1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Phy provider for USB 3.0 controller on HiSilicon 3660 platform
4 *
5 * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
6 *		http://www.huawei.com
7 *
8 * Authors: Yu Chen <chenyu56@huawei.com>
9 */
10
11#include <linux/kernel.h>
12#include <linux/mfd/syscon.h>
13#include <linux/module.h>
14#include <linux/of.h>
15#include <linux/phy/phy.h>
16#include <linux/platform_device.h>
17#include <linux/regmap.h>
18
19#define PERI_CRG_CLK_EN4			0x40
20#define PERI_CRG_CLK_DIS4			0x44
21#define GT_CLK_USB3OTG_REF			BIT(0)
22#define GT_ACLK_USB3OTG				BIT(1)
23
24#define PERI_CRG_RSTEN4				0x90
25#define PERI_CRG_RSTDIS4			0x94
26#define IP_RST_USB3OTGPHY_POR			BIT(3)
27#define IP_RST_USB3OTG				BIT(5)
28
29#define PERI_CRG_ISODIS				0x148
30#define USB_REFCLK_ISO_EN			BIT(25)
31
32#define PCTRL_PERI_CTRL3			0x10
33#define PCTRL_PERI_CTRL3_MSK_START		16
34#define USB_TCXO_EN				BIT(1)
35
36#define PCTRL_PERI_CTRL24			0x64
37#define SC_CLK_USB3PHY_3MUX1_SEL		BIT(25)
38
39#define USBOTG3_CTRL0				0x00
40#define SC_USB3PHY_ABB_GT_EN			BIT(15)
41
42#define USBOTG3_CTRL2				0x08
43#define USBOTG3CTRL2_POWERDOWN_HSP		BIT(0)
44#define USBOTG3CTRL2_POWERDOWN_SSP		BIT(1)
45
46#define USBOTG3_CTRL3				0x0C
47#define USBOTG3_CTRL3_VBUSVLDEXT		BIT(6)
48#define USBOTG3_CTRL3_VBUSVLDEXTSEL		BIT(5)
49
50#define USBOTG3_CTRL4				0x10
51
52#define USBOTG3_CTRL7				0x1c
53#define REF_SSP_EN				BIT(16)
54
55/* This value config the default txtune parameter of the usb 2.0 phy */
56#define HI3660_USB_DEFAULT_PHY_PARAM		0x1c466e3
57
58struct hi3660_priv {
59	struct device *dev;
60	struct regmap *peri_crg;
61	struct regmap *pctrl;
62	struct regmap *otg_bc;
63	u32 eye_diagram_param;
64};
65
66static int hi3660_phy_init(struct phy *phy)
67{
68	struct hi3660_priv *priv = phy_get_drvdata(phy);
69	u32 val, mask;
70	int ret;
71
72	/* usb refclk iso disable */
73	ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN);
74	if (ret)
75		goto out;
76
77	/* enable usb_tcxo_en */
78	val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
79	ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
80	if (ret)
81		goto out;
82
83	/* assert phy */
84	val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
85	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
86	if (ret)
87		goto out;
88
89	/* enable phy ref clk */
90	val = SC_USB3PHY_ABB_GT_EN;
91	mask = val;
92	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val);
93	if (ret)
94		goto out;
95
96	val = REF_SSP_EN;
97	mask = val;
98	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val);
99	if (ret)
100		goto out;
101
102	/* exit from IDDQ mode */
103	mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP;
104	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0);
105	if (ret)
106		goto out;
107
108	/* delay for exit from IDDQ mode */
109	usleep_range(100, 120);
110
111	/* deassert phy */
112	val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
113	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val);
114	if (ret)
115		goto out;
116
117	/* delay for phy deasserted */
118	usleep_range(10000, 15000);
119
120	/* fake vbus valid signal */
121	val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL;
122	mask = val;
123	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val);
124	if (ret)
125		goto out;
126
127	/* delay for vbus valid */
128	usleep_range(100, 120);
129
130	ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4,
131			priv->eye_diagram_param);
132	if (ret)
133		goto out;
134
135	return 0;
136out:
137	dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
138	return ret;
139}
140
141static int hi3660_phy_exit(struct phy *phy)
142{
143	struct hi3660_priv *priv = phy_get_drvdata(phy);
144	u32 val;
145	int ret;
146
147	/* assert phy */
148	val = IP_RST_USB3OTGPHY_POR;
149	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
150	if (ret)
151		goto out;
152
153	/* disable usb_tcxo_en */
154	val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START;
155	ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
156	if (ret)
157		goto out;
158
159	return 0;
160out:
161	dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
162	return ret;
163}
164
165static const struct phy_ops hi3660_phy_ops = {
166	.init		= hi3660_phy_init,
167	.exit		= hi3660_phy_exit,
168	.owner		= THIS_MODULE,
169};
170
171static int hi3660_phy_probe(struct platform_device *pdev)
172{
173	struct phy_provider *phy_provider;
174	struct device *dev = &pdev->dev;
175	struct phy *phy;
176	struct hi3660_priv *priv;
177
178	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
179	if (!priv)
180		return -ENOMEM;
181
182	priv->dev = dev;
183	priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
184					"hisilicon,pericrg-syscon");
185	if (IS_ERR(priv->peri_crg)) {
186		dev_err(dev, "no hisilicon,pericrg-syscon\n");
187		return PTR_ERR(priv->peri_crg);
188	}
189
190	priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
191					"hisilicon,pctrl-syscon");
192	if (IS_ERR(priv->pctrl)) {
193		dev_err(dev, "no hisilicon,pctrl-syscon\n");
194		return PTR_ERR(priv->pctrl);
195	}
196
197	/* node of hi3660 phy is a sub-node of usb3_otg_bc */
198	priv->otg_bc = syscon_node_to_regmap(dev->parent->of_node);
199	if (IS_ERR(priv->otg_bc)) {
200		dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
201		return PTR_ERR(priv->otg_bc);
202	}
203
204	if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
205		&(priv->eye_diagram_param)))
206		priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM;
207
208	phy = devm_phy_create(dev, NULL, &hi3660_phy_ops);
209	if (IS_ERR(phy))
210		return PTR_ERR(phy);
211
212	phy_set_drvdata(phy, priv);
213	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
214	return PTR_ERR_OR_ZERO(phy_provider);
215}
216
217static const struct of_device_id hi3660_phy_of_match[] = {
218	{.compatible = "hisilicon,hi3660-usb-phy",},
219	{ }
220};
221MODULE_DEVICE_TABLE(of, hi3660_phy_of_match);
222
223static struct platform_driver hi3660_phy_driver = {
224	.probe	= hi3660_phy_probe,
225	.driver = {
226		.name	= "hi3660-usb-phy",
227		.of_match_table	= hi3660_phy_of_match,
228	}
229};
230module_platform_driver(hi3660_phy_driver);
231
232MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
233MODULE_LICENSE("GPL v2");
234MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver");
235