1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
4 * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
5 */
6
7#include <linux/of.h>
8#include <linux/mtd/mtd.h>
9#include <linux/mtd/partitions.h>
10#include <linux/etherdevice.h>
11#include <asm/unaligned.h>
12#include "mt7601u.h"
13#include "eeprom.h"
14#include "mac.h"
15
16static bool
17field_valid(u8 val)
18{
19	return val != 0xff;
20}
21
22static s8
23field_validate(u8 val)
24{
25	if (!field_valid(val))
26		return 0;
27
28	return val;
29}
30
31static int
32mt7601u_efuse_read(struct mt7601u_dev *dev, u16 addr, u8 *data,
33		   enum mt7601u_eeprom_access_modes mode)
34{
35	u32 val;
36	int i;
37
38	val = mt76_rr(dev, MT_EFUSE_CTRL);
39	val &= ~(MT_EFUSE_CTRL_AIN |
40		 MT_EFUSE_CTRL_MODE);
41	val |= FIELD_PREP(MT_EFUSE_CTRL_AIN, addr & ~0xf) |
42	       FIELD_PREP(MT_EFUSE_CTRL_MODE, mode) |
43	       MT_EFUSE_CTRL_KICK;
44	mt76_wr(dev, MT_EFUSE_CTRL, val);
45
46	if (!mt76_poll(dev, MT_EFUSE_CTRL, MT_EFUSE_CTRL_KICK, 0, 1000))
47		return -ETIMEDOUT;
48
49	val = mt76_rr(dev, MT_EFUSE_CTRL);
50	if ((val & MT_EFUSE_CTRL_AOUT) == MT_EFUSE_CTRL_AOUT) {
51		/* Parts of eeprom not in the usage map (0x80-0xc0,0xf0)
52		 * will not return valid data but it's ok.
53		 */
54		memset(data, 0xff, 16);
55		return 0;
56	}
57
58	for (i = 0; i < 4; i++) {
59		val = mt76_rr(dev, MT_EFUSE_DATA(i));
60		put_unaligned_le32(val, data + 4 * i);
61	}
62
63	return 0;
64}
65
66static int
67mt7601u_efuse_physical_size_check(struct mt7601u_dev *dev)
68{
69	const int map_reads = DIV_ROUND_UP(MT_EFUSE_USAGE_MAP_SIZE, 16);
70	u8 data[round_up(MT_EFUSE_USAGE_MAP_SIZE, 16)];
71	int ret, i;
72	u32 start = 0, end = 0, cnt_free;
73
74	for (i = 0; i < map_reads; i++) {
75		ret = mt7601u_efuse_read(dev, MT_EE_USAGE_MAP_START + i * 16,
76					 data + i * 16, MT_EE_PHYSICAL_READ);
77		if (ret)
78			return ret;
79	}
80
81	for (i = 0; i < MT_EFUSE_USAGE_MAP_SIZE; i++)
82		if (!data[i]) {
83			if (!start)
84				start = MT_EE_USAGE_MAP_START + i;
85			end = MT_EE_USAGE_MAP_START + i;
86		}
87	cnt_free = end - start + 1;
88
89	if (MT_EFUSE_USAGE_MAP_SIZE - cnt_free < 5) {
90		dev_err(dev->dev, "Error: your device needs default EEPROM file and this driver doesn't support it!\n");
91		return -EINVAL;
92	}
93
94	return 0;
95}
96
97static bool
98mt7601u_has_tssi(struct mt7601u_dev *dev, u8 *eeprom)
99{
100	u16 nic_conf1 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_1);
101
102	return (u16)~nic_conf1 && (nic_conf1 & MT_EE_NIC_CONF_1_TX_ALC_EN);
103}
104
105static void
106mt7601u_set_chip_cap(struct mt7601u_dev *dev, u8 *eeprom)
107{
108	u16 nic_conf0 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_0);
109	u16 nic_conf1 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_1);
110
111	if (!field_valid(nic_conf1 & 0xff))
112		nic_conf1 &= 0xff00;
113
114	dev->ee->tssi_enabled = mt7601u_has_tssi(dev, eeprom) &&
115				!(nic_conf1 & MT_EE_NIC_CONF_1_TEMP_TX_ALC);
116
117	if (nic_conf1 & MT_EE_NIC_CONF_1_HW_RF_CTRL)
118		dev_err(dev->dev,
119			"Error: this driver does not support HW RF ctrl\n");
120
121	if (!field_valid(nic_conf0 >> 8))
122		return;
123
124	if (FIELD_GET(MT_EE_NIC_CONF_0_RX_PATH, nic_conf0) > 1 ||
125	    FIELD_GET(MT_EE_NIC_CONF_0_TX_PATH, nic_conf0) > 1)
126		dev_err(dev->dev,
127			"Error: device has more than 1 RX/TX stream!\n");
128}
129
130static void mt7601u_set_channel_target_power(struct mt7601u_dev *dev,
131					     u8 *eeprom, u8 max_pwr)
132{
133	u8 trgt_pwr = eeprom[MT_EE_TX_TSSI_TARGET_POWER];
134
135	if (trgt_pwr > max_pwr || !trgt_pwr) {
136		dev_warn(dev->dev, "Error: EEPROM trgt power invalid %hhx!\n",
137			 trgt_pwr);
138		trgt_pwr = 0x20;
139	}
140
141	memset(dev->ee->chan_pwr, trgt_pwr, sizeof(dev->ee->chan_pwr));
142}
143
144static void
145mt7601u_set_channel_power(struct mt7601u_dev *dev, u8 *eeprom)
146{
147	u32 i, val;
148	u8 max_pwr;
149
150	val = mt7601u_rr(dev, MT_TX_ALC_CFG_0);
151	max_pwr = FIELD_GET(MT_TX_ALC_CFG_0_LIMIT_0, val);
152
153	if (mt7601u_has_tssi(dev, eeprom)) {
154		mt7601u_set_channel_target_power(dev, eeprom, max_pwr);
155		return;
156	}
157
158	for (i = 0; i < 14; i++) {
159		s8 power = field_validate(eeprom[MT_EE_TX_POWER_OFFSET + i]);
160
161		if (power > max_pwr || power < 0)
162			power = MT7601U_DEFAULT_TX_POWER;
163
164		dev->ee->chan_pwr[i] = power;
165	}
166}
167
168static void
169mt7601u_set_country_reg(struct mt7601u_dev *dev, u8 *eeprom)
170{
171	/* Note: - region 31 is not valid for mt7601u (see rtmp_init.c)
172	 *	 - comments in rtmp_def.h are incorrect (see rt_channel.c)
173	 */
174	static const struct reg_channel_bounds chan_bounds[] = {
175		/* EEPROM country regions 0 - 7 */
176		{  1, 11 },	{  1, 13 },	{ 10,  2 },	{ 10,  4 },
177		{ 14,  1 },	{  1, 14 },	{  3,  7 },	{  5,  9 },
178		/* EEPROM country regions 32 - 33 */
179		{  1, 11 },	{  1, 14 }
180	};
181	u8 val = eeprom[MT_EE_COUNTRY_REGION];
182	int idx = -1;
183
184	if (val < 8)
185		idx = val;
186	if (val > 31 && val < 33)
187		idx = val - 32 + 8;
188
189	if (idx != -1)
190		dev_info(dev->dev,
191			 "EEPROM country region %02x (channels %d-%d)\n",
192			 val, chan_bounds[idx].start,
193			 chan_bounds[idx].start + chan_bounds[idx].num - 1);
194	else
195		idx = 5; /* channels 1 - 14 */
196
197	dev->ee->reg = chan_bounds[idx];
198
199	/* TODO: country region 33 is special - phy should be set to B-mode
200	 *	 before entering channel 14 (see sta/connect.c)
201	 */
202}
203
204static void
205mt7601u_set_rf_freq_off(struct mt7601u_dev *dev, u8 *eeprom)
206{
207	u8 comp;
208
209	dev->ee->rf_freq_off = field_validate(eeprom[MT_EE_FREQ_OFFSET]);
210	comp = field_validate(eeprom[MT_EE_FREQ_OFFSET_COMPENSATION]);
211
212	if (comp & BIT(7))
213		dev->ee->rf_freq_off -= comp & 0x7f;
214	else
215		dev->ee->rf_freq_off += comp;
216}
217
218static void
219mt7601u_set_rssi_offset(struct mt7601u_dev *dev, u8 *eeprom)
220{
221	int i;
222	s8 *rssi_offset = dev->ee->rssi_offset;
223
224	for (i = 0; i < 2; i++) {
225		rssi_offset[i] = eeprom[MT_EE_RSSI_OFFSET + i];
226
227		if (rssi_offset[i] < -10 || rssi_offset[i] > 10) {
228			dev_warn(dev->dev,
229				 "Warning: EEPROM RSSI is invalid %02hhx\n",
230				 rssi_offset[i]);
231			rssi_offset[i] = 0;
232		}
233	}
234}
235
236static void
237mt7601u_extra_power_over_mac(struct mt7601u_dev *dev)
238{
239	u32 val;
240
241	val = ((mt7601u_rr(dev, MT_TX_PWR_CFG_1) & 0x0000ff00) >> 8);
242	val |= ((mt7601u_rr(dev, MT_TX_PWR_CFG_2) & 0x0000ff00) << 8);
243	mt7601u_wr(dev, MT_TX_PWR_CFG_7, val);
244
245	val = ((mt7601u_rr(dev, MT_TX_PWR_CFG_4) & 0x0000ff00) >> 8);
246	mt7601u_wr(dev, MT_TX_PWR_CFG_9, val);
247}
248
249static void
250mt7601u_set_power_rate(struct power_per_rate *rate, s8 delta, u8 value)
251{
252	/* Invalid? Note: vendor driver does not handle this */
253	if (value == 0xff)
254		return;
255
256	rate->raw = s6_validate(value);
257	rate->bw20 = s6_to_int(value);
258	/* Note: vendor driver does cap the value to s6 right away */
259	rate->bw40 = rate->bw20 + delta;
260}
261
262static void
263mt7601u_save_power_rate(struct mt7601u_dev *dev, s8 delta, u32 val, int i)
264{
265	struct mt7601u_rate_power *t = &dev->ee->power_rate_table;
266
267	switch (i) {
268	case 0:
269		mt7601u_set_power_rate(&t->cck[0], delta, (val >> 0) & 0xff);
270		mt7601u_set_power_rate(&t->cck[1], delta, (val >> 8) & 0xff);
271		/* Save cck bw20 for fixups of channel 14 */
272		dev->ee->real_cck_bw20[0] = t->cck[0].bw20;
273		dev->ee->real_cck_bw20[1] = t->cck[1].bw20;
274
275		mt7601u_set_power_rate(&t->ofdm[0], delta, (val >> 16) & 0xff);
276		mt7601u_set_power_rate(&t->ofdm[1], delta, (val >> 24) & 0xff);
277		break;
278	case 1:
279		mt7601u_set_power_rate(&t->ofdm[2], delta, (val >> 0) & 0xff);
280		mt7601u_set_power_rate(&t->ofdm[3], delta, (val >> 8) & 0xff);
281		mt7601u_set_power_rate(&t->ht[0], delta, (val >> 16) & 0xff);
282		mt7601u_set_power_rate(&t->ht[1], delta, (val >> 24) & 0xff);
283		break;
284	case 2:
285		mt7601u_set_power_rate(&t->ht[2], delta, (val >> 0) & 0xff);
286		mt7601u_set_power_rate(&t->ht[3], delta, (val >> 8) & 0xff);
287		break;
288	}
289}
290
291static s8
292get_delta(u8 val)
293{
294	s8 ret;
295
296	if (!field_valid(val) || !(val & BIT(7)))
297		return 0;
298
299	ret = val & 0x1f;
300	if (ret > 8)
301		ret = 8;
302	if (val & BIT(6))
303		ret = -ret;
304
305	return ret;
306}
307
308static void
309mt7601u_config_tx_power_per_rate(struct mt7601u_dev *dev, u8 *eeprom)
310{
311	u32 val;
312	s8 bw40_delta;
313	int i;
314
315	bw40_delta = get_delta(eeprom[MT_EE_TX_POWER_DELTA_BW40]);
316
317	for (i = 0; i < 5; i++) {
318		val = get_unaligned_le32(eeprom + MT_EE_TX_POWER_BYRATE(i));
319
320		mt7601u_save_power_rate(dev, bw40_delta, val, i);
321
322		if (~val)
323			mt7601u_wr(dev, MT_TX_PWR_CFG_0 + i * 4, val);
324	}
325
326	mt7601u_extra_power_over_mac(dev);
327}
328
329static void
330mt7601u_init_tssi_params(struct mt7601u_dev *dev, u8 *eeprom)
331{
332	struct tssi_data *d = &dev->ee->tssi_data;
333
334	if (!dev->ee->tssi_enabled)
335		return;
336
337	d->slope = eeprom[MT_EE_TX_TSSI_SLOPE];
338	d->tx0_delta_offset = eeprom[MT_EE_TX_TSSI_OFFSET] * 1024;
339	d->offset[0] = eeprom[MT_EE_TX_TSSI_OFFSET_GROUP];
340	d->offset[1] = eeprom[MT_EE_TX_TSSI_OFFSET_GROUP + 1];
341	d->offset[2] = eeprom[MT_EE_TX_TSSI_OFFSET_GROUP + 2];
342}
343
344int
345mt7601u_eeprom_init(struct mt7601u_dev *dev)
346{
347	u8 *eeprom;
348	int i, ret;
349
350	ret = mt7601u_efuse_physical_size_check(dev);
351	if (ret)
352		return ret;
353
354	dev->ee = devm_kzalloc(dev->dev, sizeof(*dev->ee), GFP_KERNEL);
355	if (!dev->ee)
356		return -ENOMEM;
357
358	eeprom = kmalloc(MT7601U_EEPROM_SIZE, GFP_KERNEL);
359	if (!eeprom)
360		return -ENOMEM;
361
362	for (i = 0; i + 16 <= MT7601U_EEPROM_SIZE; i += 16) {
363		ret = mt7601u_efuse_read(dev, i, eeprom + i, MT_EE_READ);
364		if (ret)
365			goto out;
366	}
367
368	if (eeprom[MT_EE_VERSION_EE] > MT7601U_EE_MAX_VER)
369		dev_warn(dev->dev,
370			 "Warning: unsupported EEPROM version %02hhx\n",
371			 eeprom[MT_EE_VERSION_EE]);
372	dev_info(dev->dev, "EEPROM ver:%02hhx fae:%02hhx\n",
373		 eeprom[MT_EE_VERSION_EE], eeprom[MT_EE_VERSION_FAE]);
374
375	mt7601u_set_macaddr(dev, eeprom + MT_EE_MAC_ADDR);
376	mt7601u_set_chip_cap(dev, eeprom);
377	mt7601u_set_channel_power(dev, eeprom);
378	mt7601u_set_country_reg(dev, eeprom);
379	mt7601u_set_rf_freq_off(dev, eeprom);
380	mt7601u_set_rssi_offset(dev, eeprom);
381	dev->ee->ref_temp = eeprom[MT_EE_REF_TEMP];
382	dev->ee->lna_gain = eeprom[MT_EE_LNA_GAIN];
383
384	mt7601u_config_tx_power_per_rate(dev, eeprom);
385
386	mt7601u_init_tssi_params(dev, eeprom);
387out:
388	kfree(eeprom);
389	return ret;
390}
391