1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * Defines for Mobile High-Definition Link (MHL) interface 4 * 5 * Copyright (C) 2015, Samsung Electronics, Co., Ltd. 6 * Andrzej Hajda <a.hajda@samsung.com> 7 * 8 * Based on MHL driver for Android devices. 9 * Copyright (C) 2013-2014 Silicon Image, Inc. 10 */ 11 12#ifndef __MHL_H__ 13#define __MHL_H__ 14 15#include <linux/types.h> 16 17/* Device Capabilities Registers */ 18enum { 19 MHL_DCAP_DEV_STATE, 20 MHL_DCAP_MHL_VERSION, 21 MHL_DCAP_CAT, 22 MHL_DCAP_ADOPTER_ID_H, 23 MHL_DCAP_ADOPTER_ID_L, 24 MHL_DCAP_VID_LINK_MODE, 25 MHL_DCAP_AUD_LINK_MODE, 26 MHL_DCAP_VIDEO_TYPE, 27 MHL_DCAP_LOG_DEV_MAP, 28 MHL_DCAP_BANDWIDTH, 29 MHL_DCAP_FEATURE_FLAG, 30 MHL_DCAP_DEVICE_ID_H, 31 MHL_DCAP_DEVICE_ID_L, 32 MHL_DCAP_SCRATCHPAD_SIZE, 33 MHL_DCAP_INT_STAT_SIZE, 34 MHL_DCAP_RESERVED, 35 MHL_DCAP_SIZE 36}; 37 38#define MHL_DCAP_CAT_SINK 0x01 39#define MHL_DCAP_CAT_SOURCE 0x02 40#define MHL_DCAP_CAT_POWER 0x10 41#define MHL_DCAP_CAT_PLIM(x) ((x) << 5) 42 43#define MHL_DCAP_VID_LINK_RGB444 0x01 44#define MHL_DCAP_VID_LINK_YCBCR444 0x02 45#define MHL_DCAP_VID_LINK_YCBCR422 0x04 46#define MHL_DCAP_VID_LINK_PPIXEL 0x08 47#define MHL_DCAP_VID_LINK_ISLANDS 0x10 48#define MHL_DCAP_VID_LINK_VGA 0x20 49#define MHL_DCAP_VID_LINK_16BPP 0x40 50 51#define MHL_DCAP_AUD_LINK_2CH 0x01 52#define MHL_DCAP_AUD_LINK_8CH 0x02 53 54#define MHL_DCAP_VT_GRAPHICS 0x00 55#define MHL_DCAP_VT_PHOTO 0x02 56#define MHL_DCAP_VT_CINEMA 0x04 57#define MHL_DCAP_VT_GAMES 0x08 58#define MHL_DCAP_SUPP_VT 0x80 59 60#define MHL_DCAP_LD_DISPLAY 0x01 61#define MHL_DCAP_LD_VIDEO 0x02 62#define MHL_DCAP_LD_AUDIO 0x04 63#define MHL_DCAP_LD_MEDIA 0x08 64#define MHL_DCAP_LD_TUNER 0x10 65#define MHL_DCAP_LD_RECORD 0x20 66#define MHL_DCAP_LD_SPEAKER 0x40 67#define MHL_DCAP_LD_GUI 0x80 68#define MHL_DCAP_LD_ALL 0xFF 69 70#define MHL_DCAP_FEATURE_RCP_SUPPORT 0x01 71#define MHL_DCAP_FEATURE_RAP_SUPPORT 0x02 72#define MHL_DCAP_FEATURE_SP_SUPPORT 0x04 73#define MHL_DCAP_FEATURE_UCP_SEND_SUPPOR 0x08 74#define MHL_DCAP_FEATURE_UCP_RECV_SUPPORT 0x10 75#define MHL_DCAP_FEATURE_RBP_SUPPORT 0x40 76 77/* Extended Device Capabilities Registers */ 78enum { 79 MHL_XDC_ECBUS_SPEEDS, 80 MHL_XDC_TMDS_SPEEDS, 81 MHL_XDC_ECBUS_ROLES, 82 MHL_XDC_LOG_DEV_MAPX, 83 MHL_XDC_SIZE 84}; 85 86#define MHL_XDC_ECBUS_S_075 0x01 87#define MHL_XDC_ECBUS_S_8BIT 0x02 88#define MHL_XDC_ECBUS_S_12BIT 0x04 89#define MHL_XDC_ECBUS_D_150 0x10 90#define MHL_XDC_ECBUS_D_8BIT 0x20 91 92#define MHL_XDC_TMDS_000 0x00 93#define MHL_XDC_TMDS_150 0x01 94#define MHL_XDC_TMDS_300 0x02 95#define MHL_XDC_TMDS_600 0x04 96 97/* MHL_XDC_ECBUS_ROLES flags */ 98#define MHL_XDC_DEV_HOST 0x01 99#define MHL_XDC_DEV_DEVICE 0x02 100#define MHL_XDC_DEV_CHARGER 0x04 101#define MHL_XDC_HID_HOST 0x08 102#define MHL_XDC_HID_DEVICE 0x10 103 104/* MHL_XDC_LOG_DEV_MAPX flags */ 105#define MHL_XDC_LD_PHONE 0x01 106 107/* Device Status Registers */ 108enum { 109 MHL_DST_CONNECTED_RDY, 110 MHL_DST_LINK_MODE, 111 MHL_DST_VERSION, 112 MHL_DST_SIZE 113}; 114 115/* Offset of DEVSTAT registers */ 116#define MHL_DST_OFFSET 0x30 117#define MHL_DST_REG(name) (MHL_DST_OFFSET + MHL_DST_##name) 118 119#define MHL_DST_CONN_DCAP_RDY 0x01 120#define MHL_DST_CONN_XDEVCAPP_SUPP 0x02 121#define MHL_DST_CONN_POW_STAT 0x04 122#define MHL_DST_CONN_PLIM_STAT_MASK 0x38 123 124#define MHL_DST_LM_CLK_MODE_MASK 0x07 125#define MHL_DST_LM_CLK_MODE_PACKED_PIXEL 0x02 126#define MHL_DST_LM_CLK_MODE_NORMAL 0x03 127#define MHL_DST_LM_PATH_EN_MASK 0x08 128#define MHL_DST_LM_PATH_ENABLED 0x08 129#define MHL_DST_LM_PATH_DISABLED 0x00 130#define MHL_DST_LM_MUTED_MASK 0x10 131 132/* Extended Device Status Registers */ 133enum { 134 MHL_XDS_CURR_ECBUS_MODE, 135 MHL_XDS_AVLINK_MODE_STATUS, 136 MHL_XDS_AVLINK_MODE_CONTROL, 137 MHL_XDS_MULTI_SINK_STATUS, 138 MHL_XDS_SIZE 139}; 140 141/* Offset of XDEVSTAT registers */ 142#define MHL_XDS_OFFSET 0x90 143#define MHL_XDS_REG(name) (MHL_XDS_OFFSET + MHL_XDS_##name) 144 145/* MHL_XDS_REG_CURR_ECBUS_MODE flags */ 146#define MHL_XDS_SLOT_MODE_8BIT 0x00 147#define MHL_XDS_SLOT_MODE_6BIT 0x01 148#define MHL_XDS_ECBUS_S 0x04 149#define MHL_XDS_ECBUS_D 0x08 150 151#define MHL_XDS_LINK_CLOCK_75MHZ 0x00 152#define MHL_XDS_LINK_CLOCK_150MHZ 0x10 153#define MHL_XDS_LINK_CLOCK_300MHZ 0x20 154#define MHL_XDS_LINK_CLOCK_600MHZ 0x30 155 156#define MHL_XDS_LINK_STATUS_NO_SIGNAL 0x00 157#define MHL_XDS_LINK_STATUS_CRU_LOCKED 0x01 158#define MHL_XDS_LINK_STATUS_TMDS_NORMAL 0x02 159#define MHL_XDS_LINK_STATUS_TMDS_RESERVED 0x03 160 161#define MHL_XDS_LINK_RATE_1_5_GBPS 0x00 162#define MHL_XDS_LINK_RATE_3_0_GBPS 0x01 163#define MHL_XDS_LINK_RATE_6_0_GBPS 0x02 164#define MHL_XDS_ATT_CAPABLE 0x08 165 166#define MHL_XDS_SINK_STATUS_1_HPD_LOW 0x00 167#define MHL_XDS_SINK_STATUS_1_HPD_HIGH 0x01 168#define MHL_XDS_SINK_STATUS_2_HPD_LOW 0x00 169#define MHL_XDS_SINK_STATUS_2_HPD_HIGH 0x04 170#define MHL_XDS_SINK_STATUS_3_HPD_LOW 0x00 171#define MHL_XDS_SINK_STATUS_3_HPD_HIGH 0x10 172#define MHL_XDS_SINK_STATUS_4_HPD_LOW 0x00 173#define MHL_XDS_SINK_STATUS_4_HPD_HIGH 0x40 174 175/* Interrupt Registers */ 176enum { 177 MHL_INT_RCHANGE, 178 MHL_INT_DCHANGE, 179 MHL_INT_SIZE 180}; 181 182/* Offset of DEVSTAT registers */ 183#define MHL_INT_OFFSET 0x20 184#define MHL_INT_REG(name) (MHL_INT_OFFSET + MHL_INT_##name) 185 186#define MHL_INT_RC_DCAP_CHG 0x01 187#define MHL_INT_RC_DSCR_CHG 0x02 188#define MHL_INT_RC_REQ_WRT 0x04 189#define MHL_INT_RC_GRT_WRT 0x08 190#define MHL_INT_RC_3D_REQ 0x10 191#define MHL_INT_RC_FEAT_REQ 0x20 192#define MHL_INT_RC_FEAT_COMPLETE 0x40 193 194#define MHL_INT_DC_EDID_CHG 0x02 195 196enum { 197 MHL_ACK = 0x33, /* Command or Data byte acknowledge */ 198 MHL_NACK = 0x34, /* Command or Data byte not acknowledge */ 199 MHL_ABORT = 0x35, /* Transaction abort */ 200 MHL_WRITE_STAT = 0xe0, /* Write one status register */ 201 MHL_SET_INT = 0x60, /* Write one interrupt register */ 202 MHL_READ_DEVCAP_REG = 0x61, /* Read one register */ 203 MHL_GET_STATE = 0x62, /* Read CBUS revision level from follower */ 204 MHL_GET_VENDOR_ID = 0x63, /* Read vendor ID value from follower */ 205 MHL_SET_HPD = 0x64, /* Set Hot Plug Detect in follower */ 206 MHL_CLR_HPD = 0x65, /* Clear Hot Plug Detect in follower */ 207 MHL_SET_CAP_ID = 0x66, /* Set Capture ID for downstream device */ 208 MHL_GET_CAP_ID = 0x67, /* Get Capture ID from downstream device */ 209 MHL_MSC_MSG = 0x68, /* VS command to send RCP sub-commands */ 210 MHL_GET_SC1_ERRORCODE = 0x69, /* Get Vendor-Specific error code */ 211 MHL_GET_DDC_ERRORCODE = 0x6A, /* Get DDC channel command error code */ 212 MHL_GET_MSC_ERRORCODE = 0x6B, /* Get MSC command error code */ 213 MHL_WRITE_BURST = 0x6C, /* Write 1-16 bytes to responder's scratchpad */ 214 MHL_GET_SC3_ERRORCODE = 0x6D, /* Get channel 3 command error code */ 215 MHL_WRITE_XSTAT = 0x70, /* Write one extended status register */ 216 MHL_READ_XDEVCAP_REG = 0x71, /* Read one extended devcap register */ 217 /* let the rest of these float, they are software specific */ 218 MHL_READ_EDID_BLOCK, 219 MHL_SEND_3D_REQ_OR_FEAT_REQ, 220 MHL_READ_DEVCAP, 221 MHL_READ_XDEVCAP 222}; 223 224/* MSC message types */ 225enum { 226 MHL_MSC_MSG_RCP = 0x10, /* RCP sub-command */ 227 MHL_MSC_MSG_RCPK = 0x11, /* RCP Acknowledge sub-command */ 228 MHL_MSC_MSG_RCPE = 0x12, /* RCP Error sub-command */ 229 MHL_MSC_MSG_RAP = 0x20, /* Mode Change Warning sub-command */ 230 MHL_MSC_MSG_RAPK = 0x21, /* MCW Acknowledge sub-command */ 231 MHL_MSC_MSG_RBP = 0x22, /* Remote Button Protocol sub-command */ 232 MHL_MSC_MSG_RBPK = 0x23, /* RBP Acknowledge sub-command */ 233 MHL_MSC_MSG_RBPE = 0x24, /* RBP Error sub-command */ 234 MHL_MSC_MSG_UCP = 0x30, /* UCP sub-command */ 235 MHL_MSC_MSG_UCPK = 0x31, /* UCP Acknowledge sub-command */ 236 MHL_MSC_MSG_UCPE = 0x32, /* UCP Error sub-command */ 237 MHL_MSC_MSG_RUSB = 0x40, /* Request USB host role */ 238 MHL_MSC_MSG_RUSBK = 0x41, /* Acknowledge request for USB host role */ 239 MHL_MSC_MSG_RHID = 0x42, /* Request HID host role */ 240 MHL_MSC_MSG_RHIDK = 0x43, /* Acknowledge request for HID host role */ 241 MHL_MSC_MSG_ATT = 0x50, /* Request attention sub-command */ 242 MHL_MSC_MSG_ATTK = 0x51, /* ATT Acknowledge sub-command */ 243 MHL_MSC_MSG_BIST_TRIGGER = 0x60, 244 MHL_MSC_MSG_BIST_REQUEST_STAT = 0x61, 245 MHL_MSC_MSG_BIST_READY = 0x62, 246 MHL_MSC_MSG_BIST_STOP = 0x63, 247}; 248 249/* RAP action codes */ 250#define MHL_RAP_POLL 0x00 /* Just do an ack */ 251#define MHL_RAP_CONTENT_ON 0x10 /* Turn content stream ON */ 252#define MHL_RAP_CONTENT_OFF 0x11 /* Turn content stream OFF */ 253#define MHL_RAP_CBUS_MODE_DOWN 0x20 254#define MHL_RAP_CBUS_MODE_UP 0x21 255 256/* RAPK status codes */ 257#define MHL_RAPK_NO_ERR 0x00 /* RAP action recognized & supported */ 258#define MHL_RAPK_UNRECOGNIZED 0x01 /* Unknown RAP action code received */ 259#define MHL_RAPK_UNSUPPORTED 0x02 /* Rcvd RAP action code not supported */ 260#define MHL_RAPK_BUSY 0x03 /* Responder too busy to respond */ 261 262/* Bit masks for RCP messages */ 263#define MHL_RCP_KEY_RELEASED_MASK 0x80 264#define MHL_RCP_KEY_ID_MASK 0x7F 265 266/* 267 * Error status codes for RCPE messages 268 */ 269/* No error. (Not allowed in RCPE messages) */ 270#define MHL_RCPE_STATUS_NO_ERROR 0x00 271/* Unsupported/unrecognized key code */ 272#define MHL_RCPE_STATUS_INEFFECTIVE_KEY_CODE 0x01 273/* Responder busy. Initiator may retry message */ 274#define MHL_RCPE_STATUS_BUSY 0x02 275 276/* 277 * Error status codes for RBPE messages 278 */ 279/* No error. (Not allowed in RBPE messages) */ 280#define MHL_RBPE_STATUS_NO_ERROR 0x00 281/* Unsupported/unrecognized button code */ 282#define MHL_RBPE_STATUS_INEFFECTIVE_BUTTON_CODE 0x01 283/* Responder busy. Initiator may retry message */ 284#define MHL_RBPE_STATUS_BUSY 0x02 285 286/* 287 * Error status codes for UCPE messages 288 */ 289/* No error. (Not allowed in UCPE messages) */ 290#define MHL_UCPE_STATUS_NO_ERROR 0x00 291/* Unsupported/unrecognized key code */ 292#define MHL_UCPE_STATUS_INEFFECTIVE_KEY_CODE 0x01 293 294enum mhl_burst_id { 295 MHL_BURST_ID_3D_VIC = 0x10, 296 MHL_BURST_ID_3D_DTD = 0x11, 297 MHL_BURST_ID_HEV_VIC = 0x20, 298 MHL_BURST_ID_HEV_DTDA = 0x21, 299 MHL_BURST_ID_HEV_DTDB = 0x22, 300 MHL_BURST_ID_VC_ASSIGN = 0x38, 301 MHL_BURST_ID_VC_CONFIRM = 0x39, 302 MHL_BURST_ID_AUD_DELAY = 0x40, 303 MHL_BURST_ID_ADT_BURSTID = 0x41, 304 MHL_BURST_ID_BIST_SETUP = 0x51, 305 MHL_BURST_ID_BIST_RETURN_STAT = 0x52, 306 MHL_BURST_ID_EMSC_SUPPORT = 0x61, 307 MHL_BURST_ID_HID_PAYLOAD = 0x62, 308 MHL_BURST_ID_BLK_RCV_BUFFER_INFO = 0x63, 309 MHL_BURST_ID_BITS_PER_PIXEL_FMT = 0x64, 310}; 311 312struct mhl_burst_blk_rcv_buffer_info { 313 __be16 id; 314 __le16 size; 315} __packed; 316 317struct mhl3_burst_header { 318 __be16 id; 319 u8 checksum; 320 u8 total_entries; 321 u8 sequence_index; 322} __packed; 323 324struct mhl_burst_bits_per_pixel_fmt { 325 struct mhl3_burst_header hdr; 326 u8 num_entries; 327 struct { 328 u8 stream_id; 329 u8 pixel_format; 330 } __packed desc[]; 331} __packed; 332 333struct mhl_burst_emsc_support { 334 struct mhl3_burst_header hdr; 335 u8 num_entries; 336 __be16 burst_id[]; 337} __packed; 338 339struct mhl_burst_audio_descr { 340 struct mhl3_burst_header hdr; 341 u8 flags; 342 u8 short_desc[9]; 343} __packed; 344 345/* 346 * MHL3 infoframe related definitions 347 */ 348 349#define MHL3_IEEE_OUI 0x7ca61d 350#define MHL3_INFOFRAME_SIZE 15 351 352enum mhl3_video_format { 353 MHL3_VIDEO_FORMAT_NONE, 354 MHL3_VIDEO_FORMAT_3D, 355 MHL3_VIDEO_FORMAT_MULTI_VIEW, 356 MHL3_VIDEO_FORMAT_DUAL_3D 357}; 358 359enum mhl3_3d_format_type { 360 MHL3_3D_FORMAT_TYPE_FS, /* frame sequential */ 361 MHL3_3D_FORMAT_TYPE_TB, /* top-bottom */ 362 MHL3_3D_FORMAT_TYPE_LR, /* left-right */ 363 MHL3_3D_FORMAT_TYPE_FS_TB, /* frame sequential, top-bottom */ 364 MHL3_3D_FORMAT_TYPE_FS_LR, /* frame sequential, left-right */ 365 MHL3_3D_FORMAT_TYPE_TB_LR /* top-bottom, left-right */ 366}; 367 368struct mhl3_infoframe { 369 unsigned char version; 370 enum mhl3_video_format video_format; 371 enum mhl3_3d_format_type format_type; 372 bool sep_audio; 373 int hev_format; 374 int av_delay; 375}; 376 377#endif /* __MHL_H__ */ 378