1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * Copyright (C) International Business Machines Corp., 2000-2003 4 */ 5#ifndef _H_JFS_FILSYS 6#define _H_JFS_FILSYS 7 8/* 9 * jfs_filsys.h 10 * 11 * file system (implementation-dependent) constants 12 * 13 * refer to <limits.h> for system wide implementation-dependent constants 14 */ 15 16/* 17 * file system option (superblock flag) 18 */ 19 20/* directory option */ 21#define JFS_UNICODE 0x00000001 /* unicode name */ 22 23/* mount time flags for error handling */ 24#define JFS_ERR_REMOUNT_RO 0x00000002 /* remount read-only */ 25#define JFS_ERR_CONTINUE 0x00000004 /* continue */ 26#define JFS_ERR_PANIC 0x00000008 /* panic */ 27 28/* Quota support */ 29#define JFS_USRQUOTA 0x00000010 30#define JFS_GRPQUOTA 0x00000020 31 32/* mount time flag to disable journaling to disk */ 33#define JFS_NOINTEGRITY 0x00000040 34 35/* mount time flag to enable TRIM to ssd disks */ 36#define JFS_DISCARD 0x00000080 37 38/* commit option */ 39#define JFS_COMMIT 0x00000f00 /* commit option mask */ 40#define JFS_GROUPCOMMIT 0x00000100 /* group (of 1) commit */ 41#define JFS_LAZYCOMMIT 0x00000200 /* lazy commit */ 42#define JFS_TMPFS 0x00000400 /* temporary file system - 43 * do not log/commit: 44 * Never implemented 45 */ 46 47/* log logical volume option */ 48#define JFS_INLINELOG 0x00000800 /* inline log within file system */ 49#define JFS_INLINEMOVE 0x00001000 /* inline log being moved */ 50 51/* Secondary aggregate inode table */ 52#define JFS_BAD_SAIT 0x00010000 /* current secondary ait is bad */ 53 54/* sparse regular file support */ 55#define JFS_SPARSE 0x00020000 /* sparse regular file */ 56 57/* DASD Limits F226941 */ 58#define JFS_DASD_ENABLED 0x00040000 /* DASD limits enabled */ 59#define JFS_DASD_PRIME 0x00080000 /* Prime DASD usage on boot */ 60 61/* big endian flag */ 62#define JFS_SWAP_BYTES 0x00100000 /* running on big endian computer */ 63 64/* Directory index */ 65#define JFS_DIR_INDEX 0x00200000 /* Persistent index for */ 66 67/* platform options */ 68#define JFS_LINUX 0x10000000 /* Linux support */ 69#define JFS_DFS 0x20000000 /* DCE DFS LFS support */ 70/* Never implemented */ 71 72#define JFS_OS2 0x40000000 /* OS/2 support */ 73/* case-insensitive name/directory support */ 74 75#define JFS_AIX 0x80000000 /* AIX support */ 76 77/* 78 * buffer cache configuration 79 */ 80/* page size */ 81#ifdef PSIZE 82#undef PSIZE 83#endif 84#define PSIZE 4096 /* page size (in byte) */ 85#define L2PSIZE 12 /* log2(PSIZE) */ 86#define POFFSET 4095 /* offset within page */ 87 88/* buffer page size */ 89#define BPSIZE PSIZE 90 91/* 92 * fs fundamental size 93 * 94 * PSIZE >= file system block size >= PBSIZE >= DISIZE 95 */ 96#define PBSIZE 512 /* physical block size (in byte) */ 97#define L2PBSIZE 9 /* log2(PBSIZE) */ 98 99#define DISIZE 512 /* on-disk inode size (in byte) */ 100#define L2DISIZE 9 /* log2(DISIZE) */ 101 102#define IDATASIZE 256 /* inode inline data size */ 103#define IXATTRSIZE 128 /* inode inline extended attribute size */ 104 105#define XTPAGE_SIZE 4096 106#define log2_PAGESIZE 12 107 108#define IAG_SIZE 4096 109#define IAG_EXTENT_SIZE 4096 110#define INOSPERIAG 4096 /* number of disk inodes per iag */ 111#define L2INOSPERIAG 12 /* l2 number of disk inodes per iag */ 112#define INOSPEREXT 32 /* number of disk inode per extent */ 113#define L2INOSPEREXT 5 /* l2 number of disk inode per extent */ 114#define IXSIZE (DISIZE * INOSPEREXT) /* inode extent size */ 115#define INOSPERPAGE 8 /* number of disk inodes per 4K page */ 116#define L2INOSPERPAGE 3 /* log2(INOSPERPAGE) */ 117 118#define IAGFREELIST_LWM 64 119 120#define INODE_EXTENT_SIZE IXSIZE /* inode extent size */ 121#define NUM_INODE_PER_EXTENT INOSPEREXT 122#define NUM_INODE_PER_IAG INOSPERIAG 123 124#define MINBLOCKSIZE 512 125#define L2MINBLOCKSIZE 9 126#define MAXBLOCKSIZE 4096 127#define L2MAXBLOCKSIZE 12 128#define MAXFILESIZE ((s64)1 << 52) 129 130#define JFS_LINK_MAX 0xffffffff 131 132/* Minimum number of bytes supported for a JFS partition */ 133#define MINJFS (0x1000000) 134#define MINJFSTEXT "16" 135 136/* 137 * file system block size -> physical block size 138 */ 139#define LBOFFSET(x) ((x) & (PBSIZE - 1)) 140#define LBNUMBER(x) ((x) >> L2PBSIZE) 141#define LBLK2PBLK(sb,b) ((b) << (sb->s_blocksize_bits - L2PBSIZE)) 142#define PBLK2LBLK(sb,b) ((b) >> (sb->s_blocksize_bits - L2PBSIZE)) 143/* size in byte -> last page number */ 144#define SIZE2PN(size) ( ((s64)((size) - 1)) >> (L2PSIZE) ) 145/* size in byte -> last file system block number */ 146#define SIZE2BN(size, l2bsize) ( ((s64)((size) - 1)) >> (l2bsize) ) 147 148/* 149 * fixed physical block address (physical block size = 512 byte) 150 * 151 * NOTE: since we can't guarantee a physical block size of 512 bytes the use of 152 * these macros should be removed and the byte offset macros used instead. 153 */ 154#define SUPER1_B 64 /* primary superblock */ 155#define AIMAP_B (SUPER1_B + 8) /* 1st extent of aggregate inode map */ 156#define AITBL_B (AIMAP_B + 16) /* 157 * 1st extent of aggregate inode table 158 */ 159#define SUPER2_B (AITBL_B + 32) /* 2ndary superblock pbn */ 160#define BMAP_B (SUPER2_B + 8) /* block allocation map */ 161 162/* 163 * SIZE_OF_SUPER defines the total amount of space reserved on disk for the 164 * superblock. This is not the same as the superblock structure, since all of 165 * this space is not currently being used. 166 */ 167#define SIZE_OF_SUPER PSIZE 168 169/* 170 * SIZE_OF_AG_TABLE defines the amount of space reserved to hold the AG table 171 */ 172#define SIZE_OF_AG_TABLE PSIZE 173 174/* 175 * SIZE_OF_MAP_PAGE defines the amount of disk space reserved for each page of 176 * the inode allocation map (to hold iag) 177 */ 178#define SIZE_OF_MAP_PAGE PSIZE 179 180/* 181 * fixed byte offset address 182 */ 183#define SUPER1_OFF 0x8000 /* primary superblock */ 184#define AIMAP_OFF (SUPER1_OFF + SIZE_OF_SUPER) 185 /* 186 * Control page of aggregate inode map 187 * followed by 1st extent of map 188 */ 189#define AITBL_OFF (AIMAP_OFF + (SIZE_OF_MAP_PAGE << 1)) 190 /* 191 * 1st extent of aggregate inode table 192 */ 193#define SUPER2_OFF (AITBL_OFF + INODE_EXTENT_SIZE) 194 /* 195 * secondary superblock 196 */ 197#define BMAP_OFF (SUPER2_OFF + SIZE_OF_SUPER) 198 /* 199 * block allocation map 200 */ 201 202/* 203 * The following macro is used to indicate the number of reserved disk blocks at 204 * the front of an aggregate, in terms of physical blocks. This value is 205 * currently defined to be 32K. This turns out to be the same as the primary 206 * superblock's address, since it directly follows the reserved blocks. 207 */ 208#define AGGR_RSVD_BLOCKS SUPER1_B 209 210/* 211 * The following macro is used to indicate the number of reserved bytes at the 212 * front of an aggregate. This value is currently defined to be 32K. This 213 * turns out to be the same as the primary superblock's byte offset, since it 214 * directly follows the reserved blocks. 215 */ 216#define AGGR_RSVD_BYTES SUPER1_OFF 217 218/* 219 * The following macro defines the byte offset for the first inode extent in 220 * the aggregate inode table. This allows us to find the self inode to find the 221 * rest of the table. Currently this value is 44K. 222 */ 223#define AGGR_INODE_TABLE_START AITBL_OFF 224 225/* 226 * fixed reserved inode number 227 */ 228/* aggregate inode */ 229#define AGGR_RESERVED_I 0 /* aggregate inode (reserved) */ 230#define AGGREGATE_I 1 /* aggregate inode map inode */ 231#define BMAP_I 2 /* aggregate block allocation map inode */ 232#define LOG_I 3 /* aggregate inline log inode */ 233#define BADBLOCK_I 4 /* aggregate bad block inode */ 234#define FILESYSTEM_I 16 /* 1st/only fileset inode in ait: 235 * fileset inode map inode 236 */ 237 238/* per fileset inode */ 239#define FILESET_RSVD_I 0 /* fileset inode (reserved) */ 240#define FILESET_EXT_I 1 /* fileset inode extension */ 241#define ROOT_I 2 /* fileset root inode */ 242#define ACL_I 3 /* fileset ACL inode */ 243 244#define FILESET_OBJECT_I 4 /* the first fileset inode available for a file 245 * or directory or link... 246 */ 247#define FIRST_FILESET_INO 16 /* the first aggregate inode which describes 248 * an inode. (To fsck this is also the first 249 * inode in part 2 of the agg inode table.) 250 */ 251 252/* 253 * directory configuration 254 */ 255#define JFS_NAME_MAX 255 256#define JFS_PATH_MAX BPSIZE 257 258 259/* 260 * file system state (superblock state) 261 */ 262#define FM_CLEAN 0x00000000 /* file system is unmounted and clean */ 263#define FM_MOUNT 0x00000001 /* file system is mounted cleanly */ 264#define FM_DIRTY 0x00000002 /* file system was not unmounted and clean 265 * when mounted or 266 * commit failure occurred while being mounted: 267 * fsck() must be run to repair 268 */ 269#define FM_LOGREDO 0x00000004 /* log based recovery (logredo()) failed: 270 * fsck() must be run to repair 271 */ 272#define FM_EXTENDFS 0x00000008 /* file system extendfs() in progress */ 273#define FM_STATE_MAX 0x0000000f /* max value of s_state */ 274 275#endif /* _H_JFS_FILSYS */ 276