1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Copyright (c) 2001-2002 by David Brownell 4 */ 5 6#ifndef __LINUX_USB_EHCI_DEF_H 7#define __LINUX_USB_EHCI_DEF_H 8 9#include <linux/usb/ehci-dbgp.h> 10 11/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ 12 13/* Section 2.2 Host Controller Capability Registers */ 14struct ehci_caps { 15 /* these fields are specified as 8 and 16 bit registers, 16 * but some hosts can't perform 8 or 16 bit PCI accesses. 17 * some hosts treat caplength and hciversion as parts of a 32-bit 18 * register, others treat them as two separate registers, this 19 * affects the memory map for big endian controllers. 20 */ 21 u32 hc_capbase; 22#define HC_LENGTH(ehci, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \ 23 (ehci_big_endian_capbase(ehci) ? 24 : 0))) 24#define HC_VERSION(ehci, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \ 25 (ehci_big_endian_capbase(ehci) ? 0 : 16))) 26 u32 hcs_params; /* HCSPARAMS - offset 0x4 */ 27#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ 28#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ 29#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ 30#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ 31#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ 32#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ 33#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ 34#define HCS_N_PORTS_MAX 15 /* N_PORTS valid 0x1-0xF */ 35 36 u32 hcc_params; /* HCCPARAMS - offset 0x8 */ 37/* EHCI 1.1 addendum */ 38#define HCC_32FRAME_PERIODIC_LIST(p) ((p)&(1 << 19)) 39#define HCC_PER_PORT_CHANGE_EVENT(p) ((p)&(1 << 18)) 40#define HCC_LPM(p) ((p)&(1 << 17)) 41#define HCC_HW_PREFETCH(p) ((p)&(1 << 16)) 42 43#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ 44#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ 45#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ 46#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ 47#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ 48#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ 49 u8 portroute[8]; /* nibbles for routing - offset 0xC */ 50}; 51 52 53/* Section 2.3 Host Controller Operational Registers */ 54struct ehci_regs { 55 56 /* USBCMD: offset 0x00 */ 57 u32 command; 58 59/* EHCI 1.1 addendum */ 60#define CMD_HIRD (0xf<<24) /* host initiated resume duration */ 61#define CMD_PPCEE (1<<15) /* per port change event enable */ 62#define CMD_FSP (1<<14) /* fully synchronized prefetch */ 63#define CMD_ASPE (1<<13) /* async schedule prefetch enable */ 64#define CMD_PSPE (1<<12) /* periodic schedule prefetch enable */ 65/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ 66#define CMD_PARK (1<<11) /* enable "park" on async qh */ 67#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ 68#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ 69#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ 70#define CMD_ASE (1<<5) /* async schedule enable */ 71#define CMD_PSE (1<<4) /* periodic schedule enable */ 72/* 3:2 is periodic frame list size */ 73#define CMD_RESET (1<<1) /* reset HC not bus */ 74#define CMD_RUN (1<<0) /* start/stop HC */ 75 76 /* USBSTS: offset 0x04 */ 77 u32 status; 78#define STS_PPCE_MASK (0xff<<16) /* Per-Port change event 1-16 */ 79#define STS_ASS (1<<15) /* Async Schedule Status */ 80#define STS_PSS (1<<14) /* Periodic Schedule Status */ 81#define STS_RECL (1<<13) /* Reclamation */ 82#define STS_HALT (1<<12) /* Not running (any reason) */ 83/* some bits reserved */ 84 /* these STS_* flags are also intr_enable bits (USBINTR) */ 85#define STS_IAA (1<<5) /* Interrupted on async advance */ 86#define STS_FATAL (1<<4) /* such as some PCI access errors */ 87#define STS_FLR (1<<3) /* frame list rolled over */ 88#define STS_PCD (1<<2) /* port change detect */ 89#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ 90#define STS_INT (1<<0) /* "normal" completion (short, ...) */ 91 92 /* USBINTR: offset 0x08 */ 93 u32 intr_enable; 94 95 /* FRINDEX: offset 0x0C */ 96 u32 frame_index; /* current microframe number */ 97 /* CTRLDSSEGMENT: offset 0x10 */ 98 u32 segment; /* address bits 63:32 if needed */ 99 /* PERIODICLISTBASE: offset 0x14 */ 100 u32 frame_list; /* points to periodic list */ 101 /* ASYNCLISTADDR: offset 0x18 */ 102 u32 async_next; /* address of next async queue head */ 103 104 u32 reserved1[2]; 105 106 /* TXFILLTUNING: offset 0x24 */ 107 u32 txfill_tuning; /* TX FIFO Tuning register */ 108#define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ 109 110 u32 reserved2[6]; 111 112 /* CONFIGFLAG: offset 0x40 */ 113 u32 configured_flag; 114#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ 115 116 union { 117 /* PORTSC: offset 0x44 */ 118 u32 port_status[HCS_N_PORTS_MAX]; /* up to N_PORTS */ 119/* EHCI 1.1 addendum */ 120#define PORTSC_SUSPEND_STS_ACK 0 121#define PORTSC_SUSPEND_STS_NYET 1 122#define PORTSC_SUSPEND_STS_STALL 2 123#define PORTSC_SUSPEND_STS_ERR 3 124 125#define PORT_DEV_ADDR (0x7f<<25) /* device address */ 126#define PORT_SSTS (0x3<<23) /* suspend status */ 127/* 31:23 reserved */ 128#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ 129#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ 130#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ 131/* 19:16 for port testing */ 132#define PORT_TEST(x) (((x)&0xf)<<16) /* Port Test Control */ 133#define PORT_TEST_PKT PORT_TEST(0x4) /* Port Test Control - packet test */ 134#define PORT_TEST_FORCE PORT_TEST(0x5) /* Port Test Control - force enable */ 135#define PORT_LED_OFF (0<<14) 136#define PORT_LED_AMBER (1<<14) 137#define PORT_LED_GREEN (2<<14) 138#define PORT_LED_MASK (3<<14) 139#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ 140#define PORT_POWER (1<<12) /* true: has power (see PPC) */ 141#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */ 142#define PORT_LS_MASK (3<<10) /* Link status (SE0, K or J */ 143/* 9 reserved */ 144#define PORT_LPM (1<<9) /* LPM transaction */ 145#define PORT_RESET (1<<8) /* reset port */ 146#define PORT_SUSPEND (1<<7) /* suspend port */ 147#define PORT_RESUME (1<<6) /* resume it */ 148#define PORT_OCC (1<<5) /* over current change */ 149#define PORT_OC (1<<4) /* over current active */ 150#define PORT_PEC (1<<3) /* port enable change */ 151#define PORT_PE (1<<2) /* port enable */ 152#define PORT_CSC (1<<1) /* connect status change */ 153#define PORT_CONNECT (1<<0) /* device connected */ 154#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) 155 struct { 156 u32 reserved3[9]; 157 /* USBMODE: offset 0x68 */ 158 u32 usbmode; /* USB Device mode */ 159 }; 160#define USBMODE_SDIS (1<<3) /* Stream disable */ 161#define USBMODE_BE (1<<2) /* BE/LE endianness select */ 162#define USBMODE_CM_HC (3<<0) /* host controller mode */ 163#define USBMODE_CM_IDLE (0<<0) /* idle state */ 164 }; 165 166/* Moorestown has some non-standard registers, partially due to the fact that 167 * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to 168 * PORTSCx 169 */ 170 union { 171 struct { 172 u32 reserved4; 173 /* HOSTPC: offset 0x84 */ 174 u32 hostpc[HCS_N_PORTS_MAX]; 175#define HOSTPC_PHCD (1<<22) /* Phy clock disable */ 176#define HOSTPC_PSPD (3<<25) /* Port speed detection */ 177 }; 178 179 /* Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x80 */ 180 u32 brcm_insnreg[4]; 181 }; 182 183 u32 reserved5[2]; 184 185 /* USBMODE_EX: offset 0xc8 */ 186 u32 usbmode_ex; /* USB Device mode extension */ 187#define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */ 188#define USBMODE_EX_HC (3<<0) /* host controller mode */ 189}; 190 191#endif /* __LINUX_USB_EHCI_DEF_H */ 192