1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * dummy_hcd.c -- Dummy/Loopback USB host and device emulator driver. 4 * 5 * Maintainer: Alan Stern <stern@rowland.harvard.edu> 6 * 7 * Copyright (C) 2003 David Brownell 8 * Copyright (C) 2003-2005 Alan Stern 9 */ 10 11 12/* 13 * This exposes a device side "USB gadget" API, driven by requests to a 14 * Linux-USB host controller driver. USB traffic is simulated; there's 15 * no need for USB hardware. Use this with two other drivers: 16 * 17 * - Gadget driver, responding to requests (device); 18 * - Host-side device driver, as already familiar in Linux. 19 * 20 * Having this all in one kernel can help some stages of development, 21 * bypassing some hardware (and driver) issues. UML could help too. 22 * 23 * Note: The emulation does not include isochronous transfers! 24 */ 25 26#include <linux/module.h> 27#include <linux/kernel.h> 28#include <linux/delay.h> 29#include <linux/ioport.h> 30#include <linux/slab.h> 31#include <linux/errno.h> 32#include <linux/init.h> 33#include <linux/timer.h> 34#include <linux/list.h> 35#include <linux/interrupt.h> 36#include <linux/platform_device.h> 37#include <linux/usb.h> 38#include <linux/usb/gadget.h> 39#include <linux/usb/hcd.h> 40#include <linux/scatterlist.h> 41 42#include <asm/byteorder.h> 43#include <linux/io.h> 44#include <asm/irq.h> 45#include <asm/unaligned.h> 46 47#define DRIVER_DESC "USB Host+Gadget Emulator" 48#define DRIVER_VERSION "02 May 2005" 49 50#define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */ 51#define POWER_BUDGET_3 900 /* in mA */ 52 53static const char driver_name[] = "dummy_hcd"; 54static const char driver_desc[] = "USB Host+Gadget Emulator"; 55 56static const char gadget_name[] = "dummy_udc"; 57 58MODULE_DESCRIPTION(DRIVER_DESC); 59MODULE_AUTHOR("David Brownell"); 60MODULE_LICENSE("GPL"); 61 62struct dummy_hcd_module_parameters { 63 bool is_super_speed; 64 bool is_high_speed; 65 unsigned int num; 66}; 67 68static struct dummy_hcd_module_parameters mod_data = { 69 .is_super_speed = false, 70 .is_high_speed = true, 71 .num = 1, 72}; 73module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO); 74MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection"); 75module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO); 76MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection"); 77module_param_named(num, mod_data.num, uint, S_IRUGO); 78MODULE_PARM_DESC(num, "number of emulated controllers"); 79/*-------------------------------------------------------------------------*/ 80 81/* gadget side driver data structres */ 82struct dummy_ep { 83 struct list_head queue; 84 unsigned long last_io; /* jiffies timestamp */ 85 struct usb_gadget *gadget; 86 const struct usb_endpoint_descriptor *desc; 87 struct usb_ep ep; 88 unsigned halted:1; 89 unsigned wedged:1; 90 unsigned already_seen:1; 91 unsigned setup_stage:1; 92 unsigned stream_en:1; 93}; 94 95struct dummy_request { 96 struct list_head queue; /* ep's requests */ 97 struct usb_request req; 98}; 99 100static inline struct dummy_ep *usb_ep_to_dummy_ep(struct usb_ep *_ep) 101{ 102 return container_of(_ep, struct dummy_ep, ep); 103} 104 105static inline struct dummy_request *usb_request_to_dummy_request 106 (struct usb_request *_req) 107{ 108 return container_of(_req, struct dummy_request, req); 109} 110 111/*-------------------------------------------------------------------------*/ 112 113/* 114 * Every device has ep0 for control requests, plus up to 30 more endpoints, 115 * in one of two types: 116 * 117 * - Configurable: direction (in/out), type (bulk, iso, etc), and endpoint 118 * number can be changed. Names like "ep-a" are used for this type. 119 * 120 * - Fixed Function: in other cases. some characteristics may be mutable; 121 * that'd be hardware-specific. Names like "ep12out-bulk" are used. 122 * 123 * Gadget drivers are responsible for not setting up conflicting endpoint 124 * configurations, illegal or unsupported packet lengths, and so on. 125 */ 126 127static const char ep0name[] = "ep0"; 128 129static const struct { 130 const char *name; 131 const struct usb_ep_caps caps; 132} ep_info[] = { 133#define EP_INFO(_name, _caps) \ 134 { \ 135 .name = _name, \ 136 .caps = _caps, \ 137 } 138 139/* we don't provide isochronous endpoints since we don't support them */ 140#define TYPE_BULK_OR_INT (USB_EP_CAPS_TYPE_BULK | USB_EP_CAPS_TYPE_INT) 141 142 /* everyone has ep0 */ 143 EP_INFO(ep0name, 144 USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)), 145 /* act like a pxa250: fifteen fixed function endpoints */ 146 EP_INFO("ep1in-bulk", 147 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), 148 EP_INFO("ep2out-bulk", 149 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), 150/* 151 EP_INFO("ep3in-iso", 152 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)), 153 EP_INFO("ep4out-iso", 154 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)), 155*/ 156 EP_INFO("ep5in-int", 157 USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), 158 EP_INFO("ep6in-bulk", 159 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), 160 EP_INFO("ep7out-bulk", 161 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), 162/* 163 EP_INFO("ep8in-iso", 164 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)), 165 EP_INFO("ep9out-iso", 166 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)), 167*/ 168 EP_INFO("ep10in-int", 169 USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), 170 EP_INFO("ep11in-bulk", 171 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), 172 EP_INFO("ep12out-bulk", 173 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), 174/* 175 EP_INFO("ep13in-iso", 176 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)), 177 EP_INFO("ep14out-iso", 178 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)), 179*/ 180 EP_INFO("ep15in-int", 181 USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)), 182 183 /* or like sa1100: two fixed function endpoints */ 184 EP_INFO("ep1out-bulk", 185 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)), 186 EP_INFO("ep2in-bulk", 187 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), 188 189 /* and now some generic EPs so we have enough in multi config */ 190 EP_INFO("ep-aout", 191 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 192 EP_INFO("ep-bin", 193 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), 194 EP_INFO("ep-cout", 195 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 196 EP_INFO("ep-dout", 197 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 198 EP_INFO("ep-ein", 199 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), 200 EP_INFO("ep-fout", 201 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 202 EP_INFO("ep-gin", 203 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), 204 EP_INFO("ep-hout", 205 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 206 EP_INFO("ep-iout", 207 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 208 EP_INFO("ep-jin", 209 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), 210 EP_INFO("ep-kout", 211 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 212 EP_INFO("ep-lin", 213 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), 214 EP_INFO("ep-mout", 215 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), 216 217#undef EP_INFO 218}; 219 220#define DUMMY_ENDPOINTS ARRAY_SIZE(ep_info) 221 222/*-------------------------------------------------------------------------*/ 223 224#define FIFO_SIZE 64 225 226struct urbp { 227 struct urb *urb; 228 struct list_head urbp_list; 229 struct sg_mapping_iter miter; 230 u32 miter_started; 231}; 232 233 234enum dummy_rh_state { 235 DUMMY_RH_RESET, 236 DUMMY_RH_SUSPENDED, 237 DUMMY_RH_RUNNING 238}; 239 240struct dummy_hcd { 241 struct dummy *dum; 242 enum dummy_rh_state rh_state; 243 struct timer_list timer; 244 u32 port_status; 245 u32 old_status; 246 unsigned long re_timeout; 247 248 struct usb_device *udev; 249 struct list_head urbp_list; 250 struct urbp *next_frame_urbp; 251 252 u32 stream_en_ep; 253 u8 num_stream[30 / 2]; 254 255 unsigned active:1; 256 unsigned old_active:1; 257 unsigned resuming:1; 258}; 259 260struct dummy { 261 spinlock_t lock; 262 263 /* 264 * DEVICE/GADGET side support 265 */ 266 struct dummy_ep ep[DUMMY_ENDPOINTS]; 267 int address; 268 int callback_usage; 269 struct usb_gadget gadget; 270 struct usb_gadget_driver *driver; 271 struct dummy_request fifo_req; 272 u8 fifo_buf[FIFO_SIZE]; 273 u16 devstatus; 274 unsigned ints_enabled:1; 275 unsigned udc_suspended:1; 276 unsigned pullup:1; 277 278 /* 279 * HOST side support 280 */ 281 struct dummy_hcd *hs_hcd; 282 struct dummy_hcd *ss_hcd; 283}; 284 285static inline struct dummy_hcd *hcd_to_dummy_hcd(struct usb_hcd *hcd) 286{ 287 return (struct dummy_hcd *) (hcd->hcd_priv); 288} 289 290static inline struct usb_hcd *dummy_hcd_to_hcd(struct dummy_hcd *dum) 291{ 292 return container_of((void *) dum, struct usb_hcd, hcd_priv); 293} 294 295static inline struct device *dummy_dev(struct dummy_hcd *dum) 296{ 297 return dummy_hcd_to_hcd(dum)->self.controller; 298} 299 300static inline struct device *udc_dev(struct dummy *dum) 301{ 302 return dum->gadget.dev.parent; 303} 304 305static inline struct dummy *ep_to_dummy(struct dummy_ep *ep) 306{ 307 return container_of(ep->gadget, struct dummy, gadget); 308} 309 310static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget) 311{ 312 struct dummy *dum = container_of(gadget, struct dummy, gadget); 313 if (dum->gadget.speed == USB_SPEED_SUPER) 314 return dum->ss_hcd; 315 else 316 return dum->hs_hcd; 317} 318 319static inline struct dummy *gadget_dev_to_dummy(struct device *dev) 320{ 321 return container_of(dev, struct dummy, gadget.dev); 322} 323 324/*-------------------------------------------------------------------------*/ 325 326/* DEVICE/GADGET SIDE UTILITY ROUTINES */ 327 328/* called with spinlock held */ 329static void nuke(struct dummy *dum, struct dummy_ep *ep) 330{ 331 while (!list_empty(&ep->queue)) { 332 struct dummy_request *req; 333 334 req = list_entry(ep->queue.next, struct dummy_request, queue); 335 list_del_init(&req->queue); 336 req->req.status = -ESHUTDOWN; 337 338 spin_unlock(&dum->lock); 339 usb_gadget_giveback_request(&ep->ep, &req->req); 340 spin_lock(&dum->lock); 341 } 342} 343 344/* caller must hold lock */ 345static void stop_activity(struct dummy *dum) 346{ 347 int i; 348 349 /* prevent any more requests */ 350 dum->address = 0; 351 352 /* The timer is left running so that outstanding URBs can fail */ 353 354 /* nuke any pending requests first, so driver i/o is quiesced */ 355 for (i = 0; i < DUMMY_ENDPOINTS; ++i) 356 nuke(dum, &dum->ep[i]); 357 358 /* driver now does any non-usb quiescing necessary */ 359} 360 361/** 362 * set_link_state_by_speed() - Sets the current state of the link according to 363 * the hcd speed 364 * @dum_hcd: pointer to the dummy_hcd structure to update the link state for 365 * 366 * This function updates the port_status according to the link state and the 367 * speed of the hcd. 368 */ 369static void set_link_state_by_speed(struct dummy_hcd *dum_hcd) 370{ 371 struct dummy *dum = dum_hcd->dum; 372 373 if (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3) { 374 if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) == 0) { 375 dum_hcd->port_status = 0; 376 } else if (!dum->pullup || dum->udc_suspended) { 377 /* UDC suspend must cause a disconnect */ 378 dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION | 379 USB_PORT_STAT_ENABLE); 380 if ((dum_hcd->old_status & 381 USB_PORT_STAT_CONNECTION) != 0) 382 dum_hcd->port_status |= 383 (USB_PORT_STAT_C_CONNECTION << 16); 384 } else { 385 /* device is connected and not suspended */ 386 dum_hcd->port_status |= (USB_PORT_STAT_CONNECTION | 387 USB_PORT_STAT_SPEED_5GBPS) ; 388 if ((dum_hcd->old_status & 389 USB_PORT_STAT_CONNECTION) == 0) 390 dum_hcd->port_status |= 391 (USB_PORT_STAT_C_CONNECTION << 16); 392 if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) && 393 (dum_hcd->port_status & 394 USB_PORT_STAT_LINK_STATE) == USB_SS_PORT_LS_U0 && 395 dum_hcd->rh_state != DUMMY_RH_SUSPENDED) 396 dum_hcd->active = 1; 397 } 398 } else { 399 if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0) { 400 dum_hcd->port_status = 0; 401 } else if (!dum->pullup || dum->udc_suspended) { 402 /* UDC suspend must cause a disconnect */ 403 dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION | 404 USB_PORT_STAT_ENABLE | 405 USB_PORT_STAT_LOW_SPEED | 406 USB_PORT_STAT_HIGH_SPEED | 407 USB_PORT_STAT_SUSPEND); 408 if ((dum_hcd->old_status & 409 USB_PORT_STAT_CONNECTION) != 0) 410 dum_hcd->port_status |= 411 (USB_PORT_STAT_C_CONNECTION << 16); 412 } else { 413 dum_hcd->port_status |= USB_PORT_STAT_CONNECTION; 414 if ((dum_hcd->old_status & 415 USB_PORT_STAT_CONNECTION) == 0) 416 dum_hcd->port_status |= 417 (USB_PORT_STAT_C_CONNECTION << 16); 418 if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0) 419 dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; 420 else if ((dum_hcd->port_status & 421 USB_PORT_STAT_SUSPEND) == 0 && 422 dum_hcd->rh_state != DUMMY_RH_SUSPENDED) 423 dum_hcd->active = 1; 424 } 425 } 426} 427 428/* caller must hold lock */ 429static void set_link_state(struct dummy_hcd *dum_hcd) 430 __must_hold(&dum->lock) 431{ 432 struct dummy *dum = dum_hcd->dum; 433 unsigned int power_bit; 434 435 dum_hcd->active = 0; 436 if (dum->pullup) 437 if ((dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 && 438 dum->gadget.speed != USB_SPEED_SUPER) || 439 (dummy_hcd_to_hcd(dum_hcd)->speed != HCD_USB3 && 440 dum->gadget.speed == USB_SPEED_SUPER)) 441 return; 442 443 set_link_state_by_speed(dum_hcd); 444 power_bit = (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 ? 445 USB_SS_PORT_STAT_POWER : USB_PORT_STAT_POWER); 446 447 if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 || 448 dum_hcd->active) 449 dum_hcd->resuming = 0; 450 451 /* Currently !connected or in reset */ 452 if ((dum_hcd->port_status & power_bit) == 0 || 453 (dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) { 454 unsigned int disconnect = power_bit & 455 dum_hcd->old_status & (~dum_hcd->port_status); 456 unsigned int reset = USB_PORT_STAT_RESET & 457 (~dum_hcd->old_status) & dum_hcd->port_status; 458 459 /* Report reset and disconnect events to the driver */ 460 if (dum->ints_enabled && (disconnect || reset)) { 461 stop_activity(dum); 462 ++dum->callback_usage; 463 spin_unlock(&dum->lock); 464 if (reset) 465 usb_gadget_udc_reset(&dum->gadget, dum->driver); 466 else 467 dum->driver->disconnect(&dum->gadget); 468 spin_lock(&dum->lock); 469 --dum->callback_usage; 470 } 471 } else if (dum_hcd->active != dum_hcd->old_active && 472 dum->ints_enabled) { 473 ++dum->callback_usage; 474 spin_unlock(&dum->lock); 475 if (dum_hcd->old_active && dum->driver->suspend) 476 dum->driver->suspend(&dum->gadget); 477 else if (!dum_hcd->old_active && dum->driver->resume) 478 dum->driver->resume(&dum->gadget); 479 spin_lock(&dum->lock); 480 --dum->callback_usage; 481 } 482 483 dum_hcd->old_status = dum_hcd->port_status; 484 dum_hcd->old_active = dum_hcd->active; 485} 486 487/*-------------------------------------------------------------------------*/ 488 489/* DEVICE/GADGET SIDE DRIVER 490 * 491 * This only tracks gadget state. All the work is done when the host 492 * side tries some (emulated) i/o operation. Real device controller 493 * drivers would do real i/o using dma, fifos, irqs, timers, etc. 494 */ 495 496#define is_enabled(dum) \ 497 (dum->port_status & USB_PORT_STAT_ENABLE) 498 499static int dummy_enable(struct usb_ep *_ep, 500 const struct usb_endpoint_descriptor *desc) 501{ 502 struct dummy *dum; 503 struct dummy_hcd *dum_hcd; 504 struct dummy_ep *ep; 505 unsigned max; 506 int retval; 507 508 ep = usb_ep_to_dummy_ep(_ep); 509 if (!_ep || !desc || ep->desc || _ep->name == ep0name 510 || desc->bDescriptorType != USB_DT_ENDPOINT) 511 return -EINVAL; 512 dum = ep_to_dummy(ep); 513 if (!dum->driver) 514 return -ESHUTDOWN; 515 516 dum_hcd = gadget_to_dummy_hcd(&dum->gadget); 517 if (!is_enabled(dum_hcd)) 518 return -ESHUTDOWN; 519 520 /* 521 * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the 522 * maximum packet size. 523 * For SS devices the wMaxPacketSize is limited by 1024. 524 */ 525 max = usb_endpoint_maxp(desc); 526 527 /* drivers must not request bad settings, since lower levels 528 * (hardware or its drivers) may not check. some endpoints 529 * can't do iso, many have maxpacket limitations, etc. 530 * 531 * since this "hardware" driver is here to help debugging, we 532 * have some extra sanity checks. (there could be more though, 533 * especially for "ep9out" style fixed function ones.) 534 */ 535 retval = -EINVAL; 536 switch (usb_endpoint_type(desc)) { 537 case USB_ENDPOINT_XFER_BULK: 538 if (strstr(ep->ep.name, "-iso") 539 || strstr(ep->ep.name, "-int")) { 540 goto done; 541 } 542 switch (dum->gadget.speed) { 543 case USB_SPEED_SUPER: 544 if (max == 1024) 545 break; 546 goto done; 547 case USB_SPEED_HIGH: 548 if (max == 512) 549 break; 550 goto done; 551 case USB_SPEED_FULL: 552 if (max == 8 || max == 16 || max == 32 || max == 64) 553 /* we'll fake any legal size */ 554 break; 555 /* save a return statement */ 556 fallthrough; 557 default: 558 goto done; 559 } 560 break; 561 case USB_ENDPOINT_XFER_INT: 562 if (strstr(ep->ep.name, "-iso")) /* bulk is ok */ 563 goto done; 564 /* real hardware might not handle all packet sizes */ 565 switch (dum->gadget.speed) { 566 case USB_SPEED_SUPER: 567 case USB_SPEED_HIGH: 568 if (max <= 1024) 569 break; 570 /* save a return statement */ 571 fallthrough; 572 case USB_SPEED_FULL: 573 if (max <= 64) 574 break; 575 /* save a return statement */ 576 fallthrough; 577 default: 578 if (max <= 8) 579 break; 580 goto done; 581 } 582 break; 583 case USB_ENDPOINT_XFER_ISOC: 584 if (strstr(ep->ep.name, "-bulk") 585 || strstr(ep->ep.name, "-int")) 586 goto done; 587 /* real hardware might not handle all packet sizes */ 588 switch (dum->gadget.speed) { 589 case USB_SPEED_SUPER: 590 case USB_SPEED_HIGH: 591 if (max <= 1024) 592 break; 593 /* save a return statement */ 594 fallthrough; 595 case USB_SPEED_FULL: 596 if (max <= 1023) 597 break; 598 /* save a return statement */ 599 fallthrough; 600 default: 601 goto done; 602 } 603 break; 604 default: 605 /* few chips support control except on ep0 */ 606 goto done; 607 } 608 609 _ep->maxpacket = max; 610 if (usb_ss_max_streams(_ep->comp_desc)) { 611 if (!usb_endpoint_xfer_bulk(desc)) { 612 dev_err(udc_dev(dum), "Can't enable stream support on " 613 "non-bulk ep %s\n", _ep->name); 614 return -EINVAL; 615 } 616 ep->stream_en = 1; 617 } 618 ep->desc = desc; 619 620 dev_dbg(udc_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d stream %s\n", 621 _ep->name, 622 desc->bEndpointAddress & 0x0f, 623 (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out", 624 usb_ep_type_string(usb_endpoint_type(desc)), 625 max, ep->stream_en ? "enabled" : "disabled"); 626 627 /* at this point real hardware should be NAKing transfers 628 * to that endpoint, until a buffer is queued to it. 629 */ 630 ep->halted = ep->wedged = 0; 631 retval = 0; 632done: 633 return retval; 634} 635 636static int dummy_disable(struct usb_ep *_ep) 637{ 638 struct dummy_ep *ep; 639 struct dummy *dum; 640 unsigned long flags; 641 642 ep = usb_ep_to_dummy_ep(_ep); 643 if (!_ep || !ep->desc || _ep->name == ep0name) 644 return -EINVAL; 645 dum = ep_to_dummy(ep); 646 647 spin_lock_irqsave(&dum->lock, flags); 648 ep->desc = NULL; 649 ep->stream_en = 0; 650 nuke(dum, ep); 651 spin_unlock_irqrestore(&dum->lock, flags); 652 653 dev_dbg(udc_dev(dum), "disabled %s\n", _ep->name); 654 return 0; 655} 656 657static struct usb_request *dummy_alloc_request(struct usb_ep *_ep, 658 gfp_t mem_flags) 659{ 660 struct dummy_request *req; 661 662 if (!_ep) 663 return NULL; 664 665 req = kzalloc(sizeof(*req), mem_flags); 666 if (!req) 667 return NULL; 668 INIT_LIST_HEAD(&req->queue); 669 return &req->req; 670} 671 672static void dummy_free_request(struct usb_ep *_ep, struct usb_request *_req) 673{ 674 struct dummy_request *req; 675 676 if (!_ep || !_req) { 677 WARN_ON(1); 678 return; 679 } 680 681 req = usb_request_to_dummy_request(_req); 682 WARN_ON(!list_empty(&req->queue)); 683 kfree(req); 684} 685 686static void fifo_complete(struct usb_ep *ep, struct usb_request *req) 687{ 688} 689 690static int dummy_queue(struct usb_ep *_ep, struct usb_request *_req, 691 gfp_t mem_flags) 692{ 693 struct dummy_ep *ep; 694 struct dummy_request *req; 695 struct dummy *dum; 696 struct dummy_hcd *dum_hcd; 697 unsigned long flags; 698 699 req = usb_request_to_dummy_request(_req); 700 if (!_req || !list_empty(&req->queue) || !_req->complete) 701 return -EINVAL; 702 703 ep = usb_ep_to_dummy_ep(_ep); 704 if (!_ep || (!ep->desc && _ep->name != ep0name)) 705 return -EINVAL; 706 707 dum = ep_to_dummy(ep); 708 dum_hcd = gadget_to_dummy_hcd(&dum->gadget); 709 if (!dum->driver || !is_enabled(dum_hcd)) 710 return -ESHUTDOWN; 711 712#if 0 713 dev_dbg(udc_dev(dum), "ep %p queue req %p to %s, len %d buf %p\n", 714 ep, _req, _ep->name, _req->length, _req->buf); 715#endif 716 _req->status = -EINPROGRESS; 717 _req->actual = 0; 718 spin_lock_irqsave(&dum->lock, flags); 719 720 /* implement an emulated single-request FIFO */ 721 if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) && 722 list_empty(&dum->fifo_req.queue) && 723 list_empty(&ep->queue) && 724 _req->length <= FIFO_SIZE) { 725 req = &dum->fifo_req; 726 req->req = *_req; 727 req->req.buf = dum->fifo_buf; 728 memcpy(dum->fifo_buf, _req->buf, _req->length); 729 req->req.context = dum; 730 req->req.complete = fifo_complete; 731 732 list_add_tail(&req->queue, &ep->queue); 733 spin_unlock(&dum->lock); 734 _req->actual = _req->length; 735 _req->status = 0; 736 usb_gadget_giveback_request(_ep, _req); 737 spin_lock(&dum->lock); 738 } else 739 list_add_tail(&req->queue, &ep->queue); 740 spin_unlock_irqrestore(&dum->lock, flags); 741 742 /* real hardware would likely enable transfers here, in case 743 * it'd been left NAKing. 744 */ 745 return 0; 746} 747 748static int dummy_dequeue(struct usb_ep *_ep, struct usb_request *_req) 749{ 750 struct dummy_ep *ep; 751 struct dummy *dum; 752 int retval = -EINVAL; 753 unsigned long flags; 754 struct dummy_request *req = NULL, *iter; 755 756 if (!_ep || !_req) 757 return retval; 758 ep = usb_ep_to_dummy_ep(_ep); 759 dum = ep_to_dummy(ep); 760 761 if (!dum->driver) 762 return -ESHUTDOWN; 763 764 local_irq_save(flags); 765 spin_lock(&dum->lock); 766 list_for_each_entry(iter, &ep->queue, queue) { 767 if (&iter->req != _req) 768 continue; 769 list_del_init(&iter->queue); 770 _req->status = -ECONNRESET; 771 req = iter; 772 retval = 0; 773 break; 774 } 775 spin_unlock(&dum->lock); 776 777 if (retval == 0) { 778 dev_dbg(udc_dev(dum), 779 "dequeued req %p from %s, len %d buf %p\n", 780 req, _ep->name, _req->length, _req->buf); 781 usb_gadget_giveback_request(_ep, _req); 782 } 783 local_irq_restore(flags); 784 return retval; 785} 786 787static int 788dummy_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) 789{ 790 struct dummy_ep *ep; 791 struct dummy *dum; 792 793 if (!_ep) 794 return -EINVAL; 795 ep = usb_ep_to_dummy_ep(_ep); 796 dum = ep_to_dummy(ep); 797 if (!dum->driver) 798 return -ESHUTDOWN; 799 if (!value) 800 ep->halted = ep->wedged = 0; 801 else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) && 802 !list_empty(&ep->queue)) 803 return -EAGAIN; 804 else { 805 ep->halted = 1; 806 if (wedged) 807 ep->wedged = 1; 808 } 809 /* FIXME clear emulated data toggle too */ 810 return 0; 811} 812 813static int 814dummy_set_halt(struct usb_ep *_ep, int value) 815{ 816 return dummy_set_halt_and_wedge(_ep, value, 0); 817} 818 819static int dummy_set_wedge(struct usb_ep *_ep) 820{ 821 if (!_ep || _ep->name == ep0name) 822 return -EINVAL; 823 return dummy_set_halt_and_wedge(_ep, 1, 1); 824} 825 826static const struct usb_ep_ops dummy_ep_ops = { 827 .enable = dummy_enable, 828 .disable = dummy_disable, 829 830 .alloc_request = dummy_alloc_request, 831 .free_request = dummy_free_request, 832 833 .queue = dummy_queue, 834 .dequeue = dummy_dequeue, 835 836 .set_halt = dummy_set_halt, 837 .set_wedge = dummy_set_wedge, 838}; 839 840/*-------------------------------------------------------------------------*/ 841 842/* there are both host and device side versions of this call ... */ 843static int dummy_g_get_frame(struct usb_gadget *_gadget) 844{ 845 struct timespec64 ts64; 846 847 ktime_get_ts64(&ts64); 848 return ts64.tv_nsec / NSEC_PER_MSEC; 849} 850 851static int dummy_wakeup(struct usb_gadget *_gadget) 852{ 853 struct dummy_hcd *dum_hcd; 854 855 dum_hcd = gadget_to_dummy_hcd(_gadget); 856 if (!(dum_hcd->dum->devstatus & ((1 << USB_DEVICE_B_HNP_ENABLE) 857 | (1 << USB_DEVICE_REMOTE_WAKEUP)))) 858 return -EINVAL; 859 if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0) 860 return -ENOLINK; 861 if ((dum_hcd->port_status & USB_PORT_STAT_SUSPEND) == 0 && 862 dum_hcd->rh_state != DUMMY_RH_SUSPENDED) 863 return -EIO; 864 865 /* FIXME: What if the root hub is suspended but the port isn't? */ 866 867 /* hub notices our request, issues downstream resume, etc */ 868 dum_hcd->resuming = 1; 869 dum_hcd->re_timeout = jiffies + msecs_to_jiffies(20); 870 mod_timer(&dummy_hcd_to_hcd(dum_hcd)->rh_timer, dum_hcd->re_timeout); 871 return 0; 872} 873 874static int dummy_set_selfpowered(struct usb_gadget *_gadget, int value) 875{ 876 struct dummy *dum; 877 878 _gadget->is_selfpowered = (value != 0); 879 dum = gadget_to_dummy_hcd(_gadget)->dum; 880 if (value) 881 dum->devstatus |= (1 << USB_DEVICE_SELF_POWERED); 882 else 883 dum->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); 884 return 0; 885} 886 887static void dummy_udc_update_ep0(struct dummy *dum) 888{ 889 if (dum->gadget.speed == USB_SPEED_SUPER) 890 dum->ep[0].ep.maxpacket = 9; 891 else 892 dum->ep[0].ep.maxpacket = 64; 893} 894 895static int dummy_pullup(struct usb_gadget *_gadget, int value) 896{ 897 struct dummy_hcd *dum_hcd; 898 struct dummy *dum; 899 unsigned long flags; 900 901 dum = gadget_dev_to_dummy(&_gadget->dev); 902 dum_hcd = gadget_to_dummy_hcd(_gadget); 903 904 spin_lock_irqsave(&dum->lock, flags); 905 dum->pullup = (value != 0); 906 set_link_state(dum_hcd); 907 if (value == 0) { 908 /* 909 * Emulate synchronize_irq(): wait for callbacks to finish. 910 * This seems to be the best place to emulate the call to 911 * synchronize_irq() that's in usb_gadget_remove_driver(). 912 * Doing it in dummy_udc_stop() would be too late since it 913 * is called after the unbind callback and unbind shouldn't 914 * be invoked until all the other callbacks are finished. 915 */ 916 while (dum->callback_usage > 0) { 917 spin_unlock_irqrestore(&dum->lock, flags); 918 usleep_range(1000, 2000); 919 spin_lock_irqsave(&dum->lock, flags); 920 } 921 } 922 spin_unlock_irqrestore(&dum->lock, flags); 923 924 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd)); 925 return 0; 926} 927 928static void dummy_udc_set_speed(struct usb_gadget *_gadget, 929 enum usb_device_speed speed) 930{ 931 struct dummy *dum; 932 933 dum = gadget_dev_to_dummy(&_gadget->dev); 934 dum->gadget.speed = speed; 935 dummy_udc_update_ep0(dum); 936} 937 938static void dummy_udc_async_callbacks(struct usb_gadget *_gadget, bool enable) 939{ 940 struct dummy *dum = gadget_dev_to_dummy(&_gadget->dev); 941 942 spin_lock_irq(&dum->lock); 943 dum->ints_enabled = enable; 944 spin_unlock_irq(&dum->lock); 945} 946 947static int dummy_udc_start(struct usb_gadget *g, 948 struct usb_gadget_driver *driver); 949static int dummy_udc_stop(struct usb_gadget *g); 950 951static const struct usb_gadget_ops dummy_ops = { 952 .get_frame = dummy_g_get_frame, 953 .wakeup = dummy_wakeup, 954 .set_selfpowered = dummy_set_selfpowered, 955 .pullup = dummy_pullup, 956 .udc_start = dummy_udc_start, 957 .udc_stop = dummy_udc_stop, 958 .udc_set_speed = dummy_udc_set_speed, 959 .udc_async_callbacks = dummy_udc_async_callbacks, 960}; 961 962/*-------------------------------------------------------------------------*/ 963 964/* "function" sysfs attribute */ 965static ssize_t function_show(struct device *dev, struct device_attribute *attr, 966 char *buf) 967{ 968 struct dummy *dum = gadget_dev_to_dummy(dev); 969 970 if (!dum->driver || !dum->driver->function) 971 return 0; 972 return scnprintf(buf, PAGE_SIZE, "%s\n", dum->driver->function); 973} 974static DEVICE_ATTR_RO(function); 975 976/*-------------------------------------------------------------------------*/ 977 978/* 979 * Driver registration/unregistration. 980 * 981 * This is basically hardware-specific; there's usually only one real USB 982 * device (not host) controller since that's how USB devices are intended 983 * to work. So most implementations of these api calls will rely on the 984 * fact that only one driver will ever bind to the hardware. But curious 985 * hardware can be built with discrete components, so the gadget API doesn't 986 * require that assumption. 987 * 988 * For this emulator, it might be convenient to create a usb device 989 * for each driver that registers: just add to a big root hub. 990 */ 991 992static int dummy_udc_start(struct usb_gadget *g, 993 struct usb_gadget_driver *driver) 994{ 995 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g); 996 struct dummy *dum = dum_hcd->dum; 997 998 switch (g->speed) { 999 /* All the speeds we support */ 1000 case USB_SPEED_LOW: 1001 case USB_SPEED_FULL: 1002 case USB_SPEED_HIGH: 1003 case USB_SPEED_SUPER: 1004 break; 1005 default: 1006 dev_err(dummy_dev(dum_hcd), "Unsupported driver max speed %d\n", 1007 driver->max_speed); 1008 return -EINVAL; 1009 } 1010 1011 /* 1012 * DEVICE side init ... the layer above hardware, which 1013 * can't enumerate without help from the driver we're binding. 1014 */ 1015 1016 spin_lock_irq(&dum->lock); 1017 dum->devstatus = 0; 1018 dum->driver = driver; 1019 spin_unlock_irq(&dum->lock); 1020 1021 return 0; 1022} 1023 1024static int dummy_udc_stop(struct usb_gadget *g) 1025{ 1026 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g); 1027 struct dummy *dum = dum_hcd->dum; 1028 1029 spin_lock_irq(&dum->lock); 1030 dum->ints_enabled = 0; 1031 stop_activity(dum); 1032 dum->driver = NULL; 1033 spin_unlock_irq(&dum->lock); 1034 1035 return 0; 1036} 1037 1038#undef is_enabled 1039 1040/* The gadget structure is stored inside the hcd structure and will be 1041 * released along with it. */ 1042static void init_dummy_udc_hw(struct dummy *dum) 1043{ 1044 int i; 1045 1046 INIT_LIST_HEAD(&dum->gadget.ep_list); 1047 for (i = 0; i < DUMMY_ENDPOINTS; i++) { 1048 struct dummy_ep *ep = &dum->ep[i]; 1049 1050 if (!ep_info[i].name) 1051 break; 1052 ep->ep.name = ep_info[i].name; 1053 ep->ep.caps = ep_info[i].caps; 1054 ep->ep.ops = &dummy_ep_ops; 1055 list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list); 1056 ep->halted = ep->wedged = ep->already_seen = 1057 ep->setup_stage = 0; 1058 usb_ep_set_maxpacket_limit(&ep->ep, ~0); 1059 ep->ep.max_streams = 16; 1060 ep->last_io = jiffies; 1061 ep->gadget = &dum->gadget; 1062 ep->desc = NULL; 1063 INIT_LIST_HEAD(&ep->queue); 1064 } 1065 1066 dum->gadget.ep0 = &dum->ep[0].ep; 1067 list_del_init(&dum->ep[0].ep.ep_list); 1068 INIT_LIST_HEAD(&dum->fifo_req.queue); 1069 1070#ifdef CONFIG_USB_OTG 1071 dum->gadget.is_otg = 1; 1072#endif 1073} 1074 1075static int dummy_udc_probe(struct platform_device *pdev) 1076{ 1077 struct dummy *dum; 1078 int rc; 1079 1080 dum = *((void **)dev_get_platdata(&pdev->dev)); 1081 /* Clear usb_gadget region for new registration to udc-core */ 1082 memzero_explicit(&dum->gadget, sizeof(struct usb_gadget)); 1083 dum->gadget.name = gadget_name; 1084 dum->gadget.ops = &dummy_ops; 1085 if (mod_data.is_super_speed) 1086 dum->gadget.max_speed = USB_SPEED_SUPER; 1087 else if (mod_data.is_high_speed) 1088 dum->gadget.max_speed = USB_SPEED_HIGH; 1089 else 1090 dum->gadget.max_speed = USB_SPEED_FULL; 1091 1092 dum->gadget.dev.parent = &pdev->dev; 1093 init_dummy_udc_hw(dum); 1094 1095 rc = usb_add_gadget_udc(&pdev->dev, &dum->gadget); 1096 if (rc < 0) 1097 goto err_udc; 1098 1099 rc = device_create_file(&dum->gadget.dev, &dev_attr_function); 1100 if (rc < 0) 1101 goto err_dev; 1102 platform_set_drvdata(pdev, dum); 1103 return rc; 1104 1105err_dev: 1106 usb_del_gadget_udc(&dum->gadget); 1107err_udc: 1108 return rc; 1109} 1110 1111static void dummy_udc_remove(struct platform_device *pdev) 1112{ 1113 struct dummy *dum = platform_get_drvdata(pdev); 1114 1115 device_remove_file(&dum->gadget.dev, &dev_attr_function); 1116 usb_del_gadget_udc(&dum->gadget); 1117} 1118 1119static void dummy_udc_pm(struct dummy *dum, struct dummy_hcd *dum_hcd, 1120 int suspend) 1121{ 1122 spin_lock_irq(&dum->lock); 1123 dum->udc_suspended = suspend; 1124 set_link_state(dum_hcd); 1125 spin_unlock_irq(&dum->lock); 1126} 1127 1128static int dummy_udc_suspend(struct platform_device *pdev, pm_message_t state) 1129{ 1130 struct dummy *dum = platform_get_drvdata(pdev); 1131 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(&dum->gadget); 1132 1133 dev_dbg(&pdev->dev, "%s\n", __func__); 1134 dummy_udc_pm(dum, dum_hcd, 1); 1135 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd)); 1136 return 0; 1137} 1138 1139static int dummy_udc_resume(struct platform_device *pdev) 1140{ 1141 struct dummy *dum = platform_get_drvdata(pdev); 1142 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(&dum->gadget); 1143 1144 dev_dbg(&pdev->dev, "%s\n", __func__); 1145 dummy_udc_pm(dum, dum_hcd, 0); 1146 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd)); 1147 return 0; 1148} 1149 1150static struct platform_driver dummy_udc_driver = { 1151 .probe = dummy_udc_probe, 1152 .remove_new = dummy_udc_remove, 1153 .suspend = dummy_udc_suspend, 1154 .resume = dummy_udc_resume, 1155 .driver = { 1156 .name = gadget_name, 1157 }, 1158}; 1159 1160/*-------------------------------------------------------------------------*/ 1161 1162static unsigned int dummy_get_ep_idx(const struct usb_endpoint_descriptor *desc) 1163{ 1164 unsigned int index; 1165 1166 index = usb_endpoint_num(desc) << 1; 1167 if (usb_endpoint_dir_in(desc)) 1168 index |= 1; 1169 return index; 1170} 1171 1172/* HOST SIDE DRIVER 1173 * 1174 * this uses the hcd framework to hook up to host side drivers. 1175 * its root hub will only have one device, otherwise it acts like 1176 * a normal host controller. 1177 * 1178 * when urbs are queued, they're just stuck on a list that we 1179 * scan in a timer callback. that callback connects writes from 1180 * the host with reads from the device, and so on, based on the 1181 * usb 2.0 rules. 1182 */ 1183 1184static int dummy_ep_stream_en(struct dummy_hcd *dum_hcd, struct urb *urb) 1185{ 1186 const struct usb_endpoint_descriptor *desc = &urb->ep->desc; 1187 u32 index; 1188 1189 if (!usb_endpoint_xfer_bulk(desc)) 1190 return 0; 1191 1192 index = dummy_get_ep_idx(desc); 1193 return (1 << index) & dum_hcd->stream_en_ep; 1194} 1195 1196/* 1197 * The max stream number is saved as a nibble so for the 30 possible endpoints 1198 * we only 15 bytes of memory. Therefore we are limited to max 16 streams (0 1199 * means we use only 1 stream). The maximum according to the spec is 16bit so 1200 * if the 16 stream limit is about to go, the array size should be incremented 1201 * to 30 elements of type u16. 1202 */ 1203static int get_max_streams_for_pipe(struct dummy_hcd *dum_hcd, 1204 unsigned int pipe) 1205{ 1206 int max_streams; 1207 1208 max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)]; 1209 if (usb_pipeout(pipe)) 1210 max_streams >>= 4; 1211 else 1212 max_streams &= 0xf; 1213 max_streams++; 1214 return max_streams; 1215} 1216 1217static void set_max_streams_for_pipe(struct dummy_hcd *dum_hcd, 1218 unsigned int pipe, unsigned int streams) 1219{ 1220 int max_streams; 1221 1222 streams--; 1223 max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)]; 1224 if (usb_pipeout(pipe)) { 1225 streams <<= 4; 1226 max_streams &= 0xf; 1227 } else { 1228 max_streams &= 0xf0; 1229 } 1230 max_streams |= streams; 1231 dum_hcd->num_stream[usb_pipeendpoint(pipe)] = max_streams; 1232} 1233 1234static int dummy_validate_stream(struct dummy_hcd *dum_hcd, struct urb *urb) 1235{ 1236 unsigned int max_streams; 1237 int enabled; 1238 1239 enabled = dummy_ep_stream_en(dum_hcd, urb); 1240 if (!urb->stream_id) { 1241 if (enabled) 1242 return -EINVAL; 1243 return 0; 1244 } 1245 if (!enabled) 1246 return -EINVAL; 1247 1248 max_streams = get_max_streams_for_pipe(dum_hcd, 1249 usb_pipeendpoint(urb->pipe)); 1250 if (urb->stream_id > max_streams) { 1251 dev_err(dummy_dev(dum_hcd), "Stream id %d is out of range.\n", 1252 urb->stream_id); 1253 BUG(); 1254 return -EINVAL; 1255 } 1256 return 0; 1257} 1258 1259static int dummy_urb_enqueue( 1260 struct usb_hcd *hcd, 1261 struct urb *urb, 1262 gfp_t mem_flags 1263) { 1264 struct dummy_hcd *dum_hcd; 1265 struct urbp *urbp; 1266 unsigned long flags; 1267 int rc; 1268 1269 urbp = kmalloc(sizeof *urbp, mem_flags); 1270 if (!urbp) 1271 return -ENOMEM; 1272 urbp->urb = urb; 1273 urbp->miter_started = 0; 1274 1275 dum_hcd = hcd_to_dummy_hcd(hcd); 1276 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 1277 1278 rc = dummy_validate_stream(dum_hcd, urb); 1279 if (rc) { 1280 kfree(urbp); 1281 goto done; 1282 } 1283 1284 rc = usb_hcd_link_urb_to_ep(hcd, urb); 1285 if (rc) { 1286 kfree(urbp); 1287 goto done; 1288 } 1289 1290 if (!dum_hcd->udev) { 1291 dum_hcd->udev = urb->dev; 1292 usb_get_dev(dum_hcd->udev); 1293 } else if (unlikely(dum_hcd->udev != urb->dev)) 1294 dev_err(dummy_dev(dum_hcd), "usb_device address has changed!\n"); 1295 1296 list_add_tail(&urbp->urbp_list, &dum_hcd->urbp_list); 1297 urb->hcpriv = urbp; 1298 if (!dum_hcd->next_frame_urbp) 1299 dum_hcd->next_frame_urbp = urbp; 1300 if (usb_pipetype(urb->pipe) == PIPE_CONTROL) 1301 urb->error_count = 1; /* mark as a new urb */ 1302 1303 /* kick the scheduler, it'll do the rest */ 1304 if (!timer_pending(&dum_hcd->timer)) 1305 mod_timer(&dum_hcd->timer, jiffies + 1); 1306 1307 done: 1308 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 1309 return rc; 1310} 1311 1312static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) 1313{ 1314 struct dummy_hcd *dum_hcd; 1315 unsigned long flags; 1316 int rc; 1317 1318 /* giveback happens automatically in timer callback, 1319 * so make sure the callback happens */ 1320 dum_hcd = hcd_to_dummy_hcd(hcd); 1321 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 1322 1323 rc = usb_hcd_check_unlink_urb(hcd, urb, status); 1324 if (!rc && dum_hcd->rh_state != DUMMY_RH_RUNNING && 1325 !list_empty(&dum_hcd->urbp_list)) 1326 mod_timer(&dum_hcd->timer, jiffies); 1327 1328 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 1329 return rc; 1330} 1331 1332static int dummy_perform_transfer(struct urb *urb, struct dummy_request *req, 1333 u32 len) 1334{ 1335 void *ubuf, *rbuf; 1336 struct urbp *urbp = urb->hcpriv; 1337 int to_host; 1338 struct sg_mapping_iter *miter = &urbp->miter; 1339 u32 trans = 0; 1340 u32 this_sg; 1341 bool next_sg; 1342 1343 to_host = usb_urb_dir_in(urb); 1344 rbuf = req->req.buf + req->req.actual; 1345 1346 if (!urb->num_sgs) { 1347 ubuf = urb->transfer_buffer + urb->actual_length; 1348 if (to_host) 1349 memcpy(ubuf, rbuf, len); 1350 else 1351 memcpy(rbuf, ubuf, len); 1352 return len; 1353 } 1354 1355 if (!urbp->miter_started) { 1356 u32 flags = SG_MITER_ATOMIC; 1357 1358 if (to_host) 1359 flags |= SG_MITER_TO_SG; 1360 else 1361 flags |= SG_MITER_FROM_SG; 1362 1363 sg_miter_start(miter, urb->sg, urb->num_sgs, flags); 1364 urbp->miter_started = 1; 1365 } 1366 next_sg = sg_miter_next(miter); 1367 if (next_sg == false) { 1368 WARN_ON_ONCE(1); 1369 return -EINVAL; 1370 } 1371 do { 1372 ubuf = miter->addr; 1373 this_sg = min_t(u32, len, miter->length); 1374 miter->consumed = this_sg; 1375 trans += this_sg; 1376 1377 if (to_host) 1378 memcpy(ubuf, rbuf, this_sg); 1379 else 1380 memcpy(rbuf, ubuf, this_sg); 1381 len -= this_sg; 1382 1383 if (!len) 1384 break; 1385 next_sg = sg_miter_next(miter); 1386 if (next_sg == false) { 1387 WARN_ON_ONCE(1); 1388 return -EINVAL; 1389 } 1390 1391 rbuf += this_sg; 1392 } while (1); 1393 1394 sg_miter_stop(miter); 1395 return trans; 1396} 1397 1398/* transfer up to a frame's worth; caller must own lock */ 1399static int transfer(struct dummy_hcd *dum_hcd, struct urb *urb, 1400 struct dummy_ep *ep, int limit, int *status) 1401{ 1402 struct dummy *dum = dum_hcd->dum; 1403 struct dummy_request *req; 1404 int sent = 0; 1405 1406top: 1407 /* if there's no request queued, the device is NAKing; return */ 1408 list_for_each_entry(req, &ep->queue, queue) { 1409 unsigned host_len, dev_len, len; 1410 int is_short, to_host; 1411 int rescan = 0; 1412 1413 if (dummy_ep_stream_en(dum_hcd, urb)) { 1414 if ((urb->stream_id != req->req.stream_id)) 1415 continue; 1416 } 1417 1418 /* 1..N packets of ep->ep.maxpacket each ... the last one 1419 * may be short (including zero length). 1420 * 1421 * writer can send a zlp explicitly (length 0) or implicitly 1422 * (length mod maxpacket zero, and 'zero' flag); they always 1423 * terminate reads. 1424 */ 1425 host_len = urb->transfer_buffer_length - urb->actual_length; 1426 dev_len = req->req.length - req->req.actual; 1427 len = min(host_len, dev_len); 1428 1429 /* FIXME update emulated data toggle too */ 1430 1431 to_host = usb_urb_dir_in(urb); 1432 if (unlikely(len == 0)) 1433 is_short = 1; 1434 else { 1435 /* not enough bandwidth left? */ 1436 if (limit < ep->ep.maxpacket && limit < len) 1437 break; 1438 len = min_t(unsigned, len, limit); 1439 if (len == 0) 1440 break; 1441 1442 /* send multiple of maxpacket first, then remainder */ 1443 if (len >= ep->ep.maxpacket) { 1444 is_short = 0; 1445 if (len % ep->ep.maxpacket) 1446 rescan = 1; 1447 len -= len % ep->ep.maxpacket; 1448 } else { 1449 is_short = 1; 1450 } 1451 1452 len = dummy_perform_transfer(urb, req, len); 1453 1454 ep->last_io = jiffies; 1455 if ((int)len < 0) { 1456 req->req.status = len; 1457 } else { 1458 limit -= len; 1459 sent += len; 1460 urb->actual_length += len; 1461 req->req.actual += len; 1462 } 1463 } 1464 1465 /* short packets terminate, maybe with overflow/underflow. 1466 * it's only really an error to write too much. 1467 * 1468 * partially filling a buffer optionally blocks queue advances 1469 * (so completion handlers can clean up the queue) but we don't 1470 * need to emulate such data-in-flight. 1471 */ 1472 if (is_short) { 1473 if (host_len == dev_len) { 1474 req->req.status = 0; 1475 *status = 0; 1476 } else if (to_host) { 1477 req->req.status = 0; 1478 if (dev_len > host_len) 1479 *status = -EOVERFLOW; 1480 else 1481 *status = 0; 1482 } else { 1483 *status = 0; 1484 if (host_len > dev_len) 1485 req->req.status = -EOVERFLOW; 1486 else 1487 req->req.status = 0; 1488 } 1489 1490 /* 1491 * many requests terminate without a short packet. 1492 * send a zlp if demanded by flags. 1493 */ 1494 } else { 1495 if (req->req.length == req->req.actual) { 1496 if (req->req.zero && to_host) 1497 rescan = 1; 1498 else 1499 req->req.status = 0; 1500 } 1501 if (urb->transfer_buffer_length == urb->actual_length) { 1502 if (urb->transfer_flags & URB_ZERO_PACKET && 1503 !to_host) 1504 rescan = 1; 1505 else 1506 *status = 0; 1507 } 1508 } 1509 1510 /* device side completion --> continuable */ 1511 if (req->req.status != -EINPROGRESS) { 1512 list_del_init(&req->queue); 1513 1514 spin_unlock(&dum->lock); 1515 usb_gadget_giveback_request(&ep->ep, &req->req); 1516 spin_lock(&dum->lock); 1517 1518 /* requests might have been unlinked... */ 1519 rescan = 1; 1520 } 1521 1522 /* host side completion --> terminate */ 1523 if (*status != -EINPROGRESS) 1524 break; 1525 1526 /* rescan to continue with any other queued i/o */ 1527 if (rescan) 1528 goto top; 1529 } 1530 return sent; 1531} 1532 1533static int periodic_bytes(struct dummy *dum, struct dummy_ep *ep) 1534{ 1535 int limit = ep->ep.maxpacket; 1536 1537 if (dum->gadget.speed == USB_SPEED_HIGH) { 1538 int tmp; 1539 1540 /* high bandwidth mode */ 1541 tmp = usb_endpoint_maxp_mult(ep->desc); 1542 tmp *= 8 /* applies to entire frame */; 1543 limit += limit * tmp; 1544 } 1545 if (dum->gadget.speed == USB_SPEED_SUPER) { 1546 switch (usb_endpoint_type(ep->desc)) { 1547 case USB_ENDPOINT_XFER_ISOC: 1548 /* Sec. 4.4.8.2 USB3.0 Spec */ 1549 limit = 3 * 16 * 1024 * 8; 1550 break; 1551 case USB_ENDPOINT_XFER_INT: 1552 /* Sec. 4.4.7.2 USB3.0 Spec */ 1553 limit = 3 * 1024 * 8; 1554 break; 1555 case USB_ENDPOINT_XFER_BULK: 1556 default: 1557 break; 1558 } 1559 } 1560 return limit; 1561} 1562 1563#define is_active(dum_hcd) ((dum_hcd->port_status & \ 1564 (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | \ 1565 USB_PORT_STAT_SUSPEND)) \ 1566 == (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE)) 1567 1568static struct dummy_ep *find_endpoint(struct dummy *dum, u8 address) 1569{ 1570 int i; 1571 1572 if (!is_active((dum->gadget.speed == USB_SPEED_SUPER ? 1573 dum->ss_hcd : dum->hs_hcd))) 1574 return NULL; 1575 if (!dum->ints_enabled) 1576 return NULL; 1577 if ((address & ~USB_DIR_IN) == 0) 1578 return &dum->ep[0]; 1579 for (i = 1; i < DUMMY_ENDPOINTS; i++) { 1580 struct dummy_ep *ep = &dum->ep[i]; 1581 1582 if (!ep->desc) 1583 continue; 1584 if (ep->desc->bEndpointAddress == address) 1585 return ep; 1586 } 1587 return NULL; 1588} 1589 1590#undef is_active 1591 1592#define Dev_Request (USB_TYPE_STANDARD | USB_RECIP_DEVICE) 1593#define Dev_InRequest (Dev_Request | USB_DIR_IN) 1594#define Intf_Request (USB_TYPE_STANDARD | USB_RECIP_INTERFACE) 1595#define Intf_InRequest (Intf_Request | USB_DIR_IN) 1596#define Ep_Request (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT) 1597#define Ep_InRequest (Ep_Request | USB_DIR_IN) 1598 1599 1600/** 1601 * handle_control_request() - handles all control transfers 1602 * @dum_hcd: pointer to dummy (the_controller) 1603 * @urb: the urb request to handle 1604 * @setup: pointer to the setup data for a USB device control 1605 * request 1606 * @status: pointer to request handling status 1607 * 1608 * Return 0 - if the request was handled 1609 * 1 - if the request wasn't handles 1610 * error code on error 1611 */ 1612static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb, 1613 struct usb_ctrlrequest *setup, 1614 int *status) 1615{ 1616 struct dummy_ep *ep2; 1617 struct dummy *dum = dum_hcd->dum; 1618 int ret_val = 1; 1619 unsigned w_index; 1620 unsigned w_value; 1621 1622 w_index = le16_to_cpu(setup->wIndex); 1623 w_value = le16_to_cpu(setup->wValue); 1624 switch (setup->bRequest) { 1625 case USB_REQ_SET_ADDRESS: 1626 if (setup->bRequestType != Dev_Request) 1627 break; 1628 dum->address = w_value; 1629 *status = 0; 1630 dev_dbg(udc_dev(dum), "set_address = %d\n", 1631 w_value); 1632 ret_val = 0; 1633 break; 1634 case USB_REQ_SET_FEATURE: 1635 if (setup->bRequestType == Dev_Request) { 1636 ret_val = 0; 1637 switch (w_value) { 1638 case USB_DEVICE_REMOTE_WAKEUP: 1639 break; 1640 case USB_DEVICE_B_HNP_ENABLE: 1641 dum->gadget.b_hnp_enable = 1; 1642 break; 1643 case USB_DEVICE_A_HNP_SUPPORT: 1644 dum->gadget.a_hnp_support = 1; 1645 break; 1646 case USB_DEVICE_A_ALT_HNP_SUPPORT: 1647 dum->gadget.a_alt_hnp_support = 1; 1648 break; 1649 case USB_DEVICE_U1_ENABLE: 1650 if (dummy_hcd_to_hcd(dum_hcd)->speed == 1651 HCD_USB3) 1652 w_value = USB_DEV_STAT_U1_ENABLED; 1653 else 1654 ret_val = -EOPNOTSUPP; 1655 break; 1656 case USB_DEVICE_U2_ENABLE: 1657 if (dummy_hcd_to_hcd(dum_hcd)->speed == 1658 HCD_USB3) 1659 w_value = USB_DEV_STAT_U2_ENABLED; 1660 else 1661 ret_val = -EOPNOTSUPP; 1662 break; 1663 case USB_DEVICE_LTM_ENABLE: 1664 if (dummy_hcd_to_hcd(dum_hcd)->speed == 1665 HCD_USB3) 1666 w_value = USB_DEV_STAT_LTM_ENABLED; 1667 else 1668 ret_val = -EOPNOTSUPP; 1669 break; 1670 default: 1671 ret_val = -EOPNOTSUPP; 1672 } 1673 if (ret_val == 0) { 1674 dum->devstatus |= (1 << w_value); 1675 *status = 0; 1676 } 1677 } else if (setup->bRequestType == Ep_Request) { 1678 /* endpoint halt */ 1679 ep2 = find_endpoint(dum, w_index); 1680 if (!ep2 || ep2->ep.name == ep0name) { 1681 ret_val = -EOPNOTSUPP; 1682 break; 1683 } 1684 ep2->halted = 1; 1685 ret_val = 0; 1686 *status = 0; 1687 } 1688 break; 1689 case USB_REQ_CLEAR_FEATURE: 1690 if (setup->bRequestType == Dev_Request) { 1691 ret_val = 0; 1692 switch (w_value) { 1693 case USB_DEVICE_REMOTE_WAKEUP: 1694 w_value = USB_DEVICE_REMOTE_WAKEUP; 1695 break; 1696 case USB_DEVICE_U1_ENABLE: 1697 if (dummy_hcd_to_hcd(dum_hcd)->speed == 1698 HCD_USB3) 1699 w_value = USB_DEV_STAT_U1_ENABLED; 1700 else 1701 ret_val = -EOPNOTSUPP; 1702 break; 1703 case USB_DEVICE_U2_ENABLE: 1704 if (dummy_hcd_to_hcd(dum_hcd)->speed == 1705 HCD_USB3) 1706 w_value = USB_DEV_STAT_U2_ENABLED; 1707 else 1708 ret_val = -EOPNOTSUPP; 1709 break; 1710 case USB_DEVICE_LTM_ENABLE: 1711 if (dummy_hcd_to_hcd(dum_hcd)->speed == 1712 HCD_USB3) 1713 w_value = USB_DEV_STAT_LTM_ENABLED; 1714 else 1715 ret_val = -EOPNOTSUPP; 1716 break; 1717 default: 1718 ret_val = -EOPNOTSUPP; 1719 break; 1720 } 1721 if (ret_val == 0) { 1722 dum->devstatus &= ~(1 << w_value); 1723 *status = 0; 1724 } 1725 } else if (setup->bRequestType == Ep_Request) { 1726 /* endpoint halt */ 1727 ep2 = find_endpoint(dum, w_index); 1728 if (!ep2) { 1729 ret_val = -EOPNOTSUPP; 1730 break; 1731 } 1732 if (!ep2->wedged) 1733 ep2->halted = 0; 1734 ret_val = 0; 1735 *status = 0; 1736 } 1737 break; 1738 case USB_REQ_GET_STATUS: 1739 if (setup->bRequestType == Dev_InRequest 1740 || setup->bRequestType == Intf_InRequest 1741 || setup->bRequestType == Ep_InRequest) { 1742 char *buf; 1743 /* 1744 * device: remote wakeup, selfpowered 1745 * interface: nothing 1746 * endpoint: halt 1747 */ 1748 buf = (char *)urb->transfer_buffer; 1749 if (urb->transfer_buffer_length > 0) { 1750 if (setup->bRequestType == Ep_InRequest) { 1751 ep2 = find_endpoint(dum, w_index); 1752 if (!ep2) { 1753 ret_val = -EOPNOTSUPP; 1754 break; 1755 } 1756 buf[0] = ep2->halted; 1757 } else if (setup->bRequestType == 1758 Dev_InRequest) { 1759 buf[0] = (u8)dum->devstatus; 1760 } else 1761 buf[0] = 0; 1762 } 1763 if (urb->transfer_buffer_length > 1) 1764 buf[1] = 0; 1765 urb->actual_length = min_t(u32, 2, 1766 urb->transfer_buffer_length); 1767 ret_val = 0; 1768 *status = 0; 1769 } 1770 break; 1771 } 1772 return ret_val; 1773} 1774 1775/* 1776 * Drive both sides of the transfers; looks like irq handlers to both 1777 * drivers except that the callbacks are invoked from soft interrupt 1778 * context. 1779 */ 1780static void dummy_timer(struct timer_list *t) 1781{ 1782 struct dummy_hcd *dum_hcd = from_timer(dum_hcd, t, timer); 1783 struct dummy *dum = dum_hcd->dum; 1784 struct urbp *urbp, *tmp; 1785 unsigned long flags; 1786 int limit, total; 1787 int i; 1788 1789 /* simplistic model for one frame's bandwidth */ 1790 /* FIXME: account for transaction and packet overhead */ 1791 switch (dum->gadget.speed) { 1792 case USB_SPEED_LOW: 1793 total = 8/*bytes*/ * 12/*packets*/; 1794 break; 1795 case USB_SPEED_FULL: 1796 total = 64/*bytes*/ * 19/*packets*/; 1797 break; 1798 case USB_SPEED_HIGH: 1799 total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/; 1800 break; 1801 case USB_SPEED_SUPER: 1802 /* Bus speed is 500000 bytes/ms, so use a little less */ 1803 total = 490000; 1804 break; 1805 default: /* Can't happen */ 1806 dev_err(dummy_dev(dum_hcd), "bogus device speed\n"); 1807 total = 0; 1808 break; 1809 } 1810 1811 /* FIXME if HZ != 1000 this will probably misbehave ... */ 1812 1813 /* look at each urb queued by the host side driver */ 1814 spin_lock_irqsave(&dum->lock, flags); 1815 1816 if (!dum_hcd->udev) { 1817 dev_err(dummy_dev(dum_hcd), 1818 "timer fired with no URBs pending?\n"); 1819 spin_unlock_irqrestore(&dum->lock, flags); 1820 return; 1821 } 1822 dum_hcd->next_frame_urbp = NULL; 1823 1824 for (i = 0; i < DUMMY_ENDPOINTS; i++) { 1825 if (!ep_info[i].name) 1826 break; 1827 dum->ep[i].already_seen = 0; 1828 } 1829 1830restart: 1831 list_for_each_entry_safe(urbp, tmp, &dum_hcd->urbp_list, urbp_list) { 1832 struct urb *urb; 1833 struct dummy_request *req; 1834 u8 address; 1835 struct dummy_ep *ep = NULL; 1836 int status = -EINPROGRESS; 1837 1838 /* stop when we reach URBs queued after the timer interrupt */ 1839 if (urbp == dum_hcd->next_frame_urbp) 1840 break; 1841 1842 urb = urbp->urb; 1843 if (urb->unlinked) 1844 goto return_urb; 1845 else if (dum_hcd->rh_state != DUMMY_RH_RUNNING) 1846 continue; 1847 1848 /* Used up this frame's bandwidth? */ 1849 if (total <= 0) 1850 continue; 1851 1852 /* find the gadget's ep for this request (if configured) */ 1853 address = usb_pipeendpoint (urb->pipe); 1854 if (usb_urb_dir_in(urb)) 1855 address |= USB_DIR_IN; 1856 ep = find_endpoint(dum, address); 1857 if (!ep) { 1858 /* set_configuration() disagreement */ 1859 dev_dbg(dummy_dev(dum_hcd), 1860 "no ep configured for urb %p\n", 1861 urb); 1862 status = -EPROTO; 1863 goto return_urb; 1864 } 1865 1866 if (ep->already_seen) 1867 continue; 1868 ep->already_seen = 1; 1869 if (ep == &dum->ep[0] && urb->error_count) { 1870 ep->setup_stage = 1; /* a new urb */ 1871 urb->error_count = 0; 1872 } 1873 if (ep->halted && !ep->setup_stage) { 1874 /* NOTE: must not be iso! */ 1875 dev_dbg(dummy_dev(dum_hcd), "ep %s halted, urb %p\n", 1876 ep->ep.name, urb); 1877 status = -EPIPE; 1878 goto return_urb; 1879 } 1880 /* FIXME make sure both ends agree on maxpacket */ 1881 1882 /* handle control requests */ 1883 if (ep == &dum->ep[0] && ep->setup_stage) { 1884 struct usb_ctrlrequest setup; 1885 int value; 1886 1887 setup = *(struct usb_ctrlrequest *) urb->setup_packet; 1888 /* paranoia, in case of stale queued data */ 1889 list_for_each_entry(req, &ep->queue, queue) { 1890 list_del_init(&req->queue); 1891 req->req.status = -EOVERFLOW; 1892 dev_dbg(udc_dev(dum), "stale req = %p\n", 1893 req); 1894 1895 spin_unlock(&dum->lock); 1896 usb_gadget_giveback_request(&ep->ep, &req->req); 1897 spin_lock(&dum->lock); 1898 ep->already_seen = 0; 1899 goto restart; 1900 } 1901 1902 /* gadget driver never sees set_address or operations 1903 * on standard feature flags. some hardware doesn't 1904 * even expose them. 1905 */ 1906 ep->last_io = jiffies; 1907 ep->setup_stage = 0; 1908 ep->halted = 0; 1909 1910 value = handle_control_request(dum_hcd, urb, &setup, 1911 &status); 1912 1913 /* gadget driver handles all other requests. block 1914 * until setup() returns; no reentrancy issues etc. 1915 */ 1916 if (value > 0) { 1917 ++dum->callback_usage; 1918 spin_unlock(&dum->lock); 1919 value = dum->driver->setup(&dum->gadget, 1920 &setup); 1921 spin_lock(&dum->lock); 1922 --dum->callback_usage; 1923 1924 if (value >= 0) { 1925 /* no delays (max 64KB data stage) */ 1926 limit = 64*1024; 1927 goto treat_control_like_bulk; 1928 } 1929 /* error, see below */ 1930 } 1931 1932 if (value < 0) { 1933 if (value != -EOPNOTSUPP) 1934 dev_dbg(udc_dev(dum), 1935 "setup --> %d\n", 1936 value); 1937 status = -EPIPE; 1938 urb->actual_length = 0; 1939 } 1940 1941 goto return_urb; 1942 } 1943 1944 /* non-control requests */ 1945 limit = total; 1946 switch (usb_pipetype(urb->pipe)) { 1947 case PIPE_ISOCHRONOUS: 1948 /* 1949 * We don't support isochronous. But if we did, 1950 * here are some of the issues we'd have to face: 1951 * 1952 * Is it urb->interval since the last xfer? 1953 * Use urb->iso_frame_desc[i]. 1954 * Complete whether or not ep has requests queued. 1955 * Report random errors, to debug drivers. 1956 */ 1957 limit = max(limit, periodic_bytes(dum, ep)); 1958 status = -EINVAL; /* fail all xfers */ 1959 break; 1960 1961 case PIPE_INTERRUPT: 1962 /* FIXME is it urb->interval since the last xfer? 1963 * this almost certainly polls too fast. 1964 */ 1965 limit = max(limit, periodic_bytes(dum, ep)); 1966 fallthrough; 1967 1968 default: 1969treat_control_like_bulk: 1970 ep->last_io = jiffies; 1971 total -= transfer(dum_hcd, urb, ep, limit, &status); 1972 break; 1973 } 1974 1975 /* incomplete transfer? */ 1976 if (status == -EINPROGRESS) 1977 continue; 1978 1979return_urb: 1980 list_del(&urbp->urbp_list); 1981 kfree(urbp); 1982 if (ep) 1983 ep->already_seen = ep->setup_stage = 0; 1984 1985 usb_hcd_unlink_urb_from_ep(dummy_hcd_to_hcd(dum_hcd), urb); 1986 spin_unlock(&dum->lock); 1987 usb_hcd_giveback_urb(dummy_hcd_to_hcd(dum_hcd), urb, status); 1988 spin_lock(&dum->lock); 1989 1990 goto restart; 1991 } 1992 1993 if (list_empty(&dum_hcd->urbp_list)) { 1994 usb_put_dev(dum_hcd->udev); 1995 dum_hcd->udev = NULL; 1996 } else if (dum_hcd->rh_state == DUMMY_RH_RUNNING) { 1997 /* want a 1 msec delay here */ 1998 mod_timer(&dum_hcd->timer, jiffies + msecs_to_jiffies(1)); 1999 } 2000 2001 spin_unlock_irqrestore(&dum->lock, flags); 2002} 2003 2004/*-------------------------------------------------------------------------*/ 2005 2006#define PORT_C_MASK \ 2007 ((USB_PORT_STAT_C_CONNECTION \ 2008 | USB_PORT_STAT_C_ENABLE \ 2009 | USB_PORT_STAT_C_SUSPEND \ 2010 | USB_PORT_STAT_C_OVERCURRENT \ 2011 | USB_PORT_STAT_C_RESET) << 16) 2012 2013static int dummy_hub_status(struct usb_hcd *hcd, char *buf) 2014{ 2015 struct dummy_hcd *dum_hcd; 2016 unsigned long flags; 2017 int retval = 0; 2018 2019 dum_hcd = hcd_to_dummy_hcd(hcd); 2020 2021 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 2022 if (!HCD_HW_ACCESSIBLE(hcd)) 2023 goto done; 2024 2025 if (dum_hcd->resuming && time_after_eq(jiffies, dum_hcd->re_timeout)) { 2026 dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16); 2027 dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; 2028 set_link_state(dum_hcd); 2029 } 2030 2031 if ((dum_hcd->port_status & PORT_C_MASK) != 0) { 2032 *buf = (1 << 1); 2033 dev_dbg(dummy_dev(dum_hcd), "port status 0x%08x has changes\n", 2034 dum_hcd->port_status); 2035 retval = 1; 2036 if (dum_hcd->rh_state == DUMMY_RH_SUSPENDED) 2037 usb_hcd_resume_root_hub(hcd); 2038 } 2039done: 2040 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 2041 return retval; 2042} 2043 2044/* usb 3.0 root hub device descriptor */ 2045static struct { 2046 struct usb_bos_descriptor bos; 2047 struct usb_ss_cap_descriptor ss_cap; 2048} __packed usb3_bos_desc = { 2049 2050 .bos = { 2051 .bLength = USB_DT_BOS_SIZE, 2052 .bDescriptorType = USB_DT_BOS, 2053 .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)), 2054 .bNumDeviceCaps = 1, 2055 }, 2056 .ss_cap = { 2057 .bLength = USB_DT_USB_SS_CAP_SIZE, 2058 .bDescriptorType = USB_DT_DEVICE_CAPABILITY, 2059 .bDevCapabilityType = USB_SS_CAP_TYPE, 2060 .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION), 2061 .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION), 2062 }, 2063}; 2064 2065static inline void 2066ss_hub_descriptor(struct usb_hub_descriptor *desc) 2067{ 2068 memset(desc, 0, sizeof *desc); 2069 desc->bDescriptorType = USB_DT_SS_HUB; 2070 desc->bDescLength = 12; 2071 desc->wHubCharacteristics = cpu_to_le16( 2072 HUB_CHAR_INDV_PORT_LPSM | 2073 HUB_CHAR_COMMON_OCPM); 2074 desc->bNbrPorts = 1; 2075 desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/ 2076 desc->u.ss.DeviceRemovable = 0; 2077} 2078 2079static inline void hub_descriptor(struct usb_hub_descriptor *desc) 2080{ 2081 memset(desc, 0, sizeof *desc); 2082 desc->bDescriptorType = USB_DT_HUB; 2083 desc->bDescLength = 9; 2084 desc->wHubCharacteristics = cpu_to_le16( 2085 HUB_CHAR_INDV_PORT_LPSM | 2086 HUB_CHAR_COMMON_OCPM); 2087 desc->bNbrPorts = 1; 2088 desc->u.hs.DeviceRemovable[0] = 0; 2089 desc->u.hs.DeviceRemovable[1] = 0xff; /* PortPwrCtrlMask */ 2090} 2091 2092static int dummy_hub_control( 2093 struct usb_hcd *hcd, 2094 u16 typeReq, 2095 u16 wValue, 2096 u16 wIndex, 2097 char *buf, 2098 u16 wLength 2099) { 2100 struct dummy_hcd *dum_hcd; 2101 int retval = 0; 2102 unsigned long flags; 2103 2104 if (!HCD_HW_ACCESSIBLE(hcd)) 2105 return -ETIMEDOUT; 2106 2107 dum_hcd = hcd_to_dummy_hcd(hcd); 2108 2109 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 2110 switch (typeReq) { 2111 case ClearHubFeature: 2112 break; 2113 case ClearPortFeature: 2114 switch (wValue) { 2115 case USB_PORT_FEAT_SUSPEND: 2116 if (hcd->speed == HCD_USB3) { 2117 dev_dbg(dummy_dev(dum_hcd), 2118 "USB_PORT_FEAT_SUSPEND req not " 2119 "supported for USB 3.0 roothub\n"); 2120 goto error; 2121 } 2122 if (dum_hcd->port_status & USB_PORT_STAT_SUSPEND) { 2123 /* 20msec resume signaling */ 2124 dum_hcd->resuming = 1; 2125 dum_hcd->re_timeout = jiffies + 2126 msecs_to_jiffies(20); 2127 } 2128 break; 2129 case USB_PORT_FEAT_POWER: 2130 dev_dbg(dummy_dev(dum_hcd), "power-off\n"); 2131 if (hcd->speed == HCD_USB3) 2132 dum_hcd->port_status &= ~USB_SS_PORT_STAT_POWER; 2133 else 2134 dum_hcd->port_status &= ~USB_PORT_STAT_POWER; 2135 set_link_state(dum_hcd); 2136 break; 2137 case USB_PORT_FEAT_ENABLE: 2138 case USB_PORT_FEAT_C_ENABLE: 2139 case USB_PORT_FEAT_C_SUSPEND: 2140 /* Not allowed for USB-3 */ 2141 if (hcd->speed == HCD_USB3) 2142 goto error; 2143 fallthrough; 2144 case USB_PORT_FEAT_C_CONNECTION: 2145 case USB_PORT_FEAT_C_RESET: 2146 dum_hcd->port_status &= ~(1 << wValue); 2147 set_link_state(dum_hcd); 2148 break; 2149 default: 2150 /* Disallow INDICATOR and C_OVER_CURRENT */ 2151 goto error; 2152 } 2153 break; 2154 case GetHubDescriptor: 2155 if (hcd->speed == HCD_USB3 && 2156 (wLength < USB_DT_SS_HUB_SIZE || 2157 wValue != (USB_DT_SS_HUB << 8))) { 2158 dev_dbg(dummy_dev(dum_hcd), 2159 "Wrong hub descriptor type for " 2160 "USB 3.0 roothub.\n"); 2161 goto error; 2162 } 2163 if (hcd->speed == HCD_USB3) 2164 ss_hub_descriptor((struct usb_hub_descriptor *) buf); 2165 else 2166 hub_descriptor((struct usb_hub_descriptor *) buf); 2167 break; 2168 2169 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 2170 if (hcd->speed != HCD_USB3) 2171 goto error; 2172 2173 if ((wValue >> 8) != USB_DT_BOS) 2174 goto error; 2175 2176 memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc)); 2177 retval = sizeof(usb3_bos_desc); 2178 break; 2179 2180 case GetHubStatus: 2181 *(__le32 *) buf = cpu_to_le32(0); 2182 break; 2183 case GetPortStatus: 2184 if (wIndex != 1) 2185 retval = -EPIPE; 2186 2187 /* whoever resets or resumes must GetPortStatus to 2188 * complete it!! 2189 */ 2190 if (dum_hcd->resuming && 2191 time_after_eq(jiffies, dum_hcd->re_timeout)) { 2192 dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16); 2193 dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; 2194 } 2195 if ((dum_hcd->port_status & USB_PORT_STAT_RESET) != 0 && 2196 time_after_eq(jiffies, dum_hcd->re_timeout)) { 2197 dum_hcd->port_status |= (USB_PORT_STAT_C_RESET << 16); 2198 dum_hcd->port_status &= ~USB_PORT_STAT_RESET; 2199 if (dum_hcd->dum->pullup) { 2200 dum_hcd->port_status |= USB_PORT_STAT_ENABLE; 2201 2202 if (hcd->speed < HCD_USB3) { 2203 switch (dum_hcd->dum->gadget.speed) { 2204 case USB_SPEED_HIGH: 2205 dum_hcd->port_status |= 2206 USB_PORT_STAT_HIGH_SPEED; 2207 break; 2208 case USB_SPEED_LOW: 2209 dum_hcd->dum->gadget.ep0-> 2210 maxpacket = 8; 2211 dum_hcd->port_status |= 2212 USB_PORT_STAT_LOW_SPEED; 2213 break; 2214 default: 2215 break; 2216 } 2217 } 2218 } 2219 } 2220 set_link_state(dum_hcd); 2221 ((__le16 *) buf)[0] = cpu_to_le16(dum_hcd->port_status); 2222 ((__le16 *) buf)[1] = cpu_to_le16(dum_hcd->port_status >> 16); 2223 break; 2224 case SetHubFeature: 2225 retval = -EPIPE; 2226 break; 2227 case SetPortFeature: 2228 switch (wValue) { 2229 case USB_PORT_FEAT_LINK_STATE: 2230 if (hcd->speed != HCD_USB3) { 2231 dev_dbg(dummy_dev(dum_hcd), 2232 "USB_PORT_FEAT_LINK_STATE req not " 2233 "supported for USB 2.0 roothub\n"); 2234 goto error; 2235 } 2236 /* 2237 * Since this is dummy we don't have an actual link so 2238 * there is nothing to do for the SET_LINK_STATE cmd 2239 */ 2240 break; 2241 case USB_PORT_FEAT_U1_TIMEOUT: 2242 case USB_PORT_FEAT_U2_TIMEOUT: 2243 /* TODO: add suspend/resume support! */ 2244 if (hcd->speed != HCD_USB3) { 2245 dev_dbg(dummy_dev(dum_hcd), 2246 "USB_PORT_FEAT_U1/2_TIMEOUT req not " 2247 "supported for USB 2.0 roothub\n"); 2248 goto error; 2249 } 2250 break; 2251 case USB_PORT_FEAT_SUSPEND: 2252 /* Applicable only for USB2.0 hub */ 2253 if (hcd->speed == HCD_USB3) { 2254 dev_dbg(dummy_dev(dum_hcd), 2255 "USB_PORT_FEAT_SUSPEND req not " 2256 "supported for USB 3.0 roothub\n"); 2257 goto error; 2258 } 2259 if (dum_hcd->active) { 2260 dum_hcd->port_status |= USB_PORT_STAT_SUSPEND; 2261 2262 /* HNP would happen here; for now we 2263 * assume b_bus_req is always true. 2264 */ 2265 set_link_state(dum_hcd); 2266 if (((1 << USB_DEVICE_B_HNP_ENABLE) 2267 & dum_hcd->dum->devstatus) != 0) 2268 dev_dbg(dummy_dev(dum_hcd), 2269 "no HNP yet!\n"); 2270 } 2271 break; 2272 case USB_PORT_FEAT_POWER: 2273 if (hcd->speed == HCD_USB3) 2274 dum_hcd->port_status |= USB_SS_PORT_STAT_POWER; 2275 else 2276 dum_hcd->port_status |= USB_PORT_STAT_POWER; 2277 set_link_state(dum_hcd); 2278 break; 2279 case USB_PORT_FEAT_BH_PORT_RESET: 2280 /* Applicable only for USB3.0 hub */ 2281 if (hcd->speed != HCD_USB3) { 2282 dev_dbg(dummy_dev(dum_hcd), 2283 "USB_PORT_FEAT_BH_PORT_RESET req not " 2284 "supported for USB 2.0 roothub\n"); 2285 goto error; 2286 } 2287 fallthrough; 2288 case USB_PORT_FEAT_RESET: 2289 if (!(dum_hcd->port_status & USB_PORT_STAT_CONNECTION)) 2290 break; 2291 /* if it's already enabled, disable */ 2292 if (hcd->speed == HCD_USB3) { 2293 dum_hcd->port_status = 2294 (USB_SS_PORT_STAT_POWER | 2295 USB_PORT_STAT_CONNECTION | 2296 USB_PORT_STAT_RESET); 2297 } else { 2298 dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE 2299 | USB_PORT_STAT_LOW_SPEED 2300 | USB_PORT_STAT_HIGH_SPEED); 2301 dum_hcd->port_status |= USB_PORT_STAT_RESET; 2302 } 2303 /* 2304 * We want to reset device status. All but the 2305 * Self powered feature 2306 */ 2307 dum_hcd->dum->devstatus &= 2308 (1 << USB_DEVICE_SELF_POWERED); 2309 /* 2310 * FIXME USB3.0: what is the correct reset signaling 2311 * interval? Is it still 50msec as for HS? 2312 */ 2313 dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50); 2314 set_link_state(dum_hcd); 2315 break; 2316 case USB_PORT_FEAT_C_CONNECTION: 2317 case USB_PORT_FEAT_C_RESET: 2318 case USB_PORT_FEAT_C_ENABLE: 2319 case USB_PORT_FEAT_C_SUSPEND: 2320 /* Not allowed for USB-3, and ignored for USB-2 */ 2321 if (hcd->speed == HCD_USB3) 2322 goto error; 2323 break; 2324 default: 2325 /* Disallow TEST, INDICATOR, and C_OVER_CURRENT */ 2326 goto error; 2327 } 2328 break; 2329 case GetPortErrorCount: 2330 if (hcd->speed != HCD_USB3) { 2331 dev_dbg(dummy_dev(dum_hcd), 2332 "GetPortErrorCount req not " 2333 "supported for USB 2.0 roothub\n"); 2334 goto error; 2335 } 2336 /* We'll always return 0 since this is a dummy hub */ 2337 *(__le32 *) buf = cpu_to_le32(0); 2338 break; 2339 case SetHubDepth: 2340 if (hcd->speed != HCD_USB3) { 2341 dev_dbg(dummy_dev(dum_hcd), 2342 "SetHubDepth req not supported for " 2343 "USB 2.0 roothub\n"); 2344 goto error; 2345 } 2346 break; 2347 default: 2348 dev_dbg(dummy_dev(dum_hcd), 2349 "hub control req%04x v%04x i%04x l%d\n", 2350 typeReq, wValue, wIndex, wLength); 2351error: 2352 /* "protocol stall" on error */ 2353 retval = -EPIPE; 2354 } 2355 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 2356 2357 if ((dum_hcd->port_status & PORT_C_MASK) != 0) 2358 usb_hcd_poll_rh_status(hcd); 2359 return retval; 2360} 2361 2362static int dummy_bus_suspend(struct usb_hcd *hcd) 2363{ 2364 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2365 2366 dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); 2367 2368 spin_lock_irq(&dum_hcd->dum->lock); 2369 dum_hcd->rh_state = DUMMY_RH_SUSPENDED; 2370 set_link_state(dum_hcd); 2371 hcd->state = HC_STATE_SUSPENDED; 2372 spin_unlock_irq(&dum_hcd->dum->lock); 2373 return 0; 2374} 2375 2376static int dummy_bus_resume(struct usb_hcd *hcd) 2377{ 2378 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2379 int rc = 0; 2380 2381 dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); 2382 2383 spin_lock_irq(&dum_hcd->dum->lock); 2384 if (!HCD_HW_ACCESSIBLE(hcd)) { 2385 rc = -ESHUTDOWN; 2386 } else { 2387 dum_hcd->rh_state = DUMMY_RH_RUNNING; 2388 set_link_state(dum_hcd); 2389 if (!list_empty(&dum_hcd->urbp_list)) 2390 mod_timer(&dum_hcd->timer, jiffies); 2391 hcd->state = HC_STATE_RUNNING; 2392 } 2393 spin_unlock_irq(&dum_hcd->dum->lock); 2394 return rc; 2395} 2396 2397/*-------------------------------------------------------------------------*/ 2398 2399static inline ssize_t show_urb(char *buf, size_t size, struct urb *urb) 2400{ 2401 int ep = usb_pipeendpoint(urb->pipe); 2402 2403 return scnprintf(buf, size, 2404 "urb/%p %s ep%d%s%s len %d/%d\n", 2405 urb, 2406 ({ char *s; 2407 switch (urb->dev->speed) { 2408 case USB_SPEED_LOW: 2409 s = "ls"; 2410 break; 2411 case USB_SPEED_FULL: 2412 s = "fs"; 2413 break; 2414 case USB_SPEED_HIGH: 2415 s = "hs"; 2416 break; 2417 case USB_SPEED_SUPER: 2418 s = "ss"; 2419 break; 2420 default: 2421 s = "?"; 2422 break; 2423 } s; }), 2424 ep, ep ? (usb_urb_dir_in(urb) ? "in" : "out") : "", 2425 ({ char *s; \ 2426 switch (usb_pipetype(urb->pipe)) { \ 2427 case PIPE_CONTROL: \ 2428 s = ""; \ 2429 break; \ 2430 case PIPE_BULK: \ 2431 s = "-bulk"; \ 2432 break; \ 2433 case PIPE_INTERRUPT: \ 2434 s = "-int"; \ 2435 break; \ 2436 default: \ 2437 s = "-iso"; \ 2438 break; \ 2439 } s; }), 2440 urb->actual_length, urb->transfer_buffer_length); 2441} 2442 2443static ssize_t urbs_show(struct device *dev, struct device_attribute *attr, 2444 char *buf) 2445{ 2446 struct usb_hcd *hcd = dev_get_drvdata(dev); 2447 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2448 struct urbp *urbp; 2449 size_t size = 0; 2450 unsigned long flags; 2451 2452 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 2453 list_for_each_entry(urbp, &dum_hcd->urbp_list, urbp_list) { 2454 size_t temp; 2455 2456 temp = show_urb(buf, PAGE_SIZE - size, urbp->urb); 2457 buf += temp; 2458 size += temp; 2459 } 2460 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 2461 2462 return size; 2463} 2464static DEVICE_ATTR_RO(urbs); 2465 2466static int dummy_start_ss(struct dummy_hcd *dum_hcd) 2467{ 2468 timer_setup(&dum_hcd->timer, dummy_timer, 0); 2469 dum_hcd->rh_state = DUMMY_RH_RUNNING; 2470 dum_hcd->stream_en_ep = 0; 2471 INIT_LIST_HEAD(&dum_hcd->urbp_list); 2472 dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3; 2473 dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING; 2474 dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1; 2475#ifdef CONFIG_USB_OTG 2476 dummy_hcd_to_hcd(dum_hcd)->self.otg_port = 1; 2477#endif 2478 return 0; 2479 2480 /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */ 2481 return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs); 2482} 2483 2484static int dummy_start(struct usb_hcd *hcd) 2485{ 2486 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2487 2488 /* 2489 * HOST side init ... we emulate a root hub that'll only ever 2490 * talk to one device (the gadget side). Also appears in sysfs, 2491 * just like more familiar pci-based HCDs. 2492 */ 2493 if (!usb_hcd_is_primary_hcd(hcd)) 2494 return dummy_start_ss(dum_hcd); 2495 2496 spin_lock_init(&dum_hcd->dum->lock); 2497 timer_setup(&dum_hcd->timer, dummy_timer, 0); 2498 dum_hcd->rh_state = DUMMY_RH_RUNNING; 2499 2500 INIT_LIST_HEAD(&dum_hcd->urbp_list); 2501 2502 hcd->power_budget = POWER_BUDGET; 2503 hcd->state = HC_STATE_RUNNING; 2504 hcd->uses_new_polling = 1; 2505 2506#ifdef CONFIG_USB_OTG 2507 hcd->self.otg_port = 1; 2508#endif 2509 2510 /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */ 2511 return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs); 2512} 2513 2514static void dummy_stop(struct usb_hcd *hcd) 2515{ 2516 device_remove_file(dummy_dev(hcd_to_dummy_hcd(hcd)), &dev_attr_urbs); 2517 dev_info(dummy_dev(hcd_to_dummy_hcd(hcd)), "stopped\n"); 2518} 2519 2520/*-------------------------------------------------------------------------*/ 2521 2522static int dummy_h_get_frame(struct usb_hcd *hcd) 2523{ 2524 return dummy_g_get_frame(NULL); 2525} 2526 2527static int dummy_setup(struct usb_hcd *hcd) 2528{ 2529 struct dummy *dum; 2530 2531 dum = *((void **)dev_get_platdata(hcd->self.controller)); 2532 hcd->self.sg_tablesize = ~0; 2533 if (usb_hcd_is_primary_hcd(hcd)) { 2534 dum->hs_hcd = hcd_to_dummy_hcd(hcd); 2535 dum->hs_hcd->dum = dum; 2536 /* 2537 * Mark the first roothub as being USB 2.0. 2538 * The USB 3.0 roothub will be registered later by 2539 * dummy_hcd_probe() 2540 */ 2541 hcd->speed = HCD_USB2; 2542 hcd->self.root_hub->speed = USB_SPEED_HIGH; 2543 } else { 2544 dum->ss_hcd = hcd_to_dummy_hcd(hcd); 2545 dum->ss_hcd->dum = dum; 2546 hcd->speed = HCD_USB3; 2547 hcd->self.root_hub->speed = USB_SPEED_SUPER; 2548 } 2549 return 0; 2550} 2551 2552/* Change a group of bulk endpoints to support multiple stream IDs */ 2553static int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, 2554 struct usb_host_endpoint **eps, unsigned int num_eps, 2555 unsigned int num_streams, gfp_t mem_flags) 2556{ 2557 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2558 unsigned long flags; 2559 int max_stream; 2560 int ret_streams = num_streams; 2561 unsigned int index; 2562 unsigned int i; 2563 2564 if (!num_eps) 2565 return -EINVAL; 2566 2567 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 2568 for (i = 0; i < num_eps; i++) { 2569 index = dummy_get_ep_idx(&eps[i]->desc); 2570 if ((1 << index) & dum_hcd->stream_en_ep) { 2571 ret_streams = -EINVAL; 2572 goto out; 2573 } 2574 max_stream = usb_ss_max_streams(&eps[i]->ss_ep_comp); 2575 if (!max_stream) { 2576 ret_streams = -EINVAL; 2577 goto out; 2578 } 2579 if (max_stream < ret_streams) { 2580 dev_dbg(dummy_dev(dum_hcd), "Ep 0x%x only supports %u " 2581 "stream IDs.\n", 2582 eps[i]->desc.bEndpointAddress, 2583 max_stream); 2584 ret_streams = max_stream; 2585 } 2586 } 2587 2588 for (i = 0; i < num_eps; i++) { 2589 index = dummy_get_ep_idx(&eps[i]->desc); 2590 dum_hcd->stream_en_ep |= 1 << index; 2591 set_max_streams_for_pipe(dum_hcd, 2592 usb_endpoint_num(&eps[i]->desc), ret_streams); 2593 } 2594out: 2595 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 2596 return ret_streams; 2597} 2598 2599/* Reverts a group of bulk endpoints back to not using stream IDs. */ 2600static int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev, 2601 struct usb_host_endpoint **eps, unsigned int num_eps, 2602 gfp_t mem_flags) 2603{ 2604 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); 2605 unsigned long flags; 2606 int ret; 2607 unsigned int index; 2608 unsigned int i; 2609 2610 spin_lock_irqsave(&dum_hcd->dum->lock, flags); 2611 for (i = 0; i < num_eps; i++) { 2612 index = dummy_get_ep_idx(&eps[i]->desc); 2613 if (!((1 << index) & dum_hcd->stream_en_ep)) { 2614 ret = -EINVAL; 2615 goto out; 2616 } 2617 } 2618 2619 for (i = 0; i < num_eps; i++) { 2620 index = dummy_get_ep_idx(&eps[i]->desc); 2621 dum_hcd->stream_en_ep &= ~(1 << index); 2622 set_max_streams_for_pipe(dum_hcd, 2623 usb_endpoint_num(&eps[i]->desc), 0); 2624 } 2625 ret = 0; 2626out: 2627 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags); 2628 return ret; 2629} 2630 2631static struct hc_driver dummy_hcd = { 2632 .description = (char *) driver_name, 2633 .product_desc = "Dummy host controller", 2634 .hcd_priv_size = sizeof(struct dummy_hcd), 2635 2636 .reset = dummy_setup, 2637 .start = dummy_start, 2638 .stop = dummy_stop, 2639 2640 .urb_enqueue = dummy_urb_enqueue, 2641 .urb_dequeue = dummy_urb_dequeue, 2642 2643 .get_frame_number = dummy_h_get_frame, 2644 2645 .hub_status_data = dummy_hub_status, 2646 .hub_control = dummy_hub_control, 2647 .bus_suspend = dummy_bus_suspend, 2648 .bus_resume = dummy_bus_resume, 2649 2650 .alloc_streams = dummy_alloc_streams, 2651 .free_streams = dummy_free_streams, 2652}; 2653 2654static int dummy_hcd_probe(struct platform_device *pdev) 2655{ 2656 struct dummy *dum; 2657 struct usb_hcd *hs_hcd; 2658 struct usb_hcd *ss_hcd; 2659 int retval; 2660 2661 dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); 2662 dum = *((void **)dev_get_platdata(&pdev->dev)); 2663 2664 if (mod_data.is_super_speed) 2665 dummy_hcd.flags = HCD_USB3 | HCD_SHARED; 2666 else if (mod_data.is_high_speed) 2667 dummy_hcd.flags = HCD_USB2; 2668 else 2669 dummy_hcd.flags = HCD_USB11; 2670 hs_hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev)); 2671 if (!hs_hcd) 2672 return -ENOMEM; 2673 hs_hcd->has_tt = 1; 2674 2675 retval = usb_add_hcd(hs_hcd, 0, 0); 2676 if (retval) 2677 goto put_usb2_hcd; 2678 2679 if (mod_data.is_super_speed) { 2680 ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev, 2681 dev_name(&pdev->dev), hs_hcd); 2682 if (!ss_hcd) { 2683 retval = -ENOMEM; 2684 goto dealloc_usb2_hcd; 2685 } 2686 2687 retval = usb_add_hcd(ss_hcd, 0, 0); 2688 if (retval) 2689 goto put_usb3_hcd; 2690 } 2691 return 0; 2692 2693put_usb3_hcd: 2694 usb_put_hcd(ss_hcd); 2695dealloc_usb2_hcd: 2696 usb_remove_hcd(hs_hcd); 2697put_usb2_hcd: 2698 usb_put_hcd(hs_hcd); 2699 dum->hs_hcd = dum->ss_hcd = NULL; 2700 return retval; 2701} 2702 2703static void dummy_hcd_remove(struct platform_device *pdev) 2704{ 2705 struct dummy *dum; 2706 2707 dum = hcd_to_dummy_hcd(platform_get_drvdata(pdev))->dum; 2708 2709 if (dum->ss_hcd) { 2710 usb_remove_hcd(dummy_hcd_to_hcd(dum->ss_hcd)); 2711 usb_put_hcd(dummy_hcd_to_hcd(dum->ss_hcd)); 2712 } 2713 2714 usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd)); 2715 usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd)); 2716 2717 dum->hs_hcd = NULL; 2718 dum->ss_hcd = NULL; 2719} 2720 2721static int dummy_hcd_suspend(struct platform_device *pdev, pm_message_t state) 2722{ 2723 struct usb_hcd *hcd; 2724 struct dummy_hcd *dum_hcd; 2725 int rc = 0; 2726 2727 dev_dbg(&pdev->dev, "%s\n", __func__); 2728 2729 hcd = platform_get_drvdata(pdev); 2730 dum_hcd = hcd_to_dummy_hcd(hcd); 2731 if (dum_hcd->rh_state == DUMMY_RH_RUNNING) { 2732 dev_warn(&pdev->dev, "Root hub isn't suspended!\n"); 2733 rc = -EBUSY; 2734 } else 2735 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 2736 return rc; 2737} 2738 2739static int dummy_hcd_resume(struct platform_device *pdev) 2740{ 2741 struct usb_hcd *hcd; 2742 2743 dev_dbg(&pdev->dev, "%s\n", __func__); 2744 2745 hcd = platform_get_drvdata(pdev); 2746 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 2747 usb_hcd_poll_rh_status(hcd); 2748 return 0; 2749} 2750 2751static struct platform_driver dummy_hcd_driver = { 2752 .probe = dummy_hcd_probe, 2753 .remove_new = dummy_hcd_remove, 2754 .suspend = dummy_hcd_suspend, 2755 .resume = dummy_hcd_resume, 2756 .driver = { 2757 .name = driver_name, 2758 }, 2759}; 2760 2761/*-------------------------------------------------------------------------*/ 2762#define MAX_NUM_UDC 32 2763static struct platform_device *the_udc_pdev[MAX_NUM_UDC]; 2764static struct platform_device *the_hcd_pdev[MAX_NUM_UDC]; 2765 2766static int __init dummy_hcd_init(void) 2767{ 2768 int retval = -ENOMEM; 2769 int i; 2770 struct dummy *dum[MAX_NUM_UDC] = {}; 2771 2772 if (usb_disabled()) 2773 return -ENODEV; 2774 2775 if (!mod_data.is_high_speed && mod_data.is_super_speed) 2776 return -EINVAL; 2777 2778 if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) { 2779 pr_err("Number of emulated UDC must be in range of 1...%d\n", 2780 MAX_NUM_UDC); 2781 return -EINVAL; 2782 } 2783 2784 for (i = 0; i < mod_data.num; i++) { 2785 the_hcd_pdev[i] = platform_device_alloc(driver_name, i); 2786 if (!the_hcd_pdev[i]) { 2787 i--; 2788 while (i >= 0) 2789 platform_device_put(the_hcd_pdev[i--]); 2790 return retval; 2791 } 2792 } 2793 for (i = 0; i < mod_data.num; i++) { 2794 the_udc_pdev[i] = platform_device_alloc(gadget_name, i); 2795 if (!the_udc_pdev[i]) { 2796 i--; 2797 while (i >= 0) 2798 platform_device_put(the_udc_pdev[i--]); 2799 goto err_alloc_udc; 2800 } 2801 } 2802 for (i = 0; i < mod_data.num; i++) { 2803 dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL); 2804 if (!dum[i]) { 2805 retval = -ENOMEM; 2806 goto err_add_pdata; 2807 } 2808 retval = platform_device_add_data(the_hcd_pdev[i], &dum[i], 2809 sizeof(void *)); 2810 if (retval) 2811 goto err_add_pdata; 2812 retval = platform_device_add_data(the_udc_pdev[i], &dum[i], 2813 sizeof(void *)); 2814 if (retval) 2815 goto err_add_pdata; 2816 } 2817 2818 retval = platform_driver_register(&dummy_hcd_driver); 2819 if (retval < 0) 2820 goto err_add_pdata; 2821 retval = platform_driver_register(&dummy_udc_driver); 2822 if (retval < 0) 2823 goto err_register_udc_driver; 2824 2825 for (i = 0; i < mod_data.num; i++) { 2826 retval = platform_device_add(the_hcd_pdev[i]); 2827 if (retval < 0) { 2828 i--; 2829 while (i >= 0) 2830 platform_device_del(the_hcd_pdev[i--]); 2831 goto err_add_hcd; 2832 } 2833 } 2834 for (i = 0; i < mod_data.num; i++) { 2835 if (!dum[i]->hs_hcd || 2836 (!dum[i]->ss_hcd && mod_data.is_super_speed)) { 2837 /* 2838 * The hcd was added successfully but its probe 2839 * function failed for some reason. 2840 */ 2841 retval = -EINVAL; 2842 goto err_add_udc; 2843 } 2844 } 2845 2846 for (i = 0; i < mod_data.num; i++) { 2847 retval = platform_device_add(the_udc_pdev[i]); 2848 if (retval < 0) { 2849 i--; 2850 while (i >= 0) 2851 platform_device_del(the_udc_pdev[i--]); 2852 goto err_add_udc; 2853 } 2854 } 2855 2856 for (i = 0; i < mod_data.num; i++) { 2857 if (!platform_get_drvdata(the_udc_pdev[i])) { 2858 /* 2859 * The udc was added successfully but its probe 2860 * function failed for some reason. 2861 */ 2862 retval = -EINVAL; 2863 goto err_probe_udc; 2864 } 2865 } 2866 return retval; 2867 2868err_probe_udc: 2869 for (i = 0; i < mod_data.num; i++) 2870 platform_device_del(the_udc_pdev[i]); 2871err_add_udc: 2872 for (i = 0; i < mod_data.num; i++) 2873 platform_device_del(the_hcd_pdev[i]); 2874err_add_hcd: 2875 platform_driver_unregister(&dummy_udc_driver); 2876err_register_udc_driver: 2877 platform_driver_unregister(&dummy_hcd_driver); 2878err_add_pdata: 2879 for (i = 0; i < mod_data.num; i++) 2880 kfree(dum[i]); 2881 for (i = 0; i < mod_data.num; i++) 2882 platform_device_put(the_udc_pdev[i]); 2883err_alloc_udc: 2884 for (i = 0; i < mod_data.num; i++) 2885 platform_device_put(the_hcd_pdev[i]); 2886 return retval; 2887} 2888module_init(dummy_hcd_init); 2889 2890static void __exit dummy_hcd_cleanup(void) 2891{ 2892 int i; 2893 2894 for (i = 0; i < mod_data.num; i++) { 2895 struct dummy *dum; 2896 2897 dum = *((void **)dev_get_platdata(&the_udc_pdev[i]->dev)); 2898 2899 platform_device_unregister(the_udc_pdev[i]); 2900 platform_device_unregister(the_hcd_pdev[i]); 2901 kfree(dum); 2902 } 2903 platform_driver_unregister(&dummy_udc_driver); 2904 platform_driver_unregister(&dummy_hcd_driver); 2905} 2906module_exit(dummy_hcd_cleanup); 2907