1/* 2 * Pinctrl driver for NXP LPC18xx/LPC43xx System Control Unit (SCU) 3 * 4 * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> 5 * 6 * This file is licensed under the terms of the GNU General Public 7 * License version 2. This program is licensed "as is" without any 8 * warranty of any kind, whether express or implied. 9 */ 10 11#include <linux/bitops.h> 12#include <linux/clk.h> 13#include <linux/init.h> 14#include <linux/io.h> 15#include <linux/mod_devicetable.h> 16#include <linux/platform_device.h> 17 18#include <linux/pinctrl/pinconf-generic.h> 19#include <linux/pinctrl/pinconf.h> 20#include <linux/pinctrl/pinctrl.h> 21#include <linux/pinctrl/pinmux.h> 22 23#include "core.h" 24#include "pinctrl-utils.h" 25 26/* LPC18XX SCU analog function registers */ 27#define LPC18XX_SCU_REG_ENAIO0 0xc88 28#define LPC18XX_SCU_REG_ENAIO1 0xc8c 29#define LPC18XX_SCU_REG_ENAIO2 0xc90 30#define LPC18XX_SCU_REG_ENAIO2_DAC BIT(0) 31 32/* LPC18XX SCU pin register definitions */ 33#define LPC18XX_SCU_PIN_MODE_MASK 0x7 34#define LPC18XX_SCU_PIN_EPD BIT(3) 35#define LPC18XX_SCU_PIN_EPUN BIT(4) 36#define LPC18XX_SCU_PIN_EHS BIT(5) 37#define LPC18XX_SCU_PIN_EZI BIT(6) 38#define LPC18XX_SCU_PIN_ZIF BIT(7) 39#define LPC18XX_SCU_PIN_EHD_MASK 0x300 40#define LPC18XX_SCU_PIN_EHD_POS 8 41 42#define LPC18XX_SCU_USB1_EPD BIT(2) 43#define LPC18XX_SCU_USB1_EPWR BIT(4) 44 45#define LPC18XX_SCU_I2C0_EFP BIT(0) 46#define LPC18XX_SCU_I2C0_EHD BIT(2) 47#define LPC18XX_SCU_I2C0_EZI BIT(3) 48#define LPC18XX_SCU_I2C0_ZIF BIT(7) 49#define LPC18XX_SCU_I2C0_SCL_SHIFT 0 50#define LPC18XX_SCU_I2C0_SDA_SHIFT 8 51 52#define LPC18XX_SCU_FUNC_PER_PIN 8 53 54/* LPC18XX SCU pin interrupt select registers */ 55#define LPC18XX_SCU_PINTSEL0 0xe00 56#define LPC18XX_SCU_PINTSEL1 0xe04 57#define LPC18XX_SCU_PINTSEL_VAL_MASK 0xff 58#define LPC18XX_SCU_PINTSEL_PORT_SHIFT 5 59#define LPC18XX_SCU_IRQ_PER_PINTSEL 4 60#define LPC18XX_GPIO_PINS_PER_PORT 32 61#define LPC18XX_GPIO_PIN_INT_MAX 8 62 63#define LPC18XX_SCU_PINTSEL_VAL(val, n) \ 64 ((val) << (((n) % LPC18XX_SCU_IRQ_PER_PINTSEL) * 8)) 65 66/* LPC18xx pin types */ 67enum { 68 TYPE_ND, /* Normal-drive */ 69 TYPE_HD, /* High-drive */ 70 TYPE_HS, /* High-speed */ 71 TYPE_I2C0, 72 TYPE_USB1, 73}; 74 75/* LPC18xx pin functions */ 76enum { 77 FUNC_R, /* Reserved */ 78 FUNC_ADC, 79 FUNC_ADCTRIG, 80 FUNC_CAN0, 81 FUNC_CAN1, 82 FUNC_CGU_OUT, 83 FUNC_CLKIN, 84 FUNC_CLKOUT, 85 FUNC_CTIN, 86 FUNC_CTOUT, 87 FUNC_DAC, 88 FUNC_EMC, 89 FUNC_EMC_ALT, 90 FUNC_ENET, 91 FUNC_ENET_ALT, 92 FUNC_GPIO, 93 FUNC_I2C0, 94 FUNC_I2C1, 95 FUNC_I2S0_RX_MCLK, 96 FUNC_I2S0_RX_SCK, 97 FUNC_I2S0_RX_SDA, 98 FUNC_I2S0_RX_WS, 99 FUNC_I2S0_TX_MCLK, 100 FUNC_I2S0_TX_SCK, 101 FUNC_I2S0_TX_SDA, 102 FUNC_I2S0_TX_WS, 103 FUNC_I2S1, 104 FUNC_LCD, 105 FUNC_LCD_ALT, 106 FUNC_MCTRL, 107 FUNC_NMI, 108 FUNC_QEI, 109 FUNC_SDMMC, 110 FUNC_SGPIO, 111 FUNC_SPI, 112 FUNC_SPIFI, 113 FUNC_SSP0, 114 FUNC_SSP0_ALT, 115 FUNC_SSP1, 116 FUNC_TIMER0, 117 FUNC_TIMER1, 118 FUNC_TIMER2, 119 FUNC_TIMER3, 120 FUNC_TRACE, 121 FUNC_UART0, 122 FUNC_UART1, 123 FUNC_UART2, 124 FUNC_UART3, 125 FUNC_USB0, 126 FUNC_USB1, 127 FUNC_MAX 128}; 129 130static const char *const lpc18xx_function_names[] = { 131 [FUNC_R] = "reserved", 132 [FUNC_ADC] = "adc", 133 [FUNC_ADCTRIG] = "adctrig", 134 [FUNC_CAN0] = "can0", 135 [FUNC_CAN1] = "can1", 136 [FUNC_CGU_OUT] = "cgu_out", 137 [FUNC_CLKIN] = "clkin", 138 [FUNC_CLKOUT] = "clkout", 139 [FUNC_CTIN] = "ctin", 140 [FUNC_CTOUT] = "ctout", 141 [FUNC_DAC] = "dac", 142 [FUNC_EMC] = "emc", 143 [FUNC_EMC_ALT] = "emc_alt", 144 [FUNC_ENET] = "enet", 145 [FUNC_ENET_ALT] = "enet_alt", 146 [FUNC_GPIO] = "gpio", 147 [FUNC_I2C0] = "i2c0", 148 [FUNC_I2C1] = "i2c1", 149 [FUNC_I2S0_RX_MCLK] = "i2s0_rx_mclk", 150 [FUNC_I2S0_RX_SCK] = "i2s0_rx_sck", 151 [FUNC_I2S0_RX_SDA] = "i2s0_rx_sda", 152 [FUNC_I2S0_RX_WS] = "i2s0_rx_ws", 153 [FUNC_I2S0_TX_MCLK] = "i2s0_tx_mclk", 154 [FUNC_I2S0_TX_SCK] = "i2s0_tx_sck", 155 [FUNC_I2S0_TX_SDA] = "i2s0_tx_sda", 156 [FUNC_I2S0_TX_WS] = "i2s0_tx_ws", 157 [FUNC_I2S1] = "i2s1", 158 [FUNC_LCD] = "lcd", 159 [FUNC_LCD_ALT] = "lcd_alt", 160 [FUNC_MCTRL] = "mctrl", 161 [FUNC_NMI] = "nmi", 162 [FUNC_QEI] = "qei", 163 [FUNC_SDMMC] = "sdmmc", 164 [FUNC_SGPIO] = "sgpio", 165 [FUNC_SPI] = "spi", 166 [FUNC_SPIFI] = "spifi", 167 [FUNC_SSP0] = "ssp0", 168 [FUNC_SSP0_ALT] = "ssp0_alt", 169 [FUNC_SSP1] = "ssp1", 170 [FUNC_TIMER0] = "timer0", 171 [FUNC_TIMER1] = "timer1", 172 [FUNC_TIMER2] = "timer2", 173 [FUNC_TIMER3] = "timer3", 174 [FUNC_TRACE] = "trace", 175 [FUNC_UART0] = "uart0", 176 [FUNC_UART1] = "uart1", 177 [FUNC_UART2] = "uart2", 178 [FUNC_UART3] = "uart3", 179 [FUNC_USB0] = "usb0", 180 [FUNC_USB1] = "usb1", 181}; 182 183struct lpc18xx_pmx_func { 184 const char **groups; 185 unsigned ngroups; 186}; 187 188struct lpc18xx_scu_data { 189 struct pinctrl_dev *pctl; 190 void __iomem *base; 191 struct clk *clk; 192 struct lpc18xx_pmx_func func[FUNC_MAX]; 193}; 194 195struct lpc18xx_pin_caps { 196 unsigned int offset; 197 unsigned char functions[LPC18XX_SCU_FUNC_PER_PIN]; 198 unsigned char analog; 199 unsigned char type; 200}; 201 202/* Analog pins are required to have both bias and input disabled */ 203#define LPC18XX_SCU_ANALOG_PIN_CFG 0x10 204 205/* Macros to maniupluate analog member in lpc18xx_pin_caps */ 206#define LPC18XX_ANALOG_PIN BIT(7) 207#define LPC18XX_ANALOG_ADC(a) ((a >> 5) & 0x3) 208#define LPC18XX_ANALOG_BIT_MASK 0x1f 209#define ADC0 (LPC18XX_ANALOG_PIN | (0x00 << 5)) 210#define ADC1 (LPC18XX_ANALOG_PIN | (0x01 << 5)) 211#define DAC LPC18XX_ANALOG_PIN 212 213#define LPC_P(port, pin, f0, f1, f2, f3, f4, f5, f6, f7, a, t) \ 214static struct lpc18xx_pin_caps lpc18xx_pin_p##port##_##pin = { \ 215 .offset = 0x##port * 32 * 4 + pin * 4, \ 216 .functions = { \ 217 FUNC_##f0, FUNC_##f1, FUNC_##f2, \ 218 FUNC_##f3, FUNC_##f4, FUNC_##f5, \ 219 FUNC_##f6, FUNC_##f7, \ 220 }, \ 221 .analog = a, \ 222 .type = TYPE_##t, \ 223} 224 225#define LPC_N(pname, off, f0, f1, f2, f3, f4, f5, f6, f7, a, t) \ 226static struct lpc18xx_pin_caps lpc18xx_pin_##pname = { \ 227 .offset = off, \ 228 .functions = { \ 229 FUNC_##f0, FUNC_##f1, FUNC_##f2, \ 230 FUNC_##f3, FUNC_##f4, FUNC_##f5, \ 231 FUNC_##f6, FUNC_##f7, \ 232 }, \ 233 .analog = a, \ 234 .type = TYPE_##t, \ 235} 236 237 238/* Pinmuxing table taken from data sheet */ 239/* Pin FUNC0 FUNC1 FUNC2 FUNC3 FUNC4 FUNC5 FUNC6 FUNC7 ANALOG TYPE */ 240LPC_P(0,0, GPIO, SSP1, ENET, SGPIO, R, R, I2S0_TX_WS,I2S1, 0, ND); 241LPC_P(0,1, GPIO, SSP1,ENET_ALT,SGPIO, R, R, ENET, I2S1, 0, ND); 242LPC_P(1,0, GPIO, CTIN, EMC, R, R, SSP0, SGPIO, R, 0, ND); 243LPC_P(1,1, GPIO, CTOUT, EMC, SGPIO, R, SSP0, R, R, 0, ND); 244LPC_P(1,2, GPIO, CTOUT, EMC, SGPIO, R, SSP0, R, R, 0, ND); 245LPC_P(1,3, GPIO, CTOUT, SGPIO, EMC, USB0, SSP1, R, SDMMC, 0, ND); 246LPC_P(1,4, GPIO, CTOUT, SGPIO, EMC, USB0, SSP1, R, SDMMC, 0, ND); 247LPC_P(1,5, GPIO, CTOUT, R, EMC, USB0, SSP1, SGPIO, SDMMC, 0, ND); 248LPC_P(1,6, GPIO, CTIN, R, EMC, R, R, SGPIO, SDMMC, 0, ND); 249LPC_P(1,7, GPIO, UART1, CTOUT, EMC, USB0, R, R, R, 0, ND); 250LPC_P(1,8, GPIO, UART1, CTOUT, EMC, R, R, R, SDMMC, 0, ND); 251LPC_P(1,9, GPIO, UART1, CTOUT, EMC, R, R, R, SDMMC, 0, ND); 252LPC_P(1,10, GPIO, UART1, CTOUT, EMC, R, R, R, SDMMC, 0, ND); 253LPC_P(1,11, GPIO, UART1, CTOUT, EMC, R, R, R, SDMMC, 0, ND); 254LPC_P(1,12, GPIO, UART1, R, EMC, TIMER0, R, SGPIO, SDMMC, 0, ND); 255LPC_P(1,13, GPIO, UART1, R, EMC, TIMER0, R, SGPIO, SDMMC, 0, ND); 256LPC_P(1,14, GPIO, UART1, R, EMC, TIMER0, R, SGPIO, R, 0, ND); 257LPC_P(1,15, GPIO, UART2, SGPIO, ENET, TIMER0, R, R, R, 0, ND); 258LPC_P(1,16, GPIO, UART2, SGPIO,ENET_ALT,TIMER0, R, R, ENET, 0, ND); 259LPC_P(1,17, GPIO, UART2, R, ENET, TIMER0, CAN1, SGPIO, R, 0, HD); 260LPC_P(1,18, GPIO, UART2, R, ENET, TIMER0, CAN1, SGPIO, R, 0, ND); 261LPC_P(1,19, ENET, SSP1, R, R, CLKOUT, R, I2S0_RX_MCLK,I2S1, 0, ND); 262LPC_P(1,20, GPIO, SSP1, R, ENET, TIMER0, R, SGPIO, R, 0, ND); 263LPC_P(2,0, SGPIO, UART0, EMC, USB0, GPIO, R, TIMER3, ENET, 0, ND); 264LPC_P(2,1, SGPIO, UART0, EMC, USB0, GPIO, R, TIMER3, R, 0, ND); 265LPC_P(2,2, SGPIO, UART0, EMC, USB0, GPIO, CTIN, TIMER3, R, 0, ND); 266LPC_P(2,3, SGPIO, I2C1, UART3, CTIN, GPIO, R, TIMER3, USB0, 0, HD); 267LPC_P(2,4, SGPIO, I2C1, UART3, CTIN, GPIO, R, TIMER3, USB0, 0, HD); 268LPC_P(2,5, SGPIO, CTIN, USB1, ADCTRIG, GPIO, R, TIMER3, USB0, 0, HD); 269LPC_P(2,6, SGPIO, UART0, EMC, USB0, GPIO, CTIN, TIMER3, R, 0, ND); 270LPC_P(2,7, GPIO, CTOUT, UART3, EMC, R, R, TIMER3, R, 0, ND); 271LPC_P(2,8, SGPIO, CTOUT, UART3, EMC, GPIO, R, R, R, 0, ND); 272LPC_P(2,9, GPIO, CTOUT, UART3, EMC, R, R, R, R, 0, ND); 273LPC_P(2,10, GPIO, CTOUT, UART2, EMC, R, R, R, R, 0, ND); 274LPC_P(2,11, GPIO, CTOUT, UART2, EMC, R, R, R, R, 0, ND); 275LPC_P(2,12, GPIO, CTOUT, R, EMC, R, R, R, UART2, 0, ND); 276LPC_P(2,13, GPIO, CTIN, R, EMC, R, R, R, UART2, 0, ND); 277LPC_P(3,0, I2S0_RX_SCK, I2S0_RX_MCLK, I2S0_TX_SCK, I2S0_TX_MCLK,SSP0,R,R,R, 0, ND); 278LPC_P(3,1, I2S0_TX_WS, I2S0_RX_WS,CAN0,USB1,GPIO, R, LCD, R, 0, ND); 279LPC_P(3,2, I2S0_TX_SDA, I2S0_RX_SDA,CAN0,USB1,GPIO, R, LCD, R, 0, ND); 280LPC_P(3,3, R, SPI, SSP0, SPIFI, CGU_OUT,R, I2S0_TX_MCLK, I2S1, 0, HS); 281LPC_P(3,4, GPIO, R, R, SPIFI, UART1, I2S0_TX_WS, I2S1, LCD, 0, ND); 282LPC_P(3,5, GPIO, R, R, SPIFI, UART1, I2S0_TX_SDA,I2S1, LCD, 0, ND); 283LPC_P(3,6, GPIO, SPI, SSP0, SPIFI, R, SSP0_ALT, R, R, 0, ND); 284LPC_P(3,7, R, SPI, SSP0, SPIFI, GPIO, SSP0_ALT, R, R, 0, ND); 285LPC_P(3,8, R, SPI, SSP0, SPIFI, GPIO, SSP0_ALT, R, R, 0, ND); 286LPC_P(4,0, GPIO, MCTRL, NMI, R, R, LCD, UART3, R, 0, ND); 287LPC_P(4,1, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, ENET, ADC0|1, ND); 288LPC_P(4,2, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, SGPIO, 0, ND); 289LPC_P(4,3, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, SGPIO, ADC0|0, ND); 290LPC_P(4,4, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, SGPIO, DAC, ND); 291LPC_P(4,5, GPIO, CTOUT, LCD, R, R, R, R, SGPIO, 0, ND); 292LPC_P(4,6, GPIO, CTOUT, LCD, R, R, R, R, SGPIO, 0, ND); 293LPC_P(4,7, LCD, CLKIN, R, R, R, R, I2S1,I2S0_TX_SCK, 0, ND); 294LPC_P(4,8, R, CTIN, LCD, R, GPIO, LCD_ALT, CAN1, SGPIO, 0, ND); 295LPC_P(4,9, R, CTIN, LCD, R, GPIO, LCD_ALT, CAN1, SGPIO, 0, ND); 296LPC_P(4,10, R, CTIN, LCD, R, GPIO, LCD_ALT, R, SGPIO, 0, ND); 297LPC_P(5,0, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); 298LPC_P(5,1, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); 299LPC_P(5,2, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); 300LPC_P(5,3, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); 301LPC_P(5,4, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); 302LPC_P(5,5, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); 303LPC_P(5,6, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); 304LPC_P(5,7, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); 305LPC_P(6,0, R, I2S0_RX_MCLK,R, R, I2S0_RX_SCK, R, R, R, 0, ND); 306LPC_P(6,1, GPIO, EMC, UART0, I2S0_RX_WS, R, TIMER2, R, R, 0, ND); 307LPC_P(6,2, GPIO, EMC, UART0, I2S0_RX_SDA, R, TIMER2, R, R, 0, ND); 308LPC_P(6,3, GPIO, USB0, SGPIO, EMC, R, TIMER2, R, R, 0, ND); 309LPC_P(6,4, GPIO, CTIN, UART0, EMC, R, R, R, R, 0, ND); 310LPC_P(6,5, GPIO, CTOUT, UART0, EMC, R, R, R, R, 0, ND); 311LPC_P(6,6, GPIO, EMC, SGPIO, USB0, R, TIMER2, R, R, 0, ND); 312LPC_P(6,7, R, EMC, SGPIO, USB0, GPIO, TIMER2, R, R, 0, ND); 313LPC_P(6,8, R, EMC, SGPIO, USB0, GPIO, TIMER2, R, R, 0, ND); 314LPC_P(6,9, GPIO, R, R, EMC, R, TIMER2, R, R, 0, ND); 315LPC_P(6,10, GPIO, MCTRL, R, EMC, R, R, R, R, 0, ND); 316LPC_P(6,11, GPIO, R, R, EMC, R, TIMER2, R, R, 0, ND); 317LPC_P(6,12, GPIO, CTOUT, R, EMC, R, R, R, R, 0, ND); 318LPC_P(7,0, GPIO, CTOUT, R, LCD, R, R, R, SGPIO, 0, ND); 319LPC_P(7,1, GPIO, CTOUT,I2S0_TX_WS,LCD,LCD_ALT, R, UART2, SGPIO, 0, ND); 320LPC_P(7,2, GPIO, CTIN,I2S0_TX_SDA,LCD,LCD_ALT, R, UART2, SGPIO, 0, ND); 321LPC_P(7,3, GPIO, CTIN, R, LCD,LCD_ALT, R, R, R, 0, ND); 322LPC_P(7,4, GPIO, CTOUT, R, LCD,LCD_ALT, TRACE, R, R, ADC0|4, ND); 323LPC_P(7,5, GPIO, CTOUT, R, LCD,LCD_ALT, TRACE, R, R, ADC0|3, ND); 324LPC_P(7,6, GPIO, CTOUT, R, LCD, R, TRACE, R, R, 0, ND); 325LPC_P(7,7, GPIO, CTOUT, R, LCD, R, TRACE, ENET, SGPIO, ADC1|6, ND); 326LPC_P(8,0, GPIO, USB0, R, MCTRL, SGPIO, R, R, TIMER0, 0, HD); 327LPC_P(8,1, GPIO, USB0, R, MCTRL, SGPIO, R, R, TIMER0, 0, HD); 328LPC_P(8,2, GPIO, USB0, R, MCTRL, SGPIO, R, R, TIMER0, 0, HD); 329LPC_P(8,3, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND); 330LPC_P(8,4, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND); 331LPC_P(8,5, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND); 332LPC_P(8,6, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND); 333LPC_P(8,7, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND); 334LPC_P(8,8, R, USB1, R, R, R, R,CGU_OUT, I2S1, 0, ND); 335LPC_P(9,0, GPIO, MCTRL, R, R, R, ENET, SGPIO, SSP0, 0, ND); 336LPC_P(9,1, GPIO, MCTRL, R, R, I2S0_TX_WS,ENET, SGPIO, SSP0, 0, ND); 337LPC_P(9,2, GPIO, MCTRL, R, R, I2S0_TX_SDA,ENET,SGPIO, SSP0, 0, ND); 338LPC_P(9,3, GPIO, MCTRL, USB1, R, R, ENET, SGPIO, UART3, 0, ND); 339LPC_P(9,4, R, MCTRL, USB1, R, GPIO, ENET, SGPIO, UART3, 0, ND); 340LPC_P(9,5, R, MCTRL, USB1, R, GPIO, ENET, SGPIO, UART0, 0, ND); 341LPC_P(9,6, GPIO, MCTRL, USB1, R, R, ENET, SGPIO, UART0, 0, ND); 342LPC_P(a,0, R, R, R, R, R, I2S1, CGU_OUT, R, 0, ND); 343LPC_P(a,1, GPIO, QEI, R, UART2, R, R, R, R, 0, HD); 344LPC_P(a,2, GPIO, QEI, R, UART2, R, R, R, R, 0, HD); 345LPC_P(a,3, GPIO, QEI, R, R, R, R, R, R, 0, HD); 346LPC_P(a,4, R, CTOUT, R, EMC, GPIO, R, R, R, 0, ND); 347LPC_P(b,0, R, CTOUT, LCD, R, GPIO, R, R, R, 0, ND); 348LPC_P(b,1, R, USB1, LCD, R, GPIO, CTOUT, R, R, 0, ND); 349LPC_P(b,2, R, USB1, LCD, R, GPIO, CTOUT, R, R, 0, ND); 350LPC_P(b,3, R, USB1, LCD, R, GPIO, CTOUT, R, R, 0, ND); 351LPC_P(b,4, R, USB1, LCD, R, GPIO, CTIN, R, R, 0, ND); 352LPC_P(b,5, R, USB1, LCD, R, GPIO, CTIN, LCD_ALT, R, 0, ND); 353LPC_P(b,6, R, USB1, LCD, R, GPIO, CTIN, LCD_ALT, R, ADC0|6, ND); 354LPC_P(c,0, R, USB1, R, ENET, LCD, R, R, SDMMC, ADC1|1, ND); 355LPC_P(c,1, USB1, R, UART1, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); 356LPC_P(c,2, USB1, R, UART1, ENET, GPIO, R, R, SDMMC, 0, ND); 357LPC_P(c,3, USB1, R, UART1, ENET, GPIO, R, R, SDMMC, ADC1|0, ND); 358LPC_P(c,4, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); 359LPC_P(c,5, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); 360LPC_P(c,6, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); 361LPC_P(c,7, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); 362LPC_P(c,8, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); 363LPC_P(c,9, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); 364LPC_P(c,10, R, USB1, UART1, R, GPIO, R, TIMER3, SDMMC, 0, ND); 365LPC_P(c,11, R, USB1, UART1, R, GPIO, R, R, SDMMC, 0, ND); 366LPC_P(c,12, R, R, UART1, R, GPIO, SGPIO, I2S0_TX_SDA,SDMMC, 0, ND); 367LPC_P(c,13, R, R, UART1, R, GPIO, SGPIO, I2S0_TX_WS, SDMMC, 0, ND); 368LPC_P(c,14, R, R, UART1, R, GPIO, SGPIO, ENET, SDMMC, 0, ND); 369LPC_P(d,0, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); 370LPC_P(d,1, R, R, EMC, R, GPIO, SDMMC, R, SGPIO, 0, ND); 371LPC_P(d,2, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); 372LPC_P(d,3, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); 373LPC_P(d,4, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); 374LPC_P(d,5, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); 375LPC_P(d,6, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); 376LPC_P(d,7, R, CTIN, EMC, R, GPIO, R, R, SGPIO, 0, ND); 377LPC_P(d,8, R, CTIN, EMC, R, GPIO, R, R, SGPIO, 0, ND); 378LPC_P(d,9, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); 379LPC_P(d,10, R, CTIN, EMC, R, GPIO, R, R, R, 0, ND); 380LPC_P(d,11, R, R, EMC, R, GPIO, USB1, CTOUT, R, 0, ND); 381LPC_P(d,12, R, R, EMC, R, GPIO, R, CTOUT, R, 0, ND); 382LPC_P(d,13, R, CTIN, EMC, R, GPIO, R, CTOUT, R, 0, ND); 383LPC_P(d,14, R, R, EMC, R, GPIO, R, CTOUT, R, 0, ND); 384LPC_P(d,15, R, R, EMC, R, GPIO, SDMMC, CTOUT, R, 0, ND); 385LPC_P(d,16, R, R, EMC, R, GPIO, SDMMC, CTOUT, R, 0, ND); 386LPC_P(e,0, R, R, R, EMC, GPIO, CAN1, R, R, 0, ND); 387LPC_P(e,1, R, R, R, EMC, GPIO, CAN1, R, R, 0, ND); 388LPC_P(e,2,ADCTRIG, CAN0, R, EMC, GPIO, R, R, R, 0, ND); 389LPC_P(e,3, R, CAN0,ADCTRIG, EMC, GPIO, R, R, R, 0, ND); 390LPC_P(e,4, R, NMI, R, EMC, GPIO, R, R, R, 0, ND); 391LPC_P(e,5, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND); 392LPC_P(e,6, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND); 393LPC_P(e,7, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND); 394LPC_P(e,8, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND); 395LPC_P(e,9, R, CTIN, UART1, EMC, GPIO, R, R, R, 0, ND); 396LPC_P(e,10, R, CTIN, UART1, EMC, GPIO, R, R, R, 0, ND); 397LPC_P(e,11, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND); 398LPC_P(e,12, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND); 399LPC_P(e,13, R, CTOUT, I2C1, EMC, GPIO, R, R, R, 0, ND); 400LPC_P(e,14, R, R, R, EMC, GPIO, R, R, R, 0, ND); 401LPC_P(e,15, R, CTOUT, I2C1, EMC, GPIO, R, R, R, 0, ND); 402LPC_P(f,0, SSP0, CLKIN, R, R, R, R, R, I2S1, 0, ND); 403LPC_P(f,1, R, R, SSP0, R, GPIO, R, SGPIO, R, 0, ND); 404LPC_P(f,2, R, UART3, SSP0, R, GPIO, R, SGPIO, R, 0, ND); 405LPC_P(f,3, R, UART3, SSP0, R, GPIO, R, SGPIO, R, 0, ND); 406LPC_P(f,4, SSP1, CLKIN, TRACE, R, R, R, I2S0_TX_MCLK,I2S0_RX_SCK, 0, ND); 407LPC_P(f,5, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, R, ADC1|4, ND); 408LPC_P(f,6, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, I2S1, ADC1|3, ND); 409LPC_P(f,7, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, I2S1, ADC1|7, ND); 410LPC_P(f,8, R, UART0, CTIN, TRACE, GPIO, R, SGPIO, R, ADC0|2, ND); 411LPC_P(f,9, R, UART0, CTOUT, R, GPIO, R, SGPIO, R, ADC1|2, ND); 412LPC_P(f,10, R, UART0, R, R, GPIO, R, SDMMC, R, ADC0|5, ND); 413LPC_P(f,11, R, UART0, R, R, GPIO, R, SDMMC, R, ADC1|5, ND); 414 415/* Pin Offset FUNC0 FUNC1 FUNC2 FUNC3 FUNC4 FUNC5 FUNC6 FUNC7 ANALOG TYPE */ 416LPC_N(clk0, 0xc00, EMC, CLKOUT, R, R, SDMMC, EMC_ALT, SSP1, ENET, 0, HS); 417LPC_N(clk1, 0xc04, EMC, CLKOUT, R, R, R, CGU_OUT, R, I2S1, 0, HS); 418LPC_N(clk2, 0xc08, EMC, CLKOUT, R, R, SDMMC, EMC_ALT,I2S0_TX_MCLK,I2S1, 0, HS); 419LPC_N(clk3, 0xc0c, EMC, CLKOUT, R, R, R, CGU_OUT, R, I2S1, 0, HS); 420LPC_N(usb1_dm, 0xc80, R, R, R, R, R, R, R, R, 0, USB1); 421LPC_N(usb1_dp, 0xc80, R, R, R, R, R, R, R, R, 0, USB1); 422LPC_N(i2c0_scl, 0xc84, R, R, R, R, R, R, R, R, 0, I2C0); 423LPC_N(i2c0_sda, 0xc84, R, R, R, R, R, R, R, R, 0, I2C0); 424 425#define LPC18XX_PIN_P(port, pin) { \ 426 .number = 0x##port * 32 + pin, \ 427 .name = "p"#port"_"#pin, \ 428 .drv_data = &lpc18xx_pin_p##port##_##pin \ 429} 430 431/* Pin numbers for special pins */ 432enum { 433 PIN_CLK0 = 600, 434 PIN_CLK1, 435 PIN_CLK2, 436 PIN_CLK3, 437 PIN_USB1_DM, 438 PIN_USB1_DP, 439 PIN_I2C0_SCL, 440 PIN_I2C0_SDA, 441}; 442 443#define LPC18XX_PIN(pname, n) { \ 444 .number = n, \ 445 .name = #pname, \ 446 .drv_data = &lpc18xx_pin_##pname \ 447} 448 449static const struct pinctrl_pin_desc lpc18xx_pins[] = { 450 LPC18XX_PIN_P(0,0), 451 LPC18XX_PIN_P(0,1), 452 LPC18XX_PIN_P(1,0), 453 LPC18XX_PIN_P(1,1), 454 LPC18XX_PIN_P(1,2), 455 LPC18XX_PIN_P(1,3), 456 LPC18XX_PIN_P(1,4), 457 LPC18XX_PIN_P(1,5), 458 LPC18XX_PIN_P(1,6), 459 LPC18XX_PIN_P(1,7), 460 LPC18XX_PIN_P(1,8), 461 LPC18XX_PIN_P(1,9), 462 LPC18XX_PIN_P(1,10), 463 LPC18XX_PIN_P(1,11), 464 LPC18XX_PIN_P(1,12), 465 LPC18XX_PIN_P(1,13), 466 LPC18XX_PIN_P(1,14), 467 LPC18XX_PIN_P(1,15), 468 LPC18XX_PIN_P(1,16), 469 LPC18XX_PIN_P(1,17), 470 LPC18XX_PIN_P(1,18), 471 LPC18XX_PIN_P(1,19), 472 LPC18XX_PIN_P(1,20), 473 LPC18XX_PIN_P(2,0), 474 LPC18XX_PIN_P(2,1), 475 LPC18XX_PIN_P(2,2), 476 LPC18XX_PIN_P(2,3), 477 LPC18XX_PIN_P(2,4), 478 LPC18XX_PIN_P(2,5), 479 LPC18XX_PIN_P(2,6), 480 LPC18XX_PIN_P(2,7), 481 LPC18XX_PIN_P(2,8), 482 LPC18XX_PIN_P(2,9), 483 LPC18XX_PIN_P(2,10), 484 LPC18XX_PIN_P(2,11), 485 LPC18XX_PIN_P(2,12), 486 LPC18XX_PIN_P(2,13), 487 LPC18XX_PIN_P(3,0), 488 LPC18XX_PIN_P(3,1), 489 LPC18XX_PIN_P(3,2), 490 LPC18XX_PIN_P(3,3), 491 LPC18XX_PIN_P(3,4), 492 LPC18XX_PIN_P(3,5), 493 LPC18XX_PIN_P(3,6), 494 LPC18XX_PIN_P(3,7), 495 LPC18XX_PIN_P(3,8), 496 LPC18XX_PIN_P(4,0), 497 LPC18XX_PIN_P(4,1), 498 LPC18XX_PIN_P(4,2), 499 LPC18XX_PIN_P(4,3), 500 LPC18XX_PIN_P(4,4), 501 LPC18XX_PIN_P(4,5), 502 LPC18XX_PIN_P(4,6), 503 LPC18XX_PIN_P(4,7), 504 LPC18XX_PIN_P(4,8), 505 LPC18XX_PIN_P(4,9), 506 LPC18XX_PIN_P(4,10), 507 LPC18XX_PIN_P(5,0), 508 LPC18XX_PIN_P(5,1), 509 LPC18XX_PIN_P(5,2), 510 LPC18XX_PIN_P(5,3), 511 LPC18XX_PIN_P(5,4), 512 LPC18XX_PIN_P(5,5), 513 LPC18XX_PIN_P(5,6), 514 LPC18XX_PIN_P(5,7), 515 LPC18XX_PIN_P(6,0), 516 LPC18XX_PIN_P(6,1), 517 LPC18XX_PIN_P(6,2), 518 LPC18XX_PIN_P(6,3), 519 LPC18XX_PIN_P(6,4), 520 LPC18XX_PIN_P(6,5), 521 LPC18XX_PIN_P(6,6), 522 LPC18XX_PIN_P(6,7), 523 LPC18XX_PIN_P(6,8), 524 LPC18XX_PIN_P(6,9), 525 LPC18XX_PIN_P(6,10), 526 LPC18XX_PIN_P(6,11), 527 LPC18XX_PIN_P(6,12), 528 LPC18XX_PIN_P(7,0), 529 LPC18XX_PIN_P(7,1), 530 LPC18XX_PIN_P(7,2), 531 LPC18XX_PIN_P(7,3), 532 LPC18XX_PIN_P(7,4), 533 LPC18XX_PIN_P(7,5), 534 LPC18XX_PIN_P(7,6), 535 LPC18XX_PIN_P(7,7), 536 LPC18XX_PIN_P(8,0), 537 LPC18XX_PIN_P(8,1), 538 LPC18XX_PIN_P(8,2), 539 LPC18XX_PIN_P(8,3), 540 LPC18XX_PIN_P(8,4), 541 LPC18XX_PIN_P(8,5), 542 LPC18XX_PIN_P(8,6), 543 LPC18XX_PIN_P(8,7), 544 LPC18XX_PIN_P(8,8), 545 LPC18XX_PIN_P(9,0), 546 LPC18XX_PIN_P(9,1), 547 LPC18XX_PIN_P(9,2), 548 LPC18XX_PIN_P(9,3), 549 LPC18XX_PIN_P(9,4), 550 LPC18XX_PIN_P(9,5), 551 LPC18XX_PIN_P(9,6), 552 LPC18XX_PIN_P(a,0), 553 LPC18XX_PIN_P(a,1), 554 LPC18XX_PIN_P(a,2), 555 LPC18XX_PIN_P(a,3), 556 LPC18XX_PIN_P(a,4), 557 LPC18XX_PIN_P(b,0), 558 LPC18XX_PIN_P(b,1), 559 LPC18XX_PIN_P(b,2), 560 LPC18XX_PIN_P(b,3), 561 LPC18XX_PIN_P(b,4), 562 LPC18XX_PIN_P(b,5), 563 LPC18XX_PIN_P(b,6), 564 LPC18XX_PIN_P(c,0), 565 LPC18XX_PIN_P(c,1), 566 LPC18XX_PIN_P(c,2), 567 LPC18XX_PIN_P(c,3), 568 LPC18XX_PIN_P(c,4), 569 LPC18XX_PIN_P(c,5), 570 LPC18XX_PIN_P(c,6), 571 LPC18XX_PIN_P(c,7), 572 LPC18XX_PIN_P(c,8), 573 LPC18XX_PIN_P(c,9), 574 LPC18XX_PIN_P(c,10), 575 LPC18XX_PIN_P(c,11), 576 LPC18XX_PIN_P(c,12), 577 LPC18XX_PIN_P(c,13), 578 LPC18XX_PIN_P(c,14), 579 LPC18XX_PIN_P(d,0), 580 LPC18XX_PIN_P(d,1), 581 LPC18XX_PIN_P(d,2), 582 LPC18XX_PIN_P(d,3), 583 LPC18XX_PIN_P(d,4), 584 LPC18XX_PIN_P(d,5), 585 LPC18XX_PIN_P(d,6), 586 LPC18XX_PIN_P(d,7), 587 LPC18XX_PIN_P(d,8), 588 LPC18XX_PIN_P(d,9), 589 LPC18XX_PIN_P(d,10), 590 LPC18XX_PIN_P(d,11), 591 LPC18XX_PIN_P(d,12), 592 LPC18XX_PIN_P(d,13), 593 LPC18XX_PIN_P(d,14), 594 LPC18XX_PIN_P(d,15), 595 LPC18XX_PIN_P(d,16), 596 LPC18XX_PIN_P(e,0), 597 LPC18XX_PIN_P(e,1), 598 LPC18XX_PIN_P(e,2), 599 LPC18XX_PIN_P(e,3), 600 LPC18XX_PIN_P(e,4), 601 LPC18XX_PIN_P(e,5), 602 LPC18XX_PIN_P(e,6), 603 LPC18XX_PIN_P(e,7), 604 LPC18XX_PIN_P(e,8), 605 LPC18XX_PIN_P(e,9), 606 LPC18XX_PIN_P(e,10), 607 LPC18XX_PIN_P(e,11), 608 LPC18XX_PIN_P(e,12), 609 LPC18XX_PIN_P(e,13), 610 LPC18XX_PIN_P(e,14), 611 LPC18XX_PIN_P(e,15), 612 LPC18XX_PIN_P(f,0), 613 LPC18XX_PIN_P(f,1), 614 LPC18XX_PIN_P(f,2), 615 LPC18XX_PIN_P(f,3), 616 LPC18XX_PIN_P(f,4), 617 LPC18XX_PIN_P(f,5), 618 LPC18XX_PIN_P(f,6), 619 LPC18XX_PIN_P(f,7), 620 LPC18XX_PIN_P(f,8), 621 LPC18XX_PIN_P(f,9), 622 LPC18XX_PIN_P(f,10), 623 LPC18XX_PIN_P(f,11), 624 625 LPC18XX_PIN(clk0, PIN_CLK0), 626 LPC18XX_PIN(clk1, PIN_CLK1), 627 LPC18XX_PIN(clk2, PIN_CLK2), 628 LPC18XX_PIN(clk3, PIN_CLK3), 629 LPC18XX_PIN(usb1_dm, PIN_USB1_DM), 630 LPC18XX_PIN(usb1_dp, PIN_USB1_DP), 631 LPC18XX_PIN(i2c0_scl, PIN_I2C0_SCL), 632 LPC18XX_PIN(i2c0_sda, PIN_I2C0_SDA), 633}; 634 635/* PIN_CONFIG_GPIO_PIN_INT: route gpio to the gpio pin interrupt controller */ 636#define PIN_CONFIG_GPIO_PIN_INT (PIN_CONFIG_END + 1) 637 638static const struct pinconf_generic_params lpc18xx_params[] = { 639 {"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0}, 640}; 641 642#ifdef CONFIG_DEBUG_FS 643static const struct pin_config_item lpc18xx_conf_items[ARRAY_SIZE(lpc18xx_params)] = { 644 PCONFDUMP(PIN_CONFIG_GPIO_PIN_INT, "gpio pin int", NULL, true), 645}; 646#endif 647 648static int lpc18xx_pconf_get_usb1(enum pin_config_param param, int *arg, u32 reg) 649{ 650 switch (param) { 651 case PIN_CONFIG_MODE_LOW_POWER: 652 if (reg & LPC18XX_SCU_USB1_EPWR) 653 *arg = 0; 654 else 655 *arg = 1; 656 break; 657 658 case PIN_CONFIG_BIAS_DISABLE: 659 if (reg & LPC18XX_SCU_USB1_EPD) 660 return -EINVAL; 661 break; 662 663 case PIN_CONFIG_BIAS_PULL_DOWN: 664 if (reg & LPC18XX_SCU_USB1_EPD) 665 *arg = 1; 666 else 667 return -EINVAL; 668 break; 669 670 default: 671 return -ENOTSUPP; 672 } 673 674 return 0; 675} 676 677static int lpc18xx_pconf_get_i2c0(enum pin_config_param param, int *arg, u32 reg, 678 unsigned pin) 679{ 680 u8 shift; 681 682 if (pin == PIN_I2C0_SCL) 683 shift = LPC18XX_SCU_I2C0_SCL_SHIFT; 684 else 685 shift = LPC18XX_SCU_I2C0_SDA_SHIFT; 686 687 switch (param) { 688 case PIN_CONFIG_INPUT_ENABLE: 689 if (reg & (LPC18XX_SCU_I2C0_EZI << shift)) 690 *arg = 1; 691 else 692 return -EINVAL; 693 break; 694 695 case PIN_CONFIG_SLEW_RATE: 696 if (reg & (LPC18XX_SCU_I2C0_EHD << shift)) 697 *arg = 1; 698 else 699 *arg = 0; 700 break; 701 702 case PIN_CONFIG_INPUT_SCHMITT: 703 if (reg & (LPC18XX_SCU_I2C0_EFP << shift)) 704 *arg = 3; 705 else 706 *arg = 50; 707 break; 708 709 case PIN_CONFIG_INPUT_SCHMITT_ENABLE: 710 if (reg & (LPC18XX_SCU_I2C0_ZIF << shift)) 711 return -EINVAL; 712 else 713 *arg = 1; 714 break; 715 716 default: 717 return -ENOTSUPP; 718 } 719 720 return 0; 721} 722 723static int lpc18xx_pin_to_gpio(struct pinctrl_dev *pctldev, unsigned pin) 724{ 725 struct pinctrl_gpio_range *range; 726 727 range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin); 728 if (!range) 729 return -EINVAL; 730 731 return pin - range->pin_base + range->base; 732} 733 734static int lpc18xx_get_pintsel(void __iomem *addr, u32 val, int *arg) 735{ 736 u32 reg_val; 737 int i; 738 739 reg_val = readl(addr); 740 for (i = 0; i < LPC18XX_SCU_IRQ_PER_PINTSEL; i++) { 741 if ((reg_val & LPC18XX_SCU_PINTSEL_VAL_MASK) == val) 742 return 0; 743 744 reg_val >>= BITS_PER_BYTE; 745 *arg += 1; 746 } 747 748 return -EINVAL; 749} 750 751static u32 lpc18xx_gpio_to_pintsel_val(int gpio) 752{ 753 unsigned int gpio_port, gpio_pin; 754 755 gpio_port = gpio / LPC18XX_GPIO_PINS_PER_PORT; 756 gpio_pin = gpio % LPC18XX_GPIO_PINS_PER_PORT; 757 758 return gpio_pin | (gpio_port << LPC18XX_SCU_PINTSEL_PORT_SHIFT); 759} 760 761static int lpc18xx_pconf_get_gpio_pin_int(struct pinctrl_dev *pctldev, 762 int *arg, unsigned pin) 763{ 764 struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev); 765 int gpio, ret; 766 u32 val; 767 768 gpio = lpc18xx_pin_to_gpio(pctldev, pin); 769 if (gpio < 0) 770 return -ENOTSUPP; 771 772 val = lpc18xx_gpio_to_pintsel_val(gpio); 773 774 /* 775 * Check if this pin has been enabled as a interrupt in any of the two 776 * PINTSEL registers. *arg indicates which interrupt number (0-7). 777 */ 778 *arg = 0; 779 ret = lpc18xx_get_pintsel(scu->base + LPC18XX_SCU_PINTSEL0, val, arg); 780 if (ret == 0) 781 return ret; 782 783 return lpc18xx_get_pintsel(scu->base + LPC18XX_SCU_PINTSEL1, val, arg); 784} 785 786static int lpc18xx_pconf_get_pin(struct pinctrl_dev *pctldev, unsigned param, 787 int *arg, u32 reg, unsigned pin, 788 struct lpc18xx_pin_caps *pin_cap) 789{ 790 switch (param) { 791 case PIN_CONFIG_BIAS_DISABLE: 792 if ((!(reg & LPC18XX_SCU_PIN_EPD)) && (reg & LPC18XX_SCU_PIN_EPUN)) 793 ; 794 else 795 return -EINVAL; 796 break; 797 798 case PIN_CONFIG_BIAS_PULL_UP: 799 if (reg & LPC18XX_SCU_PIN_EPUN) 800 return -EINVAL; 801 else 802 *arg = 1; 803 break; 804 805 case PIN_CONFIG_BIAS_PULL_DOWN: 806 if (reg & LPC18XX_SCU_PIN_EPD) 807 *arg = 1; 808 else 809 return -EINVAL; 810 break; 811 812 case PIN_CONFIG_INPUT_ENABLE: 813 if (reg & LPC18XX_SCU_PIN_EZI) 814 *arg = 1; 815 else 816 return -EINVAL; 817 break; 818 819 case PIN_CONFIG_SLEW_RATE: 820 if (pin_cap->type == TYPE_HD) 821 return -ENOTSUPP; 822 823 if (reg & LPC18XX_SCU_PIN_EHS) 824 *arg = 1; 825 else 826 *arg = 0; 827 break; 828 829 case PIN_CONFIG_INPUT_SCHMITT_ENABLE: 830 if (reg & LPC18XX_SCU_PIN_ZIF) 831 return -EINVAL; 832 else 833 *arg = 1; 834 break; 835 836 case PIN_CONFIG_DRIVE_STRENGTH: 837 if (pin_cap->type != TYPE_HD) 838 return -ENOTSUPP; 839 840 *arg = (reg & LPC18XX_SCU_PIN_EHD_MASK) >> LPC18XX_SCU_PIN_EHD_POS; 841 switch (*arg) { 842 case 3: *arg += 5; 843 fallthrough; 844 case 2: *arg += 5; 845 fallthrough; 846 case 1: *arg += 3; 847 fallthrough; 848 case 0: *arg += 4; 849 } 850 break; 851 852 case PIN_CONFIG_GPIO_PIN_INT: 853 return lpc18xx_pconf_get_gpio_pin_int(pctldev, arg, pin); 854 855 default: 856 return -ENOTSUPP; 857 } 858 859 return 0; 860} 861 862static struct lpc18xx_pin_caps *lpc18xx_get_pin_caps(unsigned pin) 863{ 864 int i; 865 866 for (i = 0; i < ARRAY_SIZE(lpc18xx_pins); i++) { 867 if (lpc18xx_pins[i].number == pin) 868 return lpc18xx_pins[i].drv_data; 869 } 870 871 return NULL; 872} 873 874static int lpc18xx_pconf_get(struct pinctrl_dev *pctldev, unsigned pin, 875 unsigned long *config) 876{ 877 struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev); 878 enum pin_config_param param = pinconf_to_config_param(*config); 879 struct lpc18xx_pin_caps *pin_cap; 880 int ret, arg = 0; 881 u32 reg; 882 883 pin_cap = lpc18xx_get_pin_caps(pin); 884 if (!pin_cap) 885 return -EINVAL; 886 887 reg = readl(scu->base + pin_cap->offset); 888 889 if (pin_cap->type == TYPE_I2C0) 890 ret = lpc18xx_pconf_get_i2c0(param, &arg, reg, pin); 891 else if (pin_cap->type == TYPE_USB1) 892 ret = lpc18xx_pconf_get_usb1(param, &arg, reg); 893 else 894 ret = lpc18xx_pconf_get_pin(pctldev, param, &arg, reg, pin, pin_cap); 895 896 if (ret < 0) 897 return ret; 898 899 *config = pinconf_to_config_packed(param, (u16)arg); 900 901 return 0; 902} 903 904static int lpc18xx_pconf_set_usb1(struct pinctrl_dev *pctldev, 905 enum pin_config_param param, 906 u32 param_val, u32 *reg) 907{ 908 switch (param) { 909 case PIN_CONFIG_MODE_LOW_POWER: 910 if (param_val) 911 *reg &= ~LPC18XX_SCU_USB1_EPWR; 912 else 913 *reg |= LPC18XX_SCU_USB1_EPWR; 914 break; 915 916 case PIN_CONFIG_BIAS_DISABLE: 917 *reg &= ~LPC18XX_SCU_USB1_EPD; 918 break; 919 920 case PIN_CONFIG_BIAS_PULL_DOWN: 921 *reg |= LPC18XX_SCU_USB1_EPD; 922 break; 923 924 default: 925 dev_err(pctldev->dev, "Property not supported\n"); 926 return -ENOTSUPP; 927 } 928 929 return 0; 930} 931 932static int lpc18xx_pconf_set_i2c0(struct pinctrl_dev *pctldev, 933 enum pin_config_param param, 934 u32 param_val, u32 *reg, 935 unsigned pin) 936{ 937 u8 shift; 938 939 if (pin == PIN_I2C0_SCL) 940 shift = LPC18XX_SCU_I2C0_SCL_SHIFT; 941 else 942 shift = LPC18XX_SCU_I2C0_SDA_SHIFT; 943 944 switch (param) { 945 case PIN_CONFIG_INPUT_ENABLE: 946 if (param_val) 947 *reg |= (LPC18XX_SCU_I2C0_EZI << shift); 948 else 949 *reg &= ~(LPC18XX_SCU_I2C0_EZI << shift); 950 break; 951 952 case PIN_CONFIG_SLEW_RATE: 953 if (param_val) 954 *reg |= (LPC18XX_SCU_I2C0_EHD << shift); 955 else 956 *reg &= ~(LPC18XX_SCU_I2C0_EHD << shift); 957 break; 958 959 case PIN_CONFIG_INPUT_SCHMITT: 960 if (param_val == 3) 961 *reg |= (LPC18XX_SCU_I2C0_EFP << shift); 962 else if (param_val == 50) 963 *reg &= ~(LPC18XX_SCU_I2C0_EFP << shift); 964 else 965 return -ENOTSUPP; 966 break; 967 968 case PIN_CONFIG_INPUT_SCHMITT_ENABLE: 969 if (param_val) 970 *reg &= ~(LPC18XX_SCU_I2C0_ZIF << shift); 971 else 972 *reg |= (LPC18XX_SCU_I2C0_ZIF << shift); 973 break; 974 975 default: 976 dev_err(pctldev->dev, "Property not supported\n"); 977 return -ENOTSUPP; 978 } 979 980 return 0; 981} 982 983static int lpc18xx_pconf_set_gpio_pin_int(struct pinctrl_dev *pctldev, 984 u32 param_val, unsigned pin) 985{ 986 struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev); 987 u32 val, reg_val, reg_offset = LPC18XX_SCU_PINTSEL0; 988 int gpio; 989 990 if (param_val >= LPC18XX_GPIO_PIN_INT_MAX) 991 return -EINVAL; 992 993 gpio = lpc18xx_pin_to_gpio(pctldev, pin); 994 if (gpio < 0) 995 return -ENOTSUPP; 996 997 val = lpc18xx_gpio_to_pintsel_val(gpio); 998 999 reg_offset += (param_val / LPC18XX_SCU_IRQ_PER_PINTSEL) * sizeof(u32); 1000 1001 reg_val = readl(scu->base + reg_offset); 1002 reg_val &= ~LPC18XX_SCU_PINTSEL_VAL(LPC18XX_SCU_PINTSEL_VAL_MASK, param_val); 1003 reg_val |= LPC18XX_SCU_PINTSEL_VAL(val, param_val); 1004 writel(reg_val, scu->base + reg_offset); 1005 1006 return 0; 1007} 1008 1009static int lpc18xx_pconf_set_pin(struct pinctrl_dev *pctldev, unsigned param, 1010 u32 param_val, u32 *reg, unsigned pin, 1011 struct lpc18xx_pin_caps *pin_cap) 1012{ 1013 switch (param) { 1014 case PIN_CONFIG_BIAS_DISABLE: 1015 *reg &= ~LPC18XX_SCU_PIN_EPD; 1016 *reg |= LPC18XX_SCU_PIN_EPUN; 1017 break; 1018 1019 case PIN_CONFIG_BIAS_PULL_UP: 1020 *reg &= ~LPC18XX_SCU_PIN_EPUN; 1021 break; 1022 1023 case PIN_CONFIG_BIAS_PULL_DOWN: 1024 *reg |= LPC18XX_SCU_PIN_EPD; 1025 break; 1026 1027 case PIN_CONFIG_INPUT_ENABLE: 1028 if (param_val) 1029 *reg |= LPC18XX_SCU_PIN_EZI; 1030 else 1031 *reg &= ~LPC18XX_SCU_PIN_EZI; 1032 break; 1033 1034 case PIN_CONFIG_SLEW_RATE: 1035 if (pin_cap->type == TYPE_HD) { 1036 dev_err(pctldev->dev, "Slew rate unsupported on high-drive pins\n"); 1037 return -ENOTSUPP; 1038 } 1039 1040 if (param_val == 0) 1041 *reg &= ~LPC18XX_SCU_PIN_EHS; 1042 else 1043 *reg |= LPC18XX_SCU_PIN_EHS; 1044 break; 1045 1046 case PIN_CONFIG_INPUT_SCHMITT_ENABLE: 1047 if (param_val) 1048 *reg &= ~LPC18XX_SCU_PIN_ZIF; 1049 else 1050 *reg |= LPC18XX_SCU_PIN_ZIF; 1051 break; 1052 1053 case PIN_CONFIG_DRIVE_STRENGTH: 1054 if (pin_cap->type != TYPE_HD) { 1055 dev_err(pctldev->dev, "Drive strength available only on high-drive pins\n"); 1056 return -ENOTSUPP; 1057 } 1058 *reg &= ~LPC18XX_SCU_PIN_EHD_MASK; 1059 1060 switch (param_val) { 1061 case 20: param_val -= 5; 1062 fallthrough; 1063 case 14: param_val -= 5; 1064 fallthrough; 1065 case 8: param_val -= 3; 1066 fallthrough; 1067 case 4: param_val -= 4; 1068 break; 1069 default: 1070 dev_err(pctldev->dev, "Drive strength %u unsupported\n", param_val); 1071 return -ENOTSUPP; 1072 } 1073 *reg |= param_val << LPC18XX_SCU_PIN_EHD_POS; 1074 break; 1075 1076 case PIN_CONFIG_GPIO_PIN_INT: 1077 return lpc18xx_pconf_set_gpio_pin_int(pctldev, param_val, pin); 1078 1079 default: 1080 dev_err(pctldev->dev, "Property not supported\n"); 1081 return -ENOTSUPP; 1082 } 1083 1084 return 0; 1085} 1086 1087static int lpc18xx_pconf_set(struct pinctrl_dev *pctldev, unsigned pin, 1088 unsigned long *configs, unsigned num_configs) 1089{ 1090 struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev); 1091 struct lpc18xx_pin_caps *pin_cap; 1092 enum pin_config_param param; 1093 u32 param_val; 1094 u32 reg; 1095 int ret; 1096 int i; 1097 1098 pin_cap = lpc18xx_get_pin_caps(pin); 1099 if (!pin_cap) 1100 return -EINVAL; 1101 1102 reg = readl(scu->base + pin_cap->offset); 1103 1104 for (i = 0; i < num_configs; i++) { 1105 param = pinconf_to_config_param(configs[i]); 1106 param_val = pinconf_to_config_argument(configs[i]); 1107 1108 if (pin_cap->type == TYPE_I2C0) 1109 ret = lpc18xx_pconf_set_i2c0(pctldev, param, param_val, ®, pin); 1110 else if (pin_cap->type == TYPE_USB1) 1111 ret = lpc18xx_pconf_set_usb1(pctldev, param, param_val, ®); 1112 else 1113 ret = lpc18xx_pconf_set_pin(pctldev, param, param_val, ®, pin, pin_cap); 1114 1115 if (ret) 1116 return ret; 1117 } 1118 1119 writel(reg, scu->base + pin_cap->offset); 1120 1121 return 0; 1122} 1123 1124static const struct pinconf_ops lpc18xx_pconf_ops = { 1125 .is_generic = true, 1126 .pin_config_get = lpc18xx_pconf_get, 1127 .pin_config_set = lpc18xx_pconf_set, 1128}; 1129 1130static int lpc18xx_pmx_get_funcs_count(struct pinctrl_dev *pctldev) 1131{ 1132 return ARRAY_SIZE(lpc18xx_function_names); 1133} 1134 1135static const char *lpc18xx_pmx_get_func_name(struct pinctrl_dev *pctldev, 1136 unsigned function) 1137{ 1138 return lpc18xx_function_names[function]; 1139} 1140 1141static int lpc18xx_pmx_get_func_groups(struct pinctrl_dev *pctldev, 1142 unsigned function, 1143 const char *const **groups, 1144 unsigned *const num_groups) 1145{ 1146 struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev); 1147 1148 *groups = scu->func[function].groups; 1149 *num_groups = scu->func[function].ngroups; 1150 1151 return 0; 1152} 1153 1154static int lpc18xx_pmx_set(struct pinctrl_dev *pctldev, unsigned function, 1155 unsigned group) 1156{ 1157 struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev); 1158 struct lpc18xx_pin_caps *pin = lpc18xx_pins[group].drv_data; 1159 int func; 1160 u32 reg; 1161 1162 /* Dedicated USB1 and I2C0 pins doesn't support muxing */ 1163 if (pin->type == TYPE_USB1) { 1164 if (function == FUNC_USB1) 1165 return 0; 1166 1167 goto fail; 1168 } 1169 1170 if (pin->type == TYPE_I2C0) { 1171 if (function == FUNC_I2C0) 1172 return 0; 1173 1174 goto fail; 1175 } 1176 1177 if (function == FUNC_ADC && (pin->analog & LPC18XX_ANALOG_PIN)) { 1178 u32 offset; 1179 1180 writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset); 1181 1182 if (LPC18XX_ANALOG_ADC(pin->analog) == 0) 1183 offset = LPC18XX_SCU_REG_ENAIO0; 1184 else 1185 offset = LPC18XX_SCU_REG_ENAIO1; 1186 1187 reg = readl(scu->base + offset); 1188 reg |= pin->analog & LPC18XX_ANALOG_BIT_MASK; 1189 writel(reg, scu->base + offset); 1190 1191 return 0; 1192 } 1193 1194 if (function == FUNC_DAC && (pin->analog & LPC18XX_ANALOG_PIN)) { 1195 writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset); 1196 1197 reg = readl(scu->base + LPC18XX_SCU_REG_ENAIO2); 1198 reg |= LPC18XX_SCU_REG_ENAIO2_DAC; 1199 writel(reg, scu->base + LPC18XX_SCU_REG_ENAIO2); 1200 1201 return 0; 1202 } 1203 1204 for (func = 0; func < LPC18XX_SCU_FUNC_PER_PIN; func++) { 1205 if (function == pin->functions[func]) 1206 break; 1207 } 1208 1209 if (func >= LPC18XX_SCU_FUNC_PER_PIN) 1210 goto fail; 1211 1212 reg = readl(scu->base + pin->offset); 1213 reg &= ~LPC18XX_SCU_PIN_MODE_MASK; 1214 writel(reg | func, scu->base + pin->offset); 1215 1216 return 0; 1217fail: 1218 dev_err(pctldev->dev, "Pin %s can't be %s\n", lpc18xx_pins[group].name, 1219 lpc18xx_function_names[function]); 1220 return -EINVAL; 1221} 1222 1223static const struct pinmux_ops lpc18xx_pmx_ops = { 1224 .get_functions_count = lpc18xx_pmx_get_funcs_count, 1225 .get_function_name = lpc18xx_pmx_get_func_name, 1226 .get_function_groups = lpc18xx_pmx_get_func_groups, 1227 .set_mux = lpc18xx_pmx_set, 1228}; 1229 1230static int lpc18xx_pctl_get_groups_count(struct pinctrl_dev *pctldev) 1231{ 1232 return ARRAY_SIZE(lpc18xx_pins); 1233} 1234 1235static const char *lpc18xx_pctl_get_group_name(struct pinctrl_dev *pctldev, 1236 unsigned group) 1237{ 1238 return lpc18xx_pins[group].name; 1239} 1240 1241static int lpc18xx_pctl_get_group_pins(struct pinctrl_dev *pctldev, 1242 unsigned group, 1243 const unsigned **pins, 1244 unsigned *num_pins) 1245{ 1246 *pins = &lpc18xx_pins[group].number; 1247 *num_pins = 1; 1248 1249 return 0; 1250} 1251 1252static const struct pinctrl_ops lpc18xx_pctl_ops = { 1253 .get_groups_count = lpc18xx_pctl_get_groups_count, 1254 .get_group_name = lpc18xx_pctl_get_group_name, 1255 .get_group_pins = lpc18xx_pctl_get_group_pins, 1256 .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, 1257 .dt_free_map = pinctrl_utils_free_map, 1258}; 1259 1260static struct pinctrl_desc lpc18xx_scu_desc = { 1261 .name = "lpc18xx/43xx-scu", 1262 .pins = lpc18xx_pins, 1263 .npins = ARRAY_SIZE(lpc18xx_pins), 1264 .pctlops = &lpc18xx_pctl_ops, 1265 .pmxops = &lpc18xx_pmx_ops, 1266 .confops = &lpc18xx_pconf_ops, 1267 .num_custom_params = ARRAY_SIZE(lpc18xx_params), 1268 .custom_params = lpc18xx_params, 1269#ifdef CONFIG_DEBUG_FS 1270 .custom_conf_items = lpc18xx_conf_items, 1271#endif 1272 .owner = THIS_MODULE, 1273}; 1274 1275static bool lpc18xx_valid_pin_function(unsigned pin, unsigned function) 1276{ 1277 struct lpc18xx_pin_caps *p = lpc18xx_pins[pin].drv_data; 1278 int i; 1279 1280 if (function == FUNC_DAC && p->analog == DAC) 1281 return true; 1282 1283 if (function == FUNC_ADC && p->analog) 1284 return true; 1285 1286 if (function == FUNC_I2C0 && p->type == TYPE_I2C0) 1287 return true; 1288 1289 if (function == FUNC_USB1 && p->type == TYPE_USB1) 1290 return true; 1291 1292 for (i = 0; i < LPC18XX_SCU_FUNC_PER_PIN; i++) { 1293 if (function == p->functions[i]) 1294 return true; 1295 } 1296 1297 return false; 1298} 1299 1300static int lpc18xx_create_group_func_map(struct device *dev, 1301 struct lpc18xx_scu_data *scu) 1302{ 1303 u16 pins[ARRAY_SIZE(lpc18xx_pins)]; 1304 int func, ngroups, i; 1305 1306 for (func = 0; func < FUNC_MAX; func++) { 1307 for (ngroups = 0, i = 0; i < ARRAY_SIZE(lpc18xx_pins); i++) { 1308 if (lpc18xx_valid_pin_function(i, func)) 1309 pins[ngroups++] = i; 1310 } 1311 1312 scu->func[func].ngroups = ngroups; 1313 scu->func[func].groups = devm_kcalloc(dev, 1314 ngroups, sizeof(char *), 1315 GFP_KERNEL); 1316 if (!scu->func[func].groups) 1317 return -ENOMEM; 1318 1319 for (i = 0; i < ngroups; i++) 1320 scu->func[func].groups[i] = lpc18xx_pins[pins[i]].name; 1321 } 1322 1323 return 0; 1324} 1325 1326static int lpc18xx_scu_probe(struct platform_device *pdev) 1327{ 1328 struct lpc18xx_scu_data *scu; 1329 int ret; 1330 1331 scu = devm_kzalloc(&pdev->dev, sizeof(*scu), GFP_KERNEL); 1332 if (!scu) 1333 return -ENOMEM; 1334 1335 scu->base = devm_platform_ioremap_resource(pdev, 0); 1336 if (IS_ERR(scu->base)) 1337 return PTR_ERR(scu->base); 1338 1339 scu->clk = devm_clk_get(&pdev->dev, NULL); 1340 if (IS_ERR(scu->clk)) { 1341 dev_err(&pdev->dev, "Input clock not found.\n"); 1342 return PTR_ERR(scu->clk); 1343 } 1344 1345 ret = lpc18xx_create_group_func_map(&pdev->dev, scu); 1346 if (ret) { 1347 dev_err(&pdev->dev, "Unable to create group func map.\n"); 1348 return ret; 1349 } 1350 1351 ret = clk_prepare_enable(scu->clk); 1352 if (ret) { 1353 dev_err(&pdev->dev, "Unable to enable clock.\n"); 1354 return ret; 1355 } 1356 1357 platform_set_drvdata(pdev, scu); 1358 1359 scu->pctl = devm_pinctrl_register(&pdev->dev, &lpc18xx_scu_desc, scu); 1360 if (IS_ERR(scu->pctl)) { 1361 dev_err(&pdev->dev, "Could not register pinctrl driver\n"); 1362 clk_disable_unprepare(scu->clk); 1363 return PTR_ERR(scu->pctl); 1364 } 1365 1366 return 0; 1367} 1368 1369static const struct of_device_id lpc18xx_scu_match[] = { 1370 { .compatible = "nxp,lpc1850-scu" }, 1371 {}, 1372}; 1373 1374static struct platform_driver lpc18xx_scu_driver = { 1375 .probe = lpc18xx_scu_probe, 1376 .driver = { 1377 .name = "lpc18xx-scu", 1378 .of_match_table = lpc18xx_scu_match, 1379 .suppress_bind_attrs = true, 1380 }, 1381}; 1382builtin_platform_driver(lpc18xx_scu_driver); 1383