1/* SPDX-License-Identifier: GPL-2.0 */ 2#ifndef LINUX_BCMA_DRIVER_PCI_H_ 3#define LINUX_BCMA_DRIVER_PCI_H_ 4 5#include <linux/types.h> 6 7struct pci_dev; 8 9/** PCI core registers. **/ 10#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */ 11#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */ 12#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */ 13#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */ 14#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */ 15#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */ 16#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */ 17#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */ 18#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */ 19#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */ 20#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */ 21#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */ 22#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */ 23#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */ 24#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */ 25#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */ 26#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */ 27#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */ 28#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */ 29#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */ 30#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */ 31#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */ 32#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */ 33#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */ 34#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */ 35#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */ 36#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */ 37#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */ 38#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */ 39#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */ 40#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */ 41#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */ 42#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */ 43#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */ 44#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */ 45#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF 46#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */ 47#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */ 48#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */ 49#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */ 50#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */ 51#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */ 52#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000 53#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */ 54#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 55#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ 56#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 57#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ 58#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ 59#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ 60#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ 61#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 62#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ 63#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ 64#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ 65#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ 66#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ 67#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ 68#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ 69#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ 70#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ 71#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ 72#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ 73#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ 74#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ 75#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ 76#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ 77#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ 78#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ 79#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ 80#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ 81#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ 82#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ 83#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ 84#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal register */ 85#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ 86#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ 87#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ 88#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ 89#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ 90#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ 91#define BCMA_CORE_PCI_SPROM_PI_OFFSET 0 /* first word */ 92#define BCMA_CORE_PCI_SPROM_PI_MASK 0xf000 /* bit 15:12 */ 93#define BCMA_CORE_PCI_SPROM_PI_SHIFT 12 /* bit 15:12 */ 94#define BCMA_CORE_PCI_SPROM_MISC_CONFIG 5 /* word 5 */ 95#define BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */ 96#define BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */ 97#define BCMA_CORE_PCI_SPROM_CLKREQ_ENB 0x0800 /* bit 11 */ 98 99/* SBtoPCIx */ 100#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000 101#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001 102#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002 103#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003 104#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */ 105#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */ 106#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */ 107#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */ 108#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */ 109#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ 110#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ 111 112/* PCIE protocol PHY diagnostic registers */ 113#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ 114#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ 115#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ 116#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ 117#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ 118#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ 119#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ 120#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ 121#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ 122#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ 123#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ 124#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ 125#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ 126#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ 127#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ 128#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ 129#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ 130 131/* PCIE protocol DLLP diagnostic registers */ 132#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ 133#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ 134#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ 135#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) 136#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ 137#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ 138#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ 139#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ 140#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ 141#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ 142#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ 143#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ 144#define BCMA_CORE_PCI_ASPMTIMER_EXTEND 0x01000000 /* > rev7: enable extend ASPM timer */ 145#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ 146#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ 147#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ 148#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ 149#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ 150#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ 151#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ 152#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ 153#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ 154#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ 155#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ 156 157/* SERDES RX registers */ 158#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ 159#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ 160#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ 161#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ 162#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ 163#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ 164 165/* SERDES PLL registers */ 166#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ 167#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ 168 169/* PCIcore specific boardflags */ 170#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ 171 172/* PCIE Config space accessing MACROS */ 173#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ 174#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ 175#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ 176#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ 177 178#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ 179#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ 180#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ 181#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ 182 183#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 184 185#define BCMA_CORE_PCI_ 186 187/* MDIO devices (SERDES modules) */ 188#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 189#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 190#define BCMA_CORE_PCI_MDIO_BLK0 0x800 191#define BCMA_CORE_PCI_MDIO_BLK1 0x801 192#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 193#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 194#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 195#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 196#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A 197#define BCMA_CORE_PCI_MDIO_BLK2 0x802 198#define BCMA_CORE_PCI_MDIO_BLK3 0x803 199#define BCMA_CORE_PCI_MDIO_BLK4 0x804 200#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ 201#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 202#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 203#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 204 205/* PCIE Root Capability Register bits (Host mode only) */ 206#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 207 208struct bcma_drv_pci; 209struct bcma_bus; 210 211#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE 212struct bcma_drv_pci_host { 213 struct bcma_drv_pci *pdev; 214 215 u32 host_cfg_addr; 216 spinlock_t cfgspace_lock; 217 218 struct pci_controller pci_controller; 219 struct pci_ops pci_ops; 220 struct resource mem_resource; 221 struct resource io_resource; 222}; 223#endif 224 225struct bcma_drv_pci { 226 struct bcma_device *core; 227 u8 early_setup_done:1; 228 u8 setup_done:1; 229 u8 hostmode:1; 230 231#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE 232 struct bcma_drv_pci_host *host_controller; 233#endif 234}; 235 236/* Register access */ 237#define pcicore_read16(pc, offset) bcma_read16((pc)->core, offset) 238#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) 239#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val) 240#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) 241 242#ifdef CONFIG_BCMA_DRIVER_PCI 243extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up); 244#else 245static inline void bcma_core_pci_power_save(struct bcma_bus *bus, bool up) 246{ 247} 248#endif 249 250#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE 251extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); 252extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); 253#else 254static inline int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) 255{ 256 return -ENOTSUPP; 257} 258static inline int bcma_core_pci_plat_dev_init(struct pci_dev *dev) 259{ 260 return -ENOTSUPP; 261} 262#endif 263 264#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ 265