1// SPDX-License-Identifier: GPL-2.0 2/* 3 * phy-rtk-usb2.c RTK usb2.0 PHY driver 4 * 5 * Copyright (C) 2023 Realtek Semiconductor Corporation 6 * 7 */ 8 9#include <linux/module.h> 10#include <linux/of.h> 11#include <linux/of_address.h> 12#include <linux/platform_device.h> 13#include <linux/uaccess.h> 14#include <linux/debugfs.h> 15#include <linux/nvmem-consumer.h> 16#include <linux/regmap.h> 17#include <linux/sys_soc.h> 18#include <linux/mfd/syscon.h> 19#include <linux/phy/phy.h> 20#include <linux/usb.h> 21 22/* GUSB2PHYACCn register */ 23#define PHY_NEW_REG_REQ BIT(25) 24#define PHY_VSTS_BUSY BIT(23) 25#define PHY_VCTRL_SHIFT 8 26#define PHY_REG_DATA_MASK 0xff 27 28#define GET_LOW_NIBBLE(addr) ((addr) & 0x0f) 29#define GET_HIGH_NIBBLE(addr) (((addr) & 0xf0) >> 4) 30 31#define EFUS_USB_DC_CAL_RATE 2 32#define EFUS_USB_DC_CAL_MAX 7 33 34#define EFUS_USB_DC_DIS_RATE 1 35#define EFUS_USB_DC_DIS_MAX 7 36 37#define MAX_PHY_DATA_SIZE 20 38#define OFFEST_PHY_READ 0x20 39 40#define MAX_USB_PHY_NUM 4 41#define MAX_USB_PHY_PAGE0_DATA_SIZE 16 42#define MAX_USB_PHY_PAGE1_DATA_SIZE 16 43#define MAX_USB_PHY_PAGE2_DATA_SIZE 8 44 45#define SET_PAGE_OFFSET 0xf4 46#define SET_PAGE_0 0x9b 47#define SET_PAGE_1 0xbb 48#define SET_PAGE_2 0xdb 49 50#define PAGE_START 0xe0 51#define PAGE0_0XE4 0xe4 52#define PAGE0_0XE6 0xe6 53#define PAGE0_0XE7 0xe7 54#define PAGE1_0XE0 0xe0 55#define PAGE1_0XE2 0xe2 56 57#define SENSITIVITY_CTRL (BIT(4) | BIT(5) | BIT(6)) 58#define ENABLE_AUTO_SENSITIVITY_CALIBRATION BIT(2) 59#define DEFAULT_DC_DRIVING_VALUE (0x8) 60#define DEFAULT_DC_DISCONNECTION_VALUE (0x6) 61#define HS_CLK_SELECT BIT(6) 62 63struct phy_reg { 64 void __iomem *reg_wrap_vstatus; 65 void __iomem *reg_gusb2phyacc0; 66 int vstatus_index; 67}; 68 69struct phy_data { 70 u8 addr; 71 u8 data; 72}; 73 74struct phy_cfg { 75 int page0_size; 76 struct phy_data page0[MAX_USB_PHY_PAGE0_DATA_SIZE]; 77 int page1_size; 78 struct phy_data page1[MAX_USB_PHY_PAGE1_DATA_SIZE]; 79 int page2_size; 80 struct phy_data page2[MAX_USB_PHY_PAGE2_DATA_SIZE]; 81 82 int num_phy; 83 84 bool check_efuse; 85 int check_efuse_version; 86#define CHECK_EFUSE_V1 1 87#define CHECK_EFUSE_V2 2 88 int efuse_dc_driving_rate; 89 int efuse_dc_disconnect_rate; 90 int dc_driving_mask; 91 int dc_disconnect_mask; 92 bool usb_dc_disconnect_at_page0; 93 int driving_updated_for_dev_dis; 94 95 bool do_toggle; 96 bool do_toggle_driving; 97 bool use_default_parameter; 98 bool is_double_sensitivity_mode; 99}; 100 101struct phy_parameter { 102 struct phy_reg phy_reg; 103 104 /* Get from efuse */ 105 s8 efuse_usb_dc_cal; 106 s8 efuse_usb_dc_dis; 107 108 /* Get from dts */ 109 bool inverse_hstx_sync_clock; 110 u32 driving_level; 111 s32 driving_level_compensate; 112 s32 disconnection_compensate; 113}; 114 115struct rtk_phy { 116 struct device *dev; 117 118 struct phy_cfg *phy_cfg; 119 int num_phy; 120 struct phy_parameter *phy_parameter; 121 122 struct dentry *debug_dir; 123}; 124 125/* mapping 0xE0 to 0 ... 0xE7 to 7, 0xF0 to 8 ,,, 0xF7 to 15 */ 126static inline int page_addr_to_array_index(u8 addr) 127{ 128 return (int)((((addr) - PAGE_START) & 0x7) + 129 ((((addr) - PAGE_START) & 0x10) >> 1)); 130} 131 132static inline u8 array_index_to_page_addr(int index) 133{ 134 return ((((index) + PAGE_START) & 0x7) + 135 ((((index) & 0x8) << 1) + PAGE_START)); 136} 137 138#define PHY_IO_TIMEOUT_USEC (50000) 139#define PHY_IO_DELAY_US (100) 140 141static inline int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) 142{ 143 int ret; 144 unsigned int val; 145 146 ret = read_poll_timeout(readl, val, ((val & mask) == result), 147 PHY_IO_DELAY_US, PHY_IO_TIMEOUT_USEC, false, reg); 148 if (ret) { 149 pr_err("%s can't program USB phy\n", __func__); 150 return -ETIMEDOUT; 151 } 152 153 return 0; 154} 155 156static char rtk_phy_read(struct phy_reg *phy_reg, char addr) 157{ 158 void __iomem *reg_gusb2phyacc0 = phy_reg->reg_gusb2phyacc0; 159 unsigned int val; 160 int ret = 0; 161 162 addr -= OFFEST_PHY_READ; 163 164 /* polling until VBusy == 0 */ 165 ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); 166 if (ret) 167 return (char)ret; 168 169 /* VCtrl = low nibble of addr, and set PHY_NEW_REG_REQ */ 170 val = PHY_NEW_REG_REQ | (GET_LOW_NIBBLE(addr) << PHY_VCTRL_SHIFT); 171 writel(val, reg_gusb2phyacc0); 172 ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); 173 if (ret) 174 return (char)ret; 175 176 /* VCtrl = high nibble of addr, and set PHY_NEW_REG_REQ */ 177 val = PHY_NEW_REG_REQ | (GET_HIGH_NIBBLE(addr) << PHY_VCTRL_SHIFT); 178 writel(val, reg_gusb2phyacc0); 179 ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); 180 if (ret) 181 return (char)ret; 182 183 val = readl(reg_gusb2phyacc0); 184 185 return (char)(val & PHY_REG_DATA_MASK); 186} 187 188static int rtk_phy_write(struct phy_reg *phy_reg, char addr, char data) 189{ 190 unsigned int val; 191 void __iomem *reg_wrap_vstatus = phy_reg->reg_wrap_vstatus; 192 void __iomem *reg_gusb2phyacc0 = phy_reg->reg_gusb2phyacc0; 193 int shift_bits = phy_reg->vstatus_index * 8; 194 int ret = 0; 195 196 /* write data to VStatusOut2 (data output to phy) */ 197 writel((u32)data << shift_bits, reg_wrap_vstatus); 198 199 ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); 200 if (ret) 201 return ret; 202 203 /* VCtrl = low nibble of addr, set PHY_NEW_REG_REQ */ 204 val = PHY_NEW_REG_REQ | (GET_LOW_NIBBLE(addr) << PHY_VCTRL_SHIFT); 205 206 writel(val, reg_gusb2phyacc0); 207 ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); 208 if (ret) 209 return ret; 210 211 /* VCtrl = high nibble of addr, set PHY_NEW_REG_REQ */ 212 val = PHY_NEW_REG_REQ | (GET_HIGH_NIBBLE(addr) << PHY_VCTRL_SHIFT); 213 214 writel(val, reg_gusb2phyacc0); 215 ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); 216 if (ret) 217 return ret; 218 219 return 0; 220} 221 222static int rtk_phy_set_page(struct phy_reg *phy_reg, int page) 223{ 224 switch (page) { 225 case 0: 226 return rtk_phy_write(phy_reg, SET_PAGE_OFFSET, SET_PAGE_0); 227 case 1: 228 return rtk_phy_write(phy_reg, SET_PAGE_OFFSET, SET_PAGE_1); 229 case 2: 230 return rtk_phy_write(phy_reg, SET_PAGE_OFFSET, SET_PAGE_2); 231 default: 232 pr_err("%s error page=%d\n", __func__, page); 233 } 234 235 return -EINVAL; 236} 237 238static u8 __updated_dc_disconnect_level_page0_0xe4(struct phy_cfg *phy_cfg, 239 struct phy_parameter *phy_parameter, u8 data) 240{ 241 u8 ret; 242 s32 val; 243 s32 dc_disconnect_mask = phy_cfg->dc_disconnect_mask; 244 int offset = 4; 245 246 val = (s32)((data >> offset) & dc_disconnect_mask) 247 + phy_parameter->efuse_usb_dc_dis 248 + phy_parameter->disconnection_compensate; 249 250 if (val > dc_disconnect_mask) 251 val = dc_disconnect_mask; 252 else if (val < 0) 253 val = 0; 254 255 ret = (data & (~(dc_disconnect_mask << offset))) | 256 (val & dc_disconnect_mask) << offset; 257 258 return ret; 259} 260 261/* updated disconnect level at page0 */ 262static void update_dc_disconnect_level_at_page0(struct rtk_phy *rtk_phy, 263 struct phy_parameter *phy_parameter, bool update) 264{ 265 struct phy_cfg *phy_cfg; 266 struct phy_reg *phy_reg; 267 struct phy_data *phy_data_page; 268 struct phy_data *phy_data; 269 u8 addr, data; 270 int offset = 4; 271 s32 dc_disconnect_mask; 272 int i; 273 274 phy_cfg = rtk_phy->phy_cfg; 275 phy_reg = &phy_parameter->phy_reg; 276 277 /* Set page 0 */ 278 phy_data_page = phy_cfg->page0; 279 rtk_phy_set_page(phy_reg, 0); 280 281 i = page_addr_to_array_index(PAGE0_0XE4); 282 phy_data = phy_data_page + i; 283 if (!phy_data->addr) { 284 phy_data->addr = PAGE0_0XE4; 285 phy_data->data = rtk_phy_read(phy_reg, PAGE0_0XE4); 286 } 287 288 addr = phy_data->addr; 289 data = phy_data->data; 290 dc_disconnect_mask = phy_cfg->dc_disconnect_mask; 291 292 if (update) 293 data = __updated_dc_disconnect_level_page0_0xe4(phy_cfg, phy_parameter, data); 294 else 295 data = (data & ~(dc_disconnect_mask << offset)) | 296 (DEFAULT_DC_DISCONNECTION_VALUE << offset); 297 298 if (rtk_phy_write(phy_reg, addr, data)) 299 dev_err(rtk_phy->dev, 300 "%s: Error to set page1 parameter addr=0x%x value=0x%x\n", 301 __func__, addr, data); 302} 303 304static u8 __updated_dc_disconnect_level_page1_0xe2(struct phy_cfg *phy_cfg, 305 struct phy_parameter *phy_parameter, u8 data) 306{ 307 u8 ret; 308 s32 val; 309 s32 dc_disconnect_mask = phy_cfg->dc_disconnect_mask; 310 311 if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { 312 val = (s32)(data & dc_disconnect_mask) 313 + phy_parameter->efuse_usb_dc_dis 314 + phy_parameter->disconnection_compensate; 315 } else { /* for CHECK_EFUSE_V2 or no efuse */ 316 if (phy_parameter->efuse_usb_dc_dis) 317 val = (s32)(phy_parameter->efuse_usb_dc_dis + 318 phy_parameter->disconnection_compensate); 319 else 320 val = (s32)((data & dc_disconnect_mask) + 321 phy_parameter->disconnection_compensate); 322 } 323 324 if (val > dc_disconnect_mask) 325 val = dc_disconnect_mask; 326 else if (val < 0) 327 val = 0; 328 329 ret = (data & (~dc_disconnect_mask)) | (val & dc_disconnect_mask); 330 331 return ret; 332} 333 334/* updated disconnect level at page1 */ 335static void update_dc_disconnect_level_at_page1(struct rtk_phy *rtk_phy, 336 struct phy_parameter *phy_parameter, bool update) 337{ 338 struct phy_cfg *phy_cfg; 339 struct phy_data *phy_data_page; 340 struct phy_data *phy_data; 341 struct phy_reg *phy_reg; 342 u8 addr, data; 343 s32 dc_disconnect_mask; 344 int i; 345 346 phy_cfg = rtk_phy->phy_cfg; 347 phy_reg = &phy_parameter->phy_reg; 348 349 /* Set page 1 */ 350 phy_data_page = phy_cfg->page1; 351 rtk_phy_set_page(phy_reg, 1); 352 353 i = page_addr_to_array_index(PAGE1_0XE2); 354 phy_data = phy_data_page + i; 355 if (!phy_data->addr) { 356 phy_data->addr = PAGE1_0XE2; 357 phy_data->data = rtk_phy_read(phy_reg, PAGE1_0XE2); 358 } 359 360 addr = phy_data->addr; 361 data = phy_data->data; 362 dc_disconnect_mask = phy_cfg->dc_disconnect_mask; 363 364 if (update) 365 data = __updated_dc_disconnect_level_page1_0xe2(phy_cfg, phy_parameter, data); 366 else 367 data = (data & ~dc_disconnect_mask) | DEFAULT_DC_DISCONNECTION_VALUE; 368 369 if (rtk_phy_write(phy_reg, addr, data)) 370 dev_err(rtk_phy->dev, 371 "%s: Error to set page1 parameter addr=0x%x value=0x%x\n", 372 __func__, addr, data); 373} 374 375static void update_dc_disconnect_level(struct rtk_phy *rtk_phy, 376 struct phy_parameter *phy_parameter, bool update) 377{ 378 struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; 379 380 if (phy_cfg->usb_dc_disconnect_at_page0) 381 update_dc_disconnect_level_at_page0(rtk_phy, phy_parameter, update); 382 else 383 update_dc_disconnect_level_at_page1(rtk_phy, phy_parameter, update); 384} 385 386static u8 __update_dc_driving_page0_0xe4(struct phy_cfg *phy_cfg, 387 struct phy_parameter *phy_parameter, u8 data) 388{ 389 s32 driving_level_compensate = phy_parameter->driving_level_compensate; 390 s32 dc_driving_mask = phy_cfg->dc_driving_mask; 391 s32 val; 392 u8 ret; 393 394 if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { 395 val = (s32)(data & dc_driving_mask) + driving_level_compensate 396 + phy_parameter->efuse_usb_dc_cal; 397 } else { /* for CHECK_EFUSE_V2 or no efuse */ 398 if (phy_parameter->efuse_usb_dc_cal) 399 val = (s32)((phy_parameter->efuse_usb_dc_cal & dc_driving_mask) 400 + driving_level_compensate); 401 else 402 val = (s32)(data & dc_driving_mask); 403 } 404 405 if (val > dc_driving_mask) 406 val = dc_driving_mask; 407 else if (val < 0) 408 val = 0; 409 410 ret = (data & (~dc_driving_mask)) | (val & dc_driving_mask); 411 412 return ret; 413} 414 415static void update_dc_driving_level(struct rtk_phy *rtk_phy, 416 struct phy_parameter *phy_parameter) 417{ 418 struct phy_cfg *phy_cfg; 419 struct phy_reg *phy_reg; 420 421 phy_reg = &phy_parameter->phy_reg; 422 phy_cfg = rtk_phy->phy_cfg; 423 if (!phy_cfg->page0[4].addr) { 424 rtk_phy_set_page(phy_reg, 0); 425 phy_cfg->page0[4].addr = PAGE0_0XE4; 426 phy_cfg->page0[4].data = rtk_phy_read(phy_reg, PAGE0_0XE4); 427 } 428 429 if (phy_parameter->driving_level != DEFAULT_DC_DRIVING_VALUE) { 430 u32 dc_driving_mask; 431 u8 driving_level; 432 u8 data; 433 434 data = phy_cfg->page0[4].data; 435 dc_driving_mask = phy_cfg->dc_driving_mask; 436 driving_level = data & dc_driving_mask; 437 438 dev_dbg(rtk_phy->dev, "%s driving_level=%d => dts driving_level=%d\n", 439 __func__, driving_level, phy_parameter->driving_level); 440 441 phy_cfg->page0[4].data = (data & (~dc_driving_mask)) | 442 (phy_parameter->driving_level & dc_driving_mask); 443 } 444 445 phy_cfg->page0[4].data = __update_dc_driving_page0_0xe4(phy_cfg, 446 phy_parameter, 447 phy_cfg->page0[4].data); 448} 449 450static void update_hs_clk_select(struct rtk_phy *rtk_phy, 451 struct phy_parameter *phy_parameter) 452{ 453 struct phy_cfg *phy_cfg; 454 struct phy_reg *phy_reg; 455 456 phy_cfg = rtk_phy->phy_cfg; 457 phy_reg = &phy_parameter->phy_reg; 458 459 if (phy_parameter->inverse_hstx_sync_clock) { 460 if (!phy_cfg->page0[6].addr) { 461 rtk_phy_set_page(phy_reg, 0); 462 phy_cfg->page0[6].addr = PAGE0_0XE6; 463 phy_cfg->page0[6].data = rtk_phy_read(phy_reg, PAGE0_0XE6); 464 } 465 466 phy_cfg->page0[6].data = phy_cfg->page0[6].data | HS_CLK_SELECT; 467 } 468} 469 470static void do_rtk_phy_toggle(struct rtk_phy *rtk_phy, 471 int index, bool connect) 472{ 473 struct phy_parameter *phy_parameter; 474 struct phy_cfg *phy_cfg; 475 struct phy_reg *phy_reg; 476 struct phy_data *phy_data_page; 477 u8 addr, data; 478 int i; 479 480 phy_cfg = rtk_phy->phy_cfg; 481 phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; 482 phy_reg = &phy_parameter->phy_reg; 483 484 if (!phy_cfg->do_toggle) 485 goto out; 486 487 if (phy_cfg->is_double_sensitivity_mode) 488 goto do_toggle_driving; 489 490 /* Set page 0 */ 491 rtk_phy_set_page(phy_reg, 0); 492 493 addr = PAGE0_0XE7; 494 data = rtk_phy_read(phy_reg, addr); 495 496 if (connect) 497 rtk_phy_write(phy_reg, addr, data & (~SENSITIVITY_CTRL)); 498 else 499 rtk_phy_write(phy_reg, addr, data | (SENSITIVITY_CTRL)); 500 501do_toggle_driving: 502 503 if (!phy_cfg->do_toggle_driving) 504 goto do_toggle; 505 506 /* Page 0 addr 0xE4 driving capability */ 507 508 /* Set page 0 */ 509 phy_data_page = phy_cfg->page0; 510 rtk_phy_set_page(phy_reg, 0); 511 512 i = page_addr_to_array_index(PAGE0_0XE4); 513 addr = phy_data_page[i].addr; 514 data = phy_data_page[i].data; 515 516 if (connect) { 517 rtk_phy_write(phy_reg, addr, data); 518 } else { 519 u8 value; 520 s32 tmp; 521 s32 driving_updated = 522 phy_cfg->driving_updated_for_dev_dis; 523 s32 dc_driving_mask = phy_cfg->dc_driving_mask; 524 525 tmp = (s32)(data & dc_driving_mask) + driving_updated; 526 527 if (tmp > dc_driving_mask) 528 tmp = dc_driving_mask; 529 else if (tmp < 0) 530 tmp = 0; 531 532 value = (data & (~dc_driving_mask)) | (tmp & dc_driving_mask); 533 534 rtk_phy_write(phy_reg, addr, value); 535 } 536 537do_toggle: 538 /* restore dc disconnect level before toggle */ 539 update_dc_disconnect_level(rtk_phy, phy_parameter, false); 540 541 /* Set page 1 */ 542 rtk_phy_set_page(phy_reg, 1); 543 544 addr = PAGE1_0XE0; 545 data = rtk_phy_read(phy_reg, addr); 546 547 rtk_phy_write(phy_reg, addr, data & 548 (~ENABLE_AUTO_SENSITIVITY_CALIBRATION)); 549 mdelay(1); 550 rtk_phy_write(phy_reg, addr, data | 551 (ENABLE_AUTO_SENSITIVITY_CALIBRATION)); 552 553 /* update dc disconnect level after toggle */ 554 update_dc_disconnect_level(rtk_phy, phy_parameter, true); 555 556out: 557 return; 558} 559 560static int do_rtk_phy_init(struct rtk_phy *rtk_phy, int index) 561{ 562 struct phy_parameter *phy_parameter; 563 struct phy_cfg *phy_cfg; 564 struct phy_data *phy_data_page; 565 struct phy_reg *phy_reg; 566 int i; 567 568 phy_cfg = rtk_phy->phy_cfg; 569 phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; 570 phy_reg = &phy_parameter->phy_reg; 571 572 if (phy_cfg->use_default_parameter) { 573 dev_dbg(rtk_phy->dev, "%s phy#%d use default parameter\n", 574 __func__, index); 575 goto do_toggle; 576 } 577 578 /* Set page 0 */ 579 phy_data_page = phy_cfg->page0; 580 rtk_phy_set_page(phy_reg, 0); 581 582 for (i = 0; i < phy_cfg->page0_size; i++) { 583 struct phy_data *phy_data = phy_data_page + i; 584 u8 addr = phy_data->addr; 585 u8 data = phy_data->data; 586 587 if (!addr) 588 continue; 589 590 if (rtk_phy_write(phy_reg, addr, data)) { 591 dev_err(rtk_phy->dev, 592 "%s: Error to set page0 parameter addr=0x%x value=0x%x\n", 593 __func__, addr, data); 594 return -EINVAL; 595 } 596 } 597 598 /* Set page 1 */ 599 phy_data_page = phy_cfg->page1; 600 rtk_phy_set_page(phy_reg, 1); 601 602 for (i = 0; i < phy_cfg->page1_size; i++) { 603 struct phy_data *phy_data = phy_data_page + i; 604 u8 addr = phy_data->addr; 605 u8 data = phy_data->data; 606 607 if (!addr) 608 continue; 609 610 if (rtk_phy_write(phy_reg, addr, data)) { 611 dev_err(rtk_phy->dev, 612 "%s: Error to set page1 parameter addr=0x%x value=0x%x\n", 613 __func__, addr, data); 614 return -EINVAL; 615 } 616 } 617 618 if (phy_cfg->page2_size == 0) 619 goto do_toggle; 620 621 /* Set page 2 */ 622 phy_data_page = phy_cfg->page2; 623 rtk_phy_set_page(phy_reg, 2); 624 625 for (i = 0; i < phy_cfg->page2_size; i++) { 626 struct phy_data *phy_data = phy_data_page + i; 627 u8 addr = phy_data->addr; 628 u8 data = phy_data->data; 629 630 if (!addr) 631 continue; 632 633 if (rtk_phy_write(phy_reg, addr, data)) { 634 dev_err(rtk_phy->dev, 635 "%s: Error to set page2 parameter addr=0x%x value=0x%x\n", 636 __func__, addr, data); 637 return -EINVAL; 638 } 639 } 640 641do_toggle: 642 do_rtk_phy_toggle(rtk_phy, index, false); 643 644 return 0; 645} 646 647static int rtk_phy_init(struct phy *phy) 648{ 649 struct rtk_phy *rtk_phy = phy_get_drvdata(phy); 650 unsigned long phy_init_time = jiffies; 651 int i, ret = 0; 652 653 if (!rtk_phy) 654 return -EINVAL; 655 656 for (i = 0; i < rtk_phy->num_phy; i++) 657 ret = do_rtk_phy_init(rtk_phy, i); 658 659 dev_dbg(rtk_phy->dev, "Initialized RTK USB 2.0 PHY (take %dms)\n", 660 jiffies_to_msecs(jiffies - phy_init_time)); 661 return ret; 662} 663 664static int rtk_phy_exit(struct phy *phy) 665{ 666 return 0; 667} 668 669static void rtk_phy_toggle(struct rtk_phy *rtk_phy, bool connect, int port) 670{ 671 int index = port; 672 673 if (index > rtk_phy->num_phy) { 674 dev_err(rtk_phy->dev, "%s: The port=%d is not in usb phy (num_phy=%d)\n", 675 __func__, index, rtk_phy->num_phy); 676 return; 677 } 678 679 do_rtk_phy_toggle(rtk_phy, index, connect); 680} 681 682static int rtk_phy_connect(struct phy *phy, int port) 683{ 684 struct rtk_phy *rtk_phy = phy_get_drvdata(phy); 685 686 dev_dbg(rtk_phy->dev, "%s port=%d\n", __func__, port); 687 rtk_phy_toggle(rtk_phy, true, port); 688 689 return 0; 690} 691 692static int rtk_phy_disconnect(struct phy *phy, int port) 693{ 694 struct rtk_phy *rtk_phy = phy_get_drvdata(phy); 695 696 dev_dbg(rtk_phy->dev, "%s port=%d\n", __func__, port); 697 rtk_phy_toggle(rtk_phy, false, port); 698 699 return 0; 700} 701 702static const struct phy_ops ops = { 703 .init = rtk_phy_init, 704 .exit = rtk_phy_exit, 705 .connect = rtk_phy_connect, 706 .disconnect = rtk_phy_disconnect, 707 .owner = THIS_MODULE, 708}; 709 710#ifdef CONFIG_DEBUG_FS 711static struct dentry *create_phy_debug_root(void) 712{ 713 struct dentry *phy_debug_root; 714 715 phy_debug_root = debugfs_lookup("phy", usb_debug_root); 716 if (!phy_debug_root) 717 phy_debug_root = debugfs_create_dir("phy", usb_debug_root); 718 719 return phy_debug_root; 720} 721 722static int rtk_usb2_parameter_show(struct seq_file *s, void *unused) 723{ 724 struct rtk_phy *rtk_phy = s->private; 725 struct phy_cfg *phy_cfg; 726 int i, index; 727 728 phy_cfg = rtk_phy->phy_cfg; 729 730 seq_puts(s, "Property:\n"); 731 seq_printf(s, " check_efuse: %s\n", 732 phy_cfg->check_efuse ? "Enable" : "Disable"); 733 seq_printf(s, " check_efuse_version: %d\n", 734 phy_cfg->check_efuse_version); 735 seq_printf(s, " efuse_dc_driving_rate: %d\n", 736 phy_cfg->efuse_dc_driving_rate); 737 seq_printf(s, " dc_driving_mask: 0x%x\n", 738 phy_cfg->dc_driving_mask); 739 seq_printf(s, " efuse_dc_disconnect_rate: %d\n", 740 phy_cfg->efuse_dc_disconnect_rate); 741 seq_printf(s, " dc_disconnect_mask: 0x%x\n", 742 phy_cfg->dc_disconnect_mask); 743 seq_printf(s, " usb_dc_disconnect_at_page0: %s\n", 744 phy_cfg->usb_dc_disconnect_at_page0 ? "true" : "false"); 745 seq_printf(s, " do_toggle: %s\n", 746 phy_cfg->do_toggle ? "Enable" : "Disable"); 747 seq_printf(s, " do_toggle_driving: %s\n", 748 phy_cfg->do_toggle_driving ? "Enable" : "Disable"); 749 seq_printf(s, " driving_updated_for_dev_dis: 0x%x\n", 750 phy_cfg->driving_updated_for_dev_dis); 751 seq_printf(s, " use_default_parameter: %s\n", 752 phy_cfg->use_default_parameter ? "Enable" : "Disable"); 753 seq_printf(s, " is_double_sensitivity_mode: %s\n", 754 phy_cfg->is_double_sensitivity_mode ? "Enable" : "Disable"); 755 756 for (index = 0; index < rtk_phy->num_phy; index++) { 757 struct phy_parameter *phy_parameter; 758 struct phy_reg *phy_reg; 759 struct phy_data *phy_data_page; 760 761 phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; 762 phy_reg = &phy_parameter->phy_reg; 763 764 seq_printf(s, "PHY %d:\n", index); 765 766 seq_puts(s, "Page 0:\n"); 767 /* Set page 0 */ 768 phy_data_page = phy_cfg->page0; 769 rtk_phy_set_page(phy_reg, 0); 770 771 for (i = 0; i < phy_cfg->page0_size; i++) { 772 struct phy_data *phy_data = phy_data_page + i; 773 u8 addr = array_index_to_page_addr(i); 774 u8 data = phy_data->data; 775 u8 value = rtk_phy_read(phy_reg, addr); 776 777 if (phy_data->addr) 778 seq_printf(s, " Page 0: addr=0x%x data=0x%02x ==> read value=0x%02x\n", 779 addr, data, value); 780 else 781 seq_printf(s, " Page 0: addr=0x%x data=none ==> read value=0x%02x\n", 782 addr, value); 783 } 784 785 seq_puts(s, "Page 1:\n"); 786 /* Set page 1 */ 787 phy_data_page = phy_cfg->page1; 788 rtk_phy_set_page(phy_reg, 1); 789 790 for (i = 0; i < phy_cfg->page1_size; i++) { 791 struct phy_data *phy_data = phy_data_page + i; 792 u8 addr = array_index_to_page_addr(i); 793 u8 data = phy_data->data; 794 u8 value = rtk_phy_read(phy_reg, addr); 795 796 if (phy_data->addr) 797 seq_printf(s, " Page 1: addr=0x%x data=0x%02x ==> read value=0x%02x\n", 798 addr, data, value); 799 else 800 seq_printf(s, " Page 1: addr=0x%x data=none ==> read value=0x%02x\n", 801 addr, value); 802 } 803 804 if (phy_cfg->page2_size == 0) 805 goto out; 806 807 seq_puts(s, "Page 2:\n"); 808 /* Set page 2 */ 809 phy_data_page = phy_cfg->page2; 810 rtk_phy_set_page(phy_reg, 2); 811 812 for (i = 0; i < phy_cfg->page2_size; i++) { 813 struct phy_data *phy_data = phy_data_page + i; 814 u8 addr = array_index_to_page_addr(i); 815 u8 data = phy_data->data; 816 u8 value = rtk_phy_read(phy_reg, addr); 817 818 if (phy_data->addr) 819 seq_printf(s, " Page 2: addr=0x%x data=0x%02x ==> read value=0x%02x\n", 820 addr, data, value); 821 else 822 seq_printf(s, " Page 2: addr=0x%x data=none ==> read value=0x%02x\n", 823 addr, value); 824 } 825 826out: 827 seq_puts(s, "PHY Property:\n"); 828 seq_printf(s, " efuse_usb_dc_cal: %d\n", 829 (int)phy_parameter->efuse_usb_dc_cal); 830 seq_printf(s, " efuse_usb_dc_dis: %d\n", 831 (int)phy_parameter->efuse_usb_dc_dis); 832 seq_printf(s, " inverse_hstx_sync_clock: %s\n", 833 phy_parameter->inverse_hstx_sync_clock ? "Enable" : "Disable"); 834 seq_printf(s, " driving_level: %d\n", 835 phy_parameter->driving_level); 836 seq_printf(s, " driving_level_compensate: %d\n", 837 phy_parameter->driving_level_compensate); 838 seq_printf(s, " disconnection_compensate: %d\n", 839 phy_parameter->disconnection_compensate); 840 } 841 842 return 0; 843} 844DEFINE_SHOW_ATTRIBUTE(rtk_usb2_parameter); 845 846static inline void create_debug_files(struct rtk_phy *rtk_phy) 847{ 848 struct dentry *phy_debug_root = NULL; 849 850 phy_debug_root = create_phy_debug_root(); 851 if (!phy_debug_root) 852 return; 853 854 rtk_phy->debug_dir = debugfs_create_dir(dev_name(rtk_phy->dev), 855 phy_debug_root); 856 857 debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy, 858 &rtk_usb2_parameter_fops); 859} 860 861static inline void remove_debug_files(struct rtk_phy *rtk_phy) 862{ 863 debugfs_remove_recursive(rtk_phy->debug_dir); 864} 865#else 866static inline void create_debug_files(struct rtk_phy *rtk_phy) { } 867static inline void remove_debug_files(struct rtk_phy *rtk_phy) { } 868#endif /* CONFIG_DEBUG_FS */ 869 870static int get_phy_data_by_efuse(struct rtk_phy *rtk_phy, 871 struct phy_parameter *phy_parameter, int index) 872{ 873 struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; 874 u8 value = 0; 875 struct nvmem_cell *cell; 876 struct soc_device_attribute rtk_soc_groot[] = { 877 { .family = "Realtek Groot",}, 878 { /* empty */ } }; 879 880 if (!phy_cfg->check_efuse) 881 goto out; 882 883 /* Read efuse for usb dc cal */ 884 cell = nvmem_cell_get(rtk_phy->dev, "usb-dc-cal"); 885 if (IS_ERR(cell)) { 886 dev_dbg(rtk_phy->dev, "%s no usb-dc-cal: %ld\n", 887 __func__, PTR_ERR(cell)); 888 } else { 889 unsigned char *buf; 890 size_t buf_size; 891 892 buf = nvmem_cell_read(cell, &buf_size); 893 if (!IS_ERR(buf)) { 894 value = buf[0] & phy_cfg->dc_driving_mask; 895 kfree(buf); 896 } 897 nvmem_cell_put(cell); 898 } 899 900 if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { 901 int rate = phy_cfg->efuse_dc_driving_rate; 902 903 if (value <= EFUS_USB_DC_CAL_MAX) 904 phy_parameter->efuse_usb_dc_cal = (int8_t)(value * rate); 905 else 906 phy_parameter->efuse_usb_dc_cal = -(int8_t) 907 ((EFUS_USB_DC_CAL_MAX & value) * rate); 908 909 if (soc_device_match(rtk_soc_groot)) { 910 dev_dbg(rtk_phy->dev, "For groot IC we need a workaround to adjust efuse_usb_dc_cal\n"); 911 912 /* We don't multiple dc_cal_rate=2 for positive dc cal compensate */ 913 if (value <= EFUS_USB_DC_CAL_MAX) 914 phy_parameter->efuse_usb_dc_cal = (int8_t)(value); 915 916 /* We set max dc cal compensate is 0x8 if otp is 0x7 */ 917 if (value == 0x7) 918 phy_parameter->efuse_usb_dc_cal = (int8_t)(value + 1); 919 } 920 } else { /* for CHECK_EFUSE_V2 */ 921 phy_parameter->efuse_usb_dc_cal = value & phy_cfg->dc_driving_mask; 922 } 923 924 /* Read efuse for usb dc disconnect level */ 925 value = 0; 926 cell = nvmem_cell_get(rtk_phy->dev, "usb-dc-dis"); 927 if (IS_ERR(cell)) { 928 dev_dbg(rtk_phy->dev, "%s no usb-dc-dis: %ld\n", 929 __func__, PTR_ERR(cell)); 930 } else { 931 unsigned char *buf; 932 size_t buf_size; 933 934 buf = nvmem_cell_read(cell, &buf_size); 935 if (!IS_ERR(buf)) { 936 value = buf[0] & phy_cfg->dc_disconnect_mask; 937 kfree(buf); 938 } 939 nvmem_cell_put(cell); 940 } 941 942 if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { 943 int rate = phy_cfg->efuse_dc_disconnect_rate; 944 945 if (value <= EFUS_USB_DC_DIS_MAX) 946 phy_parameter->efuse_usb_dc_dis = (int8_t)(value * rate); 947 else 948 phy_parameter->efuse_usb_dc_dis = -(int8_t) 949 ((EFUS_USB_DC_DIS_MAX & value) * rate); 950 } else { /* for CHECK_EFUSE_V2 */ 951 phy_parameter->efuse_usb_dc_dis = value & phy_cfg->dc_disconnect_mask; 952 } 953 954out: 955 return 0; 956} 957 958static int parse_phy_data(struct rtk_phy *rtk_phy) 959{ 960 struct device *dev = rtk_phy->dev; 961 struct device_node *np = dev->of_node; 962 struct phy_parameter *phy_parameter; 963 int ret = 0; 964 int index; 965 966 rtk_phy->phy_parameter = devm_kzalloc(dev, sizeof(struct phy_parameter) * 967 rtk_phy->num_phy, GFP_KERNEL); 968 if (!rtk_phy->phy_parameter) 969 return -ENOMEM; 970 971 for (index = 0; index < rtk_phy->num_phy; index++) { 972 phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; 973 974 phy_parameter->phy_reg.reg_wrap_vstatus = of_iomap(np, 0); 975 phy_parameter->phy_reg.reg_gusb2phyacc0 = of_iomap(np, 1) + index; 976 phy_parameter->phy_reg.vstatus_index = index; 977 978 if (of_property_read_bool(np, "realtek,inverse-hstx-sync-clock")) 979 phy_parameter->inverse_hstx_sync_clock = true; 980 else 981 phy_parameter->inverse_hstx_sync_clock = false; 982 983 if (of_property_read_u32_index(np, "realtek,driving-level", 984 index, &phy_parameter->driving_level)) 985 phy_parameter->driving_level = DEFAULT_DC_DRIVING_VALUE; 986 987 if (of_property_read_u32_index(np, "realtek,driving-level-compensate", 988 index, &phy_parameter->driving_level_compensate)) 989 phy_parameter->driving_level_compensate = 0; 990 991 if (of_property_read_u32_index(np, "realtek,disconnection-compensate", 992 index, &phy_parameter->disconnection_compensate)) 993 phy_parameter->disconnection_compensate = 0; 994 995 get_phy_data_by_efuse(rtk_phy, phy_parameter, index); 996 997 update_dc_driving_level(rtk_phy, phy_parameter); 998 999 update_hs_clk_select(rtk_phy, phy_parameter); 1000 } 1001 1002 return ret; 1003} 1004 1005static int rtk_usb2phy_probe(struct platform_device *pdev) 1006{ 1007 struct rtk_phy *rtk_phy; 1008 struct device *dev = &pdev->dev; 1009 struct phy *generic_phy; 1010 struct phy_provider *phy_provider; 1011 const struct phy_cfg *phy_cfg; 1012 int ret = 0; 1013 1014 phy_cfg = of_device_get_match_data(dev); 1015 if (!phy_cfg) { 1016 dev_err(dev, "phy config are not assigned!\n"); 1017 return -EINVAL; 1018 } 1019 1020 rtk_phy = devm_kzalloc(dev, sizeof(*rtk_phy), GFP_KERNEL); 1021 if (!rtk_phy) 1022 return -ENOMEM; 1023 1024 rtk_phy->dev = &pdev->dev; 1025 rtk_phy->phy_cfg = devm_kzalloc(dev, sizeof(*phy_cfg), GFP_KERNEL); 1026 1027 memcpy(rtk_phy->phy_cfg, phy_cfg, sizeof(*phy_cfg)); 1028 1029 rtk_phy->num_phy = phy_cfg->num_phy; 1030 1031 ret = parse_phy_data(rtk_phy); 1032 if (ret) 1033 goto err; 1034 1035 platform_set_drvdata(pdev, rtk_phy); 1036 1037 generic_phy = devm_phy_create(rtk_phy->dev, NULL, &ops); 1038 if (IS_ERR(generic_phy)) 1039 return PTR_ERR(generic_phy); 1040 1041 phy_set_drvdata(generic_phy, rtk_phy); 1042 1043 phy_provider = devm_of_phy_provider_register(rtk_phy->dev, 1044 of_phy_simple_xlate); 1045 if (IS_ERR(phy_provider)) 1046 return PTR_ERR(phy_provider); 1047 1048 create_debug_files(rtk_phy); 1049 1050err: 1051 return ret; 1052} 1053 1054static void rtk_usb2phy_remove(struct platform_device *pdev) 1055{ 1056 struct rtk_phy *rtk_phy = platform_get_drvdata(pdev); 1057 1058 remove_debug_files(rtk_phy); 1059} 1060 1061static const struct phy_cfg rtd1295_phy_cfg = { 1062 .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, 1063 .page0 = { [0] = {0xe0, 0x90}, 1064 [3] = {0xe3, 0x3a}, 1065 [4] = {0xe4, 0x68}, 1066 [6] = {0xe6, 0x91}, 1067 [13] = {0xf5, 0x81}, 1068 [15] = {0xf7, 0x02}, }, 1069 .page1_size = 8, 1070 .page1 = { /* default parameter */ }, 1071 .page2_size = 0, 1072 .page2 = { /* no parameter */ }, 1073 .num_phy = 1, 1074 .check_efuse = false, 1075 .check_efuse_version = CHECK_EFUSE_V1, 1076 .efuse_dc_driving_rate = 1, 1077 .dc_driving_mask = 0xf, 1078 .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, 1079 .dc_disconnect_mask = 0xf, 1080 .usb_dc_disconnect_at_page0 = true, 1081 .do_toggle = true, 1082 .do_toggle_driving = false, 1083 .driving_updated_for_dev_dis = 0xf, 1084 .use_default_parameter = false, 1085 .is_double_sensitivity_mode = false, 1086}; 1087 1088static const struct phy_cfg rtd1395_phy_cfg = { 1089 .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, 1090 .page0 = { [4] = {0xe4, 0xac}, 1091 [13] = {0xf5, 0x00}, 1092 [15] = {0xf7, 0x02}, }, 1093 .page1_size = 8, 1094 .page1 = { /* default parameter */ }, 1095 .page2_size = 0, 1096 .page2 = { /* no parameter */ }, 1097 .num_phy = 1, 1098 .check_efuse = false, 1099 .check_efuse_version = CHECK_EFUSE_V1, 1100 .efuse_dc_driving_rate = 1, 1101 .dc_driving_mask = 0xf, 1102 .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, 1103 .dc_disconnect_mask = 0xf, 1104 .usb_dc_disconnect_at_page0 = true, 1105 .do_toggle = true, 1106 .do_toggle_driving = false, 1107 .driving_updated_for_dev_dis = 0xf, 1108 .use_default_parameter = false, 1109 .is_double_sensitivity_mode = false, 1110}; 1111 1112static const struct phy_cfg rtd1395_phy_cfg_2port = { 1113 .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, 1114 .page0 = { [4] = {0xe4, 0xac}, 1115 [13] = {0xf5, 0x00}, 1116 [15] = {0xf7, 0x02}, }, 1117 .page1_size = 8, 1118 .page1 = { /* default parameter */ }, 1119 .page2_size = 0, 1120 .page2 = { /* no parameter */ }, 1121 .num_phy = 2, 1122 .check_efuse = false, 1123 .check_efuse_version = CHECK_EFUSE_V1, 1124 .efuse_dc_driving_rate = 1, 1125 .dc_driving_mask = 0xf, 1126 .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, 1127 .dc_disconnect_mask = 0xf, 1128 .usb_dc_disconnect_at_page0 = true, 1129 .do_toggle = true, 1130 .do_toggle_driving = false, 1131 .driving_updated_for_dev_dis = 0xf, 1132 .use_default_parameter = false, 1133 .is_double_sensitivity_mode = false, 1134}; 1135 1136static const struct phy_cfg rtd1619_phy_cfg = { 1137 .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, 1138 .page0 = { [4] = {0xe4, 0x68}, }, 1139 .page1_size = 8, 1140 .page1 = { /* default parameter */ }, 1141 .page2_size = 0, 1142 .page2 = { /* no parameter */ }, 1143 .num_phy = 1, 1144 .check_efuse = true, 1145 .check_efuse_version = CHECK_EFUSE_V1, 1146 .efuse_dc_driving_rate = 1, 1147 .dc_driving_mask = 0xf, 1148 .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, 1149 .dc_disconnect_mask = 0xf, 1150 .usb_dc_disconnect_at_page0 = true, 1151 .do_toggle = true, 1152 .do_toggle_driving = false, 1153 .driving_updated_for_dev_dis = 0xf, 1154 .use_default_parameter = false, 1155 .is_double_sensitivity_mode = false, 1156}; 1157 1158static const struct phy_cfg rtd1319_phy_cfg = { 1159 .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, 1160 .page0 = { [0] = {0xe0, 0x18}, 1161 [4] = {0xe4, 0x6a}, 1162 [7] = {0xe7, 0x71}, 1163 [13] = {0xf5, 0x15}, 1164 [15] = {0xf7, 0x32}, }, 1165 .page1_size = 8, 1166 .page1 = { [3] = {0xe3, 0x44}, }, 1167 .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, 1168 .page2 = { [0] = {0xe0, 0x01}, }, 1169 .num_phy = 1, 1170 .check_efuse = true, 1171 .check_efuse_version = CHECK_EFUSE_V1, 1172 .efuse_dc_driving_rate = 1, 1173 .dc_driving_mask = 0xf, 1174 .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, 1175 .dc_disconnect_mask = 0xf, 1176 .usb_dc_disconnect_at_page0 = true, 1177 .do_toggle = true, 1178 .do_toggle_driving = true, 1179 .driving_updated_for_dev_dis = 0xf, 1180 .use_default_parameter = false, 1181 .is_double_sensitivity_mode = true, 1182}; 1183 1184static const struct phy_cfg rtd1312c_phy_cfg = { 1185 .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, 1186 .page0 = { [0] = {0xe0, 0x14}, 1187 [4] = {0xe4, 0x67}, 1188 [5] = {0xe5, 0x55}, }, 1189 .page1_size = 8, 1190 .page1 = { [3] = {0xe3, 0x23}, 1191 [6] = {0xe6, 0x58}, }, 1192 .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, 1193 .page2 = { /* default parameter */ }, 1194 .num_phy = 1, 1195 .check_efuse = true, 1196 .check_efuse_version = CHECK_EFUSE_V1, 1197 .efuse_dc_driving_rate = 1, 1198 .dc_driving_mask = 0xf, 1199 .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, 1200 .dc_disconnect_mask = 0xf, 1201 .usb_dc_disconnect_at_page0 = true, 1202 .do_toggle = true, 1203 .do_toggle_driving = true, 1204 .driving_updated_for_dev_dis = 0xf, 1205 .use_default_parameter = false, 1206 .is_double_sensitivity_mode = true, 1207}; 1208 1209static const struct phy_cfg rtd1619b_phy_cfg = { 1210 .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, 1211 .page0 = { [0] = {0xe0, 0xa3}, 1212 [4] = {0xe4, 0xa8}, 1213 [5] = {0xe5, 0x4f}, 1214 [6] = {0xe6, 0x02}, }, 1215 .page1_size = 8, 1216 .page1 = { [3] = {0xe3, 0x64}, }, 1217 .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, 1218 .page2 = { [7] = {0xe7, 0x45}, }, 1219 .num_phy = 1, 1220 .check_efuse = true, 1221 .check_efuse_version = CHECK_EFUSE_V1, 1222 .efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE, 1223 .dc_driving_mask = 0x1f, 1224 .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, 1225 .dc_disconnect_mask = 0xf, 1226 .usb_dc_disconnect_at_page0 = false, 1227 .do_toggle = true, 1228 .do_toggle_driving = true, 1229 .driving_updated_for_dev_dis = 0x8, 1230 .use_default_parameter = false, 1231 .is_double_sensitivity_mode = true, 1232}; 1233 1234static const struct phy_cfg rtd1319d_phy_cfg = { 1235 .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, 1236 .page0 = { [0] = {0xe0, 0xa3}, 1237 [4] = {0xe4, 0x8e}, 1238 [5] = {0xe5, 0x4f}, 1239 [6] = {0xe6, 0x02}, }, 1240 .page1_size = MAX_USB_PHY_PAGE1_DATA_SIZE, 1241 .page1 = { [14] = {0xf5, 0x1}, }, 1242 .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, 1243 .page2 = { [7] = {0xe7, 0x44}, }, 1244 .check_efuse = true, 1245 .num_phy = 1, 1246 .check_efuse_version = CHECK_EFUSE_V1, 1247 .efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE, 1248 .dc_driving_mask = 0x1f, 1249 .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, 1250 .dc_disconnect_mask = 0xf, 1251 .usb_dc_disconnect_at_page0 = false, 1252 .do_toggle = true, 1253 .do_toggle_driving = false, 1254 .driving_updated_for_dev_dis = 0x8, 1255 .use_default_parameter = false, 1256 .is_double_sensitivity_mode = true, 1257}; 1258 1259static const struct phy_cfg rtd1315e_phy_cfg = { 1260 .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, 1261 .page0 = { [0] = {0xe0, 0xa3}, 1262 [4] = {0xe4, 0x8c}, 1263 [5] = {0xe5, 0x4f}, 1264 [6] = {0xe6, 0x02}, }, 1265 .page1_size = MAX_USB_PHY_PAGE1_DATA_SIZE, 1266 .page1 = { [3] = {0xe3, 0x7f}, 1267 [14] = {0xf5, 0x01}, }, 1268 .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, 1269 .page2 = { [7] = {0xe7, 0x44}, }, 1270 .num_phy = 1, 1271 .check_efuse = true, 1272 .check_efuse_version = CHECK_EFUSE_V2, 1273 .efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE, 1274 .dc_driving_mask = 0x1f, 1275 .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, 1276 .dc_disconnect_mask = 0xf, 1277 .usb_dc_disconnect_at_page0 = false, 1278 .do_toggle = true, 1279 .do_toggle_driving = false, 1280 .driving_updated_for_dev_dis = 0x8, 1281 .use_default_parameter = false, 1282 .is_double_sensitivity_mode = true, 1283}; 1284 1285static const struct of_device_id usbphy_rtk_dt_match[] = { 1286 { .compatible = "realtek,rtd1295-usb2phy", .data = &rtd1295_phy_cfg }, 1287 { .compatible = "realtek,rtd1312c-usb2phy", .data = &rtd1312c_phy_cfg }, 1288 { .compatible = "realtek,rtd1315e-usb2phy", .data = &rtd1315e_phy_cfg }, 1289 { .compatible = "realtek,rtd1319-usb2phy", .data = &rtd1319_phy_cfg }, 1290 { .compatible = "realtek,rtd1319d-usb2phy", .data = &rtd1319d_phy_cfg }, 1291 { .compatible = "realtek,rtd1395-usb2phy", .data = &rtd1395_phy_cfg }, 1292 { .compatible = "realtek,rtd1395-usb2phy-2port", .data = &rtd1395_phy_cfg_2port }, 1293 { .compatible = "realtek,rtd1619-usb2phy", .data = &rtd1619_phy_cfg }, 1294 { .compatible = "realtek,rtd1619b-usb2phy", .data = &rtd1619b_phy_cfg }, 1295 {}, 1296}; 1297MODULE_DEVICE_TABLE(of, usbphy_rtk_dt_match); 1298 1299static struct platform_driver rtk_usb2phy_driver = { 1300 .probe = rtk_usb2phy_probe, 1301 .remove_new = rtk_usb2phy_remove, 1302 .driver = { 1303 .name = "rtk-usb2phy", 1304 .of_match_table = usbphy_rtk_dt_match, 1305 }, 1306}; 1307 1308module_platform_driver(rtk_usb2phy_driver); 1309 1310MODULE_LICENSE("GPL"); 1311MODULE_AUTHOR("Stanley Chang <stanley_chang@realtek.com>"); 1312MODULE_DESCRIPTION("Realtek usb 2.0 phy driver"); 1313