1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * IBM Hot Plug Controller Driver 4 * 5 * Written By: Irene Zubarev, IBM Corporation 6 * 7 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) 8 * Copyright (C) 2001,2002 IBM Corp. 9 * 10 * All rights reserved. 11 * 12 * Send feedback to <gregkh@us.ibm.com> 13 * 14 */ 15 16#include <linux/module.h> 17#include <linux/slab.h> 18#include <linux/pci.h> 19#include <linux/list.h> 20#include "ibmphp.h" 21 22 23static int configure_device(struct pci_func *); 24static int configure_bridge(struct pci_func **, u8); 25static struct res_needed *scan_behind_bridge(struct pci_func *, u8); 26static int add_new_bus(struct bus_node *, struct resource_node *, struct resource_node *, struct resource_node *, u8); 27static u8 find_sec_number(u8 primary_busno, u8 slotno); 28 29/* 30 * NOTE..... If BIOS doesn't provide default routing, we assign: 31 * 9 for SCSI, 10 for LAN adapters, and 11 for everything else. 32 * If adapter is bridged, then we assign 11 to it and devices behind it. 33 * We also assign the same irq numbers for multi function devices. 34 * These are PIC mode, so shouldn't matter n.e.ways (hopefully) 35 */ 36static void assign_alt_irq(struct pci_func *cur_func, u8 class_code) 37{ 38 int j; 39 for (j = 0; j < 4; j++) { 40 if (cur_func->irq[j] == 0xff) { 41 switch (class_code) { 42 case PCI_BASE_CLASS_STORAGE: 43 cur_func->irq[j] = SCSI_IRQ; 44 break; 45 case PCI_BASE_CLASS_NETWORK: 46 cur_func->irq[j] = LAN_IRQ; 47 break; 48 default: 49 cur_func->irq[j] = OTHER_IRQ; 50 break; 51 } 52 } 53 } 54} 55 56/* 57 * Configures the device to be added (will allocate needed resources if it 58 * can), the device can be a bridge or a regular pci device, can also be 59 * multi-functional 60 * 61 * Input: function to be added 62 * 63 * TO DO: The error case with Multifunction device or multi function bridge, 64 * if there is an error, will need to go through all previous functions and 65 * unconfigure....or can add some code into unconfigure_card.... 66 */ 67int ibmphp_configure_card(struct pci_func *func, u8 slotno) 68{ 69 u16 vendor_id; 70 u32 class; 71 u8 class_code; 72 u8 hdr_type, device, sec_number; 73 u8 function; 74 struct pci_func *newfunc; /* for multi devices */ 75 struct pci_func *cur_func, *prev_func; 76 int rc, i, j; 77 int cleanup_count; 78 u8 flag; 79 u8 valid_device = 0x00; /* to see if we are able to read from card any device info at all */ 80 81 debug("inside configure_card, func->busno = %x\n", func->busno); 82 83 device = func->device; 84 cur_func = func; 85 86 /* We only get bus and device from IRQ routing table. So at this point, 87 * func->busno is correct, and func->device contains only device (at the 5 88 * highest bits) 89 */ 90 91 /* For every function on the card */ 92 for (function = 0x00; function < 0x08; function++) { 93 unsigned int devfn = PCI_DEVFN(device, function); 94 ibmphp_pci_bus->number = cur_func->busno; 95 96 cur_func->function = function; 97 98 debug("inside the loop, cur_func->busno = %x, cur_func->device = %x, cur_func->function = %x\n", 99 cur_func->busno, cur_func->device, cur_func->function); 100 101 pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id); 102 103 debug("vendor_id is %x\n", vendor_id); 104 if (vendor_id != PCI_VENDOR_ID_NOTVALID) { 105 /* found correct device!!! */ 106 debug("found valid device, vendor_id = %x\n", vendor_id); 107 108 ++valid_device; 109 110 /* header: x x x x x x x x 111 * | |___________|=> 1=PPB bridge, 0=normal device, 2=CardBus Bridge 112 * |_=> 0 = single function device, 1 = multi-function device 113 */ 114 115 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type); 116 pci_bus_read_config_dword(ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class); 117 118 class_code = class >> 24; 119 debug("hrd_type = %x, class = %x, class_code %x\n", hdr_type, class, class_code); 120 class >>= 8; /* to take revision out, class = class.subclass.prog i/f */ 121 if (class == PCI_CLASS_NOT_DEFINED_VGA) { 122 err("The device %x is VGA compatible and as is not supported for hot plugging. " 123 "Please choose another device.\n", cur_func->device); 124 return -ENODEV; 125 } else if (class == PCI_CLASS_DISPLAY_VGA) { 126 err("The device %x is not supported for hot plugging. Please choose another device.\n", 127 cur_func->device); 128 return -ENODEV; 129 } 130 switch (hdr_type) { 131 case PCI_HEADER_TYPE_NORMAL: 132 debug("single device case.... vendor id = %x, hdr_type = %x, class = %x\n", vendor_id, hdr_type, class); 133 assign_alt_irq(cur_func, class_code); 134 rc = configure_device(cur_func); 135 if (rc < 0) { 136 /* We need to do this in case some other BARs were properly inserted */ 137 err("was not able to configure devfunc %x on bus %x.\n", 138 cur_func->device, cur_func->busno); 139 cleanup_count = 6; 140 goto error; 141 } 142 cur_func->next = NULL; 143 function = 0x8; 144 break; 145 case PCI_HEADER_TYPE_MULTIDEVICE: 146 assign_alt_irq(cur_func, class_code); 147 rc = configure_device(cur_func); 148 if (rc < 0) { 149 /* We need to do this in case some other BARs were properly inserted */ 150 err("was not able to configure devfunc %x on bus %x...bailing out\n", 151 cur_func->device, cur_func->busno); 152 cleanup_count = 6; 153 goto error; 154 } 155 newfunc = kzalloc(sizeof(*newfunc), GFP_KERNEL); 156 if (!newfunc) 157 return -ENOMEM; 158 159 newfunc->busno = cur_func->busno; 160 newfunc->device = device; 161 cur_func->next = newfunc; 162 cur_func = newfunc; 163 for (j = 0; j < 4; j++) 164 newfunc->irq[j] = cur_func->irq[j]; 165 break; 166 case PCI_HEADER_TYPE_MULTIBRIDGE: 167 class >>= 8; 168 if (class != PCI_CLASS_BRIDGE_PCI) { 169 err("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. Please insert another card.\n", 170 cur_func->device); 171 return -ENODEV; 172 } 173 assign_alt_irq(cur_func, class_code); 174 rc = configure_bridge(&cur_func, slotno); 175 if (rc == -ENODEV) { 176 err("You chose to insert Single Bridge, or nested bridges, this is not supported...\n"); 177 err("Bus %x, devfunc %x\n", cur_func->busno, cur_func->device); 178 return rc; 179 } 180 if (rc) { 181 /* We need to do this in case some other BARs were properly inserted */ 182 err("was not able to hot-add PPB properly.\n"); 183 func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */ 184 cleanup_count = 2; 185 goto error; 186 } 187 188 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); 189 flag = 0; 190 for (i = 0; i < 32; i++) { 191 if (func->devices[i]) { 192 newfunc = kzalloc(sizeof(*newfunc), GFP_KERNEL); 193 if (!newfunc) 194 return -ENOMEM; 195 196 newfunc->busno = sec_number; 197 newfunc->device = (u8) i; 198 for (j = 0; j < 4; j++) 199 newfunc->irq[j] = cur_func->irq[j]; 200 201 if (flag) { 202 for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next) ; 203 prev_func->next = newfunc; 204 } else 205 cur_func->next = newfunc; 206 207 rc = ibmphp_configure_card(newfunc, slotno); 208 /* This could only happen if kmalloc failed */ 209 if (rc) { 210 /* We need to do this in case bridge itself got configured properly, but devices behind it failed */ 211 func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */ 212 cleanup_count = 2; 213 goto error; 214 } 215 flag = 1; 216 } 217 } 218 219 newfunc = kzalloc(sizeof(*newfunc), GFP_KERNEL); 220 if (!newfunc) 221 return -ENOMEM; 222 223 newfunc->busno = cur_func->busno; 224 newfunc->device = device; 225 for (j = 0; j < 4; j++) 226 newfunc->irq[j] = cur_func->irq[j]; 227 for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next); 228 prev_func->next = newfunc; 229 cur_func = newfunc; 230 break; 231 case PCI_HEADER_TYPE_BRIDGE: 232 class >>= 8; 233 debug("class now is %x\n", class); 234 if (class != PCI_CLASS_BRIDGE_PCI) { 235 err("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. Please insert another card.\n", 236 cur_func->device); 237 return -ENODEV; 238 } 239 240 assign_alt_irq(cur_func, class_code); 241 242 debug("cur_func->busno b4 configure_bridge is %x\n", cur_func->busno); 243 rc = configure_bridge(&cur_func, slotno); 244 if (rc == -ENODEV) { 245 err("You chose to insert Single Bridge, or nested bridges, this is not supported...\n"); 246 err("Bus %x, devfunc %x\n", cur_func->busno, cur_func->device); 247 return rc; 248 } 249 if (rc) { 250 /* We need to do this in case some other BARs were properly inserted */ 251 func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */ 252 err("was not able to hot-add PPB properly.\n"); 253 cleanup_count = 2; 254 goto error; 255 } 256 debug("cur_func->busno = %x, device = %x, function = %x\n", 257 cur_func->busno, device, function); 258 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); 259 debug("after configuring bridge..., sec_number = %x\n", sec_number); 260 flag = 0; 261 for (i = 0; i < 32; i++) { 262 if (func->devices[i]) { 263 debug("inside for loop, device is %x\n", i); 264 newfunc = kzalloc(sizeof(*newfunc), GFP_KERNEL); 265 if (!newfunc) 266 return -ENOMEM; 267 268 newfunc->busno = sec_number; 269 newfunc->device = (u8) i; 270 for (j = 0; j < 4; j++) 271 newfunc->irq[j] = cur_func->irq[j]; 272 273 if (flag) { 274 for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next); 275 prev_func->next = newfunc; 276 } else 277 cur_func->next = newfunc; 278 279 rc = ibmphp_configure_card(newfunc, slotno); 280 281 /* Again, this case should not happen... For complete paranoia, will need to call remove_bus */ 282 if (rc) { 283 /* We need to do this in case some other BARs were properly inserted */ 284 func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */ 285 cleanup_count = 2; 286 goto error; 287 } 288 flag = 1; 289 } 290 } 291 292 function = 0x8; 293 break; 294 default: 295 err("MAJOR PROBLEM!!!!, header type not supported? %x\n", hdr_type); 296 return -ENXIO; 297 } /* end of switch */ 298 } /* end of valid device */ 299 } /* end of for */ 300 301 if (!valid_device) { 302 err("Cannot find any valid devices on the card. Or unable to read from card.\n"); 303 return -ENODEV; 304 } 305 306 return 0; 307 308error: 309 for (i = 0; i < cleanup_count; i++) { 310 if (cur_func->io[i]) { 311 ibmphp_remove_resource(cur_func->io[i]); 312 cur_func->io[i] = NULL; 313 } else if (cur_func->pfmem[i]) { 314 ibmphp_remove_resource(cur_func->pfmem[i]); 315 cur_func->pfmem[i] = NULL; 316 } else if (cur_func->mem[i]) { 317 ibmphp_remove_resource(cur_func->mem[i]); 318 cur_func->mem[i] = NULL; 319 } 320 } 321 return rc; 322} 323 324/* 325 * This function configures the pci BARs of a single device. 326 * Input: pointer to the pci_func 327 * Output: configured PCI, 0, or error 328 */ 329static int configure_device(struct pci_func *func) 330{ 331 u32 bar[6]; 332 static const u32 address[] = { 333 PCI_BASE_ADDRESS_0, 334 PCI_BASE_ADDRESS_1, 335 PCI_BASE_ADDRESS_2, 336 PCI_BASE_ADDRESS_3, 337 PCI_BASE_ADDRESS_4, 338 PCI_BASE_ADDRESS_5, 339 0 340 }; 341 u8 irq; 342 int count; 343 int len[6]; 344 struct resource_node *io[6]; 345 struct resource_node *mem[6]; 346 struct resource_node *mem_tmp; 347 struct resource_node *pfmem[6]; 348 unsigned int devfn; 349 350 debug("%s - inside\n", __func__); 351 352 devfn = PCI_DEVFN(func->device, func->function); 353 ibmphp_pci_bus->number = func->busno; 354 355 for (count = 0; address[count]; count++) { /* for 6 BARs */ 356 357 /* not sure if i need this. per scott, said maybe need * something like this 358 if devices don't adhere 100% to the spec, so don't want to write 359 to the reserved bits 360 361 pcibios_read_config_byte(cur_func->busno, cur_func->device, 362 PCI_BASE_ADDRESS_0 + 4 * count, &tmp); 363 if (tmp & 0x01) // IO 364 pcibios_write_config_dword(cur_func->busno, cur_func->device, 365 PCI_BASE_ADDRESS_0 + 4 * count, 0xFFFFFFFD); 366 else // Memory 367 pcibios_write_config_dword(cur_func->busno, cur_func->device, 368 PCI_BASE_ADDRESS_0 + 4 * count, 0xFFFFFFFF); 369 */ 370 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); 371 pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &bar[count]); 372 373 if (!bar[count]) /* This BAR is not implemented */ 374 continue; 375 376 debug("Device %x BAR %d wants %x\n", func->device, count, bar[count]); 377 378 if (bar[count] & PCI_BASE_ADDRESS_SPACE_IO) { 379 /* This is IO */ 380 debug("inside IO SPACE\n"); 381 382 len[count] = bar[count] & 0xFFFFFFFC; 383 len[count] = ~len[count] + 1; 384 385 debug("len[count] in IO %x, count %d\n", len[count], count); 386 387 io[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); 388 389 if (!io[count]) 390 return -ENOMEM; 391 392 io[count]->type = IO; 393 io[count]->busno = func->busno; 394 io[count]->devfunc = PCI_DEVFN(func->device, func->function); 395 io[count]->len = len[count]; 396 if (ibmphp_check_resource(io[count], 0) == 0) { 397 ibmphp_add_resource(io[count]); 398 func->io[count] = io[count]; 399 } else { 400 err("cannot allocate requested io for bus %x device %x function %x len %x\n", 401 func->busno, func->device, func->function, len[count]); 402 kfree(io[count]); 403 return -EIO; 404 } 405 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], func->io[count]->start); 406 407 /* _______________This is for debugging purposes only_____________________ */ 408 debug("b4 writing, the IO address is %x\n", func->io[count]->start); 409 pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &bar[count]); 410 debug("after writing.... the start address is %x\n", bar[count]); 411 /* _________________________________________________________________________*/ 412 413 } else { 414 /* This is Memory */ 415 if (bar[count] & PCI_BASE_ADDRESS_MEM_PREFETCH) { 416 /* pfmem */ 417 debug("PFMEM SPACE\n"); 418 419 len[count] = bar[count] & 0xFFFFFFF0; 420 len[count] = ~len[count] + 1; 421 422 debug("len[count] in PFMEM %x, count %d\n", len[count], count); 423 424 pfmem[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); 425 if (!pfmem[count]) 426 return -ENOMEM; 427 428 pfmem[count]->type = PFMEM; 429 pfmem[count]->busno = func->busno; 430 pfmem[count]->devfunc = PCI_DEVFN(func->device, 431 func->function); 432 pfmem[count]->len = len[count]; 433 pfmem[count]->fromMem = 0; 434 if (ibmphp_check_resource(pfmem[count], 0) == 0) { 435 ibmphp_add_resource(pfmem[count]); 436 func->pfmem[count] = pfmem[count]; 437 } else { 438 mem_tmp = kzalloc(sizeof(*mem_tmp), GFP_KERNEL); 439 if (!mem_tmp) { 440 kfree(pfmem[count]); 441 return -ENOMEM; 442 } 443 mem_tmp->type = MEM; 444 mem_tmp->busno = pfmem[count]->busno; 445 mem_tmp->devfunc = pfmem[count]->devfunc; 446 mem_tmp->len = pfmem[count]->len; 447 debug("there's no pfmem... going into mem.\n"); 448 if (ibmphp_check_resource(mem_tmp, 0) == 0) { 449 ibmphp_add_resource(mem_tmp); 450 pfmem[count]->fromMem = 1; 451 pfmem[count]->rangeno = mem_tmp->rangeno; 452 pfmem[count]->start = mem_tmp->start; 453 pfmem[count]->end = mem_tmp->end; 454 ibmphp_add_pfmem_from_mem(pfmem[count]); 455 func->pfmem[count] = pfmem[count]; 456 } else { 457 err("cannot allocate requested pfmem for bus %x, device %x, len %x\n", 458 func->busno, func->device, len[count]); 459 kfree(mem_tmp); 460 kfree(pfmem[count]); 461 return -EIO; 462 } 463 } 464 465 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], func->pfmem[count]->start); 466 467 /*_______________This is for debugging purposes only______________________________*/ 468 debug("b4 writing, start address is %x\n", func->pfmem[count]->start); 469 pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &bar[count]); 470 debug("after writing, start address is %x\n", bar[count]); 471 /*_________________________________________________________________________________*/ 472 473 if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) { /* takes up another dword */ 474 debug("inside the mem 64 case, count %d\n", count); 475 count += 1; 476 /* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */ 477 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0x00000000); 478 } 479 } else { 480 /* regular memory */ 481 debug("REGULAR MEM SPACE\n"); 482 483 len[count] = bar[count] & 0xFFFFFFF0; 484 len[count] = ~len[count] + 1; 485 486 debug("len[count] in Mem %x, count %d\n", len[count], count); 487 488 mem[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); 489 if (!mem[count]) 490 return -ENOMEM; 491 492 mem[count]->type = MEM; 493 mem[count]->busno = func->busno; 494 mem[count]->devfunc = PCI_DEVFN(func->device, 495 func->function); 496 mem[count]->len = len[count]; 497 if (ibmphp_check_resource(mem[count], 0) == 0) { 498 ibmphp_add_resource(mem[count]); 499 func->mem[count] = mem[count]; 500 } else { 501 err("cannot allocate requested mem for bus %x, device %x, len %x\n", 502 func->busno, func->device, len[count]); 503 kfree(mem[count]); 504 return -EIO; 505 } 506 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], func->mem[count]->start); 507 /* _______________________This is for debugging purposes only _______________________*/ 508 debug("b4 writing, start address is %x\n", func->mem[count]->start); 509 pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &bar[count]); 510 debug("after writing, the address is %x\n", bar[count]); 511 /* __________________________________________________________________________________*/ 512 513 if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) { 514 /* takes up another dword */ 515 debug("inside mem 64 case, reg. mem, count %d\n", count); 516 count += 1; 517 /* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */ 518 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0x00000000); 519 } 520 } 521 } /* end of mem */ 522 } /* end of for */ 523 524 func->bus = 0; /* To indicate that this is not a PPB */ 525 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_INTERRUPT_PIN, &irq); 526 if ((irq > 0x00) && (irq < 0x05)) 527 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_INTERRUPT_LINE, func->irq[irq - 1]); 528 529 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_CACHE_LINE_SIZE, CACHE); 530 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_LATENCY_TIMER, LATENCY); 531 532 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, PCI_ROM_ADDRESS, 0x00L); 533 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_COMMAND, DEVICEENABLE); 534 535 return 0; 536} 537 538/****************************************************************************** 539 * This routine configures a PCI-2-PCI bridge and the functions behind it 540 * Parameters: pci_func 541 * Returns: 542 ******************************************************************************/ 543static int configure_bridge(struct pci_func **func_passed, u8 slotno) 544{ 545 int count; 546 int i; 547 int rc; 548 u8 sec_number; 549 u8 io_base; 550 u16 pfmem_base; 551 u32 bar[2]; 552 u32 len[2]; 553 u8 flag_io = 0; 554 u8 flag_mem = 0; 555 u8 flag_pfmem = 0; 556 u8 need_io_upper = 0; 557 u8 need_pfmem_upper = 0; 558 struct res_needed *amount_needed = NULL; 559 struct resource_node *io = NULL; 560 struct resource_node *bus_io[2] = {NULL, NULL}; 561 struct resource_node *mem = NULL; 562 struct resource_node *bus_mem[2] = {NULL, NULL}; 563 struct resource_node *mem_tmp = NULL; 564 struct resource_node *pfmem = NULL; 565 struct resource_node *bus_pfmem[2] = {NULL, NULL}; 566 struct bus_node *bus; 567 static const u32 address[] = { 568 PCI_BASE_ADDRESS_0, 569 PCI_BASE_ADDRESS_1, 570 0 571 }; 572 struct pci_func *func = *func_passed; 573 unsigned int devfn; 574 u8 irq; 575 int retval; 576 577 debug("%s - enter\n", __func__); 578 579 devfn = PCI_DEVFN(func->function, func->device); 580 ibmphp_pci_bus->number = func->busno; 581 582 /* Configuring necessary info for the bridge so that we could see the devices 583 * behind it 584 */ 585 586 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, func->busno); 587 588 /* _____________________For debugging purposes only __________________________ 589 pci_bus_config_byte(ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, &pri_number); 590 debug("primary # written into the bridge is %x\n", pri_number); 591 ___________________________________________________________________________*/ 592 593 /* in EBDA, only get allocated 1 additional bus # per slot */ 594 sec_number = find_sec_number(func->busno, slotno); 595 if (sec_number == 0xff) { 596 err("cannot allocate secondary bus number for the bridged device\n"); 597 return -EINVAL; 598 } 599 600 debug("after find_sec_number, the number we got is %x\n", sec_number); 601 debug("AFTER FIND_SEC_NUMBER, func->busno IS %x\n", func->busno); 602 603 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, sec_number); 604 605 /* __________________For debugging purposes only __________________________________ 606 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); 607 debug("sec_number after write/read is %x\n", sec_number); 608 ________________________________________________________________________________*/ 609 610 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, sec_number); 611 612 /* __________________For debugging purposes only ____________________________________ 613 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, &sec_number); 614 debug("subordinate number after write/read is %x\n", sec_number); 615 __________________________________________________________________________________*/ 616 617 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_CACHE_LINE_SIZE, CACHE); 618 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_LATENCY_TIMER, LATENCY); 619 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_SEC_LATENCY_TIMER, LATENCY); 620 621 debug("func->busno is %x\n", func->busno); 622 debug("sec_number after writing is %x\n", sec_number); 623 624 625 /* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 626 !!!!!!!!!!!!!!!NEED TO ADD!!! FAST BACK-TO-BACK ENABLE!!!!!!!!!!!!!!!!!!!! 627 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*/ 628 629 630 /* First we need to allocate mem/io for the bridge itself in case it needs it */ 631 for (count = 0; address[count]; count++) { /* for 2 BARs */ 632 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); 633 pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &bar[count]); 634 635 if (!bar[count]) { 636 /* This BAR is not implemented */ 637 debug("so we come here then, eh?, count = %d\n", count); 638 continue; 639 } 640 // tmp_bar = bar[count]; 641 642 debug("Bar %d wants %x\n", count, bar[count]); 643 644 if (bar[count] & PCI_BASE_ADDRESS_SPACE_IO) { 645 /* This is IO */ 646 len[count] = bar[count] & 0xFFFFFFFC; 647 len[count] = ~len[count] + 1; 648 649 debug("len[count] in IO = %x\n", len[count]); 650 651 bus_io[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); 652 653 if (!bus_io[count]) { 654 retval = -ENOMEM; 655 goto error; 656 } 657 bus_io[count]->type = IO; 658 bus_io[count]->busno = func->busno; 659 bus_io[count]->devfunc = PCI_DEVFN(func->device, 660 func->function); 661 bus_io[count]->len = len[count]; 662 if (ibmphp_check_resource(bus_io[count], 0) == 0) { 663 ibmphp_add_resource(bus_io[count]); 664 func->io[count] = bus_io[count]; 665 } else { 666 err("cannot allocate requested io for bus %x, device %x, len %x\n", 667 func->busno, func->device, len[count]); 668 kfree(bus_io[count]); 669 return -EIO; 670 } 671 672 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], func->io[count]->start); 673 674 } else { 675 /* This is Memory */ 676 if (bar[count] & PCI_BASE_ADDRESS_MEM_PREFETCH) { 677 /* pfmem */ 678 len[count] = bar[count] & 0xFFFFFFF0; 679 len[count] = ~len[count] + 1; 680 681 debug("len[count] in PFMEM = %x\n", len[count]); 682 683 bus_pfmem[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); 684 if (!bus_pfmem[count]) { 685 retval = -ENOMEM; 686 goto error; 687 } 688 bus_pfmem[count]->type = PFMEM; 689 bus_pfmem[count]->busno = func->busno; 690 bus_pfmem[count]->devfunc = PCI_DEVFN(func->device, 691 func->function); 692 bus_pfmem[count]->len = len[count]; 693 bus_pfmem[count]->fromMem = 0; 694 if (ibmphp_check_resource(bus_pfmem[count], 0) == 0) { 695 ibmphp_add_resource(bus_pfmem[count]); 696 func->pfmem[count] = bus_pfmem[count]; 697 } else { 698 mem_tmp = kzalloc(sizeof(*mem_tmp), GFP_KERNEL); 699 if (!mem_tmp) { 700 retval = -ENOMEM; 701 goto error; 702 } 703 mem_tmp->type = MEM; 704 mem_tmp->busno = bus_pfmem[count]->busno; 705 mem_tmp->devfunc = bus_pfmem[count]->devfunc; 706 mem_tmp->len = bus_pfmem[count]->len; 707 if (ibmphp_check_resource(mem_tmp, 0) == 0) { 708 ibmphp_add_resource(mem_tmp); 709 bus_pfmem[count]->fromMem = 1; 710 bus_pfmem[count]->rangeno = mem_tmp->rangeno; 711 ibmphp_add_pfmem_from_mem(bus_pfmem[count]); 712 func->pfmem[count] = bus_pfmem[count]; 713 } else { 714 err("cannot allocate requested pfmem for bus %x, device %x, len %x\n", 715 func->busno, func->device, len[count]); 716 kfree(mem_tmp); 717 kfree(bus_pfmem[count]); 718 return -EIO; 719 } 720 } 721 722 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], func->pfmem[count]->start); 723 724 if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) { 725 /* takes up another dword */ 726 count += 1; 727 /* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */ 728 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0x00000000); 729 730 } 731 } else { 732 /* regular memory */ 733 len[count] = bar[count] & 0xFFFFFFF0; 734 len[count] = ~len[count] + 1; 735 736 debug("len[count] in Memory is %x\n", len[count]); 737 738 bus_mem[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); 739 if (!bus_mem[count]) { 740 retval = -ENOMEM; 741 goto error; 742 } 743 bus_mem[count]->type = MEM; 744 bus_mem[count]->busno = func->busno; 745 bus_mem[count]->devfunc = PCI_DEVFN(func->device, 746 func->function); 747 bus_mem[count]->len = len[count]; 748 if (ibmphp_check_resource(bus_mem[count], 0) == 0) { 749 ibmphp_add_resource(bus_mem[count]); 750 func->mem[count] = bus_mem[count]; 751 } else { 752 err("cannot allocate requested mem for bus %x, device %x, len %x\n", 753 func->busno, func->device, len[count]); 754 kfree(bus_mem[count]); 755 return -EIO; 756 } 757 758 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], func->mem[count]->start); 759 760 if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) { 761 /* takes up another dword */ 762 count += 1; 763 /* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */ 764 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0x00000000); 765 766 } 767 } 768 } /* end of mem */ 769 } /* end of for */ 770 771 /* Now need to see how much space the devices behind the bridge needed */ 772 amount_needed = scan_behind_bridge(func, sec_number); 773 if (amount_needed == NULL) 774 return -ENOMEM; 775 776 ibmphp_pci_bus->number = func->busno; 777 debug("after coming back from scan_behind_bridge\n"); 778 debug("amount_needed->not_correct = %x\n", amount_needed->not_correct); 779 debug("amount_needed->io = %x\n", amount_needed->io); 780 debug("amount_needed->mem = %x\n", amount_needed->mem); 781 debug("amount_needed->pfmem = %x\n", amount_needed->pfmem); 782 783 if (amount_needed->not_correct) { 784 debug("amount_needed is not correct\n"); 785 for (count = 0; address[count]; count++) { 786 /* for 2 BARs */ 787 if (bus_io[count]) { 788 ibmphp_remove_resource(bus_io[count]); 789 func->io[count] = NULL; 790 } else if (bus_pfmem[count]) { 791 ibmphp_remove_resource(bus_pfmem[count]); 792 func->pfmem[count] = NULL; 793 } else if (bus_mem[count]) { 794 ibmphp_remove_resource(bus_mem[count]); 795 func->mem[count] = NULL; 796 } 797 } 798 kfree(amount_needed); 799 return -ENODEV; 800 } 801 802 if (!amount_needed->io) { 803 debug("it doesn't want IO?\n"); 804 flag_io = 1; 805 } else { 806 debug("it wants %x IO behind the bridge\n", amount_needed->io); 807 io = kzalloc(sizeof(*io), GFP_KERNEL); 808 809 if (!io) { 810 retval = -ENOMEM; 811 goto error; 812 } 813 io->type = IO; 814 io->busno = func->busno; 815 io->devfunc = PCI_DEVFN(func->device, func->function); 816 io->len = amount_needed->io; 817 if (ibmphp_check_resource(io, 1) == 0) { 818 debug("were we able to add io\n"); 819 ibmphp_add_resource(io); 820 flag_io = 1; 821 } 822 } 823 824 if (!amount_needed->mem) { 825 debug("it doesn't want n.e.memory?\n"); 826 flag_mem = 1; 827 } else { 828 debug("it wants %x memory behind the bridge\n", amount_needed->mem); 829 mem = kzalloc(sizeof(*mem), GFP_KERNEL); 830 if (!mem) { 831 retval = -ENOMEM; 832 goto error; 833 } 834 mem->type = MEM; 835 mem->busno = func->busno; 836 mem->devfunc = PCI_DEVFN(func->device, func->function); 837 mem->len = amount_needed->mem; 838 if (ibmphp_check_resource(mem, 1) == 0) { 839 ibmphp_add_resource(mem); 840 flag_mem = 1; 841 debug("were we able to add mem\n"); 842 } 843 } 844 845 if (!amount_needed->pfmem) { 846 debug("it doesn't want n.e.pfmem mem?\n"); 847 flag_pfmem = 1; 848 } else { 849 debug("it wants %x pfmemory behind the bridge\n", amount_needed->pfmem); 850 pfmem = kzalloc(sizeof(*pfmem), GFP_KERNEL); 851 if (!pfmem) { 852 retval = -ENOMEM; 853 goto error; 854 } 855 pfmem->type = PFMEM; 856 pfmem->busno = func->busno; 857 pfmem->devfunc = PCI_DEVFN(func->device, func->function); 858 pfmem->len = amount_needed->pfmem; 859 pfmem->fromMem = 0; 860 if (ibmphp_check_resource(pfmem, 1) == 0) { 861 ibmphp_add_resource(pfmem); 862 flag_pfmem = 1; 863 } else { 864 mem_tmp = kzalloc(sizeof(*mem_tmp), GFP_KERNEL); 865 if (!mem_tmp) { 866 retval = -ENOMEM; 867 goto error; 868 } 869 mem_tmp->type = MEM; 870 mem_tmp->busno = pfmem->busno; 871 mem_tmp->devfunc = pfmem->devfunc; 872 mem_tmp->len = pfmem->len; 873 if (ibmphp_check_resource(mem_tmp, 1) == 0) { 874 ibmphp_add_resource(mem_tmp); 875 pfmem->fromMem = 1; 876 pfmem->rangeno = mem_tmp->rangeno; 877 ibmphp_add_pfmem_from_mem(pfmem); 878 flag_pfmem = 1; 879 } 880 } 881 } 882 883 debug("b4 if (flag_io && flag_mem && flag_pfmem)\n"); 884 debug("flag_io = %x, flag_mem = %x, flag_pfmem = %x\n", flag_io, flag_mem, flag_pfmem); 885 886 if (flag_io && flag_mem && flag_pfmem) { 887 /* If on bootup, there was a bridged card in this slot, 888 * then card was removed and ibmphp got unloaded and loaded 889 * back again, there's no way for us to remove the bus 890 * struct, so no need to kmalloc, can use existing node 891 */ 892 bus = ibmphp_find_res_bus(sec_number); 893 if (!bus) { 894 bus = kzalloc(sizeof(*bus), GFP_KERNEL); 895 if (!bus) { 896 retval = -ENOMEM; 897 goto error; 898 } 899 bus->busno = sec_number; 900 debug("b4 adding new bus\n"); 901 rc = add_new_bus(bus, io, mem, pfmem, func->busno); 902 } else if (!(bus->rangeIO) && !(bus->rangeMem) && !(bus->rangePFMem)) 903 rc = add_new_bus(bus, io, mem, pfmem, 0xFF); 904 else { 905 err("expected bus structure not empty?\n"); 906 retval = -EIO; 907 goto error; 908 } 909 if (rc) { 910 if (rc == -ENOMEM) { 911 ibmphp_remove_bus(bus, func->busno); 912 kfree(amount_needed); 913 return rc; 914 } 915 retval = rc; 916 goto error; 917 } 918 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_IO_BASE, &io_base); 919 pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, &pfmem_base); 920 921 if ((io_base & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) { 922 debug("io 32\n"); 923 need_io_upper = 1; 924 } 925 if ((pfmem_base & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) { 926 debug("pfmem 64\n"); 927 need_pfmem_upper = 1; 928 } 929 930 if (bus->noIORanges) { 931 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_IO_BASE, 0x00 | bus->rangeIO->start >> 8); 932 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00 | bus->rangeIO->end >> 8); 933 934 /* _______________This is for debugging purposes only ____________________ 935 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_IO_BASE, &temp); 936 debug("io_base = %x\n", (temp & PCI_IO_RANGE_TYPE_MASK) << 8); 937 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_IO_LIMIT, &temp); 938 debug("io_limit = %x\n", (temp & PCI_IO_RANGE_TYPE_MASK) << 8); 939 ________________________________________________________________________*/ 940 941 if (need_io_upper) { /* since can't support n.e.ways */ 942 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_IO_BASE_UPPER16, 0x0000); 943 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_IO_LIMIT_UPPER16, 0x0000); 944 } 945 } else { 946 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_IO_BASE, 0x00); 947 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00); 948 } 949 950 if (bus->noMemRanges) { 951 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, 0x0000 | bus->rangeMem->start >> 16); 952 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, 0x0000 | bus->rangeMem->end >> 16); 953 954 /* ____________________This is for debugging purposes only ________________________ 955 pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, &temp); 956 debug("mem_base = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); 957 pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, &temp); 958 debug("mem_limit = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); 959 __________________________________________________________________________________*/ 960 961 } else { 962 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, 0xffff); 963 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, 0x0000); 964 } 965 if (bus->noPFMemRanges) { 966 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, 0x0000 | bus->rangePFMem->start >> 16); 967 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, 0x0000 | bus->rangePFMem->end >> 16); 968 969 /* __________________________This is for debugging purposes only _______________________ 970 pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, &temp); 971 debug("pfmem_base = %x", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); 972 pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &temp); 973 debug("pfmem_limit = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); 974 ______________________________________________________________________________________*/ 975 976 if (need_pfmem_upper) { /* since can't support n.e.ways */ 977 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, PCI_PREF_BASE_UPPER32, 0x00000000); 978 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, PCI_PREF_LIMIT_UPPER32, 0x00000000); 979 } 980 } else { 981 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, 0xffff); 982 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, 0x0000); 983 } 984 985 debug("b4 writing control information\n"); 986 987 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_INTERRUPT_PIN, &irq); 988 if ((irq > 0x00) && (irq < 0x05)) 989 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_INTERRUPT_LINE, func->irq[irq - 1]); 990 /* 991 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, ctrl); 992 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_PARITY); 993 pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_SERR); 994 */ 995 996 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_COMMAND, DEVICEENABLE); 997 pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, 0x07); 998 for (i = 0; i < 32; i++) { 999 if (amount_needed->devices[i]) { 1000 debug("device where devices[i] is 1 = %x\n", i); 1001 func->devices[i] = 1; 1002 } 1003 } 1004 func->bus = 1; /* For unconfiguring, to indicate it's PPB */ 1005 func_passed = &func; 1006 debug("func->busno b4 returning is %x\n", func->busno); 1007 debug("func->busno b4 returning in the other structure is %x\n", (*func_passed)->busno); 1008 kfree(amount_needed); 1009 return 0; 1010 } else { 1011 err("Configuring bridge was unsuccessful...\n"); 1012 mem_tmp = NULL; 1013 retval = -EIO; 1014 goto error; 1015 } 1016 1017error: 1018 kfree(amount_needed); 1019 if (pfmem) 1020 ibmphp_remove_resource(pfmem); 1021 if (io) 1022 ibmphp_remove_resource(io); 1023 if (mem) 1024 ibmphp_remove_resource(mem); 1025 for (i = 0; i < 2; i++) { /* for 2 BARs */ 1026 if (bus_io[i]) { 1027 ibmphp_remove_resource(bus_io[i]); 1028 func->io[i] = NULL; 1029 } else if (bus_pfmem[i]) { 1030 ibmphp_remove_resource(bus_pfmem[i]); 1031 func->pfmem[i] = NULL; 1032 } else if (bus_mem[i]) { 1033 ibmphp_remove_resource(bus_mem[i]); 1034 func->mem[i] = NULL; 1035 } 1036 } 1037 return retval; 1038} 1039 1040/***************************************************************************** 1041 * This function adds up the amount of resources needed behind the PPB bridge 1042 * and passes it to the configure_bridge function 1043 * Input: bridge function 1044 * Output: amount of resources needed 1045 *****************************************************************************/ 1046static struct res_needed *scan_behind_bridge(struct pci_func *func, u8 busno) 1047{ 1048 int count, len[6]; 1049 u16 vendor_id; 1050 u8 hdr_type; 1051 u8 device, function; 1052 unsigned int devfn; 1053 int howmany = 0; /*this is to see if there are any devices behind the bridge */ 1054 1055 u32 bar[6], class; 1056 static const u32 address[] = { 1057 PCI_BASE_ADDRESS_0, 1058 PCI_BASE_ADDRESS_1, 1059 PCI_BASE_ADDRESS_2, 1060 PCI_BASE_ADDRESS_3, 1061 PCI_BASE_ADDRESS_4, 1062 PCI_BASE_ADDRESS_5, 1063 0 1064 }; 1065 struct res_needed *amount; 1066 1067 amount = kzalloc(sizeof(*amount), GFP_KERNEL); 1068 if (amount == NULL) 1069 return NULL; 1070 1071 ibmphp_pci_bus->number = busno; 1072 1073 debug("the bus_no behind the bridge is %x\n", busno); 1074 debug("scanning devices behind the bridge...\n"); 1075 for (device = 0; device < 32; device++) { 1076 amount->devices[device] = 0; 1077 for (function = 0; function < 8; function++) { 1078 devfn = PCI_DEVFN(device, function); 1079 1080 pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id); 1081 1082 if (vendor_id != PCI_VENDOR_ID_NOTVALID) { 1083 /* found correct device!!! */ 1084 howmany++; 1085 1086 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type); 1087 pci_bus_read_config_dword(ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class); 1088 1089 debug("hdr_type behind the bridge is %x\n", hdr_type); 1090 if ((hdr_type & PCI_HEADER_TYPE_MASK) == PCI_HEADER_TYPE_BRIDGE) { 1091 err("embedded bridges not supported for hot-plugging.\n"); 1092 amount->not_correct = 1; 1093 return amount; 1094 } 1095 1096 class >>= 8; /* to take revision out, class = class.subclass.prog i/f */ 1097 if (class == PCI_CLASS_NOT_DEFINED_VGA) { 1098 err("The device %x is VGA compatible and as is not supported for hot plugging. Please choose another device.\n", device); 1099 amount->not_correct = 1; 1100 return amount; 1101 } else if (class == PCI_CLASS_DISPLAY_VGA) { 1102 err("The device %x is not supported for hot plugging. Please choose another device.\n", device); 1103 amount->not_correct = 1; 1104 return amount; 1105 } 1106 1107 amount->devices[device] = 1; 1108 1109 for (count = 0; address[count]; count++) { 1110 /* for 6 BARs */ 1111 /* 1112 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, address[count], &tmp); 1113 if (tmp & 0x01) // IO 1114 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFD); 1115 else // MEMORY 1116 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); 1117 */ 1118 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); 1119 pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &bar[count]); 1120 1121 debug("what is bar[count]? %x, count = %d\n", bar[count], count); 1122 1123 if (!bar[count]) /* This BAR is not implemented */ 1124 continue; 1125 1126 //tmp_bar = bar[count]; 1127 1128 debug("count %d device %x function %x wants %x resources\n", count, device, function, bar[count]); 1129 1130 if (bar[count] & PCI_BASE_ADDRESS_SPACE_IO) { 1131 /* This is IO */ 1132 len[count] = bar[count] & 0xFFFFFFFC; 1133 len[count] = ~len[count] + 1; 1134 amount->io += len[count]; 1135 } else { 1136 /* This is Memory */ 1137 if (bar[count] & PCI_BASE_ADDRESS_MEM_PREFETCH) { 1138 /* pfmem */ 1139 len[count] = bar[count] & 0xFFFFFFF0; 1140 len[count] = ~len[count] + 1; 1141 amount->pfmem += len[count]; 1142 if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) 1143 /* takes up another dword */ 1144 count += 1; 1145 1146 } else { 1147 /* regular memory */ 1148 len[count] = bar[count] & 0xFFFFFFF0; 1149 len[count] = ~len[count] + 1; 1150 amount->mem += len[count]; 1151 if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) { 1152 /* takes up another dword */ 1153 count += 1; 1154 } 1155 } 1156 } 1157 } /* end for */ 1158 } /* end if (valid) */ 1159 } /* end for */ 1160 } /* end for */ 1161 1162 if (!howmany) 1163 amount->not_correct = 1; 1164 else 1165 amount->not_correct = 0; 1166 if ((amount->io) && (amount->io < IOBRIDGE)) 1167 amount->io = IOBRIDGE; 1168 if ((amount->mem) && (amount->mem < MEMBRIDGE)) 1169 amount->mem = MEMBRIDGE; 1170 if ((amount->pfmem) && (amount->pfmem < MEMBRIDGE)) 1171 amount->pfmem = MEMBRIDGE; 1172 return amount; 1173} 1174 1175/* The following 3 unconfigure_boot_ routines deal with the case when we had the card 1176 * upon bootup in the system, since we don't allocate func to such case, we need to read 1177 * the start addresses from pci config space and then find the corresponding entries in 1178 * our resource lists. The functions return either 0, -ENODEV, or -1 (general failure) 1179 * Change: we also call these functions even if we configured the card ourselves (i.e., not 1180 * the bootup case), since it should work same way 1181 */ 1182static int unconfigure_boot_device(u8 busno, u8 device, u8 function) 1183{ 1184 u32 start_address; 1185 static const u32 address[] = { 1186 PCI_BASE_ADDRESS_0, 1187 PCI_BASE_ADDRESS_1, 1188 PCI_BASE_ADDRESS_2, 1189 PCI_BASE_ADDRESS_3, 1190 PCI_BASE_ADDRESS_4, 1191 PCI_BASE_ADDRESS_5, 1192 0 1193 }; 1194 int count; 1195 struct resource_node *io; 1196 struct resource_node *mem; 1197 struct resource_node *pfmem; 1198 struct bus_node *bus; 1199 u32 end_address; 1200 u32 temp_end; 1201 u32 size; 1202 u32 tmp_address; 1203 unsigned int devfn; 1204 1205 debug("%s - enter\n", __func__); 1206 1207 bus = ibmphp_find_res_bus(busno); 1208 if (!bus) { 1209 debug("cannot find corresponding bus.\n"); 1210 return -EINVAL; 1211 } 1212 1213 devfn = PCI_DEVFN(device, function); 1214 ibmphp_pci_bus->number = busno; 1215 for (count = 0; address[count]; count++) { /* for 6 BARs */ 1216 pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &start_address); 1217 1218 /* We can do this here, b/c by that time the device driver of the card has been stopped */ 1219 1220 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); 1221 pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &size); 1222 pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], start_address); 1223 1224 debug("start_address is %x\n", start_address); 1225 debug("busno, device, function %x %x %x\n", busno, device, function); 1226 if (!size) { 1227 /* This BAR is not implemented */ 1228 debug("is this bar no implemented?, count = %d\n", count); 1229 continue; 1230 } 1231 tmp_address = start_address; 1232 if (start_address & PCI_BASE_ADDRESS_SPACE_IO) { 1233 /* This is IO */ 1234 start_address &= PCI_BASE_ADDRESS_IO_MASK; 1235 size = size & 0xFFFFFFFC; 1236 size = ~size + 1; 1237 end_address = start_address + size - 1; 1238 if (ibmphp_find_resource(bus, start_address, &io, IO)) 1239 goto report_search_failure; 1240 1241 debug("io->start = %x\n", io->start); 1242 temp_end = io->end; 1243 start_address = io->end + 1; 1244 ibmphp_remove_resource(io); 1245 /* This is needed b/c of the old I/O restrictions in the BIOS */ 1246 while (temp_end < end_address) { 1247 if (ibmphp_find_resource(bus, start_address, 1248 &io, IO)) 1249 goto report_search_failure; 1250 1251 debug("io->start = %x\n", io->start); 1252 temp_end = io->end; 1253 start_address = io->end + 1; 1254 ibmphp_remove_resource(io); 1255 } 1256 1257 /* ????????? DO WE NEED TO WRITE ANYTHING INTO THE PCI CONFIG SPACE BACK ?????????? */ 1258 } else { 1259 /* This is Memory */ 1260 if (start_address & PCI_BASE_ADDRESS_MEM_PREFETCH) { 1261 /* pfmem */ 1262 debug("start address of pfmem is %x\n", start_address); 1263 start_address &= PCI_BASE_ADDRESS_MEM_MASK; 1264 1265 if (ibmphp_find_resource(bus, start_address, &pfmem, PFMEM) < 0) { 1266 err("cannot find corresponding PFMEM resource to remove\n"); 1267 return -EIO; 1268 } 1269 if (pfmem) { 1270 debug("pfmem->start = %x\n", pfmem->start); 1271 1272 ibmphp_remove_resource(pfmem); 1273 } 1274 } else { 1275 /* regular memory */ 1276 debug("start address of mem is %x\n", start_address); 1277 start_address &= PCI_BASE_ADDRESS_MEM_MASK; 1278 1279 if (ibmphp_find_resource(bus, start_address, &mem, MEM) < 0) { 1280 err("cannot find corresponding MEM resource to remove\n"); 1281 return -EIO; 1282 } 1283 if (mem) { 1284 debug("mem->start = %x\n", mem->start); 1285 1286 ibmphp_remove_resource(mem); 1287 } 1288 } 1289 if (tmp_address & PCI_BASE_ADDRESS_MEM_TYPE_64) { 1290 /* takes up another dword */ 1291 count += 1; 1292 } 1293 } /* end of mem */ 1294 } /* end of for */ 1295 1296 return 0; 1297 1298report_search_failure: 1299 err("cannot find corresponding IO resource to remove\n"); 1300 return -EIO; 1301} 1302 1303static int unconfigure_boot_bridge(u8 busno, u8 device, u8 function) 1304{ 1305 int count; 1306 int bus_no, pri_no, sub_no, sec_no = 0; 1307 u32 start_address, tmp_address; 1308 u8 sec_number, sub_number, pri_number; 1309 struct resource_node *io = NULL; 1310 struct resource_node *mem = NULL; 1311 struct resource_node *pfmem = NULL; 1312 struct bus_node *bus; 1313 static const u32 address[] = { 1314 PCI_BASE_ADDRESS_0, 1315 PCI_BASE_ADDRESS_1, 1316 0 1317 }; 1318 unsigned int devfn; 1319 1320 devfn = PCI_DEVFN(device, function); 1321 ibmphp_pci_bus->number = busno; 1322 bus_no = (int) busno; 1323 debug("busno is %x\n", busno); 1324 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, &pri_number); 1325 debug("%s - busno = %x, primary_number = %x\n", __func__, busno, pri_number); 1326 1327 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); 1328 debug("sec_number is %x\n", sec_number); 1329 sec_no = (int) sec_number; 1330 pri_no = (int) pri_number; 1331 if (pri_no != bus_no) { 1332 err("primary numbers in our structures and pci config space don't match.\n"); 1333 return -EINVAL; 1334 } 1335 1336 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, &sub_number); 1337 sub_no = (int) sub_number; 1338 debug("sub_no is %d, sec_no is %d\n", sub_no, sec_no); 1339 if (sec_no != sub_number) { 1340 err("there're more buses behind this bridge. Hot removal is not supported. Please choose another card\n"); 1341 return -ENODEV; 1342 } 1343 1344 bus = ibmphp_find_res_bus(sec_number); 1345 if (!bus) { 1346 err("cannot find Bus structure for the bridged device\n"); 1347 return -EINVAL; 1348 } 1349 debug("bus->busno is %x\n", bus->busno); 1350 debug("sec_number is %x\n", sec_number); 1351 1352 ibmphp_remove_bus(bus, busno); 1353 1354 for (count = 0; address[count]; count++) { 1355 /* for 2 BARs */ 1356 pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &start_address); 1357 1358 if (!start_address) { 1359 /* This BAR is not implemented */ 1360 continue; 1361 } 1362 1363 tmp_address = start_address; 1364 1365 if (start_address & PCI_BASE_ADDRESS_SPACE_IO) { 1366 /* This is IO */ 1367 start_address &= PCI_BASE_ADDRESS_IO_MASK; 1368 if (ibmphp_find_resource(bus, start_address, &io, IO) < 0) { 1369 err("cannot find corresponding IO resource to remove\n"); 1370 return -EIO; 1371 } 1372 if (io) 1373 debug("io->start = %x\n", io->start); 1374 1375 ibmphp_remove_resource(io); 1376 1377 /* ????????? DO WE NEED TO WRITE ANYTHING INTO THE PCI CONFIG SPACE BACK ?????????? */ 1378 } else { 1379 /* This is Memory */ 1380 if (start_address & PCI_BASE_ADDRESS_MEM_PREFETCH) { 1381 /* pfmem */ 1382 start_address &= PCI_BASE_ADDRESS_MEM_MASK; 1383 if (ibmphp_find_resource(bus, start_address, &pfmem, PFMEM) < 0) { 1384 err("cannot find corresponding PFMEM resource to remove\n"); 1385 return -EINVAL; 1386 } 1387 if (pfmem) { 1388 debug("pfmem->start = %x\n", pfmem->start); 1389 1390 ibmphp_remove_resource(pfmem); 1391 } 1392 } else { 1393 /* regular memory */ 1394 start_address &= PCI_BASE_ADDRESS_MEM_MASK; 1395 if (ibmphp_find_resource(bus, start_address, &mem, MEM) < 0) { 1396 err("cannot find corresponding MEM resource to remove\n"); 1397 return -EINVAL; 1398 } 1399 if (mem) { 1400 debug("mem->start = %x\n", mem->start); 1401 1402 ibmphp_remove_resource(mem); 1403 } 1404 } 1405 if (tmp_address & PCI_BASE_ADDRESS_MEM_TYPE_64) { 1406 /* takes up another dword */ 1407 count += 1; 1408 } 1409 } /* end of mem */ 1410 } /* end of for */ 1411 debug("%s - exiting, returning success\n", __func__); 1412 return 0; 1413} 1414 1415static int unconfigure_boot_card(struct slot *slot_cur) 1416{ 1417 u16 vendor_id; 1418 u32 class; 1419 u8 hdr_type; 1420 u8 device; 1421 u8 busno; 1422 u8 function; 1423 int rc; 1424 unsigned int devfn; 1425 u8 valid_device = 0x00; /* To see if we are ever able to find valid device and read it */ 1426 1427 debug("%s - enter\n", __func__); 1428 1429 device = slot_cur->device; 1430 busno = slot_cur->bus; 1431 1432 debug("b4 for loop, device is %x\n", device); 1433 /* For every function on the card */ 1434 for (function = 0x0; function < 0x08; function++) { 1435 devfn = PCI_DEVFN(device, function); 1436 ibmphp_pci_bus->number = busno; 1437 1438 pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id); 1439 1440 if (vendor_id != PCI_VENDOR_ID_NOTVALID) { 1441 /* found correct device!!! */ 1442 ++valid_device; 1443 1444 debug("%s - found correct device\n", __func__); 1445 1446 /* header: x x x x x x x x 1447 * | |___________|=> 1=PPB bridge, 0=normal device, 2=CardBus Bridge 1448 * |_=> 0 = single function device, 1 = multi-function device 1449 */ 1450 1451 pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type); 1452 pci_bus_read_config_dword(ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class); 1453 1454 debug("hdr_type %x, class %x\n", hdr_type, class); 1455 class >>= 8; /* to take revision out, class = class.subclass.prog i/f */ 1456 if (class == PCI_CLASS_NOT_DEFINED_VGA) { 1457 err("The device %x function %x is VGA compatible and is not supported for hot removing. Please choose another device.\n", device, function); 1458 return -ENODEV; 1459 } else if (class == PCI_CLASS_DISPLAY_VGA) { 1460 err("The device %x function %x is not supported for hot removing. Please choose another device.\n", device, function); 1461 return -ENODEV; 1462 } 1463 1464 switch (hdr_type) { 1465 case PCI_HEADER_TYPE_NORMAL: 1466 rc = unconfigure_boot_device(busno, device, function); 1467 if (rc) { 1468 err("was not able to unconfigure device %x func %x on bus %x. bailing out...\n", 1469 device, function, busno); 1470 return rc; 1471 } 1472 function = 0x8; 1473 break; 1474 case PCI_HEADER_TYPE_MULTIDEVICE: 1475 rc = unconfigure_boot_device(busno, device, function); 1476 if (rc) { 1477 err("was not able to unconfigure device %x func %x on bus %x. bailing out...\n", 1478 device, function, busno); 1479 return rc; 1480 } 1481 break; 1482 case PCI_HEADER_TYPE_BRIDGE: 1483 class >>= 8; 1484 if (class != PCI_CLASS_BRIDGE_PCI) { 1485 err("This device %x function %x is not PCI-to-PCI bridge, and is not supported for hot-removing. Please try another card.\n", device, function); 1486 return -ENODEV; 1487 } 1488 rc = unconfigure_boot_bridge(busno, device, function); 1489 if (rc != 0) { 1490 err("was not able to hot-remove PPB properly.\n"); 1491 return rc; 1492 } 1493 1494 function = 0x8; 1495 break; 1496 case PCI_HEADER_TYPE_MULTIBRIDGE: 1497 class >>= 8; 1498 if (class != PCI_CLASS_BRIDGE_PCI) { 1499 err("This device %x function %x is not PCI-to-PCI bridge, and is not supported for hot-removing. Please try another card.\n", device, function); 1500 return -ENODEV; 1501 } 1502 rc = unconfigure_boot_bridge(busno, device, function); 1503 if (rc != 0) { 1504 err("was not able to hot-remove PPB properly.\n"); 1505 return rc; 1506 } 1507 break; 1508 default: 1509 err("MAJOR PROBLEM!!!! Cannot read device's header\n"); 1510 return -1; 1511 } /* end of switch */ 1512 } /* end of valid device */ 1513 } /* end of for */ 1514 1515 if (!valid_device) { 1516 err("Could not find device to unconfigure. Or could not read the card.\n"); 1517 return -1; 1518 } 1519 return 0; 1520} 1521 1522/* 1523 * free the resources of the card (multi, single, or bridged) 1524 * Parameters: slot, flag to say if this is for removing entire module or just 1525 * unconfiguring the device 1526 * TO DO: will probably need to add some code in case there was some resource, 1527 * to remove it... this is from when we have errors in the configure_card... 1528 * !!!!!!!!!!!!!!!!!!!!!!!!!FOR BUSES!!!!!!!!!!!! 1529 * Returns: 0, -1, -ENODEV 1530 */ 1531int ibmphp_unconfigure_card(struct slot **slot_cur, int the_end) 1532{ 1533 int i; 1534 int count; 1535 int rc; 1536 struct slot *sl = *slot_cur; 1537 struct pci_func *cur_func = NULL; 1538 struct pci_func *temp_func; 1539 1540 debug("%s - enter\n", __func__); 1541 1542 if (!the_end) { 1543 /* Need to unconfigure the card */ 1544 rc = unconfigure_boot_card(sl); 1545 if ((rc == -ENODEV) || (rc == -EIO) || (rc == -EINVAL)) { 1546 /* In all other cases, will still need to get rid of func structure if it exists */ 1547 return rc; 1548 } 1549 } 1550 1551 if (sl->func) { 1552 cur_func = sl->func; 1553 while (cur_func) { 1554 /* TO DO: WILL MOST LIKELY NEED TO GET RID OF THE BUS STRUCTURE FROM RESOURCES AS WELL */ 1555 if (cur_func->bus) { 1556 /* in other words, it's a PPB */ 1557 count = 2; 1558 } else { 1559 count = 6; 1560 } 1561 1562 for (i = 0; i < count; i++) { 1563 if (cur_func->io[i]) { 1564 debug("io[%d] exists\n", i); 1565 if (the_end > 0) 1566 ibmphp_remove_resource(cur_func->io[i]); 1567 cur_func->io[i] = NULL; 1568 } 1569 if (cur_func->mem[i]) { 1570 debug("mem[%d] exists\n", i); 1571 if (the_end > 0) 1572 ibmphp_remove_resource(cur_func->mem[i]); 1573 cur_func->mem[i] = NULL; 1574 } 1575 if (cur_func->pfmem[i]) { 1576 debug("pfmem[%d] exists\n", i); 1577 if (the_end > 0) 1578 ibmphp_remove_resource(cur_func->pfmem[i]); 1579 cur_func->pfmem[i] = NULL; 1580 } 1581 } 1582 1583 temp_func = cur_func->next; 1584 kfree(cur_func); 1585 cur_func = temp_func; 1586 } 1587 } 1588 1589 sl->func = NULL; 1590 *slot_cur = sl; 1591 debug("%s - exit\n", __func__); 1592 return 0; 1593} 1594 1595/* 1596 * add a new bus resulting from hot-plugging a PPB bridge with devices 1597 * 1598 * Input: bus and the amount of resources needed (we know we can assign those, 1599 * since they've been checked already 1600 * Output: bus added to the correct spot 1601 * 0, -1, error 1602 */ 1603static int add_new_bus(struct bus_node *bus, struct resource_node *io, struct resource_node *mem, struct resource_node *pfmem, u8 parent_busno) 1604{ 1605 struct range_node *io_range = NULL; 1606 struct range_node *mem_range = NULL; 1607 struct range_node *pfmem_range = NULL; 1608 struct bus_node *cur_bus = NULL; 1609 1610 /* Trying to find the parent bus number */ 1611 if (parent_busno != 0xFF) { 1612 cur_bus = ibmphp_find_res_bus(parent_busno); 1613 if (!cur_bus) { 1614 err("strange, cannot find bus which is supposed to be at the system... something is terribly wrong...\n"); 1615 return -ENODEV; 1616 } 1617 1618 list_add(&bus->bus_list, &cur_bus->bus_list); 1619 } 1620 if (io) { 1621 io_range = kzalloc(sizeof(*io_range), GFP_KERNEL); 1622 if (!io_range) 1623 return -ENOMEM; 1624 1625 io_range->start = io->start; 1626 io_range->end = io->end; 1627 io_range->rangeno = 1; 1628 bus->noIORanges = 1; 1629 bus->rangeIO = io_range; 1630 } 1631 if (mem) { 1632 mem_range = kzalloc(sizeof(*mem_range), GFP_KERNEL); 1633 if (!mem_range) 1634 return -ENOMEM; 1635 1636 mem_range->start = mem->start; 1637 mem_range->end = mem->end; 1638 mem_range->rangeno = 1; 1639 bus->noMemRanges = 1; 1640 bus->rangeMem = mem_range; 1641 } 1642 if (pfmem) { 1643 pfmem_range = kzalloc(sizeof(*pfmem_range), GFP_KERNEL); 1644 if (!pfmem_range) 1645 return -ENOMEM; 1646 1647 pfmem_range->start = pfmem->start; 1648 pfmem_range->end = pfmem->end; 1649 pfmem_range->rangeno = 1; 1650 bus->noPFMemRanges = 1; 1651 bus->rangePFMem = pfmem_range; 1652 } 1653 return 0; 1654} 1655 1656/* 1657 * find the 1st available bus number for PPB to set as its secondary bus 1658 * Parameters: bus_number of the primary bus 1659 * Returns: bus_number of the secondary bus or 0xff in case of failure 1660 */ 1661static u8 find_sec_number(u8 primary_busno, u8 slotno) 1662{ 1663 int min, max; 1664 u8 busno; 1665 struct bus_info *bus; 1666 struct bus_node *bus_cur; 1667 1668 bus = ibmphp_find_same_bus_num(primary_busno); 1669 if (!bus) { 1670 err("cannot get slot range of the bus from the BIOS\n"); 1671 return 0xff; 1672 } 1673 max = bus->slot_max; 1674 min = bus->slot_min; 1675 if ((slotno > max) || (slotno < min)) { 1676 err("got the wrong range\n"); 1677 return 0xff; 1678 } 1679 busno = (u8) (slotno - (u8) min); 1680 busno += primary_busno + 0x01; 1681 bus_cur = ibmphp_find_res_bus(busno); 1682 /* either there is no such bus number, or there are no ranges, which 1683 * can only happen if we removed the bridged device in previous load 1684 * of the driver, and now only have the skeleton bus struct 1685 */ 1686 if ((!bus_cur) || (!(bus_cur->rangeIO) && !(bus_cur->rangeMem) && !(bus_cur->rangePFMem))) 1687 return busno; 1688 return 0xff; 1689} 1690