have 135 * @port: array of struct usb_serial_port structures for the different ports. 136 * @private: place to put any driver specific information that is needed. The 137 * usb-serial driver is required to manage this data, the usb-serial core 138 * will not touch this. Use usb_get_serial_data() and 139 * usb_set_serial_data() to access this. 140 */ 141struct usb_serial { 142 struct usb_device *dev; 143 struct usb_serial_driver *type; 144 struct usb_interface *interface; 145 struct usb_interface *sibling; 146 unsigned int suspend_count; 147 unsigned char disconnected:1; 148 unsigned char attached:1; 149 unsigned char minors_reserved:1; 150 unsigned char num_ports; 151 unsigned char num_port_pointers; 152 unsigned char num_interrupt_in; 153 unsigned char num_interrupt_out; 154 unsigned char num_bulk_in; 155 unsigned char num_bulk_out; 156 struct usb_serial_port *port[MAX_NUM_PORTS]; 157 struct kref kref; 158 struct mutex disc_mutex; 159 void *private; 160}; 161#define to_usb_serial(d) container_of(d, struct usb_serial, kref) 162 163/* get and set the serial private data pointer helper functions */ 164static inline void *usb_get_serial_data(struct usb_serial *serial) 165{ 166 return serial->private; 167} 168 169static inline void usb_set_serial_data(struct usb_serial *serial, void *data) 170{ 171 serial->private = data; 172} 173 174struct usb_serial_endpoints { 175 unsigned char num_bulk_in; 176 unsigned char num_bulk_out; 177 unsigned char num_interrupt_in; 178 unsigned char num_interrupt_out; 179 struct usb_endpoint_descriptor *bulk_in[MAX_NUM_PORTS]; 180 struct usb_endpoint_descriptor *bulk_out[MAX_NUM_PORTS]; 181 struct usb_endpoint_descriptor *interrupt_in[MAX_NUM_PORTS]; 182 struct usb_endpoint_descriptor *interrupt_out[MAX_NUM_PORTS]; 183}; 184 185/** 186 * usb_serial_driver - describes a usb serial driver 187 * @description: pointer to a string that describes this driver. This string 188 * used in the syslog messages when a device is inserted or removed. 189 * @id_table: pointer to a list of usb_device_id structures that define all 190 * of the devices this structure can support. 191 * @num_ports: the number of different ports this device will have. 192 * @num_bulk_in: minimum number of bulk-in endpoints 193 * @num_bulk_out: minimum number of bulk-out endpoints 194 * @num_interrupt_in: minimum number of interrupt-in endpoints 195 * @num_interrupt_out: minimum number of interrupt-out endpoints 196 * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer 197 * (0 = end-point size) 198 * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size) 199 * @calc_num_ports: pointer to a function to determine how many ports this 200 * device has dynamically. It can also be used to verify the number of 201 * endpoints or to modify the port-endpoint mapping. It will be called 202 * after the probe() callback is called, but before attach(). 203 * @probe: pointer to the driver's probe function. 204 * This will be called when the device is inserted into the system, 205 * but before the device has been fully initialized by the usb_serial 206 * subsystem. Use this function to download any firmware to the device, 207 * or any other early initialization that might be needed. 208 * Return 0 to continue on with the initialization sequence. Anything 209 * else will abort it. 210 * @attach: pointer to the driver's attach function. 211 * This will be called when the struct usb_serial structure is fully 212 * set up. Do any local initialization of the device, or any private 213 * memory structure allocation at this point in time. 214 * @disconnect: pointer to the driver's disconnect function. This will be 215 * called when the device is unplugged or unbound from the driver. 216 * @release: pointer to the driver's release function. This will be called 217 * when the usb_serial data structure is about to be destroyed. 218 * @usb_driver: pointer to the struct usb_driver that controls this 219 * device. This is necessary to allow dynamic ids to be added to 220 * the driver from sysfs. 221 * 222 * This structure is defines a USB Serial driver. It provides all of 223 * the information that the USB serial core code needs. If the function 224 * pointers are defined, then the USB serial core code will call them when 225 * the corresponding tty port functions are called. If they are not 226 * called, the generic serial function will be used instead. 227 * 228 * The driver.owner field should be set to the module owner of this driver. 229 * The driver.name field should be set to the name of this driver (remember 230 * it will show up in sysfs, so it needs to be short and to the point. 231 * Using the module name is a good idea.) 232 */ 233struct usb_serial_driver { 234 const char *description; 235 const struct usb_device_id *id_table; 236 237 struct list_head driver_list; 238 struct device_driver driver; 239 struct usb_driver *usb_driver; 240 struct usb_dynids dynids; 241 242 unsigned char num_ports; 243 244 unsigned char num_bulk_in; 245 unsigned char num_bulk_out; 246 unsigned char num_interrupt_in; 247 unsigned char num_interrupt_out; 248 249 size_t bulk_in_size; 250 size_t bulk_out_size; 251 252 int (*probe)(struct usb_serial *serial, const struct usb_device_id *id); 253 int (*attach)(struct usb_serial *serial); 254 int (*calc_num_ports)(struct usb_serial *serial, 255 struct usb_serial_endpoints *epds); 256 257 void (*disconnect)(struct usb_serial *serial); 258 void (*release)(struct usb_serial *serial); 259 260 int (*port_probe)(struct usb_serial_port *port); 261 void (*port_remove)(struct usb_serial_port *port); 262 263 int (*suspend)(struct usb_serial *serial, pm_message_t message); 264 int (*resume)(struct usb_serial *serial); 265 int (*reset_resume)(struct usb_serial *serial); 266 267 /* serial function calls */ 268 /* Called by console and by the tty layer */ 269 int (*open)(struct tty_struct *tty, struct usb_serial_port *port); 270 void (*close)(struct usb_serial_port *port); 271 int (*write)(struct tty_struct *tty, struct usb_serial_port *port, 272 const unsigned char *buf, int count); 273 /* Called only by the tty layer */ 274 unsigned int (*write_room)(struct tty_struct *tty); 275 int (*ioctl)(struct tty_struct *tty, 276 unsigned int cmd, unsigned long arg); 277 void (*get_serial)(struct tty_struct *tty, struct serial_struct *ss); 278 int (*set_serial)(struct tty_struct *tty, struct serial_struct *ss); 279 void (*set_termios)(struct tty_struct *tty, struct usb_serial_port *port, 280 const struct ktermios *old); 281 int (*break_ctl)(struct tty_struct *tty, int break_state); 282 unsigned int (*chars_in_buffer)(struct tty_struct *tty); 283 void (*wait_until_sent)(struct tty_struct *tty, long timeout); 284 bool (*tx_empty)(struct usb_serial_port *port); 285 void (*throttle)(struct tty_struct *tty); 286 void (*unthrottle)(struct tty_struct *tty); 287 int (*tiocmget)(struct tty_struct *tty); 288 int (*tiocmset)(struct tty_struct *tty, 289 unsigned int set, unsigned int clear); 290 int (*tiocmiwait)(struct tty_struct *tty, unsigned long arg); 291 int (*get_icount)(struct tty_struct *tty, 292 struct serial_icounter_struct *icount); 293 /* Called by the tty layer for port level work. There may or may not 294 be an attached tty at this point */ 295 void (*dtr_rts)(struct usb_serial_port *port, int on); 296 int (*carrier_raised)(struct usb_serial_port *port); 297 /* Called by the usb serial hooks to allow the user to rework the 298 termios state */ 299 void (*init_termios)(struct tty_struct *tty); 300 /* USB events */ 301 void (*read_int_callback)(struct urb *urb); 302 void (*write_int_callback)(struct urb *urb); 303 void (*read_bulk_callback)(struct urb *urb); 304 void (*write_bulk_callback)(struct urb *urb); 305 /* Called by the generic read bulk callback */ 306 void (*process_read_urb)(struct urb *urb); 307 /* Called by the generic write implementation */ 308 int (*prepare_write_buffer)(struct usb_serial_port *port, 309 void *dest, size_t size); 310}; 311#define to_usb_serial_driver(d) \ 312 container_of(d, struct usb_serial_driver, driver) 313 314int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[], 315 const char *name, const struct usb_device_id *id_table); 316void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[]); 317void usb_serial_port_softint(struct usb_serial_port *port); 318 319int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); 320int usb_serial_resume(struct usb_interface *intf); 321 322/* USB Serial console functions */ 323#ifdef CONFIG_USB_SERIAL_CONSOLE 324void usb_serial_console_init(int minor); 325void usb_serial_console_exit(void); 326void usb_serial_console_disconnect(struct usb_serial *serial); 327#else 328static inline void usb_serial_console_init(int minor) { } 329static inline void usb_serial_console_exit(void) { } 330static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} 331#endif 332 333/* Functions needed by other parts of the usbserial core */ 334struct usb_serial_port *usb_serial_port_get_by_minor(unsigned int minor); 335void usb_serial_put(struct usb_serial *serial); 336 337int usb_serial_claim_interface(struct usb_serial *serial, struct usb_interface *intf); 338 339int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port); 340int usb_serial_generic_write_start(struct usb_serial_port *port, gfp_t mem_flags); 341int usb_serial_generic_write(struct tty_struct *tty, struct usb_serial_port *port, 342 const unsigned char *buf, int count); 343void usb_serial_generic_close(struct usb_serial_port *port); 344int usb_serial_generic_resume(struct usb_serial *serial); 345unsigned int usb_serial_generic_write_room(struct tty_struct *tty); 346unsigned int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); 347void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout); 348void usb_serial_generic_read_bulk_callback(struct urb *urb); 349void usb_serial_generic_write_bulk_callback(struct urb *urb); 350void usb_serial_generic_throttle(struct tty_struct *tty); 351void usb_serial_generic_unthrottle(struct tty_struct *tty); 352int usb_serial_generic_tiocmiwait(struct tty_struct *tty, unsigned long arg); 353int usb_serial_generic_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount); 354int usb_serial_generic_register(void); 355void usb_serial_generic_deregister(void); 356int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port, gfp_t mem_flags); 357void usb_serial_generic_process_read_urb(struct urb *urb); 358int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port, void *dest, size_t size); 359 360#if defined(CONFIG_USB_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) 361int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch); 362int usb_serial_handle_break(struct usb_serial_port *port); 363#else 364static inline int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch) 365{ 366 return 0; 367} 368static inline int usb_serial_handle_break(struct usb_serial_port *port) 369{ 370 return 0; 371} 372#endif 373 374void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, 375 struct tty_struct *tty, unsigned int status); 376 377 378int usb_serial_bus_register(struct usb_serial_driver *device); 379void usb_serial_bus_deregister(struct usb_serial_driver *device); 380 381extern const struct bus_type usb_serial_bus_type; 382extern struct tty_driver *usb_serial_tty_driver; 383 384static inline void usb_serial_debug_data(struct device *dev, 385 const char *function, int size, 386 const unsigned char *data) 387{ 388 dev_dbg(dev, "%s - length = %d, data = %*ph\n", 389 function, size, size, data); 390} 391 392/* 393 * Macro for reporting errors in write path to avoid infinite loop 394 * when port is used as a console. 395 */ 396#define dev_err_console(usport, fmt, ...) \ 397do { \ 398 static bool __print_once; \ 399 struct usb_serial_port *__port = (usport); \ 400 \ 401 if (!__port->port.console || !__print_once) { \ 402 __print_once = true; \ 403 dev_err(&__port->dev, fmt, ##__VA_ARGS__); \ 404 } \ 405} while (0) 406 407/* 408 * module_usb_serial_driver() - Helper macro for registering a USB Serial driver 409 * @__serial_drivers: list of usb_serial drivers to register 410 * @__ids: all device ids that @__serial_drivers bind to 411 * 412 * Helper macro for USB serial drivers which do not do anything special 413 * in module init/exit. This eliminates a lot of boilerplate. Each 414 * module may only use this macro once, and calling it replaces 415 * module_init() and module_exit() 416 * 417 */ 418#define usb_serial_module_driver(__name, __serial_drivers, __ids) \ 419static int __init usb_serial_module_init(void) \ 420{ \ 421 return usb_serial_register_drivers(__serial_drivers, \ 422 __name, __ids); \ 423} \ 424module_init(usb_serial_module_init); \ 425static void __exit usb_serial_module_exit(void) \ 426{ \ 427 usb_serial_deregister_drivers(__serial_drivers); \ 428} \ 429module_exit(usb_serial_module_exit); 430 431#define module_usb_serial_driver(__serial_drivers, __ids) \ 432 usb_serial_module_driver(KBUILD_MODNAME, __serial_drivers, __ids) 433 434#endif /* __LINUX_USB_SERIAL_H */ 435 436