1// SPDX-License-Identifier: GPL-2.0 2// Copyright (C) 2018 Spreadtrum Communications Inc. 3 4#include <linux/clk.h> 5#include <linux/dmaengine.h> 6#include <linux/dma-mapping.h> 7#include <linux/dma/sprd-dma.h> 8#include <linux/interrupt.h> 9#include <linux/io.h> 10#include <linux/iopoll.h> 11#include <linux/kernel.h> 12#include <linux/module.h> 13#include <linux/of.h> 14#include <linux/of_dma.h> 15#include <linux/platform_device.h> 16#include <linux/pm_runtime.h> 17#include <linux/spi/spi.h> 18 19#define SPRD_SPI_TXD 0x0 20#define SPRD_SPI_CLKD 0x4 21#define SPRD_SPI_CTL0 0x8 22#define SPRD_SPI_CTL1 0xc 23#define SPRD_SPI_CTL2 0x10 24#define SPRD_SPI_CTL3 0x14 25#define SPRD_SPI_CTL4 0x18 26#define SPRD_SPI_CTL5 0x1c 27#define SPRD_SPI_INT_EN 0x20 28#define SPRD_SPI_INT_CLR 0x24 29#define SPRD_SPI_INT_RAW_STS 0x28 30#define SPRD_SPI_INT_MASK_STS 0x2c 31#define SPRD_SPI_STS1 0x30 32#define SPRD_SPI_STS2 0x34 33#define SPRD_SPI_DSP_WAIT 0x38 34#define SPRD_SPI_STS3 0x3c 35#define SPRD_SPI_CTL6 0x40 36#define SPRD_SPI_STS4 0x44 37#define SPRD_SPI_FIFO_RST 0x48 38#define SPRD_SPI_CTL7 0x4c 39#define SPRD_SPI_STS5 0x50 40#define SPRD_SPI_CTL8 0x54 41#define SPRD_SPI_CTL9 0x58 42#define SPRD_SPI_CTL10 0x5c 43#define SPRD_SPI_CTL11 0x60 44#define SPRD_SPI_CTL12 0x64 45#define SPRD_SPI_STS6 0x68 46#define SPRD_SPI_STS7 0x6c 47#define SPRD_SPI_STS8 0x70 48#define SPRD_SPI_STS9 0x74 49 50/* Bits & mask definition for register CTL0 */ 51#define SPRD_SPI_SCK_REV BIT(13) 52#define SPRD_SPI_NG_TX BIT(1) 53#define SPRD_SPI_NG_RX BIT(0) 54#define SPRD_SPI_CHNL_LEN_MASK GENMASK(4, 0) 55#define SPRD_SPI_CSN_MASK GENMASK(11, 8) 56#define SPRD_SPI_CS0_VALID BIT(8) 57 58/* Bits & mask definition for register SPI_INT_EN */ 59#define SPRD_SPI_TX_END_INT_EN BIT(8) 60#define SPRD_SPI_RX_END_INT_EN BIT(9) 61 62/* Bits & mask definition for register SPI_INT_RAW_STS */ 63#define SPRD_SPI_TX_END_RAW BIT(8) 64#define SPRD_SPI_RX_END_RAW BIT(9) 65 66/* Bits & mask definition for register SPI_INT_CLR */ 67#define SPRD_SPI_TX_END_CLR BIT(8) 68#define SPRD_SPI_RX_END_CLR BIT(9) 69 70/* Bits & mask definition for register INT_MASK_STS */ 71#define SPRD_SPI_MASK_RX_END BIT(9) 72#define SPRD_SPI_MASK_TX_END BIT(8) 73 74/* Bits & mask definition for register STS2 */ 75#define SPRD_SPI_TX_BUSY BIT(8) 76 77/* Bits & mask definition for register CTL1 */ 78#define SPRD_SPI_RX_MODE BIT(12) 79#define SPRD_SPI_TX_MODE BIT(13) 80#define SPRD_SPI_RTX_MD_MASK GENMASK(13, 12) 81 82/* Bits & mask definition for register CTL2 */ 83#define SPRD_SPI_DMA_EN BIT(6) 84 85/* Bits & mask definition for register CTL4 */ 86#define SPRD_SPI_START_RX BIT(9) 87#define SPRD_SPI_ONLY_RECV_MASK GENMASK(8, 0) 88 89/* Bits & mask definition for register SPI_INT_CLR */ 90#define SPRD_SPI_RX_END_INT_CLR BIT(9) 91#define SPRD_SPI_TX_END_INT_CLR BIT(8) 92 93/* Bits & mask definition for register SPI_INT_RAW */ 94#define SPRD_SPI_RX_END_IRQ BIT(9) 95#define SPRD_SPI_TX_END_IRQ BIT(8) 96 97/* Bits & mask definition for register CTL12 */ 98#define SPRD_SPI_SW_RX_REQ BIT(0) 99#define SPRD_SPI_SW_TX_REQ BIT(1) 100 101/* Bits & mask definition for register CTL7 */ 102#define SPRD_SPI_DATA_LINE2_EN BIT(15) 103#define SPRD_SPI_MODE_MASK GENMASK(5, 3) 104#define SPRD_SPI_MODE_OFFSET 3 105#define SPRD_SPI_3WIRE_MODE 4 106#define SPRD_SPI_4WIRE_MODE 0 107 108/* Bits & mask definition for register CTL8 */ 109#define SPRD_SPI_TX_MAX_LEN_MASK GENMASK(19, 0) 110#define SPRD_SPI_TX_LEN_H_MASK GENMASK(3, 0) 111#define SPRD_SPI_TX_LEN_H_OFFSET 16 112 113/* Bits & mask definition for register CTL9 */ 114#define SPRD_SPI_TX_LEN_L_MASK GENMASK(15, 0) 115 116/* Bits & mask definition for register CTL10 */ 117#define SPRD_SPI_RX_MAX_LEN_MASK GENMASK(19, 0) 118#define SPRD_SPI_RX_LEN_H_MASK GENMASK(3, 0) 119#define SPRD_SPI_RX_LEN_H_OFFSET 16 120 121/* Bits & mask definition for register CTL11 */ 122#define SPRD_SPI_RX_LEN_L_MASK GENMASK(15, 0) 123 124/* Default & maximum word delay cycles */ 125#define SPRD_SPI_MIN_DELAY_CYCLE 14 126#define SPRD_SPI_MAX_DELAY_CYCLE 130 127 128#define SPRD_SPI_FIFO_SIZE 32 129#define SPRD_SPI_CHIP_CS_NUM 0x4 130#define SPRD_SPI_CHNL_LEN 2 131#define SPRD_SPI_DEFAULT_SOURCE 26000000 132#define SPRD_SPI_MAX_SPEED_HZ 48000000 133#define SPRD_SPI_AUTOSUSPEND_DELAY 100 134#define SPRD_SPI_DMA_STEP 8 135 136enum sprd_spi_dma_channel { 137 SPRD_SPI_RX, 138 SPRD_SPI_TX, 139 SPRD_SPI_MAX, 140}; 141 142struct sprd_spi_dma { 143 bool enable; 144 struct dma_chan *dma_chan[SPRD_SPI_MAX]; 145 enum dma_slave_buswidth width; 146 u32 fragmens_len; 147 u32 rx_len; 148}; 149 150struct sprd_spi { 151 void __iomem *base; 152 phys_addr_t phy_base; 153 struct device *dev; 154 struct clk *clk; 155 int irq; 156 u32 src_clk; 157 u32 hw_mode; 158 u32 trans_len; 159 u32 trans_mode; 160 u32 word_delay; 161 u32 hw_speed_hz; 162 u32 len; 163 int status; 164 struct sprd_spi_dma dma; 165 struct completion xfer_completion; 166 const void *tx_buf; 167 void *rx_buf; 168 int (*read_bufs)(struct sprd_spi *ss, u32 len); 169 int (*write_bufs)(struct sprd_spi *ss, u32 len); 170}; 171 172static u32 sprd_spi_transfer_max_timeout(struct sprd_spi *ss, 173 struct spi_transfer *t) 174{ 175 /* 176 * The time spent on transmission of the full FIFO data is the maximum 177 * SPI transmission time. 178 */ 179 u32 size = t->bits_per_word * SPRD_SPI_FIFO_SIZE; 180 u32 bit_time_us = DIV_ROUND_UP(USEC_PER_SEC, ss->hw_speed_hz); 181 u32 total_time_us = size * bit_time_us; 182 /* 183 * There is an interval between data and the data in our SPI hardware, 184 * so the total transmission time need add the interval time. 185 */ 186 u32 interval_cycle = SPRD_SPI_FIFO_SIZE * ss->word_delay; 187 u32 interval_time_us = DIV_ROUND_UP(interval_cycle * USEC_PER_SEC, 188 ss->src_clk); 189 190 return total_time_us + interval_time_us; 191} 192 193static int sprd_spi_wait_for_tx_end(struct sprd_spi *ss, struct spi_transfer *t) 194{ 195 u32 val, us; 196 int ret; 197 198 us = sprd_spi_transfer_max_timeout(ss, t); 199 ret = readl_relaxed_poll_timeout(ss->base + SPRD_SPI_INT_RAW_STS, val, 200 val & SPRD_SPI_TX_END_IRQ, 0, us); 201 if (ret) { 202 dev_err(ss->dev, "SPI error, spi send timeout!\n"); 203 return ret; 204 } 205 206 ret = readl_relaxed_poll_timeout(ss->base + SPRD_SPI_STS2, val, 207 !(val & SPRD_SPI_TX_BUSY), 0, us); 208 if (ret) { 209 dev_err(ss->dev, "SPI error, spi busy timeout!\n"); 210 return ret; 211 } 212 213 writel_relaxed(SPRD_SPI_TX_END_INT_CLR, ss->base + SPRD_SPI_INT_CLR); 214 215 return 0; 216} 217 218static int sprd_spi_wait_for_rx_end(struct sprd_spi *ss, struct spi_transfer *t) 219{ 220 u32 val, us; 221 int ret; 222 223 us = sprd_spi_transfer_max_timeout(ss, t); 224 ret = readl_relaxed_poll_timeout(ss->base + SPRD_SPI_INT_RAW_STS, val, 225 val & SPRD_SPI_RX_END_IRQ, 0, us); 226 if (ret) { 227 dev_err(ss->dev, "SPI error, spi rx timeout!\n"); 228 return ret; 229 } 230 231 writel_relaxed(SPRD_SPI_RX_END_INT_CLR, ss->base + SPRD_SPI_INT_CLR); 232 233 return 0; 234} 235 236static void sprd_spi_tx_req(struct sprd_spi *ss) 237{ 238 writel_relaxed(SPRD_SPI_SW_TX_REQ, ss->base + SPRD_SPI_CTL12); 239} 240 241static void sprd_spi_rx_req(struct sprd_spi *ss) 242{ 243 writel_relaxed(SPRD_SPI_SW_RX_REQ, ss->base + SPRD_SPI_CTL12); 244} 245 246static void sprd_spi_enter_idle(struct sprd_spi *ss) 247{ 248 u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL1); 249 250 val &= ~SPRD_SPI_RTX_MD_MASK; 251 writel_relaxed(val, ss->base + SPRD_SPI_CTL1); 252} 253 254static void sprd_spi_set_transfer_bits(struct sprd_spi *ss, u32 bits) 255{ 256 u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL0); 257 258 /* Set the valid bits for every transaction */ 259 val &= ~(SPRD_SPI_CHNL_LEN_MASK << SPRD_SPI_CHNL_LEN); 260 val |= bits << SPRD_SPI_CHNL_LEN; 261 writel_relaxed(val, ss->base + SPRD_SPI_CTL0); 262} 263 264static void sprd_spi_set_tx_length(struct sprd_spi *ss, u32 length) 265{ 266 u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL8); 267 268 length &= SPRD_SPI_TX_MAX_LEN_MASK; 269 val &= ~SPRD_SPI_TX_LEN_H_MASK; 270 val |= length >> SPRD_SPI_TX_LEN_H_OFFSET; 271 writel_relaxed(val, ss->base + SPRD_SPI_CTL8); 272 273 val = length & SPRD_SPI_TX_LEN_L_MASK; 274 writel_relaxed(val, ss->base + SPRD_SPI_CTL9); 275} 276 277static void sprd_spi_set_rx_length(struct sprd_spi *ss, u32 length) 278{ 279 u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL10); 280 281 length &= SPRD_SPI_RX_MAX_LEN_MASK; 282 val &= ~SPRD_SPI_RX_LEN_H_MASK; 283 val |= length >> SPRD_SPI_RX_LEN_H_OFFSET; 284 writel_relaxed(val, ss->base + SPRD_SPI_CTL10); 285 286 val = length & SPRD_SPI_RX_LEN_L_MASK; 287 writel_relaxed(val, ss->base + SPRD_SPI_CTL11); 288} 289 290static void sprd_spi_chipselect(struct spi_device *sdev, bool cs) 291{ 292 struct spi_controller *sctlr = sdev->controller; 293 struct sprd_spi *ss = spi_controller_get_devdata(sctlr); 294 u32 val; 295 296 val = readl_relaxed(ss->base + SPRD_SPI_CTL0); 297 /* The SPI controller will pull down CS pin if cs is 0 */ 298 if (!cs) { 299 val &= ~SPRD_SPI_CS0_VALID; 300 writel_relaxed(val, ss->base + SPRD_SPI_CTL0); 301 } else { 302 val |= SPRD_SPI_CSN_MASK; 303 writel_relaxed(val, ss->base + SPRD_SPI_CTL0); 304 } 305} 306 307static int sprd_spi_write_only_receive(struct sprd_spi *ss, u32 len) 308{ 309 u32 val; 310 311 /* Clear the start receive bit and reset receive data number */ 312 val = readl_relaxed(ss->base + SPRD_SPI_CTL4); 313 val &= ~(SPRD_SPI_START_RX | SPRD_SPI_ONLY_RECV_MASK); 314 writel_relaxed(val, ss->base + SPRD_SPI_CTL4); 315 316 /* Set the receive data length */ 317 val = readl_relaxed(ss->base + SPRD_SPI_CTL4); 318 val |= len & SPRD_SPI_ONLY_RECV_MASK; 319 writel_relaxed(val, ss->base + SPRD_SPI_CTL4); 320 321 /* Trigger to receive data */ 322 val = readl_relaxed(ss->base + SPRD_SPI_CTL4); 323 val |= SPRD_SPI_START_RX; 324 writel_relaxed(val, ss->base + SPRD_SPI_CTL4); 325 326 return len; 327} 328 329static int sprd_spi_write_bufs_u8(struct sprd_spi *ss, u32 len) 330{ 331 u8 *tx_p = (u8 *)ss->tx_buf; 332 int i; 333 334 for (i = 0; i < len; i++) 335 writeb_relaxed(tx_p[i], ss->base + SPRD_SPI_TXD); 336 337 ss->tx_buf += i; 338 return i; 339} 340 341static int sprd_spi_write_bufs_u16(struct sprd_spi *ss, u32 len) 342{ 343 u16 *tx_p = (u16 *)ss->tx_buf; 344 int i; 345 346 for (i = 0; i < len; i++) 347 writew_relaxed(tx_p[i], ss->base + SPRD_SPI_TXD); 348 349 ss->tx_buf += i << 1; 350 return i << 1; 351} 352 353static int sprd_spi_write_bufs_u32(struct sprd_spi *ss, u32 len) 354{ 355 u32 *tx_p = (u32 *)ss->tx_buf; 356 int i; 357 358 for (i = 0; i < len; i++) 359 writel_relaxed(tx_p[i], ss->base + SPRD_SPI_TXD); 360 361 ss->tx_buf += i << 2; 362 return i << 2; 363} 364 365static int sprd_spi_read_bufs_u8(struct sprd_spi *ss, u32 len) 366{ 367 u8 *rx_p = (u8 *)ss->rx_buf; 368 int i; 369 370 for (i = 0; i < len; i++) 371 rx_p[i] = readb_relaxed(ss->base + SPRD_SPI_TXD); 372 373 ss->rx_buf += i; 374 return i; 375} 376 377static int sprd_spi_read_bufs_u16(struct sprd_spi *ss, u32 len) 378{ 379 u16 *rx_p = (u16 *)ss->rx_buf; 380 int i; 381 382 for (i = 0; i < len; i++) 383 rx_p[i] = readw_relaxed(ss->base + SPRD_SPI_TXD); 384 385 ss->rx_buf += i << 1; 386 return i << 1; 387} 388 389static int sprd_spi_read_bufs_u32(struct sprd_spi *ss, u32 len) 390{ 391 u32 *rx_p = (u32 *)ss->rx_buf; 392 int i; 393 394 for (i = 0; i < len; i++) 395 rx_p[i] = readl_relaxed(ss->base + SPRD_SPI_TXD); 396 397 ss->rx_buf += i << 2; 398 return i << 2; 399} 400 401static int sprd_spi_txrx_bufs(struct spi_device *sdev, struct spi_transfer *t) 402{ 403 struct sprd_spi *ss = spi_controller_get_devdata(sdev->controller); 404 u32 trans_len = ss->trans_len, len; 405 int ret, write_size = 0, read_size = 0; 406 407 while (trans_len) { 408 len = trans_len > SPRD_SPI_FIFO_SIZE ? SPRD_SPI_FIFO_SIZE : 409 trans_len; 410 if (ss->trans_mode & SPRD_SPI_TX_MODE) { 411 sprd_spi_set_tx_length(ss, len); 412 write_size += ss->write_bufs(ss, len); 413 414 /* 415 * For our 3 wires mode or dual TX line mode, we need 416 * to request the controller to transfer. 417 */ 418 if (ss->hw_mode & SPI_3WIRE || ss->hw_mode & SPI_TX_DUAL) 419 sprd_spi_tx_req(ss); 420 421 ret = sprd_spi_wait_for_tx_end(ss, t); 422 } else { 423 sprd_spi_set_rx_length(ss, len); 424 425 /* 426 * For our 3 wires mode or dual TX line mode, we need 427 * to request the controller to read. 428 */ 429 if (ss->hw_mode & SPI_3WIRE || ss->hw_mode & SPI_TX_DUAL) 430 sprd_spi_rx_req(ss); 431 else 432 write_size += ss->write_bufs(ss, len); 433 434 ret = sprd_spi_wait_for_rx_end(ss, t); 435 } 436 437 if (ret) 438 goto complete; 439 440 if (ss->trans_mode & SPRD_SPI_RX_MODE) 441 read_size += ss->read_bufs(ss, len); 442 443 trans_len -= len; 444 } 445 446 if (ss->trans_mode & SPRD_SPI_TX_MODE) 447 ret = write_size; 448 else 449 ret = read_size; 450complete: 451 sprd_spi_enter_idle(ss); 452 453 return ret; 454} 455 456static void sprd_spi_irq_enable(struct sprd_spi *ss) 457{ 458 u32 val; 459 460 /* Clear interrupt status before enabling interrupt. */ 461 writel_relaxed(SPRD_SPI_TX_END_CLR | SPRD_SPI_RX_END_CLR, 462 ss->base + SPRD_SPI_INT_CLR); 463 /* Enable SPI interrupt only in DMA mode. */ 464 val = readl_relaxed(ss->base + SPRD_SPI_INT_EN); 465 writel_relaxed(val | SPRD_SPI_TX_END_INT_EN | 466 SPRD_SPI_RX_END_INT_EN, 467 ss->base + SPRD_SPI_INT_EN); 468} 469 470static void sprd_spi_irq_disable(struct sprd_spi *ss) 471{ 472 writel_relaxed(0, ss->base + SPRD_SPI_INT_EN); 473} 474 475static void sprd_spi_dma_enable(struct sprd_spi *ss, bool enable) 476{ 477 u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL2); 478 479 if (enable) 480 val |= SPRD_SPI_DMA_EN; 481 else 482 val &= ~SPRD_SPI_DMA_EN; 483 484 writel_relaxed(val, ss->base + SPRD_SPI_CTL2); 485} 486 487static int sprd_spi_dma_submit(struct dma_chan *dma_chan, 488 struct dma_slave_config *c, 489 struct sg_table *sg, 490 enum dma_transfer_direction dir) 491{ 492 struct dma_async_tx_descriptor *desc; 493 dma_cookie_t cookie; 494 unsigned long flags; 495 int ret; 496 497 ret = dmaengine_slave_config(dma_chan, c); 498 if (ret < 0) 499 return ret; 500 501 flags = SPRD_DMA_FLAGS(SPRD_DMA_CHN_MODE_NONE, SPRD_DMA_NO_TRG, 502 SPRD_DMA_FRAG_REQ, SPRD_DMA_TRANS_INT); 503 desc = dmaengine_prep_slave_sg(dma_chan, sg->sgl, sg->nents, dir, flags); 504 if (!desc) 505 return -ENODEV; 506 507 cookie = dmaengine_submit(desc); 508 if (dma_submit_error(cookie)) 509 return dma_submit_error(cookie); 510 511 dma_async_issue_pending(dma_chan); 512 513 return 0; 514} 515 516static int sprd_spi_dma_rx_config(struct sprd_spi *ss, struct spi_transfer *t) 517{ 518 struct dma_chan *dma_chan = ss->dma.dma_chan[SPRD_SPI_RX]; 519 struct dma_slave_config config = { 520 .src_addr = ss->phy_base, 521 .src_addr_width = ss->dma.width, 522 .dst_addr_width = ss->dma.width, 523 .dst_maxburst = ss->dma.fragmens_len, 524 }; 525 int ret; 526 527 ret = sprd_spi_dma_submit(dma_chan, &config, &t->rx_sg, DMA_DEV_TO_MEM); 528 if (ret) 529 return ret; 530 531 return ss->dma.rx_len; 532} 533 534static int sprd_spi_dma_tx_config(struct sprd_spi *ss, struct spi_transfer *t) 535{ 536 struct dma_chan *dma_chan = ss->dma.dma_chan[SPRD_SPI_TX]; 537 struct dma_slave_config config = { 538 .dst_addr = ss->phy_base, 539 .src_addr_width = ss->dma.width, 540 .dst_addr_width = ss->dma.width, 541 .src_maxburst = ss->dma.fragmens_len, 542 }; 543 int ret; 544 545 ret = sprd_spi_dma_submit(dma_chan, &config, &t->tx_sg, DMA_MEM_TO_DEV); 546 if (ret) 547 return ret; 548 549 return t->len; 550} 551 552static int sprd_spi_dma_request(struct sprd_spi *ss) 553{ 554 ss->dma.dma_chan[SPRD_SPI_RX] = dma_request_chan(ss->dev, "rx_chn"); 555 if (IS_ERR_OR_NULL(ss->dma.dma_chan[SPRD_SPI_RX])) 556 return dev_err_probe(ss->dev, PTR_ERR(ss->dma.dma_chan[SPRD_SPI_RX]), 557 "request RX DMA channel failed!\n"); 558 559 ss->dma.dma_chan[SPRD_SPI_TX] = dma_request_chan(ss->dev, "tx_chn"); 560 if (IS_ERR_OR_NULL(ss->dma.dma_chan[SPRD_SPI_TX])) { 561 dma_release_channel(ss->dma.dma_chan[SPRD_SPI_RX]); 562 return dev_err_probe(ss->dev, PTR_ERR(ss->dma.dma_chan[SPRD_SPI_TX]), 563 "request TX DMA channel failed!\n"); 564 } 565 566 return 0; 567} 568 569static void sprd_spi_dma_release(struct sprd_spi *ss) 570{ 571 if (ss->dma.dma_chan[SPRD_SPI_RX]) 572 dma_release_channel(ss->dma.dma_chan[SPRD_SPI_RX]); 573 574 if (ss->dma.dma_chan[SPRD_SPI_TX]) 575 dma_release_channel(ss->dma.dma_chan[SPRD_SPI_TX]); 576} 577 578static int sprd_spi_dma_txrx_bufs(struct spi_device *sdev, 579 struct spi_transfer *t) 580{ 581 struct sprd_spi *ss = spi_controller_get_devdata(sdev->controller); 582 u32 trans_len = ss->trans_len; 583 int ret, write_size = 0; 584 585 reinit_completion(&ss->xfer_completion); 586 sprd_spi_irq_enable(ss); 587 if (ss->trans_mode & SPRD_SPI_TX_MODE) { 588 write_size = sprd_spi_dma_tx_config(ss, t); 589 sprd_spi_set_tx_length(ss, trans_len); 590 591 /* 592 * For our 3 wires mode or dual TX line mode, we need 593 * to request the controller to transfer. 594 */ 595 if (ss->hw_mode & SPI_3WIRE || ss->hw_mode & SPI_TX_DUAL) 596 sprd_spi_tx_req(ss); 597 } else { 598 sprd_spi_set_rx_length(ss, trans_len); 599 600 /* 601 * For our 3 wires mode or dual TX line mode, we need 602 * to request the controller to read. 603 */ 604 if (ss->hw_mode & SPI_3WIRE || ss->hw_mode & SPI_TX_DUAL) 605 sprd_spi_rx_req(ss); 606 else 607 write_size = ss->write_bufs(ss, trans_len); 608 } 609 610 if (write_size < 0) { 611 ret = write_size; 612 dev_err(ss->dev, "failed to write, ret = %d\n", ret); 613 goto trans_complete; 614 } 615 616 if (ss->trans_mode & SPRD_SPI_RX_MODE) { 617 /* 618 * Set up the DMA receive data length, which must be an 619 * integral multiple of fragment length. But when the length 620 * of received data is less than fragment length, DMA can be 621 * configured to receive data according to the actual length 622 * of received data. 623 */ 624 ss->dma.rx_len = t->len > ss->dma.fragmens_len ? 625 (t->len - t->len % ss->dma.fragmens_len) : 626 t->len; 627 ret = sprd_spi_dma_rx_config(ss, t); 628 if (ret < 0) { 629 dev_err(&sdev->dev, 630 "failed to configure rx DMA, ret = %d\n", ret); 631 goto trans_complete; 632 } 633 } 634 635 sprd_spi_dma_enable(ss, true); 636 wait_for_completion(&(ss->xfer_completion)); 637 638 if (ss->trans_mode & SPRD_SPI_TX_MODE) 639 ret = write_size; 640 else 641 ret = ss->dma.rx_len; 642 643trans_complete: 644 sprd_spi_dma_enable(ss, false); 645 sprd_spi_enter_idle(ss); 646 sprd_spi_irq_disable(ss); 647 648 return ret; 649} 650 651static void sprd_spi_set_speed(struct sprd_spi *ss, u32 speed_hz) 652{ 653 /* 654 * From SPI datasheet, the prescale calculation formula: 655 * prescale = SPI source clock / (2 * SPI_freq) - 1; 656 */ 657 u32 clk_div = DIV_ROUND_UP(ss->src_clk, speed_hz << 1) - 1; 658 659 /* Save the real hardware speed */ 660 ss->hw_speed_hz = (ss->src_clk >> 1) / (clk_div + 1); 661 writel_relaxed(clk_div, ss->base + SPRD_SPI_CLKD); 662} 663 664static int sprd_spi_init_hw(struct sprd_spi *ss, struct spi_transfer *t) 665{ 666 struct spi_delay *d = &t->word_delay; 667 u16 word_delay, interval; 668 u32 val; 669 670 if (d->unit != SPI_DELAY_UNIT_SCK) 671 return -EINVAL; 672 673 val = readl_relaxed(ss->base + SPRD_SPI_CTL0); 674 val &= ~(SPRD_SPI_SCK_REV | SPRD_SPI_NG_TX | SPRD_SPI_NG_RX); 675 /* Set default chip selection, clock phase and clock polarity */ 676 val |= ss->hw_mode & SPI_CPHA ? SPRD_SPI_NG_RX : SPRD_SPI_NG_TX; 677 val |= ss->hw_mode & SPI_CPOL ? SPRD_SPI_SCK_REV : 0; 678 writel_relaxed(val, ss->base + SPRD_SPI_CTL0); 679 680 /* 681 * Set the intervals of two SPI frames, and the inteval calculation 682 * formula as below per datasheet: 683 * interval time (source clock cycles) = interval * 4 + 10. 684 */ 685 word_delay = clamp_t(u16, d->value, SPRD_SPI_MIN_DELAY_CYCLE, 686 SPRD_SPI_MAX_DELAY_CYCLE); 687 interval = DIV_ROUND_UP(word_delay - 10, 4); 688 ss->word_delay = interval * 4 + 10; 689 writel_relaxed(interval, ss->base + SPRD_SPI_CTL5); 690 691 /* Reset SPI fifo */ 692 writel_relaxed(1, ss->base + SPRD_SPI_FIFO_RST); 693 writel_relaxed(0, ss->base + SPRD_SPI_FIFO_RST); 694 695 /* Set SPI work mode */ 696 val = readl_relaxed(ss->base + SPRD_SPI_CTL7); 697 val &= ~SPRD_SPI_MODE_MASK; 698 699 if (ss->hw_mode & SPI_3WIRE) 700 val |= SPRD_SPI_3WIRE_MODE << SPRD_SPI_MODE_OFFSET; 701 else 702 val |= SPRD_SPI_4WIRE_MODE << SPRD_SPI_MODE_OFFSET; 703 704 if (ss->hw_mode & SPI_TX_DUAL) 705 val |= SPRD_SPI_DATA_LINE2_EN; 706 else 707 val &= ~SPRD_SPI_DATA_LINE2_EN; 708 709 writel_relaxed(val, ss->base + SPRD_SPI_CTL7); 710 711 return 0; 712} 713 714static int sprd_spi_setup_transfer(struct spi_device *sdev, 715 struct spi_transfer *t) 716{ 717 struct sprd_spi *ss = spi_controller_get_devdata(sdev->controller); 718 u8 bits_per_word = t->bits_per_word; 719 u32 val, mode = 0; 720 int ret; 721 722 ss->len = t->len; 723 ss->tx_buf = t->tx_buf; 724 ss->rx_buf = t->rx_buf; 725 726 ss->hw_mode = sdev->mode; 727 ret = sprd_spi_init_hw(ss, t); 728 if (ret) 729 return ret; 730 731 /* Set tansfer speed and valid bits */ 732 sprd_spi_set_speed(ss, t->speed_hz); 733 sprd_spi_set_transfer_bits(ss, bits_per_word); 734 735 if (bits_per_word > 16) 736 bits_per_word = round_up(bits_per_word, 16); 737 else 738 bits_per_word = round_up(bits_per_word, 8); 739 740 switch (bits_per_word) { 741 case 8: 742 ss->trans_len = t->len; 743 ss->read_bufs = sprd_spi_read_bufs_u8; 744 ss->write_bufs = sprd_spi_write_bufs_u8; 745 ss->dma.width = DMA_SLAVE_BUSWIDTH_1_BYTE; 746 ss->dma.fragmens_len = SPRD_SPI_DMA_STEP; 747 break; 748 case 16: 749 ss->trans_len = t->len >> 1; 750 ss->read_bufs = sprd_spi_read_bufs_u16; 751 ss->write_bufs = sprd_spi_write_bufs_u16; 752 ss->dma.width = DMA_SLAVE_BUSWIDTH_2_BYTES; 753 ss->dma.fragmens_len = SPRD_SPI_DMA_STEP << 1; 754 break; 755 case 32: 756 ss->trans_len = t->len >> 2; 757 ss->read_bufs = sprd_spi_read_bufs_u32; 758 ss->write_bufs = sprd_spi_write_bufs_u32; 759 ss->dma.width = DMA_SLAVE_BUSWIDTH_4_BYTES; 760 ss->dma.fragmens_len = SPRD_SPI_DMA_STEP << 2; 761 break; 762 default: 763 return -EINVAL; 764 } 765 766 /* Set transfer read or write mode */ 767 val = readl_relaxed(ss->base + SPRD_SPI_CTL1); 768 val &= ~SPRD_SPI_RTX_MD_MASK; 769 if (t->tx_buf) 770 mode |= SPRD_SPI_TX_MODE; 771 if (t->rx_buf) 772 mode |= SPRD_SPI_RX_MODE; 773 774 writel_relaxed(val | mode, ss->base + SPRD_SPI_CTL1); 775 776 ss->trans_mode = mode; 777 778 /* 779 * If in only receive mode, we need to trigger the SPI controller to 780 * receive data automatically. 781 */ 782 if (ss->trans_mode == SPRD_SPI_RX_MODE) 783 ss->write_bufs = sprd_spi_write_only_receive; 784 785 return 0; 786} 787 788static int sprd_spi_transfer_one(struct spi_controller *sctlr, 789 struct spi_device *sdev, 790 struct spi_transfer *t) 791{ 792 int ret; 793 794 ret = sprd_spi_setup_transfer(sdev, t); 795 if (ret) 796 goto setup_err; 797 798 if (sctlr->can_dma(sctlr, sdev, t)) 799 ret = sprd_spi_dma_txrx_bufs(sdev, t); 800 else 801 ret = sprd_spi_txrx_bufs(sdev, t); 802 803 if (ret == t->len) 804 ret = 0; 805 else if (ret >= 0) 806 ret = -EREMOTEIO; 807 808setup_err: 809 spi_finalize_current_transfer(sctlr); 810 811 return ret; 812} 813 814static irqreturn_t sprd_spi_handle_irq(int irq, void *data) 815{ 816 struct sprd_spi *ss = (struct sprd_spi *)data; 817 u32 val = readl_relaxed(ss->base + SPRD_SPI_INT_MASK_STS); 818 819 if (val & SPRD_SPI_MASK_TX_END) { 820 writel_relaxed(SPRD_SPI_TX_END_CLR, ss->base + SPRD_SPI_INT_CLR); 821 if (!(ss->trans_mode & SPRD_SPI_RX_MODE)) 822 complete(&ss->xfer_completion); 823 824 return IRQ_HANDLED; 825 } 826 827 if (val & SPRD_SPI_MASK_RX_END) { 828 writel_relaxed(SPRD_SPI_RX_END_CLR, ss->base + SPRD_SPI_INT_CLR); 829 if (ss->dma.rx_len < ss->len) { 830 ss->rx_buf += ss->dma.rx_len; 831 ss->dma.rx_len += 832 ss->read_bufs(ss, ss->len - ss->dma.rx_len); 833 } 834 complete(&ss->xfer_completion); 835 836 return IRQ_HANDLED; 837 } 838 839 return IRQ_NONE; 840} 841 842static int sprd_spi_irq_init(struct platform_device *pdev, struct sprd_spi *ss) 843{ 844 int ret; 845 846 ss->irq = platform_get_irq(pdev, 0); 847 if (ss->irq < 0) 848 return ss->irq; 849 850 ret = devm_request_irq(&pdev->dev, ss->irq, sprd_spi_handle_irq, 851 0, pdev->name, ss); 852 if (ret) 853 dev_err(&pdev->dev, "failed to request spi irq %d, ret = %d\n", 854 ss->irq, ret); 855 856 return ret; 857} 858 859static int sprd_spi_clk_init(struct platform_device *pdev, struct sprd_spi *ss) 860{ 861 struct clk *clk_spi, *clk_parent; 862 863 clk_spi = devm_clk_get(&pdev->dev, "spi"); 864 if (IS_ERR(clk_spi)) { 865 dev_warn(&pdev->dev, "can't get the spi clock\n"); 866 clk_spi = NULL; 867 } 868 869 clk_parent = devm_clk_get(&pdev->dev, "source"); 870 if (IS_ERR(clk_parent)) { 871 dev_warn(&pdev->dev, "can't get the source clock\n"); 872 clk_parent = NULL; 873 } 874 875 ss->clk = devm_clk_get(&pdev->dev, "enable"); 876 if (IS_ERR(ss->clk)) { 877 dev_err(&pdev->dev, "can't get the enable clock\n"); 878 return PTR_ERR(ss->clk); 879 } 880 881 if (!clk_set_parent(clk_spi, clk_parent)) 882 ss->src_clk = clk_get_rate(clk_spi); 883 else 884 ss->src_clk = SPRD_SPI_DEFAULT_SOURCE; 885 886 return 0; 887} 888 889static bool sprd_spi_can_dma(struct spi_controller *sctlr, 890 struct spi_device *spi, struct spi_transfer *t) 891{ 892 struct sprd_spi *ss = spi_controller_get_devdata(sctlr); 893 894 return ss->dma.enable && (t->len > SPRD_SPI_FIFO_SIZE); 895} 896 897static int sprd_spi_dma_init(struct platform_device *pdev, struct sprd_spi *ss) 898{ 899 int ret; 900 901 ret = sprd_spi_dma_request(ss); 902 if (ret) { 903 if (ret == -EPROBE_DEFER) 904 return ret; 905 906 dev_warn(&pdev->dev, 907 "failed to request dma, enter no dma mode, ret = %d\n", 908 ret); 909 910 return 0; 911 } 912 913 ss->dma.enable = true; 914 915 return 0; 916} 917 918static int sprd_spi_probe(struct platform_device *pdev) 919{ 920 struct spi_controller *sctlr; 921 struct resource *res; 922 struct sprd_spi *ss; 923 int ret; 924 925 pdev->id = of_alias_get_id(pdev->dev.of_node, "spi"); 926 sctlr = spi_alloc_host(&pdev->dev, sizeof(*ss)); 927 if (!sctlr) 928 return -ENOMEM; 929 930 ss = spi_controller_get_devdata(sctlr); 931 ss->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); 932 if (IS_ERR(ss->base)) { 933 ret = PTR_ERR(ss->base); 934 goto free_controller; 935 } 936 937 ss->phy_base = res->start; 938 ss->dev = &pdev->dev; 939 sctlr->dev.of_node = pdev->dev.of_node; 940 sctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_3WIRE | SPI_TX_DUAL; 941 sctlr->bus_num = pdev->id; 942 sctlr->set_cs = sprd_spi_chipselect; 943 sctlr->transfer_one = sprd_spi_transfer_one; 944 sctlr->can_dma = sprd_spi_can_dma; 945 sctlr->auto_runtime_pm = true; 946 sctlr->max_speed_hz = min_t(u32, ss->src_clk >> 1, 947 SPRD_SPI_MAX_SPEED_HZ); 948 949 init_completion(&ss->xfer_completion); 950 platform_set_drvdata(pdev, sctlr); 951 ret = sprd_spi_clk_init(pdev, ss); 952 if (ret) 953 goto free_controller; 954 955 ret = sprd_spi_irq_init(pdev, ss); 956 if (ret) 957 goto free_controller; 958 959 ret = sprd_spi_dma_init(pdev, ss); 960 if (ret) 961 goto free_controller; 962 963 ret = clk_prepare_enable(ss->clk); 964 if (ret) 965 goto release_dma; 966 967 ret = pm_runtime_set_active(&pdev->dev); 968 if (ret < 0) 969 goto disable_clk; 970 971 pm_runtime_set_autosuspend_delay(&pdev->dev, 972 SPRD_SPI_AUTOSUSPEND_DELAY); 973 pm_runtime_use_autosuspend(&pdev->dev); 974 pm_runtime_enable(&pdev->dev); 975 ret = pm_runtime_get_sync(&pdev->dev); 976 if (ret < 0) { 977 dev_err(&pdev->dev, "failed to resume SPI controller\n"); 978 goto err_rpm_put; 979 } 980 981 ret = devm_spi_register_controller(&pdev->dev, sctlr); 982 if (ret) 983 goto err_rpm_put; 984 985 pm_runtime_mark_last_busy(&pdev->dev); 986 pm_runtime_put_autosuspend(&pdev->dev); 987 988 return 0; 989 990err_rpm_put: 991 pm_runtime_put_noidle(&pdev->dev); 992 pm_runtime_disable(&pdev->dev); 993disable_clk: 994 clk_disable_unprepare(ss->clk); 995release_dma: 996 sprd_spi_dma_release(ss); 997free_controller: 998 spi_controller_put(sctlr); 999 1000 return ret; 1001} 1002 1003static void sprd_spi_remove(struct platform_device *pdev) 1004{ 1005 struct spi_controller *sctlr = platform_get_drvdata(pdev); 1006 struct sprd_spi *ss = spi_controller_get_devdata(sctlr); 1007 int ret; 1008 1009 ret = pm_runtime_get_sync(ss->dev); 1010 if (ret < 0) 1011 dev_err(ss->dev, "failed to resume SPI controller\n"); 1012 1013 spi_controller_suspend(sctlr); 1014 1015 if (ret >= 0) { 1016 if (ss->dma.enable) 1017 sprd_spi_dma_release(ss); 1018 clk_disable_unprepare(ss->clk); 1019 } 1020 pm_runtime_put_noidle(&pdev->dev); 1021 pm_runtime_disable(&pdev->dev); 1022} 1023 1024static int __maybe_unused sprd_spi_runtime_suspend(struct device *dev) 1025{ 1026 struct spi_controller *sctlr = dev_get_drvdata(dev); 1027 struct sprd_spi *ss = spi_controller_get_devdata(sctlr); 1028 1029 if (ss->dma.enable) 1030 sprd_spi_dma_release(ss); 1031 1032 clk_disable_unprepare(ss->clk); 1033 1034 return 0; 1035} 1036 1037static int __maybe_unused sprd_spi_runtime_resume(struct device *dev) 1038{ 1039 struct spi_controller *sctlr = dev_get_drvdata(dev); 1040 struct sprd_spi *ss = spi_controller_get_devdata(sctlr); 1041 int ret; 1042 1043 ret = clk_prepare_enable(ss->clk); 1044 if (ret) 1045 return ret; 1046 1047 if (!ss->dma.enable) 1048 return 0; 1049 1050 ret = sprd_spi_dma_request(ss); 1051 if (ret) 1052 clk_disable_unprepare(ss->clk); 1053 1054 return ret; 1055} 1056 1057static const struct dev_pm_ops sprd_spi_pm_ops = { 1058 SET_RUNTIME_PM_OPS(sprd_spi_runtime_suspend, 1059 sprd_spi_runtime_resume, NULL) 1060}; 1061 1062static const struct of_device_id sprd_spi_of_match[] = { 1063 { .compatible = "sprd,sc9860-spi", }, 1064 { /* sentinel */ } 1065}; 1066MODULE_DEVICE_TABLE(of, sprd_spi_of_match); 1067 1068static struct platform_driver sprd_spi_driver = { 1069 .driver = { 1070 .name = "sprd-spi", 1071 .of_match_table = sprd_spi_of_match, 1072 .pm = &sprd_spi_pm_ops, 1073 }, 1074 .probe = sprd_spi_probe, 1075 .remove_new = sprd_spi_remove, 1076}; 1077 1078module_platform_driver(sprd_spi_driver); 1079 1080MODULE_DESCRIPTION("Spreadtrum SPI Controller driver"); 1081MODULE_AUTHOR("Lanqing Liu <lanqing.liu@spreadtrum.com>"); 1082MODULE_LICENSE("GPL v2"); 1083