1// SPDX-License-Identifier: GPL-2.0
2/*
3 * drivers/usb/host/ehci-orion.c
4 *
5 * Tzachi Perelstein <tzachi@marvell.com>
6 */
7
8#include <linux/kernel.h>
9#include <linux/module.h>
10#include <linux/platform_device.h>
11#include <linux/mbus.h>
12#include <linux/clk.h>
13#include <linux/platform_data/usb-ehci-orion.h>
14#include <linux/of.h>
15#include <linux/phy/phy.h>
16#include <linux/usb.h>
17#include <linux/usb/hcd.h>
18#include <linux/io.h>
19#include <linux/dma-mapping.h>
20
21#include "ehci.h"
22
23#define rdl(off)	readl_relaxed(hcd->regs + (off))
24#define wrl(off, val)	writel_relaxed((val), hcd->regs + (off))
25
26#define USB_CMD			0x140
27#define   USB_CMD_RUN		BIT(0)
28#define   USB_CMD_RESET		BIT(1)
29#define USB_MODE		0x1a8
30#define   USB_MODE_MASK		GENMASK(1, 0)
31#define   USB_MODE_DEVICE	0x2
32#define   USB_MODE_HOST		0x3
33#define   USB_MODE_SDIS		BIT(4)
34#define USB_CAUSE		0x310
35#define USB_MASK		0x314
36#define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
37#define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
38#define USB_IPG			0x360
39#define USB_PHY_PWR_CTRL	0x400
40#define USB_PHY_TX_CTRL		0x420
41#define USB_PHY_RX_CTRL		0x430
42#define USB_PHY_IVREF_CTRL	0x440
43#define USB_PHY_TST_GRP_CTRL	0x450
44
45#define USB_SBUSCFG		0x90
46
47/* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */
48#define USB_SBUSCFG_BAWR_ALIGN_128B	(0x3 << 6)
49#define USB_SBUSCFG_BARD_ALIGN_128B	(0x3 << 3)
50/* AHBBRST = 3	   : Align AHB Burst to INCR16 (64 bytes) */
51#define USB_SBUSCFG_AHBBRST_INCR16	(0x3 << 0)
52
53#define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B	\
54			     | USB_SBUSCFG_BARD_ALIGN_128B	\
55			     | USB_SBUSCFG_AHBBRST_INCR16)
56
57#define DRIVER_DESC "EHCI orion driver"
58
59#define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv)
60
61struct orion_ehci_hcd {
62	struct clk *clk;
63	struct phy *phy;
64};
65
66static struct hc_driver __read_mostly ehci_orion_hc_driver;
67
68/*
69 * Legacy DMA mask is 32 bit.
70 * AC5 has the DDR starting at 8GB, hence it requires
71 * a larger (34-bit) DMA mask, in order for DMA allocations
72 * to succeed:
73 */
74static const u64 dma_mask_orion =	DMA_BIT_MASK(32);
75static const u64 dma_mask_ac5 =		DMA_BIT_MASK(34);
76
77/*
78 * Implement Orion USB controller specification guidelines
79 */
80static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
81{
82	/* The below GLs are according to the Orion Errata document */
83	/*
84	 * Clear interrupt cause and mask
85	 */
86	wrl(USB_CAUSE, 0);
87	wrl(USB_MASK, 0);
88
89	/*
90	 * Reset controller
91	 */
92	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
93	while (rdl(USB_CMD) & USB_CMD_RESET);
94
95	/*
96	 * GL# USB-10: Set IPG for non start of frame packets
97	 * Bits[14:8]=0xc
98	 */
99	wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
100
101	/*
102	 * GL# USB-9: USB 2.0 Power Control
103	 * BG_VSEL[7:6]=0x1
104	 */
105	wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
106
107	/*
108	 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
109	 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
110	 */
111	wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
112
113	/*
114	 * GL# USB-3 GL# USB-9: USB PHY Rx Control
115	 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
116	 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
117	 */
118	wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
119
120	/*
121	 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
122	 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
123	 */
124	wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
125
126	/*
127	 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
128	 * REG_FIFO_SQ_RST[15]=0
129	 */
130	wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
131
132	/*
133	 * Stop and reset controller
134	 */
135	wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN);
136	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
137	while (rdl(USB_CMD) & USB_CMD_RESET);
138
139	/*
140	 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
141	 * TBD: This need to be done after each reset!
142	 * GL# USB-4 Setup USB Host mode
143	 */
144	wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST);
145}
146
147static void
148ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
149			     const struct mbus_dram_target_info *dram)
150{
151	int i;
152
153	for (i = 0; i < 4; i++) {
154		wrl(USB_WINDOW_CTRL(i), 0);
155		wrl(USB_WINDOW_BASE(i), 0);
156	}
157
158	for (i = 0; i < dram->num_cs; i++) {
159		const struct mbus_dram_window *cs = dram->cs + i;
160
161		wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
162					(cs->mbus_attr << 8) |
163					(dram->mbus_dram_target_id << 4) | 1);
164		wrl(USB_WINDOW_BASE(i), cs->base);
165	}
166}
167
168static int ehci_orion_drv_reset(struct usb_hcd *hcd)
169{
170	struct device *dev = hcd->self.controller;
171	int ret;
172
173	ret = ehci_setup(hcd);
174	if (ret)
175		return ret;
176
177	/*
178	 * For SoC without hlock, need to program sbuscfg value to guarantee
179	 * AHB master's burst would not overrun or underrun FIFO.
180	 *
181	 * sbuscfg reg has to be set after usb controller reset, otherwise
182	 * the value would be override to 0.
183	 */
184	if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci"))
185		wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL);
186
187	return ret;
188}
189
190static int __maybe_unused ehci_orion_drv_suspend(struct device *dev)
191{
192	struct usb_hcd *hcd = dev_get_drvdata(dev);
193
194	return ehci_suspend(hcd, device_may_wakeup(dev));
195}
196
197static int __maybe_unused ehci_orion_drv_resume(struct device *dev)
198{
199	struct usb_hcd *hcd = dev_get_drvdata(dev);
200
201	return ehci_resume(hcd, false);
202}
203
204static SIMPLE_DEV_PM_OPS(ehci_orion_pm_ops, ehci_orion_drv_suspend,
205			 ehci_orion_drv_resume);
206
207static const struct ehci_driver_overrides orion_overrides __initconst = {
208	.extra_priv_size =	sizeof(struct orion_ehci_hcd),
209	.reset = ehci_orion_drv_reset,
210};
211
212static int ehci_orion_drv_probe(struct platform_device *pdev)
213{
214	struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev);
215	const struct mbus_dram_target_info *dram;
216	struct resource *res;
217	struct usb_hcd *hcd;
218	struct ehci_hcd *ehci;
219	void __iomem *regs;
220	int irq, err;
221	enum orion_ehci_phy_ver phy_version;
222	struct orion_ehci_hcd *priv;
223	u64 *dma_mask_ptr;
224
225	if (usb_disabled())
226		return -ENODEV;
227
228	pr_debug("Initializing Orion-SoC USB Host Controller\n");
229
230	irq = platform_get_irq(pdev, 0);
231	if (irq < 0) {
232		err = irq;
233		goto err;
234	}
235
236	/*
237	 * Right now device-tree probed devices don't get dma_mask
238	 * set. Since shared usb code relies on it, set it here for
239	 * now. Once we have dma capability bindings this can go away.
240	 */
241	dma_mask_ptr = (u64 *)of_device_get_match_data(&pdev->dev);
242	err = dma_coerce_mask_and_coherent(&pdev->dev, *dma_mask_ptr);
243	if (err)
244		goto err;
245
246	regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
247	if (IS_ERR(regs)) {
248		err = PTR_ERR(regs);
249		goto err;
250	}
251
252	hcd = usb_create_hcd(&ehci_orion_hc_driver,
253			&pdev->dev, dev_name(&pdev->dev));
254	if (!hcd) {
255		err = -ENOMEM;
256		goto err;
257	}
258
259	hcd->rsrc_start = res->start;
260	hcd->rsrc_len = resource_size(res);
261	hcd->regs = regs;
262
263	ehci = hcd_to_ehci(hcd);
264	ehci->caps = hcd->regs + 0x100;
265	hcd->has_tt = 1;
266
267	priv = hcd_to_orion_priv(hcd);
268	/*
269	 * Not all platforms can gate the clock, so it is not an error if
270	 * the clock does not exists.
271	 */
272	priv->clk = devm_clk_get(&pdev->dev, NULL);
273	if (!IS_ERR(priv->clk)) {
274		err = clk_prepare_enable(priv->clk);
275		if (err)
276			goto err_put_hcd;
277	}
278
279	priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
280	if (IS_ERR(priv->phy)) {
281		err = PTR_ERR(priv->phy);
282		if (err != -ENOSYS)
283			goto err_dis_clk;
284	}
285
286	/*
287	 * (Re-)program MBUS remapping windows if we are asked to.
288	 */
289	dram = mv_mbus_dram_info();
290	if (dram)
291		ehci_orion_conf_mbus_windows(hcd, dram);
292
293	/*
294	 * setup Orion USB controller.
295	 */
296	if (pdev->dev.of_node)
297		phy_version = EHCI_PHY_NA;
298	else
299		phy_version = pd->phy_version;
300
301	switch (phy_version) {
302	case EHCI_PHY_NA:	/* dont change USB phy settings */
303		break;
304	case EHCI_PHY_ORION:
305		orion_usb_phy_v1_setup(hcd);
306		break;
307	case EHCI_PHY_DD:
308	case EHCI_PHY_KW:
309	default:
310		dev_warn(&pdev->dev, "USB phy version isn't supported.\n");
311	}
312
313	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
314	if (err)
315		goto err_dis_clk;
316
317	device_wakeup_enable(hcd->self.controller);
318	return 0;
319
320err_dis_clk:
321	if (!IS_ERR(priv->clk))
322		clk_disable_unprepare(priv->clk);
323err_put_hcd:
324	usb_put_hcd(hcd);
325err:
326	dev_err(&pdev->dev, "init %s fail, %d\n",
327		dev_name(&pdev->dev), err);
328
329	return err;
330}
331
332static void ehci_orion_drv_remove(struct platform_device *pdev)
333{
334	struct usb_hcd *hcd = platform_get_drvdata(pdev);
335	struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd);
336
337	usb_remove_hcd(hcd);
338
339	if (!IS_ERR(priv->clk))
340		clk_disable_unprepare(priv->clk);
341
342	usb_put_hcd(hcd);
343}
344
345static const struct of_device_id ehci_orion_dt_ids[] = {
346	{ .compatible = "marvell,orion-ehci", .data = &dma_mask_orion},
347	{ .compatible = "marvell,armada-3700-ehci", .data = &dma_mask_orion},
348	{ .compatible = "marvell,ac5-ehci", .data = &dma_mask_ac5},
349	{},
350};
351MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
352
353static struct platform_driver ehci_orion_driver = {
354	.probe		= ehci_orion_drv_probe,
355	.remove_new	= ehci_orion_drv_remove,
356	.shutdown	= usb_hcd_platform_shutdown,
357	.driver = {
358		.name	= "orion-ehci",
359		.of_match_table = ehci_orion_dt_ids,
360		.pm = &ehci_orion_pm_ops,
361	},
362};
363
364static int __init ehci_orion_init(void)
365{
366	if (usb_disabled())
367		return -ENODEV;
368
369	ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
370	return platform_driver_register(&ehci_orion_driver);
371}
372module_init(ehci_orion_init);
373
374static void __exit ehci_orion_cleanup(void)
375{
376	platform_driver_unregister(&ehci_orion_driver);
377}
378module_exit(ehci_orion_cleanup);
379
380MODULE_DESCRIPTION(DRIVER_DESC);
381MODULE_ALIAS("platform:orion-ehci");
382MODULE_AUTHOR("Tzachi Perelstein");
383MODULE_LICENSE("GPL v2");
384