1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries. 4 * All rights reserved. 5 */ 6 7#ifndef WILC_WLAN_IF_H 8#define WILC_WLAN_IF_H 9 10#include <linux/netdevice.h> 11#include "fw.h" 12 13#define WILC_MAX_ASSOC_RESP_FRAME_SIZE 512 14 15/******************************************** 16 * 17 * Wlan Configuration ID 18 * 19 ********************************************/ 20 21enum bss_types { 22 WILC_FW_BSS_TYPE_INFRA = 0, 23 WILC_FW_BSS_TYPE_INDEPENDENT, 24 WILC_FW_BSS_TYPE_AP, 25}; 26 27enum { 28 WILC_FW_OPER_MODE_B_ONLY = 0, /* 1, 2 M, otherwise 5, 11 M */ 29 WILC_FW_OPER_MODE_G_ONLY, /* 6,12,24 otherwise 9,18,36,48,54 */ 30 WILC_FW_OPER_MODE_G_MIXED_11B_1, /* 1,2,5.5,11 otherwise all on */ 31 WILC_FW_OPER_MODE_G_MIXED_11B_2, /* 1,2,5,11,6,12,24 otherwise all on */ 32}; 33 34enum { 35 WILC_FW_PREAMBLE_SHORT = 0, /* Short Preamble */ 36 WILC_FW_PREAMBLE_LONG = 1, /* Long Preamble */ 37 WILC_FW_PREAMBLE_AUTO = 2, /* Auto Preamble Selection */ 38}; 39 40enum { 41 WILC_FW_PASSIVE_SCAN = 0, 42 WILC_FW_ACTIVE_SCAN = 1, 43}; 44 45enum { 46 WILC_FW_NO_POWERSAVE = 0, 47 WILC_FW_MIN_FAST_PS = 1, 48 WILC_FW_MAX_FAST_PS = 2, 49 WILC_FW_MIN_PSPOLL_PS = 3, 50 WILC_FW_MAX_PSPOLL_PS = 4 51}; 52 53enum bus_acquire { 54 WILC_BUS_ACQUIRE_ONLY = 0, 55 WILC_BUS_ACQUIRE_AND_WAKEUP = 1, 56}; 57 58enum bus_release { 59 WILC_BUS_RELEASE_ONLY = 0, 60 WILC_BUS_RELEASE_ALLOW_SLEEP = 1, 61}; 62 63enum { 64 WILC_FW_NO_ENCRYPT = 0, 65 WILC_FW_ENCRYPT_ENABLED = BIT(0), 66 WILC_FW_WEP = BIT(1), 67 WILC_FW_WEP_EXTENDED = BIT(2), 68 WILC_FW_WPA = BIT(3), 69 WILC_FW_WPA2 = BIT(4), 70 WILC_FW_AES = BIT(5), 71 WILC_FW_TKIP = BIT(6) 72}; 73 74enum { 75 WILC_FW_SEC_NO = WILC_FW_NO_ENCRYPT, 76 WILC_FW_SEC_WEP = WILC_FW_WEP | WILC_FW_ENCRYPT_ENABLED, 77 WILC_FW_SEC_WEP_EXTENDED = WILC_FW_WEP_EXTENDED | WILC_FW_SEC_WEP, 78 WILC_FW_SEC_WPA = WILC_FW_WPA | WILC_FW_ENCRYPT_ENABLED, 79 WILC_FW_SEC_WPA_AES = WILC_FW_AES | WILC_FW_SEC_WPA, 80 WILC_FW_SEC_WPA_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA, 81 WILC_FW_SEC_WPA2 = WILC_FW_WPA2 | WILC_FW_ENCRYPT_ENABLED, 82 WILC_FW_SEC_WPA2_AES = WILC_FW_AES | WILC_FW_SEC_WPA2, 83 WILC_FW_SEC_WPA2_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA2 84}; 85 86enum authtype { 87 WILC_FW_AUTH_OPEN_SYSTEM = 1, 88 WILC_FW_AUTH_SHARED_KEY = 2, 89 WILC_FW_AUTH_ANY = 3, 90 WILC_FW_AUTH_IEEE8021 = 5, 91 WILC_FW_AUTH_SAE = 7, 92 WILC_FW_AUTH_IEE8021X_SHA256 = 9, 93 WILC_FW_AUTH_OPEN_SYSTEM_SHA256 = 13 94}; 95 96enum mfptype { 97 WILC_FW_MFP_NONE = 0x0, 98 WILC_FW_MFP_OPTIONAL = 0x1, 99 WILC_FW_MFP_REQUIRED = 0x2 100}; 101 102enum site_survey { 103 WILC_FW_SITE_SURVEY_1CH = 0, 104 WILC_FW_SITE_SURVEY_ALL_CH = 1, 105 WILC_FW_SITE_SURVEY_OFF = 2 106}; 107 108enum { 109 WILC_FW_ACK_POLICY_NORMAL = 0, 110 WILC_FW_ACK_NO_POLICY, 111}; 112 113enum { 114 WILC_FW_REKEY_POLICY_DISABLE = 1, 115 WILC_FW_REKEY_POLICY_TIME_BASE, 116 WILC_FW_REKEY_POLICY_PKT_BASE, 117 WILC_FW_REKEY_POLICY_TIME_PKT_BASE 118}; 119 120enum { 121 WILC_FW_FILTER_NO = 0x00, 122 WILC_FW_FILTER_AP_ONLY = 0x01, 123 WILC_FW_FILTER_STA_ONLY = 0x02 124}; 125 126enum { 127 WILC_FW_11N_PROT_AUTO = 0, /* Auto */ 128 WILC_FW_11N_NO_PROT, /* Do not use any protection */ 129 WILC_FW_11N_PROT_ERP, /* Protect all ERP frame exchanges */ 130 WILC_FW_11N_PROT_HT, /* Protect all HT frame exchanges */ 131 WILC_FW_11N_PROT_GF /* Protect all GF frame exchanges */ 132}; 133 134enum { 135 WILC_FW_ERP_PROT_SELF_CTS, 136 WILC_FW_ERP_PROT_RTS_CTS, 137}; 138 139enum { 140 WILC_FW_11N_OP_MODE_HT_MIXED = 1, 141 WILC_FW_11N_OP_MODE_HT_ONLY_20MHZ, 142 WILC_FW_11N_OP_MODE_HT_ONLY_20_40MHZ, 143}; 144 145enum { 146 WILC_FW_OBBS_NONHT_NO_DETECT = 0, 147 WILC_FW_OBBS_NONHT_DETECT_ONLY = 1, 148 WILC_FW_OBBS_NONHT_DETECT_PROTECT = 2, 149 WILC_FW_OBBS_NONHT_DETECT_PROTECT_REPORT = 3, 150}; 151 152enum { 153 WILC_FW_HT_PROT_RTS_CTS_NONHT = 0, /* RTS-CTS at non-HT rate */ 154 WILC_FW_HT_PROT_FIRST_FRAME_NONHT, /* First frame at non-HT rate */ 155 WILC_FW_HT_PROT_LSIG_TXOP, /* LSIG TXOP Protection */ 156 WILC_FW_HT_PROT_FIRST_FRAME_MIXED, /* First frame at Mixed format */ 157}; 158 159enum { 160 WILC_FW_SMPS_MODE_STATIC = 1, 161 WILC_FW_SMPS_MODE_DYNAMIC = 2, 162 WILC_FW_SMPS_MODE_MIMO = 3, /* power save disable */ 163}; 164 165enum { 166 WILC_FW_TX_RATE_AUTO = 0, 167 WILC_FW_TX_RATE_MBPS_1 = 1, 168 WILC_FW_TX_RATE_MBPS_2 = 2, 169 WILC_FW_TX_RATE_MBPS_5_5 = 5, 170 WILC_FW_TX_RATE_MBPS_11 = 11, 171 WILC_FW_TX_RATE_MBPS_6 = 6, 172 WILC_FW_TX_RATE_MBPS_9 = 9, 173 WILC_FW_TX_RATE_MBPS_12 = 12, 174 WILC_FW_TX_RATE_MBPS_18 = 18, 175 WILC_FW_TX_RATE_MBPS_24 = 24, 176 WILC_FW_TX_RATE_MBPS_36 = 36, 177 WILC_FW_TX_RATE_MBPS_48 = 48, 178 WILC_FW_TX_RATE_MBPS_54 = 54 179}; 180 181enum { 182 WILC_FW_DEFAULT_SCAN = 0, 183 WILC_FW_USER_SCAN = BIT(0), 184 WILC_FW_OBSS_PERIODIC_SCAN = BIT(1), 185 WILC_FW_OBSS_ONETIME_SCAN = BIT(2) 186}; 187 188enum { 189 WILC_FW_ACTION_FRM_IDX = 0, 190 WILC_FW_PROBE_REQ_IDX = 1, 191 WILC_FW_AUTH_REQ_IDX = 2 192}; 193 194enum wid_type { 195 WID_CHAR = 0, 196 WID_SHORT = 1, 197 WID_INT = 2, 198 WID_STR = 3, 199 WID_BIN_DATA = 4, 200 WID_BIN = 5, 201}; 202 203struct wid { 204 u16 id; 205 enum wid_type type; 206 s32 size; 207 s8 *val; 208}; 209 210enum { 211 WID_NIL = 0xffff, 212 213 /* 214 * BSS Type 215 * ----------------------------------------------------------- 216 * Configuration : Infrastructure Independent Access Point 217 * Values to set : 0 1 2 218 * ----------------------------------------------------------- 219 */ 220 WID_BSS_TYPE = 0x0000, 221 222 /* 223 * Transmit Rate 224 * ----------------------------------------------------------- 225 * Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 226 * Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 227 * ----------------------------------------------------------- 228 */ 229 WID_CURRENT_TX_RATE = 0x0001, 230 231 /* 232 * Channel 233 * ----------------------------------------------------------- 234 * Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 235 * Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 236 * ----------------------------------------------------------- 237 */ 238 WID_CURRENT_CHANNEL = 0x0002, 239 240 /* 241 * Preamble 242 * ----------------------------------------------------------- 243 * Configuration : short long Auto 244 * Values to set : 0 1 2 245 * ----------------------------------------------------------- 246 */ 247 WID_PREAMBLE = 0x0003, 248 249 /* 250 * 11g operating mode (ignored if 11g not present) 251 * ----------------------------------------------------------- 252 * Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) 253 * Values to set : 1 2 3 254 * ----------------------------------------------------------- 255 */ 256 WID_11G_OPERATING_MODE = 0x0004, 257 258 /* 259 * Mac status (response only) 260 * ----------------------------------------------------------- 261 * Configuration : disconnect connect 262 * Values to get : 0 1 263 * ----------------------------------------------------------- 264 */ 265 WID_STATUS = 0x0005, 266 267 /* 268 * Scan type 269 * ----------------------------------------------------------- 270 * Configuration : Passive Scanning Active Scanning 271 * Values to set : 0 1 272 * ----------------------------------------------------------- 273 */ 274 WID_SCAN_TYPE = 0x0007, 275 276 /* 277 * Key Id (WEP default key Id) 278 * ----------------------------------------------------------- 279 * Configuration : Any value between 0 to 3 280 * Values to set : Same value. Default is 0 281 * ----------------------------------------------------------- 282 */ 283 WID_KEY_ID = 0x0009, 284 285 /* 286 * QoS Enable 287 * ----------------------------------------------------------- 288 * Configuration : QoS Disable WMM Enable 289 * Values to set : 0 1 290 * ----------------------------------------------------------- 291 */ 292 WID_QOS_ENABLE = 0x000A, 293 294 /* 295 * Power Management 296 * ----------------------------------------------------------- 297 * Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE 298 * Values to set : 0 1 2 299 * ----------------------------------------------------------- 300 */ 301 WID_POWER_MANAGEMENT = 0x000B, 302 303 /* 304 * WEP/802 11I Configuration 305 * ----------------------------------------------------------- 306 * Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP 307 * Values (0x) : 00 03 07 29 49 31 51 308 * Configuration:WPA-AES+TKIP RSN-AES+TKIP 309 * Values (0x) : 69 71 310 * ----------------------------------------------------------- 311 */ 312 WID_11I_MODE = 0x000C, 313 314 /* 315 * WEP Configuration: Used in BSS STA mode only when WEP is enabled 316 * ----------------------------------------------------------- 317 * Configuration : Open System Shared Key Any Type | 802.1x Auth 318 * Values (0x) : 01 02 03 | BIT2 319 * ----------------------------------------------------------- 320 */ 321 WID_AUTH_TYPE = 0x000D, 322 323 /* 324 * Site Survey Type 325 * ----------------------------------------------------------- 326 * Configuration : Values to set 327 * Survey 1 Channel : 0 328 * survey all Channels : 1 329 * Disable Site Survey : 2 330 * ----------------------------------------------------------- 331 */ 332 WID_SITE_SURVEY = 0x000E, 333 334 /* 335 * Listen Interval 336 * ----------------------------------------------------------- 337 * Configuration : Any value between 1 to 255 338 * Values to set : Same value. Default is 3 339 * ----------------------------------------------------------- 340 */ 341 WID_LISTEN_INTERVAL = 0x000F, 342 343 /* 344 * DTIM Period 345 * ----------------------------------------------------------- 346 * Configuration : Any value between 1 to 255 347 * Values to set : Same value. Default is 3 348 * ----------------------------------------------------------- 349 */ 350 WID_DTIM_PERIOD = 0x0010, 351 352 /* 353 * ACK Policy 354 * ----------------------------------------------------------- 355 * Configuration : Normal Ack No Ack 356 * Values to set : 0 1 357 * ----------------------------------------------------------- 358 */ 359 WID_ACK_POLICY = 0x0011, 360 361 /* 362 * Reset MAC (Set only) 363 * ----------------------------------------------------------- 364 * Configuration : Don't Reset Reset No Request 365 * Values to set : 0 1 2 366 * ----------------------------------------------------------- 367 */ 368 WID_RESET = 0x0012, 369 370 /* 371 * Broadcast SSID Option: Setting this will adhere to "" SSID element 372 * ----------------------------------------------------------- 373 * Configuration : Enable Disable 374 * Values to set : 1 0 375 * ----------------------------------------------------------- 376 */ 377 WID_BCAST_SSID = 0x0015, 378 379 /* 380 * Disconnect (Station) 381 * ----------------------------------------------------------- 382 * Configuration : Association ID 383 * Values to set : Association ID 384 * ----------------------------------------------------------- 385 */ 386 WID_DISCONNECT = 0x0016, 387 388 /* 389 * 11a Tx Power Level 390 * ----------------------------------------------------------- 391 * Configuration : Sets TX Power (Higher the value greater the power) 392 * Values to set : Any value between 0 and 63 (inclusive Default 48) 393 * ----------------------------------------------------------- 394 */ 395 WID_TX_POWER_LEVEL_11A = 0x0018, 396 397 /* 398 * Group Key Update Policy Selection 399 * ----------------------------------------------------------- 400 * Configuration : Disabled timeBased packetBased timePacketBased 401 * Values to set : 1 2 3 4 402 * ----------------------------------------------------------- 403 */ 404 WID_REKEY_POLICY = 0x0019, 405 406 /* 407 * Allow Short Slot 408 * ----------------------------------------------------------- 409 * Configuration : Disallow Short Slot Allow Short Slot 410 * (Enable Only Long Slot) (Enable Short Slot if applicable) 411 * Values to set : 0 1 412 * ----------------------------------------------------------- 413 */ 414 WID_SHORT_SLOT_ALLOWED = 0x001A, 415 416 WID_PHY_ACTIVE_REG = 0x001B, 417 418 /* 419 * 11b Tx Power Level 420 * ----------------------------------------------------------- 421 * Configuration : Sets TX Power (Higher the value greater the power) 422 * Values to set : Any value between 0 and 63 (inclusive Default 48) 423 * ----------------------------------------------------------- 424 */ 425 WID_TX_POWER_LEVEL_11B = 0x001D, 426 427 /* 428 * Scan Request 429 * ----------------------------------------------------------- 430 * Configuration : Request default scan 431 * Values to set : 0 432 * ----------------------------------------------------------- 433 */ 434 WID_START_SCAN_REQ = 0x001E, 435 436 /* 437 * Rssi (get only) 438 * ----------------------------------------------------------- 439 * Configuration : 440 * Values to get : Rssi value 441 * ----------------------------------------------------------- 442 */ 443 WID_RSSI = 0x001F, 444 445 /* 446 * Join Request 447 * ----------------------------------------------------------- 448 * Configuration : Request to join 449 * Values to set : index of scan result 450 * ----------------------------------------------------------- 451 */ 452 WID_JOIN_REQ = 0x0020, 453 454 WID_LINKSPEED = 0x0026, 455 456 /* 457 * Enable User Control of TX Power 458 * ----------------------------------------------------------- 459 * Configuration : Disable Enable 460 * Values to set : 0 1 461 * ----------------------------------------------------------- 462 */ 463 WID_USER_CONTROL_ON_TX_POWER = 0x0027, 464 465 WID_MEMORY_ACCESS_8BIT = 0x0029, 466 467 /* 468 * Enable Auto RX Sensitivity feature 469 * ----------------------------------------------------------- 470 * Configuration : Disable Enable 471 * Values to set : 0 1 472 * ----------------------------------------------------------- 473 */ 474 WID_AUTO_RX_SENSITIVITY = 0x0032, 475 476 /* 477 * Receive Buffer Based Ack 478 * ----------------------------------------------------------- 479 * Configuration : Disable Enable 480 * Values to set : 0 1 481 * ----------------------------------------------------------- 482 */ 483 WID_DATAFLOW_CONTROL = 0x0033, 484 485 /* 486 * Scan Filter 487 * ----------------------------------------------------------- 488 * Configuration : Class No filter AP only Station Only 489 * Values to set : 0 1 2 490 * Configuration : Priority High Rssi Low Rssi Detect 491 * Values to set : 0 0x4 0x0 492 * Configuration : Channel filter off filter on 493 * Values to set : 0 0x10 494 * ----------------------------------------------------------- 495 */ 496 WID_SCAN_FILTER = 0x0036, 497 498 /* 499 * Link Loss Threshold (measure in the beacon period) 500 * ----------------------------------------------------------- 501 * Configuration : Any value between 10 and 254(Set to 255 disable) 502 * Values to set : Same value. Default is 10 503 * ----------------------------------------------------------- 504 */ 505 WID_LINK_LOSS_THRESHOLD = 0x0037, 506 507 WID_ABORT_RUNNING_SCAN = 0x003E, 508 509 /* NMAC Character WID list */ 510 WID_WPS_START = 0x0043, 511 512 /* 513 * Protection mode for MAC 514 * ----------------------------------------------------------- 515 * Configuration : Auto No protection ERP HT GF 516 * Values to set : 0 1 2 3 4 517 * ----------------------------------------------------------- 518 */ 519 WID_11N_PROT_MECH = 0x0080, 520 521 /* 522 * ERP Protection type for MAC 523 * ----------------------------------------------------------- 524 * Configuration : Self-CTS RTS-CTS 525 * Values to set : 0 1 526 * ----------------------------------------------------------- 527 */ 528 WID_11N_ERP_PROT_TYPE = 0x0081, 529 530 /* 531 * HT Option Enable 532 * ----------------------------------------------------------- 533 * Configuration : HT Enable HT Disable 534 * Values to set : 1 0 535 * ----------------------------------------------------------- 536 */ 537 WID_11N_ENABLE = 0x0082, 538 539 /* 540 * 11n Operating mode (Note that 11g operating mode will also be 541 * used in addition to this, if this is set to HT Mixed mode) 542 * ----------------------------------------------------------- 543 * Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz 544 * Values to set : 1 2 3 545 * ----------------------------------------------------------- 546 */ 547 WID_11N_OPERATING_MODE = 0x0083, 548 549 /* 550 * 11n OBSS non-HT STA Detection flag 551 * ----------------------------------------------------------- 552 * Configuration : Do not detect 553 * Values to set : 0 554 * Configuration : Detect, do not protect or report 555 * Values to set : 1 556 * Configuration : Detect, protect and do not report 557 * Values to set : 2 558 * Configuration : Detect, protect and report to other BSS 559 * Values to set : 3 560 * ----------------------------------------------------------- 561 */ 562 WID_11N_OBSS_NONHT_DETECTION = 0x0084, 563 564 /* 565 * 11n HT Protection Type 566 * ----------------------------------------------------------- 567 * Configuration : RTS-CTS First Frame Exchange at non-HT-rate 568 * Values to set : 0 1 569 * Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt 570 * Values to set : 2 3 571 * ----------------------------------------------------------- 572 */ 573 WID_11N_HT_PROT_TYPE = 0x0085, 574 575 /* 576 * 11n RIFS Protection Enable Flag 577 * ----------------------------------------------------------- 578 * Configuration : Disable Enable 579 * Values to set : 0 1 580 * ----------------------------------------------------------- 581 */ 582 WID_11N_RIFS_PROT_ENABLE = 0x0086, 583 584 /* 585 * SMPS Mode 586 * ----------------------------------------------------------- 587 * Configuration : Static Dynamic MIMO (Power Save Disabled) 588 * Values to set : 1 2 3 589 * ----------------------------------------------------------- 590 */ 591 WID_11N_SMPS_MODE = 0x0087, 592 593 /* 594 * Current transmit MCS 595 * ----------------------------------------------------------- 596 * Configuration : MCS Index for data rate 597 * Values to set : 0 to 7 598 * ----------------------------------------------------------- 599 */ 600 WID_11N_CURRENT_TX_MCS = 0x0088, 601 602 WID_11N_PRINT_STATS = 0x0089, 603 604 /* 605 * 11n Short GI Enable Flag 606 * ----------------------------------------------------------- 607 * Configuration : Disable Enable 608 * Values to set : 0 1 609 * ----------------------------------------------------------- 610 */ 611 WID_11N_SHORT_GI_ENABLE = 0x008D, 612 613 /* 614 * 11n RIFS Enable Flag 615 * ----------------------------------------------------------- 616 * Configuration : Disable Enable 617 * Values to set : 0 1 618 * ----------------------------------------------------------- 619 */ 620 WID_RIFS_MODE = 0x0094, 621 622 /* 623 * TX Abort Feature 624 * ----------------------------------------------------------- 625 * Configuration : Disable Self CTS Enable Self CTS 626 * Values to set : 0 1 627 * Configuration : Disable TX Abort Enable TX Abort 628 * Values to set : 2 3 629 * Configuration : Enable HW TX Abort Enable SW TX Abort 630 * Values to set : 4 5 631 * ----------------------------------------------------------- 632 */ 633 WID_TX_ABORT_CONFIG = 0x00A1, 634 635 WID_REG_TSSI_11B_VALUE = 0x00A6, 636 WID_REG_TSSI_11G_VALUE = 0x00A7, 637 WID_REG_TSSI_11N_VALUE = 0x00A8, 638 WID_TX_CALIBRATION = 0x00A9, 639 WID_DSCR_TSSI_11B_VALUE = 0x00AA, 640 WID_DSCR_TSSI_11G_VALUE = 0x00AB, 641 WID_DSCR_TSSI_11N_VALUE = 0x00AC, 642 643 /* 644 * Immediate Block-Ack Support 645 * ----------------------------------------------------------- 646 * Configuration : Disable Enable 647 * Values to set : 0 1 648 * ----------------------------------------------------------- 649 */ 650 WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF, 651 652 /* 653 * TXOP Disable Flag 654 * ----------------------------------------------------------- 655 * Configuration : Disable Enable 656 * Values to set : 1 0 657 * ----------------------------------------------------------- 658 */ 659 WID_11N_TXOP_PROT_DISABLE = 0x00B0, 660 661 WID_TX_POWER_LEVEL_11N = 0x00B1, 662 663 /* Custom Character WID list */ 664 /* SCAN Complete notification WID*/ 665 WID_SCAN_COMPLETE = 0x00C9, 666 667 WID_DEL_BEACON = 0x00CA, 668 669 WID_LOG_TERMINAL_SWITCH = 0x00CD, 670 WID_TX_POWER = 0x00CE, 671 WID_WOWLAN_TRIGGER = 0X00CF, 672 WID_SET_MFP = 0x00D0, 673 674 WID_DEFAULT_MGMT_KEY_ID = 0x00D2, 675 /* EMAC Short WID list */ 676 /* RTS Threshold */ 677 /* 678 * ----------------------------------------------------------- 679 * Configuration : Any value between 256 to 2347 680 * Values to set : Same value. Default is 2347 681 * ----------------------------------------------------------- 682 */ 683 WID_RTS_THRESHOLD = 0x1000, 684 685 /* 686 * Fragmentation Threshold 687 * ----------------------------------------------------------- 688 * Configuration : Any value between 256 to 2346 689 * Values to set : Same value. Default is 2346 690 * ----------------------------------------------------------- 691 */ 692 WID_FRAG_THRESHOLD = 0x1001, 693 694 WID_SHORT_RETRY_LIMIT = 0x1002, 695 WID_LONG_RETRY_LIMIT = 0x1003, 696 WID_BEACON_INTERVAL = 0x1006, 697 WID_MEMORY_ACCESS_16BIT = 0x1008, 698 WID_PASSIVE_SCAN_TIME = 0x100D, 699 WID_JOIN_START_TIMEOUT = 0x100F, 700 WID_ASOC_TIMEOUT = 0x1011, 701 WID_11I_PROTOCOL_TIMEOUT = 0x1012, 702 WID_EAPOL_RESPONSE_TIMEOUT = 0x1013, 703 704 /* NMAC Short WID list */ 705 WID_11N_SIG_QUAL_VAL = 0x1085, 706 WID_CCA_THRESHOLD = 0x1087, 707 708 /* Custom Short WID list */ 709 710 /* EMAC Integer WID list */ 711 WID_FAILED_COUNT = 0x2000, 712 WID_RETRY_COUNT = 0x2001, 713 WID_MULTIPLE_RETRY_COUNT = 0x2002, 714 WID_FRAME_DUPLICATE_COUNT = 0x2003, 715 WID_ACK_FAILURE_COUNT = 0x2004, 716 WID_RECEIVED_FRAGMENT_COUNT = 0x2005, 717 WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006, 718 WID_FCS_ERROR_COUNT = 0x2007, 719 WID_SUCCESS_FRAME_COUNT = 0x2008, 720 WID_HUT_TX_COUNT = 0x200A, 721 WID_TX_FRAGMENT_COUNT = 0x200B, 722 WID_TX_MULTICAST_FRAME_COUNT = 0x200C, 723 WID_RTS_SUCCESS_COUNT = 0x200D, 724 WID_RTS_FAILURE_COUNT = 0x200E, 725 WID_WEP_UNDECRYPTABLE_COUNT = 0x200F, 726 WID_REKEY_PERIOD = 0x2010, 727 WID_REKEY_PACKET_COUNT = 0x2011, 728 WID_1X_SERV_ADDR = 0x2012, 729 WID_STACK_IP_ADDR = 0x2013, 730 WID_STACK_NETMASK_ADDR = 0x2014, 731 WID_HW_RX_COUNT = 0x2015, 732 WID_MEMORY_ADDRESS = 0x201E, 733 WID_MEMORY_ACCESS_32BIT = 0x201F, 734 735 /* NMAC Integer WID list */ 736 /* Custom Integer WID list */ 737 WID_GET_INACTIVE_TIME = 0x2084, 738 /* EMAC String WID list */ 739 WID_SSID = 0x3000, 740 WID_FIRMWARE_VERSION = 0x3001, 741 WID_OPERATIONAL_RATE_SET = 0x3002, 742 WID_BSSID = 0x3003, 743 WID_WEP_KEY_VALUE = 0x3004, 744 WID_11I_PSK = 0x3008, 745 WID_11E_P_ACTION_REQ = 0x3009, 746 WID_1X_KEY = 0x300A, 747 WID_HARDWARE_VERSION = 0x300B, 748 WID_MAC_ADDR = 0x300C, 749 WID_HUT_DEST_ADDR = 0x300D, 750 WID_PHY_VERSION = 0x300F, 751 WID_SUPP_USERNAME = 0x3010, 752 WID_SUPP_PASSWORD = 0x3011, 753 WID_SITE_SURVEY_RESULTS = 0x3012, 754 WID_RX_POWER_LEVEL = 0x3013, 755 WID_SET_STA_MAC_INACTIVE_TIME = 0x3017, 756 WID_ADD_WEP_KEY = 0x3019, 757 WID_REMOVE_WEP_KEY = 0x301A, 758 WID_ADD_PTK = 0x301B, 759 WID_ADD_RX_GTK = 0x301C, 760 WID_ADD_TX_GTK = 0x301D, 761 WID_REMOVE_KEY = 0x301E, 762 WID_ASSOC_REQ_INFO = 0x301F, 763 WID_ASSOC_RES_INFO = 0x3020, 764 WID_ADD_IGTK = 0x3022, 765 WID_MANUFACTURER = 0x3026, /* Added for CAPI tool */ 766 WID_MODEL_NAME = 0x3027, /* Added for CAPI tool */ 767 WID_MODEL_NUM = 0x3028, /* Added for CAPI tool */ 768 WID_DEVICE_NAME = 0x3029, /* Added for CAPI tool */ 769 770 /* NMAC String WID list */ 771 WID_SET_OPERATION_MODE = 0x3079, 772 WID_11N_P_ACTION_REQ = 0x3080, 773 WID_HUT_TEST_ID = 0x3081, 774 WID_PMKID_INFO = 0x3082, 775 WID_FIRMWARE_INFO = 0x3083, 776 WID_REGISTER_FRAME = 0x3084, 777 WID_DEL_ALL_STA = 0x3085, 778 WID_REMAIN_ON_CHAN = 0x3996, 779 WID_SSID_PROBE_REQ = 0x3997, 780 WID_JOIN_REQ_EXTENDED = 0x3998, 781 782 WID_IP_ADDRESS = 0x3999, 783 784 /* Custom String WID list */ 785 786 /* EMAC Binary WID list */ 787 WID_UAPSD_CONFIG = 0x4001, 788 WID_UAPSD_STATUS = 0x4002, 789 WID_WMM_AP_AC_PARAMS = 0x4003, 790 WID_WMM_STA_AC_PARAMS = 0x4004, 791 WID_NETWORK_INFO = 0x4005, 792 WID_STA_JOIN_INFO = 0x4006, 793 WID_CONNECTED_STA_LIST = 0x4007, 794 795 /* NMAC Binary WID list */ 796 WID_11N_AUTORATE_TABLE = 0x4080, 797 798 WID_SCAN_CHANNEL_LIST = 0x4084, 799 800 WID_INFO_ELEMENT_PROBE = 0x4085, 801 WID_INFO_ELEMENT_ASSOCIATE = 0x4086, 802 WID_ADD_STA = 0X4087, 803 WID_REMOVE_STA = 0X4088, 804 WID_EDIT_STA = 0X4089, 805 WID_ADD_BEACON = 0x408a, 806 807 WID_SETUP_MULTICAST_FILTER = 0x408b, 808 WID_EXTERNAL_AUTH_PARAM = 0x408d, 809 /* Miscellaneous WIDs */ 810 WID_ALL = 0x7FFE, 811 WID_MAX = 0xFFFF 812}; 813 814#endif 815