1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 *	Real Time Clock interface for Linux on Atmel AT91RM9200
4 *
5 *	Copyright (C) 2002 Rick Bronson
6 *
7 *	Converted to RTC class model by Andrew Victor
8 *
9 *	Ported to Linux 2.6 by Steven Scholz
10 *	Based on s3c2410-rtc.c Simtec Electronics
11 *
12 *	Based on sa1100-rtc.c by Nils Faerber
13 *	Based on rtc.c by Paul Gortmaker
14 */
15
16#include <linux/bcd.h>
17#include <linux/bitfield.h>
18#include <linux/clk.h>
19#include <linux/completion.h>
20#include <linux/interrupt.h>
21#include <linux/ioctl.h>
22#include <linux/io.h>
23#include <linux/kernel.h>
24#include <linux/module.h>
25#include <linux/of.h>
26#include <linux/platform_device.h>
27#include <linux/rtc.h>
28#include <linux/spinlock.h>
29#include <linux/suspend.h>
30#include <linux/time.h>
31#include <linux/uaccess.h>
32
33#define	AT91_RTC_CR		0x00			/* Control Register */
34#define		AT91_RTC_UPDTIM		BIT(0)		/* Update Request Time Register */
35#define		AT91_RTC_UPDCAL		BIT(1)		/* Update Request Calendar Register */
36
37#define	AT91_RTC_MR		0x04			/* Mode Register */
38#define		AT91_RTC_HRMOD		BIT(0)		/* 12/24 hour mode */
39#define		AT91_RTC_NEGPPM		BIT(4)		/* Negative PPM correction */
40#define		AT91_RTC_CORRECTION	GENMASK(14, 8)	/* Slow clock correction */
41#define		AT91_RTC_HIGHPPM	BIT(15)		/* High PPM correction */
42
43#define	AT91_RTC_TIMR		0x08			/* Time Register */
44#define		AT91_RTC_SEC		GENMASK(6, 0)	/* Current Second */
45#define		AT91_RTC_MIN		GENMASK(14, 8)	/* Current Minute */
46#define		AT91_RTC_HOUR		GENMASK(21, 16)	/* Current Hour */
47#define		AT91_RTC_AMPM		BIT(22)		/* Ante Meridiem Post Meridiem Indicator */
48
49#define	AT91_RTC_CALR		0x0c			/* Calendar Register */
50#define		AT91_RTC_CENT		GENMASK(6, 0)	/* Current Century */
51#define		AT91_RTC_YEAR		GENMASK(15, 8)	/* Current Year */
52#define		AT91_RTC_MONTH		GENMASK(20, 16)	/* Current Month */
53#define		AT91_RTC_DAY		GENMASK(23, 21)	/* Current Day */
54#define		AT91_RTC_DATE		GENMASK(29, 24)	/* Current Date */
55
56#define	AT91_RTC_TIMALR		0x10			/* Time Alarm Register */
57#define		AT91_RTC_SECEN		BIT(7)		/* Second Alarm Enable */
58#define		AT91_RTC_MINEN		BIT(15)		/* Minute Alarm Enable */
59#define		AT91_RTC_HOUREN		BIT(23)		/* Hour Alarm Enable */
60
61#define	AT91_RTC_CALALR		0x14			/* Calendar Alarm Register */
62#define		AT91_RTC_MTHEN		BIT(23)		/* Month Alarm Enable */
63#define		AT91_RTC_DATEEN		BIT(31)		/* Date Alarm Enable */
64
65#define	AT91_RTC_SR		0x18			/* Status Register */
66#define		AT91_RTC_ACKUPD		BIT(0)		/* Acknowledge for Update */
67#define		AT91_RTC_ALARM		BIT(1)		/* Alarm Flag */
68#define		AT91_RTC_SECEV		BIT(2)		/* Second Event */
69#define		AT91_RTC_TIMEV		BIT(3)		/* Time Event */
70#define		AT91_RTC_CALEV		BIT(4)		/* Calendar Event */
71
72#define	AT91_RTC_SCCR		0x1c			/* Status Clear Command Register */
73#define	AT91_RTC_IER		0x20			/* Interrupt Enable Register */
74#define	AT91_RTC_IDR		0x24			/* Interrupt Disable Register */
75#define	AT91_RTC_IMR		0x28			/* Interrupt Mask Register */
76
77#define	AT91_RTC_VER		0x2c			/* Valid Entry Register */
78#define		AT91_RTC_NVTIM		BIT(0)		/* Non valid Time */
79#define		AT91_RTC_NVCAL		BIT(1)		/* Non valid Calendar */
80#define		AT91_RTC_NVTIMALR	BIT(2)		/* Non valid Time Alarm */
81#define		AT91_RTC_NVCALALR	BIT(3)		/* Non valid Calendar Alarm */
82
83#define AT91_RTC_CORR_DIVIDEND		3906000
84#define AT91_RTC_CORR_LOW_RATIO		20
85
86#define at91_rtc_read(field) \
87	readl_relaxed(at91_rtc_regs + field)
88#define at91_rtc_write(field, val) \
89	writel_relaxed((val), at91_rtc_regs + field)
90
91struct at91_rtc_config {
92	bool use_shadow_imr;
93	bool has_correction;
94};
95
96static const struct at91_rtc_config *at91_rtc_config;
97static DECLARE_COMPLETION(at91_rtc_updated);
98static DECLARE_COMPLETION(at91_rtc_upd_rdy);
99static void __iomem *at91_rtc_regs;
100static int irq;
101static DEFINE_SPINLOCK(at91_rtc_lock);
102static u32 at91_rtc_shadow_imr;
103static bool suspended;
104static DEFINE_SPINLOCK(suspended_lock);
105static unsigned long cached_events;
106static u32 at91_rtc_imr;
107static struct clk *sclk;
108
109static void at91_rtc_write_ier(u32 mask)
110{
111	unsigned long flags;
112
113	spin_lock_irqsave(&at91_rtc_lock, flags);
114	at91_rtc_shadow_imr |= mask;
115	at91_rtc_write(AT91_RTC_IER, mask);
116	spin_unlock_irqrestore(&at91_rtc_lock, flags);
117}
118
119static void at91_rtc_write_idr(u32 mask)
120{
121	unsigned long flags;
122
123	spin_lock_irqsave(&at91_rtc_lock, flags);
124	at91_rtc_write(AT91_RTC_IDR, mask);
125	/*
126	 * Register read back (of any RTC-register) needed to make sure
127	 * IDR-register write has reached the peripheral before updating
128	 * shadow mask.
129	 *
130	 * Note that there is still a possibility that the mask is updated
131	 * before interrupts have actually been disabled in hardware. The only
132	 * way to be certain would be to poll the IMR-register, which is
133	 * the very register we are trying to emulate. The register read back
134	 * is a reasonable heuristic.
135	 */
136	at91_rtc_read(AT91_RTC_SR);
137	at91_rtc_shadow_imr &= ~mask;
138	spin_unlock_irqrestore(&at91_rtc_lock, flags);
139}
140
141static u32 at91_rtc_read_imr(void)
142{
143	unsigned long flags;
144	u32 mask;
145
146	if (at91_rtc_config->use_shadow_imr) {
147		spin_lock_irqsave(&at91_rtc_lock, flags);
148		mask = at91_rtc_shadow_imr;
149		spin_unlock_irqrestore(&at91_rtc_lock, flags);
150	} else {
151		mask = at91_rtc_read(AT91_RTC_IMR);
152	}
153
154	return mask;
155}
156
157/*
158 * Decode time/date into rtc_time structure
159 */
160static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg,
161				struct rtc_time *tm)
162{
163	unsigned int time, date;
164
165	/* must read twice in case it changes */
166	do {
167		time = at91_rtc_read(timereg);
168		date = at91_rtc_read(calreg);
169	} while ((time != at91_rtc_read(timereg)) ||
170			(date != at91_rtc_read(calreg)));
171
172	tm->tm_sec  = bcd2bin(FIELD_GET(AT91_RTC_SEC, time));
173	tm->tm_min  = bcd2bin(FIELD_GET(AT91_RTC_MIN, time));
174	tm->tm_hour = bcd2bin(FIELD_GET(AT91_RTC_HOUR, time));
175
176	/*
177	 * The Calendar Alarm register does not have a field for
178	 * the year - so these will return an invalid value.
179	 */
180	tm->tm_year  = bcd2bin(date & AT91_RTC_CENT) * 100;	/* century */
181	tm->tm_year += bcd2bin(FIELD_GET(AT91_RTC_YEAR, date));	/* year */
182
183	tm->tm_wday = bcd2bin(FIELD_GET(AT91_RTC_DAY, date)) - 1;	/* day of the week [0-6], Sunday=0 */
184	tm->tm_mon  = bcd2bin(FIELD_GET(AT91_RTC_MONTH, date)) - 1;
185	tm->tm_mday = bcd2bin(FIELD_GET(AT91_RTC_DATE, date));
186}
187
188/*
189 * Read current time and date in RTC
190 */
191static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
192{
193	at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, tm);
194	tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
195	tm->tm_year = tm->tm_year - 1900;
196
197	dev_dbg(dev, "%s(): %ptR\n", __func__, tm);
198
199	return 0;
200}
201
202/*
203 * Set current time and date in RTC
204 */
205static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
206{
207	unsigned long cr;
208
209	dev_dbg(dev, "%s(): %ptR\n", __func__, tm);
210
211	wait_for_completion(&at91_rtc_upd_rdy);
212
213	/* Stop Time/Calendar from counting */
214	cr = at91_rtc_read(AT91_RTC_CR);
215	at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM);
216
217	at91_rtc_write_ier(AT91_RTC_ACKUPD);
218	wait_for_completion(&at91_rtc_updated);	/* wait for ACKUPD interrupt */
219	at91_rtc_write_idr(AT91_RTC_ACKUPD);
220
221	at91_rtc_write(AT91_RTC_TIMR,
222			  FIELD_PREP(AT91_RTC_SEC, bin2bcd(tm->tm_sec))
223			| FIELD_PREP(AT91_RTC_MIN, bin2bcd(tm->tm_min))
224			| FIELD_PREP(AT91_RTC_HOUR, bin2bcd(tm->tm_hour)));
225
226	at91_rtc_write(AT91_RTC_CALR,
227			  FIELD_PREP(AT91_RTC_CENT,
228				     bin2bcd((tm->tm_year + 1900) / 100))
229			| FIELD_PREP(AT91_RTC_YEAR, bin2bcd(tm->tm_year % 100))
230			| FIELD_PREP(AT91_RTC_MONTH, bin2bcd(tm->tm_mon + 1))
231			| FIELD_PREP(AT91_RTC_DAY, bin2bcd(tm->tm_wday + 1))
232			| FIELD_PREP(AT91_RTC_DATE, bin2bcd(tm->tm_mday)));
233
234	/* Restart Time/Calendar */
235	cr = at91_rtc_read(AT91_RTC_CR);
236	at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_SECEV);
237	at91_rtc_write(AT91_RTC_CR, cr & ~(AT91_RTC_UPDCAL | AT91_RTC_UPDTIM));
238	at91_rtc_write_ier(AT91_RTC_SECEV);
239
240	return 0;
241}
242
243/*
244 * Read alarm time and date in RTC
245 */
246static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
247{
248	struct rtc_time *tm = &alrm->time;
249
250	at91_rtc_decodetime(AT91_RTC_TIMALR, AT91_RTC_CALALR, tm);
251	tm->tm_year = -1;
252
253	alrm->enabled = (at91_rtc_read_imr() & AT91_RTC_ALARM)
254			? 1 : 0;
255
256	dev_dbg(dev, "%s(): %ptR %sabled\n", __func__, tm,
257		alrm->enabled ? "en" : "dis");
258
259	return 0;
260}
261
262/*
263 * Set alarm time and date in RTC
264 */
265static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
266{
267	struct rtc_time tm = alrm->time;
268
269	at91_rtc_write_idr(AT91_RTC_ALARM);
270	at91_rtc_write(AT91_RTC_TIMALR,
271		  FIELD_PREP(AT91_RTC_SEC, bin2bcd(alrm->time.tm_sec))
272		| FIELD_PREP(AT91_RTC_MIN, bin2bcd(alrm->time.tm_min))
273		| FIELD_PREP(AT91_RTC_HOUR, bin2bcd(alrm->time.tm_hour))
274		| AT91_RTC_HOUREN | AT91_RTC_MINEN | AT91_RTC_SECEN);
275	at91_rtc_write(AT91_RTC_CALALR,
276		  FIELD_PREP(AT91_RTC_MONTH, bin2bcd(alrm->time.tm_mon + 1))
277		| FIELD_PREP(AT91_RTC_DATE, bin2bcd(alrm->time.tm_mday))
278		| AT91_RTC_DATEEN | AT91_RTC_MTHEN);
279
280	if (alrm->enabled) {
281		at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
282		at91_rtc_write_ier(AT91_RTC_ALARM);
283	}
284
285	dev_dbg(dev, "%s(): %ptR\n", __func__, &tm);
286
287	return 0;
288}
289
290static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
291{
292	dev_dbg(dev, "%s(): cmd=%08x\n", __func__, enabled);
293
294	if (enabled) {
295		at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
296		at91_rtc_write_ier(AT91_RTC_ALARM);
297	} else
298		at91_rtc_write_idr(AT91_RTC_ALARM);
299
300	return 0;
301}
302
303static int at91_rtc_readoffset(struct device *dev, long *offset)
304{
305	u32 mr = at91_rtc_read(AT91_RTC_MR);
306	long val = FIELD_GET(AT91_RTC_CORRECTION, mr);
307
308	if (!val) {
309		*offset = 0;
310		return 0;
311	}
312
313	val++;
314
315	if (!(mr & AT91_RTC_NEGPPM))
316		val = -val;
317
318	if (!(mr & AT91_RTC_HIGHPPM))
319		val *= AT91_RTC_CORR_LOW_RATIO;
320
321	*offset = DIV_ROUND_CLOSEST(AT91_RTC_CORR_DIVIDEND, val);
322
323	return 0;
324}
325
326static int at91_rtc_setoffset(struct device *dev, long offset)
327{
328	long corr;
329	u32 mr;
330
331	if (offset > AT91_RTC_CORR_DIVIDEND / 2)
332		return -ERANGE;
333	if (offset < -AT91_RTC_CORR_DIVIDEND / 2)
334		return -ERANGE;
335
336	mr = at91_rtc_read(AT91_RTC_MR);
337	mr &= ~(AT91_RTC_NEGPPM | AT91_RTC_CORRECTION | AT91_RTC_HIGHPPM);
338
339	if (offset > 0)
340		mr |= AT91_RTC_NEGPPM;
341	else
342		offset = -offset;
343
344	/* offset less than 764 ppb, disable correction*/
345	if (offset < 764) {
346		at91_rtc_write(AT91_RTC_MR, mr & ~AT91_RTC_NEGPPM);
347
348		return 0;
349	}
350
351	/*
352	 * 29208 ppb is the perfect cutoff between low range and high range
353	 * low range values are never better than high range value after that.
354	 */
355	if (offset < 29208) {
356		corr = DIV_ROUND_CLOSEST(AT91_RTC_CORR_DIVIDEND, offset * AT91_RTC_CORR_LOW_RATIO);
357	} else {
358		corr = DIV_ROUND_CLOSEST(AT91_RTC_CORR_DIVIDEND, offset);
359		mr |= AT91_RTC_HIGHPPM;
360	}
361
362	if (corr > 128)
363		corr = 128;
364
365	mr |= FIELD_PREP(AT91_RTC_CORRECTION, corr - 1);
366
367	at91_rtc_write(AT91_RTC_MR, mr);
368
369	return 0;
370}
371
372/*
373 * IRQ handler for the RTC
374 */
375static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id)
376{
377	struct platform_device *pdev = dev_id;
378	struct rtc_device *rtc = platform_get_drvdata(pdev);
379	unsigned int rtsr;
380	unsigned long events = 0;
381	int ret = IRQ_NONE;
382
383	spin_lock(&suspended_lock);
384	rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read_imr();
385	if (rtsr) {		/* this interrupt is shared!  Is it ours? */
386		if (rtsr & AT91_RTC_ALARM)
387			events |= (RTC_AF | RTC_IRQF);
388		if (rtsr & AT91_RTC_SECEV) {
389			complete(&at91_rtc_upd_rdy);
390			at91_rtc_write_idr(AT91_RTC_SECEV);
391		}
392		if (rtsr & AT91_RTC_ACKUPD)
393			complete(&at91_rtc_updated);
394
395		at91_rtc_write(AT91_RTC_SCCR, rtsr);	/* clear status reg */
396
397		if (!suspended) {
398			rtc_update_irq(rtc, 1, events);
399
400			dev_dbg(&pdev->dev, "%s(): num=%ld, events=0x%02lx\n",
401				__func__, events >> 8, events & 0x000000FF);
402		} else {
403			cached_events |= events;
404			at91_rtc_write_idr(at91_rtc_imr);
405			pm_system_wakeup();
406		}
407
408		ret = IRQ_HANDLED;
409	}
410	spin_unlock(&suspended_lock);
411
412	return ret;
413}
414
415static const struct at91_rtc_config at91rm9200_config = {
416};
417
418static const struct at91_rtc_config at91sam9x5_config = {
419	.use_shadow_imr	= true,
420};
421
422static const struct at91_rtc_config sama5d4_config = {
423	.has_correction = true,
424};
425
426static const struct of_device_id at91_rtc_dt_ids[] = {
427	{
428		.compatible = "atmel,at91rm9200-rtc",
429		.data = &at91rm9200_config,
430	}, {
431		.compatible = "atmel,at91sam9x5-rtc",
432		.data = &at91sam9x5_config,
433	}, {
434		.compatible = "atmel,sama5d4-rtc",
435		.data = &sama5d4_config,
436	}, {
437		.compatible = "atmel,sama5d2-rtc",
438		.data = &sama5d4_config,
439	}, {
440		.compatible = "microchip,sam9x60-rtc",
441		.data = &sama5d4_config,
442	}, {
443		/* sentinel */
444	}
445};
446MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
447
448static const struct rtc_class_ops at91_rtc_ops = {
449	.read_time	= at91_rtc_readtime,
450	.set_time	= at91_rtc_settime,
451	.read_alarm	= at91_rtc_readalarm,
452	.set_alarm	= at91_rtc_setalarm,
453	.alarm_irq_enable = at91_rtc_alarm_irq_enable,
454};
455
456static const struct rtc_class_ops sama5d4_rtc_ops = {
457	.read_time	= at91_rtc_readtime,
458	.set_time	= at91_rtc_settime,
459	.read_alarm	= at91_rtc_readalarm,
460	.set_alarm	= at91_rtc_setalarm,
461	.alarm_irq_enable = at91_rtc_alarm_irq_enable,
462	.set_offset	= at91_rtc_setoffset,
463	.read_offset	= at91_rtc_readoffset,
464};
465
466/*
467 * Initialize and install RTC driver
468 */
469static int __init at91_rtc_probe(struct platform_device *pdev)
470{
471	struct rtc_device *rtc;
472	struct resource *regs;
473	int ret = 0;
474
475	at91_rtc_config = of_device_get_match_data(&pdev->dev);
476	if (!at91_rtc_config)
477		return -ENODEV;
478
479	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
480	if (!regs) {
481		dev_err(&pdev->dev, "no mmio resource defined\n");
482		return -ENXIO;
483	}
484
485	irq = platform_get_irq(pdev, 0);
486	if (irq < 0)
487		return -ENXIO;
488
489	at91_rtc_regs = devm_ioremap(&pdev->dev, regs->start,
490				     resource_size(regs));
491	if (!at91_rtc_regs) {
492		dev_err(&pdev->dev, "failed to map registers, aborting.\n");
493		return -ENOMEM;
494	}
495
496	rtc = devm_rtc_allocate_device(&pdev->dev);
497	if (IS_ERR(rtc))
498		return PTR_ERR(rtc);
499	platform_set_drvdata(pdev, rtc);
500
501	sclk = devm_clk_get(&pdev->dev, NULL);
502	if (IS_ERR(sclk))
503		return PTR_ERR(sclk);
504
505	ret = clk_prepare_enable(sclk);
506	if (ret) {
507		dev_err(&pdev->dev, "Could not enable slow clock\n");
508		return ret;
509	}
510
511	at91_rtc_write(AT91_RTC_CR, 0);
512	at91_rtc_write(AT91_RTC_MR, at91_rtc_read(AT91_RTC_MR) & ~AT91_RTC_HRMOD);
513
514	/* Disable all interrupts */
515	at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM |
516					AT91_RTC_SECEV | AT91_RTC_TIMEV |
517					AT91_RTC_CALEV);
518
519	ret = devm_request_irq(&pdev->dev, irq, at91_rtc_interrupt,
520			       IRQF_SHARED | IRQF_COND_SUSPEND,
521			       "at91_rtc", pdev);
522	if (ret) {
523		dev_err(&pdev->dev, "IRQ %d already in use.\n", irq);
524		goto err_clk;
525	}
526
527	/* cpu init code should really have flagged this device as
528	 * being wake-capable; if it didn't, do that here.
529	 */
530	if (!device_can_wakeup(&pdev->dev))
531		device_init_wakeup(&pdev->dev, 1);
532
533	if (at91_rtc_config->has_correction)
534		rtc->ops = &sama5d4_rtc_ops;
535	else
536		rtc->ops = &at91_rtc_ops;
537
538	rtc->range_min = RTC_TIMESTAMP_BEGIN_1900;
539	rtc->range_max = RTC_TIMESTAMP_END_2099;
540	ret = devm_rtc_register_device(rtc);
541	if (ret)
542		goto err_clk;
543
544	/* enable SECEV interrupt in order to initialize at91_rtc_upd_rdy
545	 * completion.
546	 */
547	at91_rtc_write_ier(AT91_RTC_SECEV);
548
549	dev_info(&pdev->dev, "AT91 Real Time Clock driver.\n");
550	return 0;
551
552err_clk:
553	clk_disable_unprepare(sclk);
554
555	return ret;
556}
557
558/*
559 * Disable and remove the RTC driver
560 */
561static void __exit at91_rtc_remove(struct platform_device *pdev)
562{
563	/* Disable all interrupts */
564	at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM |
565					AT91_RTC_SECEV | AT91_RTC_TIMEV |
566					AT91_RTC_CALEV);
567
568	clk_disable_unprepare(sclk);
569}
570
571static void at91_rtc_shutdown(struct platform_device *pdev)
572{
573	/* Disable all interrupts */
574	at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
575					AT91_RTC_SECEV | AT91_RTC_TIMEV |
576					AT91_RTC_CALEV);
577}
578
579#ifdef CONFIG_PM_SLEEP
580
581/* AT91RM9200 RTC Power management control */
582
583static int at91_rtc_suspend(struct device *dev)
584{
585	/* this IRQ is shared with DBGU and other hardware which isn't
586	 * necessarily doing PM like we are...
587	 */
588	at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
589
590	at91_rtc_imr = at91_rtc_read_imr()
591			& (AT91_RTC_ALARM|AT91_RTC_SECEV);
592	if (at91_rtc_imr) {
593		if (device_may_wakeup(dev)) {
594			unsigned long flags;
595
596			enable_irq_wake(irq);
597
598			spin_lock_irqsave(&suspended_lock, flags);
599			suspended = true;
600			spin_unlock_irqrestore(&suspended_lock, flags);
601		} else {
602			at91_rtc_write_idr(at91_rtc_imr);
603		}
604	}
605	return 0;
606}
607
608static int at91_rtc_resume(struct device *dev)
609{
610	struct rtc_device *rtc = dev_get_drvdata(dev);
611
612	if (at91_rtc_imr) {
613		if (device_may_wakeup(dev)) {
614			unsigned long flags;
615
616			spin_lock_irqsave(&suspended_lock, flags);
617
618			if (cached_events) {
619				rtc_update_irq(rtc, 1, cached_events);
620				cached_events = 0;
621			}
622
623			suspended = false;
624			spin_unlock_irqrestore(&suspended_lock, flags);
625
626			disable_irq_wake(irq);
627		}
628		at91_rtc_write_ier(at91_rtc_imr);
629	}
630	return 0;
631}
632#endif
633
634static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
635
636/*
637 * at91_rtc_remove() lives in .exit.text. For drivers registered via
638 * module_platform_driver_probe() this is ok because they cannot get unbound at
639 * runtime. So mark the driver struct with __refdata to prevent modpost
640 * triggering a section mismatch warning.
641 */
642static struct platform_driver at91_rtc_driver __refdata = {
643	.remove_new	= __exit_p(at91_rtc_remove),
644	.shutdown	= at91_rtc_shutdown,
645	.driver		= {
646		.name	= "at91_rtc",
647		.pm	= &at91_rtc_pm_ops,
648		.of_match_table = at91_rtc_dt_ids,
649	},
650};
651
652module_platform_driver_probe(at91_rtc_driver, at91_rtc_probe);
653
654MODULE_AUTHOR("Rick Bronson");
655MODULE_DESCRIPTION("RTC driver for Atmel AT91RM9200");
656MODULE_LICENSE("GPL");
657MODULE_ALIAS("platform:at91_rtc");
658