1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * PWM device driver for ST SoCs 4 * 5 * Copyright (C) 2013-2016 STMicroelectronics (R&D) Limited 6 * 7 * Author: Ajit Pal Singh <ajitpal.singh@st.com> 8 * Lee Jones <lee.jones@linaro.org> 9 */ 10 11#include <linux/clk.h> 12#include <linux/interrupt.h> 13#include <linux/math64.h> 14#include <linux/mfd/syscon.h> 15#include <linux/module.h> 16#include <linux/of.h> 17#include <linux/platform_device.h> 18#include <linux/pwm.h> 19#include <linux/regmap.h> 20#include <linux/sched.h> 21#include <linux/slab.h> 22#include <linux/time.h> 23#include <linux/wait.h> 24 25#define PWM_OUT_VAL(x) (0x00 + (4 * (x))) /* Device's Duty Cycle register */ 26#define PWM_CPT_VAL(x) (0x10 + (4 * (x))) /* Capture value */ 27#define PWM_CPT_EDGE(x) (0x30 + (4 * (x))) /* Edge to capture on */ 28 29#define STI_PWM_CTRL 0x50 /* Control/Config register */ 30#define STI_INT_EN 0x54 /* Interrupt Enable/Disable register */ 31#define STI_INT_STA 0x58 /* Interrupt Status register */ 32#define PWM_INT_ACK 0x5c 33#define PWM_PRESCALE_LOW_MASK 0x0f 34#define PWM_PRESCALE_HIGH_MASK 0xf0 35#define PWM_CPT_EDGE_MASK 0x03 36#define PWM_INT_ACK_MASK 0x1ff 37 38#define STI_MAX_CPT_DEVS 4 39#define CPT_DC_MAX 0xff 40 41/* Regfield IDs */ 42enum { 43 /* Bits in PWM_CTRL*/ 44 PWMCLK_PRESCALE_LOW, 45 PWMCLK_PRESCALE_HIGH, 46 CPTCLK_PRESCALE, 47 48 PWM_OUT_EN, 49 PWM_CPT_EN, 50 51 PWM_CPT_INT_EN, 52 PWM_CPT_INT_STAT, 53 54 /* Keep last */ 55 MAX_REGFIELDS 56}; 57 58/* 59 * Each capture input can be programmed to detect rising-edge, falling-edge, 60 * either edge or neither egde. 61 */ 62enum sti_cpt_edge { 63 CPT_EDGE_DISABLED, 64 CPT_EDGE_RISING, 65 CPT_EDGE_FALLING, 66 CPT_EDGE_BOTH, 67}; 68 69struct sti_cpt_ddata { 70 u32 snapshot[3]; 71 unsigned int index; 72 struct mutex lock; 73 wait_queue_head_t wait; 74}; 75 76struct sti_pwm_compat_data { 77 const struct reg_field *reg_fields; 78 unsigned int pwm_num_devs; 79 unsigned int cpt_num_devs; 80 unsigned int max_pwm_cnt; 81 unsigned int max_prescale; 82 struct sti_cpt_ddata *ddata; 83}; 84 85struct sti_pwm_chip { 86 struct device *dev; 87 struct clk *pwm_clk; 88 struct clk *cpt_clk; 89 struct regmap *regmap; 90 struct sti_pwm_compat_data *cdata; 91 struct regmap_field *prescale_low; 92 struct regmap_field *prescale_high; 93 struct regmap_field *pwm_out_en; 94 struct regmap_field *pwm_cpt_en; 95 struct regmap_field *pwm_cpt_int_en; 96 struct regmap_field *pwm_cpt_int_stat; 97 struct pwm_device *cur; 98 unsigned long configured; 99 unsigned int en_count; 100 struct mutex sti_pwm_lock; /* To sync between enable/disable calls */ 101 void __iomem *mmio; 102}; 103 104static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = { 105 [PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWM_CTRL, 0, 3), 106 [PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWM_CTRL, 11, 14), 107 [CPTCLK_PRESCALE] = REG_FIELD(STI_PWM_CTRL, 4, 8), 108 [PWM_OUT_EN] = REG_FIELD(STI_PWM_CTRL, 9, 9), 109 [PWM_CPT_EN] = REG_FIELD(STI_PWM_CTRL, 10, 10), 110 [PWM_CPT_INT_EN] = REG_FIELD(STI_INT_EN, 1, 4), 111 [PWM_CPT_INT_STAT] = REG_FIELD(STI_INT_STA, 1, 4), 112}; 113 114static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip) 115{ 116 return pwmchip_get_drvdata(chip); 117} 118 119/* 120 * Calculate the prescaler value corresponding to the period. 121 */ 122static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period, 123 unsigned int *prescale) 124{ 125 struct sti_pwm_compat_data *cdata = pc->cdata; 126 unsigned long clk_rate; 127 unsigned long value; 128 unsigned int ps; 129 130 clk_rate = clk_get_rate(pc->pwm_clk); 131 if (!clk_rate) { 132 dev_err(pc->dev, "failed to get clock rate\n"); 133 return -EINVAL; 134 } 135 136 /* 137 * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_cnt + 1)) - 1 138 */ 139 value = NSEC_PER_SEC / clk_rate; 140 value *= cdata->max_pwm_cnt + 1; 141 142 if (period % value) 143 return -EINVAL; 144 145 ps = period / value - 1; 146 if (ps > cdata->max_prescale) 147 return -EINVAL; 148 149 *prescale = ps; 150 151 return 0; 152} 153 154/* 155 * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles. The 156 * only way to change the period (apart from changing the PWM input clock) is 157 * to change the PWM clock prescaler. 158 * 159 * The prescaler is of 8 bits, so 256 prescaler values and hence 256 possible 160 * period values are supported (for a particular clock rate). The requested 161 * period will be applied only if it matches one of these 256 values. 162 */ 163static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, 164 int duty_ns, int period_ns) 165{ 166 struct sti_pwm_chip *pc = to_sti_pwmchip(chip); 167 struct sti_pwm_compat_data *cdata = pc->cdata; 168 unsigned int ncfg, value, prescale = 0; 169 struct pwm_device *cur = pc->cur; 170 struct device *dev = pc->dev; 171 bool period_same = false; 172 int ret; 173 174 ncfg = hweight_long(pc->configured); 175 if (ncfg) 176 period_same = (period_ns == pwm_get_period(cur)); 177 178 /* 179 * Allow configuration changes if one of the following conditions 180 * satisfy. 181 * 1. No devices have been configured. 182 * 2. Only one device has been configured and the new request is for 183 * the same device. 184 * 3. Only one device has been configured and the new request is for 185 * a new device and period of the new device is same as the current 186 * configured period. 187 * 4. More than one devices are configured and period of the new 188 * requestis the same as the current period. 189 */ 190 if (!ncfg || 191 ((ncfg == 1) && (pwm->hwpwm == cur->hwpwm)) || 192 ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) || 193 ((ncfg > 1) && period_same)) { 194 /* Enable clock before writing to PWM registers. */ 195 ret = clk_enable(pc->pwm_clk); 196 if (ret) 197 return ret; 198 199 ret = clk_enable(pc->cpt_clk); 200 if (ret) 201 return ret; 202 203 if (!period_same) { 204 ret = sti_pwm_get_prescale(pc, period_ns, &prescale); 205 if (ret) 206 goto clk_dis; 207 208 value = prescale & PWM_PRESCALE_LOW_MASK; 209 210 ret = regmap_field_write(pc->prescale_low, value); 211 if (ret) 212 goto clk_dis; 213 214 value = (prescale & PWM_PRESCALE_HIGH_MASK) >> 4; 215 216 ret = regmap_field_write(pc->prescale_high, value); 217 if (ret) 218 goto clk_dis; 219 } 220 221 /* 222 * When PWMVal == 0, PWM pulse = 1 local clock cycle. 223 * When PWMVal == max_pwm_count, 224 * PWM pulse = (max_pwm_count + 1) local cycles, 225 * that is continuous pulse: signal never goes low. 226 */ 227 value = cdata->max_pwm_cnt * duty_ns / period_ns; 228 229 ret = regmap_write(pc->regmap, PWM_OUT_VAL(pwm->hwpwm), value); 230 if (ret) 231 goto clk_dis; 232 233 ret = regmap_field_write(pc->pwm_cpt_int_en, 0); 234 235 set_bit(pwm->hwpwm, &pc->configured); 236 pc->cur = pwm; 237 238 dev_dbg(dev, "prescale:%u, period:%i, duty:%i, value:%u\n", 239 prescale, period_ns, duty_ns, value); 240 } else { 241 return -EINVAL; 242 } 243 244clk_dis: 245 clk_disable(pc->pwm_clk); 246 clk_disable(pc->cpt_clk); 247 return ret; 248} 249 250static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) 251{ 252 struct sti_pwm_chip *pc = to_sti_pwmchip(chip); 253 struct device *dev = pc->dev; 254 int ret = 0; 255 256 /* 257 * Since we have a common enable for all PWM devices, do not enable if 258 * already enabled. 259 */ 260 mutex_lock(&pc->sti_pwm_lock); 261 262 if (!pc->en_count) { 263 ret = clk_enable(pc->pwm_clk); 264 if (ret) 265 goto out; 266 267 ret = clk_enable(pc->cpt_clk); 268 if (ret) 269 goto out; 270 271 ret = regmap_field_write(pc->pwm_out_en, 1); 272 if (ret) { 273 dev_err(dev, "failed to enable PWM device %u: %d\n", 274 pwm->hwpwm, ret); 275 goto out; 276 } 277 } 278 279 pc->en_count++; 280 281out: 282 mutex_unlock(&pc->sti_pwm_lock); 283 return ret; 284} 285 286static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) 287{ 288 struct sti_pwm_chip *pc = to_sti_pwmchip(chip); 289 290 mutex_lock(&pc->sti_pwm_lock); 291 292 if (--pc->en_count) { 293 mutex_unlock(&pc->sti_pwm_lock); 294 return; 295 } 296 297 regmap_field_write(pc->pwm_out_en, 0); 298 299 clk_disable(pc->pwm_clk); 300 clk_disable(pc->cpt_clk); 301 302 mutex_unlock(&pc->sti_pwm_lock); 303} 304 305static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) 306{ 307 struct sti_pwm_chip *pc = to_sti_pwmchip(chip); 308 309 clear_bit(pwm->hwpwm, &pc->configured); 310} 311 312static int sti_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm, 313 struct pwm_capture *result, unsigned long timeout) 314{ 315 struct sti_pwm_chip *pc = to_sti_pwmchip(chip); 316 struct sti_pwm_compat_data *cdata = pc->cdata; 317 struct sti_cpt_ddata *ddata = &cdata->ddata[pwm->hwpwm]; 318 struct device *dev = pc->dev; 319 unsigned int effective_ticks; 320 unsigned long long high, low; 321 int ret; 322 323 if (pwm->hwpwm >= cdata->cpt_num_devs) { 324 dev_err(dev, "device %u is not valid\n", pwm->hwpwm); 325 return -EINVAL; 326 } 327 328 mutex_lock(&ddata->lock); 329 ddata->index = 0; 330 331 /* Prepare capture measurement */ 332 regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_RISING); 333 regmap_field_write(pc->pwm_cpt_int_en, BIT(pwm->hwpwm)); 334 335 /* Enable capture */ 336 ret = regmap_field_write(pc->pwm_cpt_en, 1); 337 if (ret) { 338 dev_err(dev, "failed to enable PWM capture %u: %d\n", 339 pwm->hwpwm, ret); 340 goto out; 341 } 342 343 ret = wait_event_interruptible_timeout(ddata->wait, ddata->index > 1, 344 msecs_to_jiffies(timeout)); 345 346 regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_DISABLED); 347 348 if (ret == -ERESTARTSYS) 349 goto out; 350 351 switch (ddata->index) { 352 case 0: 353 case 1: 354 /* 355 * Getting here could mean: 356 * - input signal is constant of less than 1 Hz 357 * - there is no input signal at all 358 * 359 * In such case the frequency is rounded down to 0 360 */ 361 result->period = 0; 362 result->duty_cycle = 0; 363 364 break; 365 366 case 2: 367 /* We have everying we need */ 368 high = ddata->snapshot[1] - ddata->snapshot[0]; 369 low = ddata->snapshot[2] - ddata->snapshot[1]; 370 371 effective_ticks = clk_get_rate(pc->cpt_clk); 372 373 result->period = (high + low) * NSEC_PER_SEC; 374 result->period /= effective_ticks; 375 376 result->duty_cycle = high * NSEC_PER_SEC; 377 result->duty_cycle /= effective_ticks; 378 379 break; 380 381 default: 382 dev_err(dev, "internal error\n"); 383 break; 384 } 385 386out: 387 /* Disable capture */ 388 regmap_field_write(pc->pwm_cpt_en, 0); 389 390 mutex_unlock(&ddata->lock); 391 return ret; 392} 393 394static int sti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, 395 const struct pwm_state *state) 396{ 397 struct sti_pwm_chip *pc = to_sti_pwmchip(chip); 398 struct sti_pwm_compat_data *cdata = pc->cdata; 399 struct device *dev = pc->dev; 400 int err; 401 402 if (pwm->hwpwm >= cdata->pwm_num_devs) { 403 dev_err(dev, "device %u is not valid for pwm mode\n", 404 pwm->hwpwm); 405 return -EINVAL; 406 } 407 408 if (state->polarity != PWM_POLARITY_NORMAL) 409 return -EINVAL; 410 411 if (!state->enabled) { 412 if (pwm->state.enabled) 413 sti_pwm_disable(chip, pwm); 414 415 return 0; 416 } 417 418 err = sti_pwm_config(chip, pwm, state->duty_cycle, state->period); 419 if (err) 420 return err; 421 422 if (!pwm->state.enabled) 423 err = sti_pwm_enable(chip, pwm); 424 425 return err; 426} 427 428static const struct pwm_ops sti_pwm_ops = { 429 .capture = sti_pwm_capture, 430 .apply = sti_pwm_apply, 431 .free = sti_pwm_free, 432}; 433 434static irqreturn_t sti_pwm_interrupt(int irq, void *data) 435{ 436 struct sti_pwm_chip *pc = data; 437 struct device *dev = pc->dev; 438 struct sti_cpt_ddata *ddata; 439 int devicenum; 440 unsigned int cpt_int_stat; 441 unsigned int reg; 442 int ret = IRQ_NONE; 443 444 ret = regmap_field_read(pc->pwm_cpt_int_stat, &cpt_int_stat); 445 if (ret) 446 return ret; 447 448 while (cpt_int_stat) { 449 devicenum = ffs(cpt_int_stat) - 1; 450 451 ddata = &pc->cdata->ddata[devicenum]; 452 453 /* 454 * Capture input: 455 * _______ _______ 456 * | | | | 457 * __| |_________________| |________ 458 * ^0 ^1 ^2 459 * 460 * Capture start by the first available rising edge. When a 461 * capture event occurs, capture value (CPT_VALx) is stored, 462 * index incremented, capture edge changed. 463 * 464 * After the capture, if the index > 1, we have collected the 465 * necessary data so we signal the thread waiting for it and 466 * disable the capture by setting capture edge to none 467 */ 468 469 regmap_read(pc->regmap, 470 PWM_CPT_VAL(devicenum), 471 &ddata->snapshot[ddata->index]); 472 473 switch (ddata->index) { 474 case 0: 475 case 1: 476 regmap_read(pc->regmap, PWM_CPT_EDGE(devicenum), ®); 477 reg ^= PWM_CPT_EDGE_MASK; 478 regmap_write(pc->regmap, PWM_CPT_EDGE(devicenum), reg); 479 480 ddata->index++; 481 break; 482 483 case 2: 484 regmap_write(pc->regmap, 485 PWM_CPT_EDGE(devicenum), 486 CPT_EDGE_DISABLED); 487 wake_up(&ddata->wait); 488 break; 489 490 default: 491 dev_err(dev, "Internal error\n"); 492 } 493 494 cpt_int_stat &= ~BIT_MASK(devicenum); 495 496 ret = IRQ_HANDLED; 497 } 498 499 /* Just ACK everything */ 500 regmap_write(pc->regmap, PWM_INT_ACK, PWM_INT_ACK_MASK); 501 502 return ret; 503} 504 505static int sti_pwm_probe_dt(struct sti_pwm_chip *pc) 506{ 507 struct device *dev = pc->dev; 508 const struct reg_field *reg_fields; 509 struct sti_pwm_compat_data *cdata = pc->cdata; 510 511 reg_fields = cdata->reg_fields; 512 513 pc->prescale_low = devm_regmap_field_alloc(dev, pc->regmap, 514 reg_fields[PWMCLK_PRESCALE_LOW]); 515 if (IS_ERR(pc->prescale_low)) 516 return PTR_ERR(pc->prescale_low); 517 518 pc->prescale_high = devm_regmap_field_alloc(dev, pc->regmap, 519 reg_fields[PWMCLK_PRESCALE_HIGH]); 520 if (IS_ERR(pc->prescale_high)) 521 return PTR_ERR(pc->prescale_high); 522 523 pc->pwm_out_en = devm_regmap_field_alloc(dev, pc->regmap, 524 reg_fields[PWM_OUT_EN]); 525 if (IS_ERR(pc->pwm_out_en)) 526 return PTR_ERR(pc->pwm_out_en); 527 528 pc->pwm_cpt_en = devm_regmap_field_alloc(dev, pc->regmap, 529 reg_fields[PWM_CPT_EN]); 530 if (IS_ERR(pc->pwm_cpt_en)) 531 return PTR_ERR(pc->pwm_cpt_en); 532 533 pc->pwm_cpt_int_en = devm_regmap_field_alloc(dev, pc->regmap, 534 reg_fields[PWM_CPT_INT_EN]); 535 if (IS_ERR(pc->pwm_cpt_int_en)) 536 return PTR_ERR(pc->pwm_cpt_int_en); 537 538 pc->pwm_cpt_int_stat = devm_regmap_field_alloc(dev, pc->regmap, 539 reg_fields[PWM_CPT_INT_STAT]); 540 if (PTR_ERR_OR_ZERO(pc->pwm_cpt_int_stat)) 541 return PTR_ERR(pc->pwm_cpt_int_stat); 542 543 return 0; 544} 545 546static const struct regmap_config sti_pwm_regmap_config = { 547 .reg_bits = 32, 548 .val_bits = 32, 549 .reg_stride = 4, 550}; 551 552static int sti_pwm_probe(struct platform_device *pdev) 553{ 554 struct device *dev = &pdev->dev; 555 struct device_node *np = dev->of_node; 556 u32 num_devs; 557 unsigned int pwm_num_devs = 0; 558 unsigned int cpt_num_devs = 0; 559 struct sti_pwm_compat_data *cdata; 560 struct pwm_chip *chip; 561 struct sti_pwm_chip *pc; 562 unsigned int i; 563 int irq, ret; 564 565 ret = of_property_read_u32(np, "st,pwm-num-chan", &num_devs); 566 if (!ret) 567 pwm_num_devs = num_devs; 568 569 ret = of_property_read_u32(np, "st,capture-num-chan", &num_devs); 570 if (!ret) 571 cpt_num_devs = num_devs; 572 573 if (!pwm_num_devs && !cpt_num_devs) { 574 dev_err(dev, "No channels configured\n"); 575 return -EINVAL; 576 } 577 578 chip = devm_pwmchip_alloc(dev, max(pwm_num_devs, cpt_num_devs), sizeof(*pc)); 579 if (IS_ERR(chip)) 580 return PTR_ERR(chip); 581 pc = to_sti_pwmchip(chip); 582 583 cdata = devm_kzalloc(dev, sizeof(*cdata), GFP_KERNEL); 584 if (!cdata) 585 return -ENOMEM; 586 587 pc->mmio = devm_platform_ioremap_resource(pdev, 0); 588 if (IS_ERR(pc->mmio)) 589 return PTR_ERR(pc->mmio); 590 591 pc->regmap = devm_regmap_init_mmio(dev, pc->mmio, 592 &sti_pwm_regmap_config); 593 if (IS_ERR(pc->regmap)) 594 return PTR_ERR(pc->regmap); 595 596 irq = platform_get_irq(pdev, 0); 597 if (irq < 0) 598 return irq; 599 600 ret = devm_request_irq(&pdev->dev, irq, sti_pwm_interrupt, 0, 601 pdev->name, pc); 602 if (ret < 0) { 603 dev_err(&pdev->dev, "Failed to request IRQ\n"); 604 return ret; 605 } 606 607 /* 608 * Setup PWM data with default values: some values could be replaced 609 * with specific ones provided from Device Tree. 610 */ 611 cdata->reg_fields = sti_pwm_regfields; 612 cdata->max_prescale = 0xff; 613 cdata->max_pwm_cnt = 255; 614 cdata->pwm_num_devs = pwm_num_devs; 615 cdata->cpt_num_devs = cpt_num_devs; 616 617 pc->cdata = cdata; 618 pc->dev = dev; 619 pc->en_count = 0; 620 mutex_init(&pc->sti_pwm_lock); 621 622 ret = sti_pwm_probe_dt(pc); 623 if (ret) 624 return ret; 625 626 if (cdata->pwm_num_devs) { 627 pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm"); 628 if (IS_ERR(pc->pwm_clk)) { 629 dev_err(dev, "failed to get PWM clock\n"); 630 return PTR_ERR(pc->pwm_clk); 631 } 632 633 ret = clk_prepare(pc->pwm_clk); 634 if (ret) { 635 dev_err(dev, "failed to prepare clock\n"); 636 return ret; 637 } 638 } 639 640 if (cdata->cpt_num_devs) { 641 pc->cpt_clk = of_clk_get_by_name(dev->of_node, "capture"); 642 if (IS_ERR(pc->cpt_clk)) { 643 dev_err(dev, "failed to get PWM capture clock\n"); 644 return PTR_ERR(pc->cpt_clk); 645 } 646 647 ret = clk_prepare(pc->cpt_clk); 648 if (ret) { 649 dev_err(dev, "failed to prepare clock\n"); 650 return ret; 651 } 652 653 cdata->ddata = devm_kzalloc(dev, cdata->cpt_num_devs * sizeof(*cdata->ddata), GFP_KERNEL); 654 if (!cdata->ddata) 655 return -ENOMEM; 656 } 657 658 chip->ops = &sti_pwm_ops; 659 660 for (i = 0; i < cdata->cpt_num_devs; i++) { 661 struct sti_cpt_ddata *ddata = &cdata->ddata[i]; 662 663 init_waitqueue_head(&ddata->wait); 664 mutex_init(&ddata->lock); 665 } 666 667 ret = pwmchip_add(chip); 668 if (ret < 0) { 669 clk_unprepare(pc->pwm_clk); 670 clk_unprepare(pc->cpt_clk); 671 return ret; 672 } 673 674 platform_set_drvdata(pdev, chip); 675 676 return 0; 677} 678 679static void sti_pwm_remove(struct platform_device *pdev) 680{ 681 struct pwm_chip *chip = platform_get_drvdata(pdev); 682 struct sti_pwm_chip *pc = to_sti_pwmchip(chip); 683 684 pwmchip_remove(chip); 685 686 clk_unprepare(pc->pwm_clk); 687 clk_unprepare(pc->cpt_clk); 688} 689 690static const struct of_device_id sti_pwm_of_match[] = { 691 { .compatible = "st,sti-pwm", }, 692 { /* sentinel */ } 693}; 694MODULE_DEVICE_TABLE(of, sti_pwm_of_match); 695 696static struct platform_driver sti_pwm_driver = { 697 .driver = { 698 .name = "sti-pwm", 699 .of_match_table = sti_pwm_of_match, 700 }, 701 .probe = sti_pwm_probe, 702 .remove_new = sti_pwm_remove, 703}; 704module_platform_driver(sti_pwm_driver); 705 706MODULE_AUTHOR("Ajit Pal Singh <ajitpal.singh@st.com>"); 707MODULE_DESCRIPTION("STMicroelectronics ST PWM driver"); 708MODULE_LICENSE("GPL"); 709