1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * linux/drivers/video/cyber2000fb.c 4 * 5 * Copyright (C) 1998-2002 Russell King 6 * 7 * MIPS and 50xx clock support 8 * Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com> 9 * 10 * 32 bit support, text color and panning fixes for modes != 8 bit 11 * Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org> 12 * 13 * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device 14 * 15 * Based on cyberfb.c. 16 * 17 * Note that we now use the new fbcon fix, var and cmap scheme. We do 18 * still have to check which console is the currently displayed one 19 * however, especially for the colourmap stuff. 20 * 21 * We also use the new hotplug PCI subsystem. I'm not sure if there 22 * are any such cards, but I'm erring on the side of caution. We don't 23 * want to go pop just because someone does have one. 24 * 25 * Note that this doesn't work fully in the case of multiple CyberPro 26 * cards with grabbers. We currently can only attach to the first 27 * CyberPro card found. 28 * 29 * When we're in truecolour mode, we power down the LUT RAM as a power 30 * saving feature. Also, when we enter any of the powersaving modes 31 * (except soft blanking) we power down the RAMDACs. This saves about 32 * 1W, which is roughly 8% of the power consumption of a NetWinder 33 * (which, incidentally, is about the same saving as a 2.5in hard disk 34 * entering standby mode.) 35 */ 36#include <linux/aperture.h> 37#include <linux/module.h> 38#include <linux/kernel.h> 39#include <linux/errno.h> 40#include <linux/string.h> 41#include <linux/mm.h> 42#include <linux/slab.h> 43#include <linux/delay.h> 44#include <linux/fb.h> 45#include <linux/pci.h> 46#include <linux/init.h> 47#include <linux/io.h> 48#include <linux/i2c.h> 49#include <linux/i2c-algo-bit.h> 50 51#ifdef __arm__ 52#include <asm/mach-types.h> 53#endif 54 55#include "cyber2000fb.h" 56 57struct cfb_info { 58 struct fb_info fb; 59 struct display_switch *dispsw; 60 unsigned char __iomem *region; 61 unsigned char __iomem *regs; 62 u_int id; 63 u_int irq; 64 int func_use_count; 65 u_long ref_ps; 66 67 /* 68 * Clock divisors 69 */ 70 u_int divisors[4]; 71 72 struct { 73 u8 red, green, blue; 74 } palette[NR_PALETTE]; 75 76 u_char mem_ctl1; 77 u_char mem_ctl2; 78 u_char mclk_mult; 79 u_char mclk_div; 80 /* 81 * RAMDAC control register is both of these or'ed together 82 */ 83 u_char ramdac_ctrl; 84 u_char ramdac_powerdown; 85 86 u32 pseudo_palette[16]; 87 88 spinlock_t reg_b0_lock; 89 90#ifdef CONFIG_FB_CYBER2000_DDC 91 bool ddc_registered; 92 struct i2c_adapter ddc_adapter; 93 struct i2c_algo_bit_data ddc_algo; 94#endif 95 96#ifdef CONFIG_FB_CYBER2000_I2C 97 struct i2c_adapter i2c_adapter; 98 struct i2c_algo_bit_data i2c_algo; 99#endif 100}; 101 102static char *default_font = "Acorn8x8"; 103module_param(default_font, charp, 0); 104MODULE_PARM_DESC(default_font, "Default font name"); 105 106/* 107 * Our access methods. 108 */ 109#define cyber2000fb_writel(val, reg, cfb) writel(val, (cfb)->regs + (reg)) 110#define cyber2000fb_writew(val, reg, cfb) writew(val, (cfb)->regs + (reg)) 111#define cyber2000fb_writeb(val, reg, cfb) writeb(val, (cfb)->regs + (reg)) 112 113#define cyber2000fb_readb(reg, cfb) readb((cfb)->regs + (reg)) 114 115static inline void 116cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb) 117{ 118 cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb); 119} 120 121static inline void 122cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb) 123{ 124 cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb); 125} 126 127static inline unsigned int 128cyber2000_grphr(unsigned int reg, struct cfb_info *cfb) 129{ 130 cyber2000fb_writeb(reg, 0x3ce, cfb); 131 return cyber2000fb_readb(0x3cf, cfb); 132} 133 134static inline void 135cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb) 136{ 137 cyber2000fb_readb(0x3da, cfb); 138 cyber2000fb_writeb(reg, 0x3c0, cfb); 139 cyber2000fb_readb(0x3c1, cfb); 140 cyber2000fb_writeb(val, 0x3c0, cfb); 141} 142 143static inline void 144cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb) 145{ 146 cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb); 147} 148 149/* -------------------- Hardware specific routines ------------------------- */ 150 151/* 152 * Hardware Cyber2000 Acceleration 153 */ 154static void 155cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) 156{ 157 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 158 unsigned long dst, col; 159 160 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) { 161 cfb_fillrect(info, rect); 162 return; 163 } 164 165 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); 166 cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb); 167 cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb); 168 169 col = rect->color; 170 if (cfb->fb.var.bits_per_pixel > 8) 171 col = ((u32 *)cfb->fb.pseudo_palette)[col]; 172 cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb); 173 174 dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual; 175 if (cfb->fb.var.bits_per_pixel == 24) { 176 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb); 177 dst *= 3; 178 } 179 180 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb); 181 cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb); 182 cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb); 183 cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb); 184} 185 186static void 187cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region) 188{ 189 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 190 unsigned int cmd = CO_CMD_L_PATTERN_FGCOL; 191 unsigned long src, dst; 192 193 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) { 194 cfb_copyarea(info, region); 195 return; 196 } 197 198 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); 199 cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb); 200 cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb); 201 202 src = region->sx + region->sy * cfb->fb.var.xres_virtual; 203 dst = region->dx + region->dy * cfb->fb.var.xres_virtual; 204 205 if (region->sx < region->dx) { 206 src += region->width - 1; 207 dst += region->width - 1; 208 cmd |= CO_CMD_L_INC_LEFT; 209 } 210 211 if (region->sy < region->dy) { 212 src += (region->height - 1) * cfb->fb.var.xres_virtual; 213 dst += (region->height - 1) * cfb->fb.var.xres_virtual; 214 cmd |= CO_CMD_L_INC_UP; 215 } 216 217 if (cfb->fb.var.bits_per_pixel == 24) { 218 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb); 219 src *= 3; 220 dst *= 3; 221 } 222 cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb); 223 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb); 224 cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb); 225 cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb); 226 cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER, 227 CO_REG_CMD_H, cfb); 228} 229 230static int cyber2000fb_sync(struct fb_info *info) 231{ 232 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 233 int count = 100000; 234 235 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) 236 return 0; 237 238 while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) { 239 if (!count--) { 240 debug_printf("accel_wait timed out\n"); 241 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb); 242 break; 243 } 244 udelay(1); 245 } 246 return 0; 247} 248 249/* 250 * =========================================================================== 251 */ 252 253static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf) 254{ 255 u_int mask = (1 << bf->length) - 1; 256 257 return (val >> (16 - bf->length) & mask) << bf->offset; 258} 259 260/* 261 * Set a single color register. Return != 0 for invalid regno. 262 */ 263static int 264cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, 265 u_int transp, struct fb_info *info) 266{ 267 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 268 struct fb_var_screeninfo *var = &cfb->fb.var; 269 u32 pseudo_val; 270 int ret = 1; 271 272 switch (cfb->fb.fix.visual) { 273 default: 274 return 1; 275 276 /* 277 * Pseudocolour: 278 * 8 8 279 * pixel --/--+--/--> red lut --> red dac 280 * | 8 281 * +--/--> green lut --> green dac 282 * | 8 283 * +--/--> blue lut --> blue dac 284 */ 285 case FB_VISUAL_PSEUDOCOLOR: 286 if (regno >= NR_PALETTE) 287 return 1; 288 289 red >>= 8; 290 green >>= 8; 291 blue >>= 8; 292 293 cfb->palette[regno].red = red; 294 cfb->palette[regno].green = green; 295 cfb->palette[regno].blue = blue; 296 297 cyber2000fb_writeb(regno, 0x3c8, cfb); 298 cyber2000fb_writeb(red, 0x3c9, cfb); 299 cyber2000fb_writeb(green, 0x3c9, cfb); 300 cyber2000fb_writeb(blue, 0x3c9, cfb); 301 return 0; 302 303 /* 304 * Direct colour: 305 * n rl 306 * pixel --/--+--/--> red lut --> red dac 307 * | gl 308 * +--/--> green lut --> green dac 309 * | bl 310 * +--/--> blue lut --> blue dac 311 * n = bpp, rl = red length, gl = green length, bl = blue length 312 */ 313 case FB_VISUAL_DIRECTCOLOR: 314 red >>= 8; 315 green >>= 8; 316 blue >>= 8; 317 318 if (var->green.length == 6 && regno < 64) { 319 cfb->palette[regno << 2].green = green; 320 321 /* 322 * The 6 bits of the green component are applied 323 * to the high 6 bits of the LUT. 324 */ 325 cyber2000fb_writeb(regno << 2, 0x3c8, cfb); 326 cyber2000fb_writeb(cfb->palette[regno >> 1].red, 327 0x3c9, cfb); 328 cyber2000fb_writeb(green, 0x3c9, cfb); 329 cyber2000fb_writeb(cfb->palette[regno >> 1].blue, 330 0x3c9, cfb); 331 332 green = cfb->palette[regno << 3].green; 333 334 ret = 0; 335 } 336 337 if (var->green.length >= 5 && regno < 32) { 338 cfb->palette[regno << 3].red = red; 339 cfb->palette[regno << 3].green = green; 340 cfb->palette[regno << 3].blue = blue; 341 342 /* 343 * The 5 bits of each colour component are 344 * applied to the high 5 bits of the LUT. 345 */ 346 cyber2000fb_writeb(regno << 3, 0x3c8, cfb); 347 cyber2000fb_writeb(red, 0x3c9, cfb); 348 cyber2000fb_writeb(green, 0x3c9, cfb); 349 cyber2000fb_writeb(blue, 0x3c9, cfb); 350 ret = 0; 351 } 352 353 if (var->green.length == 4 && regno < 16) { 354 cfb->palette[regno << 4].red = red; 355 cfb->palette[regno << 4].green = green; 356 cfb->palette[regno << 4].blue = blue; 357 358 /* 359 * The 5 bits of each colour component are 360 * applied to the high 5 bits of the LUT. 361 */ 362 cyber2000fb_writeb(regno << 4, 0x3c8, cfb); 363 cyber2000fb_writeb(red, 0x3c9, cfb); 364 cyber2000fb_writeb(green, 0x3c9, cfb); 365 cyber2000fb_writeb(blue, 0x3c9, cfb); 366 ret = 0; 367 } 368 369 /* 370 * Since this is only used for the first 16 colours, we 371 * don't have to care about overflowing for regno >= 32 372 */ 373 pseudo_val = regno << var->red.offset | 374 regno << var->green.offset | 375 regno << var->blue.offset; 376 break; 377 378 /* 379 * True colour: 380 * n rl 381 * pixel --/--+--/--> red dac 382 * | gl 383 * +--/--> green dac 384 * | bl 385 * +--/--> blue dac 386 * n = bpp, rl = red length, gl = green length, bl = blue length 387 */ 388 case FB_VISUAL_TRUECOLOR: 389 pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp); 390 pseudo_val |= convert_bitfield(red, &var->red); 391 pseudo_val |= convert_bitfield(green, &var->green); 392 pseudo_val |= convert_bitfield(blue, &var->blue); 393 ret = 0; 394 break; 395 } 396 397 /* 398 * Now set our pseudo palette for the CFB16/24/32 drivers. 399 */ 400 if (regno < 16) 401 ((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val; 402 403 return ret; 404} 405 406struct par_info { 407 /* 408 * Hardware 409 */ 410 u_char clock_mult; 411 u_char clock_div; 412 u_char extseqmisc; 413 u_char co_pixfmt; 414 u_char crtc_ofl; 415 u_char crtc[19]; 416 u_int width; 417 u_int pitch; 418 u_int fetch; 419 420 /* 421 * Other 422 */ 423 u_char ramdac; 424}; 425 426static const u_char crtc_idx[] = { 427 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 428 0x08, 0x09, 429 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18 430}; 431 432static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb) 433{ 434 unsigned int i; 435 unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown; 436 437 cyber2000fb_writeb(0x56, 0x3ce, cfb); 438 i = cyber2000fb_readb(0x3cf, cfb); 439 cyber2000fb_writeb(i | 4, 0x3cf, cfb); 440 cyber2000fb_writeb(val, 0x3c6, cfb); 441 cyber2000fb_writeb(i, 0x3cf, cfb); 442 /* prevent card lock-up observed on x86 with CyberPro 2000 */ 443 cyber2000fb_readb(0x3cf, cfb); 444} 445 446static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw) 447{ 448 u_int i; 449 450 /* 451 * Blank palette 452 */ 453 for (i = 0; i < NR_PALETTE; i++) { 454 cyber2000fb_writeb(i, 0x3c8, cfb); 455 cyber2000fb_writeb(0, 0x3c9, cfb); 456 cyber2000fb_writeb(0, 0x3c9, cfb); 457 cyber2000fb_writeb(0, 0x3c9, cfb); 458 } 459 460 cyber2000fb_writeb(0xef, 0x3c2, cfb); 461 cyber2000_crtcw(0x11, 0x0b, cfb); 462 cyber2000_attrw(0x11, 0x00, cfb); 463 464 cyber2000_seqw(0x00, 0x01, cfb); 465 cyber2000_seqw(0x01, 0x01, cfb); 466 cyber2000_seqw(0x02, 0x0f, cfb); 467 cyber2000_seqw(0x03, 0x00, cfb); 468 cyber2000_seqw(0x04, 0x0e, cfb); 469 cyber2000_seqw(0x00, 0x03, cfb); 470 471 for (i = 0; i < sizeof(crtc_idx); i++) 472 cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb); 473 474 for (i = 0x0a; i < 0x10; i++) 475 cyber2000_crtcw(i, 0, cfb); 476 477 cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb); 478 cyber2000_grphw(0x00, 0x00, cfb); 479 cyber2000_grphw(0x01, 0x00, cfb); 480 cyber2000_grphw(0x02, 0x00, cfb); 481 cyber2000_grphw(0x03, 0x00, cfb); 482 cyber2000_grphw(0x04, 0x00, cfb); 483 cyber2000_grphw(0x05, 0x60, cfb); 484 cyber2000_grphw(0x06, 0x05, cfb); 485 cyber2000_grphw(0x07, 0x0f, cfb); 486 cyber2000_grphw(0x08, 0xff, cfb); 487 488 /* Attribute controller registers */ 489 for (i = 0; i < 16; i++) 490 cyber2000_attrw(i, i, cfb); 491 492 cyber2000_attrw(0x10, 0x01, cfb); 493 cyber2000_attrw(0x11, 0x00, cfb); 494 cyber2000_attrw(0x12, 0x0f, cfb); 495 cyber2000_attrw(0x13, 0x00, cfb); 496 cyber2000_attrw(0x14, 0x00, cfb); 497 498 /* PLL registers */ 499 spin_lock(&cfb->reg_b0_lock); 500 cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb); 501 cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb); 502 cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb); 503 cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb); 504 cyber2000_grphw(0x90, 0x01, cfb); 505 cyber2000_grphw(0xb9, 0x80, cfb); 506 cyber2000_grphw(0xb9, 0x00, cfb); 507 spin_unlock(&cfb->reg_b0_lock); 508 509 cfb->ramdac_ctrl = hw->ramdac; 510 cyber2000fb_write_ramdac_ctrl(cfb); 511 512 cyber2000fb_writeb(0x20, 0x3c0, cfb); 513 cyber2000fb_writeb(0xff, 0x3c6, cfb); 514 515 cyber2000_grphw(0x14, hw->fetch, cfb); 516 cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) | 517 ((hw->pitch >> 4) & 0x30), cfb); 518 cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb); 519 520 /* 521 * Set up accelerator registers 522 */ 523 cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb); 524 cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb); 525 cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb); 526} 527 528static inline int 529cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var) 530{ 531 u_int base = var->yoffset * var->xres_virtual + var->xoffset; 532 533 base *= var->bits_per_pixel; 534 535 /* 536 * Convert to bytes and shift two extra bits because DAC 537 * can only start on 4 byte aligned data. 538 */ 539 base >>= 5; 540 541 if (base >= 1 << 20) 542 return -EINVAL; 543 544 cyber2000_grphw(0x10, base >> 16 | 0x10, cfb); 545 cyber2000_crtcw(0x0c, base >> 8, cfb); 546 cyber2000_crtcw(0x0d, base, cfb); 547 548 return 0; 549} 550 551static int 552cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb, 553 struct fb_var_screeninfo *var) 554{ 555 u_int Htotal, Hblankend, Hsyncend; 556 u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend; 557#define ENCODE_BIT(v, b1, m, b2) ((((v) >> (b1)) & (m)) << (b2)) 558 559 hw->crtc[13] = hw->pitch; 560 hw->crtc[17] = 0xe3; 561 hw->crtc[14] = 0; 562 hw->crtc[8] = 0; 563 564 Htotal = var->xres + var->right_margin + 565 var->hsync_len + var->left_margin; 566 567 if (Htotal > 2080) 568 return -EINVAL; 569 570 hw->crtc[0] = (Htotal >> 3) - 5; 571 hw->crtc[1] = (var->xres >> 3) - 1; 572 hw->crtc[2] = var->xres >> 3; 573 hw->crtc[4] = (var->xres + var->right_margin) >> 3; 574 575 Hblankend = (Htotal - 4 * 8) >> 3; 576 577 hw->crtc[3] = ENCODE_BIT(Hblankend, 0, 0x1f, 0) | 578 ENCODE_BIT(1, 0, 0x01, 7); 579 580 Hsyncend = (var->xres + var->right_margin + var->hsync_len) >> 3; 581 582 hw->crtc[5] = ENCODE_BIT(Hsyncend, 0, 0x1f, 0) | 583 ENCODE_BIT(Hblankend, 5, 0x01, 7); 584 585 Vdispend = var->yres - 1; 586 Vsyncstart = var->yres + var->lower_margin; 587 Vsyncend = var->yres + var->lower_margin + var->vsync_len; 588 Vtotal = var->yres + var->lower_margin + var->vsync_len + 589 var->upper_margin - 2; 590 591 if (Vtotal > 2047) 592 return -EINVAL; 593 594 Vblankstart = var->yres + 6; 595 Vblankend = Vtotal - 10; 596 597 hw->crtc[6] = Vtotal; 598 hw->crtc[7] = ENCODE_BIT(Vtotal, 8, 0x01, 0) | 599 ENCODE_BIT(Vdispend, 8, 0x01, 1) | 600 ENCODE_BIT(Vsyncstart, 8, 0x01, 2) | 601 ENCODE_BIT(Vblankstart, 8, 0x01, 3) | 602 ENCODE_BIT(1, 0, 0x01, 4) | 603 ENCODE_BIT(Vtotal, 9, 0x01, 5) | 604 ENCODE_BIT(Vdispend, 9, 0x01, 6) | 605 ENCODE_BIT(Vsyncstart, 9, 0x01, 7); 606 hw->crtc[9] = ENCODE_BIT(0, 0, 0x1f, 0) | 607 ENCODE_BIT(Vblankstart, 9, 0x01, 5) | 608 ENCODE_BIT(1, 0, 0x01, 6); 609 hw->crtc[10] = Vsyncstart; 610 hw->crtc[11] = ENCODE_BIT(Vsyncend, 0, 0x0f, 0) | 611 ENCODE_BIT(1, 0, 0x01, 7); 612 hw->crtc[12] = Vdispend; 613 hw->crtc[15] = Vblankstart; 614 hw->crtc[16] = Vblankend; 615 hw->crtc[18] = 0xff; 616 617 /* 618 * overflow - graphics reg 0x11 619 * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10 620 * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT 621 */ 622 hw->crtc_ofl = 623 ENCODE_BIT(Vtotal, 10, 0x01, 0) | 624 ENCODE_BIT(Vdispend, 10, 0x01, 1) | 625 ENCODE_BIT(Vsyncstart, 10, 0x01, 2) | 626 ENCODE_BIT(Vblankstart, 10, 0x01, 3) | 627 EXT_CRT_VRTOFL_LINECOMP10; 628 629 /* woody: set the interlaced bit... */ 630 /* FIXME: what about doublescan? */ 631 if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) 632 hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE; 633 634 return 0; 635} 636 637/* 638 * The following was discovered by a good monitor, bit twiddling, theorising 639 * and but mostly luck. Strangely, it looks like everyone elses' PLL! 640 * 641 * Clock registers: 642 * fclock = fpll / div2 643 * fpll = fref * mult / div1 644 * where: 645 * fref = 14.318MHz (69842ps) 646 * mult = reg0xb0.7:0 647 * div1 = (reg0xb1.5:0 + 1) 648 * div2 = 2^(reg0xb1.7:6) 649 * fpll should be between 115 and 260 MHz 650 * (8696ps and 3846ps) 651 */ 652static int 653cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb, 654 struct fb_var_screeninfo *var) 655{ 656 u_long pll_ps = var->pixclock; 657 const u_long ref_ps = cfb->ref_ps; 658 u_int div2, t_div1, best_div1, best_mult; 659 int best_diff; 660 int vco; 661 662 /* 663 * Step 1: 664 * find div2 such that 115MHz < fpll < 260MHz 665 * and 0 <= div2 < 4 666 */ 667 for (div2 = 0; div2 < 4; div2++) { 668 u_long new_pll; 669 670 new_pll = pll_ps / cfb->divisors[div2]; 671 if (8696 > new_pll && new_pll > 3846) { 672 pll_ps = new_pll; 673 break; 674 } 675 } 676 677 if (div2 == 4) 678 return -EINVAL; 679 680 /* 681 * Step 2: 682 * Given pll_ps and ref_ps, find: 683 * pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005 684 * where { 1 < best_div1 < 32, 1 < best_mult < 256 } 685 * pll_ps_calc = best_div1 / (ref_ps * best_mult) 686 */ 687 best_diff = 0x7fffffff; 688 best_mult = 2; 689 best_div1 = 32; 690 for (t_div1 = 2; t_div1 < 32; t_div1 += 1) { 691 u_int rr, t_mult, t_pll_ps; 692 int diff; 693 694 /* 695 * Find the multiplier for this divisor 696 */ 697 rr = ref_ps * t_div1; 698 t_mult = (rr + pll_ps / 2) / pll_ps; 699 700 /* 701 * Is the multiplier within the correct range? 702 */ 703 if (t_mult > 256 || t_mult < 2) 704 continue; 705 706 /* 707 * Calculate the actual clock period from this multiplier 708 * and divisor, and estimate the error. 709 */ 710 t_pll_ps = (rr + t_mult / 2) / t_mult; 711 diff = pll_ps - t_pll_ps; 712 if (diff < 0) 713 diff = -diff; 714 715 if (diff < best_diff) { 716 best_diff = diff; 717 best_mult = t_mult; 718 best_div1 = t_div1; 719 } 720 721 /* 722 * If we hit an exact value, there is no point in continuing. 723 */ 724 if (diff == 0) 725 break; 726 } 727 728 /* 729 * Step 3: 730 * combine values 731 */ 732 hw->clock_mult = best_mult - 1; 733 hw->clock_div = div2 << 6 | (best_div1 - 1); 734 735 vco = ref_ps * best_div1 / best_mult; 736 if ((ref_ps == 40690) && (vco < 5556)) 737 /* Set VFSEL when VCO > 180MHz (5.556 ps). */ 738 hw->clock_div |= EXT_DCLK_DIV_VFSEL; 739 740 return 0; 741} 742 743/* 744 * Set the User Defined Part of the Display 745 */ 746static int 747cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) 748{ 749 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 750 struct par_info hw; 751 unsigned int mem; 752 int err; 753 754 var->transp.msb_right = 0; 755 var->red.msb_right = 0; 756 var->green.msb_right = 0; 757 var->blue.msb_right = 0; 758 var->transp.offset = 0; 759 var->transp.length = 0; 760 761 switch (var->bits_per_pixel) { 762 case 8: /* PSEUDOCOLOUR, 256 */ 763 var->red.offset = 0; 764 var->red.length = 8; 765 var->green.offset = 0; 766 var->green.length = 8; 767 var->blue.offset = 0; 768 var->blue.length = 8; 769 break; 770 771 case 16:/* DIRECTCOLOUR, 64k or 32k */ 772 switch (var->green.length) { 773 case 6: /* RGB565, 64k */ 774 var->red.offset = 11; 775 var->red.length = 5; 776 var->green.offset = 5; 777 var->green.length = 6; 778 var->blue.offset = 0; 779 var->blue.length = 5; 780 break; 781 782 default: 783 case 5: /* RGB555, 32k */ 784 var->red.offset = 10; 785 var->red.length = 5; 786 var->green.offset = 5; 787 var->green.length = 5; 788 var->blue.offset = 0; 789 var->blue.length = 5; 790 break; 791 792 case 4: /* RGB444, 4k + transparency? */ 793 var->transp.offset = 12; 794 var->transp.length = 4; 795 var->red.offset = 8; 796 var->red.length = 4; 797 var->green.offset = 4; 798 var->green.length = 4; 799 var->blue.offset = 0; 800 var->blue.length = 4; 801 break; 802 } 803 break; 804 805 case 24:/* TRUECOLOUR, 16m */ 806 var->red.offset = 16; 807 var->red.length = 8; 808 var->green.offset = 8; 809 var->green.length = 8; 810 var->blue.offset = 0; 811 var->blue.length = 8; 812 break; 813 814 case 32:/* TRUECOLOUR, 16m */ 815 var->transp.offset = 24; 816 var->transp.length = 8; 817 var->red.offset = 16; 818 var->red.length = 8; 819 var->green.offset = 8; 820 var->green.length = 8; 821 var->blue.offset = 0; 822 var->blue.length = 8; 823 break; 824 825 default: 826 return -EINVAL; 827 } 828 829 mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8); 830 if (mem > cfb->fb.fix.smem_len) 831 var->yres_virtual = cfb->fb.fix.smem_len * 8 / 832 (var->bits_per_pixel * var->xres_virtual); 833 834 if (var->yres > var->yres_virtual) 835 var->yres = var->yres_virtual; 836 if (var->xres > var->xres_virtual) 837 var->xres = var->xres_virtual; 838 839 err = cyber2000fb_decode_clock(&hw, cfb, var); 840 if (err) 841 return err; 842 843 err = cyber2000fb_decode_crtc(&hw, cfb, var); 844 if (err) 845 return err; 846 847 return 0; 848} 849 850static int cyber2000fb_set_par(struct fb_info *info) 851{ 852 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 853 struct fb_var_screeninfo *var = &cfb->fb.var; 854 struct par_info hw; 855 unsigned int mem; 856 857 hw.width = var->xres_virtual; 858 hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT; 859 860 switch (var->bits_per_pixel) { 861 case 8: 862 hw.co_pixfmt = CO_PIXFMT_8BPP; 863 hw.pitch = hw.width >> 3; 864 hw.extseqmisc = EXT_SEQ_MISC_8; 865 break; 866 867 case 16: 868 hw.co_pixfmt = CO_PIXFMT_16BPP; 869 hw.pitch = hw.width >> 2; 870 871 switch (var->green.length) { 872 case 6: /* RGB565, 64k */ 873 hw.extseqmisc = EXT_SEQ_MISC_16_RGB565; 874 break; 875 case 5: /* RGB555, 32k */ 876 hw.extseqmisc = EXT_SEQ_MISC_16_RGB555; 877 break; 878 case 4: /* RGB444, 4k + transparency? */ 879 hw.extseqmisc = EXT_SEQ_MISC_16_RGB444; 880 break; 881 default: 882 BUG(); 883 } 884 break; 885 886 case 24:/* TRUECOLOUR, 16m */ 887 hw.co_pixfmt = CO_PIXFMT_24BPP; 888 hw.width *= 3; 889 hw.pitch = hw.width >> 3; 890 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN); 891 hw.extseqmisc = EXT_SEQ_MISC_24_RGB888; 892 break; 893 894 case 32:/* TRUECOLOUR, 16m */ 895 hw.co_pixfmt = CO_PIXFMT_32BPP; 896 hw.pitch = hw.width >> 1; 897 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN); 898 hw.extseqmisc = EXT_SEQ_MISC_32; 899 break; 900 901 default: 902 BUG(); 903 } 904 905 /* 906 * Sigh, this is absolutely disgusting, but caused by 907 * the way the fbcon developers want to separate out 908 * the "checking" and the "setting" of the video mode. 909 * 910 * If the mode is not suitable for the hardware here, 911 * we can't prevent it being set by returning an error. 912 * 913 * In theory, since NetWinders contain just one VGA card, 914 * we should never end up hitting this problem. 915 */ 916 BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0); 917 BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0); 918 919 hw.width -= 1; 920 hw.fetch = hw.pitch; 921 if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT)) 922 hw.fetch <<= 1; 923 hw.fetch += 1; 924 925 cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; 926 927 /* 928 * Same here - if the size of the video mode exceeds the 929 * available RAM, we can't prevent this mode being set. 930 * 931 * In theory, since NetWinders contain just one VGA card, 932 * we should never end up hitting this problem. 933 */ 934 mem = cfb->fb.fix.line_length * var->yres_virtual; 935 BUG_ON(mem > cfb->fb.fix.smem_len); 936 937 /* 938 * 8bpp displays are always pseudo colour. 16bpp and above 939 * are direct colour or true colour, depending on whether 940 * the RAMDAC palettes are bypassed. (Direct colour has 941 * palettes, true colour does not.) 942 */ 943 if (var->bits_per_pixel == 8) 944 cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; 945 else if (hw.ramdac & RAMDAC_BYPASS) 946 cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; 947 else 948 cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR; 949 950 cyber2000fb_set_timing(cfb, &hw); 951 cyber2000fb_update_start(cfb, var); 952 953 return 0; 954} 955 956/* 957 * Pan or Wrap the Display 958 */ 959static int 960cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) 961{ 962 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 963 964 if (cyber2000fb_update_start(cfb, var)) 965 return -EINVAL; 966 967 cfb->fb.var.xoffset = var->xoffset; 968 cfb->fb.var.yoffset = var->yoffset; 969 970 if (var->vmode & FB_VMODE_YWRAP) { 971 cfb->fb.var.vmode |= FB_VMODE_YWRAP; 972 } else { 973 cfb->fb.var.vmode &= ~FB_VMODE_YWRAP; 974 } 975 976 return 0; 977} 978 979/* 980 * (Un)Blank the display. 981 * 982 * Blank the screen if blank_mode != 0, else unblank. If 983 * blank == NULL then the caller blanks by setting the CLUT 984 * (Color Look Up Table) to all black. Return 0 if blanking 985 * succeeded, != 0 if un-/blanking failed due to e.g. a 986 * video mode which doesn't support it. Implements VESA 987 * suspend and powerdown modes on hardware that supports 988 * disabling hsync/vsync: 989 * blank_mode == 2: suspend vsync 990 * blank_mode == 3: suspend hsync 991 * blank_mode == 4: powerdown 992 * 993 * wms...Enable VESA DMPS compatible powerdown mode 994 * run "setterm -powersave powerdown" to take advantage 995 */ 996static int cyber2000fb_blank(int blank, struct fb_info *info) 997{ 998 struct cfb_info *cfb = container_of(info, struct cfb_info, fb); 999 unsigned int sync = 0; 1000 int i; 1001 1002 switch (blank) { 1003 case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */ 1004 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0; 1005 break; 1006 case FB_BLANK_HSYNC_SUSPEND: /* hsync off */ 1007 sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0; 1008 break; 1009 case FB_BLANK_VSYNC_SUSPEND: /* vsync off */ 1010 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL; 1011 break; 1012 case FB_BLANK_NORMAL: /* soft blank */ 1013 default: /* unblank */ 1014 break; 1015 } 1016 1017 cyber2000_grphw(EXT_SYNC_CTL, sync, cfb); 1018 1019 if (blank <= 1) { 1020 /* turn on ramdacs */ 1021 cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS | 1022 RAMDAC_RAMPWRDN); 1023 cyber2000fb_write_ramdac_ctrl(cfb); 1024 } 1025 1026 /* 1027 * Soft blank/unblank the display. 1028 */ 1029 if (blank) { /* soft blank */ 1030 for (i = 0; i < NR_PALETTE; i++) { 1031 cyber2000fb_writeb(i, 0x3c8, cfb); 1032 cyber2000fb_writeb(0, 0x3c9, cfb); 1033 cyber2000fb_writeb(0, 0x3c9, cfb); 1034 cyber2000fb_writeb(0, 0x3c9, cfb); 1035 } 1036 } else { /* unblank */ 1037 for (i = 0; i < NR_PALETTE; i++) { 1038 cyber2000fb_writeb(i, 0x3c8, cfb); 1039 cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb); 1040 cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb); 1041 cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb); 1042 } 1043 } 1044 1045 if (blank >= 2) { 1046 /* turn off ramdacs */ 1047 cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS | 1048 RAMDAC_RAMPWRDN; 1049 cyber2000fb_write_ramdac_ctrl(cfb); 1050 } 1051 1052 return 0; 1053} 1054 1055static const struct fb_ops cyber2000fb_ops = { 1056 .owner = THIS_MODULE, 1057 __FB_DEFAULT_IOMEM_OPS_RDWR, 1058 .fb_check_var = cyber2000fb_check_var, 1059 .fb_set_par = cyber2000fb_set_par, 1060 .fb_setcolreg = cyber2000fb_setcolreg, 1061 .fb_blank = cyber2000fb_blank, 1062 .fb_pan_display = cyber2000fb_pan_display, 1063 .fb_fillrect = cyber2000fb_fillrect, 1064 .fb_copyarea = cyber2000fb_copyarea, 1065 .fb_imageblit = cfb_imageblit, 1066 .fb_sync = cyber2000fb_sync, 1067 __FB_DEFAULT_IOMEM_OPS_MMAP, 1068}; 1069 1070/* 1071 * This is the only "static" reference to the internal data structures 1072 * of this driver. It is here solely at the moment to support the other 1073 * CyberPro modules external to this driver. 1074 */ 1075static struct cfb_info *int_cfb_info; 1076 1077/* 1078 * Enable access to the extended registers 1079 */ 1080void cyber2000fb_enable_extregs(struct cfb_info *cfb) 1081{ 1082 cfb->func_use_count += 1; 1083 1084 if (cfb->func_use_count == 1) { 1085 int old; 1086 1087 old = cyber2000_grphr(EXT_FUNC_CTL, cfb); 1088 old |= EXT_FUNC_CTL_EXTREGENBL; 1089 cyber2000_grphw(EXT_FUNC_CTL, old, cfb); 1090 } 1091} 1092EXPORT_SYMBOL(cyber2000fb_enable_extregs); 1093 1094/* 1095 * Disable access to the extended registers 1096 */ 1097void cyber2000fb_disable_extregs(struct cfb_info *cfb) 1098{ 1099 if (cfb->func_use_count == 1) { 1100 int old; 1101 1102 old = cyber2000_grphr(EXT_FUNC_CTL, cfb); 1103 old &= ~EXT_FUNC_CTL_EXTREGENBL; 1104 cyber2000_grphw(EXT_FUNC_CTL, old, cfb); 1105 } 1106 1107 if (cfb->func_use_count == 0) 1108 printk(KERN_ERR "disable_extregs: count = 0\n"); 1109 else 1110 cfb->func_use_count -= 1; 1111} 1112EXPORT_SYMBOL(cyber2000fb_disable_extregs); 1113 1114/* 1115 * Attach a capture/tv driver to the core CyberX0X0 driver. 1116 */ 1117int cyber2000fb_attach(struct cyberpro_info *info, int idx) 1118{ 1119 if (int_cfb_info != NULL) { 1120 info->dev = int_cfb_info->fb.device; 1121#ifdef CONFIG_FB_CYBER2000_I2C 1122 info->i2c = &int_cfb_info->i2c_adapter; 1123#else 1124 info->i2c = NULL; 1125#endif 1126 info->regs = int_cfb_info->regs; 1127 info->irq = int_cfb_info->irq; 1128 info->fb = int_cfb_info->fb.screen_base; 1129 info->fb_size = int_cfb_info->fb.fix.smem_len; 1130 info->info = int_cfb_info; 1131 1132 strscpy(info->dev_name, int_cfb_info->fb.fix.id, 1133 sizeof(info->dev_name)); 1134 } 1135 1136 return int_cfb_info != NULL; 1137} 1138EXPORT_SYMBOL(cyber2000fb_attach); 1139 1140/* 1141 * Detach a capture/tv driver from the core CyberX0X0 driver. 1142 */ 1143void cyber2000fb_detach(int idx) 1144{ 1145} 1146EXPORT_SYMBOL(cyber2000fb_detach); 1147 1148#ifdef CONFIG_FB_CYBER2000_DDC 1149 1150#define DDC_REG 0xb0 1151#define DDC_SCL_OUT (1 << 0) 1152#define DDC_SDA_OUT (1 << 4) 1153#define DDC_SCL_IN (1 << 2) 1154#define DDC_SDA_IN (1 << 6) 1155 1156static void cyber2000fb_enable_ddc(struct cfb_info *cfb) 1157 __acquires(&cfb->reg_b0_lock) 1158{ 1159 spin_lock(&cfb->reg_b0_lock); 1160 cyber2000fb_writew(0x1bf, 0x3ce, cfb); 1161} 1162 1163static void cyber2000fb_disable_ddc(struct cfb_info *cfb) 1164 __releases(&cfb->reg_b0_lock) 1165{ 1166 cyber2000fb_writew(0x0bf, 0x3ce, cfb); 1167 spin_unlock(&cfb->reg_b0_lock); 1168} 1169 1170 1171static void cyber2000fb_ddc_setscl(void *data, int val) 1172{ 1173 struct cfb_info *cfb = data; 1174 unsigned char reg; 1175 1176 cyber2000fb_enable_ddc(cfb); 1177 reg = cyber2000_grphr(DDC_REG, cfb); 1178 if (!val) /* bit is inverted */ 1179 reg |= DDC_SCL_OUT; 1180 else 1181 reg &= ~DDC_SCL_OUT; 1182 cyber2000_grphw(DDC_REG, reg, cfb); 1183 cyber2000fb_disable_ddc(cfb); 1184} 1185 1186static void cyber2000fb_ddc_setsda(void *data, int val) 1187{ 1188 struct cfb_info *cfb = data; 1189 unsigned char reg; 1190 1191 cyber2000fb_enable_ddc(cfb); 1192 reg = cyber2000_grphr(DDC_REG, cfb); 1193 if (!val) /* bit is inverted */ 1194 reg |= DDC_SDA_OUT; 1195 else 1196 reg &= ~DDC_SDA_OUT; 1197 cyber2000_grphw(DDC_REG, reg, cfb); 1198 cyber2000fb_disable_ddc(cfb); 1199} 1200 1201static int cyber2000fb_ddc_getscl(void *data) 1202{ 1203 struct cfb_info *cfb = data; 1204 int retval; 1205 1206 cyber2000fb_enable_ddc(cfb); 1207 retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SCL_IN); 1208 cyber2000fb_disable_ddc(cfb); 1209 1210 return retval; 1211} 1212 1213static int cyber2000fb_ddc_getsda(void *data) 1214{ 1215 struct cfb_info *cfb = data; 1216 int retval; 1217 1218 cyber2000fb_enable_ddc(cfb); 1219 retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SDA_IN); 1220 cyber2000fb_disable_ddc(cfb); 1221 1222 return retval; 1223} 1224 1225static int cyber2000fb_setup_ddc_bus(struct cfb_info *cfb) 1226{ 1227 strscpy(cfb->ddc_adapter.name, cfb->fb.fix.id, 1228 sizeof(cfb->ddc_adapter.name)); 1229 cfb->ddc_adapter.owner = THIS_MODULE; 1230 cfb->ddc_adapter.algo_data = &cfb->ddc_algo; 1231 cfb->ddc_adapter.dev.parent = cfb->fb.device; 1232 cfb->ddc_algo.setsda = cyber2000fb_ddc_setsda; 1233 cfb->ddc_algo.setscl = cyber2000fb_ddc_setscl; 1234 cfb->ddc_algo.getsda = cyber2000fb_ddc_getsda; 1235 cfb->ddc_algo.getscl = cyber2000fb_ddc_getscl; 1236 cfb->ddc_algo.udelay = 10; 1237 cfb->ddc_algo.timeout = 20; 1238 cfb->ddc_algo.data = cfb; 1239 1240 i2c_set_adapdata(&cfb->ddc_adapter, cfb); 1241 1242 return i2c_bit_add_bus(&cfb->ddc_adapter); 1243} 1244#endif /* CONFIG_FB_CYBER2000_DDC */ 1245 1246#ifdef CONFIG_FB_CYBER2000_I2C 1247static void cyber2000fb_i2c_setsda(void *data, int state) 1248{ 1249 struct cfb_info *cfb = data; 1250 unsigned int latch2; 1251 1252 spin_lock(&cfb->reg_b0_lock); 1253 latch2 = cyber2000_grphr(EXT_LATCH2, cfb); 1254 latch2 &= EXT_LATCH2_I2C_CLKEN; 1255 if (state) 1256 latch2 |= EXT_LATCH2_I2C_DATEN; 1257 cyber2000_grphw(EXT_LATCH2, latch2, cfb); 1258 spin_unlock(&cfb->reg_b0_lock); 1259} 1260 1261static void cyber2000fb_i2c_setscl(void *data, int state) 1262{ 1263 struct cfb_info *cfb = data; 1264 unsigned int latch2; 1265 1266 spin_lock(&cfb->reg_b0_lock); 1267 latch2 = cyber2000_grphr(EXT_LATCH2, cfb); 1268 latch2 &= EXT_LATCH2_I2C_DATEN; 1269 if (state) 1270 latch2 |= EXT_LATCH2_I2C_CLKEN; 1271 cyber2000_grphw(EXT_LATCH2, latch2, cfb); 1272 spin_unlock(&cfb->reg_b0_lock); 1273} 1274 1275static int cyber2000fb_i2c_getsda(void *data) 1276{ 1277 struct cfb_info *cfb = data; 1278 int ret; 1279 1280 spin_lock(&cfb->reg_b0_lock); 1281 ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_DAT); 1282 spin_unlock(&cfb->reg_b0_lock); 1283 1284 return ret; 1285} 1286 1287static int cyber2000fb_i2c_getscl(void *data) 1288{ 1289 struct cfb_info *cfb = data; 1290 int ret; 1291 1292 spin_lock(&cfb->reg_b0_lock); 1293 ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_CLK); 1294 spin_unlock(&cfb->reg_b0_lock); 1295 1296 return ret; 1297} 1298 1299static int cyber2000fb_i2c_register(struct cfb_info *cfb) 1300{ 1301 strscpy(cfb->i2c_adapter.name, cfb->fb.fix.id, 1302 sizeof(cfb->i2c_adapter.name)); 1303 cfb->i2c_adapter.owner = THIS_MODULE; 1304 cfb->i2c_adapter.algo_data = &cfb->i2c_algo; 1305 cfb->i2c_adapter.dev.parent = cfb->fb.device; 1306 cfb->i2c_algo.setsda = cyber2000fb_i2c_setsda; 1307 cfb->i2c_algo.setscl = cyber2000fb_i2c_setscl; 1308 cfb->i2c_algo.getsda = cyber2000fb_i2c_getsda; 1309 cfb->i2c_algo.getscl = cyber2000fb_i2c_getscl; 1310 cfb->i2c_algo.udelay = 5; 1311 cfb->i2c_algo.timeout = msecs_to_jiffies(100); 1312 cfb->i2c_algo.data = cfb; 1313 1314 return i2c_bit_add_bus(&cfb->i2c_adapter); 1315} 1316 1317static void cyber2000fb_i2c_unregister(struct cfb_info *cfb) 1318{ 1319 i2c_del_adapter(&cfb->i2c_adapter); 1320} 1321#else 1322#define cyber2000fb_i2c_register(cfb) (0) 1323#define cyber2000fb_i2c_unregister(cfb) do { } while (0) 1324#endif 1325 1326/* 1327 * These parameters give 1328 * 640x480, hsync 31.5kHz, vsync 60Hz 1329 */ 1330static const struct fb_videomode cyber2000fb_default_mode = { 1331 .refresh = 60, 1332 .xres = 640, 1333 .yres = 480, 1334 .pixclock = 39722, 1335 .left_margin = 56, 1336 .right_margin = 16, 1337 .upper_margin = 34, 1338 .lower_margin = 9, 1339 .hsync_len = 88, 1340 .vsync_len = 2, 1341 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 1342 .vmode = FB_VMODE_NONINTERLACED 1343}; 1344 1345static char igs_regs[] = { 1346 EXT_CRT_IRQ, 0, 1347 EXT_CRT_TEST, 0, 1348 EXT_SYNC_CTL, 0, 1349 EXT_SEG_WRITE_PTR, 0, 1350 EXT_SEG_READ_PTR, 0, 1351 EXT_BIU_MISC, EXT_BIU_MISC_LIN_ENABLE | 1352 EXT_BIU_MISC_COP_ENABLE | 1353 EXT_BIU_MISC_COP_BFC, 1354 EXT_FUNC_CTL, 0, 1355 CURS_H_START, 0, 1356 CURS_H_START + 1, 0, 1357 CURS_H_PRESET, 0, 1358 CURS_V_START, 0, 1359 CURS_V_START + 1, 0, 1360 CURS_V_PRESET, 0, 1361 CURS_CTL, 0, 1362 EXT_ATTRIB_CTL, EXT_ATTRIB_CTL_EXT, 1363 EXT_OVERSCAN_RED, 0, 1364 EXT_OVERSCAN_GREEN, 0, 1365 EXT_OVERSCAN_BLUE, 0, 1366 1367 /* some of these are questionable when we have a BIOS */ 1368 EXT_MEM_CTL0, EXT_MEM_CTL0_7CLK | 1369 EXT_MEM_CTL0_RAS_1 | 1370 EXT_MEM_CTL0_MULTCAS, 1371 EXT_HIDDEN_CTL1, 0x30, 1372 EXT_FIFO_CTL, 0x0b, 1373 EXT_FIFO_CTL + 1, 0x17, 1374 0x76, 0x00, 1375 EXT_HIDDEN_CTL4, 0xc8 1376}; 1377 1378/* 1379 * Initialise the CyberPro hardware. On the CyberPro5XXXX, 1380 * ensure that we're using the correct PLL (5XXX's may be 1381 * programmed to use an additional set of PLLs.) 1382 */ 1383static void cyberpro_init_hw(struct cfb_info *cfb) 1384{ 1385 int i; 1386 1387 for (i = 0; i < sizeof(igs_regs); i += 2) 1388 cyber2000_grphw(igs_regs[i], igs_regs[i + 1], cfb); 1389 1390 if (cfb->id == ID_CYBERPRO_5000) { 1391 unsigned char val; 1392 cyber2000fb_writeb(0xba, 0x3ce, cfb); 1393 val = cyber2000fb_readb(0x3cf, cfb) & 0x80; 1394 cyber2000fb_writeb(val, 0x3cf, cfb); 1395 } 1396} 1397 1398static struct cfb_info *cyberpro_alloc_fb_info(unsigned int id, char *name) 1399{ 1400 struct cfb_info *cfb; 1401 1402 cfb = kzalloc(sizeof(struct cfb_info), GFP_KERNEL); 1403 if (!cfb) 1404 return NULL; 1405 1406 1407 cfb->id = id; 1408 1409 if (id == ID_CYBERPRO_5000) 1410 cfb->ref_ps = 40690; /* 24.576 MHz */ 1411 else 1412 cfb->ref_ps = 69842; /* 14.31818 MHz (69841?) */ 1413 1414 cfb->divisors[0] = 1; 1415 cfb->divisors[1] = 2; 1416 cfb->divisors[2] = 4; 1417 1418 if (id == ID_CYBERPRO_2000) 1419 cfb->divisors[3] = 8; 1420 else 1421 cfb->divisors[3] = 6; 1422 1423 strcpy(cfb->fb.fix.id, name); 1424 1425 cfb->fb.fix.type = FB_TYPE_PACKED_PIXELS; 1426 cfb->fb.fix.type_aux = 0; 1427 cfb->fb.fix.xpanstep = 0; 1428 cfb->fb.fix.ypanstep = 1; 1429 cfb->fb.fix.ywrapstep = 0; 1430 1431 switch (id) { 1432 case ID_IGA_1682: 1433 cfb->fb.fix.accel = 0; 1434 break; 1435 1436 case ID_CYBERPRO_2000: 1437 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000; 1438 break; 1439 1440 case ID_CYBERPRO_2010: 1441 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010; 1442 break; 1443 1444 case ID_CYBERPRO_5000: 1445 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000; 1446 break; 1447 } 1448 1449 cfb->fb.var.nonstd = 0; 1450 cfb->fb.var.activate = FB_ACTIVATE_NOW; 1451 cfb->fb.var.height = -1; 1452 cfb->fb.var.width = -1; 1453 cfb->fb.var.accel_flags = FB_ACCELF_TEXT; 1454 1455 cfb->fb.fbops = &cyber2000fb_ops; 1456 cfb->fb.flags = FBINFO_HWACCEL_YPAN; 1457 cfb->fb.pseudo_palette = cfb->pseudo_palette; 1458 1459 spin_lock_init(&cfb->reg_b0_lock); 1460 1461 fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0); 1462 1463 return cfb; 1464} 1465 1466static void cyberpro_free_fb_info(struct cfb_info *cfb) 1467{ 1468 if (cfb) { 1469 /* 1470 * Free the colourmap 1471 */ 1472 fb_alloc_cmap(&cfb->fb.cmap, 0, 0); 1473 1474 kfree(cfb); 1475 } 1476} 1477 1478/* 1479 * Parse Cyber2000fb options. Usage: 1480 * video=cyber2000:font:fontname 1481 */ 1482#ifndef MODULE 1483static int cyber2000fb_setup(char *options) 1484{ 1485 char *opt; 1486 1487 if (!options || !*options) 1488 return 0; 1489 1490 while ((opt = strsep(&options, ",")) != NULL) { 1491 if (!*opt) 1492 continue; 1493 1494 if (strncmp(opt, "font:", 5) == 0) { 1495 static char default_font_storage[40]; 1496 1497 strscpy(default_font_storage, opt + 5, 1498 sizeof(default_font_storage)); 1499 default_font = default_font_storage; 1500 continue; 1501 } 1502 1503 printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt); 1504 } 1505 return 0; 1506} 1507#endif /* MODULE */ 1508 1509/* 1510 * The CyberPro chips can be placed on many different bus types. 1511 * This probe function is common to all bus types. The bus-specific 1512 * probe function is expected to have: 1513 * - enabled access to the linear memory region 1514 * - memory mapped access to the registers 1515 * - initialised mem_ctl1 and mem_ctl2 appropriately. 1516 */ 1517static int cyberpro_common_probe(struct cfb_info *cfb) 1518{ 1519 u_long smem_size; 1520 u_int h_sync, v_sync; 1521 int err; 1522 1523 cyberpro_init_hw(cfb); 1524 1525 /* 1526 * Get the video RAM size and width from the VGA register. 1527 * This should have been already initialised by the BIOS, 1528 * but if it's garbage, claim default 1MB VRAM (woody) 1529 */ 1530 cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb); 1531 cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb); 1532 1533 /* 1534 * Determine the size of the memory. 1535 */ 1536 switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) { 1537 case MEM_CTL2_SIZE_4MB: 1538 smem_size = 0x00400000; 1539 break; 1540 case MEM_CTL2_SIZE_2MB: 1541 smem_size = 0x00200000; 1542 break; 1543 case MEM_CTL2_SIZE_1MB: 1544 smem_size = 0x00100000; 1545 break; 1546 default: 1547 smem_size = 0x00100000; 1548 break; 1549 } 1550 1551 cfb->fb.fix.smem_len = smem_size; 1552 cfb->fb.fix.mmio_len = MMIO_SIZE; 1553 cfb->fb.screen_base = cfb->region; 1554 1555#ifdef CONFIG_FB_CYBER2000_DDC 1556 if (cyber2000fb_setup_ddc_bus(cfb) == 0) 1557 cfb->ddc_registered = true; 1558#endif 1559 1560 err = -EINVAL; 1561 if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0, 1562 &cyber2000fb_default_mode, 8)) { 1563 printk(KERN_ERR "%s: no valid mode found\n", cfb->fb.fix.id); 1564 goto failed; 1565 } 1566 1567 cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 / 1568 (cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual); 1569 1570 if (cfb->fb.var.yres_virtual < cfb->fb.var.yres) 1571 cfb->fb.var.yres_virtual = cfb->fb.var.yres; 1572 1573/* fb_set_var(&cfb->fb.var, -1, &cfb->fb); */ 1574 1575 /* 1576 * Calculate the hsync and vsync frequencies. Note that 1577 * we split the 1e12 constant up so that we can preserve 1578 * the precision and fit the results into 32-bit registers. 1579 * (1953125000 * 512 = 1e12) 1580 */ 1581 h_sync = 1953125000 / cfb->fb.var.pixclock; 1582 h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin + 1583 cfb->fb.var.right_margin + cfb->fb.var.hsync_len); 1584 v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin + 1585 cfb->fb.var.lower_margin + cfb->fb.var.vsync_len); 1586 1587 printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n", 1588 cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10, 1589 cfb->fb.var.xres, cfb->fb.var.yres, 1590 h_sync / 1000, h_sync % 1000, v_sync); 1591 1592 err = cyber2000fb_i2c_register(cfb); 1593 if (err) 1594 goto failed; 1595 1596 err = register_framebuffer(&cfb->fb); 1597 if (err) 1598 cyber2000fb_i2c_unregister(cfb); 1599 1600failed: 1601#ifdef CONFIG_FB_CYBER2000_DDC 1602 if (err && cfb->ddc_registered) 1603 i2c_del_adapter(&cfb->ddc_adapter); 1604#endif 1605 return err; 1606} 1607 1608static void cyberpro_common_remove(struct cfb_info *cfb) 1609{ 1610 unregister_framebuffer(&cfb->fb); 1611#ifdef CONFIG_FB_CYBER2000_DDC 1612 if (cfb->ddc_registered) 1613 i2c_del_adapter(&cfb->ddc_adapter); 1614#endif 1615 cyber2000fb_i2c_unregister(cfb); 1616} 1617 1618static void cyberpro_common_resume(struct cfb_info *cfb) 1619{ 1620 cyberpro_init_hw(cfb); 1621 1622 /* 1623 * Reprogram the MEM_CTL1 and MEM_CTL2 registers 1624 */ 1625 cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb); 1626 cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb); 1627 1628 /* 1629 * Restore the old video mode and the palette. 1630 * We also need to tell fbcon to redraw the console. 1631 */ 1632 cyber2000fb_set_par(&cfb->fb); 1633} 1634 1635/* 1636 * We need to wake up the CyberPro, and make sure its in linear memory 1637 * mode. Unfortunately, this is specific to the platform and card that 1638 * we are running on. 1639 * 1640 * On x86 and ARM, should we be initialising the CyberPro first via the 1641 * IO registers, and then the MMIO registers to catch all cases? Can we 1642 * end up in the situation where the chip is in MMIO mode, but not awake 1643 * on an x86 system? 1644 */ 1645static int cyberpro_pci_enable_mmio(struct cfb_info *cfb) 1646{ 1647 unsigned char val; 1648 1649#if defined(__sparc_v9__) 1650#error "You lose, consult DaveM." 1651#elif defined(__sparc__) 1652 /* 1653 * SPARC does not have an "outb" instruction, so we generate 1654 * I/O cycles storing into a reserved memory space at 1655 * physical address 0x3000000 1656 */ 1657 unsigned char __iomem *iop; 1658 1659 iop = ioremap(0x3000000, 0x5000); 1660 if (iop == NULL) { 1661 printk(KERN_ERR "iga5000: cannot map I/O\n"); 1662 return -ENOMEM; 1663 } 1664 1665 writeb(0x18, iop + 0x46e8); 1666 writeb(0x01, iop + 0x102); 1667 writeb(0x08, iop + 0x46e8); 1668 writeb(EXT_BIU_MISC, iop + 0x3ce); 1669 writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf); 1670 1671 iounmap(iop); 1672#else 1673 /* 1674 * Most other machine types are "normal", so 1675 * we use the standard IO-based wakeup. 1676 */ 1677 outb(0x18, 0x46e8); 1678 outb(0x01, 0x102); 1679 outb(0x08, 0x46e8); 1680 outb(EXT_BIU_MISC, 0x3ce); 1681 outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf); 1682#endif 1683 1684 /* 1685 * Allow the CyberPro to accept PCI burst accesses 1686 */ 1687 if (cfb->id == ID_CYBERPRO_2010) { 1688 printk(KERN_INFO "%s: NOT enabling PCI bursts\n", 1689 cfb->fb.fix.id); 1690 } else { 1691 val = cyber2000_grphr(EXT_BUS_CTL, cfb); 1692 if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) { 1693 printk(KERN_INFO "%s: enabling PCI bursts\n", 1694 cfb->fb.fix.id); 1695 1696 val |= EXT_BUS_CTL_PCIBURST_WRITE; 1697 1698 if (cfb->id == ID_CYBERPRO_5000) 1699 val |= EXT_BUS_CTL_PCIBURST_READ; 1700 1701 cyber2000_grphw(EXT_BUS_CTL, val, cfb); 1702 } 1703 } 1704 1705 return 0; 1706} 1707 1708static int cyberpro_pci_probe(struct pci_dev *dev, 1709 const struct pci_device_id *id) 1710{ 1711 struct cfb_info *cfb; 1712 char name[16]; 1713 int err; 1714 1715 sprintf(name, "CyberPro%4X", id->device); 1716 1717 err = aperture_remove_conflicting_pci_devices(dev, name); 1718 if (err) 1719 return err; 1720 1721 err = pci_enable_device(dev); 1722 if (err) 1723 return err; 1724 1725 err = -ENOMEM; 1726 cfb = cyberpro_alloc_fb_info(id->driver_data, name); 1727 if (!cfb) 1728 goto failed_release; 1729 1730 err = pci_request_regions(dev, cfb->fb.fix.id); 1731 if (err) 1732 goto failed_regions; 1733 1734 cfb->irq = dev->irq; 1735 cfb->region = pci_ioremap_bar(dev, 0); 1736 if (!cfb->region) { 1737 err = -ENOMEM; 1738 goto failed_ioremap; 1739 } 1740 1741 cfb->regs = cfb->region + MMIO_OFFSET; 1742 cfb->fb.device = &dev->dev; 1743 cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET; 1744 cfb->fb.fix.smem_start = pci_resource_start(dev, 0); 1745 1746 /* 1747 * Bring up the hardware. This is expected to enable access 1748 * to the linear memory region, and allow access to the memory 1749 * mapped registers. Also, mem_ctl1 and mem_ctl2 must be 1750 * initialised. 1751 */ 1752 err = cyberpro_pci_enable_mmio(cfb); 1753 if (err) 1754 goto failed; 1755 1756 /* 1757 * Use MCLK from BIOS. FIXME: what about hotplug? 1758 */ 1759 cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb); 1760 cfb->mclk_div = cyber2000_grphr(EXT_MCLK_DIV, cfb); 1761 1762#ifdef __arm__ 1763 /* 1764 * MCLK on the NetWinder and the Shark is fixed at 75MHz 1765 */ 1766 if (machine_is_netwinder()) { 1767 cfb->mclk_mult = 0xdb; 1768 cfb->mclk_div = 0x54; 1769 } 1770#endif 1771 1772 err = cyberpro_common_probe(cfb); 1773 if (err) 1774 goto failed; 1775 1776 /* 1777 * Our driver data 1778 */ 1779 pci_set_drvdata(dev, cfb); 1780 if (int_cfb_info == NULL) 1781 int_cfb_info = cfb; 1782 1783 return 0; 1784 1785failed: 1786 iounmap(cfb->region); 1787failed_ioremap: 1788 pci_release_regions(dev); 1789failed_regions: 1790 cyberpro_free_fb_info(cfb); 1791failed_release: 1792 pci_disable_device(dev); 1793 return err; 1794} 1795 1796static void cyberpro_pci_remove(struct pci_dev *dev) 1797{ 1798 struct cfb_info *cfb = pci_get_drvdata(dev); 1799 1800 if (cfb) { 1801 cyberpro_common_remove(cfb); 1802 iounmap(cfb->region); 1803 cyberpro_free_fb_info(cfb); 1804 1805 if (cfb == int_cfb_info) 1806 int_cfb_info = NULL; 1807 1808 pci_release_regions(dev); 1809 pci_disable_device(dev); 1810 } 1811} 1812 1813static int __maybe_unused cyberpro_pci_suspend(struct device *dev) 1814{ 1815 return 0; 1816} 1817 1818/* 1819 * Re-initialise the CyberPro hardware 1820 */ 1821static int __maybe_unused cyberpro_pci_resume(struct device *dev) 1822{ 1823 struct cfb_info *cfb = dev_get_drvdata(dev); 1824 1825 if (cfb) { 1826 cyberpro_pci_enable_mmio(cfb); 1827 cyberpro_common_resume(cfb); 1828 } 1829 1830 return 0; 1831} 1832 1833static struct pci_device_id cyberpro_pci_table[] = { 1834/* Not yet 1835 * { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682, 1836 * PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 }, 1837 */ 1838 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000, 1839 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 }, 1840 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010, 1841 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 }, 1842 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000, 1843 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 }, 1844 { 0, } 1845}; 1846 1847MODULE_DEVICE_TABLE(pci, cyberpro_pci_table); 1848 1849static SIMPLE_DEV_PM_OPS(cyberpro_pci_pm_ops, 1850 cyberpro_pci_suspend, 1851 cyberpro_pci_resume); 1852 1853static struct pci_driver cyberpro_driver = { 1854 .name = "CyberPro", 1855 .probe = cyberpro_pci_probe, 1856 .remove = cyberpro_pci_remove, 1857 .driver.pm = &cyberpro_pci_pm_ops, 1858 .id_table = cyberpro_pci_table 1859}; 1860 1861/* 1862 * I don't think we can use the "module_init" stuff here because 1863 * the fbcon stuff may not be initialised yet. Hence the #ifdef 1864 * around module_init. 1865 * 1866 * Tony: "module_init" is now required 1867 */ 1868static int __init cyber2000fb_init(void) 1869{ 1870 int ret = -1, err; 1871 1872#ifndef MODULE 1873 char *option = NULL; 1874#endif 1875 1876 if (fb_modesetting_disabled("CyberPro")) 1877 return -ENODEV; 1878 1879#ifndef MODULE 1880 if (fb_get_options("cyber2000fb", &option)) 1881 return -ENODEV; 1882 cyber2000fb_setup(option); 1883#endif 1884 1885 err = pci_register_driver(&cyberpro_driver); 1886 if (!err) 1887 ret = 0; 1888 1889 return ret ? err : 0; 1890} 1891module_init(cyber2000fb_init); 1892 1893static void __exit cyberpro_exit(void) 1894{ 1895 pci_unregister_driver(&cyberpro_driver); 1896} 1897module_exit(cyberpro_exit); 1898 1899MODULE_AUTHOR("Russell King"); 1900MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver"); 1901MODULE_LICENSE("GPL"); 1902