1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * sim710.c - Copyright (C) 1999 Richard Hirst <richard@sleepie.demon.co.uk>
4 *
5 *----------------------------------------------------------------------------
6 *----------------------------------------------------------------------------
7 *
8 * MCA card detection code by Trent McNair. (now deleted)
9 * Fixes to not explicitly nul bss data from Xavier Bestel.
10 * Some multiboard fixes from Rolf Eike Beer.
11 * Auto probing of EISA config space from Trevor Hemsley.
12 *
13 * Rewritten to use 53c700.c by James.Bottomley@SteelEye.com
14 */
15
16#include <linux/module.h>
17#include <linux/slab.h>
18
19#include <linux/blkdev.h>
20#include <linux/device.h>
21#include <linux/init.h>
22#include <linux/eisa.h>
23#include <linux/interrupt.h>
24#include <scsi/scsi_host.h>
25#include <scsi/scsi_device.h>
26#include <scsi/scsi_transport.h>
27#include <scsi/scsi_transport_spi.h>
28
29#include "53c700.h"
30
31
32/* Must be enough for EISA */
33#define MAX_SLOTS 8
34static __u8 __initdata id_array[MAX_SLOTS] = { [0 ... MAX_SLOTS-1] = 7 };
35
36static char *sim710;		/* command line passed by insmod */
37
38MODULE_AUTHOR("Richard Hirst");
39MODULE_DESCRIPTION("Simple NCR53C710 driver");
40MODULE_LICENSE("GPL");
41
42module_param(sim710, charp, 0);
43
44#ifdef MODULE
45#define ARG_SEP ' '
46#else
47#define ARG_SEP ','
48#endif
49
50static __init int
51param_setup(char *str)
52{
53	char *pos = str, *next;
54	int slot = -1;
55
56	while(pos != NULL && (next = strchr(pos, ':')) != NULL) {
57		int val = (int)simple_strtoul(++next, NULL, 0);
58
59		if(!strncmp(pos, "slot:", 5))
60			slot = val;
61		else if(!strncmp(pos, "id:", 3)) {
62			if(slot == -1) {
63				printk(KERN_WARNING "sim710: Must specify slot for id parameter\n");
64			} else if(slot >= MAX_SLOTS) {
65				printk(KERN_WARNING "sim710: Illegal slot %d for id %d\n", slot, val);
66			} else {
67				id_array[slot] = val;
68			}
69		}
70		if((pos = strchr(pos, ARG_SEP)) != NULL)
71			pos++;
72	}
73	return 1;
74}
75__setup("sim710=", param_setup);
76
77static struct scsi_host_template sim710_driver_template = {
78	.name			= "LSI (Symbios) 710 EISA",
79	.proc_name		= "sim710",
80	.this_id		= 7,
81	.module			= THIS_MODULE,
82};
83
84static int sim710_probe_common(struct device *dev, unsigned long base_addr,
85			       int irq, int clock, int differential,
86			       int scsi_id)
87{
88	struct Scsi_Host * host = NULL;
89	struct NCR_700_Host_Parameters *hostdata =
90		kzalloc(sizeof(struct NCR_700_Host_Parameters),	GFP_KERNEL);
91
92	printk(KERN_NOTICE "sim710: %s\n", dev_name(dev));
93	printk(KERN_NOTICE "sim710: irq = %d, clock = %d, base = 0x%lx, scsi_id = %d\n",
94	       irq, clock, base_addr, scsi_id);
95
96	if(hostdata == NULL) {
97		printk(KERN_ERR "sim710: Failed to allocate host data\n");
98		goto out;
99	}
100
101	if(request_region(base_addr, 64, "sim710") == NULL) {
102		printk(KERN_ERR "sim710: Failed to reserve IO region 0x%lx\n",
103		       base_addr);
104		goto out_free;
105	}
106
107	/* Fill in the three required pieces of hostdata */
108	hostdata->base = ioport_map(base_addr, 64);
109	hostdata->differential = differential;
110	hostdata->clock = clock;
111	hostdata->chip710 = 1;
112	hostdata->burst_length = 8;
113
114	/* and register the chip */
115	if((host = NCR_700_detect(&sim710_driver_template, hostdata, dev))
116	   == NULL) {
117		printk(KERN_ERR "sim710: No host detected; card configuration problem?\n");
118		goto out_release;
119	}
120	host->this_id = scsi_id;
121	host->base = base_addr;
122	host->irq = irq;
123	if (request_irq(irq, NCR_700_intr, IRQF_SHARED, "sim710", host)) {
124		printk(KERN_ERR "sim710: request_irq failed\n");
125		goto out_put_host;
126	}
127
128	dev_set_drvdata(dev, host);
129	scsi_scan_host(host);
130
131	return 0;
132
133 out_put_host:
134	scsi_host_put(host);
135 out_release:
136	release_region(base_addr, 64);
137 out_free:
138	kfree(hostdata);
139 out:
140	return -ENODEV;
141}
142
143static int sim710_device_remove(struct device *dev)
144{
145	struct Scsi_Host *host = dev_get_drvdata(dev);
146	struct NCR_700_Host_Parameters *hostdata =
147		(struct NCR_700_Host_Parameters *)host->hostdata[0];
148
149	scsi_remove_host(host);
150	NCR_700_release(host);
151	kfree(hostdata);
152	free_irq(host->irq, host);
153	release_region(host->base, 64);
154	return 0;
155}
156
157#ifdef CONFIG_EISA
158static struct eisa_device_id sim710_eisa_ids[] = {
159	{ "CPQ4410" },
160	{ "CPQ4411" },
161	{ "HWP0C80" },
162	{ "" }
163};
164MODULE_DEVICE_TABLE(eisa, sim710_eisa_ids);
165
166static int sim710_eisa_probe(struct device *dev)
167{
168	struct eisa_device *edev = to_eisa_device(dev);
169	unsigned long io_addr = edev->base_addr;
170	char eisa_cpq_irqs[] = { 11, 14, 15, 10, 9, 0 };
171	char eisa_hwp_irqs[] = { 3, 4, 5, 7, 12, 10, 11, 0};
172	char *eisa_irqs;
173	unsigned char irq_index;
174	unsigned char irq, differential = 0, scsi_id = 7;
175
176	if(strcmp(edev->id.sig, "HWP0C80") == 0) {
177		__u8 val;
178		eisa_irqs =  eisa_hwp_irqs;
179		irq_index = (inb(io_addr + 0xc85) & 0x7) - 1;
180
181		val = inb(io_addr + 0x4);
182		scsi_id = ffs(val) - 1;
183
184		if(scsi_id > 7 || (val & ~(1<<scsi_id)) != 0) {
185			printk(KERN_ERR "sim710.c, EISA card %s has incorrect scsi_id, setting to 7\n", dev_name(dev));
186			scsi_id = 7;
187		}
188	} else {
189		eisa_irqs = eisa_cpq_irqs;
190		irq_index = inb(io_addr + 0xc88) & 0x07;
191	}
192
193	if(irq_index >= strlen(eisa_irqs)) {
194		printk("sim710.c: irq nasty\n");
195		return -ENODEV;
196	}
197
198	irq = eisa_irqs[irq_index];
199
200	return sim710_probe_common(dev, io_addr, irq, 50,
201				   differential, scsi_id);
202}
203
204static struct eisa_driver sim710_eisa_driver = {
205	.id_table		= sim710_eisa_ids,
206	.driver = {
207		.name		= "sim710",
208		.probe		= sim710_eisa_probe,
209		.remove		= sim710_device_remove,
210	},
211};
212#endif /* CONFIG_EISA */
213
214static int __init sim710_init(void)
215{
216#ifdef MODULE
217	if (sim710)
218		param_setup(sim710);
219#endif
220
221#ifdef CONFIG_EISA
222	/*
223	 * FIXME: We'd really like to return -ENODEV if no devices have actually
224	 * been found.  However eisa_driver_register() only reports problems
225	 * with kobject_register() so simply return success for now.
226	 */
227	eisa_driver_register(&sim710_eisa_driver);
228#endif
229	return 0;
230}
231
232static void __exit sim710_exit(void)
233{
234#ifdef CONFIG_EISA
235	eisa_driver_unregister(&sim710_eisa_driver);
236#endif
237}
238
239module_init(sim710_init);
240module_exit(sim710_exit);
241