1/* 2 * OMAP Dual-Mode Timers 3 * 4 * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/ 5 * Tarun Kanti DebBarma <tarun.kanti@ti.com> 6 * Thara Gopinath <thara@ti.com> 7 * 8 * Platform device conversion and hwmod support. 9 * 10 * Copyright (C) 2005 Nokia Corporation 11 * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com> 12 * PWM and clock framwork support by Timo Teras. 13 * 14 * This program is free software; you can redistribute it and/or modify it 15 * under the terms of the GNU General Public License as published by the 16 * Free Software Foundation; either version 2 of the License, or (at your 17 * option) any later version. 18 * 19 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 20 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 21 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 22 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 23 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 24 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 * 28 * You should have received a copy of the GNU General Public License along 29 * with this program; if not, write to the Free Software Foundation, Inc., 30 * 675 Mass Ave, Cambridge, MA 02139, USA. 31 */ 32 33#include <linux/delay.h> 34#include <linux/io.h> 35#include <linux/platform_device.h> 36 37#ifndef __CLOCKSOURCE_DMTIMER_H 38#define __CLOCKSOURCE_DMTIMER_H 39 40/* clock sources */ 41#define OMAP_TIMER_SRC_SYS_CLK 0x00 42#define OMAP_TIMER_SRC_32_KHZ 0x01 43#define OMAP_TIMER_SRC_EXT_CLK 0x02 44 45/* timer interrupt enable bits */ 46#define OMAP_TIMER_INT_CAPTURE (1 << 2) 47#define OMAP_TIMER_INT_OVERFLOW (1 << 1) 48#define OMAP_TIMER_INT_MATCH (1 << 0) 49 50/* trigger types */ 51#define OMAP_TIMER_TRIGGER_NONE 0x00 52#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 53#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 54 55/* timer capabilities used in hwmod database */ 56#define OMAP_TIMER_SECURE 0x80000000 57#define OMAP_TIMER_ALWON 0x40000000 58#define OMAP_TIMER_HAS_PWM 0x20000000 59#define OMAP_TIMER_NEEDS_RESET 0x10000000 60#define OMAP_TIMER_HAS_DSP_IRQ 0x08000000 61 62struct omap_dm_timer { 63}; 64 65u32 omap_dm_timer_modify_idlect_mask(u32 inputmask); 66 67/* 68 * Do not use the defines below, they are not needed. They should be only 69 * used by dmtimer.c and sys_timer related code. 70 */ 71 72/* 73 * The interrupt registers are different between v1 and v2 ip. 74 * These registers are offsets from timer->iobase. 75 */ 76#define OMAP_TIMER_ID_OFFSET 0x00 77#define OMAP_TIMER_OCP_CFG_OFFSET 0x10 78 79#define OMAP_TIMER_V1_SYS_STAT_OFFSET 0x14 80#define OMAP_TIMER_V1_STAT_OFFSET 0x18 81#define OMAP_TIMER_V1_INT_EN_OFFSET 0x1c 82 83#define OMAP_TIMER_V2_IRQSTATUS_RAW 0x24 84#define OMAP_TIMER_V2_IRQSTATUS 0x28 85#define OMAP_TIMER_V2_IRQENABLE_SET 0x2c 86#define OMAP_TIMER_V2_IRQENABLE_CLR 0x30 87 88/* 89 * The functional registers have a different base on v1 and v2 ip. 90 * These registers are offsets from timer->func_base. The func_base 91 * is samae as io_base for v1 and io_base + 0x14 for v2 ip. 92 * 93 */ 94#define OMAP_TIMER_V2_FUNC_OFFSET 0x14 95 96#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 97#define _OMAP_TIMER_CTRL_OFFSET 0x24 98#define OMAP_TIMER_CTRL_GPOCFG (1 << 14) 99#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) 100#define OMAP_TIMER_CTRL_PT (1 << 12) 101#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) 102#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) 103#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) 104#define OMAP_TIMER_CTRL_SCPWM (1 << 7) 105#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ 106#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ 107#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */ 108#define OMAP_TIMER_CTRL_POSTED (1 << 2) 109#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ 110#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ 111#define _OMAP_TIMER_COUNTER_OFFSET 0x28 112#define _OMAP_TIMER_LOAD_OFFSET 0x2c 113#define _OMAP_TIMER_TRIGGER_OFFSET 0x30 114#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34 115#define WP_NONE 0 /* no write pending bit */ 116#define WP_TCLR (1 << 0) 117#define WP_TCRR (1 << 1) 118#define WP_TLDR (1 << 2) 119#define WP_TTGR (1 << 3) 120#define WP_TMAR (1 << 4) 121#define WP_TPIR (1 << 5) 122#define WP_TNIR (1 << 6) 123#define WP_TCVR (1 << 7) 124#define WP_TOCR (1 << 8) 125#define WP_TOWR (1 << 9) 126#define _OMAP_TIMER_MATCH_OFFSET 0x38 127#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c 128#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40 129#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */ 130#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */ 131#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */ 132#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */ 133#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */ 134#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */ 135 136#endif /* __CLOCKSOURCE_DMTIMER_H */ 137