1// SPDX-License-Identifier: GPL-2.0-only 2 3/* 4 * Driver for Analogix ANX7411 USB Type-C and PD controller 5 * 6 * Copyright(c) 2022, Analogix Semiconductor. All rights reserved. 7 * 8 */ 9#include <linux/gpio/consumer.h> 10#include <linux/i2c.h> 11#include <linux/interrupt.h> 12#include <linux/iopoll.h> 13#include <linux/kernel.h> 14#include <linux/module.h> 15#include <linux/mutex.h> 16#include <linux/of_graph.h> 17#include <linux/of_platform.h> 18#include <linux/pm_runtime.h> 19#include <linux/regulator/consumer.h> 20#include <linux/slab.h> 21#include <linux/types.h> 22#include <linux/usb/pd.h> 23#include <linux/usb/role.h> 24#include <linux/usb/tcpci.h> 25#include <linux/usb/typec.h> 26#include <linux/usb/typec_dp.h> 27#include <linux/usb/typec_mux.h> 28#include <linux/workqueue.h> 29#include <linux/power_supply.h> 30 31#define TCPC_ADDRESS1 0x58 32#define TCPC_ADDRESS2 0x56 33#define TCPC_ADDRESS3 0x54 34#define TCPC_ADDRESS4 0x52 35#define SPI_ADDRESS1 0x7e 36#define SPI_ADDRESS2 0x6e 37#define SPI_ADDRESS3 0x64 38#define SPI_ADDRESS4 0x62 39 40struct anx7411_i2c_select { 41 u8 tcpc_address; 42 u8 spi_address; 43}; 44 45#define VID_ANALOGIX 0x1F29 46#define PID_ANALOGIX 0x7411 47 48/* TCPC register define */ 49 50#define ANALOG_CTRL_10 0xAA 51 52#define STATUS_LEN 2 53#define ALERT_0 0xCB 54#define RECEIVED_MSG BIT(7) 55#define SOFTWARE_INT BIT(6) 56#define MSG_LEN 32 57#define HEADER_LEN 2 58#define MSG_HEADER 0x00 59#define MSG_TYPE 0x01 60#define MSG_RAWDATA 0x02 61#define MSG_LEN_MASK 0x1F 62 63#define ALERT_1 0xCC 64#define INTP_POW_ON BIT(7) 65#define INTP_POW_OFF BIT(6) 66 67#define VBUS_THRESHOLD_H 0xDD 68#define VBUS_THRESHOLD_L 0xDE 69 70#define FW_CTRL_0 0xF0 71#define UNSTRUCT_VDM_EN BIT(0) 72#define DELAY_200MS BIT(1) 73#define VSAFE0 0 74#define VSAFE1 BIT(2) 75#define VSAFE2 BIT(3) 76#define VSAFE3 (BIT(2) | BIT(3)) 77#define FRS_EN BIT(7) 78 79#define FW_PARAM 0xF1 80#define DONGLE_IOP BIT(0) 81 82#define FW_CTRL_2 0xF7 83#define SINK_CTRL_DIS_FLAG BIT(5) 84 85/* SPI register define */ 86#define OCM_CTRL_0 0x6E 87#define OCM_RESET BIT(6) 88 89#define MAX_VOLTAGE 0xAC 90#define MAX_POWER 0xAD 91#define MIN_POWER 0xAE 92 93#define REQUEST_VOLTAGE 0xAF 94#define VOLTAGE_UNIT 100 /* mV per unit */ 95 96#define REQUEST_CURRENT 0xB1 97#define CURRENT_UNIT 50 /* mA per unit */ 98 99#define CMD_SEND_BUF 0xC0 100#define CMD_RECV_BUF 0xE0 101 102#define REQ_VOL_20V_IN_100MV 0xC8 103#define REQ_CUR_2_25A_IN_50MA 0x2D 104#define REQ_CUR_3_25A_IN_50MA 0x41 105 106#define DEF_5V 5000 107#define DEF_1_5A 1500 108 109#define LOBYTE(w) ((u8)((w) & 0xFF)) 110#define HIBYTE(w) ((u8)(((u16)(w) >> 8) & 0xFF)) 111 112enum anx7411_typec_message_type { 113 TYPE_SRC_CAP = 0x00, 114 TYPE_SNK_CAP = 0x01, 115 TYPE_SNK_IDENTITY = 0x02, 116 TYPE_SVID = 0x03, 117 TYPE_SET_SNK_DP_CAP = 0x08, 118 TYPE_PSWAP_REQ = 0x10, 119 TYPE_DSWAP_REQ = 0x11, 120 TYPE_VDM = 0x14, 121 TYPE_OBJ_REQ = 0x16, 122 TYPE_DP_ALT_ENTER = 0x19, 123 TYPE_DP_DISCOVER_MODES_INFO = 0x27, 124 TYPE_GET_DP_CONFIG = 0x29, 125 TYPE_DP_CONFIGURE = 0x2A, 126 TYPE_GET_DP_DISCOVER_MODES_INFO = 0x2E, 127 TYPE_GET_DP_ALT_ENTER = 0x2F, 128}; 129 130#define FW_CTRL_1 0xB2 131#define AUTO_PD_EN BIT(1) 132#define TRYSRC_EN BIT(2) 133#define TRYSNK_EN BIT(3) 134#define FORCE_SEND_RDO BIT(6) 135 136#define FW_VER 0xB4 137#define FW_SUBVER 0xB5 138 139#define INT_MASK 0xB6 140#define INT_STS 0xB7 141#define OCM_BOOT_UP BIT(0) 142#define OC_OV_EVENT BIT(1) 143#define VCONN_CHANGE BIT(2) 144#define VBUS_CHANGE BIT(3) 145#define CC_STATUS_CHANGE BIT(4) 146#define DATA_ROLE_CHANGE BIT(5) 147#define PR_CONSUMER_GOT_POWER BIT(6) 148#define HPD_STATUS_CHANGE BIT(7) 149 150#define SYSTEM_STSTUS 0xB8 151/* 0: SINK off; 1: SINK on */ 152#define SINK_STATUS BIT(1) 153/* 0: VCONN off; 1: VCONN on*/ 154#define VCONN_STATUS BIT(2) 155/* 0: vbus off; 1: vbus on*/ 156#define VBUS_STATUS BIT(3) 157/* 1: host; 0:device*/ 158#define DATA_ROLE BIT(5) 159/* 0: Chunking; 1: Unchunked*/ 160#define SUPPORT_UNCHUNKING BIT(6) 161/* 0: HPD low; 1: HPD high*/ 162#define HPD_STATUS BIT(7) 163 164#define DATA_DFP 1 165#define DATA_UFP 2 166#define POWER_SOURCE 1 167#define POWER_SINK 2 168 169#define CC_STATUS 0xB9 170#define CC1_RD BIT(0) 171#define CC2_RD BIT(4) 172#define CC1_RA BIT(1) 173#define CC2_RA BIT(5) 174#define CC1_RD BIT(0) 175#define CC1_RP(cc) (((cc) >> 2) & 0x03) 176#define CC2_RP(cc) (((cc) >> 6) & 0x03) 177 178#define PD_REV_INIT 0xBA 179 180#define PD_EXT_MSG_CTRL 0xBB 181#define SRC_CAP_EXT_REPLY BIT(0) 182#define MANUFACTURER_INFO_REPLY BIT(1) 183#define BATTERY_STS_REPLY BIT(2) 184#define BATTERY_CAP_REPLY BIT(3) 185#define ALERT_REPLY BIT(4) 186#define STATUS_REPLY BIT(5) 187#define PPS_STATUS_REPLY BIT(6) 188#define SNK_CAP_EXT_REPLY BIT(7) 189 190#define NO_CONNECT 0x00 191#define USB3_1_CONNECTED 0x01 192#define DP_ALT_4LANES 0x02 193#define USB3_1_DP_2LANES 0x03 194#define CC1_CONNECTED 0x01 195#define CC2_CONNECTED 0x02 196#define SELECT_PIN_ASSIGMENT_C 0x04 197#define SELECT_PIN_ASSIGMENT_D 0x08 198#define SELECT_PIN_ASSIGMENT_E 0x10 199#define SELECT_PIN_ASSIGMENT_U 0x00 200#define REDRIVER_ADDRESS 0x20 201#define REDRIVER_OFFSET 0x00 202 203#define DP_SVID 0xFF01 204#define VDM_ACK 0x40 205#define VDM_CMD_RES 0x00 206#define VDM_CMD_DIS_ID 0x01 207#define VDM_CMD_DIS_SVID 0x02 208#define VDM_CMD_DIS_MOD 0x03 209#define VDM_CMD_ENTER_MODE 0x04 210#define VDM_CMD_EXIT_MODE 0x05 211#define VDM_CMD_ATTENTION 0x06 212#define VDM_CMD_GET_STS 0x10 213#define VDM_CMD_AND_ACK_MASK 0x5F 214 215#define MAX_ALTMODE 2 216 217#define HAS_SOURCE_CAP BIT(0) 218#define HAS_SINK_CAP BIT(1) 219#define HAS_SINK_WATT BIT(2) 220 221enum anx7411_psy_state { 222 /* copy from drivers/usb/typec/tcpm */ 223 ANX7411_PSY_OFFLINE = 0, 224 ANX7411_PSY_FIXED_ONLINE, 225 226 /* private */ 227 /* PD keep in, but disconnct power to bq25700, 228 * this state can be active when higher capacity adapter plug in, 229 * and change to ONLINE state when higher capacity adapter plug out 230 */ 231 ANX7411_PSY_HANG = 0xff, 232}; 233 234struct typec_params { 235 int request_current; /* ma */ 236 int request_voltage; /* mv */ 237 int cc_connect; 238 int cc_orientation_valid; 239 int cc_status; 240 int data_role; 241 int power_role; 242 int vconn_role; 243 int dp_altmode_enter; 244 int cust_altmode_enter; 245 struct usb_role_switch *role_sw; 246 struct typec_port *port; 247 struct typec_partner *partner; 248 struct typec_mux_dev *typec_mux; 249 struct typec_switch_dev *typec_switch; 250 struct typec_altmode *amode[MAX_ALTMODE]; 251 struct typec_altmode *port_amode[MAX_ALTMODE]; 252 struct typec_displayport_data data; 253 int pin_assignment; 254 struct typec_capability caps; 255 u32 src_pdo[PDO_MAX_OBJECTS]; 256 u32 sink_pdo[PDO_MAX_OBJECTS]; 257 u8 caps_flags; 258 u8 src_pdo_nr; 259 u8 sink_pdo_nr; 260 u8 sink_watt; 261 u8 sink_voltage; 262}; 263 264#define MAX_BUF_LEN 30 265struct fw_msg { 266 u8 msg_len; 267 u8 msg_type; 268 u8 buf[MAX_BUF_LEN]; 269} __packed; 270 271struct anx7411_data { 272 int fw_version; 273 int fw_subversion; 274 struct i2c_client *tcpc_client; 275 struct i2c_client *spi_client; 276 struct fw_msg send_msg; 277 struct fw_msg recv_msg; 278 struct gpio_desc *intp_gpiod; 279 struct fwnode_handle *connector_fwnode; 280 struct typec_params typec; 281 int intp_irq; 282 struct work_struct work; 283 struct workqueue_struct *workqueue; 284 /* Lock for interrupt work queue */ 285 struct mutex lock; 286 287 enum anx7411_psy_state psy_online; 288 enum power_supply_usb_type usb_type; 289 struct power_supply *psy; 290 struct power_supply_desc psy_desc; 291 struct device *dev; 292}; 293 294static u8 snk_identity[] = { 295 LOBYTE(VID_ANALOGIX), HIBYTE(VID_ANALOGIX), 0x00, 0x82, /* snk_id_hdr */ 296 0x00, 0x00, 0x00, 0x00, /* snk_cert */ 297 0x00, 0x00, LOBYTE(PID_ANALOGIX), HIBYTE(PID_ANALOGIX), /* 5snk_ama */ 298}; 299 300static u8 dp_caps[4] = {0xC6, 0x00, 0x00, 0x00}; 301 302static int anx7411_reg_read(struct i2c_client *client, 303 u8 reg_addr) 304{ 305 return i2c_smbus_read_byte_data(client, reg_addr); 306} 307 308static int anx7411_reg_block_read(struct i2c_client *client, 309 u8 reg_addr, u8 len, u8 *buf) 310{ 311 return i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf); 312} 313 314static int anx7411_reg_write(struct i2c_client *client, 315 u8 reg_addr, u8 reg_val) 316{ 317 return i2c_smbus_write_byte_data(client, reg_addr, reg_val); 318} 319 320static int anx7411_reg_block_write(struct i2c_client *client, 321 u8 reg_addr, u8 len, u8 *buf) 322{ 323 return i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf); 324} 325 326static struct anx7411_i2c_select anx7411_i2c_addr[] = { 327 {TCPC_ADDRESS1, SPI_ADDRESS1}, 328 {TCPC_ADDRESS2, SPI_ADDRESS2}, 329 {TCPC_ADDRESS3, SPI_ADDRESS3}, 330 {TCPC_ADDRESS4, SPI_ADDRESS4}, 331}; 332 333static int anx7411_detect_power_mode(struct anx7411_data *ctx) 334{ 335 int ret; 336 int mode; 337 338 ret = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT); 339 if (ret < 0) 340 return ret; 341 342 ctx->typec.request_current = ret * CURRENT_UNIT; /* 50ma per unit */ 343 344 ret = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE); 345 if (ret < 0) 346 return ret; 347 348 ctx->typec.request_voltage = ret * VOLTAGE_UNIT; /* 100mv per unit */ 349 350 if (ctx->psy_online == ANX7411_PSY_OFFLINE) { 351 ctx->psy_online = ANX7411_PSY_FIXED_ONLINE; 352 ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD; 353 power_supply_changed(ctx->psy); 354 } 355 356 if (!ctx->typec.cc_orientation_valid) 357 return 0; 358 359 if (ctx->typec.cc_connect == CC1_CONNECTED) 360 mode = CC1_RP(ctx->typec.cc_status); 361 else 362 mode = CC2_RP(ctx->typec.cc_status); 363 if (mode) { 364 typec_set_pwr_opmode(ctx->typec.port, mode - 1); 365 return 0; 366 } 367 368 typec_set_pwr_opmode(ctx->typec.port, TYPEC_PWR_MODE_PD); 369 370 return 0; 371} 372 373static int anx7411_register_partner(struct anx7411_data *ctx, 374 int pd, int accessory) 375{ 376 struct typec_partner_desc desc; 377 struct typec_partner *partner; 378 379 if (ctx->typec.partner) 380 return 0; 381 382 desc.usb_pd = pd; 383 desc.accessory = accessory; 384 desc.identity = NULL; 385 partner = typec_register_partner(ctx->typec.port, &desc); 386 if (IS_ERR(partner)) 387 return PTR_ERR(partner); 388 389 ctx->typec.partner = partner; 390 391 return 0; 392} 393 394static int anx7411_detect_cc_orientation(struct anx7411_data *ctx) 395{ 396 struct device *dev = &ctx->spi_client->dev; 397 int ret; 398 int cc1_rd, cc2_rd; 399 int cc1_ra, cc2_ra; 400 int cc1_rp, cc2_rp; 401 402 ret = anx7411_reg_read(ctx->spi_client, CC_STATUS); 403 if (ret < 0) 404 return ret; 405 406 ctx->typec.cc_status = ret; 407 408 cc1_rd = ret & CC1_RD ? 1 : 0; 409 cc2_rd = ret & CC2_RD ? 1 : 0; 410 cc1_ra = ret & CC1_RA ? 1 : 0; 411 cc2_ra = ret & CC2_RA ? 1 : 0; 412 cc1_rp = CC1_RP(ret); 413 cc2_rp = CC2_RP(ret); 414 415 /* Debug cable, nothing to do */ 416 if (cc1_rd && cc2_rd) { 417 ctx->typec.cc_orientation_valid = 0; 418 return anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_DEBUG); 419 } 420 421 if (cc1_ra && cc2_ra) { 422 ctx->typec.cc_orientation_valid = 0; 423 return anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_AUDIO); 424 } 425 426 ctx->typec.cc_orientation_valid = 1; 427 428 ret = anx7411_register_partner(ctx, 1, TYPEC_ACCESSORY_NONE); 429 if (ret) { 430 dev_err(dev, "register partner\n"); 431 return ret; 432 } 433 434 if (cc1_rd || cc1_rp) { 435 typec_set_orientation(ctx->typec.port, TYPEC_ORIENTATION_NORMAL); 436 ctx->typec.cc_connect = CC1_CONNECTED; 437 } 438 439 if (cc2_rd || cc2_rp) { 440 typec_set_orientation(ctx->typec.port, TYPEC_ORIENTATION_REVERSE); 441 ctx->typec.cc_connect = CC2_CONNECTED; 442 } 443 444 return 0; 445} 446 447static int anx7411_set_mux(struct anx7411_data *ctx, int pin_assignment) 448{ 449 int mode = TYPEC_STATE_SAFE; 450 451 switch (pin_assignment) { 452 case SELECT_PIN_ASSIGMENT_U: 453 /* default 4 line USB 3.1 */ 454 mode = TYPEC_STATE_MODAL; 455 break; 456 case SELECT_PIN_ASSIGMENT_C: 457 case SELECT_PIN_ASSIGMENT_E: 458 /* 4 line DP */ 459 mode = TYPEC_STATE_SAFE; 460 break; 461 case SELECT_PIN_ASSIGMENT_D: 462 /* 2 line DP, 2 line USB */ 463 mode = TYPEC_MODE_USB3; 464 break; 465 default: 466 mode = TYPEC_STATE_SAFE; 467 break; 468 } 469 470 ctx->typec.pin_assignment = pin_assignment; 471 472 return typec_set_mode(ctx->typec.port, mode); 473} 474 475static int anx7411_set_usb_role(struct anx7411_data *ctx, enum usb_role role) 476{ 477 if (!ctx->typec.role_sw) 478 return 0; 479 480 return usb_role_switch_set_role(ctx->typec.role_sw, role); 481} 482 483static int anx7411_data_role_detect(struct anx7411_data *ctx) 484{ 485 int ret; 486 487 ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS); 488 if (ret < 0) 489 return ret; 490 491 ctx->typec.data_role = (ret & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE; 492 ctx->typec.vconn_role = (ret & VCONN_STATUS) ? TYPEC_SOURCE : TYPEC_SINK; 493 494 typec_set_data_role(ctx->typec.port, ctx->typec.data_role); 495 496 typec_set_vconn_role(ctx->typec.port, ctx->typec.vconn_role); 497 498 if (ctx->typec.data_role == TYPEC_HOST) 499 return anx7411_set_usb_role(ctx, USB_ROLE_HOST); 500 501 return anx7411_set_usb_role(ctx, USB_ROLE_DEVICE); 502} 503 504static int anx7411_power_role_detect(struct anx7411_data *ctx) 505{ 506 int ret; 507 508 ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS); 509 if (ret < 0) 510 return ret; 511 512 ctx->typec.power_role = (ret & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE; 513 514 if (ctx->typec.power_role == TYPEC_SOURCE) { 515 ctx->typec.request_current = DEF_1_5A; 516 ctx->typec.request_voltage = DEF_5V; 517 } 518 519 typec_set_pwr_role(ctx->typec.port, ctx->typec.power_role); 520 521 return 0; 522} 523 524static int anx7411_cc_status_detect(struct anx7411_data *ctx) 525{ 526 anx7411_detect_cc_orientation(ctx); 527 anx7411_detect_power_mode(ctx); 528 529 return 0; 530} 531 532static void anx7411_partner_unregister_altmode(struct anx7411_data *ctx) 533{ 534 int i; 535 536 ctx->typec.dp_altmode_enter = 0; 537 ctx->typec.cust_altmode_enter = 0; 538 539 for (i = 0; i < MAX_ALTMODE; i++) 540 if (ctx->typec.amode[i]) { 541 typec_unregister_altmode(ctx->typec.amode[i]); 542 ctx->typec.amode[i] = NULL; 543 } 544 545 ctx->typec.pin_assignment = 0; 546} 547 548static int anx7411_typec_register_altmode(struct anx7411_data *ctx, 549 int svid, int vdo) 550{ 551 struct device *dev = &ctx->spi_client->dev; 552 struct typec_altmode_desc desc; 553 int err; 554 int i; 555 556 desc.svid = svid; 557 desc.vdo = vdo; 558 559 for (i = 0; i < MAX_ALTMODE; i++) 560 if (!ctx->typec.amode[i]) 561 break; 562 563 desc.mode = i + 1; /* start with 1 */ 564 565 if (i >= MAX_ALTMODE) { 566 dev_err(dev, "no altmode space for registering\n"); 567 return -ENOMEM; 568 } 569 570 ctx->typec.amode[i] = typec_partner_register_altmode(ctx->typec.partner, 571 &desc); 572 if (IS_ERR(ctx->typec.amode[i])) { 573 dev_err(dev, "failed to register altmode\n"); 574 err = PTR_ERR(ctx->typec.amode[i]); 575 ctx->typec.amode[i] = NULL; 576 return err; 577 } 578 579 return 0; 580} 581 582static void anx7411_unregister_partner(struct anx7411_data *ctx) 583{ 584 if (ctx->typec.partner) { 585 typec_unregister_partner(ctx->typec.partner); 586 ctx->typec.partner = NULL; 587 } 588} 589 590static int anx7411_update_altmode(struct anx7411_data *ctx, int svid) 591{ 592 int i; 593 594 if (svid == DP_SVID) 595 ctx->typec.dp_altmode_enter = 1; 596 else 597 ctx->typec.cust_altmode_enter = 1; 598 599 for (i = 0; i < MAX_ALTMODE; i++) { 600 if (!ctx->typec.amode[i]) 601 continue; 602 603 if (ctx->typec.amode[i]->svid == svid) { 604 typec_altmode_update_active(ctx->typec.amode[i], true); 605 typec_altmode_notify(ctx->typec.amode[i], 606 ctx->typec.pin_assignment, 607 &ctx->typec.data); 608 break; 609 } 610 } 611 612 return 0; 613} 614 615static int anx7411_register_altmode(struct anx7411_data *ctx, 616 bool dp_altmode, u8 *buf) 617{ 618 int ret; 619 int svid; 620 int mid; 621 622 if (!ctx->typec.partner) 623 return 0; 624 625 svid = DP_SVID; 626 if (dp_altmode) { 627 mid = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24); 628 629 return anx7411_typec_register_altmode(ctx, svid, mid); 630 } 631 632 svid = (buf[3] << 8) | buf[2]; 633 if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_ENTER_MODE)) 634 return anx7411_update_altmode(ctx, svid); 635 636 if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_DIS_MOD)) 637 return 0; 638 639 mid = buf[4] | (buf[5] << 8) | (buf[6] << 16) | (buf[7] << 24); 640 641 ret = anx7411_typec_register_altmode(ctx, svid, mid); 642 if (ctx->typec.cust_altmode_enter) 643 ret |= anx7411_update_altmode(ctx, svid); 644 645 return ret; 646} 647 648static int anx7411_parse_cmd(struct anx7411_data *ctx, u8 type, u8 *buf, u8 len) 649{ 650 struct device *dev = &ctx->spi_client->dev; 651 u8 cur_50ma, vol_100mv; 652 653 switch (type) { 654 case TYPE_SRC_CAP: 655 cur_50ma = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT); 656 vol_100mv = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE); 657 658 ctx->typec.request_voltage = vol_100mv * VOLTAGE_UNIT; 659 ctx->typec.request_current = cur_50ma * CURRENT_UNIT; 660 661 ctx->psy_online = ANX7411_PSY_FIXED_ONLINE; 662 ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD; 663 power_supply_changed(ctx->psy); 664 break; 665 case TYPE_SNK_CAP: 666 break; 667 case TYPE_SVID: 668 break; 669 case TYPE_SNK_IDENTITY: 670 break; 671 case TYPE_GET_DP_ALT_ENTER: 672 /* DP alt mode enter success */ 673 if (buf[0]) 674 anx7411_update_altmode(ctx, DP_SVID); 675 break; 676 case TYPE_DP_ALT_ENTER: 677 /* Update DP altmode */ 678 anx7411_update_altmode(ctx, DP_SVID); 679 break; 680 case TYPE_OBJ_REQ: 681 anx7411_detect_power_mode(ctx); 682 break; 683 case TYPE_DP_CONFIGURE: 684 anx7411_set_mux(ctx, buf[1]); 685 break; 686 case TYPE_DP_DISCOVER_MODES_INFO: 687 /* Make sure discover modes valid */ 688 if (buf[0] | buf[1]) 689 /* Register DP Altmode */ 690 anx7411_register_altmode(ctx, 1, buf); 691 break; 692 case TYPE_VDM: 693 /* Register other altmode */ 694 anx7411_register_altmode(ctx, 0, buf); 695 break; 696 default: 697 dev_err(dev, "ignore message(0x%.02x).\n", type); 698 break; 699 } 700 701 return 0; 702} 703 704static u8 checksum(struct device *dev, u8 *buf, u8 len) 705{ 706 u8 ret = 0; 707 u8 i; 708 709 for (i = 0; i < len; i++) 710 ret += buf[i]; 711 712 return ret; 713} 714 715static int anx7411_read_msg_ctrl_status(struct i2c_client *client) 716{ 717 return anx7411_reg_read(client, CMD_SEND_BUF); 718} 719 720static int anx7411_wait_msg_empty(struct i2c_client *client) 721{ 722 int val; 723 724 return readx_poll_timeout(anx7411_read_msg_ctrl_status, 725 client, val, (val < 0) || (val == 0), 726 2000, 2000 * 150); 727} 728 729static int anx7411_send_msg(struct anx7411_data *ctx, u8 type, u8 *buf, u8 size) 730{ 731 struct device *dev = &ctx->spi_client->dev; 732 struct fw_msg *msg = &ctx->send_msg; 733 u8 crc; 734 int ret; 735 736 size = min_t(u8, size, (u8)MAX_BUF_LEN); 737 memcpy(msg->buf, buf, size); 738 msg->msg_type = type; 739 /* msg len equals buffer length + msg_type */ 740 msg->msg_len = size + 1; 741 742 /* Do CRC check for all buffer data and msg_len and msg_type */ 743 crc = checksum(dev, (u8 *)msg, size + HEADER_LEN); 744 msg->buf[size] = 0 - crc; 745 746 ret = anx7411_wait_msg_empty(ctx->spi_client); 747 if (ret) 748 return ret; 749 750 ret = anx7411_reg_block_write(ctx->spi_client, 751 CMD_SEND_BUF + 1, size + HEADER_LEN, 752 &msg->msg_type); 753 ret |= anx7411_reg_write(ctx->spi_client, CMD_SEND_BUF, 754 msg->msg_len); 755 return ret; 756} 757 758static int anx7411_process_cmd(struct anx7411_data *ctx) 759{ 760 struct device *dev = &ctx->spi_client->dev; 761 struct fw_msg *msg = &ctx->recv_msg; 762 u8 len; 763 u8 crc; 764 int ret; 765 766 /* Read message from firmware */ 767 ret = anx7411_reg_block_read(ctx->spi_client, CMD_RECV_BUF, 768 MSG_LEN, (u8 *)msg); 769 if (ret < 0) 770 return 0; 771 772 if (!msg->msg_len) 773 return 0; 774 775 ret = anx7411_reg_write(ctx->spi_client, CMD_RECV_BUF, 0); 776 if (ret) 777 return ret; 778 779 len = msg->msg_len & MSG_LEN_MASK; 780 crc = checksum(dev, (u8 *)msg, len + HEADER_LEN); 781 if (crc) { 782 dev_err(dev, "message error crc(0x%.02x)\n", crc); 783 return -ERANGE; 784 } 785 786 return anx7411_parse_cmd(ctx, msg->msg_type, msg->buf, len - 1); 787} 788 789static void anx7411_translate_payload(struct device *dev, __le32 *payload, 790 u32 *pdo, int nr, const char *type) 791{ 792 int i; 793 794 if (nr > PDO_MAX_OBJECTS) { 795 dev_err(dev, "nr(%d) exceed PDO_MAX_OBJECTS(%d)\n", 796 nr, PDO_MAX_OBJECTS); 797 798 return; 799 } 800 801 for (i = 0; i < nr; i++) 802 payload[i] = cpu_to_le32(pdo[i]); 803} 804 805static int anx7411_config(struct anx7411_data *ctx) 806{ 807 struct device *dev = &ctx->spi_client->dev; 808 struct typec_params *typecp = &ctx->typec; 809 __le32 payload[PDO_MAX_OBJECTS]; 810 int ret; 811 812 /* Config PD FW work under PD 2.0 */ 813 ret = anx7411_reg_write(ctx->spi_client, PD_REV_INIT, PD_REV20); 814 ret |= anx7411_reg_write(ctx->tcpc_client, FW_CTRL_0, 815 UNSTRUCT_VDM_EN | DELAY_200MS | 816 VSAFE1 | FRS_EN); 817 ret |= anx7411_reg_write(ctx->spi_client, FW_CTRL_1, 818 AUTO_PD_EN | FORCE_SEND_RDO); 819 820 /* Set VBUS current threshold */ 821 ret |= anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_H, 0xff); 822 ret |= anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_L, 0x03); 823 824 /* Fix dongle compatible issue */ 825 ret |= anx7411_reg_write(ctx->tcpc_client, FW_PARAM, 826 anx7411_reg_read(ctx->tcpc_client, FW_PARAM) | 827 DONGLE_IOP); 828 ret |= anx7411_reg_write(ctx->spi_client, INT_MASK, 0); 829 830 ret |= anx7411_reg_write(ctx->spi_client, PD_EXT_MSG_CTRL, 0xFF); 831 if (ret) 832 return ret; 833 834 if (typecp->caps_flags & HAS_SOURCE_CAP) { 835 anx7411_translate_payload(dev, payload, typecp->src_pdo, 836 typecp->src_pdo_nr, "source"); 837 anx7411_send_msg(ctx, TYPE_SRC_CAP, (u8 *)&payload, 838 typecp->src_pdo_nr * 4); 839 anx7411_send_msg(ctx, TYPE_SNK_IDENTITY, snk_identity, 840 sizeof(snk_identity)); 841 anx7411_send_msg(ctx, TYPE_SET_SNK_DP_CAP, dp_caps, 842 sizeof(dp_caps)); 843 } 844 845 if (typecp->caps_flags & HAS_SINK_CAP) { 846 anx7411_translate_payload(dev, payload, typecp->sink_pdo, 847 typecp->sink_pdo_nr, "sink"); 848 anx7411_send_msg(ctx, TYPE_SNK_CAP, (u8 *)&payload, 849 typecp->sink_pdo_nr * 4); 850 } 851 852 if (typecp->caps_flags & HAS_SINK_WATT) { 853 if (typecp->sink_watt) { 854 ret |= anx7411_reg_write(ctx->spi_client, MAX_POWER, 855 typecp->sink_watt); 856 /* Set min power to 1W */ 857 ret |= anx7411_reg_write(ctx->spi_client, MIN_POWER, 2); 858 } 859 860 if (typecp->sink_voltage) 861 ret |= anx7411_reg_write(ctx->spi_client, MAX_VOLTAGE, 862 typecp->sink_voltage); 863 if (ret) 864 return ret; 865 } 866 867 if (!typecp->caps_flags) 868 usleep_range(5000, 6000); 869 870 ctx->fw_version = anx7411_reg_read(ctx->spi_client, FW_VER); 871 ctx->fw_subversion = anx7411_reg_read(ctx->spi_client, FW_SUBVER); 872 873 return 0; 874} 875 876static void anx7411_chip_standby(struct anx7411_data *ctx) 877{ 878 int ret; 879 u8 cc1, cc2; 880 struct device *dev = &ctx->spi_client->dev; 881 882 ret = anx7411_reg_write(ctx->spi_client, OCM_CTRL_0, 883 anx7411_reg_read(ctx->spi_client, OCM_CTRL_0) | 884 OCM_RESET); 885 ret |= anx7411_reg_write(ctx->tcpc_client, ANALOG_CTRL_10, 0x80); 886 /* Set TCPC to RD and DRP enable */ 887 cc1 = TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT; 888 cc2 = TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT; 889 ret |= anx7411_reg_write(ctx->tcpc_client, TCPC_ROLE_CTRL, 890 TCPC_ROLE_CTRL_DRP | cc1 | cc2); 891 892 /* Send DRP toggle command */ 893 ret |= anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND, 894 TCPC_CMD_LOOK4CONNECTION); 895 896 /* Send TCPC enter standby command */ 897 ret |= anx7411_reg_write(ctx->tcpc_client, 898 TCPC_COMMAND, TCPC_CMD_I2C_IDLE); 899 if (ret) 900 dev_err(dev, "Chip standby failed\n"); 901} 902 903static void anx7411_work_func(struct work_struct *work) 904{ 905 int ret; 906 u8 buf[STATUS_LEN]; 907 u8 int_change; /* Interrupt change */ 908 u8 int_status; /* Firmware status update */ 909 u8 alert0, alert1; /* Interrupt alert source */ 910 struct anx7411_data *ctx = container_of(work, struct anx7411_data, work); 911 struct device *dev = &ctx->spi_client->dev; 912 913 mutex_lock(&ctx->lock); 914 915 /* Read interrupt change status */ 916 ret = anx7411_reg_block_read(ctx->spi_client, INT_STS, STATUS_LEN, buf); 917 if (ret < 0) { 918 /* Power standby mode, just return */ 919 goto unlock; 920 } 921 int_change = buf[0]; 922 int_status = buf[1]; 923 924 /* Read alert register */ 925 ret = anx7411_reg_block_read(ctx->tcpc_client, ALERT_0, STATUS_LEN, buf); 926 if (ret < 0) 927 goto unlock; 928 929 alert0 = buf[0]; 930 alert1 = buf[1]; 931 932 /* Clear interrupt and alert status */ 933 ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0); 934 ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_0, alert0); 935 ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_1, alert1); 936 if (ret) 937 goto unlock; 938 939 if (alert1 & INTP_POW_OFF) { 940 anx7411_partner_unregister_altmode(ctx); 941 if (anx7411_set_usb_role(ctx, USB_ROLE_NONE)) 942 dev_err(dev, "Set usb role\n"); 943 anx7411_unregister_partner(ctx); 944 ctx->psy_online = ANX7411_PSY_OFFLINE; 945 ctx->usb_type = POWER_SUPPLY_USB_TYPE_C; 946 ctx->typec.request_voltage = 0; 947 ctx->typec.request_current = 0; 948 power_supply_changed(ctx->psy); 949 anx7411_chip_standby(ctx); 950 goto unlock; 951 } 952 953 if ((alert0 & SOFTWARE_INT) && (int_change & OCM_BOOT_UP)) { 954 if (anx7411_config(ctx)) 955 dev_err(dev, "Config failed\n"); 956 if (anx7411_data_role_detect(ctx)) 957 dev_err(dev, "set PD data role\n"); 958 if (anx7411_power_role_detect(ctx)) 959 dev_err(dev, "set PD power role\n"); 960 anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C); 961 } 962 963 if (alert0 & RECEIVED_MSG) 964 anx7411_process_cmd(ctx); 965 966 ret = (int_status & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE; 967 if (ctx->typec.data_role != ret) 968 if (anx7411_data_role_detect(ctx)) 969 dev_err(dev, "set PD data role\n"); 970 971 ret = (int_status & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE; 972 if (ctx->typec.power_role != ret) 973 if (anx7411_power_role_detect(ctx)) 974 dev_err(dev, "set PD power role\n"); 975 976 if ((alert0 & SOFTWARE_INT) && (int_change & CC_STATUS_CHANGE)) 977 anx7411_cc_status_detect(ctx); 978 979unlock: 980 mutex_unlock(&ctx->lock); 981} 982 983static irqreturn_t anx7411_intr_isr(int irq, void *data) 984{ 985 struct anx7411_data *ctx = (struct anx7411_data *)data; 986 987 queue_work(ctx->workqueue, &ctx->work); 988 989 return IRQ_HANDLED; 990} 991 992static int anx7411_register_i2c_dummy_clients(struct anx7411_data *ctx, 993 struct i2c_client *client) 994{ 995 int i; 996 u8 spi_addr; 997 998 for (i = 0; i < ARRAY_SIZE(anx7411_i2c_addr); i++) { 999 if (client->addr == (anx7411_i2c_addr[i].tcpc_address >> 1)) { 1000 spi_addr = anx7411_i2c_addr[i].spi_address >> 1; 1001 ctx->spi_client = i2c_new_dummy_device(client->adapter, 1002 spi_addr); 1003 if (!IS_ERR(ctx->spi_client)) 1004 return 0; 1005 } 1006 } 1007 1008 dev_err(&client->dev, "unable to get SPI slave\n"); 1009 return -ENOMEM; 1010} 1011 1012static void anx7411_port_unregister_altmodes(struct typec_altmode **adev) 1013{ 1014 int i; 1015 1016 for (i = 0; i < MAX_ALTMODE; i++) 1017 if (adev[i]) { 1018 typec_unregister_altmode(adev[i]); 1019 adev[i] = NULL; 1020 } 1021} 1022 1023static int anx7411_usb_mux_set(struct typec_mux_dev *mux, 1024 struct typec_mux_state *state) 1025{ 1026 struct anx7411_data *ctx = typec_mux_get_drvdata(mux); 1027 struct device *dev = &ctx->spi_client->dev; 1028 int has_dp; 1029 1030 has_dp = (state->alt && state->alt->svid == USB_TYPEC_DP_SID && 1031 state->alt->mode == USB_TYPEC_DP_MODE); 1032 if (!has_dp) 1033 dev_err(dev, "dp altmode not register\n"); 1034 1035 return 0; 1036} 1037 1038static int anx7411_usb_set_orientation(struct typec_switch_dev *sw, 1039 enum typec_orientation orientation) 1040{ 1041 /* No need set */ 1042 1043 return 0; 1044} 1045 1046static int anx7411_register_switch(struct anx7411_data *ctx, 1047 struct device *dev, 1048 struct fwnode_handle *fwnode) 1049{ 1050 struct typec_switch_desc sw_desc = { }; 1051 1052 sw_desc.fwnode = fwnode; 1053 sw_desc.drvdata = ctx; 1054 sw_desc.name = fwnode_get_name(fwnode); 1055 sw_desc.set = anx7411_usb_set_orientation; 1056 1057 ctx->typec.typec_switch = typec_switch_register(dev, &sw_desc); 1058 if (IS_ERR(ctx->typec.typec_switch)) { 1059 dev_err(dev, "switch register failed\n"); 1060 return PTR_ERR(ctx->typec.typec_switch); 1061 } 1062 1063 return 0; 1064} 1065 1066static int anx7411_register_mux(struct anx7411_data *ctx, 1067 struct device *dev, 1068 struct fwnode_handle *fwnode) 1069{ 1070 struct typec_mux_desc mux_desc = { }; 1071 1072 mux_desc.fwnode = fwnode; 1073 mux_desc.drvdata = ctx; 1074 mux_desc.name = fwnode_get_name(fwnode); 1075 mux_desc.set = anx7411_usb_mux_set; 1076 1077 ctx->typec.typec_mux = typec_mux_register(dev, &mux_desc); 1078 if (IS_ERR(ctx->typec.typec_mux)) { 1079 dev_err(dev, "mux register failed\n"); 1080 return PTR_ERR(ctx->typec.typec_mux); 1081 } 1082 1083 return 0; 1084} 1085 1086static void anx7411_unregister_mux(struct anx7411_data *ctx) 1087{ 1088 if (ctx->typec.typec_mux) { 1089 typec_mux_unregister(ctx->typec.typec_mux); 1090 ctx->typec.typec_mux = NULL; 1091 } 1092} 1093 1094static void anx7411_unregister_switch(struct anx7411_data *ctx) 1095{ 1096 if (ctx->typec.typec_switch) { 1097 typec_switch_unregister(ctx->typec.typec_switch); 1098 ctx->typec.typec_switch = NULL; 1099 } 1100} 1101 1102static int anx7411_typec_switch_probe(struct anx7411_data *ctx, 1103 struct device *dev) 1104{ 1105 int ret; 1106 struct device_node *node; 1107 1108 node = of_get_child_by_name(dev->of_node, "orientation_switch"); 1109 if (!node) 1110 return 0; 1111 1112 ret = anx7411_register_switch(ctx, dev, &node->fwnode); 1113 if (ret) { 1114 dev_err(dev, "failed register switch"); 1115 return ret; 1116 } 1117 1118 node = of_get_child_by_name(dev->of_node, "mode_switch"); 1119 if (!node) { 1120 dev_err(dev, "no typec mux exist"); 1121 ret = -ENODEV; 1122 goto unregister_switch; 1123 } 1124 1125 ret = anx7411_register_mux(ctx, dev, &node->fwnode); 1126 if (ret) { 1127 dev_err(dev, "failed register mode switch"); 1128 ret = -ENODEV; 1129 goto unregister_switch; 1130 } 1131 1132 return 0; 1133 1134unregister_switch: 1135 anx7411_unregister_switch(ctx); 1136 1137 return ret; 1138} 1139 1140static int anx7411_typec_port_probe(struct anx7411_data *ctx, 1141 struct device *dev) 1142{ 1143 struct typec_capability *cap = &ctx->typec.caps; 1144 struct typec_params *typecp = &ctx->typec; 1145 struct fwnode_handle *fwnode; 1146 const char *buf; 1147 int ret, i; 1148 1149 fwnode = device_get_named_child_node(dev, "connector"); 1150 if (!fwnode) 1151 return -EINVAL; 1152 1153 ret = fwnode_property_read_string(fwnode, "power-role", &buf); 1154 if (ret) { 1155 dev_err(dev, "power-role not found: %d\n", ret); 1156 return ret; 1157 } 1158 1159 ret = typec_find_port_power_role(buf); 1160 if (ret < 0) 1161 return ret; 1162 cap->type = ret; 1163 1164 ret = fwnode_property_read_string(fwnode, "data-role", &buf); 1165 if (ret) { 1166 dev_err(dev, "data-role not found: %d\n", ret); 1167 return ret; 1168 } 1169 1170 ret = typec_find_port_data_role(buf); 1171 if (ret < 0) 1172 return ret; 1173 cap->data = ret; 1174 1175 ret = fwnode_property_read_string(fwnode, "try-power-role", &buf); 1176 if (ret) { 1177 dev_err(dev, "try-power-role not found: %d\n", ret); 1178 return ret; 1179 } 1180 1181 ret = typec_find_power_role(buf); 1182 if (ret < 0) 1183 return ret; 1184 cap->prefer_role = ret; 1185 1186 /* Get source pdos */ 1187 ret = fwnode_property_count_u32(fwnode, "source-pdos"); 1188 if (ret > 0) { 1189 typecp->src_pdo_nr = min_t(u8, ret, PDO_MAX_OBJECTS); 1190 ret = fwnode_property_read_u32_array(fwnode, "source-pdos", 1191 typecp->src_pdo, 1192 typecp->src_pdo_nr); 1193 if (ret < 0) { 1194 dev_err(dev, "source cap validate failed: %d\n", ret); 1195 return -EINVAL; 1196 } 1197 1198 typecp->caps_flags |= HAS_SOURCE_CAP; 1199 } 1200 1201 ret = fwnode_property_count_u32(fwnode, "sink-pdos"); 1202 if (ret > 0) { 1203 typecp->sink_pdo_nr = min_t(u8, ret, PDO_MAX_OBJECTS); 1204 ret = fwnode_property_read_u32_array(fwnode, "sink-pdos", 1205 typecp->sink_pdo, 1206 typecp->sink_pdo_nr); 1207 if (ret < 0) { 1208 dev_err(dev, "sink cap validate failed: %d\n", ret); 1209 return -EINVAL; 1210 } 1211 1212 for (i = 0; i < typecp->sink_pdo_nr; i++) { 1213 ret = 0; 1214 switch (pdo_type(typecp->sink_pdo[i])) { 1215 case PDO_TYPE_FIXED: 1216 ret = pdo_fixed_voltage(typecp->sink_pdo[i]); 1217 break; 1218 case PDO_TYPE_BATT: 1219 case PDO_TYPE_VAR: 1220 ret = pdo_max_voltage(typecp->sink_pdo[i]); 1221 break; 1222 case PDO_TYPE_APDO: 1223 default: 1224 ret = 0; 1225 break; 1226 } 1227 1228 /* 100mv per unit */ 1229 typecp->sink_voltage = max(5000, ret) / 100; 1230 } 1231 1232 typecp->caps_flags |= HAS_SINK_CAP; 1233 } 1234 1235 if (!fwnode_property_read_u32(fwnode, "op-sink-microwatt", &ret)) { 1236 typecp->sink_watt = ret / 500000; /* 500mw per unit */ 1237 typecp->caps_flags |= HAS_SINK_WATT; 1238 } 1239 1240 cap->fwnode = fwnode; 1241 1242 ctx->typec.role_sw = usb_role_switch_get(dev); 1243 if (IS_ERR(ctx->typec.role_sw)) { 1244 dev_err(dev, "USB role switch not found.\n"); 1245 ctx->typec.role_sw = NULL; 1246 } 1247 1248 ctx->typec.port = typec_register_port(dev, cap); 1249 if (IS_ERR(ctx->typec.port)) { 1250 ret = PTR_ERR(ctx->typec.port); 1251 ctx->typec.port = NULL; 1252 dev_err(dev, "Failed to register type c port %d\n", ret); 1253 return ret; 1254 } 1255 1256 typec_port_register_altmodes(ctx->typec.port, NULL, ctx, 1257 ctx->typec.port_amode, 1258 MAX_ALTMODE); 1259 return 0; 1260} 1261 1262static int anx7411_typec_check_connection(struct anx7411_data *ctx) 1263{ 1264 int ret; 1265 1266 ret = anx7411_reg_read(ctx->spi_client, FW_VER); 1267 if (ret < 0) 1268 return 0; /* No device attached in typec port */ 1269 1270 /* Clear interrupt and alert status */ 1271 ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0); 1272 ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_0, 0xFF); 1273 ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_1, 0xFF); 1274 if (ret) 1275 return ret; 1276 1277 ret = anx7411_cc_status_detect(ctx); 1278 ret |= anx7411_power_role_detect(ctx); 1279 ret |= anx7411_data_role_detect(ctx); 1280 ret |= anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C); 1281 if (ret) 1282 return ret; 1283 1284 ret = anx7411_send_msg(ctx, TYPE_GET_DP_ALT_ENTER, NULL, 0); 1285 ret |= anx7411_send_msg(ctx, TYPE_GET_DP_DISCOVER_MODES_INFO, NULL, 0); 1286 1287 return ret; 1288} 1289 1290static int __maybe_unused anx7411_runtime_pm_suspend(struct device *dev) 1291{ 1292 struct anx7411_data *ctx = dev_get_drvdata(dev); 1293 1294 mutex_lock(&ctx->lock); 1295 1296 anx7411_partner_unregister_altmode(ctx); 1297 1298 if (ctx->typec.partner) 1299 anx7411_unregister_partner(ctx); 1300 1301 mutex_unlock(&ctx->lock); 1302 1303 return 0; 1304} 1305 1306static int __maybe_unused anx7411_runtime_pm_resume(struct device *dev) 1307{ 1308 struct anx7411_data *ctx = dev_get_drvdata(dev); 1309 1310 mutex_lock(&ctx->lock); 1311 /* Detect PD connection */ 1312 if (anx7411_typec_check_connection(ctx)) 1313 dev_err(dev, "check connection"); 1314 1315 mutex_unlock(&ctx->lock); 1316 1317 return 0; 1318} 1319 1320static const struct dev_pm_ops anx7411_pm_ops = { 1321 SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, 1322 pm_runtime_force_resume) 1323 SET_RUNTIME_PM_OPS(anx7411_runtime_pm_suspend, 1324 anx7411_runtime_pm_resume, NULL) 1325}; 1326 1327static void anx7411_get_gpio_irq(struct anx7411_data *ctx) 1328{ 1329 struct device *dev = &ctx->tcpc_client->dev; 1330 1331 ctx->intp_gpiod = devm_gpiod_get_optional(dev, "interrupt", GPIOD_IN); 1332 if (IS_ERR_OR_NULL(ctx->intp_gpiod)) { 1333 dev_err(dev, "no interrupt gpio property\n"); 1334 return; 1335 } 1336 1337 ctx->intp_irq = gpiod_to_irq(ctx->intp_gpiod); 1338 if (ctx->intp_irq < 0) 1339 dev_err(dev, "failed to get GPIO IRQ\n"); 1340} 1341 1342static enum power_supply_usb_type anx7411_psy_usb_types[] = { 1343 POWER_SUPPLY_USB_TYPE_C, 1344 POWER_SUPPLY_USB_TYPE_PD, 1345 POWER_SUPPLY_USB_TYPE_PD_PPS, 1346}; 1347 1348static enum power_supply_property anx7411_psy_props[] = { 1349 POWER_SUPPLY_PROP_USB_TYPE, 1350 POWER_SUPPLY_PROP_ONLINE, 1351 POWER_SUPPLY_PROP_VOLTAGE_MIN, 1352 POWER_SUPPLY_PROP_VOLTAGE_MAX, 1353 POWER_SUPPLY_PROP_VOLTAGE_NOW, 1354 POWER_SUPPLY_PROP_CURRENT_MAX, 1355 POWER_SUPPLY_PROP_CURRENT_NOW, 1356}; 1357 1358static int anx7411_psy_set_prop(struct power_supply *psy, 1359 enum power_supply_property psp, 1360 const union power_supply_propval *val) 1361{ 1362 struct anx7411_data *ctx = power_supply_get_drvdata(psy); 1363 int ret = 0; 1364 1365 if (psp == POWER_SUPPLY_PROP_ONLINE) 1366 ctx->psy_online = val->intval; 1367 else 1368 ret = -EINVAL; 1369 1370 power_supply_changed(ctx->psy); 1371 return ret; 1372} 1373 1374static int anx7411_psy_prop_writeable(struct power_supply *psy, 1375 enum power_supply_property psp) 1376{ 1377 return psp == POWER_SUPPLY_PROP_ONLINE; 1378} 1379 1380static int anx7411_psy_get_prop(struct power_supply *psy, 1381 enum power_supply_property psp, 1382 union power_supply_propval *val) 1383{ 1384 struct anx7411_data *ctx = power_supply_get_drvdata(psy); 1385 int ret = 0; 1386 1387 switch (psp) { 1388 case POWER_SUPPLY_PROP_USB_TYPE: 1389 val->intval = ctx->usb_type; 1390 break; 1391 case POWER_SUPPLY_PROP_ONLINE: 1392 val->intval = ctx->psy_online; 1393 break; 1394 case POWER_SUPPLY_PROP_VOLTAGE_NOW: 1395 case POWER_SUPPLY_PROP_VOLTAGE_MIN: 1396 case POWER_SUPPLY_PROP_VOLTAGE_MAX: 1397 val->intval = (ctx->psy_online) ? 1398 ctx->typec.request_voltage * 1000 : 0; 1399 break; 1400 case POWER_SUPPLY_PROP_CURRENT_NOW: 1401 case POWER_SUPPLY_PROP_CURRENT_MAX: 1402 val->intval = (ctx->psy_online) ? 1403 ctx->typec.request_current * 1000 : 0; 1404 break; 1405 default: 1406 ret = -EINVAL; 1407 break; 1408 } 1409 return ret; 1410} 1411 1412static int anx7411_psy_register(struct anx7411_data *ctx) 1413{ 1414 struct power_supply_desc *psy_desc = &ctx->psy_desc; 1415 struct power_supply_config psy_cfg = {}; 1416 char *psy_name; 1417 1418 psy_name = devm_kasprintf(ctx->dev, GFP_KERNEL, "anx7411-source-psy-%s", 1419 dev_name(ctx->dev)); 1420 if (!psy_name) 1421 return -ENOMEM; 1422 1423 psy_desc->name = psy_name; 1424 psy_desc->type = POWER_SUPPLY_TYPE_USB; 1425 psy_desc->usb_types = anx7411_psy_usb_types; 1426 psy_desc->num_usb_types = ARRAY_SIZE(anx7411_psy_usb_types); 1427 psy_desc->properties = anx7411_psy_props; 1428 psy_desc->num_properties = ARRAY_SIZE(anx7411_psy_props); 1429 1430 psy_desc->get_property = anx7411_psy_get_prop; 1431 psy_desc->set_property = anx7411_psy_set_prop; 1432 psy_desc->property_is_writeable = anx7411_psy_prop_writeable; 1433 1434 ctx->usb_type = POWER_SUPPLY_USB_TYPE_C; 1435 ctx->psy = devm_power_supply_register(ctx->dev, psy_desc, &psy_cfg); 1436 1437 if (IS_ERR(ctx->psy)) 1438 dev_warn(ctx->dev, "unable to register psy\n"); 1439 1440 return PTR_ERR_OR_ZERO(ctx->psy); 1441} 1442 1443static int anx7411_i2c_probe(struct i2c_client *client) 1444{ 1445 struct anx7411_data *plat; 1446 struct device *dev = &client->dev; 1447 int ret; 1448 1449 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) 1450 return -ENODEV; 1451 1452 plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL); 1453 if (!plat) 1454 return -ENOMEM; 1455 1456 plat->tcpc_client = client; 1457 i2c_set_clientdata(client, plat); 1458 1459 mutex_init(&plat->lock); 1460 1461 ret = anx7411_register_i2c_dummy_clients(plat, client); 1462 if (ret) { 1463 dev_err(dev, "fail to reserve I2C bus\n"); 1464 return ret; 1465 } 1466 1467 ret = anx7411_typec_switch_probe(plat, dev); 1468 if (ret) { 1469 dev_err(dev, "fail to probe typec switch\n"); 1470 goto free_i2c_dummy; 1471 } 1472 1473 ret = anx7411_typec_port_probe(plat, dev); 1474 if (ret) { 1475 dev_err(dev, "fail to probe typec property.\n"); 1476 ret = -ENODEV; 1477 goto free_typec_switch; 1478 } 1479 1480 plat->intp_irq = client->irq; 1481 if (!client->irq) 1482 anx7411_get_gpio_irq(plat); 1483 1484 if (!plat->intp_irq) { 1485 dev_err(dev, "fail to get interrupt IRQ\n"); 1486 ret = -EINVAL; 1487 goto free_typec_port; 1488 } 1489 1490 plat->dev = dev; 1491 plat->psy_online = ANX7411_PSY_OFFLINE; 1492 ret = anx7411_psy_register(plat); 1493 if (ret) { 1494 dev_err(dev, "register psy\n"); 1495 goto free_typec_port; 1496 } 1497 1498 INIT_WORK(&plat->work, anx7411_work_func); 1499 plat->workqueue = alloc_workqueue("anx7411_work", 1500 WQ_FREEZABLE | 1501 WQ_MEM_RECLAIM, 1502 1); 1503 if (!plat->workqueue) { 1504 dev_err(dev, "fail to create work queue\n"); 1505 ret = -ENOMEM; 1506 goto free_typec_port; 1507 } 1508 1509 ret = devm_request_threaded_irq(dev, plat->intp_irq, 1510 NULL, anx7411_intr_isr, 1511 IRQF_TRIGGER_FALLING | 1512 IRQF_ONESHOT, 1513 "anx7411-intp", plat); 1514 if (ret) { 1515 dev_err(dev, "fail to request irq\n"); 1516 goto free_wq; 1517 } 1518 1519 if (anx7411_typec_check_connection(plat)) 1520 dev_err(dev, "check status\n"); 1521 1522 pm_runtime_enable(dev); 1523 1524 return 0; 1525 1526free_wq: 1527 destroy_workqueue(plat->workqueue); 1528 1529free_typec_port: 1530 typec_unregister_port(plat->typec.port); 1531 anx7411_port_unregister_altmodes(plat->typec.port_amode); 1532 1533free_typec_switch: 1534 anx7411_unregister_switch(plat); 1535 anx7411_unregister_mux(plat); 1536 1537free_i2c_dummy: 1538 i2c_unregister_device(plat->spi_client); 1539 1540 return ret; 1541} 1542 1543static void anx7411_i2c_remove(struct i2c_client *client) 1544{ 1545 struct anx7411_data *plat = i2c_get_clientdata(client); 1546 1547 anx7411_partner_unregister_altmode(plat); 1548 anx7411_unregister_partner(plat); 1549 1550 if (plat->workqueue) 1551 destroy_workqueue(plat->workqueue); 1552 1553 i2c_unregister_device(plat->spi_client); 1554 1555 if (plat->typec.role_sw) 1556 usb_role_switch_put(plat->typec.role_sw); 1557 1558 anx7411_unregister_mux(plat); 1559 1560 anx7411_unregister_switch(plat); 1561 1562 if (plat->typec.port) 1563 typec_unregister_port(plat->typec.port); 1564 1565 anx7411_port_unregister_altmodes(plat->typec.port_amode); 1566} 1567 1568static const struct i2c_device_id anx7411_id[] = { 1569 {"anx7411", 0}, 1570 {} 1571}; 1572 1573MODULE_DEVICE_TABLE(i2c, anx7411_id); 1574 1575static const struct of_device_id anx_match_table[] = { 1576 {.compatible = "analogix,anx7411",}, 1577 {}, 1578}; 1579 1580static struct i2c_driver anx7411_driver = { 1581 .driver = { 1582 .name = "anx7411", 1583 .of_match_table = anx_match_table, 1584 .pm = &anx7411_pm_ops, 1585 }, 1586 .probe = anx7411_i2c_probe, 1587 .remove = anx7411_i2c_remove, 1588 1589 .id_table = anx7411_id, 1590}; 1591 1592module_i2c_driver(anx7411_driver); 1593 1594MODULE_DESCRIPTION("Anx7411 USB Type-C PD driver"); 1595MODULE_AUTHOR("Xin Ji <xji@analogixsemi.com>"); 1596MODULE_LICENSE("GPL"); 1597MODULE_VERSION("0.1.5"); 1598