1/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ 2/* 3 * Copyright (C) 2012-2014, 2018-2024 Intel Corporation 4 * Copyright (C) 2013-2015 Intel Mobile Communications GmbH 5 * Copyright (C) 2016-2017 Intel Deutschland GmbH 6 */ 7#ifndef __iwl_fw_api_nvm_reg_h__ 8#define __iwl_fw_api_nvm_reg_h__ 9 10#include "fw/regulatory.h" 11/** 12 * enum iwl_regulatory_and_nvm_subcmd_ids - regulatory/NVM commands 13 */ 14enum iwl_regulatory_and_nvm_subcmd_ids { 15 /** 16 * @NVM_ACCESS_COMPLETE: &struct iwl_nvm_access_complete_cmd 17 */ 18 NVM_ACCESS_COMPLETE = 0x0, 19 20 /** 21 * @LARI_CONFIG_CHANGE: &struct iwl_lari_config_change_cmd_v1, 22 * &struct iwl_lari_config_change_cmd_v2, 23 * &struct iwl_lari_config_change_cmd_v3, 24 * &struct iwl_lari_config_change_cmd_v4, 25 * &struct iwl_lari_config_change_cmd_v5, 26 * &struct iwl_lari_config_change_cmd_v6 or 27 * &struct iwl_lari_config_change_cmd_v7 28 */ 29 LARI_CONFIG_CHANGE = 0x1, 30 31 /** 32 * @NVM_GET_INFO: 33 * Command is &struct iwl_nvm_get_info, 34 * response is &struct iwl_nvm_get_info_rsp 35 */ 36 NVM_GET_INFO = 0x2, 37 38 /** 39 * @TAS_CONFIG: &union iwl_tas_config_cmd 40 */ 41 TAS_CONFIG = 0x3, 42 43 /** 44 * @SAR_OFFSET_MAPPING_TABLE_CMD: &struct iwl_sar_offset_mapping_cmd 45 */ 46 SAR_OFFSET_MAPPING_TABLE_CMD = 0x4, 47 48 /** 49 * @UATS_TABLE_CMD: &struct iwl_uats_table_cmd 50 */ 51 UATS_TABLE_CMD = 0x5, 52 53 /** 54 * @PNVM_INIT_COMPLETE_NTFY: &struct iwl_pnvm_init_complete_ntfy 55 */ 56 PNVM_INIT_COMPLETE_NTFY = 0xFE, 57}; 58 59/** 60 * enum iwl_nvm_access_op - NVM access opcode 61 * @IWL_NVM_READ: read NVM 62 * @IWL_NVM_WRITE: write NVM 63 */ 64enum iwl_nvm_access_op { 65 IWL_NVM_READ = 0, 66 IWL_NVM_WRITE = 1, 67}; 68 69/** 70 * enum iwl_nvm_access_target - target of the NVM_ACCESS_CMD 71 * @NVM_ACCESS_TARGET_CACHE: access the cache 72 * @NVM_ACCESS_TARGET_OTP: access the OTP 73 * @NVM_ACCESS_TARGET_EEPROM: access the EEPROM 74 */ 75enum iwl_nvm_access_target { 76 NVM_ACCESS_TARGET_CACHE = 0, 77 NVM_ACCESS_TARGET_OTP = 1, 78 NVM_ACCESS_TARGET_EEPROM = 2, 79}; 80 81/** 82 * enum iwl_nvm_section_type - section types for NVM_ACCESS_CMD 83 * @NVM_SECTION_TYPE_SW: software section 84 * @NVM_SECTION_TYPE_REGULATORY: regulatory section 85 * @NVM_SECTION_TYPE_CALIBRATION: calibration section 86 * @NVM_SECTION_TYPE_PRODUCTION: production section 87 * @NVM_SECTION_TYPE_REGULATORY_SDP: regulatory section used by 3168 series 88 * @NVM_SECTION_TYPE_MAC_OVERRIDE: MAC override section 89 * @NVM_SECTION_TYPE_PHY_SKU: PHY SKU section 90 * @NVM_MAX_NUM_SECTIONS: number of sections 91 */ 92enum iwl_nvm_section_type { 93 NVM_SECTION_TYPE_SW = 1, 94 NVM_SECTION_TYPE_REGULATORY = 3, 95 NVM_SECTION_TYPE_CALIBRATION = 4, 96 NVM_SECTION_TYPE_PRODUCTION = 5, 97 NVM_SECTION_TYPE_REGULATORY_SDP = 8, 98 NVM_SECTION_TYPE_MAC_OVERRIDE = 11, 99 NVM_SECTION_TYPE_PHY_SKU = 12, 100 NVM_MAX_NUM_SECTIONS = 13, 101}; 102 103/** 104 * struct iwl_nvm_access_cmd - Request the device to send an NVM section 105 * @op_code: &enum iwl_nvm_access_op 106 * @target: &enum iwl_nvm_access_target 107 * @type: &enum iwl_nvm_section_type 108 * @offset: offset in bytes into the section 109 * @length: in bytes, to read/write 110 * @data: if write operation, the data to write. On read its empty 111 */ 112struct iwl_nvm_access_cmd { 113 u8 op_code; 114 u8 target; 115 __le16 type; 116 __le16 offset; 117 __le16 length; 118 u8 data[]; 119} __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */ 120 121/** 122 * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD 123 * @offset: offset in bytes into the section 124 * @length: in bytes, either how much was written or read 125 * @type: NVM_SECTION_TYPE_* 126 * @status: 0 for success, fail otherwise 127 * @data: if read operation, the data returned. Empty on write. 128 */ 129struct iwl_nvm_access_resp { 130 __le16 offset; 131 __le16 length; 132 __le16 type; 133 __le16 status; 134 u8 data[]; 135} __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_2 */ 136 137/* 138 * struct iwl_nvm_get_info - request to get NVM data 139 */ 140struct iwl_nvm_get_info { 141 __le32 reserved; 142} __packed; /* REGULATORY_NVM_GET_INFO_CMD_API_S_VER_1 */ 143 144/** 145 * enum iwl_nvm_info_general_flags - flags in NVM_GET_INFO resp 146 * @NVM_GENERAL_FLAGS_EMPTY_OTP: 1 if OTP is empty 147 */ 148enum iwl_nvm_info_general_flags { 149 NVM_GENERAL_FLAGS_EMPTY_OTP = BIT(0), 150}; 151 152/** 153 * struct iwl_nvm_get_info_general - general NVM data 154 * @flags: bit 0: 1 - empty, 0 - non-empty 155 * @nvm_version: nvm version 156 * @board_type: board type 157 * @n_hw_addrs: number of reserved MAC addresses 158 */ 159struct iwl_nvm_get_info_general { 160 __le32 flags; 161 __le16 nvm_version; 162 u8 board_type; 163 u8 n_hw_addrs; 164} __packed; /* REGULATORY_NVM_GET_INFO_GENERAL_S_VER_2 */ 165 166/** 167 * enum iwl_nvm_mac_sku_flags - flags in &iwl_nvm_get_info_sku 168 * @NVM_MAC_SKU_FLAGS_BAND_2_4_ENABLED: true if 2.4 band enabled 169 * @NVM_MAC_SKU_FLAGS_BAND_5_2_ENABLED: true if 5.2 band enabled 170 * @NVM_MAC_SKU_FLAGS_802_11N_ENABLED: true if 11n enabled 171 * @NVM_MAC_SKU_FLAGS_802_11AC_ENABLED: true if 11ac enabled 172 * @NVM_MAC_SKU_FLAGS_MIMO_DISABLED: true if MIMO disabled 173 * @NVM_MAC_SKU_FLAGS_WAPI_ENABLED: true if WAPI enabled 174 * @NVM_MAC_SKU_FLAGS_REG_CHECK_ENABLED: true if regulatory checker enabled 175 * @NVM_MAC_SKU_FLAGS_API_LOCK_ENABLED: true if API lock enabled 176 */ 177enum iwl_nvm_mac_sku_flags { 178 NVM_MAC_SKU_FLAGS_BAND_2_4_ENABLED = BIT(0), 179 NVM_MAC_SKU_FLAGS_BAND_5_2_ENABLED = BIT(1), 180 NVM_MAC_SKU_FLAGS_802_11N_ENABLED = BIT(2), 181 NVM_MAC_SKU_FLAGS_802_11AC_ENABLED = BIT(3), 182 /** 183 * @NVM_MAC_SKU_FLAGS_802_11AX_ENABLED: true if 11ax enabled 184 */ 185 NVM_MAC_SKU_FLAGS_802_11AX_ENABLED = BIT(4), 186 NVM_MAC_SKU_FLAGS_MIMO_DISABLED = BIT(5), 187 NVM_MAC_SKU_FLAGS_WAPI_ENABLED = BIT(8), 188 NVM_MAC_SKU_FLAGS_REG_CHECK_ENABLED = BIT(14), 189 NVM_MAC_SKU_FLAGS_API_LOCK_ENABLED = BIT(15), 190}; 191 192/** 193 * struct iwl_nvm_get_info_sku - mac information 194 * @mac_sku_flags: flags for SKU, see &enum iwl_nvm_mac_sku_flags 195 */ 196struct iwl_nvm_get_info_sku { 197 __le32 mac_sku_flags; 198} __packed; /* REGULATORY_NVM_GET_INFO_MAC_SKU_SECTION_S_VER_2 */ 199 200/** 201 * struct iwl_nvm_get_info_phy - phy information 202 * @tx_chains: BIT 0 chain A, BIT 1 chain B 203 * @rx_chains: BIT 0 chain A, BIT 1 chain B 204 */ 205struct iwl_nvm_get_info_phy { 206 __le32 tx_chains; 207 __le32 rx_chains; 208} __packed; /* REGULATORY_NVM_GET_INFO_PHY_SKU_SECTION_S_VER_1 */ 209 210#define IWL_NUM_CHANNELS_V1 51 211#define IWL_NUM_CHANNELS 110 212 213/** 214 * struct iwl_nvm_get_info_regulatory - regulatory information 215 * @lar_enabled: is LAR enabled 216 * @channel_profile: regulatory data of this channel 217 * @reserved: reserved 218 */ 219struct iwl_nvm_get_info_regulatory_v1 { 220 __le32 lar_enabled; 221 __le16 channel_profile[IWL_NUM_CHANNELS_V1]; 222 __le16 reserved; 223} __packed; /* REGULATORY_NVM_GET_INFO_REGULATORY_S_VER_1 */ 224 225/** 226 * struct iwl_nvm_get_info_regulatory - regulatory information 227 * @lar_enabled: is LAR enabled 228 * @n_channels: number of valid channels in the array 229 * @channel_profile: regulatory data of this channel 230 */ 231struct iwl_nvm_get_info_regulatory { 232 __le32 lar_enabled; 233 __le32 n_channels; 234 __le32 channel_profile[IWL_NUM_CHANNELS]; 235} __packed; /* REGULATORY_NVM_GET_INFO_REGULATORY_S_VER_2 */ 236 237/** 238 * struct iwl_nvm_get_info_rsp_v3 - response to get NVM data 239 * @general: general NVM data 240 * @mac_sku: data relating to MAC sku 241 * @phy_sku: data relating to PHY sku 242 * @regulatory: regulatory data 243 */ 244struct iwl_nvm_get_info_rsp_v3 { 245 struct iwl_nvm_get_info_general general; 246 struct iwl_nvm_get_info_sku mac_sku; 247 struct iwl_nvm_get_info_phy phy_sku; 248 struct iwl_nvm_get_info_regulatory_v1 regulatory; 249} __packed; /* REGULATORY_NVM_GET_INFO_RSP_API_S_VER_3 */ 250 251/** 252 * struct iwl_nvm_get_info_rsp - response to get NVM data 253 * @general: general NVM data 254 * @mac_sku: data relating to MAC sku 255 * @phy_sku: data relating to PHY sku 256 * @regulatory: regulatory data 257 */ 258struct iwl_nvm_get_info_rsp { 259 struct iwl_nvm_get_info_general general; 260 struct iwl_nvm_get_info_sku mac_sku; 261 struct iwl_nvm_get_info_phy phy_sku; 262 struct iwl_nvm_get_info_regulatory regulatory; 263} __packed; /* REGULATORY_NVM_GET_INFO_RSP_API_S_VER_4 */ 264 265/** 266 * struct iwl_nvm_access_complete_cmd - NVM_ACCESS commands are completed 267 * @reserved: reserved 268 */ 269struct iwl_nvm_access_complete_cmd { 270 __le32 reserved; 271} __packed; /* NVM_ACCESS_COMPLETE_CMD_API_S_VER_1 */ 272 273#define IWL_MCC_US 0x5553 274#define IWL_MCC_CANADA 0x4341 275 276/** 277 * struct iwl_mcc_update_cmd - Request the device to update geographic 278 * regulatory profile according to the given MCC (Mobile Country Code). 279 * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. 280 * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the 281 * MCC in the cmd response will be the relevant MCC in the NVM. 282 * @mcc: given mobile country code 283 * @source_id: the source from where we got the MCC, see iwl_mcc_source 284 * @reserved: reserved for alignment 285 * @key: integrity key for MCC API OEM testing 286 * @reserved2: reserved 287 */ 288struct iwl_mcc_update_cmd { 289 __le16 mcc; 290 u8 source_id; 291 u8 reserved; 292 __le32 key; 293 u8 reserved2[20]; 294} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */ 295 296/** 297 * enum iwl_geo_information - geographic information. 298 * @GEO_NO_INFO: no special info for this geo profile. 299 * @GEO_WMM_ETSI_5GHZ_INFO: this geo profile limits the WMM params 300 * for the 5 GHz band. 301 */ 302enum iwl_geo_information { 303 GEO_NO_INFO = 0, 304 GEO_WMM_ETSI_5GHZ_INFO = BIT(0), 305}; 306 307/** 308 * struct iwl_mcc_update_resp_v3 - response to MCC_UPDATE_CMD. 309 * Contains the new channel control profile map, if changed, and the new MCC 310 * (mobile country code). 311 * The new MCC may be different than what was requested in MCC_UPDATE_CMD. 312 * @status: see &enum iwl_mcc_update_status 313 * @mcc: the new applied MCC 314 * @cap: capabilities for all channels which matches the MCC 315 * @source_id: the MCC source, see iwl_mcc_source 316 * @time: time elapsed from the MCC test start (in units of 30 seconds) 317 * @geo_info: geographic specific profile information 318 * see &enum iwl_geo_information. 319 * @n_channels: number of channels in @channels_data. 320 * @channels: channel control data map, DWORD for each channel. Only the first 321 * 16bits are used. 322 */ 323struct iwl_mcc_update_resp_v3 { 324 __le32 status; 325 __le16 mcc; 326 u8 cap; 327 u8 source_id; 328 __le16 time; 329 __le16 geo_info; 330 __le32 n_channels; 331 __le32 channels[]; 332} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_3 */ 333 334/** 335 * struct iwl_mcc_update_resp_v4 - response to MCC_UPDATE_CMD. 336 * Contains the new channel control profile map, if changed, and the new MCC 337 * (mobile country code). 338 * The new MCC may be different than what was requested in MCC_UPDATE_CMD. 339 * @status: see &enum iwl_mcc_update_status 340 * @mcc: the new applied MCC 341 * @cap: capabilities for all channels which matches the MCC 342 * @time: time elapsed from the MCC test start (in units of 30 seconds) 343 * @geo_info: geographic specific profile information 344 * see &enum iwl_geo_information. 345 * @source_id: the MCC source, see iwl_mcc_source 346 * @reserved: for four bytes alignment. 347 * @n_channels: number of channels in @channels_data. 348 * @channels: channel control data map, DWORD for each channel. Only the first 349 * 16bits are used. 350 */ 351struct iwl_mcc_update_resp_v4 { 352 __le32 status; 353 __le16 mcc; 354 __le16 cap; 355 __le16 time; 356 __le16 geo_info; 357 u8 source_id; 358 u8 reserved[3]; 359 __le32 n_channels; 360 __le32 channels[]; 361} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_4 */ 362 363/** 364 * struct iwl_mcc_update_resp_v8 - response to MCC_UPDATE_CMD. 365 * Contains the new channel control profile map, if changed, and the new MCC 366 * (mobile country code). 367 * The new MCC may be different than what was requested in MCC_UPDATE_CMD. 368 * @status: see &enum iwl_mcc_update_status 369 * @mcc: the new applied MCC 370 * @padding: padding for 2 bytes. 371 * @cap: capabilities for all channels which matches the MCC 372 * @time: time elapsed from the MCC test start (in units of 30 seconds) 373 * @geo_info: geographic specific profile information 374 * see &enum iwl_geo_information. 375 * @source_id: the MCC source, see iwl_mcc_source 376 * @reserved: for four bytes alignment. 377 * @n_channels: number of channels in @channels_data. 378 * @channels: channel control data map, DWORD for each channel. Only the first 379 * 16bits are used. 380 */ 381struct iwl_mcc_update_resp_v8 { 382 __le32 status; 383 __le16 mcc; 384 u8 padding[2]; 385 __le32 cap; 386 __le16 time; 387 __le16 geo_info; 388 u8 source_id; 389 u8 reserved[3]; 390 __le32 n_channels; 391 __le32 channels[]; 392} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_8 */ 393 394/** 395 * struct iwl_mcc_chub_notif - chub notifies of mcc change 396 * (MCC_CHUB_UPDATE_CMD = 0xc9) 397 * The Chub (Communication Hub, CommsHUB) is a HW component that connects to 398 * the cellular and connectivity cores that gets updates of the mcc, and 399 * notifies the ucode directly of any mcc change. 400 * The ucode requests the driver to request the device to update geographic 401 * regulatory profile according to the given MCC (Mobile Country Code). 402 * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. 403 * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the 404 * MCC in the cmd response will be the relevant MCC in the NVM. 405 * @mcc: given mobile country code 406 * @source_id: identity of the change originator, see iwl_mcc_source 407 * @reserved1: reserved for alignment 408 */ 409struct iwl_mcc_chub_notif { 410 __le16 mcc; 411 u8 source_id; 412 u8 reserved1; 413} __packed; /* LAR_MCC_NOTIFY_S */ 414 415enum iwl_mcc_update_status { 416 MCC_RESP_NEW_CHAN_PROFILE, 417 MCC_RESP_SAME_CHAN_PROFILE, 418 MCC_RESP_INVALID, 419 MCC_RESP_NVM_DISABLED, 420 MCC_RESP_ILLEGAL, 421 MCC_RESP_LOW_PRIORITY, 422 MCC_RESP_TEST_MODE_ACTIVE, 423 MCC_RESP_TEST_MODE_NOT_ACTIVE, 424 MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE, 425}; 426 427enum iwl_mcc_source { 428 MCC_SOURCE_OLD_FW = 0, 429 MCC_SOURCE_ME = 1, 430 MCC_SOURCE_BIOS = 2, 431 MCC_SOURCE_3G_LTE_HOST = 3, 432 MCC_SOURCE_3G_LTE_DEVICE = 4, 433 MCC_SOURCE_WIFI = 5, 434 MCC_SOURCE_RESERVED = 6, 435 MCC_SOURCE_DEFAULT = 7, 436 MCC_SOURCE_UNINITIALIZED = 8, 437 MCC_SOURCE_MCC_API = 9, 438 MCC_SOURCE_GET_CURRENT = 0x10, 439 MCC_SOURCE_GETTING_MCC_TEST_MODE = 0x11, 440}; 441 442/** 443 * struct iwl_tas_config_cmd_common - configures the TAS. 444 * This is also the v2 structure. 445 * @block_list_size: size of relevant field in block_list_array 446 * @block_list_array: list of countries where TAS must be disabled 447 */ 448struct iwl_tas_config_cmd_common { 449 __le32 block_list_size; 450 __le32 block_list_array[IWL_WTAS_BLACK_LIST_MAX]; 451} __packed; /* TAS_CONFIG_CMD_API_S_VER_2 */ 452 453/** 454 * struct iwl_tas_config_cmd_v3 - configures the TAS 455 * @override_tas_iec: indicates whether to override default value of IEC regulatory 456 * @enable_tas_iec: in case override_tas_iec is set - 457 * indicates whether IEC regulatory is enabled or disabled 458 */ 459struct iwl_tas_config_cmd_v3 { 460 __le16 override_tas_iec; 461 __le16 enable_tas_iec; 462} __packed; /* TAS_CONFIG_CMD_API_S_VER_3 */ 463 464/** 465 * struct iwl_tas_config_cmd_v4 - configures the TAS 466 * @override_tas_iec: indicates whether to override default value of IEC regulatory 467 * @enable_tas_iec: in case override_tas_iec is set - 468 * indicates whether IEC regulatory is enabled or disabled 469 * @usa_tas_uhb_allowed: if set, allow TAS UHB in the USA 470 * @reserved: reserved 471*/ 472struct iwl_tas_config_cmd_v4 { 473 u8 override_tas_iec; 474 u8 enable_tas_iec; 475 u8 usa_tas_uhb_allowed; 476 u8 reserved; 477} __packed; /* TAS_CONFIG_CMD_API_S_VER_4 */ 478 479struct iwl_tas_config_cmd { 480 struct iwl_tas_config_cmd_common common; 481 union { 482 struct iwl_tas_config_cmd_v3 v3; 483 struct iwl_tas_config_cmd_v4 v4; 484 }; 485}; 486 487/** 488 * enum iwl_lari_config_masks - bit masks for the various LARI config operations 489 * @LARI_CONFIG_DISABLE_11AC_UKRAINE_MSK: disable 11ac in ukraine 490 * @LARI_CONFIG_CHANGE_ETSI_TO_PASSIVE_MSK: ETSI 5.8GHz SRD passive scan 491 * @LARI_CONFIG_CHANGE_ETSI_TO_DISABLED_MSK: ETSI 5.8GHz SRD disabled 492 * @LARI_CONFIG_ENABLE_5G2_IN_INDONESIA_MSK: enable 5.15/5.35GHz bands in 493 * Indonesia 494 * @LARI_CONFIG_ENABLE_CHINA_22_REG_SUPPORT_MSK: enable 2022 china regulatory 495 */ 496enum iwl_lari_config_masks { 497 LARI_CONFIG_DISABLE_11AC_UKRAINE_MSK = BIT(0), 498 LARI_CONFIG_CHANGE_ETSI_TO_PASSIVE_MSK = BIT(1), 499 LARI_CONFIG_CHANGE_ETSI_TO_DISABLED_MSK = BIT(2), 500 LARI_CONFIG_ENABLE_5G2_IN_INDONESIA_MSK = BIT(3), 501 LARI_CONFIG_ENABLE_CHINA_22_REG_SUPPORT_MSK = BIT(7), 502}; 503 504#define IWL_11AX_UKRAINE_MASK 3 505#define IWL_11AX_UKRAINE_SHIFT 8 506 507/** 508 * struct iwl_lari_config_change_cmd_v1 - change LARI configuration 509 * @config_bitmap: bit map of the config commands. each bit will trigger a 510 * different predefined FW config operation 511 */ 512struct iwl_lari_config_change_cmd_v1 { 513 __le32 config_bitmap; 514} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_1 */ 515 516/** 517 * struct iwl_lari_config_change_cmd_v2 - change LARI configuration 518 * @config_bitmap: bit map of the config commands. each bit will trigger a 519 * different predefined FW config operation 520 * @oem_uhb_allow_bitmap: bitmap of UHB enabled MCC sets 521 */ 522struct iwl_lari_config_change_cmd_v2 { 523 __le32 config_bitmap; 524 __le32 oem_uhb_allow_bitmap; 525} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_2 */ 526 527/** 528 * struct iwl_lari_config_change_cmd_v3 - change LARI configuration 529 * @config_bitmap: bit map of the config commands. each bit will trigger a 530 * different predefined FW config operation 531 * @oem_uhb_allow_bitmap: bitmap of UHB enabled MCC sets 532 * @oem_11ax_allow_bitmap: bitmap of 11ax allowed MCCs. 533 * For each supported country, a pair of regulatory override bit and 11ax mode exist 534 * in the bit field. 535 */ 536struct iwl_lari_config_change_cmd_v3 { 537 __le32 config_bitmap; 538 __le32 oem_uhb_allow_bitmap; 539 __le32 oem_11ax_allow_bitmap; 540} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_3 */ 541 542/** 543 * struct iwl_lari_config_change_cmd_v4 - change LARI configuration 544 * @config_bitmap: Bitmap of the config commands. Each bit will trigger a 545 * different predefined FW config operation. 546 * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets. 547 * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits 548 * per country, one to indicate whether to override and the other to 549 * indicate the value to use. 550 * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits 551 * per country, one to indicate whether to override and the other to 552 * indicate allow/disallow unii4 channels. 553 */ 554struct iwl_lari_config_change_cmd_v4 { 555 __le32 config_bitmap; 556 __le32 oem_uhb_allow_bitmap; 557 __le32 oem_11ax_allow_bitmap; 558 __le32 oem_unii4_allow_bitmap; 559} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_4 */ 560 561/** 562 * struct iwl_lari_config_change_cmd_v5 - change LARI configuration 563 * @config_bitmap: Bitmap of the config commands. Each bit will trigger a 564 * different predefined FW config operation. 565 * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets. 566 * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits 567 * per country, one to indicate whether to override and the other to 568 * indicate the value to use. 569 * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits 570 * per country, one to indicate whether to override and the other to 571 * indicate allow/disallow unii4 channels. 572 * @chan_state_active_bitmap: Bitmap for overriding channel state to active. 573 * Each bit represents a country or region to activate, according to the BIOS 574 * definitions. 575 */ 576struct iwl_lari_config_change_cmd_v5 { 577 __le32 config_bitmap; 578 __le32 oem_uhb_allow_bitmap; 579 __le32 oem_11ax_allow_bitmap; 580 __le32 oem_unii4_allow_bitmap; 581 __le32 chan_state_active_bitmap; 582} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_5 */ 583 584/** 585 * struct iwl_lari_config_change_cmd_v6 - change LARI configuration 586 * @config_bitmap: Bitmap of the config commands. Each bit will trigger a 587 * different predefined FW config operation. 588 * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets. 589 * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits 590 * per country, one to indicate whether to override and the other to 591 * indicate the value to use. 592 * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits 593 * per country, one to indicate whether to override and the other to 594 * indicate allow/disallow unii4 channels. 595 * @chan_state_active_bitmap: Bitmap for overriding channel state to active. 596 * Each bit represents a country or region to activate, according to the BIOS 597 * definitions. 598 * @force_disable_channels_bitmap: Bitmap of disabled bands/channels. 599 * Each bit represents a set of channels in a specific band that should be disabled 600 */ 601struct iwl_lari_config_change_cmd_v6 { 602 __le32 config_bitmap; 603 __le32 oem_uhb_allow_bitmap; 604 __le32 oem_11ax_allow_bitmap; 605 __le32 oem_unii4_allow_bitmap; 606 __le32 chan_state_active_bitmap; 607 __le32 force_disable_channels_bitmap; 608} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_6 */ 609 610/** 611 * struct iwl_lari_config_change_cmd_v7 - change LARI configuration 612 * This structure is used also for lari cmd version 8. 613 * @config_bitmap: Bitmap of the config commands. Each bit will trigger a 614 * different predefined FW config operation. 615 * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets. 616 * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits 617 * per country, one to indicate whether to override and the other to 618 * indicate the value to use. 619 * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits 620 * per country, one to indicate whether to override and the other to 621 * indicate allow/disallow unii4 channels. 622 * @chan_state_active_bitmap: Bitmap to enable different bands per country 623 * or region. 624 * Each bit represents a country or region, and a band to activate 625 * according to the BIOS definitions. 626 * For LARI cmd version 7 - bits 0:3 are supported. 627 * For LARI cmd version 8 - bits 0:4 are supported. 628 * @force_disable_channels_bitmap: Bitmap of disabled bands/channels. 629 * Each bit represents a set of channels in a specific band that should be 630 * disabled 631 * @edt_bitmap: Bitmap of energy detection threshold table. 632 * Disable/enable the EDT optimization method for different band. 633 */ 634struct iwl_lari_config_change_cmd_v7 { 635 __le32 config_bitmap; 636 __le32 oem_uhb_allow_bitmap; 637 __le32 oem_11ax_allow_bitmap; 638 __le32 oem_unii4_allow_bitmap; 639 __le32 chan_state_active_bitmap; 640 __le32 force_disable_channels_bitmap; 641 __le32 edt_bitmap; 642} __packed; 643/* LARI_CHANGE_CONF_CMD_S_VER_7 */ 644/* LARI_CHANGE_CONF_CMD_S_VER_8 */ 645 646/* Activate UNII-1 (5.2GHz) for World Wide */ 647#define ACTIVATE_5G2_IN_WW_MASK BIT(4) 648 649/** 650 * struct iwl_pnvm_init_complete_ntfy - PNVM initialization complete 651 * @status: PNVM image loading status 652 */ 653struct iwl_pnvm_init_complete_ntfy { 654 __le32 status; 655} __packed; /* PNVM_INIT_COMPLETE_NTFY_S_VER_1 */ 656 657#define UATS_TABLE_ROW_SIZE 26 658#define UATS_TABLE_COL_SIZE 13 659 660/** 661 * struct iwl_uats_table_cmd - struct for UATS_TABLE_CMD 662 * @offset_map: mapping a mcc to UHB AP type support (UATS) allowed 663 * @reserved: reserved 664 */ 665struct iwl_uats_table_cmd { 666 u8 offset_map[UATS_TABLE_ROW_SIZE][UATS_TABLE_COL_SIZE]; 667 __le16 reserved; 668} __packed; /* UATS_TABLE_CMD_S_VER_1 */ 669 670#endif /* __iwl_fw_api_nvm_reg_h__ */ 671