1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Intel La Jolla Cove Adapter USB driver 4 * 5 * Copyright (c) 2023, Intel Corporation. 6 */ 7 8#include <linux/acpi.h> 9#include <linux/auxiliary_bus.h> 10#include <linux/dev_printk.h> 11#include <linux/kernel.h> 12#include <linux/mod_devicetable.h> 13#include <linux/module.h> 14#include <linux/mutex.h> 15#include <linux/slab.h> 16#include <linux/spinlock.h> 17#include <linux/types.h> 18#include <linux/usb.h> 19#include <linux/usb/ljca.h> 20 21#include <asm/unaligned.h> 22 23/* command flags */ 24#define LJCA_ACK_FLAG BIT(0) 25#define LJCA_RESP_FLAG BIT(1) 26#define LJCA_CMPL_FLAG BIT(2) 27 28#define LJCA_MAX_PACKET_SIZE 64u 29#define LJCA_MAX_PAYLOAD_SIZE \ 30 (LJCA_MAX_PACKET_SIZE - sizeof(struct ljca_msg)) 31 32#define LJCA_WRITE_TIMEOUT_MS 200 33#define LJCA_WRITE_ACK_TIMEOUT_MS 500 34#define LJCA_ENUM_CLIENT_TIMEOUT_MS 20 35 36/* ljca client type */ 37enum ljca_client_type { 38 LJCA_CLIENT_MNG = 1, 39 LJCA_CLIENT_GPIO = 3, 40 LJCA_CLIENT_I2C = 4, 41 LJCA_CLIENT_SPI = 5, 42}; 43 44/* MNG client commands */ 45enum ljca_mng_cmd { 46 LJCA_MNG_RESET = 2, 47 LJCA_MNG_ENUM_GPIO = 4, 48 LJCA_MNG_ENUM_I2C = 5, 49 LJCA_MNG_ENUM_SPI = 8, 50}; 51 52/* ljca client acpi _ADR */ 53enum ljca_client_acpi_adr { 54 LJCA_GPIO_ACPI_ADR, 55 LJCA_I2C1_ACPI_ADR, 56 LJCA_I2C2_ACPI_ADR, 57 LJCA_SPI1_ACPI_ADR, 58 LJCA_SPI2_ACPI_ADR, 59 LJCA_CLIENT_ACPI_ADR_MAX, 60}; 61 62/* ljca cmd message structure */ 63struct ljca_msg { 64 u8 type; 65 u8 cmd; 66 u8 flags; 67 u8 len; 68 u8 data[] __counted_by(len); 69} __packed; 70 71struct ljca_i2c_ctr_info { 72 u8 id; 73 u8 capacity; 74 u8 intr_pin; 75} __packed; 76 77struct ljca_i2c_descriptor { 78 u8 num; 79 struct ljca_i2c_ctr_info info[] __counted_by(num); 80} __packed; 81 82struct ljca_spi_ctr_info { 83 u8 id; 84 u8 capacity; 85 u8 intr_pin; 86} __packed; 87 88struct ljca_spi_descriptor { 89 u8 num; 90 struct ljca_spi_ctr_info info[] __counted_by(num); 91} __packed; 92 93struct ljca_bank_descriptor { 94 u8 bank_id; 95 u8 pin_num; 96 97 /* 1 bit for each gpio, 1 means valid */ 98 __le32 valid_pins; 99} __packed; 100 101struct ljca_gpio_descriptor { 102 u8 pins_per_bank; 103 u8 bank_num; 104 struct ljca_bank_descriptor bank_desc[] __counted_by(bank_num); 105} __packed; 106 107/** 108 * struct ljca_adapter - represent a ljca adapter 109 * 110 * @intf: the usb interface for this ljca adapter 111 * @usb_dev: the usb device for this ljca adapter 112 * @dev: the specific device info of the usb interface 113 * @rx_pipe: bulk in pipe for receive data from firmware 114 * @tx_pipe: bulk out pipe for send data to firmware 115 * @rx_urb: urb used for the bulk in pipe 116 * @rx_buf: buffer used to receive command response and event 117 * @rx_len: length of rx buffer 118 * @ex_buf: external buffer to save command response 119 * @ex_buf_len: length of external buffer 120 * @actual_length: actual length of data copied to external buffer 121 * @tx_buf: buffer used to download command to firmware 122 * @tx_buf_len: length of tx buffer 123 * @lock: spinlock to protect tx_buf and ex_buf 124 * @cmd_completion: completion object as the command receives ack 125 * @mutex: mutex to avoid command download concurrently 126 * @client_list: client device list 127 * @disconnect: usb disconnect ongoing or not 128 * @reset_id: used to reset firmware 129 */ 130struct ljca_adapter { 131 struct usb_interface *intf; 132 struct usb_device *usb_dev; 133 struct device *dev; 134 135 unsigned int rx_pipe; 136 unsigned int tx_pipe; 137 138 struct urb *rx_urb; 139 void *rx_buf; 140 unsigned int rx_len; 141 142 u8 *ex_buf; 143 u8 ex_buf_len; 144 u8 actual_length; 145 146 void *tx_buf; 147 u8 tx_buf_len; 148 149 spinlock_t lock; 150 151 struct completion cmd_completion; 152 struct mutex mutex; 153 154 struct list_head client_list; 155 156 bool disconnect; 157 158 u32 reset_id; 159}; 160 161struct ljca_match_ids_walk_data { 162 const struct acpi_device_id *ids; 163 const char *uid; 164 struct acpi_device *adev; 165}; 166 167static const struct acpi_device_id ljca_gpio_hids[] = { 168 { "INTC1074" }, 169 { "INTC1096" }, 170 { "INTC100B" }, 171 { "INTC10D1" }, 172 {}, 173}; 174 175static const struct acpi_device_id ljca_i2c_hids[] = { 176 { "INTC1075" }, 177 { "INTC1097" }, 178 { "INTC100C" }, 179 { "INTC10D2" }, 180 {}, 181}; 182 183static const struct acpi_device_id ljca_spi_hids[] = { 184 { "INTC1091" }, 185 { "INTC1098" }, 186 { "INTC100D" }, 187 { "INTC10D3" }, 188 {}, 189}; 190 191static void ljca_handle_event(struct ljca_adapter *adap, 192 struct ljca_msg *header) 193{ 194 struct ljca_client *client; 195 196 list_for_each_entry(client, &adap->client_list, link) { 197 /* 198 * Currently only GPIO register event callback, but 199 * firmware message structure should include id when 200 * multiple same type clients register event callback. 201 */ 202 if (client->type == header->type) { 203 unsigned long flags; 204 205 spin_lock_irqsave(&client->event_cb_lock, flags); 206 client->event_cb(client->context, header->cmd, 207 header->data, header->len); 208 spin_unlock_irqrestore(&client->event_cb_lock, flags); 209 210 break; 211 } 212 } 213} 214 215/* process command ack and received data if available */ 216static void ljca_handle_cmd_ack(struct ljca_adapter *adap, struct ljca_msg *header) 217{ 218 struct ljca_msg *tx_header = adap->tx_buf; 219 u8 ibuf_len, actual_len = 0; 220 unsigned long flags; 221 u8 *ibuf; 222 223 spin_lock_irqsave(&adap->lock, flags); 224 225 if (tx_header->type != header->type || tx_header->cmd != header->cmd) { 226 spin_unlock_irqrestore(&adap->lock, flags); 227 dev_err(adap->dev, "cmd ack mismatch error\n"); 228 return; 229 } 230 231 ibuf_len = adap->ex_buf_len; 232 ibuf = adap->ex_buf; 233 234 if (ibuf && ibuf_len) { 235 actual_len = min(header->len, ibuf_len); 236 237 /* copy received data to external buffer */ 238 memcpy(ibuf, header->data, actual_len); 239 } 240 /* update copied data length */ 241 adap->actual_length = actual_len; 242 243 spin_unlock_irqrestore(&adap->lock, flags); 244 245 complete(&adap->cmd_completion); 246} 247 248static void ljca_recv(struct urb *urb) 249{ 250 struct ljca_msg *header = urb->transfer_buffer; 251 struct ljca_adapter *adap = urb->context; 252 int ret; 253 254 switch (urb->status) { 255 case 0: 256 /* success */ 257 break; 258 case -ENOENT: 259 /* 260 * directly complete the possible ongoing transfer 261 * during disconnect 262 */ 263 if (adap->disconnect) 264 complete(&adap->cmd_completion); 265 return; 266 case -ECONNRESET: 267 case -ESHUTDOWN: 268 case -EPIPE: 269 /* rx urb is terminated */ 270 dev_dbg(adap->dev, "rx urb terminated with status: %d\n", 271 urb->status); 272 return; 273 default: 274 dev_dbg(adap->dev, "rx urb error: %d\n", urb->status); 275 goto resubmit; 276 } 277 278 if (header->len + sizeof(*header) != urb->actual_length) 279 goto resubmit; 280 281 if (header->flags & LJCA_ACK_FLAG) 282 ljca_handle_cmd_ack(adap, header); 283 else 284 ljca_handle_event(adap, header); 285 286resubmit: 287 ret = usb_submit_urb(urb, GFP_ATOMIC); 288 if (ret && ret != -EPERM) 289 dev_err(adap->dev, "resubmit rx urb error %d\n", ret); 290} 291 292static int ljca_send(struct ljca_adapter *adap, u8 type, u8 cmd, 293 const u8 *obuf, u8 obuf_len, u8 *ibuf, u8 ibuf_len, 294 bool ack, unsigned long timeout) 295{ 296 unsigned int msg_len = sizeof(struct ljca_msg) + obuf_len; 297 struct ljca_msg *header = adap->tx_buf; 298 unsigned int transferred; 299 unsigned long flags; 300 int ret; 301 302 if (adap->disconnect) 303 return -ENODEV; 304 305 if (msg_len > adap->tx_buf_len) 306 return -EINVAL; 307 308 mutex_lock(&adap->mutex); 309 310 spin_lock_irqsave(&adap->lock, flags); 311 312 header->type = type; 313 header->cmd = cmd; 314 header->len = obuf_len; 315 if (obuf) 316 memcpy(header->data, obuf, obuf_len); 317 318 header->flags = LJCA_CMPL_FLAG | (ack ? LJCA_ACK_FLAG : 0); 319 320 adap->ex_buf = ibuf; 321 adap->ex_buf_len = ibuf_len; 322 adap->actual_length = 0; 323 324 spin_unlock_irqrestore(&adap->lock, flags); 325 326 reinit_completion(&adap->cmd_completion); 327 328 ret = usb_autopm_get_interface(adap->intf); 329 if (ret < 0) 330 goto out; 331 332 ret = usb_bulk_msg(adap->usb_dev, adap->tx_pipe, header, 333 msg_len, &transferred, LJCA_WRITE_TIMEOUT_MS); 334 335 usb_autopm_put_interface(adap->intf); 336 337 if (ret < 0) 338 goto out; 339 if (transferred != msg_len) { 340 ret = -EIO; 341 goto out; 342 } 343 344 if (ack) { 345 ret = wait_for_completion_timeout(&adap->cmd_completion, 346 timeout); 347 if (!ret) { 348 ret = -ETIMEDOUT; 349 goto out; 350 } 351 } 352 ret = adap->actual_length; 353 354out: 355 spin_lock_irqsave(&adap->lock, flags); 356 adap->ex_buf = NULL; 357 adap->ex_buf_len = 0; 358 359 memset(header, 0, sizeof(*header)); 360 spin_unlock_irqrestore(&adap->lock, flags); 361 362 mutex_unlock(&adap->mutex); 363 364 return ret; 365} 366 367int ljca_transfer(struct ljca_client *client, u8 cmd, const u8 *obuf, 368 u8 obuf_len, u8 *ibuf, u8 ibuf_len) 369{ 370 return ljca_send(client->adapter, client->type, cmd, 371 obuf, obuf_len, ibuf, ibuf_len, true, 372 LJCA_WRITE_ACK_TIMEOUT_MS); 373} 374EXPORT_SYMBOL_NS_GPL(ljca_transfer, LJCA); 375 376int ljca_transfer_noack(struct ljca_client *client, u8 cmd, const u8 *obuf, 377 u8 obuf_len) 378{ 379 return ljca_send(client->adapter, client->type, cmd, obuf, 380 obuf_len, NULL, 0, false, LJCA_WRITE_ACK_TIMEOUT_MS); 381} 382EXPORT_SYMBOL_NS_GPL(ljca_transfer_noack, LJCA); 383 384int ljca_register_event_cb(struct ljca_client *client, ljca_event_cb_t event_cb, 385 void *context) 386{ 387 unsigned long flags; 388 389 if (!event_cb) 390 return -EINVAL; 391 392 spin_lock_irqsave(&client->event_cb_lock, flags); 393 394 if (client->event_cb) { 395 spin_unlock_irqrestore(&client->event_cb_lock, flags); 396 return -EALREADY; 397 } 398 399 client->event_cb = event_cb; 400 client->context = context; 401 402 spin_unlock_irqrestore(&client->event_cb_lock, flags); 403 404 return 0; 405} 406EXPORT_SYMBOL_NS_GPL(ljca_register_event_cb, LJCA); 407 408void ljca_unregister_event_cb(struct ljca_client *client) 409{ 410 unsigned long flags; 411 412 spin_lock_irqsave(&client->event_cb_lock, flags); 413 414 client->event_cb = NULL; 415 client->context = NULL; 416 417 spin_unlock_irqrestore(&client->event_cb_lock, flags); 418} 419EXPORT_SYMBOL_NS_GPL(ljca_unregister_event_cb, LJCA); 420 421static int ljca_match_device_ids(struct acpi_device *adev, void *data) 422{ 423 struct ljca_match_ids_walk_data *wd = data; 424 const char *uid = acpi_device_uid(adev); 425 426 if (acpi_match_device_ids(adev, wd->ids)) 427 return 0; 428 429 if (!wd->uid) 430 goto match; 431 432 if (!uid) 433 /* 434 * Some DSDTs have only one ACPI companion for the two I2C 435 * controllers and they don't set a UID at all (e.g. Dell 436 * Latitude 9420). On these platforms only the first I2C 437 * controller is used, so if a HID match has no UID we use 438 * "0" as the UID and assign ACPI companion to the first 439 * I2C controller. 440 */ 441 uid = "0"; 442 else 443 uid = strchr(uid, wd->uid[0]); 444 445 if (!uid || strcmp(uid, wd->uid)) 446 return 0; 447 448match: 449 wd->adev = adev; 450 451 return 1; 452} 453 454/* bind auxiliary device to acpi device */ 455static void ljca_auxdev_acpi_bind(struct ljca_adapter *adap, 456 struct auxiliary_device *auxdev, 457 u64 adr, u8 id) 458{ 459 struct ljca_match_ids_walk_data wd = { 0 }; 460 struct device *dev = adap->dev; 461 struct acpi_device *parent; 462 char uid[4]; 463 464 parent = ACPI_COMPANION(dev); 465 if (!parent) 466 return; 467 468 /* 469 * Currently LJCA hw doesn't use _ADR instead the shipped 470 * platforms use _HID to distinguish children devices. 471 */ 472 switch (adr) { 473 case LJCA_GPIO_ACPI_ADR: 474 wd.ids = ljca_gpio_hids; 475 break; 476 case LJCA_I2C1_ACPI_ADR: 477 case LJCA_I2C2_ACPI_ADR: 478 snprintf(uid, sizeof(uid), "%d", id); 479 wd.uid = uid; 480 wd.ids = ljca_i2c_hids; 481 break; 482 case LJCA_SPI1_ACPI_ADR: 483 case LJCA_SPI2_ACPI_ADR: 484 wd.ids = ljca_spi_hids; 485 break; 486 default: 487 dev_warn(dev, "unsupported _ADR\n"); 488 return; 489 } 490 491 acpi_dev_for_each_child(parent, ljca_match_device_ids, &wd); 492 if (wd.adev) { 493 ACPI_COMPANION_SET(&auxdev->dev, wd.adev); 494 return; 495 } 496 497 parent = ACPI_COMPANION(dev->parent->parent); 498 if (!parent) 499 return; 500 501 acpi_dev_for_each_child(parent, ljca_match_device_ids, &wd); 502 if (wd.adev) 503 ACPI_COMPANION_SET(&auxdev->dev, wd.adev); 504} 505 506static void ljca_auxdev_release(struct device *dev) 507{ 508 struct auxiliary_device *auxdev = to_auxiliary_dev(dev); 509 510 kfree(auxdev->dev.platform_data); 511} 512 513static int ljca_new_client_device(struct ljca_adapter *adap, u8 type, u8 id, 514 char *name, void *data, u64 adr) 515{ 516 struct auxiliary_device *auxdev; 517 struct ljca_client *client; 518 int ret; 519 520 client = kzalloc(sizeof *client, GFP_KERNEL); 521 if (!client) { 522 kfree(data); 523 return -ENOMEM; 524 } 525 526 client->type = type; 527 client->id = id; 528 client->adapter = adap; 529 spin_lock_init(&client->event_cb_lock); 530 531 auxdev = &client->auxdev; 532 auxdev->name = name; 533 auxdev->id = id; 534 535 auxdev->dev.parent = adap->dev; 536 auxdev->dev.platform_data = data; 537 auxdev->dev.release = ljca_auxdev_release; 538 539 ret = auxiliary_device_init(auxdev); 540 if (ret) { 541 kfree(data); 542 goto err_free; 543 } 544 545 ljca_auxdev_acpi_bind(adap, auxdev, adr, id); 546 547 ret = auxiliary_device_add(auxdev); 548 if (ret) 549 goto err_uninit; 550 551 list_add_tail(&client->link, &adap->client_list); 552 553 return 0; 554 555err_uninit: 556 auxiliary_device_uninit(auxdev); 557 558err_free: 559 kfree(client); 560 561 return ret; 562} 563 564static int ljca_enumerate_gpio(struct ljca_adapter *adap) 565{ 566 u32 valid_pin[LJCA_MAX_GPIO_NUM / BITS_PER_TYPE(u32)]; 567 struct ljca_gpio_descriptor *desc; 568 struct ljca_gpio_info *gpio_info; 569 u8 buf[LJCA_MAX_PAYLOAD_SIZE]; 570 int ret, gpio_num; 571 unsigned int i; 572 573 ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_ENUM_GPIO, NULL, 0, buf, 574 sizeof(buf), true, LJCA_ENUM_CLIENT_TIMEOUT_MS); 575 if (ret < 0) 576 return ret; 577 578 /* check firmware response */ 579 desc = (struct ljca_gpio_descriptor *)buf; 580 if (ret != struct_size(desc, bank_desc, desc->bank_num)) 581 return -EINVAL; 582 583 gpio_num = desc->pins_per_bank * desc->bank_num; 584 if (gpio_num > LJCA_MAX_GPIO_NUM) 585 return -EINVAL; 586 587 /* construct platform data */ 588 gpio_info = kzalloc(sizeof *gpio_info, GFP_KERNEL); 589 if (!gpio_info) 590 return -ENOMEM; 591 gpio_info->num = gpio_num; 592 593 for (i = 0; i < desc->bank_num; i++) 594 valid_pin[i] = get_unaligned_le32(&desc->bank_desc[i].valid_pins); 595 bitmap_from_arr32(gpio_info->valid_pin_map, valid_pin, gpio_num); 596 597 return ljca_new_client_device(adap, LJCA_CLIENT_GPIO, 0, "ljca-gpio", 598 gpio_info, LJCA_GPIO_ACPI_ADR); 599} 600 601static int ljca_enumerate_i2c(struct ljca_adapter *adap) 602{ 603 struct ljca_i2c_descriptor *desc; 604 struct ljca_i2c_info *i2c_info; 605 u8 buf[LJCA_MAX_PAYLOAD_SIZE]; 606 unsigned int i; 607 int ret; 608 609 ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_ENUM_I2C, NULL, 0, buf, 610 sizeof(buf), true, LJCA_ENUM_CLIENT_TIMEOUT_MS); 611 if (ret < 0) 612 return ret; 613 614 /* check firmware response */ 615 desc = (struct ljca_i2c_descriptor *)buf; 616 if (ret != struct_size(desc, info, desc->num)) 617 return -EINVAL; 618 619 for (i = 0; i < desc->num; i++) { 620 /* construct platform data */ 621 i2c_info = kzalloc(sizeof *i2c_info, GFP_KERNEL); 622 if (!i2c_info) 623 return -ENOMEM; 624 625 i2c_info->id = desc->info[i].id; 626 i2c_info->capacity = desc->info[i].capacity; 627 i2c_info->intr_pin = desc->info[i].intr_pin; 628 629 ret = ljca_new_client_device(adap, LJCA_CLIENT_I2C, i, 630 "ljca-i2c", i2c_info, 631 LJCA_I2C1_ACPI_ADR + i); 632 if (ret) 633 return ret; 634 } 635 636 return 0; 637} 638 639static int ljca_enumerate_spi(struct ljca_adapter *adap) 640{ 641 struct ljca_spi_descriptor *desc; 642 struct ljca_spi_info *spi_info; 643 u8 buf[LJCA_MAX_PAYLOAD_SIZE]; 644 unsigned int i; 645 int ret; 646 647 /* Not all LJCA chips implement SPI, a timeout reading the descriptors is normal */ 648 ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_ENUM_SPI, NULL, 0, buf, 649 sizeof(buf), true, LJCA_ENUM_CLIENT_TIMEOUT_MS); 650 if (ret < 0) 651 return (ret == -ETIMEDOUT) ? 0 : ret; 652 653 /* check firmware response */ 654 desc = (struct ljca_spi_descriptor *)buf; 655 if (ret != struct_size(desc, info, desc->num)) 656 return -EINVAL; 657 658 for (i = 0; i < desc->num; i++) { 659 /* construct platform data */ 660 spi_info = kzalloc(sizeof *spi_info, GFP_KERNEL); 661 if (!spi_info) 662 return -ENOMEM; 663 664 spi_info->id = desc->info[i].id; 665 spi_info->capacity = desc->info[i].capacity; 666 667 ret = ljca_new_client_device(adap, LJCA_CLIENT_SPI, i, 668 "ljca-spi", spi_info, 669 LJCA_SPI1_ACPI_ADR + i); 670 if (ret) 671 return ret; 672 } 673 674 return 0; 675} 676 677static int ljca_reset_handshake(struct ljca_adapter *adap) 678{ 679 __le32 reset_id = cpu_to_le32(adap->reset_id); 680 __le32 reset_id_ret = 0; 681 int ret; 682 683 adap->reset_id++; 684 685 ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_RESET, (u8 *)&reset_id, 686 sizeof(__le32), (u8 *)&reset_id_ret, sizeof(__le32), 687 true, LJCA_WRITE_ACK_TIMEOUT_MS); 688 if (ret < 0) 689 return ret; 690 691 if (reset_id_ret != reset_id) 692 return -EINVAL; 693 694 return 0; 695} 696 697static int ljca_enumerate_clients(struct ljca_adapter *adap) 698{ 699 struct ljca_client *client, *next; 700 int ret; 701 702 ret = ljca_reset_handshake(adap); 703 if (ret) 704 goto err_kill; 705 706 ret = ljca_enumerate_gpio(adap); 707 if (ret) { 708 dev_err(adap->dev, "enumerate GPIO error\n"); 709 goto err_kill; 710 } 711 712 ret = ljca_enumerate_i2c(adap); 713 if (ret) { 714 dev_err(adap->dev, "enumerate I2C error\n"); 715 goto err_kill; 716 } 717 718 ret = ljca_enumerate_spi(adap); 719 if (ret) { 720 dev_err(adap->dev, "enumerate SPI error\n"); 721 goto err_kill; 722 } 723 724 return 0; 725 726err_kill: 727 adap->disconnect = true; 728 729 usb_kill_urb(adap->rx_urb); 730 731 list_for_each_entry_safe_reverse(client, next, &adap->client_list, link) { 732 auxiliary_device_delete(&client->auxdev); 733 auxiliary_device_uninit(&client->auxdev); 734 735 list_del_init(&client->link); 736 kfree(client); 737 } 738 739 return ret; 740} 741 742static int ljca_probe(struct usb_interface *interface, 743 const struct usb_device_id *id) 744{ 745 struct usb_device *usb_dev = interface_to_usbdev(interface); 746 struct usb_host_interface *alt = interface->cur_altsetting; 747 struct usb_endpoint_descriptor *ep_in, *ep_out; 748 struct device *dev = &interface->dev; 749 struct ljca_adapter *adap; 750 int ret; 751 752 adap = devm_kzalloc(dev, sizeof(*adap), GFP_KERNEL); 753 if (!adap) 754 return -ENOMEM; 755 756 /* separate tx buffer allocation for alignment */ 757 adap->tx_buf = devm_kzalloc(dev, LJCA_MAX_PACKET_SIZE, GFP_KERNEL); 758 if (!adap->tx_buf) 759 return -ENOMEM; 760 adap->tx_buf_len = LJCA_MAX_PACKET_SIZE; 761 762 mutex_init(&adap->mutex); 763 spin_lock_init(&adap->lock); 764 init_completion(&adap->cmd_completion); 765 INIT_LIST_HEAD(&adap->client_list); 766 767 adap->intf = usb_get_intf(interface); 768 adap->usb_dev = usb_dev; 769 adap->dev = dev; 770 771 /* 772 * find the first bulk in and out endpoints. 773 * ignore any others. 774 */ 775 ret = usb_find_common_endpoints(alt, &ep_in, &ep_out, NULL, NULL); 776 if (ret) { 777 dev_err(dev, "bulk endpoints not found\n"); 778 goto err_put; 779 } 780 adap->rx_pipe = usb_rcvbulkpipe(usb_dev, usb_endpoint_num(ep_in)); 781 adap->tx_pipe = usb_sndbulkpipe(usb_dev, usb_endpoint_num(ep_out)); 782 783 /* setup rx buffer */ 784 adap->rx_len = usb_endpoint_maxp(ep_in); 785 adap->rx_buf = devm_kzalloc(dev, adap->rx_len, GFP_KERNEL); 786 if (!adap->rx_buf) { 787 ret = -ENOMEM; 788 goto err_put; 789 } 790 791 /* alloc rx urb */ 792 adap->rx_urb = usb_alloc_urb(0, GFP_KERNEL); 793 if (!adap->rx_urb) { 794 ret = -ENOMEM; 795 goto err_put; 796 } 797 usb_fill_bulk_urb(adap->rx_urb, usb_dev, adap->rx_pipe, 798 adap->rx_buf, adap->rx_len, ljca_recv, adap); 799 800 usb_set_intfdata(interface, adap); 801 802 /* submit rx urb before enumerate clients */ 803 ret = usb_submit_urb(adap->rx_urb, GFP_KERNEL); 804 if (ret) { 805 dev_err(dev, "submit rx urb failed: %d\n", ret); 806 goto err_free; 807 } 808 809 ret = ljca_enumerate_clients(adap); 810 if (ret) 811 goto err_free; 812 813 usb_enable_autosuspend(usb_dev); 814 815 return 0; 816 817err_free: 818 usb_free_urb(adap->rx_urb); 819 820err_put: 821 usb_put_intf(adap->intf); 822 823 mutex_destroy(&adap->mutex); 824 825 return ret; 826} 827 828static void ljca_disconnect(struct usb_interface *interface) 829{ 830 struct ljca_adapter *adap = usb_get_intfdata(interface); 831 struct ljca_client *client, *next; 832 833 adap->disconnect = true; 834 835 usb_kill_urb(adap->rx_urb); 836 837 list_for_each_entry_safe_reverse(client, next, &adap->client_list, link) { 838 auxiliary_device_delete(&client->auxdev); 839 auxiliary_device_uninit(&client->auxdev); 840 841 list_del_init(&client->link); 842 kfree(client); 843 } 844 845 usb_free_urb(adap->rx_urb); 846 847 usb_put_intf(adap->intf); 848 849 mutex_destroy(&adap->mutex); 850} 851 852static int ljca_suspend(struct usb_interface *interface, pm_message_t message) 853{ 854 struct ljca_adapter *adap = usb_get_intfdata(interface); 855 856 usb_kill_urb(adap->rx_urb); 857 858 return 0; 859} 860 861static int ljca_resume(struct usb_interface *interface) 862{ 863 struct ljca_adapter *adap = usb_get_intfdata(interface); 864 865 return usb_submit_urb(adap->rx_urb, GFP_KERNEL); 866} 867 868static const struct usb_device_id ljca_table[] = { 869 { USB_DEVICE(0x8086, 0x0b63) }, 870 { /* sentinel */ } 871}; 872MODULE_DEVICE_TABLE(usb, ljca_table); 873 874static struct usb_driver ljca_driver = { 875 .name = "ljca", 876 .id_table = ljca_table, 877 .probe = ljca_probe, 878 .disconnect = ljca_disconnect, 879 .suspend = ljca_suspend, 880 .resume = ljca_resume, 881 .supports_autosuspend = 1, 882}; 883module_usb_driver(ljca_driver); 884 885MODULE_AUTHOR("Wentong Wu <wentong.wu@intel.com>"); 886MODULE_AUTHOR("Zhifeng Wang <zhifeng.wang@intel.com>"); 887MODULE_AUTHOR("Lixu Zhang <lixu.zhang@intel.com>"); 888MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB driver"); 889MODULE_LICENSE("GPL"); 890