1// SPDX-License-Identifier: GPL-2.0+ 2/****************************************************************************** 3 * speedtch.c - Alcatel SpeedTouch USB xDSL modem driver 4 * 5 * Copyright (C) 2001, Alcatel 6 * Copyright (C) 2003, Duncan Sands 7 * Copyright (C) 2004, David Woodhouse 8 * 9 * Based on "modem_run.c", copyright (C) 2001, Benoit Papillault 10 ******************************************************************************/ 11 12#include <asm/page.h> 13#include <linux/device.h> 14#include <linux/errno.h> 15#include <linux/firmware.h> 16#include <linux/kernel.h> 17#include <linux/module.h> 18#include <linux/moduleparam.h> 19#include <linux/slab.h> 20#include <linux/stat.h> 21#include <linux/timer.h> 22#include <linux/types.h> 23#include <linux/usb/ch9.h> 24#include <linux/workqueue.h> 25 26#include "usbatm.h" 27 28#define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>" 29#define DRIVER_DESC "Alcatel SpeedTouch USB driver" 30 31static const char speedtch_driver_name[] = "speedtch"; 32 33#define CTRL_TIMEOUT 2000 /* milliseconds */ 34#define DATA_TIMEOUT 2000 /* milliseconds */ 35 36#define OFFSET_7 0 /* size 1 */ 37#define OFFSET_b 1 /* size 8 */ 38#define OFFSET_d 9 /* size 4 */ 39#define OFFSET_e 13 /* size 1 */ 40#define OFFSET_f 14 /* size 1 */ 41 42#define SIZE_7 1 43#define SIZE_b 8 44#define SIZE_d 4 45#define SIZE_e 1 46#define SIZE_f 1 47 48#define MIN_POLL_DELAY 5000 /* milliseconds */ 49#define MAX_POLL_DELAY 60000 /* milliseconds */ 50 51#define RESUBMIT_DELAY 1000 /* milliseconds */ 52 53#define DEFAULT_BULK_ALTSETTING 1 54#define DEFAULT_ISOC_ALTSETTING 3 55#define DEFAULT_DL_512_FIRST 0 56#define DEFAULT_ENABLE_ISOC 0 57#define DEFAULT_SW_BUFFERING 0 58 59static unsigned int altsetting = 0; /* zero means: use the default */ 60static bool dl_512_first = DEFAULT_DL_512_FIRST; 61static bool enable_isoc = DEFAULT_ENABLE_ISOC; 62static bool sw_buffering = DEFAULT_SW_BUFFERING; 63 64#define DEFAULT_B_MAX_DSL 8128 65#define DEFAULT_MODEM_MODE 11 66#define MODEM_OPTION_LENGTH 16 67static const unsigned char DEFAULT_MODEM_OPTION[MODEM_OPTION_LENGTH] = { 68 0x10, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 69}; 70 71static unsigned int BMaxDSL = DEFAULT_B_MAX_DSL; 72static unsigned char ModemMode = DEFAULT_MODEM_MODE; 73static unsigned char ModemOption[MODEM_OPTION_LENGTH]; 74static unsigned int num_ModemOption; 75 76module_param(altsetting, uint, S_IRUGO | S_IWUSR); 77MODULE_PARM_DESC(altsetting, 78 "Alternative setting for data interface (bulk_default: " 79 __MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: " 80 __MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")"); 81 82module_param(dl_512_first, bool, S_IRUGO | S_IWUSR); 83MODULE_PARM_DESC(dl_512_first, 84 "Read 512 bytes before sending firmware (default: " 85 __MODULE_STRING(DEFAULT_DL_512_FIRST) ")"); 86 87module_param(enable_isoc, bool, S_IRUGO | S_IWUSR); 88MODULE_PARM_DESC(enable_isoc, 89 "Use isochronous transfers if available (default: " 90 __MODULE_STRING(DEFAULT_ENABLE_ISOC) ")"); 91 92module_param(sw_buffering, bool, S_IRUGO | S_IWUSR); 93MODULE_PARM_DESC(sw_buffering, 94 "Enable software buffering (default: " 95 __MODULE_STRING(DEFAULT_SW_BUFFERING) ")"); 96 97module_param(BMaxDSL, uint, S_IRUGO | S_IWUSR); 98MODULE_PARM_DESC(BMaxDSL, 99 "default: " __MODULE_STRING(DEFAULT_B_MAX_DSL)); 100 101module_param(ModemMode, byte, S_IRUGO | S_IWUSR); 102MODULE_PARM_DESC(ModemMode, 103 "default: " __MODULE_STRING(DEFAULT_MODEM_MODE)); 104 105module_param_array(ModemOption, byte, &num_ModemOption, S_IRUGO); 106MODULE_PARM_DESC(ModemOption, "default: 0x10,0x00,0x00,0x00,0x20"); 107 108#define INTERFACE_DATA 1 109#define ENDPOINT_INT 0x81 110#define ENDPOINT_BULK_DATA 0x07 111#define ENDPOINT_ISOC_DATA 0x07 112#define ENDPOINT_FIRMWARE 0x05 113 114struct speedtch_params { 115 unsigned int altsetting; 116 unsigned int BMaxDSL; 117 unsigned char ModemMode; 118 unsigned char ModemOption[MODEM_OPTION_LENGTH]; 119}; 120 121struct speedtch_instance_data { 122 struct usbatm_data *usbatm; 123 124 struct speedtch_params params; /* set in probe, constant afterwards */ 125 126 struct timer_list status_check_timer; 127 struct work_struct status_check_work; 128 129 unsigned char last_status; 130 131 int poll_delay; /* milliseconds */ 132 133 struct timer_list resubmit_timer; 134 struct urb *int_urb; 135 unsigned char int_data[16]; 136 137 unsigned char scratch_buffer[16]; 138}; 139 140/*************** 141** firmware ** 142***************/ 143 144static void speedtch_set_swbuff(struct speedtch_instance_data *instance, int state) 145{ 146 struct usbatm_data *usbatm = instance->usbatm; 147 struct usb_device *usb_dev = usbatm->usb_dev; 148 int ret; 149 150 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 151 0x32, 0x40, state ? 0x01 : 0x00, 0x00, NULL, 0, CTRL_TIMEOUT); 152 if (ret < 0) 153 usb_warn(usbatm, 154 "%sabling SW buffering: usb_control_msg returned %d\n", 155 state ? "En" : "Dis", ret); 156 else 157 usb_dbg(usbatm, "speedtch_set_swbuff: %sbled SW buffering\n", state ? "En" : "Dis"); 158} 159 160static void speedtch_test_sequence(struct speedtch_instance_data *instance) 161{ 162 struct usbatm_data *usbatm = instance->usbatm; 163 struct usb_device *usb_dev = usbatm->usb_dev; 164 unsigned char *buf = instance->scratch_buffer; 165 int ret; 166 167 /* URB 147 */ 168 buf[0] = 0x1c; 169 buf[1] = 0x50; 170 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 171 0x01, 0x40, 0x0b, 0x00, buf, 2, CTRL_TIMEOUT); 172 if (ret < 0) 173 usb_warn(usbatm, "%s failed on URB147: %d\n", __func__, ret); 174 175 /* URB 148 */ 176 buf[0] = 0x32; 177 buf[1] = 0x00; 178 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 179 0x01, 0x40, 0x02, 0x00, buf, 2, CTRL_TIMEOUT); 180 if (ret < 0) 181 usb_warn(usbatm, "%s failed on URB148: %d\n", __func__, ret); 182 183 /* URB 149 */ 184 buf[0] = 0x01; 185 buf[1] = 0x00; 186 buf[2] = 0x01; 187 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 188 0x01, 0x40, 0x03, 0x00, buf, 3, CTRL_TIMEOUT); 189 if (ret < 0) 190 usb_warn(usbatm, "%s failed on URB149: %d\n", __func__, ret); 191 192 /* URB 150 */ 193 buf[0] = 0x01; 194 buf[1] = 0x00; 195 buf[2] = 0x01; 196 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 197 0x01, 0x40, 0x04, 0x00, buf, 3, CTRL_TIMEOUT); 198 if (ret < 0) 199 usb_warn(usbatm, "%s failed on URB150: %d\n", __func__, ret); 200 201 /* Extra initialisation in recent drivers - gives higher speeds */ 202 203 /* URBext1 */ 204 buf[0] = instance->params.ModemMode; 205 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 206 0x01, 0x40, 0x11, 0x00, buf, 1, CTRL_TIMEOUT); 207 if (ret < 0) 208 usb_warn(usbatm, "%s failed on URBext1: %d\n", __func__, ret); 209 210 /* URBext2 */ 211 /* This seems to be the one which actually triggers the higher sync 212 rate -- it does require the new firmware too, although it works OK 213 with older firmware */ 214 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 215 0x01, 0x40, 0x14, 0x00, 216 instance->params.ModemOption, 217 MODEM_OPTION_LENGTH, CTRL_TIMEOUT); 218 if (ret < 0) 219 usb_warn(usbatm, "%s failed on URBext2: %d\n", __func__, ret); 220 221 /* URBext3 */ 222 buf[0] = instance->params.BMaxDSL & 0xff; 223 buf[1] = instance->params.BMaxDSL >> 8; 224 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), 225 0x01, 0x40, 0x12, 0x00, buf, 2, CTRL_TIMEOUT); 226 if (ret < 0) 227 usb_warn(usbatm, "%s failed on URBext3: %d\n", __func__, ret); 228} 229 230static int speedtch_upload_firmware(struct speedtch_instance_data *instance, 231 const struct firmware *fw1, 232 const struct firmware *fw2) 233{ 234 unsigned char *buffer; 235 struct usbatm_data *usbatm = instance->usbatm; 236 struct usb_device *usb_dev = usbatm->usb_dev; 237 int actual_length; 238 int ret = 0; 239 int offset; 240 241 usb_dbg(usbatm, "%s entered\n", __func__); 242 243 buffer = (unsigned char *)__get_free_page(GFP_KERNEL); 244 if (!buffer) { 245 ret = -ENOMEM; 246 usb_dbg(usbatm, "%s: no memory for buffer!\n", __func__); 247 goto out; 248 } 249 250 if (!usb_ifnum_to_if(usb_dev, 2)) { 251 ret = -ENODEV; 252 usb_dbg(usbatm, "%s: interface not found!\n", __func__); 253 goto out_free; 254 } 255 256 /* URB 7 */ 257 if (dl_512_first) { /* some modems need a read before writing the firmware */ 258 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE), 259 buffer, 0x200, &actual_length, 2000); 260 261 if (ret < 0 && ret != -ETIMEDOUT) 262 usb_warn(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret); 263 else 264 usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret); 265 } 266 267 /* URB 8 : both leds are static green */ 268 for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) { 269 int thislen = min_t(int, PAGE_SIZE, fw1->size - offset); 270 memcpy(buffer, fw1->data + offset, thislen); 271 272 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE), 273 buffer, thislen, &actual_length, DATA_TIMEOUT); 274 275 if (ret < 0) { 276 usb_err(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret); 277 goto out_free; 278 } 279 usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size); 280 } 281 282 /* USB led blinking green, ADSL led off */ 283 284 /* URB 11 */ 285 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE), 286 buffer, 0x200, &actual_length, DATA_TIMEOUT); 287 288 if (ret < 0) { 289 usb_err(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret); 290 goto out_free; 291 } 292 usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length); 293 294 /* URBs 12 to 139 - USB led blinking green, ADSL led off */ 295 for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) { 296 int thislen = min_t(int, PAGE_SIZE, fw2->size - offset); 297 memcpy(buffer, fw2->data + offset, thislen); 298 299 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE), 300 buffer, thislen, &actual_length, DATA_TIMEOUT); 301 302 if (ret < 0) { 303 usb_err(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret); 304 goto out_free; 305 } 306 } 307 usb_dbg(usbatm, "%s: BLOCK3 uploaded (%zu bytes)\n", __func__, fw2->size); 308 309 /* USB led static green, ADSL led static red */ 310 311 /* URB 142 */ 312 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE), 313 buffer, 0x200, &actual_length, DATA_TIMEOUT); 314 315 if (ret < 0) { 316 usb_err(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret); 317 goto out_free; 318 } 319 320 /* success */ 321 usb_dbg(usbatm, "%s: BLOCK4 downloaded (%d bytes)\n", __func__, actual_length); 322 323 /* Delay to allow firmware to start up. We can do this here 324 because we're in our own kernel thread anyway. */ 325 msleep_interruptible(1000); 326 327 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) { 328 usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->params.altsetting, ret); 329 goto out_free; 330 } 331 332 /* Enable software buffering, if requested */ 333 if (sw_buffering) 334 speedtch_set_swbuff(instance, 1); 335 336 /* Magic spell; don't ask us what this does */ 337 speedtch_test_sequence(instance); 338 339 ret = 0; 340 341out_free: 342 free_page((unsigned long)buffer); 343out: 344 return ret; 345} 346 347static int speedtch_find_firmware(struct usbatm_data *usbatm, struct usb_interface *intf, 348 int phase, const struct firmware **fw_p) 349{ 350 struct device *dev = &intf->dev; 351 const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice); 352 const u8 major_revision = bcdDevice >> 8; 353 const u8 minor_revision = bcdDevice & 0xff; 354 char buf[24]; 355 356 sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision); 357 usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf); 358 359 if (request_firmware(fw_p, buf, dev)) { 360 sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision); 361 usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf); 362 363 if (request_firmware(fw_p, buf, dev)) { 364 sprintf(buf, "speedtch-%d.bin", phase); 365 usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf); 366 367 if (request_firmware(fw_p, buf, dev)) { 368 usb_err(usbatm, "%s: no stage %d firmware found!\n", __func__, phase); 369 return -ENOENT; 370 } 371 } 372 } 373 374 usb_info(usbatm, "found stage %d firmware %s\n", phase, buf); 375 376 return 0; 377} 378 379static int speedtch_heavy_init(struct usbatm_data *usbatm, struct usb_interface *intf) 380{ 381 const struct firmware *fw1, *fw2; 382 struct speedtch_instance_data *instance = usbatm->driver_data; 383 int ret; 384 385 if ((ret = speedtch_find_firmware(usbatm, intf, 1, &fw1)) < 0) 386 return ret; 387 388 if ((ret = speedtch_find_firmware(usbatm, intf, 2, &fw2)) < 0) { 389 release_firmware(fw1); 390 return ret; 391 } 392 393 if ((ret = speedtch_upload_firmware(instance, fw1, fw2)) < 0) 394 usb_err(usbatm, "%s: firmware upload failed (%d)!\n", __func__, ret); 395 396 release_firmware(fw2); 397 release_firmware(fw1); 398 399 return ret; 400} 401 402 403/********** 404** ATM ** 405**********/ 406 407static int speedtch_read_status(struct speedtch_instance_data *instance) 408{ 409 struct usbatm_data *usbatm = instance->usbatm; 410 struct usb_device *usb_dev = usbatm->usb_dev; 411 unsigned char *buf = instance->scratch_buffer; 412 int ret; 413 414 memset(buf, 0, 16); 415 416 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 417 0x12, 0xc0, 0x07, 0x00, buf + OFFSET_7, SIZE_7, 418 CTRL_TIMEOUT); 419 if (ret < 0) { 420 atm_dbg(usbatm, "%s: MSG 7 failed\n", __func__); 421 return ret; 422 } 423 424 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 425 0x12, 0xc0, 0x0b, 0x00, buf + OFFSET_b, SIZE_b, 426 CTRL_TIMEOUT); 427 if (ret < 0) { 428 atm_dbg(usbatm, "%s: MSG B failed\n", __func__); 429 return ret; 430 } 431 432 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 433 0x12, 0xc0, 0x0d, 0x00, buf + OFFSET_d, SIZE_d, 434 CTRL_TIMEOUT); 435 if (ret < 0) { 436 atm_dbg(usbatm, "%s: MSG D failed\n", __func__); 437 return ret; 438 } 439 440 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 441 0x01, 0xc0, 0x0e, 0x00, buf + OFFSET_e, SIZE_e, 442 CTRL_TIMEOUT); 443 if (ret < 0) { 444 atm_dbg(usbatm, "%s: MSG E failed\n", __func__); 445 return ret; 446 } 447 448 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 449 0x01, 0xc0, 0x0f, 0x00, buf + OFFSET_f, SIZE_f, 450 CTRL_TIMEOUT); 451 if (ret < 0) { 452 atm_dbg(usbatm, "%s: MSG F failed\n", __func__); 453 return ret; 454 } 455 456 return 0; 457} 458 459static int speedtch_start_synchro(struct speedtch_instance_data *instance) 460{ 461 struct usbatm_data *usbatm = instance->usbatm; 462 struct usb_device *usb_dev = usbatm->usb_dev; 463 unsigned char *buf = instance->scratch_buffer; 464 int ret; 465 466 atm_dbg(usbatm, "%s entered\n", __func__); 467 468 memset(buf, 0, 2); 469 470 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 471 0x12, 0xc0, 0x04, 0x00, 472 buf, 2, CTRL_TIMEOUT); 473 474 if (ret < 0) 475 atm_warn(usbatm, "failed to start ADSL synchronisation: %d\n", ret); 476 else 477 atm_dbg(usbatm, "%s: modem prodded. %d bytes returned: %02x %02x\n", 478 __func__, ret, buf[0], buf[1]); 479 480 return ret; 481} 482 483static void speedtch_check_status(struct work_struct *work) 484{ 485 struct speedtch_instance_data *instance = 486 container_of(work, struct speedtch_instance_data, 487 status_check_work); 488 struct usbatm_data *usbatm = instance->usbatm; 489 struct atm_dev *atm_dev = usbatm->atm_dev; 490 unsigned char *buf = instance->scratch_buffer; 491 int down_speed, up_speed, ret; 492 unsigned char status; 493 494#ifdef VERBOSE_DEBUG 495 atm_dbg(usbatm, "%s entered\n", __func__); 496#endif 497 498 ret = speedtch_read_status(instance); 499 if (ret < 0) { 500 atm_warn(usbatm, "error %d fetching device status\n", ret); 501 instance->poll_delay = min(2 * instance->poll_delay, MAX_POLL_DELAY); 502 return; 503 } 504 505 instance->poll_delay = max(instance->poll_delay / 2, MIN_POLL_DELAY); 506 507 status = buf[OFFSET_7]; 508 509 if ((status != instance->last_status) || !status) { 510 atm_dbg(usbatm, "%s: line state 0x%02x\n", __func__, status); 511 512 switch (status) { 513 case 0: 514 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); 515 if (instance->last_status) 516 atm_info(usbatm, "ADSL line is down\n"); 517 /* It may never resync again unless we ask it to... */ 518 ret = speedtch_start_synchro(instance); 519 break; 520 521 case 0x08: 522 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN); 523 atm_info(usbatm, "ADSL line is blocked?\n"); 524 break; 525 526 case 0x10: 527 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); 528 atm_info(usbatm, "ADSL line is synchronising\n"); 529 break; 530 531 case 0x20: 532 down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8) 533 | (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24); 534 up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8) 535 | (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24); 536 537 if (!(down_speed & 0x0000ffff) && !(up_speed & 0x0000ffff)) { 538 down_speed >>= 16; 539 up_speed >>= 16; 540 } 541 542 atm_dev->link_rate = down_speed * 1000 / 424; 543 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND); 544 545 atm_info(usbatm, 546 "ADSL line is up (%d kb/s down | %d kb/s up)\n", 547 down_speed, up_speed); 548 break; 549 550 default: 551 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN); 552 atm_info(usbatm, "unknown line state %02x\n", status); 553 break; 554 } 555 556 instance->last_status = status; 557 } 558} 559 560static void speedtch_status_poll(struct timer_list *t) 561{ 562 struct speedtch_instance_data *instance = from_timer(instance, t, 563 status_check_timer); 564 565 schedule_work(&instance->status_check_work); 566 567 /* The following check is racy, but the race is harmless */ 568 if (instance->poll_delay < MAX_POLL_DELAY) 569 mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(instance->poll_delay)); 570 else 571 atm_warn(instance->usbatm, "Too many failures - disabling line status polling\n"); 572} 573 574static void speedtch_resubmit_int(struct timer_list *t) 575{ 576 struct speedtch_instance_data *instance = from_timer(instance, t, 577 resubmit_timer); 578 struct urb *int_urb = instance->int_urb; 579 int ret; 580 581 atm_dbg(instance->usbatm, "%s entered\n", __func__); 582 583 if (int_urb) { 584 ret = usb_submit_urb(int_urb, GFP_ATOMIC); 585 if (!ret) 586 schedule_work(&instance->status_check_work); 587 else { 588 atm_dbg(instance->usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret); 589 mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY)); 590 } 591 } 592} 593 594static void speedtch_handle_int(struct urb *int_urb) 595{ 596 struct speedtch_instance_data *instance = int_urb->context; 597 struct usbatm_data *usbatm = instance->usbatm; 598 unsigned int count = int_urb->actual_length; 599 int status = int_urb->status; 600 int ret; 601 602 /* The magic interrupt for "up state" */ 603 static const unsigned char up_int[6] = { 0xa1, 0x00, 0x01, 0x00, 0x00, 0x00 }; 604 /* The magic interrupt for "down state" */ 605 static const unsigned char down_int[6] = { 0xa1, 0x00, 0x00, 0x00, 0x00, 0x00 }; 606 607 atm_dbg(usbatm, "%s entered\n", __func__); 608 609 if (status < 0) { 610 atm_dbg(usbatm, "%s: nonzero urb status %d!\n", __func__, status); 611 goto fail; 612 } 613 614 if ((count == 6) && !memcmp(up_int, instance->int_data, 6)) { 615 del_timer(&instance->status_check_timer); 616 atm_info(usbatm, "DSL line goes up\n"); 617 } else if ((count == 6) && !memcmp(down_int, instance->int_data, 6)) { 618 atm_info(usbatm, "DSL line goes down\n"); 619 } else { 620 int i; 621 622 atm_dbg(usbatm, "%s: unknown interrupt packet of length %d:", __func__, count); 623 for (i = 0; i < count; i++) 624 printk(" %02x", instance->int_data[i]); 625 printk("\n"); 626 goto fail; 627 } 628 629 int_urb = instance->int_urb; 630 if (int_urb) { 631 ret = usb_submit_urb(int_urb, GFP_ATOMIC); 632 schedule_work(&instance->status_check_work); 633 if (ret < 0) { 634 atm_dbg(usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret); 635 goto fail; 636 } 637 } 638 639 return; 640 641fail: 642 int_urb = instance->int_urb; 643 if (int_urb) 644 mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY)); 645} 646 647static int speedtch_atm_start(struct usbatm_data *usbatm, struct atm_dev *atm_dev) 648{ 649 struct usb_device *usb_dev = usbatm->usb_dev; 650 struct speedtch_instance_data *instance = usbatm->driver_data; 651 int i, ret; 652 unsigned char mac_str[13]; 653 654 atm_dbg(usbatm, "%s entered\n", __func__); 655 656 /* Set MAC address, it is stored in the serial number */ 657 memset(atm_dev->esi, 0, sizeof(atm_dev->esi)); 658 if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) { 659 for (i = 0; i < 6; i++) 660 atm_dev->esi[i] = (hex_to_bin(mac_str[i * 2]) << 4) + 661 hex_to_bin(mac_str[i * 2 + 1]); 662 } 663 664 /* Start modem synchronisation */ 665 ret = speedtch_start_synchro(instance); 666 667 /* Set up interrupt endpoint */ 668 if (instance->int_urb) { 669 ret = usb_submit_urb(instance->int_urb, GFP_KERNEL); 670 if (ret < 0) { 671 /* Doesn't matter; we'll poll anyway */ 672 atm_dbg(usbatm, "%s: submission of interrupt URB failed (%d)!\n", __func__, ret); 673 usb_free_urb(instance->int_urb); 674 instance->int_urb = NULL; 675 } 676 } 677 678 /* Start status polling */ 679 mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(1000)); 680 681 return 0; 682} 683 684static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_dev) 685{ 686 struct speedtch_instance_data *instance = usbatm->driver_data; 687 struct urb *int_urb = instance->int_urb; 688 689 atm_dbg(usbatm, "%s entered\n", __func__); 690 691 del_timer_sync(&instance->status_check_timer); 692 693 /* 694 * Since resubmit_timer and int_urb can schedule themselves and 695 * each other, shutting them down correctly takes some care 696 */ 697 instance->int_urb = NULL; /* signal shutdown */ 698 mb(); 699 usb_kill_urb(int_urb); 700 del_timer_sync(&instance->resubmit_timer); 701 /* 702 * At this point, speedtch_handle_int and speedtch_resubmit_int 703 * can run or be running, but instance->int_urb == NULL means that 704 * they will not reschedule 705 */ 706 usb_kill_urb(int_urb); 707 del_timer_sync(&instance->resubmit_timer); 708 usb_free_urb(int_urb); 709 710 flush_work(&instance->status_check_work); 711} 712 713static int speedtch_pre_reset(struct usb_interface *intf) 714{ 715 return 0; 716} 717 718static int speedtch_post_reset(struct usb_interface *intf) 719{ 720 return 0; 721} 722 723 724/********** 725** USB ** 726**********/ 727 728static const struct usb_device_id speedtch_usb_ids[] = { 729 {USB_DEVICE(0x06b9, 0x4061)}, 730 {} 731}; 732 733MODULE_DEVICE_TABLE(usb, speedtch_usb_ids); 734 735static int speedtch_usb_probe(struct usb_interface *, const struct usb_device_id *); 736 737static struct usb_driver speedtch_usb_driver = { 738 .name = speedtch_driver_name, 739 .probe = speedtch_usb_probe, 740 .disconnect = usbatm_usb_disconnect, 741 .pre_reset = speedtch_pre_reset, 742 .post_reset = speedtch_post_reset, 743 .id_table = speedtch_usb_ids 744}; 745 746static void speedtch_release_interfaces(struct usb_device *usb_dev, 747 int num_interfaces) 748{ 749 struct usb_interface *cur_intf; 750 int i; 751 752 for (i = 0; i < num_interfaces; i++) { 753 cur_intf = usb_ifnum_to_if(usb_dev, i); 754 if (cur_intf) { 755 usb_set_intfdata(cur_intf, NULL); 756 usb_driver_release_interface(&speedtch_usb_driver, cur_intf); 757 } 758 } 759} 760 761static int speedtch_bind(struct usbatm_data *usbatm, 762 struct usb_interface *intf, 763 const struct usb_device_id *id) 764{ 765 struct usb_device *usb_dev = interface_to_usbdev(intf); 766 struct usb_interface *cur_intf, *data_intf; 767 struct speedtch_instance_data *instance; 768 int ifnum = intf->altsetting->desc.bInterfaceNumber; 769 int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces; 770 int i, ret; 771 int use_isoc; 772 773 usb_dbg(usbatm, "%s entered\n", __func__); 774 775 /* sanity checks */ 776 777 if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) { 778 usb_err(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass); 779 return -ENODEV; 780 } 781 782 data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA); 783 if (!data_intf) { 784 usb_err(usbatm, "%s: data interface not found!\n", __func__); 785 return -ENODEV; 786 } 787 788 /* claim all interfaces */ 789 790 for (i = 0; i < num_interfaces; i++) { 791 cur_intf = usb_ifnum_to_if(usb_dev, i); 792 793 if ((i != ifnum) && cur_intf) { 794 ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm); 795 796 if (ret < 0) { 797 usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, i, ret); 798 speedtch_release_interfaces(usb_dev, i); 799 return ret; 800 } 801 } 802 } 803 804 instance = kzalloc(sizeof(*instance), GFP_KERNEL); 805 806 if (!instance) { 807 ret = -ENOMEM; 808 goto fail_release; 809 } 810 811 instance->usbatm = usbatm; 812 813 /* module parameters may change at any moment, so take a snapshot */ 814 instance->params.altsetting = altsetting; 815 instance->params.BMaxDSL = BMaxDSL; 816 instance->params.ModemMode = ModemMode; 817 memcpy(instance->params.ModemOption, DEFAULT_MODEM_OPTION, MODEM_OPTION_LENGTH); 818 memcpy(instance->params.ModemOption, ModemOption, num_ModemOption); 819 use_isoc = enable_isoc; 820 821 if (instance->params.altsetting) 822 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) { 823 usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->params.altsetting, ret); 824 instance->params.altsetting = 0; /* fall back to default */ 825 } 826 827 if (!instance->params.altsetting && use_isoc) 828 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) { 829 usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret); 830 use_isoc = 0; /* fall back to bulk */ 831 } 832 833 if (use_isoc) { 834 const struct usb_host_interface *desc = data_intf->cur_altsetting; 835 const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in; 836 837 use_isoc = 0; /* fall back to bulk if endpoint not found */ 838 839 for (i = 0; i < desc->desc.bNumEndpoints; i++) { 840 const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc; 841 842 if ((endpoint_desc->bEndpointAddress == target_address)) { 843 use_isoc = 844 usb_endpoint_xfer_isoc(endpoint_desc); 845 break; 846 } 847 } 848 849 if (!use_isoc) 850 usb_info(usbatm, "isochronous transfer not supported - using bulk\n"); 851 } 852 853 if (!use_isoc && !instance->params.altsetting) 854 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) { 855 usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret); 856 goto fail_free; 857 } 858 859 if (!instance->params.altsetting) 860 instance->params.altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING; 861 862 usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0); 863 864 INIT_WORK(&instance->status_check_work, speedtch_check_status); 865 timer_setup(&instance->status_check_timer, speedtch_status_poll, 0); 866 instance->last_status = 0xff; 867 instance->poll_delay = MIN_POLL_DELAY; 868 869 timer_setup(&instance->resubmit_timer, speedtch_resubmit_int, 0); 870 871 instance->int_urb = usb_alloc_urb(0, GFP_KERNEL); 872 873 if (instance->int_urb) 874 usb_fill_int_urb(instance->int_urb, usb_dev, 875 usb_rcvintpipe(usb_dev, ENDPOINT_INT), 876 instance->int_data, sizeof(instance->int_data), 877 speedtch_handle_int, instance, 16); 878 else 879 usb_dbg(usbatm, "%s: no memory for interrupt urb!\n", __func__); 880 881 /* check whether the modem already seems to be alive */ 882 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 883 0x12, 0xc0, 0x07, 0x00, 884 instance->scratch_buffer + OFFSET_7, SIZE_7, 500); 885 886 usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0); 887 888 usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not"); 889 890 if (!(usbatm->flags & UDSL_SKIP_HEAVY_INIT)) 891 if ((ret = usb_reset_device(usb_dev)) < 0) { 892 usb_err(usbatm, "%s: device reset failed (%d)!\n", __func__, ret); 893 goto fail_free; 894 } 895 896 usbatm->driver_data = instance; 897 898 return 0; 899 900fail_free: 901 usb_free_urb(instance->int_urb); 902 kfree(instance); 903fail_release: 904 speedtch_release_interfaces(usb_dev, num_interfaces); 905 return ret; 906} 907 908static void speedtch_unbind(struct usbatm_data *usbatm, struct usb_interface *intf) 909{ 910 struct usb_device *usb_dev = interface_to_usbdev(intf); 911 struct speedtch_instance_data *instance = usbatm->driver_data; 912 913 usb_dbg(usbatm, "%s entered\n", __func__); 914 915 speedtch_release_interfaces(usb_dev, usb_dev->actconfig->desc.bNumInterfaces); 916 usb_free_urb(instance->int_urb); 917 kfree(instance); 918} 919 920 921/*********** 922** init ** 923***********/ 924 925static struct usbatm_driver speedtch_usbatm_driver = { 926 .driver_name = speedtch_driver_name, 927 .bind = speedtch_bind, 928 .heavy_init = speedtch_heavy_init, 929 .unbind = speedtch_unbind, 930 .atm_start = speedtch_atm_start, 931 .atm_stop = speedtch_atm_stop, 932 .bulk_in = ENDPOINT_BULK_DATA, 933 .bulk_out = ENDPOINT_BULK_DATA, 934 .isoc_in = ENDPOINT_ISOC_DATA 935}; 936 937static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) 938{ 939 return usbatm_usb_probe(intf, id, &speedtch_usbatm_driver); 940} 941 942module_usb_driver(speedtch_usb_driver); 943 944MODULE_AUTHOR(DRIVER_AUTHOR); 945MODULE_DESCRIPTION(DRIVER_DESC); 946MODULE_LICENSE("GPL"); 947