1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Keyboard backlight LED driver for the Wilco Embedded Controller
4 *
5 * Copyright 2019 Google LLC
6 *
7 * Since the EC will never change the backlight level of its own accord,
8 * we don't need to implement a brightness_get() method.
9 */
10
11#include <linux/device.h>
12#include <linux/kernel.h>
13#include <linux/leds.h>
14#include <linux/platform_data/wilco-ec.h>
15#include <linux/slab.h>
16
17#define WILCO_EC_COMMAND_KBBL		0x75
18#define WILCO_KBBL_MODE_FLAG_PWM	BIT(1)	/* Set brightness by percent. */
19#define WILCO_KBBL_DEFAULT_BRIGHTNESS   0
20
21struct wilco_keyboard_leds {
22	struct wilco_ec_device *ec;
23	struct led_classdev keyboard;
24};
25
26enum wilco_kbbl_subcommand {
27	WILCO_KBBL_SUBCMD_GET_FEATURES = 0x00,
28	WILCO_KBBL_SUBCMD_GET_STATE    = 0x01,
29	WILCO_KBBL_SUBCMD_SET_STATE    = 0x02,
30};
31
32/**
33 * struct wilco_keyboard_leds_msg - Message to/from EC for keyboard LED control.
34 * @command: Always WILCO_EC_COMMAND_KBBL.
35 * @status: Set by EC to 0 on success, 0xFF on failure.
36 * @subcmd: One of enum wilco_kbbl_subcommand.
37 * @reserved3: Should be 0.
38 * @mode: Bit flags for used mode, we want to use WILCO_KBBL_MODE_FLAG_PWM.
39 * @reserved5to8: Should be 0.
40 * @percent: Brightness in 0-100. Only meaningful in PWM mode.
41 * @reserved10to15: Should be 0.
42 */
43struct wilco_keyboard_leds_msg {
44	u8 command;
45	u8 status;
46	u8 subcmd;
47	u8 reserved3;
48	u8 mode;
49	u8 reserved5to8[4];
50	u8 percent;
51	u8 reserved10to15[6];
52} __packed;
53
54/* Send a request, get a response, and check that the response is good. */
55static int send_kbbl_msg(struct wilco_ec_device *ec,
56			 struct wilco_keyboard_leds_msg *request,
57			 struct wilco_keyboard_leds_msg *response)
58{
59	struct wilco_ec_message msg;
60	int ret;
61
62	memset(&msg, 0, sizeof(msg));
63	msg.type = WILCO_EC_MSG_LEGACY;
64	msg.request_data = request;
65	msg.request_size = sizeof(*request);
66	msg.response_data = response;
67	msg.response_size = sizeof(*response);
68
69	ret = wilco_ec_mailbox(ec, &msg);
70	if (ret < 0) {
71		dev_err(ec->dev,
72			"Failed sending keyboard LEDs command: %d\n", ret);
73		return ret;
74	}
75
76	return 0;
77}
78
79static int set_kbbl(struct wilco_ec_device *ec, enum led_brightness brightness)
80{
81	struct wilco_keyboard_leds_msg request;
82	struct wilco_keyboard_leds_msg response;
83	int ret;
84
85	memset(&request, 0, sizeof(request));
86	request.command = WILCO_EC_COMMAND_KBBL;
87	request.subcmd  = WILCO_KBBL_SUBCMD_SET_STATE;
88	request.mode    = WILCO_KBBL_MODE_FLAG_PWM;
89	request.percent = brightness;
90
91	ret = send_kbbl_msg(ec, &request, &response);
92	if (ret < 0)
93		return ret;
94
95	if (response.status) {
96		dev_err(ec->dev,
97			"EC reported failure sending keyboard LEDs command: %d\n",
98			response.status);
99		return -EIO;
100	}
101
102	return 0;
103}
104
105static int kbbl_exist(struct wilco_ec_device *ec, bool *exists)
106{
107	struct wilco_keyboard_leds_msg request;
108	struct wilco_keyboard_leds_msg response;
109	int ret;
110
111	memset(&request, 0, sizeof(request));
112	request.command = WILCO_EC_COMMAND_KBBL;
113	request.subcmd  = WILCO_KBBL_SUBCMD_GET_FEATURES;
114
115	ret = send_kbbl_msg(ec, &request, &response);
116	if (ret < 0)
117		return ret;
118
119	*exists = response.status != 0xFF;
120
121	return 0;
122}
123
124/**
125 * kbbl_init() - Initialize the state of the keyboard backlight.
126 * @ec: EC device to talk to.
127 *
128 * Gets the current brightness, ensuring that the BIOS already initialized the
129 * backlight to PWM mode. If not in PWM mode, then the current brightness is
130 * meaningless, so set the brightness to WILCO_KBBL_DEFAULT_BRIGHTNESS.
131 *
132 * Return: Final brightness of the keyboard, or negative error code on failure.
133 */
134static int kbbl_init(struct wilco_ec_device *ec)
135{
136	struct wilco_keyboard_leds_msg request;
137	struct wilco_keyboard_leds_msg response;
138	int ret;
139
140	memset(&request, 0, sizeof(request));
141	request.command = WILCO_EC_COMMAND_KBBL;
142	request.subcmd  = WILCO_KBBL_SUBCMD_GET_STATE;
143
144	ret = send_kbbl_msg(ec, &request, &response);
145	if (ret < 0)
146		return ret;
147
148	if (response.status) {
149		dev_err(ec->dev,
150			"EC reported failure sending keyboard LEDs command: %d\n",
151			response.status);
152		return -EIO;
153	}
154
155	if (response.mode & WILCO_KBBL_MODE_FLAG_PWM)
156		return response.percent;
157
158	ret = set_kbbl(ec, WILCO_KBBL_DEFAULT_BRIGHTNESS);
159	if (ret < 0)
160		return ret;
161
162	return WILCO_KBBL_DEFAULT_BRIGHTNESS;
163}
164
165static int wilco_keyboard_leds_set(struct led_classdev *cdev,
166				   enum led_brightness brightness)
167{
168	struct wilco_keyboard_leds *wkl =
169		container_of(cdev, struct wilco_keyboard_leds, keyboard);
170	return set_kbbl(wkl->ec, brightness);
171}
172
173int wilco_keyboard_leds_init(struct wilco_ec_device *ec)
174{
175	struct wilco_keyboard_leds *wkl;
176	bool leds_exist;
177	int ret;
178
179	ret = kbbl_exist(ec, &leds_exist);
180	if (ret < 0) {
181		dev_err(ec->dev,
182			"Failed checking keyboard LEDs support: %d\n", ret);
183		return ret;
184	}
185	if (!leds_exist)
186		return 0;
187
188	wkl = devm_kzalloc(ec->dev, sizeof(*wkl), GFP_KERNEL);
189	if (!wkl)
190		return -ENOMEM;
191
192	wkl->ec = ec;
193	wkl->keyboard.name = "platform::kbd_backlight";
194	wkl->keyboard.max_brightness = 100;
195	wkl->keyboard.flags = LED_CORE_SUSPENDRESUME;
196	wkl->keyboard.brightness_set_blocking = wilco_keyboard_leds_set;
197	ret = kbbl_init(ec);
198	if (ret < 0)
199		return ret;
200	wkl->keyboard.brightness = ret;
201
202	return devm_led_classdev_register(ec->dev, &wkl->keyboard);
203}
204